[PATCHv3,0/6] omap4/omap5: convert to DM model

Message ID	20200616080310.19125-1-t-kristo@ti.com
Headers	show List-Id: U-Boot discussion <u-boot.lists.denx.de> From: t-kristo at ti.com (Tero Kristo) Date: Tue, 16 Jun 2020 11:03:04 +0300 Subject: [PATCHv3 0/6] omap4/omap5: convert to DM model Message-ID: <20200616080310.19125-1-t-kristo@ti.com>
Series	omap4/omap5: convert to DM model \| expand [PATCHv3,0/6] omap4/omap5: convert to DM model [PATCHv3,1/6] omap4: Copy device tree from Linux 5.7.y [PATCHv3,2/6] omap4: panda: convert to device model [PATCHv3,3/6] omap4: Copy device tree from Linux 5.7.y for SDP4430 [PATCHv3,4/6] omap4: sdp: convert to device model [PATCHv3,5/6] omap5: Copy device tree from linux 5.7.y [PATCHv3,6/6] omap5: uevm: convert to device model

Message ID

20200616080310.19125-1-t-kristo@ti.com

Headers

List-Id: U-Boot discussion <u-boot.lists.denx.de>
From: t-kristo at ti.com (Tero Kristo)
Date: Tue, 16 Jun 2020 11:03:04 +0300
Subject: [PATCHv3 0/6] omap4/omap5: convert to DM model
Message-ID: <20200616080310.19125-1-t-kristo@ti.com>

Series

omap4/omap5: convert to DM model | expand

Message

Tero Kristo June 16, 2020, 8:03 a.m. UTC

Hi,

This is a combined series of both omap4/omap5 DM conversion in one.
The main change across all the boards in this version is to drop SPI
support completely. SPI is only available on expansion headers on the
omap4 panda / omap5 uevm boards, and it is impossible for the authors of
the patches in this series to both complete the SPI conversion to DM model,
and test it, so it was deemed better to drop it completely.

Again, if someone from community needs the SPI support later, it should
be relatively straightforward to add it back with proper expertise /
tools.

-Tero


--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Comments

Lokesh Vutla June 18, 2020, 1:49 p.m. UTC | #1

On 16/06/20 1:33 pm, Tero Kristo wrote:
> Hi,
> 
> This is a combined series of both omap4/omap5 DM conversion in one.
> The main change across all the boards in this version is to drop SPI
> support completely. SPI is only available on expansion headers on the
> omap4 panda / omap5 uevm boards, and it is impossible for the authors of
> the patches in this series to both complete the SPI conversion to DM model,
> and test it, so it was deemed better to drop it completely.
> 
> Again, if someone from community needs the SPI support later, it should
> be relatively straightforward to add it back with proper expertise /
> tools.

Applied to u-boot-ti next.

Thanks and regards,
Lokesh