From patchwork Tue Apr 7 11:12:35 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andre Przywara X-Patchwork-Id: 237316 List-Id: U-Boot discussion From: andre.przywara at arm.com (Andre Przywara) Date: Tue, 7 Apr 2020 12:12:35 +0100 Subject: [PATCH v2 6/7] arm: juno: enable USB In-Reply-To: <20200407111236.14930-1-andre.przywara@arm.com> References: <20200407111236.14930-1-andre.przywara@arm.com> Message-ID: <20200407111236.14930-7-andre.przywara@arm.com> The Juno board features a standard compliant EHCI/OHCI USB host controller pair, which we can just enable. The platform data is taken from the device tree. This allows to use USB mass storage (the only storage on a Juno r0) for loading. At least on my board USB seems a bit flaky, I need two "usb reset" sequences after the "usb start" to detect an USB hard drive. Signed-off-by: Andre Przywara Acked-by: Liviu Dudau Reviewed-by: Linus Walleij --- arch/arm/Kconfig | 4 ++++ configs/vexpress_aemv8a_juno_defconfig | 5 +++++ include/configs/vexpress_aemv8a.h | 5 +++++ 3 files changed, 14 insertions(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1e05eacc33..26698dbe6b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1136,6 +1136,10 @@ config TARGET_VEXPRESS64_JUNO select DM_SERIAL select ARM_PSCI_FW select PSCI_RESET + select DM + select BLK + select USB + select DM_USB config TARGET_LS2080A_EMU bool "Support ls2080a_emu" diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig index 6cb21e7a1b..ca7aa5ab02 100644 --- a/configs/vexpress_aemv8a_juno_defconfig +++ b/configs/vexpress_aemv8a_juno_defconfig @@ -27,6 +27,7 @@ CONFIG_CMD_ARMFLASH=y CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set CONFIG_CMD_UBI=y +CONFIG_CMD_USB=y # CONFIG_ISO_PARTITION is not set # CONFIG_EFI_PARTITION is not set CONFIG_ENV_IS_IN_FLASH=y @@ -41,3 +42,7 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_SMC911X=y CONFIG_SMC911X_BASE=0x018000000 CONFIG_SMC911X_32_BIT=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 403fde00de..2a4cf42584 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -209,6 +209,11 @@ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT #define CONFIG_SYS_MAX_FLASH_BANKS 1 +#ifdef CONFIG_USB_EHCI_HCD +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#endif + #define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ #define FLASH_MAX_SECTOR_SIZE 0x00040000