diff mbox series

[v3,15/19] ARM: dts: i.mxrt1050: add lcdif node

Message ID 20200408151025.20549-16-giulio.benetti@benettiengineering.com
State Superseded
Headers show
Series i.MXRT1050 add LCDIF support | expand

Commit Message

Giulio Benetti April 8, 2020, 3:10 p.m. UTC
Add lcdif node to SoC.

Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
---
 arch/arm/dts/imxrt1050.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Anatolij Gustschin April 17, 2020, 6:27 p.m. UTC | #1
On Wed,  8 Apr 2020 17:10:21 +0200
Giulio Benetti giulio.benetti at benettiengineering.com wrote:

> Add lcdif node to SoC.
> 
> Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>

Reviewed-by: Anatolij Gustschin <agust at denx.de>

--
Anatolij
Stefano Babic April 19, 2020, 9:09 a.m. UTC | #2
> Add lcdif node to SoC.
> Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
> Reviewed-by: Anatolij Gustschin <agust at denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/arch/arm/dts/imxrt1050.dtsi b/arch/arm/dts/imxrt1050.dtsi
index b1d98e6feb..0123f4788c 100644
--- a/arch/arm/dts/imxrt1050.dtsi
+++ b/arch/arm/dts/imxrt1050.dtsi
@@ -13,6 +13,7 @@ 
 
 / {
 	aliases {
+		display0 = &lcdif;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -142,5 +143,14 @@ 
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		lcdif: lcdif at 402b8000 {
+		    compatible = "fsl,imxrt-lcdif";
+		    reg = <0x402b8000 0x10000>;
+		    interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		    clocks = <&clks IMXRT1050_CLK_LCDIF>;
+		    clock-names = "per";
+		    status = "disabled";
+		};
 	};
 };