From patchwork Thu Jun 25 12:25:39 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sagar Shrikant Kadam X-Patchwork-Id: 242987 List-Id: U-Boot discussion From: sagar.kadam at sifive.com (Sagar Shrikant Kadam) Date: Thu, 25 Jun 2020 05:25:39 -0700 Subject: [PATCH v2 3/5] fu540: dtsi: add reset producer and consumer entries In-Reply-To: <1593087941-16872-1-git-send-email-sagar.kadam@sifive.com> References: <1593087941-16872-1-git-send-email-sagar.kadam@sifive.com> Message-ID: <1593087941-16872-4-git-send-email-sagar.kadam@sifive.com> The resets to DDR and ethernet sub-system are connected to PRCI device reset control register, these reset signals are active low and are held low at power-up. Add these reset producer and consumer details needed by the reset driver. Signed-off-by: Sagar Shrikant Kadam Reviewed-by: Pragnesh Patel Reviewed-by: Bin Meng --- arch/riscv/dts/fu540-c000-u-boot.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/riscv/dts/fu540-c000-u-boot.dtsi b/arch/riscv/dts/fu540-c000-u-boot.dtsi index 9bba554..b37241e 100644 --- a/arch/riscv/dts/fu540-c000-u-boot.dtsi +++ b/arch/riscv/dts/fu540-c000-u-boot.dtsi @@ -59,6 +59,16 @@ reg = <0x0 0x2000000 0x0 0xc0000>; u-boot,dm-spl; }; + prci: clock-controller at 10000000 { + #reset-cells = <1>; + resets = <&prci PRCI_RST_DDR_CTRL_N>, + <&prci PRCI_RST_DDR_AXI_N>, + <&prci PRCI_RST_DDR_AHB_N>, + <&prci PRCI_RST_DDR_PHY_N>, + <&prci PRCI_RST_GEMGXL_N>; + reset-names = "ddr_ctrl", "ddr_axi", "ddr_ahb", + "ddr_phy", "gemgxl_reset"; + }; dmc: dmc at 100b0000 { compatible = "sifive,fu540-c000-ddr"; reg = <0x0 0x100b0000 0x0 0x0800