diff mbox series

[v2,5/5] pmic: qcom: dont use dev_read_addr to get USID

Message ID 20231108-b4-qcom-dt-compat-v2-5-713233c72948@linaro.org
State Superseded
Headers show
Series Qualcomm PMIC fixes | expand

Commit Message

Caleb Connolly Nov. 8, 2023, 4:20 p.m. UTC 
Linux DTs stuff a value indicating if the USID is a USID or a GSID in the
reg property, the Linux SPMI driver then reads the two address cells
separately. U-boot's dev_read_addr() doesn't know how to handle this, so
use ofnode_read_u32_index() to get just the USID.

The Qcom pmic driver doesn't have support for GSID handling, so just
ignore the second value for now.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---
 drivers/power/pmic/pmic_qcom.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/power/pmic/pmic_qcom.c b/drivers/power/pmic/pmic_qcom.c
index ad8daf43f06f..f2ac6494811d 100644
--- a/drivers/power/pmic/pmic_qcom.c
+++ b/drivers/power/pmic/pmic_qcom.c
@@ -66,12 +66,19 @@  static const struct udevice_id pmic_qcom_ids[] = {
 static int pmic_qcom_probe(struct udevice *dev)
 {
 	struct pmic_qcom_priv *priv = dev_get_priv(dev);
+	int ret;
 
-	priv->usid = dev_read_addr(dev);
-
-	if (priv->usid == FDT_ADDR_T_NONE)
+	/*
+	 * dev_read_addr() can't be used here because the reg property actually
+	 * contains two discrete values, not a single 64-bit address.
+	 * The address is the first value.
+	 */
+	ret = ofnode_read_u32_index(dev_ofnode(dev), "reg", 0, &priv->usid);
+	if (ret < 0)
 		return -EINVAL;
 
+	debug("usid: %d\n", priv->usid);
+
 	return 0;
 }