diff mbox series

[v2,10/17] warp7: Make CONFIG_SYS_FDT_ADDR a define

Message ID 1522708936-7603-11-git-send-email-bryan.odonoghue@linaro.org
State Superseded
Headers show
Series warp7: Enable automated OPTEE/HAB boot flow | expand

Commit Message

Bryan O'Donoghue April 2, 2018, 10:42 p.m. UTC 
In order to sign images with the IMX code-signing-tool (CST) we need to
know the load address of a given image. The best way to derive this load
address is to make it into a define - so that u-boot.cfg contains the
address - which we can then parse when generating the IMX CST headers.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
---
 board/warp7/Kconfig     | 6 ++++++
 include/configs/warp7.h | 2 +-
 2 files changed, 7 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/board/warp7/Kconfig b/board/warp7/Kconfig
index 61c33fb..00df19d 100644
--- a/board/warp7/Kconfig
+++ b/board/warp7/Kconfig
@@ -6,4 +6,10 @@  config SYS_BOARD
 config SYS_CONFIG_NAME
 	default "warp7"
 
+config SYS_FDT_ADDR
+	hex "FDT load address"
+	default 0x83000000
+	help
+	  The address the FDT file should be loaded to.
+
 endif
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index e12b90b..344042c 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -39,7 +39,7 @@ 
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"fdt_file=imx7s-warp.dtb\0" \
-	"fdt_addr=0x83000000\0" \
+	"fdt_addr=" __stringify(CONFIG_SYS_FDT_ADDR)"\0" \
 	"optee_addr=" __stringify(CONFIG_OPTEE_LOAD_ADDR)"\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \