From patchwork Thu Jan 30 13:20:38 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Masahiro Yamada X-Patchwork-Id: 240496 List-Id: U-Boot discussion From: yamada.masahiro at socionext.com (Masahiro Yamada) Date: Thu, 30 Jan 2020 22:20:38 +0900 Subject: [PATCH 2/2] ARM: uniphier: use $loadaddr for source command In-Reply-To: <20200130132038.9757-1-yamada.masahiro@socionext.com> References: <20200130132038.9757-1-yamada.masahiro@socionext.com> Message-ID: <20200130132038.9757-2-yamada.masahiro@socionext.com> If the "source" command is not given the address, it uses CONFIG_SYS_LOAD_ADDR, which is compile-time determined. Using the "loadaddr" environment variable is handier because it is relocated according to the memory base when CONFIG_POSITION_INDEPENDENT is enabled. Signed-off-by: Masahiro Yamada --- include/configs/uniphier.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 29866668c491..b95fb9c93fa9 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -169,17 +169,17 @@ "ubi part UBI && " \ "ubifsmount ubi0:boot && " \ "ubifsload ${loadaddr} ${script} && " \ - "source\0" \ + "source $loadaddr\0" \ "norscript=echo Running ${script} from tftp ... && " \ "tftpboot ${script} &&" \ - "source\0" \ + "source $loadaddr\0" \ "usbscript=usb start && " \ "setenv devtype usb && " \ "setenv devnum 0 && " \ "run loadscript_fat\0" \ "loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \ "load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \ - "source\0" \ + "source $loadaddr\0" \ "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \ "tftpboot $tmp_addr $second_image && " \ "setexpr tmp_addr $nor_base + 0x70000 && " \