diff mbox series

[6/6] ARM: stm32: Implement DDR3 coding on DHCOR SoM

Message ID 20200407090916.2966-6-marex@denx.de
State Superseded
Headers show
Series [1/6] ARM: stm32: Add default config for DHCOR | expand

Commit Message

Marek Vasut April 7, 2020, 9:09 a.m. UTC
The DHCOR board does exist in multiple variants with different DDR3
DRAM sizes. To cater for all of them, implement DDR3 code handling.
There are two GPIOs which code the DRAM size populated on the SoM,
read them out and use the value to pick the correct DDR3 config.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Cc: Patrick Delaunay <patrick.delaunay at st.com>
Cc: Patrice Chotard <patrice.chotard at st.com>
---
 arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi |  2 ++
 arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi |  2 ++
 board/dhelectronics/dh_stm32mp1/board.c    | 26 +++++++++++++++++++++-
 configs/stm32mp15_dhcom_basic_defconfig    |  1 +
 configs/stm32mp15_dhcor_basic_defconfig    |  1 +
 5 files changed, 31 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index fcdc5e6859..54416acd5c 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -5,6 +5,7 @@ 
 
 #include <dt-bindings/clock/stm32mp1-clksrc.h>
 #include "stm32mp157-u-boot.dtsi"
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
 #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
 
 / {
@@ -26,6 +27,7 @@ 
 		st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
 		#gpio-cells = <2>;
 		dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>;
+		dh,ddr3-coding-gpios = <&gpioz 6 0>, <&gpioz 7 0>;
 	};
 
 	led {
diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
index 17a23ae21c..6db4ac37e1 100644
--- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
@@ -9,6 +9,7 @@ 
 
 #include <dt-bindings/clock/stm32mp1-clksrc.h>
 #include "stm32mp157-u-boot.dtsi"
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
 #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
 
 / {
@@ -16,6 +17,7 @@ 
 	config {
 		u-boot,dm-pre-reloc;
 		#gpio-cells = <2>;
+		dh,ddr3-coding-gpios = <&gpiog 0 0>, <&gpiog 1 0>;
 		dh,som-coding-gpios = <&gpioz 7 0>, <&gpiof 3 0>;
 	};
 };
diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c
index b72d113a6f..e0039ebce8 100644
--- a/board/dhelectronics/dh_stm32mp1/board.c
+++ b/board/dhelectronics/dh_stm32mp1/board.c
@@ -135,6 +135,7 @@  int checkboard(void)
 
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 static u8 brdcode __section("data");
+static u8 ddr3code __section("data");
 static u8 somcode __section("data");
 
 static void board_get_coding_straps(void)
@@ -150,6 +151,7 @@  static void board_get_coding_straps(void)
 	}
 
 	brdcode = 0;
+	ddr3code = 0;
 	somcode = 0;
 
 	ret = gpio_request_list_by_name_nodev(node, "dh,som-coding-gpios",
@@ -158,13 +160,34 @@  static void board_get_coding_straps(void)
 	for (i = 0; i < ret; i++)
 		somcode |= !!dm_gpio_get_value(&(gpio[i])) << i;
 
+	ret = gpio_request_list_by_name_nodev(node, "dh,ddr3-coding-gpios",
+					      gpio, ARRAY_SIZE(gpio),
+					      GPIOD_IS_IN);
+	for (i = 0; i < ret; i++)
+		ddr3code |= !!dm_gpio_get_value(&(gpio[i])) << i;
+
 	ret = gpio_request_list_by_name_nodev(node, "dh,board-coding-gpios",
 					      gpio, ARRAY_SIZE(gpio),
 					      GPIOD_IS_IN);
 	for (i = 0; i < ret; i++)
 		brdcode |= !!dm_gpio_get_value(&(gpio[i])) << i;
 
-	printf("Code:  SoM:rev=%d Board:rev=%d\n", somcode, brdcode);
+	printf("Code:  SoM:rev=%d,ddr3=%d Board:rev=%d\n",
+		somcode, ddr3code, brdcode);
+}
+
+int board_stm32mp1_ddr_config_name_match(struct udevice *dev,
+					 const char *name)
+{
+	if (ddr3code == 2 &&
+	    !strcmp(name, "config at ddr3-1066-888-bin-g-1x4gb-533mhz"))
+		return 0;
+
+	if (ddr3code == 3 &&
+	    !strcmp(name, "config at ddr3-1066-888-bin-g-2x4gb-533mhz"))
+		return 0;
+
+	return -EINVAL;
 }
 
 int board_early_init_f(void)
@@ -537,6 +560,7 @@  int board_late_init(void)
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 	env_set_ulong("dh_som_rev", somcode);
 	env_set_ulong("dh_board_rev", brdcode);
+	env_set_ulong("dh_ddr3_code", ddr3code);
 #endif
 
 	return 0;
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
index 9ad7ba9c54..8ca5b825a9 100644
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -14,6 +14,7 @@  CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its"
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
index b7be88c3a6..9dc5323013 100644
--- a/configs/stm32mp15_dhcor_basic_defconfig
+++ b/configs/stm32mp15_dhcor_basic_defconfig
@@ -14,6 +14,7 @@  CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its"
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3