diff mbox series

[1/6,v2] efi_selftest: Remove loadfile2 for initrd selftests

Message ID 20210313214738.3257922-2-ilias.apalodimas@linaro.org
State Superseded
Headers show
Series Loadfile2 for initrd loading | expand

Commit Message

Ilias Apalodimas March 13, 2021, 9:47 p.m. UTC 
We are redefining how u-boot locates the initrd to load via the kernel
LoadFile2 protocol.  This selftest is not relevant any more, so remove
it. A new one will be added later

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

---
 lib/efi_selftest/Makefile                   |   1 -
 lib/efi_selftest/efi_selftest_load_initrd.c | 221 --------------------
 2 files changed, 222 deletions(-)
 delete mode 100644 lib/efi_selftest/efi_selftest_load_initrd.c

-- 
2.30.1
diff mbox series

Patch

diff --git a/lib/efi_selftest/Makefile b/lib/efi_selftest/Makefile
index b02fd56e0a79..50de581b7763 100644
--- a/lib/efi_selftest/Makefile
+++ b/lib/efi_selftest/Makefile
@@ -61,7 +61,6 @@  obj-$(CONFIG_CPU_V7) += efi_selftest_unaligned.o
 obj-$(CONFIG_EFI_LOADER_HII) += efi_selftest_hii.o
 obj-$(CONFIG_EFI_RNG_PROTOCOL) += efi_selftest_rng.o
 obj-$(CONFIG_EFI_GET_TIME) += efi_selftest_rtc.o
-obj-$(CONFIG_EFI_LOAD_FILE2_INITRD) += efi_selftest_load_initrd.o
 obj-$(CONFIG_EFI_TCG2_PROTOCOL) += efi_selftest_tcg2.o
 
 ifeq ($(CONFIG_GENERATE_ACPI_TABLE),)
diff --git a/lib/efi_selftest/efi_selftest_load_initrd.c b/lib/efi_selftest/efi_selftest_load_initrd.c
deleted file mode 100644
index f591dcd2115e..000000000000
--- a/lib/efi_selftest/efi_selftest_load_initrd.c
+++ /dev/null
@@ -1,221 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * efi_selftest_load_initrd
- *
- * Copyright (c) 2020 Ilias Apalodimas <ilias.apalodimas@linaro.org>
- *
- * This test checks the FileLoad2 protocol.
- * A known file is read from the file system and verified.
- *
- * An example usage - given a file image with a file system in partition 1
- * holding file initrd - is:
- *
- * * Configure the sandbox with
- *
- *   CONFIG_EFI_SELFTEST=y
- *   CONFIG_EFI_LOAD_FILE2_INITRD=y
- *   CONFIG_EFI_INITRD_FILESPEC="host 0:1 initrd"
- *
- * * Run ./u-boot and execute
- *
- *   host bind 0 image
- *   setenv efi_selftest load initrd
- *   bootefi selftest
- *
- * This would provide a test output like:
- *
- *   Testing EFI API implementation
- *
- *   Selected test: 'load initrd'
- *
- *   Setting up 'load initrd'
- *   Setting up 'load initrd' succeeded
- *
- *   Executing 'load initrd'
- *   Loaded 12378613 bytes
- *   CRC32 2997478465
- *
- * Now the size and CRC32 can be compared to the provided file.
- */
-
-#include <efi_selftest.h>
-#include <efi_loader.h>
-#include <efi_load_initrd.h>
-
-static struct efi_boot_services *boottime;
-
-static struct efi_initrd_dp dp = {
-	.vendor = {
-		{
-		   DEVICE_PATH_TYPE_MEDIA_DEVICE,
-		   DEVICE_PATH_SUB_TYPE_VENDOR_PATH,
-		   sizeof(dp.vendor),
-		},
-		EFI_INITRD_MEDIA_GUID,
-	},
-	.end = {
-		DEVICE_PATH_TYPE_END,
-		DEVICE_PATH_SUB_TYPE_END,
-		sizeof(dp.end),
-	}
-};
-
-static struct efi_initrd_dp dp_invalid = {
-	.vendor = {
-		{
-		   DEVICE_PATH_TYPE_MEDIA_DEVICE,
-		   DEVICE_PATH_SUB_TYPE_VENDOR_PATH,
-		   sizeof(dp.vendor),
-		},
-		EFI_INITRD_MEDIA_GUID,
-	},
-	.end = {
-		0x8f, /* invalid */
-		0xfe, /* invalid */
-		sizeof(dp.end),
-	}
-};
-
-static int setup(const efi_handle_t handle,
-		 const struct efi_system_table *systable)
-{
-	boottime = systable->boottime;
-
-	return EFI_ST_SUCCESS;
-}
-
-static int execute(void)
-{
-	struct efi_load_file_protocol *lf2;
-	struct efi_device_path *dp2, *dp2_invalid;
-	efi_status_t status;
-	efi_handle_t handle;
-	char buffer[64];
-	efi_uintn_t buffer_size;
-	void *buf;
-	u32 crc32;
-
-	memset(buffer, 0, sizeof(buffer));
-
-	dp2 = (struct efi_device_path *)&dp;
-	status = boottime->locate_device_path(&efi_guid_load_file2_protocol,
-					      &dp2, &handle);
-	if (status != EFI_SUCCESS) {
-		efi_st_error("Unable to locate device path\n");
-		return EFI_ST_FAILURE;
-	}
-
-	status = boottime->handle_protocol(handle,
-					   &efi_guid_load_file2_protocol,
-					   (void **)&lf2);
-	if (status != EFI_SUCCESS) {
-		efi_st_error("Unable to locate protocol\n");
-		return EFI_ST_FAILURE;
-	}
-
-	/* Case 1:
-	 * buffer_size can't be NULL
-	 * protocol can't be NULL
-	 */
-	status = lf2->load_file(lf2, dp2, false, NULL, &buffer);
-	if (status != EFI_INVALID_PARAMETER) {
-		efi_st_error("Buffer size can't be NULL\n");
-		return EFI_ST_FAILURE;
-	}
-	buffer_size = sizeof(buffer);
-	status = lf2->load_file(NULL, dp2, false, &buffer_size, &buffer);
-	if (status != EFI_INVALID_PARAMETER) {
-		efi_st_error("Protocol can't be NULL\n");
-		return EFI_ST_FAILURE;
-	}
-
-	/*
-	 * Case 2: Match end node type/sub-type on device path
-	 */
-	dp2_invalid = (struct efi_device_path *)&dp_invalid;
-	buffer_size = sizeof(buffer);
-	status = lf2->load_file(lf2, dp2_invalid, false, &buffer_size, &buffer);
-	if (status != EFI_INVALID_PARAMETER) {
-		efi_st_error("Invalid device path type must return EFI_INVALID_PARAMETER\n");
-		return EFI_ST_FAILURE;
-	}
-
-	status = lf2->load_file(lf2, dp2_invalid, false, &buffer_size, &buffer);
-	if (status != EFI_INVALID_PARAMETER) {
-		efi_st_error("Invalid device path sub-type must return EFI_INVALID_PARAMETER\n");
-		return EFI_ST_FAILURE;
-	}
-
-	/*
-	 * Case 3:
-	 * BootPolicy 'true' must return EFI_UNSUPPORTED
-	 */
-	buffer_size = sizeof(buffer);
-	status = lf2->load_file(lf2, dp2, true, &buffer_size, &buffer);
-	if (status != EFI_UNSUPPORTED) {
-		efi_st_error("BootPolicy true must return EFI_UNSUPPORTED\n");
-		return EFI_ST_FAILURE;
-	}
-
-	/*
-	 * Case: Pass buffer size as zero, firmware must return
-	 * EFI_BUFFER_TOO_SMALL and an appropriate size
-	 */
-	buffer_size = 0;
-	status = lf2->load_file(lf2, dp2, false, &buffer_size, NULL);
-	if (status != EFI_BUFFER_TOO_SMALL || !buffer_size) {
-		efi_st_printf("buffer_size: %u\n", (unsigned int)buffer_size);
-		efi_st_printf("status: %x\n", (unsigned int)status);
-		efi_st_error("Buffer size not updated\n");
-		return EFI_ST_FAILURE;
-	}
-
-	/*
-	 * Case: Pass buffer size as smaller than the file_size,
-	 * firmware must return * EFI_BUFFER_TOO_SMALL and an appropriate size
-	 */
-	buffer_size = 1;
-	status = lf2->load_file(lf2, dp2, false, &buffer_size, &buffer);
-	if (status != EFI_BUFFER_TOO_SMALL || buffer_size <= 1) {
-		efi_st_error("Buffer size not updated\n");
-		return EFI_ST_FAILURE;
-	}
-
-	status = boottime->allocate_pool(EFI_BOOT_SERVICES_DATA, buffer_size,
-					 &buf);
-	if (status != EFI_SUCCESS) {
-		efi_st_error("Cannot allocate buffer\n");
-		return EFI_ST_FAILURE;
-	}
-
-	/* Case: Pass correct buffer, load the file and verify checksum*/
-	status = lf2->load_file(lf2, dp2, false, &buffer_size, buf);
-	if (status != EFI_SUCCESS) {
-		efi_st_error("Loading initrd failed\n");
-		return EFI_ST_FAILURE;
-	}
-
-	efi_st_printf("Loaded %u bytes\n", (unsigned int)buffer_size);
-	status = boottime->calculate_crc32(buf, buffer_size, &crc32);
-	if (status != EFI_SUCCESS) {
-		efi_st_error("Could not determine CRC32\n");
-		return EFI_ST_FAILURE;
-	}
-	efi_st_printf("CRC32 %.8x\n", (unsigned int)crc32);
-
-	status = boottime->free_pool(buf);
-	if (status != EFI_SUCCESS) {
-		efi_st_error("Cannot free buffer\n");
-		return EFI_ST_FAILURE;
-	}
-
-	return EFI_ST_SUCCESS;
-}
-
-EFI_UNIT_TEST(load_initrd) = {
-	.name = "load initrd",
-	.phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
-	.setup = setup,
-	.execute = execute,
-	.on_request = true,
-};