| Message ID | 20200706200120.23093-4-rasmus.villemoes@prevas.dk |
|---|---|
| State | Superseded |
| Headers | show |
| Series | new rtc methods, rtc command, and tests | expand |
Hello Rasmus, Am 06.07.2020 um 22:01 schrieb Rasmus Villemoes: > Similar to how the dm_rtc_{read,write} functions fall back to using > the {read,write}8 methods, do the opposite in the rtc_{read,write}8 > functions. > > This way, each driver only needs to provide either ->read8 or ->read > to make both rtc_read8() and dm_rtc_read() work - without this, a > driver that provides ->read() would most likely just duplicate the > logic here for implementing a ->read8() method in term of its ->read() > method. The same remarks of course apply to the write case. > > Reviewed-by: Simon Glass <sjg at chromium.org> > Reviewed-by: Heiko Schocher <hs at denx.de> > Signed-off-by: Rasmus Villemoes <rasmus.villemoes at prevas.dk> > --- > drivers/rtc/rtc-uclass.c | 25 +++++++++++++++++++------ > 1 file changed, 19 insertions(+), 6 deletions(-) Applied to u-boot-i2c.git master Thanks! bye, Heiko
diff --git a/drivers/rtc/rtc-uclass.c b/drivers/rtc/rtc-uclass.c index 44da500c03..8035f7fe9c 100644 --- a/drivers/rtc/rtc-uclass.c +++ b/drivers/rtc/rtc-uclass.c @@ -83,9 +83,17 @@ int rtc_read8(struct udevice *dev, unsigned int reg) struct rtc_ops *ops = rtc_get_ops(dev); assert(ops); - if (!ops->read8) - return -ENOSYS; - return ops->read8(dev, reg); + if (ops->read8) + return ops->read8(dev, reg); + if (ops->read) { + u8 buf[1]; + int ret = ops->read(dev, reg, buf, 1); + + if (ret < 0) + return ret; + return buf[0]; + } + return -ENOSYS; } int rtc_write8(struct udevice *dev, unsigned int reg, int val) @@ -93,9 +101,14 @@ int rtc_write8(struct udevice *dev, unsigned int reg, int val) struct rtc_ops *ops = rtc_get_ops(dev); assert(ops); - if (!ops->write8) - return -ENOSYS; - return ops->write8(dev, reg, val); + if (ops->write8) + return ops->write8(dev, reg, val); + if (ops->write) { + u8 buf[1] = { val }; + + return ops->write(dev, reg, buf, 1); + } + return -ENOSYS; } int rtc_read16(struct udevice *dev, unsigned int reg, u16 *valuep)
Similar to how the dm_rtc_{read,write} functions fall back to using the {read,write}8 methods, do the opposite in the rtc_{read,write}8 functions. This way, each driver only needs to provide either ->read8 or ->read to make both rtc_read8() and dm_rtc_read() work - without this, a driver that provides ->read() would most likely just duplicate the logic here for implementing a ->read8() method in term of its ->read() method. The same remarks of course apply to the write case. Reviewed-by: Simon Glass <sjg at chromium.org> Reviewed-by: Heiko Schocher <hs at denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes at prevas.dk> --- drivers/rtc/rtc-uclass.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-)