@@ -10,6 +10,7 @@
#include <cpu_func.h>
#include <dm.h>
#include <env.h>
+#include <fwu.h>
#include <netdev.h>
#include <nvmxip.h>
#include <part.h>
@@ -1,13 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0+ */
usb_pgood_delay=250
-boot_bank_flag=0x08002000
-kernel_addr_bank_0=0x083EE000
-kernel_addr_bank_1=0x0936E000
-retrieve_kernel_load_addr=
- if itest.l *${boot_bank_flag} == 0; then
- setenv kernel_addr $kernel_addr_bank_0;
- else
- setenv kernel_addr $kernel_addr_bank_1;
- fi;
+boot_bank_flag=0x08005006
kernel_addr_r=0x88200000
@@ -15,7 +15,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0 loglevel=9 ip=dhcp earlyprintk"
-CONFIG_BOOTCOMMAND="run retrieve_kernel_load_addr; echo Loading kernel from $kernel_addr to memory ... ; loadm $kernel_addr $kernel_addr_r 0xc00000; usb start; usb reset; run distro_bootcmd; bootefi $kernel_addr_r $fdtcontroladdr;"
+CONFIG_BOOTCOMMAND="echo Loading kernel from $kernel_addr to memory ... ; loadm $kernel_addr $kernel_addr_r 0xc00000; usb start; usb reset; run distro_bootcmd; bootefi $kernel_addr_r $fdtcontroladdr;"
CONFIG_CONSOLE_RECORD=y
CONFIG_LOGLEVEL=7
# CONFIG_DISPLAY_CPUINFO is not set
@@ -24,11 +24,16 @@ CONFIG_BOARD_LATE_INIT=y
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_CBSIZE=512
# CONFIG_CMD_CONSOLE is not set
+CONFIG_CMD_FWU_METADATA=y
CONFIG_CMD_BOOTZ=y
CONFIG_SYS_BOOTM_LEN=0x800000
# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_NVMXIP=y
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
CONFIG_CMD_LOADM=y
# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
@@ -40,6 +45,8 @@ CONFIG_OF_CONTROL=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_REGMAP=y
+CONFIG_FWU_MDATA=y
+CONFIG_FWU_MDATA_GPT_BLK=y
CONFIG_MISC=y
# CONFIG_MMC is not set
CONFIG_NVMXIP_QSPI=y
@@ -51,6 +58,10 @@ CONFIG_RAM=y
CONFIG_DM_RTC=y
CONFIG_RTC_EMULATION=y
CONFIG_DM_SERIAL=y
+CONFIG_SYSRESET=y
CONFIG_USB=y
CONFIG_USB_ISP1760=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_IGNORE_OSINDICATIONS=y
+CONFIG_FWU_MULTI_BANK_UPDATE=y
CONFIG_ERRNO_STR=y
Enable the newest features: nvmxip, fwu-metadata and gpt. Commands to print the partition info, gpt info and fwu metadata will be available. Adjust also env boot script the address of the bootbank with the new gpt layout, and also remove the not needed kernel address bank0 and bank1 and retrieve function that would test the bank flag before and now we are getting the info from the fwu metadata. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> --- board/armltd/corstone1000/corstone1000.c | 1 + board/armltd/corstone1000/corstone1000.env | 10 +--------- configs/corstone1000_defconfig | 13 ++++++++++++- 3 files changed, 14 insertions(+), 10 deletions(-)