diff mbox series

[5.15,12/33] spi: cadence-quadspi: fix write completion support

Message ID 20220429104052.701673099@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH April 29, 2022, 10:41 a.m. UTC
From: Dinh Nguyen <dinguyen@kernel.org>

commit 98d948eb833104a094517401ed8be26ba3ce9935 upstream.

Some versions of the Cadence QSPI controller does not have the write
completion register implemented(CQSPI_REG_WR_COMPLETION_CTRL). On the
Intel SoCFPGA platform the CQSPI_REG_WR_COMPLETION_CTRL register is
not configured.

Add a quirk to not write to the CQSPI_REG_WR_COMPLETION_CTRL register.

Fixes: 9cb2ff111712 ("spi: cadence-quadspi: Disable Auto-HW polling)
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211108200854.3616121-1-dinguyen@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[IA: backported for linux=5.15.y]
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-cadence-quadspi.c |   24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)
diff mbox series

Patch

--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -36,6 +36,7 @@ 
 /* Quirks */
 #define CQSPI_NEEDS_WR_DELAY		BIT(0)
 #define CQSPI_DISABLE_DAC_MODE		BIT(1)
+#define CQSPI_NO_SUPPORT_WR_COMPLETION	BIT(3)
 
 /* Capabilities */
 #define CQSPI_SUPPORTS_OCTAL		BIT(0)
@@ -83,6 +84,7 @@  struct cqspi_st {
 	u32			wr_delay;
 	bool			use_direct_mode;
 	struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT];
+	bool			wr_completion;
 };
 
 struct cqspi_driver_platdata {
@@ -797,9 +799,11 @@  static int cqspi_write_setup(struct cqsp
 	 * polling on the controller's side. spinand and spi-nor will take
 	 * care of polling the status register.
 	 */
-	reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
-	reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL;
-	writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+	if (cqspi->wr_completion) {
+		reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+		reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL;
+		writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+	}
 
 	reg = readl(reg_base + CQSPI_REG_SIZE);
 	reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
@@ -1532,6 +1536,10 @@  static int cqspi_probe(struct platform_d
 
 	cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk);
 	master->max_speed_hz = cqspi->master_ref_clk_hz;
+
+	/* write completion is supported by default */
+	cqspi->wr_completion = true;
+
 	ddata  = of_device_get_match_data(dev);
 	if (ddata) {
 		if (ddata->quirks & CQSPI_NEEDS_WR_DELAY)
@@ -1541,6 +1549,8 @@  static int cqspi_probe(struct platform_d
 			master->mode_bits |= SPI_RX_OCTAL | SPI_TX_OCTAL;
 		if (!(ddata->quirks & CQSPI_DISABLE_DAC_MODE))
 			cqspi->use_direct_mode = true;
+		if (ddata->quirks & CQSPI_NO_SUPPORT_WR_COMPLETION)
+			cqspi->wr_completion = false;
 	}
 
 	ret = devm_request_irq(dev, irq, cqspi_irq_handler, 0,
@@ -1649,6 +1659,10 @@  static const struct cqspi_driver_platdat
 	.quirks = CQSPI_DISABLE_DAC_MODE,
 };
 
+static const struct cqspi_driver_platdata socfpga_qspi = {
+	.quirks = CQSPI_NO_SUPPORT_WR_COMPLETION,
+};
+
 static const struct of_device_id cqspi_dt_ids[] = {
 	{
 		.compatible = "cdns,qspi-nor",
@@ -1666,6 +1680,10 @@  static const struct of_device_id cqspi_d
 		.compatible = "intel,lgm-qspi",
 		.data = &intel_lgm_qspi,
 	},
+	{
+		.compatible = "intel,socfpga-qspi",
+		.data = (void *)&socfpga_qspi,
+	},
 	{ /* end of table */ }
 };