diff mbox series

[04/13] net: rtl8139: Consistently use rtl8139_rx_config

Message ID 20200412220359.28224-4-marek.vasut+renesas@gmail.com
State New
Headers show
Series [01/13] net: rtl8139: Register macro cleanup | expand

Commit Message

Marek Vasut April 12, 2020, 10:03 p.m. UTC 
This string of macros is exactly the same thing as rtl8139_rx_config,
so just use rtl8139_rx_config. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Joe Hershberger <joe.hershberger at ni.com>
---
 drivers/net/rtl8139.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c
index 90e9f1272c..7a2829a163 100644
--- a/drivers/net/rtl8139.c
+++ b/drivers/net/rtl8139.c
@@ -396,8 +396,8 @@  static void rtl_reset(struct eth_device *dev)
 	/* Must enable Tx/Rx before setting transfer thresholds! */
 	outb(RTL_REG_CHIPCMD_CMDRXENB | RTL_REG_CHIPCMD_CMDTXENB,
 		ioaddr + RTL_REG_CHIPCMD);
-	outl((RX_FIFO_THRESH<<13) | (RX_BUF_LEN_IDX<<11) | (RX_DMA_BURST<<8),
-		ioaddr + RTL_REG_RXCONFIG);		/* accept no frames yet!  */
+	/* accept no frames yet! */
+	outl(rtl8139_rx_config, ioaddr + RTL_REG_RXCONFIG);
 	outl((TX_DMA_BURST<<8)|0x03000000, ioaddr + RTL_REG_TXCONFIG);
 
 	/* The Linux driver changes RTL_REG_CONFIG1 here to use a different LED pattern