From patchwork Tue Dec 19 16:04:29 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 755942 Delivered-To: patch@linaro.org Received: by 2002:adf:b181:0:b0:336:6142:bf13 with SMTP id q1csp1504399wra; Tue, 19 Dec 2023 08:11:16 -0800 (PST) X-Google-Smtp-Source: AGHT+IHl926B9gDlRWYZucBs+l/7eL8gKUlsVduOSUnyQny2XpYhtsXQ5y3KQ5Xdx8Qxdg1GNLUm X-Received: by 2002:a05:6000:12c3:b0:336:5dc1:41e with SMTP id l3-20020a05600012c300b003365dc1041emr2808724wrx.126.1703002274565; Tue, 19 Dec 2023 08:11:14 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1703002274; cv=none; d=google.com; s=arc-20160816; b=sZPT0udRFQEVb8HP7EdYUvmJSN1CiAhSeRM3FwNBVqLFtkEK/YRYyOpnMXzCOguPvA W7GcAO3AMPDF86sw85iXQYcBIh/RUameXO7vW12zs0b2sjOcPe/yFI/1QfA0EX5ISkVF RSDDsr9TSRs/3lx8WtyhLqo0lPTqEi1jkwg/MQbUtYvT7sdghJMlx55mQxjIN6wkB8Bv 3Yl5KbefM424wiymkza5UqfpiCIhGnHqtU7REBUa4MfE2WDxGv3CxEHBfkxNwS4blXMn FPC5z2JIPlFvLNAtYGaECU9FIHd4P2m/+QABt6eCKLNt5ia5mfK6A3pyq2SdMViELq/b iC1Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:cc:to:in-reply-to:references :message-id:content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=+ljen5oRSDtfAEM2vUPL3Dvr0aQ/DKE18GR/C1MkvxI=; fh=GB9E9KzRIiNXhkRWIZbZpSMjbCjxnqnvE8nYuQxq8UI=; b=NQXy3gZbwk77tqZ25J2VnMcs659r/iAYT3rWZQcirebI6JdVqwiNNy2QcmZt4nHvHr 8QyuGvU+BbYTRcvCiANpowPXRUta6d/wgqzYX79SgJWs9/9L6G6PuAV3vmSqGUWxuSBe Zw456AknqNPI3ah7KuN5p3XxyFlFa9oHSCgnjmSITDuOx4TgWvP3G9l+BNmdQsUN48go mipvCng8EmICT8YIUbogE4st4E3/SJiURAZwbgchdlzuJCzBVy/HP+D8REg/qPh1xt7e qzeQ/Cq/pZFKKejvT/Ae1V2bEgKQnL02SEs4+a1+62hWrHDVuTwR9xgWXYsYVwo+576/ HqOg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=UIFgiCsq; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [85.214.62.61]) by mx.google.com with ESMTPS id l13-20020adffe8d000000b0033677a41a42si108358wrr.736.2023.12.19.08.11.10 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 19 Dec 2023 08:11:14 -0800 (PST) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) client-ip=85.214.62.61; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=UIFgiCsq; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 72F34876E4; Tue, 19 Dec 2023 17:10:58 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="UIFgiCsq"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 1625B8786C; Tue, 19 Dec 2023 17:05:27 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS, T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.2 Received: from mail-wm1-x336.google.com (mail-wm1-x336.google.com [IPv6:2a00:1450:4864:20::336]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 251E787889 for ; Tue, 19 Dec 2023 17:04:53 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=caleb.connolly@linaro.org Received: by mail-wm1-x336.google.com with SMTP id 5b1f17b1804b1-40c38de1ee4so47401425e9.0 for ; Tue, 19 Dec 2023 08:04:53 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1703001892; x=1703606692; darn=lists.denx.de; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=+ljen5oRSDtfAEM2vUPL3Dvr0aQ/DKE18GR/C1MkvxI=; b=UIFgiCsqkApGfoK8PlmbcwAfWIGNdGcy61s7McavryVWBtaslLTC3u5WTPQCO70W7l YeDyjxahxts+peOFuI4DpXkwBDXRWkF7gnHT9J86N6DKU09zPzTUmMAkeXhTjoAx2bF1 Q7MBEByrVMB0jZrTIx7RKDra2+6AznfXZFAcUZWLAsYE91m6iXbaikMAGBUFDhzKmJ9f vEismCdjvTjKQSeXbFc+Q/28dl6RvW6rcW4THoglOs0oApVEegRj6Z0zJJetzXcy3RRw QNGoplUd+7VuU7TDPekKCjn1pUUFEgsmPT544zH8U2YIV50roZ06TzASf+0VRSY/oH3O S3BA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1703001892; x=1703606692; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=+ljen5oRSDtfAEM2vUPL3Dvr0aQ/DKE18GR/C1MkvxI=; b=V/cA09dzioxvHSqftlWlhzyxXqPmBTh3JEz6gny8Vpoj8f9JgG/h3ARP+E3B13kEjB 1IJCZeyxg32xk0gzjIGJAPFDPoi3LrINDYTetYdICNG15GhUQtO/xzQRMI+cgr5q8oAc GVcueN5uXi7qEnIxzVXzPvU3E+YG+Y/lNRADXvq0o17kd759hFcTT7busZZ9kgLCQPNo awPRhLgtLO+utA1NyhfHKtk9DYxeqFHin0//Cw2jc8150GmS5eE2Ssb03EiR8vYx4AI9 T977TvZf7bi9wkBVfaA2jz4bIdL/a0r0dMZfsPZFFodZoDnsqxo/SJJFz6Z2HrPv/V/q +txQ== X-Gm-Message-State: AOJu0YxQOa7jLKQk8kou3OfZdWGSruYYBKv/+wWjP5WnbGSbcR2YLpvd R06pW1o7JFs4gDVQ7Upsm2i66w== X-Received: by 2002:a05:600c:3147:b0:40c:3fa7:bba8 with SMTP id h7-20020a05600c314700b0040c3fa7bba8mr8332600wmo.155.1703001891808; Tue, 19 Dec 2023 08:04:51 -0800 (PST) Received: from lion.localdomain (host-92-17-96-230.as13285.net. [92.17.96.230]) by smtp.gmail.com with ESMTPSA id je17-20020a05600c1f9100b0040d1450ca7esm3429723wmb.7.2023.12.19.08.04.50 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 19 Dec 2023 08:04:51 -0800 (PST) From: Caleb Connolly Date: Tue, 19 Dec 2023 16:04:29 +0000 Subject: [PATCH v2 28/32] dts: msm8996: replace with upstream DTS MIME-Version: 1.0 Message-Id: <20231219-b4-qcom-common-target-v2-28-b6dd9704219e@linaro.org> References: <20231219-b4-qcom-common-target-v2-0-b6dd9704219e@linaro.org> In-Reply-To: <20231219-b4-qcom-common-target-v2-0-b6dd9704219e@linaro.org> To: Neil Armstrong , Sumit Garg , Ramon Fried , Dzmitry Sankouski , Caleb Connolly , Peng Fan , Jaehoon Chung , Rayagonda Kokatanur , Lukasz Majewski , Sean Anderson , Jorge Ramirez-Ortiz , Stephan Gerhold Cc: Marek Vasut , u-boot@lists.denx.de X-Mailer: b4 0.13-dev-4bd13 X-Developer-Signature: v=1; a=openpgp-sha256; l=131813; i=caleb.connolly@linaro.org; h=from:subject:message-id; bh=cAKJoM1vyIb1GNQTMQ3LN31iaPdlfmVjXW/TC+2HAHE=; b=owGbwMvMwCFYaeA6f6eBkTjjabUkhtTG/SxfWoIXNWZwrNj3bZXEv/k739+/8Jb5zc816RveV OYHTo390VHKwiDIwSArpsgifmKZZdPay/Ya2xdcgJnDygQyhIGLUwAmolTM8N+b6Z3E0fqV8o68 ijonqs5aNU/idZxkG7X8yPmIDJW5odMY/tc7fnwUn1W+/4lUqqPvojC2iy1zz3pfMl2e+vLK3Ea u9ecA X-Developer-Key: i=caleb.connolly@linaro.org; a=openpgp; fpr=83B24DA7FE145076BC38BB250CD904EB673A7C47 X-Mailman-Approved-At: Tue, 19 Dec 2023 17:10:55 +0100 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Drop the U-Boot specific dragonboard820c.dts file in favour of the upstream apq8096-db820c.dts and an additional -u-boot.dtsi with the U-Boot specific additions. Signed-off-by: Caleb Connolly Reviewed-by: Neil Armstrong --- arch/arm/dts/Makefile | 2 +- arch/arm/dts/apq8096-db820c-u-boot.dtsi | 10 + arch/arm/dts/apq8096-db820c.dts | 1137 +++++++++ arch/arm/dts/dragonboard820c-uboot.dtsi | 32 - arch/arm/dts/dragonboard820c.dts | 153 -- arch/arm/dts/msm8996.dtsi | 3884 +++++++++++++++++++++++++++++++ configs/dragonboard820c_defconfig | 2 +- 7 files changed, 5033 insertions(+), 187 deletions(-) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 836113eb66e4..95470fd6133b 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -601,7 +601,7 @@ dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \ dtb-$(CONFIG_TARGET_TEN64) += fsl-ls1088a-ten64.dtb dtb-$(CONFIG_ARCH_SNAPDRAGON) += apq8016-sbc.dtb \ - dragonboard820c.dtb \ + apq8096-db820c.dtb \ sdm845-db845c.dtb \ sdm845-samsung-starqltechn.dtb \ qcs404-evb.dtb diff --git a/arch/arm/dts/apq8096-db820c-u-boot.dtsi b/arch/arm/dts/apq8096-db820c-u-boot.dtsi new file mode 100644 index 000000000000..6bce5f8d7edf --- /dev/null +++ b/arch/arm/dts/apq8096-db820c-u-boot.dtsi @@ -0,0 +1,10 @@ + +/ { + /* Ensure that the fdtfile variable is generated properly */ + compatible = "qcom,apq8096-db820c", "qcom,apq8096"; +}; + +&sdhc2 { + status = "okay"; + clock-frequency = <100000000>; +}; diff --git a/arch/arm/dts/apq8096-db820c.dts b/arch/arm/dts/apq8096-db820c.dts new file mode 100644 index 000000000000..e8148b3d6c50 --- /dev/null +++ b/arch/arm/dts/apq8096-db820c.dts @@ -0,0 +1,1137 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include +#include +#include +#include +#include +#include + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * P HSEC = Primary High Speed External Connector + * S HSEC = Secondary High Speed External Connector + * J14 = Camera Connector + * TP = Test Points + * + * Line names are taken from the schematic "DragonBoard 820c", + * drawing no: LM25-P2751-1 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + +/ { + model = "Qualcomm Technologies, Inc. DB820c"; + compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; + + aliases { + serial0 = &blsp2_uart2; + serial1 = &blsp2_uart3; + serial2 = &blsp1_uart2; + i2c0 = &blsp1_i2c3; + i2c1 = &blsp2_i2c1; + i2c2 = &blsp2_i2c1; + spi0 = &blsp1_spi1; + spi1 = &blsp2_spi6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 0>; + }; + + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + button { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; + + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + wlan_en: wlan-en-1-8v { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c3 { + /* On Low speed expansion: LS-I2C0 */ + status = "okay"; +}; + +&blsp1_spi1 { + /* On Low speed expansion */ + status = "okay"; +}; + +&blsp1_uart2 { + label = "BT-UART"; + status = "okay"; + + bluetooth { + compatible = "qcom,qca6174-bt"; + + /* bt_disable_n gpio */ + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + + clocks = <&divclk4>; + }; +}; + +&adsp_pil { + status = "okay"; + firmware-name = "qcom/apq8096/adsp.mbn"; +}; + +&blsp2_i2c1 { + /* On High speed expansion: HS-I2C2 */ + status = "okay"; +}; + +&blsp2_i2c1 { + /* On Low speed expansion: LS-I2C1 */ + status = "okay"; +}; + +&blsp2_spi6 { + /* On High speed expansion */ + status = "okay"; +}; + +&blsp2_uart2 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; +}; + +&blsp2_uart3 { + label = "LS-UART0"; + status = "disabled"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart3_4pins_default>; + pinctrl-1 = <&blsp2_uart3_4pins_sleep>; +}; + +&camss { + vdda-supply = <&vreg_l2a_1p25>; +}; + +&gpu { + status = "okay"; +}; + +&hsusb_phy1 { + status = "okay"; + + vdd-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&hsusb_phy2 { + status = "okay"; + + vdd-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&mdss_hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&mss_pil { + status = "okay"; + pll-supply = <&vreg_l12a_1p8>; + firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn"; +}; + +&pm8994_resin { + status = "okay"; + linux,code = ; +}; + +&tlmm { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ + + sdc2_cd_on: sdc2-cd-on-state { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; + }; + + sdc2_cd_off: sdc2-cd-off-state { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + hdmi_hpd_active: hdmi-hpd-active-state { + pins = "gpio34"; + function = "hdmi_hot"; + bias-pull-down; + drive-strength = <16>; + }; + + hdmi_hpd_suspend: hdmi-hpd-suspend-state { + pins = "gpio34"; + function = "hdmi_hot"; + bias-pull-down; + drive-strength = <2>; + }; + + hdmi_ddc_active: hdmi-ddc-active-state { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + drive-strength = <2>; + bias-pull-up; + }; + + hdmi_ddc_suspend: hdmi-ddc-suspend-state { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie1 { + status = "okay"; + perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie2 { + status = "okay"; + perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; + + ls_exp_gpio_f: pm8994-gpio5-state { + pinconf { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = ; /* 1.8V */ + }; + }; + + bt_en_gpios: bt-en-pios-state { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = ; /* 1.8V */ + qcom,drive-strength = ; + bias-pull-down; + }; + }; + + wlan_en_gpios: wlan-en-gpios-state { + pinconf { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = ; /* 1.8V */ + qcom,drive-strength = ; + bias-pull-down; + }; + }; + + audio_mclk: clk-div1-state { + pinconf { + pins = "gpio15"; + function = "func1"; + power-source = ; /* 1.8V */ + }; + }; + + volume_up_gpio: pm8996-gpio2-state { + pinconf { + pins = "gpio2"; + function = "normal"; + input-enable; + drive-push-pull; + bias-pull-up; + qcom,drive-strength = ; + power-source = ; /* 1.8V */ + }; + }; + + divclk4_pin_a: divclk4-state { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + + bias-disable; + power-source = ; + }; + }; + + usb3_vbus_det_gpio: pm8996-gpio22-state { + pinconf { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = ; + power-source = ; /* 1.8V */ + }; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + vdd_s11-supply = <&vph_pwr>; + + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + s11 { + qcom,saw-leader; + regulator-name = "VDD_APCC"; + regulator-always-on; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; + + usb2_vbus_det_gpio: pmi8996-gpio6-state { + pinconf { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = ; + power-source = ; /* 1.8V */ + }; + }; +}; + +&pmi8994_lpg { + qcom,power-source = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmi8994_mpp2_userled4>; + + qcom,dtest = <0 0>, + <0 0>, + <0 0>, + <4 1>; + + status = "okay"; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <1>; + + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led@2 { + reg = <2>; + color = ; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <0>; + }; + + led@3 { + reg = <3>; + color = ; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <2>; + }; + + led@4 { + reg = <4>; + color = ; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <3>; + }; +}; + +&pmi8994_mpps { + pmi8994_mpp2_userled4: mpp2-userled4-state { + pins = "mpp2"; + function = "sink"; + + output-low; + qcom,dtest = <4>; + }; +}; + +&pmi8994_spmi_regulators { + vdd_s2-supply = <&vph_pwr>; + + vdd_gfx: s2 { + regulator-name = "VDD_GFX"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + }; +}; + +&sdhc2 { + /* External SD card */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "DB820c"; + audio-routing = "RX_BIAS", "MCLK", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI"; + cpu { + sound-dai = <&q6afedai HDMI_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&mdss_hdmi 0>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF4_PB>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF1_CAP>; + }; + }; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l25a_1p2>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&usb2 { + status = "okay"; + extcon = <&usb2_id>; +}; + +&usb2_dwc3 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; +}; + +&usb3 { + status = "okay"; + extcon = <&usb3_id>; +}; + +&usb3_dwc3 { + extcon = <&usb3_id>; + dr_mode = "otg"; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&venus { + status = "okay"; +}; diff --git a/arch/arm/dts/dragonboard820c-uboot.dtsi b/arch/arm/dts/dragonboard820c-uboot.dtsi deleted file mode 100644 index d93c7c1fbdee..000000000000 --- a/arch/arm/dts/dragonboard820c-uboot.dtsi +++ /dev/null @@ -1,32 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * U-Boot addition to handle Dragonboard 820c pins - * - * (C) Copyright 2017 Jorge Ramirez-Ortiz - */ - -/ { - smem { - bootph-all; - }; - - soc { - bootph-all; - - pinctrl@1010000 { - bootph-all; - - uart { - bootph-all; - }; - }; - - clock-controller@300000 { - bootph-all; - }; - - serial@75b0000 { - bootph-all; - }; - }; -}; diff --git a/arch/arm/dts/dragonboard820c.dts b/arch/arm/dts/dragonboard820c.dts deleted file mode 100644 index 282c37e28f42..000000000000 --- a/arch/arm/dts/dragonboard820c.dts +++ /dev/null @@ -1,153 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Qualcomm APQ8096 based Dragonboard 820C board device tree source - * - * (C) Copyright 2017 Jorge Ramirez-Ortiz - */ - -/dts-v1/; - -#include "skeleton64.dtsi" -#include - -/ { - model = "Qualcomm Technologies, Inc. DB820c"; - compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - serial0 = &blsp2_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - device_type = "memory"; - reg = <0 0x80000000 0 0xc0000000>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - smem_mem: smem_region@86300000 { - reg = <0x0 0x86300000 0x0 0x200000>; - no-map; - }; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - }; - - soc: soc { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; - compatible = "simple-bus"; - - gcc: clock-controller@300000 { - compatible = "qcom,gcc-msm8996"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0x300000 0x90000>; - }; - - pinctrl: pinctrl@1010000 { - compatible = "qcom,msm8996-pinctrl"; - reg = <0x1010000 0x400000>; - - blsp8_uart: uart { - function = "blsp_uart8"; - pins = "GPIO_4", "GPIO_5"; - drive-strength = <8>; - bias-disable; - }; - }; - - blsp2_uart2: serial@75b0000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x75b0000 0x1000>; - clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>; - clock-names = "core"; - pinctrl-names = "uart"; - pinctrl-0 = <&blsp8_uart>; - }; - - sdhc2: sdhci@74a4900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x74a4900 0x314>, <0x74a4000 0x800>; - index = <0x0>; - bus-width = <4>; - clock = <&gcc GCC_SDCC1_APPS_CLK>; - clock-frequency = <200000000>; - }; - - spmi_bus: spmi@400f000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x0400f000 0x1000>, - <0x04400000 0x800000>, - <0x04c00000 0x800000>, - <0x05800000 0x200000>, - <0x0400a000 0x002100>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - #address-cells = <0x1>; - #size-cells = <0x1>; - - pmic0: pm8994@0 { - compatible = "qcom,spmi-pmic"; - reg = <0x0 0x1>; - #address-cells = <0x1>; - #size-cells = <0x1>; - - pm8994_pon: pon@800 { - compatible = "qcom,pm8916-pon"; - reg = <0x800 0x100>; - mode-bootloader = <0x2>; - mode-recovery = <0x1>; - - pwrkey { - compatible = "qcom,pm8941-pwrkey"; - debounce = <15625>; - bias-pull-up; - }; - - pm8994_resin: resin { - compatible = "qcom,pm8941-resin"; - debounce = <15625>; - bias-pull-up; - }; - }; - - pm8994_gpios: pm8994_gpios@c000 { - compatible = "qcom,pm8994-gpio"; - reg = <0xc000 0x400>; - gpio-controller; - gpio-ranges = <&pm8994_gpios 0 0 22>; - #gpio-cells = <2>; - }; - }; - - pmic1: pm8994@1 { - compatible = "qcom,spmi-pmic"; - reg = <0x1 0x1>; - #address-cells = <0x1>; - #size-cells = <0x1>; - }; - }; - }; - -}; - -#include "dragonboard820c-uboot.dtsi" diff --git a/arch/arm/dts/msm8996.dtsi b/arch/arm/dts/msm8996.dtsi new file mode 100644 index 000000000000..6ba9da9e6a8b --- /dev/null +++ b/arch/arm/dts/msm8996.dtsi @@ -0,0 +1,3884 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; + clocks = <&kryocc 0>; + interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; + clocks = <&kryocc 0>; + interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; + clocks = <&kryocc 1>; + interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU3: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; + clocks = <&kryocc 1>; + interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU2>; + }; + + core1 { + cpu = <&CPU3>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; + arm,psci-suspend-param = <0x00000004>; + entry-latency-us = <130>; + exit-latency-us = <80>; + min-residency-us = <300>; + }; + }; + }; + + cluster0_opp: opp-table-cluster0 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + /* Nominal fmax for now */ + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; + }; + opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; + }; + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; + }; + opp-556800000 { + opp-hz = /bits/ 64 <556800000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; + }; + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <384000>; + }; + opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <460800>; + }; + opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <537600>; + }; + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <672000>; + }; + opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <672000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <825600>; + }; + opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <825600>; + }; + opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <902400>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-supported-hw = <0xd>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1056000>; + }; + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-supported-hw = <0x2>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1132800>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-supported-hw = <0xd>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1132800>; + }; + opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-supported-hw = <0x9>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1190400>; + }; + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-supported-hw = <0x04>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1305600>; + }; + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-supported-hw = <0x9>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1382400>; + }; + }; + + cluster1_opp: opp-table-cluster1 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + /* Nominal fmax for now */ + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; + }; + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; + }; + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; + }; + opp-556800000 { + opp-hz = /bits/ 64 <556800000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; + }; + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; + }; + opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <384000>; + }; + opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <460800>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <537600>; + }; + opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <595200>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <672000>; + }; + opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <672000>; + }; + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <748800>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <825600>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <902400>; + }; + opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <979200>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1056000>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1190400>; + }; + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1228800>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1305600>; + }; + opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-supported-hw = <0xe>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1305600>; + }; + opp-1824000000 { + opp-hz = /bits/ 64 <1824000000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1382400>; + }; + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-supported-hw = <0x4>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1305600>; + }; + opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1459200>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; + }; + opp-2150400000 { + opp-hz = /bits/ 64 <2150400000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8996", "qcom,scm"; + qcom,dload-mode = <&tcsr_2 0x13000>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + rpm: remoteproc { + compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc"; + + glink-edge { + compatible = "qcom,glink-rpm"; + interrupts = ; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8996"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8996-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp1: opp1 { + opp-level = <1>; + }; + + rpmpd_opp2: opp2 { + opp-level = <2>; + }; + + rpmpd_opp3: opp3 { + opp-level = <3>; + }; + + rpmpd_opp4: opp4 { + opp-level = <4>; + }; + + rpmpd_opp5: opp5 { + opp-level = <5>; + }; + + rpmpd_opp6: opp6 { + opp-level = <6>; + }; + }; + }; + }; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x200000>; + no-map; + }; + + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; + no-map; + }; + + rmtfs_mem: rmtfs { + compatible = "qcom,rmtfs-mem"; + + size = <0x0 0x200000>; + alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = ; + }; + + mpss_mem: mpss@88800000 { + reg = <0x0 0x88800000 0x0 0x6200000>; + no-map; + }; + + adsp_mem: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1b00000>; + no-map; + }; + + slpi_mem: slpi@90500000 { + reg = <0x0 0x90500000 0x0 0xa00000>; + no-map; + }; + + gpu_mem: gpu@90f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90f00000 0x0 0x100000>; + no-map; + }; + + venus_mem: venus@91000000 { + reg = <0x0 0x91000000 0x0 0x500000>; + no-map; + }; + + mba_mem: mba@91500000 { + reg = <0x0 0x91500000 0x0 0x200000>; + no-map; + }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; + size = <0x0 0x4000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = ; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + mpss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + mpss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = ; + + mboxes = <&apcs_glb 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + pcie_phy: phy-wrapper@34000 { + compatible = "qcom,msm8996-qmp-pcie-phy"; + reg = <0x00034000 0x488>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00034000 0x4000>; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_PCIE_PHY_BCR>, + <&gcc GCC_PCIE_PHY_COM_BCR>, + <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; + reset-names = "phy", "common", "cfg"; + + status = "disabled"; + + pciephy_0: phy@1000 { + reg = <0x1000 0x130>, + <0x1200 0x200>, + <0x1400 0x1dc>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "lane0"; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk_src"; + + #phy-cells = <0>; + }; + + pciephy_1: phy@2000 { + reg = <0x2000 0x130>, + <0x2200 0x200>, + <0x2400 0x1dc>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe1"; + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "lane1"; + + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk_src"; + + #phy-cells = <0>; + }; + + pciephy_2: phy@3000 { + reg = <0x3000 0x130>, + <0x3200 0x200>, + <0x3400 0x1dc>; + + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "pipe2"; + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + reset-names = "lane2"; + + #clock-cells = <0>; + clock-output-names = "pcie_2_pipe_clk_src"; + + #phy-cells = <0>; + }; + }; + + rpm_msg_ram: sram@68000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00068000 0x6000>; + }; + + qfprom@74000 { + compatible = "qcom,msm8996-qfprom", "qcom,qfprom"; + reg = <0x00074000 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx_trim@24e { + reg = <0x24e 0x2>; + bits = <5 4>; + }; + + qusb2s_hstx_trim: hstx_trim@24f { + reg = <0x24f 0x1>; + bits = <1 4>; + }; + + speedbin_efuse: speedbin@133 { + reg = <0x133 0x1>; + bits = <5 3>; + }; + }; + + rng: rng@83000 { + compatible = "qcom,prng-ee"; + reg = <0x00083000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + gcc: clock-controller@300000 { + compatible = "qcom,gcc-msm8996"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00300000 0x90000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_LN_BB_CLK>, + <&sleep_clk>, + <&pciephy_0>, + <&pciephy_1>, + <&pciephy_2>, + <&ssusb_phy_0>, + <&ufsphy_lane 0>, + <&ufsphy_lane 1>, + <&ufsphy_lane 2>; + clock-names = "cxo", + "cxo2", + "sleep_clk", + "pcie_0_pipe_clk_src", + "pcie_1_pipe_clk_src", + "pcie_2_pipe_clk_src", + "usb3_phy_pipe_clk_src", + "ufs_rx_symbol_0_clk_src", + "ufs_rx_symbol_1_clk_src", + "ufs_tx_symbol_0_clk_src"; + }; + + bimc: interconnect@408000 { + compatible = "qcom,msm8996-bimc"; + reg = <0x00408000 0x5a000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + tsens0: thermal-sensor@4a9000 { + compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + #qcom,sensors = <13>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@4ad000 { + compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; + reg = <0x004ad000 0x1000>, /* TM */ + <0x004ac000 0x1000>; /* SROT */ + #qcom,sensors = <8>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + cryptobam: dma-controller@644000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00644000 0x24000>; + interrupts = ; + clocks = <&gcc GCC_CE1_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + }; + + crypto: crypto@67a000 { + compatible = "qcom,crypto-v5.4"; + reg = <0x0067a000 0x6000>; + clocks = <&gcc GCC_CE1_AHB_CLK>, + <&gcc GCC_CE1_AXI_CLK>, + <&gcc GCC_CE1_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + }; + + cnoc: interconnect@500000 { + compatible = "qcom,msm8996-cnoc"; + reg = <0x00500000 0x1000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + snoc: interconnect@524000 { + compatible = "qcom,msm8996-snoc"; + reg = <0x00524000 0x1c000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + a0noc: interconnect@543000 { + compatible = "qcom,msm8996-a0noc"; + reg = <0x00543000 0x6000>; + #interconnect-cells = <1>; + clock-names = "aggre0_snoc_axi", + "aggre0_cnoc_ahb", + "aggre0_noc_mpu_cfg"; + clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>, + <&gcc GCC_AGGRE0_CNOC_AHB_CLK>, + <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>; + power-domains = <&gcc AGGRE0_NOC_GDSC>; + }; + + a1noc: interconnect@562000 { + compatible = "qcom,msm8996-a1noc"; + reg = <0x00562000 0x5000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>; + }; + + a2noc: interconnect@583000 { + compatible = "qcom,msm8996-a2noc"; + reg = <0x00583000 0x7000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi"; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_UFS_AXI_CLK>; + }; + + mnoc: interconnect@5a4000 { + compatible = "qcom,msm8996-mnoc"; + reg = <0x005a4000 0x1c000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a", "iface"; + clocks = <&rpmcc RPM_SMD_MMAXI_CLK>, + <&rpmcc RPM_SMD_MMAXI_A_CLK>, + <&mmcc AHB_CLK_SRC>; + }; + + pnoc: interconnect@5c0000 { + compatible = "qcom,msm8996-pnoc"; + reg = <0x005c0000 0x3000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + }; + + tcsr_mutex: hwlock@740000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x00740000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_1: syscon@760000 { + compatible = "qcom,tcsr-msm8996", "syscon"; + reg = <0x00760000 0x20000>; + }; + + tcsr_2: syscon@7a0000 { + compatible = "qcom,tcsr-msm8996", "syscon"; + reg = <0x007a0000 0x18000>; + }; + + mmcc: clock-controller@8c0000 { + compatible = "qcom,mmcc-msm8996"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x008c0000 0x40000>; + clocks = <&xo_board>, + <&gcc GPLL0>, + <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_hdmi_phy>; + clock-names = "xo", + "gpll0", + "gcc_mmss_noc_cfg_ahb_clk", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "hdmipll"; + assigned-clocks = <&mmcc MMPLL9_PLL>, + <&mmcc MMPLL1_PLL>, + <&mmcc MMPLL3_PLL>, + <&mmcc MMPLL4_PLL>, + <&mmcc MMPLL5_PLL>; + assigned-clock-rates = <624000000>, + <810000000>, + <980000000>, + <960000000>, + <825000000>; + }; + + mdss: display-subsystem@900000 { + compatible = "qcom,mdss"; + + reg = <0x00900000 0x1000>, + <0x009b0000 0x1040>, + <0x009b8000 0x1040>; + reg-names = "mdss_phys", + "vbif_phys", + "vbif_nrt_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + mdp: display-controller@901000 { + compatible = "qcom,msm8996-mdp5", "qcom,mdp5"; + reg = <0x00901000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "iommu", + "vsync"; + + iommus = <&mdp_smmu 0>; + + assigned-clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + assigned-clock-rates = <300000000>, + <19200000>; + + interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, + <&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>, + <&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf3_out: endpoint { + remote-endpoint = <&mdss_hdmi_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@994000 { + compatible = "qcom,msm8996-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x00994000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "byte", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + phys = <&mdss_dsi0_phy>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@994400 { + compatible = "qcom,dsi-phy-14nm"; + reg = <0x00994400 0x100>, + <0x00994500 0x300>, + <0x00994800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + status = "disabled"; + }; + + mdss_dsi1: dsi@996000 { + compatible = "qcom,msm8996-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x00996000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "byte", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + + phys = <&mdss_dsi1_phy>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@996400 { + compatible = "qcom,dsi-phy-14nm"; + reg = <0x00996400 0x100>, + <0x00996500 0x300>, + <0x00996800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + status = "disabled"; + }; + + mdss_hdmi: hdmi-tx@9a0000 { + compatible = "qcom,hdmi-tx-8996"; + reg = <0x009a0000 0x50c>, + <0x00070000 0x6158>, + <0x009e0000 0xfff>; + reg-names = "core_physical", + "qfprom_physical", + "hdcp_physical"; + + interrupt-parent = <&mdss>; + interrupts = <8>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_HDMI_CLK>, + <&mmcc MDSS_HDMI_AHB_CLK>, + <&mmcc MDSS_EXTPCLK_CLK>; + clock-names = + "mdp_core", + "iface", + "core", + "alt_iface", + "extp"; + + phys = <&mdss_hdmi_phy>; + #sound-dai-cells = <1>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_hdmi_in: endpoint { + remote-endpoint = <&mdp5_intf3_out>; + }; + }; + }; + }; + + mdss_hdmi_phy: phy@9a0600 { + #phy-cells = <0>; + compatible = "qcom,hdmi-phy-8996"; + reg = <0x009a0600 0x1c4>, + <0x009a0a00 0x124>, + <0x009a0c00 0x124>, + <0x009a0e00 0x124>, + <0x009a1000 0x124>, + <0x009a1200 0x0c8>; + reg-names = "hdmi_pll", + "hdmi_tx_l0", + "hdmi_tx_l1", + "hdmi_tx_l2", + "hdmi_tx_l3", + "hdmi_phy"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&gcc GCC_HDMI_CLKREF_CLK>, + <&xo_board>; + clock-names = "iface", + "ref", + "xo"; + + #clock-cells = <0>; + + status = "disabled"; + }; + }; + + gpu: gpu@b00000 { + compatible = "qcom,adreno-530.2", "qcom,adreno"; + + reg = <0x00b00000 0x3f000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = ; + + clocks = <&mmcc GPU_GX_GFX3D_CLK>, + <&mmcc GPU_AHB_CLK>, + <&mmcc GPU_GX_RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_MMSS_BIMC_GFX_CLK>; + + clock-names = "core", + "iface", + "rbbmtimer", + "mem", + "mem_iface"; + + interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>; + interconnect-names = "gfx-mem"; + + power-domains = <&mmcc GPU_GX_GDSC>; + iommus = <&adreno_smmu 0>; + + nvmem-cells = <&speedbin_efuse>; + nvmem-cell-names = "speed_bin"; + + operating-points-v2 = <&gpu_opp_table>; + + status = "disabled"; + + #cooling-cells = <2>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * 624Mhz is only available on speed bins 0 and 3. + * 560Mhz is only available on speed bins 0, 2 and 3. + * All the rest are available on all bins of the hardware. + */ + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-supported-hw = <0x09>; + }; + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-supported-hw = <0x0d>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-supported-hw = <0xff>; + }; + opp-401800000 { + opp-hz = /bits/ 64 <401800000>; + opp-supported-hw = <0xff>; + }; + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-supported-hw = <0xff>; + }; + opp-214000000 { + opp-hz = /bits/ 64 <214000000>; + opp-supported-hw = <0xff>; + }; + opp-133000000 { + opp-hz = /bits/ 64 <133000000>; + opp-supported-hw = <0xff>; + }; + }; + + zap-shader { + memory-region = <&gpu_mem>; + }; + }; + + tlmm: pinctrl@1010000 { + compatible = "qcom,msm8996-pinctrl"; + reg = <0x01010000 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 150>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_spi1_default: blsp1-spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp1_spi1_sleep: blsp1-spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart2_2pins_default: blsp2-uart2-2pins-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_default: blsp2-i2c2-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c8"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_default: blsp1-i2c6-state { + pins = "gpio27", "gpio28"; + function = "blsp_i2c6"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { + pins = "gpio27", "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_default: cci0-default-state { + pins = "gpio17", "gpio18"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + camera0_state_on: + camera_rear_default: camera-rear-default-state { + camera0_mclk: mclk0-pins { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + camera0_rst: rst-pins { + pins = "gpio25"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + camera0_pwdn: pwdn-pins { + pins = "gpio26"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + }; + + cci1_default: cci1-default-state { + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + camera1_state_on: + camera_board_default: camera-board-default-state { + mclk1-pins { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + pwdn-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst-pins { + pins = "gpio104"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera2_state_on: + camera_front_default: camera-front-default-state { + camera2_mclk: mclk2-pins { + pins = "gpio15"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + camera2_rst: rst-pins { + pins = "gpio23"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + pwdn-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + }; + + pcie0_state_on: pcie0-state-on-state { + perst-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio36"; + function = "pci_e0"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie0_state_off: pcie0-state-off-state { + perst-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio36"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-pins { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp1_uart2_default: blsp1-uart2-default-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_default: blsp1-i2c3-default-state { + pins = "gpio47", "gpio48"; + function = "blsp_i2c3"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { + pins = "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart3_4pins_default: blsp2-uart3-4pins-state { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "blsp_uart9"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "blsp_uart9"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c3_default: blsp2-i2c3-state-state { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c3_sleep: blsp2-i2c3-sleep-state { + pins = "gpio51", "gpio52"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcd_intr_default: wcd-intr-default-state { + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_i2c1_default: blsp2-i2c1-state { + pins = "gpio55", "gpio56"; + function = "blsp_i2c7"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { + pins = "gpio55", "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_default: blsp2-i2c5-state { + pins = "gpio60", "gpio61"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + /* Sleep state for BLSP2_I2C5 is missing.. */ + + cdc_reset_active: cdc-reset-active-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <16>; + bias-pull-down; + output-high; + }; + + cdc_reset_sleep: cdc-reset-sleep-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + blsp2_spi6_default: blsp2-spi6-default-state { + spi-pins { + pins = "gpio85", "gpio86", "gpio88"; + function = "blsp_spi12"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio87"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp2_spi6_sleep: blsp2-spi6-sleep-state { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_i2c6_default: blsp2-i2c6-state { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { + pins = "gpio87", "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie1_state_on: pcie1-on-state { + perst-pins { + pins = "gpio130"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio131"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio132"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie1_state_off: pcie1-off-state { + /* Perst is missing? */ + clkreq-pins { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-pins { + pins = "gpio132"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie2_state_on: pcie2-on-state { + perst-pins { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio115"; + function = "pci_e2"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio116"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie2_state_off: pcie2-off-state { + /* Perst is missing? */ + clkreq-pins { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-pins { + pins = "gpio116"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + + spmi_bus: spmi@400f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0400f000 0x1000>, + <0x04400000 0x800000>, + <0x04c00000 0x800000>, + <0x05800000 0x200000>, + <0x0400a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + bus@0 { + power-domains = <&gcc AGGRE0_NOC_GDSC>; + compatible = "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xffffffff>; + + pcie0: pcie@600000 { + compatible = "qcom,pcie-msm8996"; + status = "disabled"; + power-domains = <&gcc PCIE0_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + reg = <0x00600000 0x2000>, + <0x0c000000 0xf1d>, + <0x0c000f20 0xa8>, + <0x0c100000 0x100000>; + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_0>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>, + <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + + device_type = "pci"; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie0_state_on>; + pinctrl-1 = <&pcie0_state_off>; + + linux,pci-domain = <0>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; + + pcie1: pcie@608000 { + compatible = "qcom,pcie-msm8996"; + power-domains = <&gcc PCIE1_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + status = "disabled"; + + reg = <0x00608000 0x2000>, + <0x0d000000 0xf1d>, + <0x0d000f20 0xa8>, + <0x0d100000 0x100000>; + + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_1>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>, + <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + + device_type = "pci"; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie1_state_on>; + pinctrl-1 = <&pcie1_state_off>; + + linux,pci-domain = <1>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; + + pcie2: pcie@610000 { + compatible = "qcom,pcie-msm8996"; + power-domains = <&gcc PCIE2_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + status = "disabled"; + reg = <0x00610000 0x2000>, + <0x0e000000 0xf1d>, + <0x0e000f20 0xa8>, + <0x0e100000 0x100000>; + + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_2>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>, + <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; + + device_type = "pci"; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie2_state_on>; + pinctrl-1 = <&pcie2_state_off>; + + linux,pci-domain = <2>; + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; + }; + + ufshc: ufshc@624000 { + compatible = "qcom,msm8996-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x00624000 0x2500>; + interrupts = ; + + phys = <&ufsphy_lane>; + phy-names = "ufsphy"; + + power-domains = <&gcc UFS_GDSC>; + + clock-names = + "core_clk_src", + "core_clk", + "bus_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro_src", + "core_clk_unipro", + "core_clk_ice", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk"; + clocks = + <&gcc UFS_AXI_CLK_SRC>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc UFS_ICE_CORE_CLK_SRC>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_ICE_CORE_CLK>, + <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>; + freq-table-hz = + <100000000 200000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <150000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &cnoc SLAVE_UFS_CFG>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + + lanes-per-direction = <1>; + #reset-cells = <1>; + status = "disabled"; + }; + + ufsphy: phy@627000 { + compatible = "qcom,msm8996-qmp-ufs-phy"; + reg = <0x00627000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_UFS_CLKREF_CLK>; + clock-names = "ref"; + + resets = <&ufshc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufsphy_lane: phy@627400 { + reg = <0x627400 0x12c>, + <0x627600 0x200>, + <0x627c00 0x1b4>; + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; + + camss: camss@a34000 { + compatible = "qcom,msm8996-camss"; + reg = <0x00a34000 0x1000>, + <0x00a00030 0x4>, + <0x00a35000 0x1000>, + <0x00a00038 0x4>, + <0x00a36000 0x1000>, + <0x00a00040 0x4>, + <0x00a30000 0x100>, + <0x00a30400 0x100>, + <0x00a30800 0x100>, + <0x00a30c00 0x100>, + <0x00a31000 0x500>, + <0x00a00020 0x10>, + <0x00a10000 0x1000>, + <0x00a14000 0x1000>; + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "csi_clk_mux", + "vfe0", + "vfe1"; + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "vfe0", + "vfe1"; + power-domains = <&mmcc VFE0_GDSC>, + <&mmcc VFE1_GDSC>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CSI0PHY_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CSI1PHY_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CSI2PHY_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CSI3PHY_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_AHB_CLK>, + <&mmcc CAMSS_VFE_AXI_CLK>; + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe0_ahb", + "vfe0_stream", + "vfe1", + "csi_vfe1", + "vfe1_ahb", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; + iommus = <&vfe_smmu 0>, + <&vfe_smmu 1>, + <&vfe_smmu 2>, + <&vfe_smmu 3>; + status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci: cci@a0c000 { + compatible = "qcom,msm8996-cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa0c000 0x1000>; + interrupts = ; + power-domains = <&mmcc CAMSS_GDSC>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CLK>, + <&mmcc CAMSS_AHB_CLK>; + clock-names = "camss_top_ahb", + "cci_ahb", + "cci", + "camss_ahb"; + assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CLK>; + assigned-clock-rates = <80000000>, <37500000>; + pinctrl-names = "default"; + pinctrl-0 = <&cci0_default &cci1_default>; + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + adreno_smmu: iommu@b40000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; + reg = <0x00b40000 0x10000>; + + #global-interrupts = <1>; + interrupts = , + , + ; + #iommu-cells = <1>; + + clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>, + <&mmcc GPU_AHB_CLK>; + clock-names = "bus", "iface"; + + power-domains = <&mmcc GPU_GDSC>; + }; + + venus: video-codec@c00000 { + compatible = "qcom,msm8996-venus"; + reg = <0x00c00000 0xff000>; + interrupts = ; + power-domains = <&mmcc VENUS_GDSC>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc VIDEO_MAXI_CLK>; + clock-names = "core", "iface", "bus", "mbus"; + interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>; + interconnect-names = "video-mem", "cpu-cfg"; + iommus = <&venus_smmu 0x00>, + <&venus_smmu 0x01>, + <&venus_smmu 0x0a>, + <&venus_smmu 0x07>, + <&venus_smmu 0x0e>, + <&venus_smmu 0x0f>, + <&venus_smmu 0x08>, + <&venus_smmu 0x09>, + <&venus_smmu 0x0b>, + <&venus_smmu 0x0c>, + <&venus_smmu 0x0d>, + <&venus_smmu 0x10>, + <&venus_smmu 0x11>, + <&venus_smmu 0x21>, + <&venus_smmu 0x28>, + <&venus_smmu 0x29>, + <&venus_smmu 0x2b>, + <&venus_smmu 0x2c>, + <&venus_smmu 0x2d>, + <&venus_smmu 0x31>; + memory-region = <&venus_mem>; + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE1_GDSC>; + }; + }; + + mdp_smmu: iommu@d00000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x00d00000 0x10000>; + + #global-interrupts = <1>; + interrupts = , + , + ; + #iommu-cells = <1>; + clocks = <&mmcc SMMU_MDP_AXI_CLK>, + <&mmcc SMMU_MDP_AHB_CLK>; + clock-names = "bus", "iface"; + + power-domains = <&mmcc MDSS_GDSC>; + }; + + venus_smmu: iommu@d40000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x00d40000 0x20000>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + ; + power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; + clocks = <&mmcc SMMU_VIDEO_AXI_CLK>, + <&mmcc SMMU_VIDEO_AHB_CLK>; + clock-names = "bus", "iface"; + #iommu-cells = <1>; + status = "okay"; + }; + + vfe_smmu: iommu@da0000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x00da0000 0x10000>; + + #global-interrupts = <1>; + interrupts = , + , + ; + power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; + clocks = <&mmcc SMMU_VFE_AXI_CLK>, + <&mmcc SMMU_VFE_AHB_CLK>; + clock-names = "bus", "iface"; + #iommu-cells = <1>; + }; + + lpass_q6_smmu: iommu@1600000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x01600000 0x20000>; + #iommu-cells = <1>; + power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; + + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + + clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>, + <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>; + clock-names = "bus", "iface"; + }; + + slpi_pil: remoteproc@1c00000 { + compatible = "qcom,msm8996-slpi-pil"; + reg = <0x01c00000 0x4000>; + + interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&xo_board>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "xo", "aggre2"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8996_VDDSSCX>; + power-domain-names = "ssc_cx"; + + status = "disabled"; + + smd-edge { + interrupts = ; + + label = "dsps"; + mboxes = <&apcs_glb 25>; + qcom,smd-edge = <3>; + qcom,remote-pid = <3>; + }; + }; + + mss_pil: remoteproc@2080000 { + compatible = "qcom,msm8996-mss-pil"; + reg = <0x2080000 0x100>, + <0x2180000 0x020>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>, + <&gcc GCC_MSS_GPLL0_DIV_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "pnoc", "qdss"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + power-domains = <&rpmpd MSM8996_VDDCX>, + <&rpmpd MSM8996_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&mpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + metadata { + memory-region = <&mdata_mem>; + }; + + smd-edge { + interrupts = ; + + label = "mpss"; + mboxes = <&apcs_glb 12>; + qcom,smd-edge = <0>; + qcom,remote-pid = <1>; + }; + }; + + stm@3002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x3002000 0x1000>, + <0x8280000 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = + <&funnel0_in>; + }; + }; + }; + }; + + tpiu@3020000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x3020000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = + <&replicator_out1>; + }; + }; + }; + }; + + funnel@3021000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3021000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in: endpoint { + remote-endpoint = + <&stm_out>; + }; + }; + }; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + }; + + funnel@3022000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3022000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + funnel1_in: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = + <&merge_funnel_in1>; + }; + }; + }; + }; + + funnel@3023000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3023000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = + <&merge_funnel_in2>; + }; + }; + }; + }; + + funnel@3025000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3025000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = + <&funnel1_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = + <&funnel2_out>; + }; + }; + }; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = + <&etf_in>; + }; + }; + }; + }; + + replicator@3026000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x3026000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = + <&etf_out>; + }; + }; + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = + <&etr_in>; + }; + }; + + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = + <&tpiu_in>; + }; + }; + }; + }; + + etf@3027000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x3027000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + }; + + etr@3028000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x3028000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out0>; + }; + }; + }; + }; + + debug@3810000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3810000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + }; + + etm@3840000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3840000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel0_in0>; + }; + }; + }; + }; + + debug@3910000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3910000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + }; + + etm@3940000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3940000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel0_in1>; + }; + }; + }; + }; + + funnel@39b0000 { /* APSS Funnel 0 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x39b0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel0_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel0_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + }; + + out-ports { + port { + apss_funnel0_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in0>; + }; + }; + }; + }; + + debug@3a10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3a10000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + }; + + etm@3a40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3a40000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel1_in0>; + }; + }; + }; + }; + + debug@3b10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3b10000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + }; + + etm@3b40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3b40000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel1_in1>; + }; + }; + }; + }; + + funnel@3bb0000 { /* APSS Funnel 1 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3bb0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel1_in0: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel1_in1: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + apss_funnel1_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in1>; + }; + }; + }; + }; + + funnel@3bc0000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3bc0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_merge_funnel_in0: endpoint { + remote-endpoint = + <&apss_funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_merge_funnel_in1: endpoint { + remote-endpoint = + <&apss_funnel1_out>; + }; + }; + }; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel1_in>; + }; + }; + }; + }; + + kryocc: clock-controller@6400000 { + compatible = "qcom,msm8996-apcc"; + reg = <0x06400000 0x90000>; + + clock-names = "xo", "sys_apcs_aux"; + clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; + + #clock-cells = <1>; + }; + + usb3: usb@6af8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0x06af8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupts = , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>; + interconnect-names = "usb-ddr", "apps-usb"; + + power-domains = <&gcc USB30_GDSC>; + status = "disabled"; + + usb3_dwc3: usb@6a00000 { + compatible = "snps,dwc3"; + reg = <0x06a00000 0xcc00>; + interrupts = ; + phys = <&hsusb_phy1>, <&ssusb_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + snps,hird-threshold = /bits/ 8 <0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,is-utmi-l1-suspend; + tx-fifo-resize; + }; + }; + + usb3phy: phy@7410000 { + compatible = "qcom,msm8996-qmp-usb3-phy"; + reg = <0x07410000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", "common"; + status = "disabled"; + + ssusb_phy_0: phy@7410200 { + reg = <0x07410200 0x200>, + <0x07410400 0x130>, + <0x07410600 0x1a8>; + #phy-cells = <0>; + + #clock-cells = <0>; + clock-output-names = "usb3_phy_pipe_clk_src"; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + }; + }; + + hsusb_phy1: phy@7411000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x07411000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2p_hstx_trim>; + status = "disabled"; + }; + + hsusb_phy2: phy@7412000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x07412000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX2_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + nvmem-cells = <&qusb2s_hstx_trim>; + status = "disabled"; + }; + + sdhc1: mmc@7464900 { + compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07464900 0x11c>, <0x07464000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clock-names = "iface", "core", "xo"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + resets = <&gcc GCC_SDCC1_BCR>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc2: mmc@74a4900 { + compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x074a4900 0x314>, <0x074a4000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clock-names = "iface", "core", "xo"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + resets = <&gcc GCC_SDCC2_BCR>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + + bus-width = <4>; + status = "disabled"; + }; + + blsp1_dma: dma-controller@7544000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07544000 0x2b000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart2: serial@7570000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x07570000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi1: spi@7575000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07575000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_spi1_default>; + pinctrl-1 = <&blsp1_spi1_sleep>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c3: i2c@7577000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07577000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c6: i2c@757a000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x757a000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; + dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma-controller@7584000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07584000 0x2b000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp2_uart2: serial@75b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x075b0000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_uart3: serial@75b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x075b1000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_i2c1: i2c@75b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b5000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c1_default>; + pinctrl-1 = <&blsp2_i2c1_sleep>; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c2: i2c@75b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b6000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; + dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c3: i2c@75b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b7000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c3_default>; + pinctrl-1 = <&blsp2_i2c3_sleep>; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c5: i2c@75b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x75b9000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_i2c5_default>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c6: i2c@75ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x75ba000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c6_default>; + pinctrl-1 = <&blsp2_i2c6_sleep>; + dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi6: spi@75ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x075ba000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_spi6_default>; + pinctrl-1 = <&blsp2_spi6_sleep>; + dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb2: usb@76f8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0x076f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupts = ; + interrupt-names = "hs_phy_irq"; + + clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <60000000>; + + power-domains = <&gcc USB30_GDSC>; + qcom,select-utmi-as-pipe-clk; + status = "disabled"; + + usb2_dwc3: usb@7600000 { + compatible = "snps,dwc3"; + reg = <0x07600000 0xcc00>; + interrupts = ; + phys = <&hsusb_phy2>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + }; + }; + + slimbam: dma-controller@9184000 { + compatible = "qcom,bam-v1.7.0"; + qcom,controlled-remotely; + reg = <0x09184000 0x32000>; + num-channels = <31>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,num-ees = <2>; + }; + + slim_msm: slim-ngd@91c0000 { + compatible = "qcom,slim-ngd-v1.5.0"; + reg = <0x091c0000 0x2c000>; + interrupts = ; + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + adsp_pil: remoteproc@9300000 { + compatible = "qcom,msm8996-adsp-pil"; + reg = <0x09300000 0x80000>; + + interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8996_VDDCX>; + power-domain-names = "cx"; + + status = "disabled"; + + smd-edge { + interrupts = ; + + label = "lpass"; + mboxes = <&apcs_glb 8>; + qcom,smd-edge = <1>; + qcom,remote-pid = <2>; + + apr { + power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,domain = ; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = ; + compatible = "qcom,q6core"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = ; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + dai@1 { + reg = <1>; + }; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = ; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&lpass_q6_smmu 1>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = ; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; + }; + + apcs_glb: mailbox@9820000 { + compatible = "qcom,msm8996-apcs-hmss-global"; + reg = <0x09820000 0x1000>; + + #mbox-cells = <1>; + #clock-cells = <0>; + }; + + timer@9840000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x09840000 0x1000>; + clock-frequency = <19200000>; + + frame@9850000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x09850000 0x1000>, + <0x09860000 0x1000>; + }; + + frame@9870000 { + frame-number = <1>; + interrupts = ; + reg = <0x09870000 0x1000>; + status = "disabled"; + }; + + frame@9880000 { + frame-number = <2>; + interrupts = ; + reg = <0x09880000 0x1000>; + status = "disabled"; + }; + + frame@9890000 { + frame-number = <3>; + interrupts = ; + reg = <0x09890000 0x1000>; + status = "disabled"; + }; + + frame@98a0000 { + frame-number = <4>; + interrupts = ; + reg = <0x098a0000 0x1000>; + status = "disabled"; + }; + + frame@98b0000 { + frame-number = <5>; + interrupts = ; + reg = <0x098b0000 0x1000>; + status = "disabled"; + }; + + frame@98c0000 { + frame-number = <6>; + interrupts = ; + reg = <0x098c0000 0x1000>; + status = "disabled"; + }; + }; + + saw3: syscon@9a10000 { + compatible = "syscon"; + reg = <0x09a10000 0x1000>; + }; + + cbf: clock-controller@9a11000 { + compatible = "qcom,msm8996-cbf"; + reg = <0x09a11000 0x10000>; + clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; + #clock-cells = <0>; + #interconnect-cells = <1>; + }; + + intc: interrupt-controller@9bc0000 { + compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + reg = <0x09bc0000 0x10000>, + <0x09c00000 0x100000>; + interrupts = ; + }; + }; + + sound: sound { + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu2_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + m4m-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + m4m_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + l3-or-venus-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + l3_or_venus_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cluster0_l2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster1-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cluster1_l2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/configs/dragonboard820c_defconfig b/configs/dragonboard820c_defconfig index 5a8cfb7d7a25..b622f309cc48 100644 --- a/configs/dragonboard820c_defconfig +++ b/configs/dragonboard820c_defconfig @@ -7,7 +7,7 @@ CONFIG_SYS_MALLOC_LEN=0x804000 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007fff0 CONFIG_ENV_SIZE=0x4000 -CONFIG_DEFAULT_DEVICE_TREE="dragonboard820c" +CONFIG_DEFAULT_DEVICE_TREE="apq8096-db820c" CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 820C" CONFIG_SYS_LOAD_ADDR=0x80080000 CONFIG_DISTRO_DEFAULTS=y