diff mbox series

[5.13,797/800] mmc: block: Disable CMDQ on the ioctl path

Message ID 20210712061051.432735509@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH July 12, 2021, 6:13 a.m. UTC 
From: Bean Huo <beanhuo@micron.com>

commit 70b52f09080565030a530a784f1c9948a7f48ca3 upstream.

According to the eMMC Spec:
"When command queuing is enabled (CMDQ Mode En bit in CMDQ_MODE_EN
field is set to ‘1’) class 11 commands are the only method through
which data transfer tasks can be issued. Existing data transfer
commands, namely CMD18/CMD17 and CMD25/CMD24, are not supported when
command queuing is enabled."
which means if CMDQ is enabled, the FFU commands will not be supported.
To fix this issue, just simply disable CMDQ on the ioctl path, and
re-enable CMDQ once ioctl request is completed.

Tested-by: Michael Brunner <Michael.Brunner@kontron.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 1e8e55b67030 (mmc: block: Add CQE support)
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210504203209.361597-1-huobean@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/core/block.c |    8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1004,6 +1004,12 @@  static void mmc_blk_issue_drv_op(struct
 
 	switch (mq_rq->drv_op) {
 	case MMC_DRV_OP_IOCTL:
+		if (card->ext_csd.cmdq_en) {
+			ret = mmc_cmdq_disable(card);
+			if (ret)
+				break;
+		}
+		fallthrough;
 	case MMC_DRV_OP_IOCTL_RPMB:
 		idata = mq_rq->drv_op_data;
 		for (i = 0, ret = 0; i < mq_rq->ioc_count; i++) {
@@ -1014,6 +1020,8 @@  static void mmc_blk_issue_drv_op(struct
 		/* Always switch back to main area after RPMB access */
 		if (rpmb_ioctl)
 			mmc_blk_part_switch(card, 0);
+		else if (card->reenable_cmdq && !card->ext_csd.cmdq_en)
+			mmc_cmdq_enable(card);
 		break;
 	case MMC_DRV_OP_BOOT_WP:
 		ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP,