Show patches with: Archived = No       |   19665 patches
« 1 2 3 4 … 196 197 »
Patch Series S/W/F Date Submitter Delegate State
SMDK5250: Add ethernet support --- 2012-01-24 Chander Kashyap Accepted
[v5,1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro --- 2012-01-25 Chander Kashyap Superseded
[v5,2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs --- 2012-01-25 Chander Kashyap Superseded
[v5,3/4] EXYNOS: Add SMDK5250 board support --- 2012-01-25 Chander Kashyap Superseded
[v5,4/4] EXYNOS: SMDK5250: Add MMC SPL support --- 2012-01-25 Chander Kashyap Superseded
[v6,1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro --- 2012-01-25 Chander Kashyap Superseded
[v6,2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs --- 2012-01-25 Chander Kashyap Superseded
[v6,3/4] EXYNOS: Add SMDK5250 board support --- 2012-01-25 Chander Kashyap Superseded
[v6,4/4] EXYNOS: SMDK5250: Add MMC SPL support --- 2012-01-25 Chander Kashyap Superseded
TRATS: Fix uart gpio config --- 2012-01-25 Chander Kashyap Accepted
i.mx: i.mx5: update imx_get_mac_from_fuse function --- 2012-01-31 Jason Hui Accepted
[v7,1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro --- 2012-02-02 Chander Kashyap Superseded
[v7,2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs --- 2012-02-02 Chander Kashyap Superseded
[v7,3/4] EXYNOS: Add SMDK5250 board support --- 2012-02-02 Chander Kashyap Superseded
[v7,4/4] EXYNOS: SMDK5250: Add MMC SPL support --- 2012-02-02 Chander Kashyap Superseded
[v8,1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro --- 2012-02-03 Chander Kashyap Superseded
[v8,2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs --- 2012-02-03 Chander Kashyap Superseded
[v8,3/4] EXYNOS: Add SMDK5250 board support --- 2012-02-03 Chander Kashyap Superseded
[v8,4/4] EXYNOS: SMDK5250: Add MMC SPL support --- 2012-02-03 Chander Kashyap Accepted
[v9,1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro --- 2012-02-06 Chander Kashyap Accepted
[v9,2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs --- 2012-02-06 Chander Kashyap Accepted
[v9,3/4] EXYNOS: Add SMDK5250 board support --- 2012-02-06 Chander Kashyap Accepted
[v9,4/4] EXYNOS: SMDK5250: Add MMC SPL support --- 2012-02-06 Chander Kashyap Accepted
[v2] SMDK5250: Add ethernet support --- 2012-02-09 Chander Kashyap Accepted
EXYNOS: Add structure for Exynos4 DMC --- 2012-03-02 Chander Kashyap Accepted
pci: move pciauto_config_init() to pci.h --- 2012-03-03 Linus Walleij Accepted
integrator: remove fragile delay loop from PCI code --- 2012-03-03 Linus Walleij Accepted
[1/1] arm: vexpress: Fixed get_ticks/get_tbclk build failures --- 2012-03-06 matt.waddel@linaro.org New
EXYNOS: Detect cpuid based on Exynos product codes --- 2012-03-14 Chander Kashyap Rejected
EXYNOS: Rename exynos5_tzpc structure to s5p_tzpc --- 2012-03-14 Chander Kashyap Accepted
[v2] EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc --- 2012-03-15 Chander Kashyap Accepted
i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctly --- 2012-04-11 Jason Hui Accepted
USB: S5P: Add ehci support --- 2012-04-30 Rajeshwari Shinde New
USB: S5P: Add ehci support --- 2012-04-30 Rajeshwari Shinde New
USB: S5P: Add ehci support --- 2012-05-01 Rajeshwari Shinde New
[V2] USB: S5P: Add ehci support --- 2012-05-02 Rajeshwari Shinde Accepted
[1/5] exynos5: Add system register structure --- 2012-05-02 Rajeshwari Shinde New
[2/5] exynos5: Add structure for PMU register --- 2012-05-02 Rajeshwari Shinde Superseded
[3/5] exynos5: Add power Enable/Disable for USB-EHCI --- 2012-05-02 Rajeshwari Shinde New
[4/5] exynos5: usb: Fix incorrect USB base addresses --- 2012-05-02 Rajeshwari Shinde New
[5/5] exynos5: usb: Enable USB 2.0 on smdk5250 --- 2012-05-02 Rajeshwari Shinde New
[1/2] exynos5: pinmux: Added default pinumx settings --- 2012-05-04 Rajeshwari Shinde New
[2/2] exynos: smdk5250: Enable the pinmux setup --- 2012-05-04 Rajeshwari Shinde New
[V3] USB: EXYNOS: Add ehci support --- 2012-05-04 Rajeshwari Shinde New
[1/6,V2] EXYNOS5: Fix system register structure --- 2012-05-04 Rajeshwari Shinde Superseded
[2/6,V2] EXYNOS: Add structure for PMU registers --- 2012-05-04 Rajeshwari Shinde Superseded
[3/6,V2] EXYNOS5 : USB: Set USB 2.0 HOST Link mode --- 2012-05-04 Rajeshwari Shinde New
[4/6,V2] Exynos5: Add power Enable/Disable for USB-EHCI --- 2012-05-04 Rajeshwari Shinde New
[5/6,V2] EXYNOS5: USB: Fix incorrect USB base addresses --- 2012-05-04 Rajeshwari Shinde Superseded
[6/6,V2] config: EXYNOS5: USB: Enable USB 2.0 on smdk5250 --- 2012-05-04 Rajeshwari Shinde Superseded
[1/6,V3] EXYNOS5: Fix system register structure --- 2012-05-08 Rajeshwari Shinde Superseded
[2/6,V3] EXYNOS5: Add structure for PMU registers --- 2012-05-08 Rajeshwari Shinde Superseded
[3/6,V3] USB: EXYNOS: Set USB 2.0 HOST Link mode --- 2012-05-08 Rajeshwari Shinde Superseded
[4/6,V3] EXYNOS: Add power Enable/Disable for USB-EHCI --- 2012-05-08 Rajeshwari Shinde New
[5/6,V3] EXYNOS5: USB: Fix incorrect USB base addresses --- 2012-05-08 Rajeshwari Shinde Superseded
[6/6,V3] CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250 --- 2012-05-08 Rajeshwari Shinde Superseded
[1/6,V4] EXYNOS5: Fix system register structure --- 2012-05-14 Rajeshwari Shinde Accepted
[2/6,V4] EXYNOS5: Add structure for PMU registers --- 2012-05-14 Rajeshwari Shinde Accepted
[3/6,V4] USB: EXYNOS: Set USB 2.0 HOST Link mode --- 2012-05-14 Rajeshwari Shinde Accepted
[4/6,V4] EXYNOS: Add power Enable/Disable for USB-EHCI --- 2012-05-14 Rajeshwari Shinde Accepted
[5/6,V4] EXYNOS5: USB: Fix incorrect USB base addresses --- 2012-05-14 Rajeshwari Shinde Accepted
[6/6,V4] CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250 --- 2012-05-14 Rajeshwari Shinde Accepted
[1/8] EXYNOS: CLK: Add i2c clock --- 2012-05-18 Rajeshwari Shinde New
[2/8] EXYNOS: Add I2C base address. --- 2012-05-18 Rajeshwari Shinde New
[3/8] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-05-18 Rajeshwari Shinde New
[4/8] I2C: Move struct s3c24x0_i2c to a common place. --- 2012-05-18 Rajeshwari Shinde Superseded
[5/8] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-05-18 Rajeshwari Shinde New
[6/8] I2C: Modify the I2C driver for EXYNOS5 --- 2012-05-18 Rajeshwari Shinde New
[7/8] I2C: Add support for Multi channel --- 2012-05-18 Rajeshwari Shinde New
[8/8] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-05-18 Rajeshwari Shinde New
USB: EXYNOS: Incorporate EHCI review comments --- 2012-05-21 Rajeshwari Shinde Accepted
PMIC: MAX77686: Add support for MAX77686 --- 2012-05-21 Rajeshwari Shinde New
integrator: break out common config --- 2012-05-22 Linus Walleij Accepted
[1/2,V2] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-05-23 Rajeshwari Shinde New
[2/2,V2] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-05-23 Rajeshwari Shinde New
[1/2,V2] PMIC: MAX77686: Add support for MAX77686 --- 2012-05-23 Rajeshwari Shinde Superseded
[2/2,V2] PMIC: SMDK5250: Enable MAX77686 pmic chip --- 2012-05-23 Rajeshwari Shinde New
MMC: MSHCI: Add MSHCI driver --- 2012-05-25 Rajeshwari Shinde New
[1/4] EXYNOS: MSHCI: Add clock for EXYNOS5 --- 2012-05-25 Rajeshwari Shinde New
[2/4] EXYNOS5: PINMUX: Add pinmux for SDMMC4 --- 2012-05-25 Rajeshwari Shinde New
[3/4] EXYNOS: Add base address for MSHCI --- 2012-05-25 Rajeshwari Shinde New
[4/4] EXYNOS5: Enable support for MSHCI --- 2012-05-25 Rajeshwari Shinde New
[1/2,V3] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-01 Rajeshwari Shinde New
[2/2,V3] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-01 Rajeshwari Shinde New
[1/2,V4] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-01 Rajeshwari Shinde New
[2/2,V4] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-01 Rajeshwari Shinde New
[1/2,V5] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-05 Rajeshwari Shinde New
[2/2,V5] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-05 Rajeshwari Shinde Superseded
[1/2,V6] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-07 Rajeshwari Shinde Accepted
[2/2,V6] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-07 Rajeshwari Shinde Accepted
[1/8,V2] EXYNOS: CLK: Add i2c clock --- 2012-06-07 Rajeshwari Shinde New
[2/8,V2] EXYNOS: Add I2C base address. --- 2012-06-07 Rajeshwari Shinde New
[3/8,V2] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-06-07 Rajeshwari Shinde Superseded
[4/8,V2] I2C: Move struct s3c24x0_i2c to a common place. --- 2012-06-07 Rajeshwari Shinde Superseded
[5/8,V2] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-06-07 Rajeshwari Shinde New
[6/8,V2] I2C: Modify the I2C driver for EXYNOS5 --- 2012-06-07 Rajeshwari Shinde New
[7/8,V2] I2C: Add support for Multi channel --- 2012-06-07 Rajeshwari Shinde New
[8/8,V2] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-06-07 Rajeshwari Shinde New
[V2] MMC: DWMMC: Add DWMMC driver --- 2012-06-11 Rajeshwari Shinde New
[01/11] snowball: Add support for ux500 based snowball board --- 2012-06-18 Mathieu Poirier Superseded
« 1 2 3 4 … 196 197 »