diff mbox series

[5.13,339/800] sched/rt: Fix RT utilization tracking during policy change

Message ID 20210712061002.830074836@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH July 12, 2021, 6:06 a.m. UTC 
From: Vincent Donnefort <vincent.donnefort@arm.com>

[ Upstream commit fecfcbc288e9f4923f40fd23ca78a6acdc7fdf6c ]

RT keeps track of the utilization on a per-rq basis with the structure
avg_rt. This utilization is updated during task_tick_rt(),
put_prev_task_rt() and set_next_task_rt(). However, when the current
running task changes its policy, set_next_task_rt() which would usually
take care of updating the utilization when the rq starts running RT tasks,
will not see a such change, leaving the avg_rt structure outdated. When
that very same task will be dequeued later, put_prev_task_rt() will then
update the utilization, based on a wrong last_update_time, leading to a
huge spike in the RT utilization signal.

The signal would eventually recover from this issue after few ms. Even if
no RT tasks are run, avg_rt is also updated in __update_blocked_others().
But as the CPU capacity depends partly on the avg_rt, this issue has
nonetheless a significant impact on the scheduler.

Fix this issue by ensuring a load update when a running task changes
its policy to RT.

Fixes: 371bf427 ("sched/rt: Add rt_rq utilization tracking")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/1624271872-211872-2-git-send-email-vincent.donnefort@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/rt.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index c286e5ba3c94..3b1b8b025b74 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -2331,13 +2331,20 @@  void __init init_sched_rt_class(void)
 static void switched_to_rt(struct rq *rq, struct task_struct *p)
 {
 	/*
-	 * If we are already running, then there's nothing
-	 * that needs to be done. But if we are not running
-	 * we may need to preempt the current running task.
-	 * If that current running task is also an RT task
+	 * If we are running, update the avg_rt tracking, as the running time
+	 * will now on be accounted into the latter.
+	 */
+	if (task_current(rq, p)) {
+		update_rt_rq_load_avg(rq_clock_pelt(rq), rq, 0);
+		return;
+	}
+
+	/*
+	 * If we are not running we may need to preempt the current
+	 * running task. If that current running task is also an RT task
 	 * then see if we can move to another run queue.
 	 */
-	if (task_on_rq_queued(p) && rq->curr != p) {
+	if (task_on_rq_queued(p)) {
 #ifdef CONFIG_SMP
 		if (p->nr_cpus_allowed > 1 && rq->rt.overloaded)
 			rt_queue_push_tasks(rq);