From patchwork Fri Jan 10 19:35:22 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrew Davis X-Patchwork-Id: 239441 List-Id: U-Boot discussion From: afd at ti.com (Andrew F. Davis) Date: Fri, 10 Jan 2020 14:35:22 -0500 Subject: [U-Boot] [PATCH v2 5/6] arm: K3: Increase default SYSFW image size allocation In-Reply-To: <20200110193523.2865-1-afd@ti.com> References: <20200110193523.2865-1-afd@ti.com> Message-ID: <20200110193523.2865-6-afd@ti.com> The memory allocated to store the FIT image containing SYSFW and board configuration data is statically defined to the largest size expected. This was 276000 bytes but now needs to be grown to 277000 to make room for the slightly larger SYSFW image used on J721e High-Security devices. Signed-off-by: Andrew F. Davis Reviewed-by: Lokesh Vutla --- arch/arm/mach-k3/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index 5583241943..2e111bbf27 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -119,7 +119,7 @@ config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART config K3_SYSFW_IMAGE_SIZE_MAX int "Amount of memory dynamically allocated for loading SYSFW blob" depends on K3_LOAD_SYSFW - default 276000 + default 277000 help Amount of memory (in bytes) reserved through dynamic allocation at runtime for loading the combined System Firmware and configuration image