From patchwork Tue Jun 16 23:06:07 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tom Rini X-Patchwork-Id: 242524 List-Id: U-Boot discussion From: trini at konsulko.com (Tom Rini) Date: Tue, 16 Jun 2020 19:06:07 -0400 Subject: [PATCHv2 07/31] Convert CONFIG_ATMEL_NAND_HW_PMECC et al to Kconfig In-Reply-To: <20200616230631.29189-1-trini@konsulko.com> References: <20200616230631.29189-1-trini@konsulko.com> Message-ID: <20200616230631.29189-7-trini@konsulko.com> This converts the following to Kconfig: CONFIG_ATMEL_NAND_HW_PMECC CONFIG_ATMEL_NAND_HWECC CONFIG_NAND_ATMEL CONFIG_PMECC_CAP CONFIG_PMECC_SECTOR_SIZE Signed-off-by: Tom Rini --- configs/sam9x60ek_nandflash_defconfig | 4 ++++ configs/sam9x60ek_qspiflash_defconfig | 4 ++++ include/configs/sam9x60ek.h | 7 ------- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig index b59e4be4be80..d09f78828fa8 100644 --- a/configs/sam9x60ek_nandflash_defconfig +++ b/configs/sam9x60ek_nandflash_defconfig @@ -50,6 +50,10 @@ CONFIG_MICROCHIP_FLEXCOM=y CONFIG_DM_MMC=y CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y +# CONFIG_SYS_NAND_USE_FLASH_BBT is not set +CONFIG_NAND_ATMEL=y +CONFIG_ATMEL_NAND_HW_PMECC=y +CONFIG_PMECC_CAP=8 CONFIG_PHY_MICREL=y CONFIG_DM_ETH=y CONFIG_MACB=y diff --git a/configs/sam9x60ek_qspiflash_defconfig b/configs/sam9x60ek_qspiflash_defconfig index 37de4044e9dc..6c4f534974e8 100644 --- a/configs/sam9x60ek_qspiflash_defconfig +++ b/configs/sam9x60ek_qspiflash_defconfig @@ -60,6 +60,10 @@ CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_RAW_NAND=y +# CONFIG_SYS_NAND_USE_FLASH_BBT is not set +CONFIG_NAND_ATMEL=y +CONFIG_ATMEL_NAND_HW_PMECC=y +CONFIG_PMECC_CAP=8 CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h index 9b439a644161..19714402ca45 100644 --- a/include/configs/sam9x60ek.h +++ b/include/configs/sam9x60ek.h @@ -44,7 +44,6 @@ /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_MASK_ALE BIT(21) @@ -54,12 +53,6 @@ #define CONFIG_SYS_NAND_ONFI_DETECTION #endif -/* PMECC & PMERRLOC */ -#define CONFIG_ATMEL_NAND_HWECC -#define CONFIG_ATMEL_NAND_HW_PMECC -#define CONFIG_PMECC_CAP 8 -#define CONFIG_PMECC_SECTOR_SIZE 512 - #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ #ifdef CONFIG_SD_BOOT