diff mbox series

[13/16] arm64: zynqmp: Fix addresses in partition definitions

Message ID ee1e941415455a5615d0c5d519e52685d23ba6ef.1582028304.git.michal.simek@xilinx.com
State Accepted
Commit 5df63a60aa3b509382d11c9115f22b54f86eef05
Headers show
Series xilinx: DT sync up | expand

Commit Message

Michal Simek Feb. 18, 2020, 12:20 p.m. UTC
Node name should be <name>@<address> which is not how partitions are
described.

Issue was found by running dtbs_check as:
flash at 0: 'partition at qspi-device-tree', 'partition at qspi-fsbl-uboot',
'partition at qspi-linux', 'partition at qspi-rootfs'
do not match any of the regexes: ...

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/dts/zynqmp-zc1232-revA.dts      | 8 ++++----
 arch/arm/dts/zynqmp-zc1254-revA.dts      | 8 ++++----
 arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 8 ++++----
 arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts | 8 ++++----
 arch/arm/dts/zynqmp-zcu102-revA.dts      | 8 ++++----
 arch/arm/dts/zynqmp-zcu104-revA.dts      | 8 ++++----
 arch/arm/dts/zynqmp-zcu104-revC.dts      | 8 ++++----
 arch/arm/dts/zynqmp-zcu106-revA.dts      | 8 ++++----
 arch/arm/dts/zynqmp-zcu111-revA.dts      | 8 ++++----
 arch/arm/dts/zynqmp-zcu1275-revA.dts     | 8 ++++----
 arch/arm/dts/zynqmp-zcu1275-revB.dts     | 8 ++++----
 11 files changed, 44 insertions(+), 44 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/zynqmp-zc1232-revA.dts b/arch/arm/dts/zynqmp-zc1232-revA.dts
index 87152afc32f5..cdd1c688abc8 100644
--- a/arch/arm/dts/zynqmp-zc1232-revA.dts
+++ b/arch/arm/dts/zynqmp-zc1232-revA.dts
@@ -48,19 +48,19 @@ 
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition at qspi-fsbl-uboot { /* for testing purpose */
+		partition at 0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition at qspi-linux { /* for testing purpose */
+		partition at 10000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition at qspi-device-tree { /* for testing purpose */
+		partition at 600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition at qspi-rootfs { /* for testing purpose */
+		partition at 620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zc1254-revA.dts b/arch/arm/dts/zynqmp-zc1254-revA.dts
index d6b2834f3aa6..f13788042314 100644
--- a/arch/arm/dts/zynqmp-zc1254-revA.dts
+++ b/arch/arm/dts/zynqmp-zc1254-revA.dts
@@ -48,19 +48,19 @@ 
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition at qspi-fsbl-uboot { /* for testing purpose */
+		partition at 0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition at qspi-linux { /* for testing purpose */
+		partition at 10000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition at qspi-device-tree { /* for testing purpose */
+		partition at 600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition at qspi-rootfs { /* for testing purpose */
+		partition at 620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index fa3824d2a126..05be495841e0 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -108,19 +108,19 @@ 
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition at qspi-fsbl-uboot { /* for testing purpose */
+		partition at 0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition at qspi-linux { /* for testing purpose */
+		partition at 10000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition at qspi-device-tree { /* for testing purpose */
+		partition at 600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition at qspi-rootfs { /* for testing purpose */
+		partition at 620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
index 6655b86a8029..e22947ef326f 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
@@ -187,19 +187,19 @@ 
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition at qspi-fsbl-uboot { /* for testing purpose */
+		partition at 0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition at qspi-linux { /* for testing purpose */
+		partition at 10000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition at qspi-device-tree { /* for testing purpose */
+		partition at 600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition at qspi-rootfs { /* for testing purpose */
+		partition at 620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index fd6dfdd3c225..620ef81a979b 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -614,19 +614,19 @@ 
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition at qspi-fsbl-uboot { /* for testing purpose */
+		partition at 0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition at qspi-linux { /* for testing purpose */
+		partition at 10000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition at qspi-device-tree { /* for testing purpose */
+		partition at 600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition at qspi-rootfs { /* for testing purpose */
+		partition at 620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index 6375b47ff859..5172cfdcb141 100644
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -209,19 +209,19 @@ 
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition at qspi-fsbl-uboot { /* for testing purpose */
+		partition at 0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition at qspi-linux { /* for testing purpose */
+		partition at 10000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition at qspi-device-tree { /* for testing purpose */
+		partition at 600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition at qspi-rootfs { /* for testing purpose */
+		partition at 620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index 425d7605bf5c..0d18bacd0c3e 100644
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -222,19 +222,19 @@ 
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition at qspi-fsbl-uboot { /* for testing purpose */
+		partition at 0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition at qspi-linux { /* for testing purpose */
+		partition at 10000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition at qspi-device-tree { /* for testing purpose */
+		partition at 600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition at qspi-rootfs { /* for testing purpose */
+		partition at 620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index a5c4309f2f39..6b8d55c053b3 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -612,19 +612,19 @@ 
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition at qspi-fsbl-uboot { /* for testing purpose */
+		partition at 0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition at qspi-linux { /* for testing purpose */
+		partition at 10000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition at qspi-device-tree { /* for testing purpose */
+		partition at 600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition at qspi-rootfs { /* for testing purpose */
+		partition at 620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 755c30e9ff67..56cf60767fdd 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -525,19 +525,19 @@ 
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition at qspi-fsbl-uboot { /* for testing purpose */
+		partition at 0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition at qspi-linux { /* for testing purpose */
+		partition at 10000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition at qspi-device-tree { /* for testing purpose */
+		partition at 600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition at qspi-rootfs { /* for testing purpose */
+		partition at 620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu1275-revA.dts b/arch/arm/dts/zynqmp-zcu1275-revA.dts
index 8755bc433b4f..d0322add3bbb 100644
--- a/arch/arm/dts/zynqmp-zcu1275-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu1275-revA.dts
@@ -49,19 +49,19 @@ 
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition at qspi-fsbl-uboot { /* for testing purpose */
+		partition at 0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition at qspi-linux { /* for testing purpose */
+		partition at 10000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition at qspi-device-tree { /* for testing purpose */
+		partition at 600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition at qspi-rootfs { /* for testing purpose */
+		partition at 620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu1275-revB.dts b/arch/arm/dts/zynqmp-zcu1275-revB.dts
index 16f609c7e5c0..b5be749ee644 100644
--- a/arch/arm/dts/zynqmp-zcu1275-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu1275-revB.dts
@@ -50,19 +50,19 @@ 
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition at qspi-fsbl-uboot { /* for testing purpose */
+		partition at 0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition at qspi-linux { /* for testing purpose */
+		partition at 10000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition at qspi-device-tree { /* for testing purpose */
+		partition at 600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition at qspi-rootfs { /* for testing purpose */
+		partition at 620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};