From patchwork Sat Jan 11 19:36:36 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Joel Johnson X-Patchwork-Id: 239471 List-Id: U-Boot discussion From: mrjoel at lixil.net (Joel Johnson) Date: Sat, 11 Jan 2020 12:36:36 -0700 Subject: [PATCH 07/10] arm: mvebu: clearfog: add SPI offsets In-Reply-To: <20200111193639.19022-1-mrjoel@lixil.net> References: <20200111193639.19022-1-mrjoel@lixil.net> Message-ID: <20200111193639.19022-7-mrjoel@lixil.net> Add reasonable default SPI offsets and ENV size when configured to boot from SPI flash. Signed-off-by: Joel Johnson --- board/solidrun/clearfog/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/board/solidrun/clearfog/Kconfig b/board/solidrun/clearfog/Kconfig index fd880ee591..ce7fcf653f 100644 --- a/board/solidrun/clearfog/Kconfig +++ b/board/solidrun/clearfog/Kconfig @@ -37,4 +37,16 @@ config CLEARFOG_2GB_SOM Enable support for the 2GB RAM SOM variant. If this option is not enabled then the more common 1GB version will be used. +config ENV_SECT_SIZE + hex "Environment Sector-Size" + # Use SPI flash erase block size of 4 KiB + default 0x1000 if MVEBU_SPL_BOOT_DEVICE_SPI + # Use optimistic 64 KiB erase block, will vary between actual media + default 0x10000 if MVEBU_SPL_BOOT_DEVICE_MMC + +config SYS_SPI_U_BOOT_OFFS + hex "address of u-boot payload in SPI flash" + default 0x20000 + depends on MVEBU_SPL_BOOT_DEVICE_SPI + endmenu