Show patches with: State = Action Required       |    Archived = No       |   5987 patches
« 1 2 ... 13 14 15 … 59 60 »
Patch Series S/W/F Date Submitter Delegate State
[5/5] davinci: omapl138_lcdk: enable OF_SYSTEM_SETUP in defconfig --- 2016-11-25 Fabien Parent New
[4/5] davinci: omapl138_lcdk: do fdt systemsetup when loading DT --- 2016-11-25 Fabien Parent New
[1/5] davinci: omapl138_lcdk: fixup mac address in dtb --- 2016-11-25 Fabien Parent New
[v2,2/4] davinci: omapl138_lcdk: configure ddr2 --- 2016-11-22 Fabien Parent New
[v2,1/4] davinci: omapl138_lcdk: configure pll0 --- 2016-11-22 Fabien Parent New
[3/3] davinci: omapl138_lcdk: add MMC/SD SPL boot support --- 2016-11-16 Fabien Parent New
[1/3] davinci: omapl138_lcdk: use correct AIS config --- 2016-11-16 Fabien Parent New
U-Boot atheros PHY support and cubox ethernet U-Boot atheros PHY support and cubox ethernet --- 2020-06-24 Fabio Estevam New
U-Boot atheros PHY support and cubox ethernet U-Boot atheros PHY support and cubox ethernet --- 2020-06-17 Fabio Estevam New
U-Boot atheros PHY support and cubox ethernet U-Boot atheros PHY support and cubox ethernet --- 2020-06-16 Fabio Estevam New
[v3,5/5] imx: imx8mp_evk: fix boot issue [v3,1/5] imx8mp_evk: spl: drop useless code --- 2020-05-26 Fabio Estevam New
[v3,4/5] imx8mp_evk: spl: no need the code since spl framework could do that [v3,1/5] imx8mp_evk: spl: drop useless code --- 2020-05-26 Fabio Estevam New
[v3,3/5] imx8mp_evk: spl: use spl_early_init [v3,1/5] imx8mp_evk: spl: drop useless code --- 2020-05-26 Fabio Estevam New
[v3,2/5] imx8mp_evk: spl: drop timer_init [v3,1/5] imx8mp_evk: spl: drop useless code --- 2020-05-26 Fabio Estevam New
[v3,1/5] imx8mp_evk: spl: drop useless code [v3,1/5] imx8mp_evk: spl: drop useless code --- 2020-05-26 Fabio Estevam New
imx8mp_evk: Make SPL binary size smaller imx8mp_evk: Make SPL binary size smaller --- 2020-05-08 Fabio Estevam New
imx8mp_evk: Make SPL binary size smaller imx8mp_evk: Make SPL binary size smaller --- 2020-05-07 Fabio Estevam New
[6/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVK Untitled series #47366 --- 2020-05-04 Fabio Estevam New
[1/5] wandboard: Fix detection for mx6q/mx6dl revD1 revariants [1/5] wandboard: Fix detection for mx6q/mx6dl revD1 revariants --- 2020-04-17 Fabio Estevam New
[5/5] wandboard: Remove checkboard() [1/5] wandboard: Fix detection for mx6q/mx6dl revD1 revariants --- 2020-04-17 Fabio Estevam New
[1/5] wandboard: Fix detection for mx6q/mx6dl revD1 revariants [1/5] wandboard: Fix detection for mx6q/mx6dl revD1 revariants --- 2020-04-17 Fabio Estevam New
i.MX8QXP hangs in SPL after a "reboot" command i.MX8QXP hangs in SPL after a "reboot" command --- 2020-04-04 Fabio Estevam New
net: eth-uclass: Do not return error when no MAC is found net: eth-uclass: Do not return error when no MAC is found --- 2020-03-10 Fabio Estevam New
[v2] power-domain: fix hang in endless loop on i.MX8 [v2] power-domain: fix hang in endless loop on i.MX8 --- 2020-02-17 Fabio Estevam New
mx6ulz_14x14_evk: Disable CONFIG_NET mx6ulz_14x14_evk: Disable CONFIG_NET --- 2020-02-03 Fabio Estevam New
[v2] mx6sxsabresd: Keep only one target [v2] mx6sxsabresd: Keep only one target --- 2020-01-27 Fabio Estevam New
U-Boot Logo showing incorrect colors with eLCDIF U-Boot Logo showing incorrect colors with eLCDIF --- 2020-01-24 Fabio Estevam New
mx6sxsabresd: Keep only one target mx6sxsabresd: Keep only one target --- 2020-01-20 Fabio Estevam New
config_whitelist: Remove CONFIG_MX6UL_14X14_EVK_EMMC_REWORK config_whitelist: Remove CONFIG_MX6UL_14X14_EVK_EMMC_REWORK --- 2020-01-18 Fabio Estevam New
mx7ulp: Only enable LDO if it is not already enabled mx7ulp: Only enable LDO if it is not already enabled --- 2020-01-17 Fabio Estevam New
question: mx7ulp - LDO_ENABLED_MODE question: mx7ulp - LDO_ENABLED_MODE --- 2020-01-17 Fabio Estevam New
mx7ulp_evk_plugin: Disable CONFIG_NET mx7ulp_evk_plugin: Disable CONFIG_NET --- 2020-01-17 Fabio Estevam New
question: mx7ulp - LDO_ENABLED_MODE question: mx7ulp - LDO_ENABLED_MODE --- 2020-01-16 Fabio Estevam New
net: eth-uclass: Do not return error when no MAC is found net: eth-uclass: Do not return error when no MAC is found --- 2020-01-09 Fabio Estevam New
imx: imx8qxp_mek: update README imx: imx8qxp_mek: update README --- 2020-01-09 Fabio Estevam New
[11/13] configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes Add support for USB host and peripheral bootmodes on am65x-idk --- 2020-07-02 Faiz Abbas New
[10/13] configs: am65x_evm: Add support for DFU related configs Add support for USB host and peripheral bootmodes on am65x-idk --- 2020-07-02 Faiz Abbas New
[06/13] arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes Add support for USB host and peripheral bootmodes on am65x-idk --- 2020-07-02 Faiz Abbas New
arm: mach-k3: j721e_init: Add support for backup boot modes arm: mach-k3: j721e_init: Add support for backup boot modes --- 2020-05-16 Faiz Abbas New
[v3,02/11] mmc: Add a deferred_probe() API Add Support for eMMC boot in AM65x and J721e --- 2020-02-26 Faiz Abbas New
[2/4] gpio: da8xx_gpio: Add "ti,keystone-gpio" compatible Add Support for gpio0 in J721e --- 2020-01-28 Faiz Abbas New
[1/4] gpio: da8xx_gpio: Fix compiler warning Add Support for gpio0 in J721e --- 2020-01-28 Faiz Abbas New
[v2,08/10] arm: K3: sysfw-loader: Add a config_pm_pre_callback() Add Support for eMMC boot in AM65x and J721e --- 2020-01-24 Faiz Abbas New
[v2,06/10] mmc: am654_sdhci: Implement workaround for card detect Add Support for eMMC boot in AM65x and J721e --- 2020-01-24 Faiz Abbas New
[v2,04/10] mmc: sdhci: Expose sdhci_init() as non-static Untitled series #46045 --- 2020-01-24 Faiz Abbas New
[v2,02/10] mmc: Add init() API Add Support for eMMC boot in AM65x and J721e --- 2020-01-24 Faiz Abbas New
[08/10] mmc: Add init() API Add Support for eMMC boot in AM65x and J721e --- 2020-01-23 Faiz Abbas New
[v2,11/11] beagle_x15: add board support for Beagle x15 --- 2014-11-06 Felipe Balbi New
[11/11] beagle_x15: add board support for Beagle x15 --- 2014-11-06 Felipe Balbi New
[06/11] configs: omap5_common : Boot rootfs from sd card by default --- 2014-11-06 Felipe Balbi New
[2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x --- 2014-07-10 Felipe Balbi New
[2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x --- 2014-06-23 Felipe Balbi New
[4/5] board: ti: am43xx: add AM437x SK PHY Address --- 2014-06-10 Felipe Balbi New
[3/5] board: ti: am43xx: add support for AM43xx Starter Kit --- 2014-06-10 Felipe Balbi New
[3/3] configs: am43xx_evm: make sure to set devtype correctly --- 2014-05-09 Felipe Balbi New
[2/3] board: ti: am43xx: add support for AM43xx Starter Kit --- 2014-05-09 Felipe Balbi New
[3/6] rockchip: efuse: Add support for rk3188 efuse rockchip: efuse: add support for more paltforms --- 2020-02-20 Finley Xiao New
[1/6] rockchip: efuse: Add support for rk3288 efuse rockchip: efuse: add support for more paltforms --- 2020-02-20 Finley Xiao New
[2/6] rockchip: efuse: Add support for rk3066a efuse Untitled series #44959 --- 2020-02-20 Finley Xiao New
[2/2] rockchip: efuse: Add support for rk1808 non-secure efuse rockchip: efuse: add support for more platfroms --- 2020-02-20 Finley Xiao New
[1/2] rockchip: efuse: Add support for rk3328 non-secure efuse [1/2] rockchip: efuse: Add support for rk3328 non-secure efuse --- 2020-02-20 Finley Xiao New
[v1] power: pmic: pca9450: fix i2c address for PCA9450A [v1] power: pmic: pca9450: fix i2c address for PCA9450A --- 2020-07-13 FLAVIO SULIGOI New
imx: distinguish POR from POR+WDOG reset cause for first wd imx: distinguish POR from POR+WDOG reset cause for first wd --- 2020-01-22 FLAVIO SULIGOI New
[v2,1/1] arm64: zynqmp: Enable usb3 for k24 som [v2,1/1] arm64: zynqmp: Enable usb3 for k24 som --- 2023-12-15 Frager, Neal New
[v2,1/1] arm64: zynqmp: Add output-enable pins to SOMs [v2,1/1] arm64: zynqmp: Add output-enable pins to SOMs --- 2023-12-13 Frager, Neal New
[v1,1/1] arm64: zynqmp: Fix k24 psu_init_gpl.c clocking [v1,1/1] arm64: zynqmp: Fix k24 psu_init_gpl.c clocking --- 2023-12-13 Frager, Neal New
[v1,1/1] arm64: zynqmp: Add output-enable pins to SOMs [v1,1/1] arm64: zynqmp: Add output-enable pins to SOMs --- 2023-12-09 Frager, Neal New
[v4,01/30] ti: common: board_detect: Allow settings board detection variables manually [v4,01/30] ti: common: board_detect: Allow settings board detection variables manually --- 2017-06-16 Franklin S Cooper Jr New
[10/31] ARM: Use Kconfig for board EEPROM's I2C bus and chip address [01/31] ti: common: board_detect: Allow settings board detection variables manually --- 2017-03-02 Franklin S Cooper Jr New
[v6,16/16] roc-rk3399-pc: Enable USB3.0 Host Add Rockchip RK3399 USB3.0 Host support --- 2020-05-26 Frank Wang New
[v6,12/16] usb: dwc3: add make compatible for rockchip platform Add Rockchip RK3399 USB3.0 Host support --- 2020-05-26 Frank Wang New
[v6,10/16] usb: dwc3: Enable AutoRetry feature in the controller Add Rockchip RK3399 USB3.0 Host support --- 2020-05-26 Frank Wang New
[v6,09/16] usb: dwc3: Add disable u2mac linestate check quirk Add Rockchip RK3399 USB3.0 Host support --- 2020-05-26 Frank Wang New
[v6,06/16] phy: rockchip: Add Rockchip USB TypeC PHY driver Add Rockchip RK3399 USB3.0 Host support --- 2020-05-26 Frank Wang New
[v6,05/16] phy: rockchip: Add Rockchip USB2PHY driver Add Rockchip RK3399 USB3.0 Host support --- 2020-05-26 Frank Wang New
[v6,03/16] clk: rk3399: Enable/Disable TCPHY clocks Add Rockchip RK3399 USB3.0 Host support --- 2020-05-26 Frank Wang New
[v6,02/16] clk: rk3399: Set empty for TCPHY assigned-clocks Add Rockchip RK3399 USB3.0 Host support --- 2020-05-26 Frank Wang New
[v6,01/16] clk: rk3399: Enable/Disable the USB2PHY clk Add Rockchip RK3399 USB3.0 Host support --- 2020-05-26 Frank Wang New
[v5,05/16] arm64: dts: rk3399: Move u2phy into root port Add Rockchip RK3399 USB3.0 Host support --- 2020-05-13 Frank Wang New
[v3,6/7] ARM: dts: rk3399-evb: usb3.0 host support Add Rockchip RK3399 USB3.0 Host support --- 2020-05-07 Frank Wang New
[v2,9/9] configs: evb-rk3399: update support usb3.0 host Add Rockchip RK3399 USB3.0 Host support --- 2020-04-30 Frank Wang New
[v2,8/9] configs: evb-rk3399: slect type-c phy support Add Rockchip RK3399 USB3.0 Host support --- 2020-04-30 Frank Wang New
[v2,7/9] ARM: dts: rk3399: amend dwc3 related nodes Add Rockchip RK3399 USB3.0 Host support --- 2020-04-30 Frank Wang New
[v2,5/9] phy: rockchip: add a new driver for type-c phy Add Rockchip RK3399 USB3.0 Host support --- 2020-04-30 Frank Wang New
[v2,2/9] usb: dwc3: add dis_u2_freeclk_exists_quirk Add Rockchip RK3399 USB3.0 Host support --- 2020-04-30 Frank Wang New
[v2,1/9] usb: dwc3: add dis_enblslpm_quirk Add Rockchip RK3399 USB3.0 Host support --- 2020-04-30 Frank Wang New
[8/8] configs: evb-rk3399: enable usb3.0 host support Add Rockchip RK3399 USB3.0 Host support --- 2020-04-28 Frank Wang New
[7/8] ARM: dts: rockchip: amend dwc3 nodes to keep in line with kernel Add Rockchip RK3399 USB3.0 Host support --- 2020-04-28 Frank Wang New
[v8,14/14] MAINTAINERS: MediaTek: add USB related files Add support for MediaTek xHCI host controller --- 2020-05-02 Frank Wunderlich New
[v8,13/14] dt-bindings: usb: mtk-xhci: Add binding for MediaTek xHCI host controller Add support for MediaTek xHCI host controller --- 2020-05-02 Frank Wunderlich New
[v8,12/14] dt-bindings: phy-mtk-tphy: add properties of address mapping and clocks Add support for MediaTek xHCI host controller --- 2020-05-02 Frank Wunderlich New
[v8,11/14] arm: dts: mt7629: add usb related nodes Add support for MediaTek xHCI host controller --- 2020-05-02 Frank Wunderlich New
[v8,10/14] xhci: mediatek: Add support for MTK xHCI host controller Add support for MediaTek xHCI host controller --- 2020-05-02 Frank Wunderlich New
[v8,09/14] phy: phy-mtk-tphy: add a new reference clock Add support for MediaTek xHCI host controller --- 2020-05-02 Frank Wunderlich New
[v8,08/14] phy: phy-mtk-tphy: add support new version Add support for MediaTek xHCI host controller --- 2020-05-02 Frank Wunderlich New
[v8,07/14] phy: phy-mtk-tphy: add support USB phys Add support for MediaTek xHCI host controller --- 2020-05-02 Frank Wunderlich New
[v8,06/14] usb: dwc2_udc_otg: use the phy bulk API to get phys Add support for MediaTek xHCI host controller --- 2020-05-02 Frank Wunderlich New
[v8,05/14] usb: dwc3: use the phy bulk API to get phys Add support for MediaTek xHCI host controller --- 2020-05-02 Frank Wunderlich New
[v8,04/14] test: dm: phy: add a test item for the phy_bulk API Add support for MediaTek xHCI host controller --- 2020-05-02 Frank Wunderlich New
[v8,03/14] phy: Add API for a bulk of phys Add support for MediaTek xHCI host controller --- 2020-05-02 Frank Wunderlich New
« 1 2 ... 13 14 15 … 59 60 »