@@ -25,17 +25,16 @@ static inline const struct clk_ops *clk_dev_ops(struct udevice *dev)
#if CONFIG_IS_ENABLED(OF_CONTROL)
# if CONFIG_IS_ENABLED(OF_PLATDATA)
-int clk_get_by_index_platdata(struct udevice *dev, int index,
- struct phandle_1_arg *cells, struct clk *clk)
+int clk_get_by_driver_info(struct udevice *dev, struct phandle_1_arg *cells,
+ struct clk *clk)
{
int ret;
- if (index != 0)
- return -ENOSYS;
- ret = uclass_get_device(UCLASS_CLK, 0, &clk->dev);
+ ret = device_get_by_driver_info((struct driver_info *)cells->node,
+ &clk->dev);
if (ret)
return ret;
- clk->id = cells[0].arg[0];
+ clk->id = cells->arg[0];
return 0;
}
@@ -63,17 +63,15 @@ int irq_read_and_clear(struct irq *irq)
}
#if CONFIG_IS_ENABLED(OF_PLATDATA)
-int irq_get_by_index_platdata(struct udevice *dev, int index,
- struct phandle_1_arg *cells, struct irq *irq)
+int irq_get_by_driver_info(struct udevice *dev,
+ struct phandle_1_arg *cells, struct irq *irq)
{
int ret;
- if (index != 0)
- return -ENOSYS;
- ret = uclass_get_device(UCLASS_IRQ, 0, &irq->dev);
+ ret = device_get_by_driver_info(cells->node, &irq->dev);
if (ret)
return ret;
- irq->id = cells[0].arg[0];
+ irq->id = cells->arg[0];
return 0;
}
@@ -437,7 +437,7 @@ static int ftsdc010_mmc_probe(struct udevice *dev)
chip->priv = dev;
chip->dev_index = 1;
memcpy(priv->minmax, dtplat->clock_freq_min_max, sizeof(priv->minmax));
- ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->clk);
+ ret = clk_get_by_driver_info(dev, dtplat->clocks, &priv->clk);
if (ret < 0)
return ret;
#endif
@@ -120,7 +120,7 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
priv->minmax[0] = 400000; /* 400 kHz */
priv->minmax[1] = dtplat->max_frequency;
- ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->clk);
+ ret = clk_get_by_driver_info(dev, dtplat->clocks, &priv->clk);
if (ret < 0)
return ret;
#else
@@ -46,7 +46,7 @@ static int arasan_sdhci_probe(struct udevice *dev)
host->name = dev->name;
host->ioaddr = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
max_frequency = dtplat->max_frequency;
- ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &clk);
+ ret = clk_get_by_driver_info(dev, dtplat->clocks, &clk);
#else
max_frequency = dev_read_u32_default(dev, "max-frequency", 0);
ret = clk_get_by_index(dev, 0, &clk);
@@ -3125,7 +3125,7 @@ static int rk3399_dmc_init(struct udevice *dev)
priv->cic, priv->pmugrf, priv->pmusgrf, priv->pmucru, priv->pmu);
#if CONFIG_IS_ENABLED(OF_PLATDATA)
- ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->ddr_clk);
+ ret = clk_get_by_driver_info(dev, dtplat->clocks, &priv->ddr_clk);
#else
ret = clk_get_by_index(dev, 0, &priv->ddr_clk);
#endif
@@ -181,7 +181,7 @@ static int conv_of_platdata(struct udevice *dev)
plat->base = dtplat->reg[0];
plat->frequency = 20000000;
- ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->clk);
+ ret = clk_get_by_driver_info(dev, dtplat->clocks, &priv->clk);
if (ret < 0)
return ret;
dev->req_seq = 0;
@@ -89,8 +89,8 @@ struct clk_bulk {
#if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(CLK)
struct phandle_1_arg;
-int clk_get_by_index_platdata(struct udevice *dev, int index,
- struct phandle_1_arg *cells, struct clk *clk);
+int clk_get_by_driver_info(struct udevice *dev,
+ struct phandle_1_arg *cells, struct clk *clk);
/**
* clk_get_by_index - Get/request a clock by integer index.
@@ -151,6 +151,7 @@ class DtbPlatdata(object):
key: Driver alias declared with
U_BOOT_DRIVER_ALIAS(driver_alias, driver_name)
value: Driver name declared with U_BOOT_DRIVER(driver_name)
+ _links: List of links to be included in dm_populate_phandle_data()
"""
def __init__(self, dtb_fname, include_disabled, warning_disabled):
self._fdt = None
@@ -163,6 +164,7 @@ class DtbPlatdata(object):
self._aliases = {}
self._drivers = []
self._driver_aliases = {}
+ self._links = []
def get_normalized_compat_name(self, node):
"""Get a node's normalized compat name
@@ -551,7 +553,7 @@ class DtbPlatdata(object):
"""
struct_name, _ = self.get_normalized_compat_name(node)
var_name = conv_name_to_c(node.name)
- self.buf('static const struct %s%s %s%s = {\n' %
+ self.buf('static struct %s%s %s%s = {\n' %
(STRUCT_PREFIX, struct_name, VAL_PREFIX, var_name))
for pname in sorted(node.props):
prop = node.props[pname]
@@ -570,6 +572,7 @@ class DtbPlatdata(object):
if info:
# Process the list as pairs of (phandle, id)
pos = 0
+ item = 0
for args in info.args:
phandle_cell = prop.value[pos]
phandle = fdt_util.fdt32_to_cpu(phandle_cell)
@@ -579,8 +582,16 @@ class DtbPlatdata(object):
for i in range(args):
arg_values.append(str(fdt_util.fdt32_to_cpu(prop.value[pos + 1 + i])))
pos += 1 + args
- vals.append('\t{&%s%s, {%s}}' % (VAL_PREFIX, name,
- ', '.join(arg_values)))
+ # node member is filled with NULL as the real value
+ # will be update at run-time during dm_init_and_scan()
+ # by dm_populate_phandle_data()
+ vals.append('\t{NULL, {%s}}' % (', '.join(arg_values)))
+ var_node = '%s%s.%s[%d].node' % \
+ (VAL_PREFIX, var_name, member_name, item)
+ # Save the the link information to be use to define
+ # dm_populate_phandle_data()
+ self._links.append({'var_node': var_node, 'dev_name': name})
+ item += 1
for val in vals:
self.buf('\n\t\t%s,' % val)
else:
@@ -636,6 +647,15 @@ class DtbPlatdata(object):
self.output_node(node)
nodes_to_output.remove(node)
+ # Define dm_populate_phandle_data() which will add the linking between
+ # nodes using DM_GET_DEVICE
+ # dtv_dmc_at_xxx.clocks[0].node = DM_GET_DEVICE(clock_controller_at_xxx)
+ self.buf('void dm_populate_phandle_data(void) {\n')
+ for l in self._links:
+ self.buf('\t%s = DM_GET_DEVICE(%s);\n' % (l['var_node'], l['dev_name']))
+ self.buf('}\n')
+
+ self.out(''.join(self.get_buf()))
def run_steps(args, dtb_file, include_disabled, output, warning_disabled=False):
"""Run all the steps of the dtoc tool
@@ -48,6 +48,9 @@ C_HEADER = '''/*
#include <dt-structs.h>
'''
+C_EMPTY_POPULATE_PHANDLE_DATA = '''void dm_populate_phandle_data(void) {
+}
+'''
def get_dtb_file(dts_fname, capture_stderr=False):
@@ -167,7 +170,8 @@ class TestDtoc(unittest.TestCase):
self.run_test(['platdata'], dtb_file, output)
with open(output) as infile:
lines = infile.read().splitlines()
- self.assertEqual(C_HEADER.splitlines() + [''], lines)
+ self.assertEqual(C_HEADER.splitlines() + [''] +
+ C_EMPTY_POPULATE_PHANDLE_DATA.splitlines(), lines)
def test_simple(self):
"""Test output from some simple nodes with various types of data"""
@@ -202,7 +206,7 @@ struct dtd_sandbox_spl_test_2 {
with open(output) as infile:
data = infile.read()
self._CheckStrings(C_HEADER + '''
-static const struct dtd_sandbox_spl_test dtv_spl_test = {
+static struct dtd_sandbox_spl_test dtv_spl_test = {
\t.boolval\t\t= true,
\t.bytearray\t\t= {0x6, 0x0, 0x0},
\t.byteval\t\t= 0x5,
@@ -220,7 +224,7 @@ U_BOOT_DEVICE(spl_test) = {
\t.platdata_size\t= sizeof(dtv_spl_test),
};
-static const struct dtd_sandbox_spl_test dtv_spl_test2 = {
+static struct dtd_sandbox_spl_test dtv_spl_test2 = {
\t.bytearray\t\t= {0x1, 0x23, 0x34},
\t.byteval\t\t= 0x8,
\t.intarray\t\t= {0x5, 0x0, 0x0, 0x0},
@@ -236,7 +240,7 @@ U_BOOT_DEVICE(spl_test2) = {
\t.platdata_size\t= sizeof(dtv_spl_test2),
};
-static const struct dtd_sandbox_spl_test dtv_spl_test3 = {
+static struct dtd_sandbox_spl_test dtv_spl_test3 = {
\t.stringarray\t\t= {"one", "", ""},
};
U_BOOT_DEVICE(spl_test3) = {
@@ -245,7 +249,7 @@ U_BOOT_DEVICE(spl_test3) = {
\t.platdata_size\t= sizeof(dtv_spl_test3),
};
-static const struct dtd_sandbox_spl_test_2 dtv_spl_test4 = {
+static struct dtd_sandbox_spl_test_2 dtv_spl_test4 = {
};
U_BOOT_DEVICE(spl_test4) = {
\t.name\t\t= "sandbox_spl_test_2",
@@ -253,7 +257,7 @@ U_BOOT_DEVICE(spl_test4) = {
\t.platdata_size\t= sizeof(dtv_spl_test4),
};
-static const struct dtd_sandbox_i2c_test dtv_i2c_at_0 = {
+static struct dtd_sandbox_i2c_test dtv_i2c_at_0 = {
};
U_BOOT_DEVICE(i2c_at_0) = {
\t.name\t\t= "sandbox_i2c_test",
@@ -261,7 +265,7 @@ U_BOOT_DEVICE(i2c_at_0) = {
\t.platdata_size\t= sizeof(dtv_i2c_at_0),
};
-static const struct dtd_sandbox_pmic_test dtv_pmic_at_9 = {
+static struct dtd_sandbox_pmic_test dtv_pmic_at_9 = {
\t.low_power\t\t= true,
\t.reg\t\t\t= {0x9, 0x0},
};
@@ -271,7 +275,7 @@ U_BOOT_DEVICE(pmic_at_9) = {
\t.platdata_size\t= sizeof(dtv_pmic_at_9),
};
-''', data)
+''' + C_EMPTY_POPULATE_PHANDLE_DATA, data)
def test_driver_alias(self):
"""Test output from a device tree file with a driver alias"""
@@ -293,7 +297,7 @@ struct dtd_sandbox_gpio {
with open(output) as infile:
data = infile.read()
self._CheckStrings(C_HEADER + '''
-static const struct dtd_sandbox_gpio dtv_gpios_at_0 = {
+static struct dtd_sandbox_gpio dtv_gpios_at_0 = {
\t.gpio_bank_name\t\t= "a",
\t.gpio_controller\t= true,
\t.sandbox_gpio_count\t= 0x14,
@@ -304,6 +308,8 @@ U_BOOT_DEVICE(gpios_at_0) = {
\t.platdata_size\t= sizeof(dtv_gpios_at_0),
};
+void dm_populate_phandle_data(void) {
+}
''', data)
def test_invalid_driver(self):
@@ -324,7 +330,7 @@ struct dtd_invalid {
with open(output) as infile:
data = infile.read()
self._CheckStrings(C_HEADER + '''
-static const struct dtd_invalid dtv_spl_test = {
+static struct dtd_invalid dtv_spl_test = {
};
U_BOOT_DEVICE(spl_test) = {
\t.name\t\t= "invalid",
@@ -332,6 +338,8 @@ U_BOOT_DEVICE(spl_test) = {
\t.platdata_size\t= sizeof(dtv_spl_test),
};
+void dm_populate_phandle_data(void) {
+}
''', data)
def test_phandle(self):
@@ -354,7 +362,7 @@ struct dtd_target {
with open(output) as infile:
data = infile.read()
self._CheckStrings(C_HEADER + '''
-static const struct dtd_target dtv_phandle_target = {
+static struct dtd_target dtv_phandle_target = {
\t.intval\t\t\t= 0x0,
};
U_BOOT_DEVICE(phandle_target) = {
@@ -363,7 +371,7 @@ U_BOOT_DEVICE(phandle_target) = {
\t.platdata_size\t= sizeof(dtv_phandle_target),
};
-static const struct dtd_target dtv_phandle2_target = {
+static struct dtd_target dtv_phandle2_target = {
\t.intval\t\t\t= 0x1,
};
U_BOOT_DEVICE(phandle2_target) = {
@@ -372,7 +380,7 @@ U_BOOT_DEVICE(phandle2_target) = {
\t.platdata_size\t= sizeof(dtv_phandle2_target),
};
-static const struct dtd_target dtv_phandle3_target = {
+static struct dtd_target dtv_phandle3_target = {
\t.intval\t\t\t= 0x2,
};
U_BOOT_DEVICE(phandle3_target) = {
@@ -381,12 +389,12 @@ U_BOOT_DEVICE(phandle3_target) = {
\t.platdata_size\t= sizeof(dtv_phandle3_target),
};
-static const struct dtd_source dtv_phandle_source = {
+static struct dtd_source dtv_phandle_source = {
\t.clocks\t\t\t= {
-\t\t\t{&dtv_phandle_target, {}},
-\t\t\t{&dtv_phandle2_target, {11}},
-\t\t\t{&dtv_phandle3_target, {12, 13}},
-\t\t\t{&dtv_phandle_target, {}},},
+\t\t\t{NULL, {}},
+\t\t\t{NULL, {11}},
+\t\t\t{NULL, {12, 13}},
+\t\t\t{NULL, {}},},
};
U_BOOT_DEVICE(phandle_source) = {
\t.name\t\t= "source",
@@ -394,9 +402,9 @@ U_BOOT_DEVICE(phandle_source) = {
\t.platdata_size\t= sizeof(dtv_phandle_source),
};
-static const struct dtd_source dtv_phandle_source2 = {
+static struct dtd_source dtv_phandle_source2 = {
\t.clocks\t\t\t= {
-\t\t\t{&dtv_phandle_target, {}},},
+\t\t\t{NULL, {}},},
};
U_BOOT_DEVICE(phandle_source2) = {
\t.name\t\t= "source",
@@ -404,6 +412,13 @@ U_BOOT_DEVICE(phandle_source2) = {
\t.platdata_size\t= sizeof(dtv_phandle_source2),
};
+void dm_populate_phandle_data(void) {
+\tdtv_phandle_source.clocks[0].node = DM_GET_DEVICE(phandle_target);
+\tdtv_phandle_source.clocks[1].node = DM_GET_DEVICE(phandle2_target);
+\tdtv_phandle_source.clocks[2].node = DM_GET_DEVICE(phandle3_target);
+\tdtv_phandle_source.clocks[3].node = DM_GET_DEVICE(phandle_target);
+\tdtv_phandle_source2.clocks[0].node = DM_GET_DEVICE(phandle_target);
+}
''', data)
def test_phandle_single(self):
@@ -430,7 +445,7 @@ struct dtd_target {
with open(output) as infile:
data = infile.read()
self._CheckStrings(C_HEADER + '''
-static const struct dtd_target dtv_phandle_target = {
+static struct dtd_target dtv_phandle_target = {
};
U_BOOT_DEVICE(phandle_target) = {
\t.name\t\t= "target",
@@ -438,9 +453,9 @@ U_BOOT_DEVICE(phandle_target) = {
\t.platdata_size\t= sizeof(dtv_phandle_target),
};
-static const struct dtd_source dtv_phandle_source2 = {
+static struct dtd_source dtv_phandle_source2 = {
\t.clocks\t\t\t= {
-\t\t\t{&dtv_phandle_target, {}},},
+\t\t\t{NULL, {}},},
};
U_BOOT_DEVICE(phandle_source2) = {
\t.name\t\t= "source",
@@ -448,6 +463,9 @@ U_BOOT_DEVICE(phandle_source2) = {
\t.platdata_size\t= sizeof(dtv_phandle_source2),
};
+void dm_populate_phandle_data(void) {
+\tdtv_phandle_source2.clocks[0].node = DM_GET_DEVICE(phandle_target);
+}
''', data)
def test_phandle_bad(self):
@@ -489,7 +507,7 @@ struct dtd_compat1 {
with open(output) as infile:
data = infile.read()
self._CheckStrings(C_HEADER + '''
-static const struct dtd_compat1 dtv_spl_test = {
+static struct dtd_compat1 dtv_spl_test = {
\t.intval\t\t\t= 0x1,
};
U_BOOT_DEVICE(spl_test) = {
@@ -498,7 +516,7 @@ U_BOOT_DEVICE(spl_test) = {
\t.platdata_size\t= sizeof(dtv_spl_test),
};
-''', data)
+''' + C_EMPTY_POPULATE_PHANDLE_DATA, data)
def test_addresses64(self):
"""Test output from a node with a 'reg' property with na=2, ns=2"""
@@ -523,7 +541,7 @@ struct dtd_test3 {
with open(output) as infile:
data = infile.read()
self._CheckStrings(C_HEADER + '''
-static const struct dtd_test1 dtv_test1 = {
+static struct dtd_test1 dtv_test1 = {
\t.reg\t\t\t= {0x1234, 0x5678},
};
U_BOOT_DEVICE(test1) = {
@@ -532,7 +550,7 @@ U_BOOT_DEVICE(test1) = {
\t.platdata_size\t= sizeof(dtv_test1),
};
-static const struct dtd_test2 dtv_test2 = {
+static struct dtd_test2 dtv_test2 = {
\t.reg\t\t\t= {0x1234567890123456, 0x9876543210987654},
};
U_BOOT_DEVICE(test2) = {
@@ -541,7 +559,7 @@ U_BOOT_DEVICE(test2) = {
\t.platdata_size\t= sizeof(dtv_test2),
};
-static const struct dtd_test3 dtv_test3 = {
+static struct dtd_test3 dtv_test3 = {
\t.reg\t\t\t= {0x1234567890123456, 0x9876543210987654, 0x2, 0x3},
};
U_BOOT_DEVICE(test3) = {
@@ -550,7 +568,7 @@ U_BOOT_DEVICE(test3) = {
\t.platdata_size\t= sizeof(dtv_test3),
};
-''', data)
+''' + C_EMPTY_POPULATE_PHANDLE_DATA, data)
def test_addresses32(self):
"""Test output from a node with a 'reg' property with na=1, ns=1"""
@@ -572,7 +590,7 @@ struct dtd_test2 {
with open(output) as infile:
data = infile.read()
self._CheckStrings(C_HEADER + '''
-static const struct dtd_test1 dtv_test1 = {
+static struct dtd_test1 dtv_test1 = {
\t.reg\t\t\t= {0x1234, 0x5678},
};
U_BOOT_DEVICE(test1) = {
@@ -581,7 +599,7 @@ U_BOOT_DEVICE(test1) = {
\t.platdata_size\t= sizeof(dtv_test1),
};
-static const struct dtd_test2 dtv_test2 = {
+static struct dtd_test2 dtv_test2 = {
\t.reg\t\t\t= {0x12345678, 0x98765432, 0x2, 0x3},
};
U_BOOT_DEVICE(test2) = {
@@ -590,7 +608,7 @@ U_BOOT_DEVICE(test2) = {
\t.platdata_size\t= sizeof(dtv_test2),
};
-''', data)
+''' + C_EMPTY_POPULATE_PHANDLE_DATA, data)
def test_addresses64_32(self):
"""Test output from a node with a 'reg' property with na=2, ns=1"""
@@ -615,7 +633,7 @@ struct dtd_test3 {
with open(output) as infile:
data = infile.read()
self._CheckStrings(C_HEADER + '''
-static const struct dtd_test1 dtv_test1 = {
+static struct dtd_test1 dtv_test1 = {
\t.reg\t\t\t= {0x123400000000, 0x5678},
};
U_BOOT_DEVICE(test1) = {
@@ -624,7 +642,7 @@ U_BOOT_DEVICE(test1) = {
\t.platdata_size\t= sizeof(dtv_test1),
};
-static const struct dtd_test2 dtv_test2 = {
+static struct dtd_test2 dtv_test2 = {
\t.reg\t\t\t= {0x1234567890123456, 0x98765432},
};
U_BOOT_DEVICE(test2) = {
@@ -633,7 +651,7 @@ U_BOOT_DEVICE(test2) = {
\t.platdata_size\t= sizeof(dtv_test2),
};
-static const struct dtd_test3 dtv_test3 = {
+static struct dtd_test3 dtv_test3 = {
\t.reg\t\t\t= {0x1234567890123456, 0x98765432, 0x2, 0x3},
};
U_BOOT_DEVICE(test3) = {
@@ -642,7 +660,7 @@ U_BOOT_DEVICE(test3) = {
\t.platdata_size\t= sizeof(dtv_test3),
};
-''', data)
+''' + C_EMPTY_POPULATE_PHANDLE_DATA, data)
def test_addresses32_64(self):
"""Test output from a node with a 'reg' property with na=1, ns=2"""
@@ -667,7 +685,7 @@ struct dtd_test3 {
with open(output) as infile:
data = infile.read()
self._CheckStrings(C_HEADER + '''
-static const struct dtd_test1 dtv_test1 = {
+static struct dtd_test1 dtv_test1 = {
\t.reg\t\t\t= {0x1234, 0x567800000000},
};
U_BOOT_DEVICE(test1) = {
@@ -676,7 +694,7 @@ U_BOOT_DEVICE(test1) = {
\t.platdata_size\t= sizeof(dtv_test1),
};
-static const struct dtd_test2 dtv_test2 = {
+static struct dtd_test2 dtv_test2 = {
\t.reg\t\t\t= {0x12345678, 0x9876543210987654},
};
U_BOOT_DEVICE(test2) = {
@@ -685,7 +703,7 @@ U_BOOT_DEVICE(test2) = {
\t.platdata_size\t= sizeof(dtv_test2),
};
-static const struct dtd_test3 dtv_test3 = {
+static struct dtd_test3 dtv_test3 = {
\t.reg\t\t\t= {0x12345678, 0x9876543210987654, 0x2, 0x3},
};
U_BOOT_DEVICE(test3) = {
@@ -694,7 +712,7 @@ U_BOOT_DEVICE(test3) = {
\t.platdata_size\t= sizeof(dtv_test3),
};
-''', data)
+''' + C_EMPTY_POPULATE_PHANDLE_DATA, data)
def test_bad_reg(self):
"""Test that a reg property with an invalid type generates an error"""
@@ -734,7 +752,7 @@ struct dtd_sandbox_spl_test {
with open(output) as infile:
data = infile.read()
self._CheckStrings(C_HEADER + '''
-static const struct dtd_sandbox_spl_test dtv_spl_test = {
+static struct dtd_sandbox_spl_test dtv_spl_test = {
\t.intval\t\t\t= 0x1,
};
U_BOOT_DEVICE(spl_test) = {
@@ -743,7 +761,7 @@ U_BOOT_DEVICE(spl_test) = {
\t.platdata_size\t= sizeof(dtv_spl_test),
};
-static const struct dtd_sandbox_spl_test dtv_spl_test2 = {
+static struct dtd_sandbox_spl_test dtv_spl_test2 = {
\t.intarray\t\t= 0x5,
};
U_BOOT_DEVICE(spl_test2) = {
@@ -752,7 +770,7 @@ U_BOOT_DEVICE(spl_test2) = {
\t.platdata_size\t= sizeof(dtv_spl_test2),
};
-''', data)
+''' + C_EMPTY_POPULATE_PHANDLE_DATA, data)
def testStdout(self):
"""Test output to stdout"""
In the current implementation, when dtoc parses a dtb to generate a struct platdata it converts the information related to linked nodes as pointers to struct platdata of destination nodes. By doing this, it makes difficult to get pointer to udevices created based on these information. This patch extends dtoc to use struct driver_info when populating information about linked nodes, which makes it easier to later get the devices created. In this context, reimplement functions like clk_get_by_index_platdata() which made use of the previous approach. Signed-off-by: Walter Lozano <walter.lozano at collabora.com> --- drivers/clk/clk-uclass.c | 11 ++- drivers/misc/irq-uclass.c | 10 ++- drivers/mmc/ftsdc010_mci.c | 2 +- drivers/mmc/rockchip_dw_mmc.c | 2 +- drivers/mmc/rockchip_sdhci.c | 2 +- drivers/ram/rockchip/sdram_rk3399.c | 2 +- drivers/spi/rk_spi.c | 2 +- include/clk.h | 4 +- tools/dtoc/dtb_platdata.py | 26 ++++++- tools/dtoc/test_dtoc.py | 104 ++++++++++++++++------------ 10 files changed, 100 insertions(+), 65 deletions(-)