From patchwork Tue May 26 17:47:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 246612 List-Id: U-Boot discussion From: jagan at amarulasolutions.com (Jagan Teki) Date: Tue, 26 May 2020 23:17:16 +0530 Subject: [PATCH 13/14] spi: omap3: Drop nondm code In-Reply-To: <20200526174717.262151-1-jagan@amarulasolutions.com> References: <20200526174717.262151-1-jagan@amarulasolutions.com> Message-ID: <20200526174717.262151-4-jagan@amarulasolutions.com> Now all boards are using this omap3 spi driver in dm model, so drop the nondm code. Signed-off-by: Jagan Teki --- drivers/spi/Kconfig | 14 ++--- drivers/spi/omap3_spi.c | 136 ---------------------------------------- 2 files changed, 7 insertions(+), 143 deletions(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 09b9cb17d8..8fccfbf20d 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -226,6 +226,13 @@ config NXP_FSPI Enable the NXP FlexSPI (FSPI) driver. This driver can be used to access the SPI NOR flash on platforms embedding this NXP IP core. +config OMAP3_SPI + bool "McSPI driver for OMAP" + help + SPI master controller for OMAP24XX and later Multichannel SPI + (McSPI). This driver be used to access SPI chips on platforms + embedding this OMAP3 McSPI IP core. + config PIC32_SPI bool "Microchip PIC32 SPI driver" depends on MACH_PIC32 @@ -429,11 +436,4 @@ config MXC_SPI Enable the MXC SPI controller driver. This driver can be used on various i.MX SoCs such as i.MX31/35/51/6/7. -config OMAP3_SPI - bool "McSPI driver for OMAP" - help - SPI master controller for OMAP24XX and later Multichannel SPI - (McSPI). This driver be used to access SPI chips on platforms - embedding this OMAP3 McSPI IP core. - endif # menu "SPI Support" diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c index 6a615d1498..39e6813469 100644 --- a/drivers/spi/omap3_spi.c +++ b/drivers/spi/omap3_spi.c @@ -25,16 +25,6 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX) -#define OMAP3_MCSPI1_BASE 0x48030100 -#define OMAP3_MCSPI2_BASE 0x481A0100 -#else -#define OMAP3_MCSPI1_BASE 0x48098000 -#define OMAP3_MCSPI2_BASE 0x4809A000 -#define OMAP3_MCSPI3_BASE 0x480B8000 -#define OMAP3_MCSPI4_BASE 0x480BA000 -#endif - #define OMAP4_MCSPI_REG_OFFSET 0x100 struct omap2_mcspi_platform_config { @@ -109,9 +99,6 @@ struct mcspi { }; struct omap3_spi_priv { -#ifndef CONFIG_DM_SPI - struct spi_slave slave; -#endif struct mcspi *regs; unsigned int cs; unsigned int freq; @@ -455,128 +442,6 @@ static void _omap3_spi_claim_bus(struct omap3_spi_priv *priv) writel(conf, &priv->regs->modulctrl); } -#ifndef CONFIG_DM_SPI - -static inline struct omap3_spi_priv *to_omap3_spi(struct spi_slave *slave) -{ - return container_of(slave, struct omap3_spi_priv, slave); -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct omap3_spi_priv *priv = to_omap3_spi(slave); - - free(priv); -} - -int spi_claim_bus(struct spi_slave *slave) -{ - struct omap3_spi_priv *priv = to_omap3_spi(slave); - - spi_reset(priv->regs); - - _omap3_spi_claim_bus(priv); - _omap3_spi_set_wordlen(priv); - _omap3_spi_set_mode(priv); - _omap3_spi_set_speed(priv); - - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - struct omap3_spi_priv *priv = to_omap3_spi(slave); - - writel(OMAP3_MCSPI_MODULCTRL_MS, &priv->regs->modulctrl); -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct omap3_spi_priv *priv; - struct mcspi *regs; - - /* - * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules) - * with different number of chip selects (CS, channels): - * McSPI1 has 4 CS (bus 0, cs 0 - 3) - * McSPI2 has 2 CS (bus 1, cs 0 - 1) - * McSPI3 has 2 CS (bus 2, cs 0 - 1) - * McSPI4 has 1 CS (bus 3, cs 0) - */ - - switch (bus) { - case 0: - regs = (struct mcspi *)OMAP3_MCSPI1_BASE; - break; -#ifdef OMAP3_MCSPI2_BASE - case 1: - regs = (struct mcspi *)OMAP3_MCSPI2_BASE; - break; -#endif -#ifdef OMAP3_MCSPI3_BASE - case 2: - regs = (struct mcspi *)OMAP3_MCSPI3_BASE; - break; -#endif -#ifdef OMAP3_MCSPI4_BASE - case 3: - regs = (struct mcspi *)OMAP3_MCSPI4_BASE; - break; -#endif - default: - printf("SPI error: unsupported bus %i. Supported busses 0 - 3\n", bus); - return NULL; - } - - if (((bus == 0) && (cs > 3)) || - ((bus == 1) && (cs > 1)) || - ((bus == 2) && (cs > 1)) || - ((bus == 3) && (cs > 0))) { - printf("SPI error: unsupported chip select %i on bus %i\n", cs, bus); - return NULL; - } - - if (max_hz > OMAP3_MCSPI_MAX_FREQ) { - printf("SPI error: unsupported frequency %i Hz. Max frequency is 48 MHz\n", - max_hz); - return NULL; - } - - if (mode > SPI_MODE_3) { - printf("SPI error: unsupported SPI mode %i\n", mode); - return NULL; - } - - priv = spi_alloc_slave(struct omap3_spi_priv, bus, cs); - if (!priv) { - printf("SPI error: malloc of SPI structure failed\n"); - return NULL; - } - - priv->regs = regs; - priv->cs = cs; - priv->freq = max_hz; - priv->mode = mode; - priv->wordlen = priv->slave.wordlen; -#if 0 - /* Please migrate to DM_SPI support for this feature. */ - priv->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN; -#endif - - return &priv->slave; -} - -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) -{ - struct omap3_spi_priv *priv = to_omap3_spi(slave); - - return _spi_xfer(priv, bitlen, dout, din, flags); -} - -#else - static int omap3_spi_claim_bus(struct udevice *dev) { struct udevice *bus = dev->parent; @@ -701,4 +566,3 @@ U_BOOT_DRIVER(omap3_spi) = { .ops = &omap3_spi_ops, .priv_auto_alloc_size = sizeof(struct omap3_spi_priv), }; -#endif