From patchwork Mon May 28 17:47:49 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 137107 Delivered-To: patch@linaro.org Received: by 2002:a2e:9706:0:0:0:0:0 with SMTP id r6-v6csp3103855lji; Mon, 28 May 2018 10:51:43 -0700 (PDT) X-Google-Smtp-Source: ADUXVKJUd6LiiKii6u8V4w+yYxP5bp5z39R1XWZccTq4bB1cIKYivpKgiTrjb3y+ZEVYOY7B8yMT X-Received: by 2002:a62:a0c:: with SMTP id s12-v6mr9797963pfi.33.1527529903213; Mon, 28 May 2018 10:51:43 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1527529903; cv=none; d=google.com; s=arc-20160816; b=ppZ/zY/i+izh1njv/vSgcdRPP0glT9YkjUjw6yluIQXBmVC1O8Ya4+2Vfd9blwudwR Wm2hRWaRMPbmt3Au53EN1Cjuda2EAHuRsAKsqQflLH8LrcYjBjIjAXl/SmV2cfQq+OiR qchC/dlfFb37CH1MjnUVsazf/ZD3alo4rFvQbX7OKRWMlhwazfgnZGlJG9bQi8v55G2l gLDA8sIbV4tbeeRgqxmGyUixLPdyiRqRHNRnRCMgC32nprVKvD/4zG3Yc9u7lt3CNSJH o0r/FV+PxYmQe27/fTAUZRqg8kgX+JyOWWA/L0sntMXP3lG0SQYGZUXL/TLuH3aYsk6Z CHbQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature:arc-authentication-results; bh=LNix/pWXG4cyMYYMCB5RmL4+QAwfG2Xg+mq/FukztZs=; b=LYKuCZCgkIcsQQeIuo8bMD5OZIdUM2KIx2FxEn9GrLenDEZnOpO2+pKFOjmR2nOohN 4eR/6E31AqQ4tB/e7oxX9D7qL7uNW+X4MtNoiyRny9ltmrV1iIeLszyBan7QRxv7Q96e jNvQkV+m6EfZtOf6+fQJfGWEpGmk/BK3ZVoN7F+RDswh0XeoMGlxMw4q7qSFDWDOVY8n fTqtAS+SEQRXq2v7QATsHRoPG5GuiLKCOqHek8CHTNoqF01vKvY7d6FyzmezaLltTyMi on72FOVLwRZwQiT4h2CLaXTMAM/Qs6GGWdR3OSuRA2vA58pq51S1rz2FY1aL7ODkzqoA ecfg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=jOJwgk31; spf=pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=netdev-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id z19-v6si29994350plo.174.2018.05.28.10.51.43; Mon, 28 May 2018 10:51:43 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=jOJwgk31; spf=pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=netdev-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754601AbeE1Rvh (ORCPT + 9 others); Mon, 28 May 2018 13:51:37 -0400 Received: from mail-wr0-f196.google.com ([209.85.128.196]:44770 "EHLO mail-wr0-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754464AbeE1Rvg (ORCPT ); Mon, 28 May 2018 13:51:36 -0400 Received: by mail-wr0-f196.google.com with SMTP id y15-v6so21442238wrg.11 for ; Mon, 28 May 2018 10:51:35 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=LNix/pWXG4cyMYYMCB5RmL4+QAwfG2Xg+mq/FukztZs=; b=jOJwgk31IlSN6pU0HnOznH6Dx6RBWcBUaMR7FrJRonDFEw7vAAZDkWR1uk1CcWaAFN B7D/7+KU22zFkKHDytARSRqmdyzokWNHzYm2J3IDBdIrvN6k4DTeRXjo2yTkxV50/FKY fpf6mOzRTxieiMgSS+mnB37VYiwixDGCaYbUk= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=LNix/pWXG4cyMYYMCB5RmL4+QAwfG2Xg+mq/FukztZs=; b=fphH5wq7yVuJMP90N9BYiTGQga85EtPTeAUIKgyTJv8OwGWrp/Ycg9JLr9zpg1i3WK 45T/gvxFt6v8HL7t4Jy1Ksp9JeyPr2WxsZWh1TmoPgwbQnO6xn6HrYamyZpc+OYI1WHx M5qwaou3BZJ2dnx86Qljx2rZyn6lYkA5Q9dftA/3BrgXGqJlUT3lYM83iQyASdJ3nsLc lhpHWcsQIcNEzjyzaYrejF1lF/rut7rPkxmXIZsc/Nz8Go2ai6yGwL2G1c2LsJxOp1jR JGfWTb9LrFfC2VAvlTbXZMeeg7ox3yB085jp3MyuMi4Yqt4X6sr+2t4BuJWVjOq3nP8Y MhKw== X-Gm-Message-State: ALKqPwc2RAtLLqutM0XltVwVHNJsdb7Uz4AArVdNzuJxsdroQsl2OL27 X69D9TryiAg8TcuvIjB45/HeVw== X-Received: by 2002:a19:c90d:: with SMTP id z13-v6mr5670860lff.0.1527529895182; Mon, 28 May 2018 10:51:35 -0700 (PDT) Received: from localhost.localdomain (c-ae7b71d5.014-348-6c756e10.bbcust.telenor.se. [213.113.123.174]) by smtp.gmail.com with ESMTPSA id p76-v6sm6913861lfp.44.2018.05.28.10.51.32 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Mon, 28 May 2018 10:51:33 -0700 (PDT) From: Linus Walleij To: Andrew Lunn , Vivien Didelot , Florian Fainelli Cc: netdev@vger.kernel.org, openwrt-devel@lists.openwrt.org, LEDE Development List , Linus Walleij , =?utf-8?b?QW50dGkgU2VwcMOkbMOk?= , Roman Yeryomin , Colin Leitner , Gabor Juhos Subject: [PATCH 1/4 RFCv2] net: phy: realtek: Support RTL8366RB variant Date: Mon, 28 May 2018 19:47:49 +0200 Message-Id: <20180528174752.6806-2-linus.walleij@linaro.org> X-Mailer: git-send-email 2.17.0 In-Reply-To: <20180528174752.6806-1-linus.walleij@linaro.org> References: <20180528174752.6806-1-linus.walleij@linaro.org> MIME-Version: 1.0 Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org The RTL8366RB is an ASIC with five internal PHYs for LAN0..LAN3 and WAN. The PHYs are spawn off the main device so they can be handled in a distributed manner by the Realtek PHY driver. All that is really needed is the power save feature enablement and letting the PHY driver core pick up the IRQ from the switch chip. Cc: Antti Seppälä Cc: Roman Yeryomin Cc: Colin Leitner Cc: Gabor Juhos Cc: Florian Fainelli Signed-off-by: Linus Walleij --- ChangeLog RFCv1->RFCv2: - No real changes. --- drivers/net/phy/realtek.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) -- 2.17.0 diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 9f48ecf9c627..21624d1c9d38 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -37,6 +37,9 @@ #define RTL8201F_ISR 0x1e #define RTL8201F_IER 0x13 +#define RTL8366RB_POWER_SAVE 0x21 +#define RTL8366RB_POWER_SAVE_ON 0x1000 + MODULE_DESCRIPTION("Realtek PHY driver"); MODULE_AUTHOR("Johnson Leung"); MODULE_LICENSE("GPL"); @@ -145,6 +148,22 @@ static int rtl8211f_config_init(struct phy_device *phydev) return phy_modify_paged(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY, val); } +static int rtl8366rb_config_init(struct phy_device *phydev) +{ + int ret; + u16 reg; + + ret = genphy_config_init(phydev); + if (ret < 0) + return ret; + + reg = phy_read(phydev, RTL8366RB_POWER_SAVE); + reg |= RTL8366RB_POWER_SAVE_ON; + phy_write(phydev, RTL8366RB_POWER_SAVE, reg); + + return 0; +} + static struct phy_driver realtek_drvs[] = { { .phy_id = 0x00008201, @@ -207,6 +226,18 @@ static struct phy_driver realtek_drvs[] = { .resume = genphy_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, + }, { + /* The main part of this DSA is in drivers/net/dsa */ + .phy_id = 0x001cc961, + .name = "RTL8366RB Gigabit Ethernet", + .phy_id_mask = 0x001fffff, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .config_init = &rtl8366rb_config_init, + .read_status = &genphy_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, }, }; @@ -218,6 +249,7 @@ static struct mdio_device_id __maybe_unused realtek_tbl[] = { { 0x001cc914, 0x001fffff }, { 0x001cc915, 0x001fffff }, { 0x001cc916, 0x001fffff }, + { 0x001cc961, 0x001fffff }, { } }; From patchwork Mon May 28 17:47:51 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 137110 Delivered-To: patch@linaro.org Received: by 2002:a2e:9706:0:0:0:0:0 with SMTP id r6-v6csp3104018lji; Mon, 28 May 2018 10:51:53 -0700 (PDT) X-Google-Smtp-Source: AB8JxZpaH7InzU9rIidFaSNbHQdI6r1lx1vlh0unvIXdtPR/AafWi8lZ/JK9B56c3y6mjdyR3tcg X-Received: by 2002:a63:9f0a:: with SMTP id g10-v6mr11285068pge.39.1527529913644; Mon, 28 May 2018 10:51:53 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1527529913; cv=none; d=google.com; s=arc-20160816; b=C+zWeIBdrd6xqx/F8NJdYSTgcru9sKb3gsBOfAC1SyUAovWcR9OGfWA0CCpvVk2xOs s1NNOhQenGUKXEWqU7QDqEABZdCLrsIbdYMVIBz/4mBSwXSOANPOGIR6HWqX7oQ25DTT EpiX0acmMce2m8OErnMsDCymxHjbfkSfZXH2lXAan8NaZAUYY2O/Uc5OGPjihKcu1+Hp 5LSnC280rh1Su0IP3+1YJnHQL8kBHb4S2zZH1FwWbQ1vPmh8Wa8yYXj0UUHTF8tcuN5D R92rUj0/9Xv1wccRNv39mpV4Ydqs7IKoUAmxl6PfqfKcJqsSUS0VEZg3XSZP9HkSsmDH tv2A== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature:arc-authentication-results; bh=littECuH9Dlaub6KepZdx8LRD8RGad4jh/Uqb1g7z8E=; b=i1o0NEXE0g1ec4x6guXi28JEOh6icieL95eE0FachCkGheJLNU6c3zCRTzllltXTn7 x4lEyi3kB2/aH0Ts+tNHwNVcEJnP8gLNSzNzN7UghwrIZb6OfOGpoFj5+hldmrNkyP9O O8NXnSScoM87PlMVsvha4SQat+AHEGgakSQNIN+0TalPUZVXnd8+EvE/8TYPO2ueRZZA E6A0Imhznq0c2vzTHjXPfClNaxkTEkn6xw9+aCtsshsJFA1GKqb99KFvNVSRxc+O2unB Zn2LpJmRfxuTJDrfqVITe7lSdHBoZQtHa5T3/T7pN67WtnxCXiUIKDcRPxZSqaU5ZaNd 32ZQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=gqfYrFLb; spf=pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=netdev-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id f1-v6si30508755pld.3.2018.05.28.10.51.53; Mon, 28 May 2018 10:51:53 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=gqfYrFLb; spf=pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=netdev-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755603AbeE1Rvu (ORCPT + 9 others); Mon, 28 May 2018 13:51:50 -0400 Received: from mail-wm0-f68.google.com ([74.125.82.68]:54947 "EHLO mail-wm0-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754968AbeE1Rvp (ORCPT ); Mon, 28 May 2018 13:51:45 -0400 Received: by mail-wm0-f68.google.com with SMTP id f6-v6so33969561wmc.4 for ; Mon, 28 May 2018 10:51:44 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=littECuH9Dlaub6KepZdx8LRD8RGad4jh/Uqb1g7z8E=; b=gqfYrFLbMw1JKJYp6mZMM+PiLG+qdbJ9XNCwdjMWtgpej5SuRSfHPNNP5798VjwzCG ZKcnBU9l2zBITAUyPif4DNVCsi1UQMx6k00WkydiIlZcIJly+bxl/OdB2qF5jEoDyD2s Y9UQ/z5zW+F1+qD2FTj0Esc4ZQ96EYerlimDM= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=littECuH9Dlaub6KepZdx8LRD8RGad4jh/Uqb1g7z8E=; b=iadXMlMtLal4FKsxXYG8YAZlqRZWAqlzGcHM4Omk//HfAIB5eHe0qa6+egy+P2CG0O NnhwADX6mQTJgxxwiBq0zgj6in1MbZLD2Fwe+nfwmpkswNcJyNo2aopUDiE8Q21bYolI KbUNJVkLNcnrs2chzkVYa8IoSs+G2uCrvP2nxqgF4e9SLzAhIINqGSNs9pvE96TTDfmC +JdTRyR2D+VaZb1e5fLl0nl+ZlTMAG5U16BavV37AJ3WGuFaNIgZN3LmAvo34rZXU9wM U6WaB6rH8wQCXl/0YSFq5X7ZYy63ARltlgEi4WvNk0GTJfTBYPv8G1YOV1tDBWGQXUKr Iv6A== X-Gm-Message-State: ALKqPwf0PIspgeygiFzAgjj4gawFLM1gFqJ944iIfkr9Qf6xVajzCXH0 LLgsRTT9M5ARrhGAp7ow5/zLtg== X-Received: by 2002:a2e:997:: with SMTP id 145-v6mr8820488ljj.46.1527529903316; Mon, 28 May 2018 10:51:43 -0700 (PDT) Received: from localhost.localdomain (c-ae7b71d5.014-348-6c756e10.bbcust.telenor.se. [213.113.123.174]) by smtp.gmail.com with ESMTPSA id p76-v6sm6913861lfp.44.2018.05.28.10.51.40 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Mon, 28 May 2018 10:51:41 -0700 (PDT) From: Linus Walleij To: Andrew Lunn , Vivien Didelot , Florian Fainelli Cc: netdev@vger.kernel.org, openwrt-devel@lists.openwrt.org, LEDE Development List , Linus Walleij , =?utf-8?b?QW50dGkgU2VwcMOkbMOk?= , Roman Yeryomin , Colin Leitner , Gabor Juhos Subject: [PATCH 3/4 RFCv2] net: dsa: realtek-smi: Add Realtek SMI driver Date: Mon, 28 May 2018 19:47:51 +0200 Message-Id: <20180528174752.6806-4-linus.walleij@linaro.org> X-Mailer: git-send-email 2.17.0 In-Reply-To: <20180528174752.6806-1-linus.walleij@linaro.org> References: <20180528174752.6806-1-linus.walleij@linaro.org> MIME-Version: 1.0 Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org This adds a driver core for the Realtek SMI chips and a subdriver for the RTL8366RB. I just added this chip simply because it is all I can test. The code is a massaged variant of the code that has been sitting out-of-tree in OpenWRT for years in the absence of a proper switch subsystem. I have tried to credit the original authors wherever possible. The main changes I've done from the OpenWRT code: - Added a callback to set the MAC address. - Added an IRQ chip inside the RTL8366RB switch to demux and handle the line state IRQs. - Distributed the phy handling out to the PHY driver. - Added some RTL8366RB code that was missing in the driver at the time, such as setting up "green ethernet" with a funny jam table and forcing MAC5 (the CPU port) into 1 GBit. - Select jam table and add the default jam table from the vendor driver, also for ASIC "version 0" if need be. - Do not store jam tables in the device tree, store them in the driver. - Pick in the "initvals" jam tables from OpenWRT's driver and make those get selected per compatible for the whole system. It's apparently about electrical settings for this system and whatnot, not really configuration from device tree. Cc: Antti Seppälä Cc: Roman Yeryomin Cc: Colin Leitner Cc: Gabor Juhos Cc: Florian Fainelli Signed-off-by: Linus Walleij --- ChangeLog RFCv1->RFCv2: - Create the internal MDIO bus from the new MDIO node in the device tree - Support disabling all LEDs and LED setup - Run the per-device "jam tables" to set up registers to initial predictable states. - Fix a bunch of warnings from the static checkers that picked up the RFC patch for test immediately --- drivers/net/dsa/Kconfig | 12 + drivers/net/dsa/Makefile | 2 + drivers/net/dsa/realtek-smi.c | 488 ++++++++++++ drivers/net/dsa/realtek-smi.h | 146 ++++ drivers/net/dsa/rtl8366.c | 524 ++++++++++++ drivers/net/dsa/rtl8366rb.c | 1411 +++++++++++++++++++++++++++++++++ drivers/net/phy/realtek.c | 1 + 7 files changed, 2584 insertions(+) create mode 100644 drivers/net/dsa/realtek-smi.c create mode 100644 drivers/net/dsa/realtek-smi.h create mode 100644 drivers/net/dsa/rtl8366.c create mode 100644 drivers/net/dsa/rtl8366rb.c -- 2.17.0 diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index 2b81b97e994f..a8a10a288939 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -52,6 +52,18 @@ config NET_DSA_QCA8K This enables support for the Qualcomm Atheros QCA8K Ethernet switch chips. +config NET_DSA_RTK_SMI + tristate "Realtek SMI Ethernet switch family support" + depends on NET_DSA + # FIXME: select NET_DSA_TAG_RTK + select FIXED_PHY + select IRQ_DOMAIN + select REALTEK_PHY + select NET_DSA_TAG_TRAILER + ---help--- + This enables support for the Realtek SMI-based switch + chips, currently only RTL8366RB. + config NET_DSA_SMSC_LAN9303 tristate select NET_DSA_TAG_LAN9303 diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index 15c2a831edf1..0582a57e1545 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -8,6 +8,8 @@ endif obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o +obj-$(CONFIG_NET_DSA_RTK_SMI) += realtek.o +realtek-objs := realtek-smi.o rtl8366.o rtl8366rb.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o diff --git a/drivers/net/dsa/realtek-smi.c b/drivers/net/dsa/realtek-smi.c new file mode 100644 index 000000000000..2c9d23cf7423 --- /dev/null +++ b/drivers/net/dsa/realtek-smi.c @@ -0,0 +1,488 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Realtek Simple Management Interface (SMI) driver + * It can be discussed how "simple" this interface is. + * + * The SMI protocol piggy-backs the MDIO MDC and MDIO signals levels + * but the protocol is not MDIO at all. Instead it is a Realtek + * pecularity that need to bit-bang the lines in a special way to + * communicate with the switch. + * + * ASICs we intend to support with this driver: + * + * RTL8366 - The original version, apparently + * RTL8369 - Similar enough to have the same datsheet as RTL8366 + * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite + * different register layout from the other two + * RTL8366S - Is this "RTL8366 super"? + * RTL8367 - Has an OpenWRT driver as well + * RTL8368S - Seems to be an alternative name for RTL8366RB + * RTL8370 - Also uses SMI + * + * Copyright (C) 2017 Linus Walleij + * Copyright (C) 2010 Antti Seppälä + * Copyright (C) 2010 Roman Yeryomin + * Copyright (C) 2011 Colin Leitner + * Copyright (C) 2009-2010 Gabor Juhos + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "realtek-smi.h" + +#define REALTEK_SMI_ACK_RETRY_COUNT 5 +#define REALTEK_SMI_HW_STOP_DELAY 25 /* msecs */ +#define REALTEK_SMI_HW_START_DELAY 100 /* msecs */ + +static inline void realtek_smi_clk_delay(struct realtek_smi *smi) +{ + ndelay(smi->clk_delay); +} + +static void realtek_smi_start(struct realtek_smi *smi) +{ + /* + * Set GPIO pins to output mode, with initial state: + * SCK = 0, SDA = 1 + */ + gpiod_direction_output(smi->mdc, 0); + gpiod_direction_output(smi->mdio, 1); + realtek_smi_clk_delay(smi); + + /* CLK 1: 0 -> 1, 1 -> 0 */ + gpiod_set_value(smi->mdc, 1); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 0); + realtek_smi_clk_delay(smi); + + /* CLK 2: */ + gpiod_set_value(smi->mdc, 1); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdio, 0); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 0); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdio, 1); +} + +static void realtek_smi_stop(struct realtek_smi *smi) +{ + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdio, 0); + gpiod_set_value(smi->mdc, 1); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdio, 1); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 1); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 0); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 1); + + /* add a click */ + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 0); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 1); + + /* set GPIO pins to input mode */ + gpiod_direction_input(smi->mdio); + gpiod_direction_input(smi->mdc); +} + +static void realtek_smi_write_bits(struct realtek_smi *smi, u32 data, u32 len) +{ + for (; len > 0; len--) { + realtek_smi_clk_delay(smi); + + /* prepare data */ + gpiod_set_value(smi->mdio, !!(data & ( 1 << (len - 1)))); + realtek_smi_clk_delay(smi); + + /* clocking */ + gpiod_set_value(smi->mdc, 1); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 0); + } +} + +static void realtek_smi_read_bits(struct realtek_smi *smi, u32 len, u32 *data) +{ + gpiod_direction_input(smi->mdio); + + for (*data = 0; len > 0; len--) { + u32 u; + + realtek_smi_clk_delay(smi); + + /* clocking */ + gpiod_set_value(smi->mdc, 1); + realtek_smi_clk_delay(smi); + u = !!gpiod_get_value(smi->mdio); + gpiod_set_value(smi->mdc, 0); + + *data |= (u << (len - 1)); + } + + gpiod_direction_output(smi->mdio, 0); +} + +static int realtek_smi_wait_for_ack(struct realtek_smi *smi) +{ + int retry_cnt; + + retry_cnt = 0; + do { + u32 ack; + + realtek_smi_read_bits(smi, 1, &ack); + if (ack == 0) + break; + + if (++retry_cnt > REALTEK_SMI_ACK_RETRY_COUNT) { + dev_err(smi->dev, "ACK timeout\n"); + return -ETIMEDOUT; + } + } while (1); + + return 0; +} + +static int realtek_smi_write_byte(struct realtek_smi *smi, u8 data) +{ + realtek_smi_write_bits(smi, data, 8); + return realtek_smi_wait_for_ack(smi); +} + +static int realtek_smi_write_byte_noack(struct realtek_smi *smi, u8 data) +{ + realtek_smi_write_bits(smi, data, 8); + return 0; +} + +static int realtek_smi_read_byte0(struct realtek_smi *smi, u8 *data) +{ + u32 t; + + /* read data */ + realtek_smi_read_bits(smi, 8, &t); + *data = (t & 0xff); + + /* send an ACK */ + realtek_smi_write_bits(smi, 0x00, 1); + + return 0; +} + +static int realtek_smi_read_byte1(struct realtek_smi *smi, u8 *data) +{ + u32 t; + + /* read data */ + realtek_smi_read_bits(smi, 8, &t); + *data = (t & 0xff); + + /* send an ACK */ + realtek_smi_write_bits(smi, 0x01, 1); + + return 0; +} + +static int realtek_smi_read_reg(struct realtek_smi *smi, u32 addr, u32 *data) +{ + unsigned long flags; + u8 lo = 0; + u8 hi = 0; + int ret; + + spin_lock_irqsave(&smi->lock, flags); + + realtek_smi_start(smi); + + /* send READ command */ + ret = realtek_smi_write_byte(smi, smi->cmd_read); + if (ret) + goto out; + + /* set ADDR[7:0] */ + ret = realtek_smi_write_byte(smi, addr & 0xff); + if (ret) + goto out; + + /* set ADDR[15:8] */ + ret = realtek_smi_write_byte(smi, addr >> 8); + if (ret) + goto out; + + /* read DATA[7:0] */ + realtek_smi_read_byte0(smi, &lo); + /* read DATA[15:8] */ + realtek_smi_read_byte1(smi, &hi); + + *data = ((u32) lo) | (((u32) hi) << 8); + + ret = 0; + + out: + realtek_smi_stop(smi); + spin_unlock_irqrestore(&smi->lock, flags); + + return ret; +} + +static int realtek_smi_write_reg(struct realtek_smi *smi, + u32 addr, u32 data, bool ack) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&smi->lock, flags); + + realtek_smi_start(smi); + + /* send WRITE command */ + ret = realtek_smi_write_byte(smi, smi->cmd_write); + if (ret) + goto out; + + /* set ADDR[7:0] */ + ret = realtek_smi_write_byte(smi, addr & 0xff); + if (ret) + goto out; + + /* set ADDR[15:8] */ + ret = realtek_smi_write_byte(smi, addr >> 8); + if (ret) + goto out; + + /* write DATA[7:0] */ + ret = realtek_smi_write_byte(smi, data & 0xff); + if (ret) + goto out; + + /* write DATA[15:8] */ + if (ack) + ret = realtek_smi_write_byte(smi, data >> 8); + else + ret = realtek_smi_write_byte_noack(smi, data >> 8); + if (ret) + goto out; + + ret = 0; + + out: + realtek_smi_stop(smi); + spin_unlock_irqrestore(&smi->lock, flags); + + return ret; +} + +/* + * There is one single case when we need to use this accessor and that + * is when issueing soft reset. Since the device reset as soon as we write + * that bit, no ACK will come back for natural reasons. + */ +int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr, + u32 data) +{ + return realtek_smi_write_reg(smi, addr, data, false); +} +EXPORT_SYMBOL_GPL(realtek_smi_write_reg_noack); + +/* Regmap accessors */ + +static int realtek_smi_write(void *ctx, u32 reg, u32 val) +{ + struct realtek_smi *smi = ctx; + + return realtek_smi_write_reg(smi, reg, val, true); +} + +static int realtek_smi_read(void *ctx, u32 reg, u32 *val) +{ + struct realtek_smi *smi = ctx; + + return realtek_smi_read_reg(smi, reg, val); +} + +static const struct regmap_config realtek_smi_mdio_regmap_config = { + .reg_bits = 10, /* A4..A0 R4..R0 */ + .val_bits = 16, + .reg_stride = 1, + /* phy regs are at 0x8000 */ + .max_register = 0xffff, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .reg_read = realtek_smi_read, + .reg_write = realtek_smi_write, + .cache_type = REGCACHE_NONE, +}; + +static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct realtek_smi *smi = bus->priv; + + return smi->ops->phy_read(smi, addr, regnum); +} + +static int realtek_smi_mdio_write(struct mii_bus *bus, int addr, int regnum, + u16 val) +{ + struct realtek_smi *smi = bus->priv; + + return smi->ops->phy_write(smi, addr, regnum, val); +} + +int realtek_smi_setup_mdio(struct realtek_smi *smi) +{ + struct device_node *mdio_np; + int ret; + + mdio_np = of_find_compatible_node(smi->dev->of_node, NULL, + "realtek,smi-mdio"); + if (!mdio_np) { + dev_err(smi->dev, "no MDIO bus node\n"); + return -ENODEV; + } + + smi->slave_mii_bus = devm_mdiobus_alloc(smi->dev); + if (!smi->slave_mii_bus) + return -ENOMEM; + smi->slave_mii_bus->priv = smi; + smi->slave_mii_bus->name = "SMI slave MII"; + smi->slave_mii_bus->read = realtek_smi_mdio_read; + smi->slave_mii_bus->write = realtek_smi_mdio_write; + snprintf(smi->slave_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d", + smi->ds->index); + smi->slave_mii_bus->dev.of_node = mdio_np; + smi->slave_mii_bus->parent = smi->dev; + smi->ds->slave_mii_bus = smi->slave_mii_bus; + //smi->ds->phys_mii_mask = priv->indir_phy_mask; + + ret = of_mdiobus_register(smi->slave_mii_bus, mdio_np); + if (ret) { + dev_err(smi->dev, "unable to register MDIO bus %s\n", + smi->slave_mii_bus->id); + of_node_put(mdio_np); + } + + return 0; +} + +static int realtek_smi_probe(struct platform_device *pdev) +{ + struct realtek_smi *smi; + struct device *dev = &pdev->dev; + const struct realtek_smi_variant *var = of_device_get_match_data(dev); + struct device_node *np = dev->of_node; + int ret; + + smi = devm_kzalloc(dev, sizeof(*smi), GFP_KERNEL); + if (!smi) + return -ENOMEM; + smi->map = devm_regmap_init(dev, NULL, smi, + &realtek_smi_mdio_regmap_config); + if (IS_ERR(smi->map)) { + ret = PTR_ERR(smi->map); + dev_err(dev, "regmap init failed: %d\n", ret); + return ret; + } + + /* link forward and backward */ + smi->dev = dev; + smi->clk_delay = var->clk_delay; + smi->cmd_read = var->cmd_read; + smi->cmd_write = var->cmd_write; + smi->ops = var->ops; + + dev_set_drvdata(dev, smi); + spin_lock_init(&smi->lock); + + /* TODO: if power is software controlled, set up any regulators here */ + + /* Assert then deassert RESET */ + smi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(smi->reset)) { + dev_err(dev, "failed to get RESET GPIO\n"); + return PTR_ERR(smi->reset); + } + msleep(REALTEK_SMI_HW_STOP_DELAY); + gpiod_set_value(smi->reset, 0); + msleep(REALTEK_SMI_HW_START_DELAY); + dev_info(dev, "deasserted RESET\n"); + + /* Fetch MDIO pins */ + smi->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW); + if (IS_ERR(smi->mdc)) + return PTR_ERR(smi->mdc); + smi->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW); + if (IS_ERR(smi->mdio)) + return PTR_ERR(smi->mdio); + + smi->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); + + ret = smi->ops->detect(smi); + if (ret) { + dev_err(dev, "unable to detect switch\n"); + return ret; + } + + smi->ds = dsa_switch_alloc(dev, smi->num_ports); + if (!smi->ds) + return -ENOMEM; + smi->ds->priv = smi; + + smi->ds->ops = var->ds_ops; + ret = dsa_register_switch(smi->ds); + if (ret) { + dev_err(dev, "unable to register switch ret = %d\n", ret); + return ret; + } + return 0; +} + +static int realtek_smi_remove(struct platform_device *pdev) +{ + struct realtek_smi *smi = dev_get_drvdata(&pdev->dev); + + dsa_unregister_switch(smi->ds); + gpiod_set_value(smi->reset, 1); + + return 0; +} + +static const struct of_device_id realtek_smi_of_match[] = { + { + .compatible = "realtek,rtl8366rb", + .data = &rtl8366rb_variant, + }, + { + /* FIXME: add support for RTL8366S and more */ + .compatible = "realtek,rtl8366s", + .data = NULL, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, realtek_smi_of_match); + +static struct platform_driver realtek_smi_driver = { + .driver = { + .name = "realtek-smi", + .of_match_table = of_match_ptr(realtek_smi_of_match), + }, + .probe = realtek_smi_probe, + .remove = realtek_smi_remove, +}; +module_platform_driver(realtek_smi_driver); diff --git a/drivers/net/dsa/realtek-smi.h b/drivers/net/dsa/realtek-smi.h new file mode 100644 index 000000000000..7268c3036992 --- /dev/null +++ b/drivers/net/dsa/realtek-smi.h @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Realtek SMI interface driver defines + * + * Copyright (C) 2017 Linus Walleij + * Copyright (C) 2009-2010 Gabor Juhos + */ + +#ifndef _REALTEK_SMI_H +#define _REALTEK_SMI_H + +#include +#include +#include +#include + +struct realtek_smi_ops; +struct dentry; +struct inode; +struct file; + +struct rtl8366_mib_counter { + unsigned base; + unsigned offset; + unsigned length; + const char *name; +}; + +struct rtl8366_vlan_mc { + u16 vid; + u16 untag; + u16 member; + u8 fid; + u8 priority; +}; + +struct rtl8366_vlan_4k { + u16 vid; + u16 untag; + u16 member; + u8 fid; +}; + +struct realtek_smi { + struct device *dev; + struct gpio_desc *reset; + struct gpio_desc *mdc; + struct gpio_desc *mdio; + struct regmap *map; + struct mii_bus *slave_mii_bus; + + unsigned int clk_delay; + u8 cmd_read; + u8 cmd_write; + spinlock_t lock; + struct dsa_switch *ds; + struct irq_domain *irqdomain; + bool leds_disabled; + + unsigned int cpu_port; + unsigned int num_ports; + unsigned int num_vlan_mc; + unsigned int num_mib_counters; + struct rtl8366_mib_counter *mib_counters; + + const struct realtek_smi_ops *ops; + + int vlan_enabled; + int vlan4k_enabled; + + char buf[4096]; +#ifdef CONFIG_RTL8366_SMI_DEBUG_FS + struct dentry *debugfs_root; + u8 dbg_vlan_4k_page; +#endif +}; + +/** + * struct realtek_smi_ops - vtable for the per-SMI-chiptype operations + * @detect: detects the chiptype + */ +struct realtek_smi_ops { + int (*detect)(struct realtek_smi *smi); + int (*reset_chip)(struct realtek_smi *smi); + int (*setup)(struct realtek_smi *smi); + void (*cleanup)(struct realtek_smi *smi); + int (*get_mib_counter)(struct realtek_smi *smi, + int port, + struct rtl8366_mib_counter *mib, + u64 *mibvalue); + int (*get_vlan_mc)(struct realtek_smi *smi, u32 index, + struct rtl8366_vlan_mc *vlanmc); + int (*set_vlan_mc)(struct realtek_smi *smi, u32 index, + const struct rtl8366_vlan_mc *vlanmc); + int (*get_vlan_4k)(struct realtek_smi *smi, u32 vid, + struct rtl8366_vlan_4k *vlan4k); + int (*set_vlan_4k)(struct realtek_smi *smi, + const struct rtl8366_vlan_4k *vlan4k); + int (*get_mc_index)(struct realtek_smi *smi, int port, int *val); + int (*set_mc_index)(struct realtek_smi *smi, int port, int index); + bool (*is_vlan_valid)(struct realtek_smi *smi, unsigned vlan); + int (*enable_vlan)(struct realtek_smi *smi, bool enable); + int (*enable_vlan4k)(struct realtek_smi *smi, bool enable); + int (*enable_port)(struct realtek_smi *smi, int port, bool enable); + int (*phy_read)(struct realtek_smi *smi, int phy, int regnum); + int (*phy_write)(struct realtek_smi *smi, int phy, int regnum, u16 val); +}; + +struct realtek_smi_variant { + const struct dsa_switch_ops *ds_ops; + const struct realtek_smi_ops *ops; + unsigned int clk_delay; + u8 cmd_read; + u8 cmd_write; +}; + +/* SMI core calls */ +int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr, + u32 data); +int realtek_smi_setup_mdio(struct realtek_smi *smi); + +/* RTL8366 library helpers */ +int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used); +int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member, + u32 untag, u32 fid); +int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val); +int rtl8366_set_pvid(struct realtek_smi *smi, unsigned port, + unsigned vid); +int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable); +int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable); +int rtl8366_reset_vlan(struct realtek_smi *smi); +int rtl8366_init_vlan(struct realtek_smi *smi); +int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering); +int rtl8366_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan); +void rtl8366_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan); +int rtl8366_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan); +void rtl8366_get_strings(struct dsa_switch *ds, int port, uint8_t *data); +int rtl8366_get_sset_count(struct dsa_switch *ds, int port); +void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data); + +extern const struct realtek_smi_variant rtl8366rb_variant; + +#endif /* _REALTEK_SMI_H */ diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c new file mode 100644 index 000000000000..ba5e630d451b --- /dev/null +++ b/drivers/net/dsa/rtl8366.c @@ -0,0 +1,524 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Realtek SMI library helpers for the RTL8366x variants + * RTL8366RB and RTL8366S + * + * Copyright (C) 2017 Linus Walleij + * Copyright (C) 2009-2010 Gabor Juhos + * Copyright (C) 2010 Antti Seppälä + * Copyright (C) 2010 Roman Yeryomin + * Copyright (C) 2011 Colin Leitner + */ + +#include +#include +#include "realtek-smi.h" + +int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used) +{ + int ret; + int i; + + *used = 0; + for (i = 0; i < smi->num_ports; i++) { + int index = 0; + + ret = smi->ops->get_mc_index(smi, i, &index); + if (ret) + return ret; + + if (mc_index == index) { + *used = 1; + break; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_mc_is_used); + +int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member, + u32 untag, u32 fid) +{ + struct rtl8366_vlan_4k vlan4k; + int ret; + int i; + + /* Update the 4K table */ + ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); + if (ret) + return ret; + + vlan4k.member = member; + vlan4k.untag = untag; + vlan4k.fid = fid; + ret = smi->ops->set_vlan_4k(smi, &vlan4k); + if (ret) + return ret; + + /* Try to find an existing MC entry for this VID */ + for (i = 0; i < smi->num_vlan_mc; i++) { + struct rtl8366_vlan_mc vlanmc; + + ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + if (vid == vlanmc.vid) { + /* update the MC entry */ + vlanmc.member = member; + vlanmc.untag = untag; + vlanmc.fid = fid; + + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + break; + } + } + + return ret; +} +EXPORT_SYMBOL_GPL(rtl8366_set_vlan); + +int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val) +{ + struct rtl8366_vlan_mc vlanmc; + int ret; + int index; + + ret = smi->ops->get_mc_index(smi, port, &index); + if (ret) + return ret; + + ret = smi->ops->get_vlan_mc(smi, index, &vlanmc); + if (ret) + return ret; + + *val = vlanmc.vid; + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_get_pvid); + +int rtl8366_set_pvid(struct realtek_smi *smi, unsigned port, + unsigned vid) +{ + struct rtl8366_vlan_mc vlanmc; + struct rtl8366_vlan_4k vlan4k; + int ret; + int i; + + /* Try to find an existing MC entry for this VID */ + for (i = 0; i < smi->num_vlan_mc; i++) { + ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + if (vid == vlanmc.vid) { + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + ret = smi->ops->set_mc_index(smi, port, i); + return ret; + } + } + + /* We have no MC entry for this VID, try to find an empty one */ + for (i = 0; i < smi->num_vlan_mc; i++) { + ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + if (vlanmc.vid == 0 && vlanmc.member == 0) { + /* Update the entry from the 4K table */ + ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); + if (ret) + return ret; + + vlanmc.vid = vid; + vlanmc.member = vlan4k.member; + vlanmc.untag = vlan4k.untag; + vlanmc.fid = vlan4k.fid; + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + ret = smi->ops->set_mc_index(smi, port, i); + return ret; + } + } + + /* MC table is full, try to find an unused entry and replace it */ + for (i = 0; i < smi->num_vlan_mc; i++) { + int used; + + ret = rtl8366_mc_is_used(smi, i, &used); + if (ret) + return ret; + + if (!used) { + /* Update the entry from the 4K table */ + ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); + if (ret) + return ret; + + vlanmc.vid = vid; + vlanmc.member = vlan4k.member; + vlanmc.untag = vlan4k.untag; + vlanmc.fid = vlan4k.fid; + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + ret = smi->ops->set_mc_index(smi, port, i); + return ret; + } + } + + dev_err(smi->dev, + "all VLAN member configurations are in use\n"); + + return -ENOSPC; +} +EXPORT_SYMBOL_GPL(rtl8366_set_pvid); + +int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable) +{ + int ret; + + /* + * To enable 4k VLAN, ordinary VLAN must be enabled first, + * but if we disable 4k VLAN it is fine to leave ordinary + * VLAN enabled. + */ + if (enable) { + /* Make sure VLAN is ON */ + ret = smi->ops->enable_vlan(smi, true); + if (ret) + return ret; + + smi->vlan_enabled = true; + } + + ret = smi->ops->enable_vlan4k(smi, enable); + if (ret) + return ret; + + smi->vlan4k_enabled = enable; + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k); + +int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable) +{ + int ret; + + ret = smi->ops->enable_vlan(smi, enable); + if (ret) + return ret; + + smi->vlan_enabled = enable; + + /* + * If we turn VLAN off, make sure that we turn off + * 4k VLAN as well, if that happened to be on. + */ + if (!enable) { + smi->vlan4k_enabled = false; + ret = smi->ops->enable_vlan4k(smi, false); + } + + return ret; +} +EXPORT_SYMBOL_GPL(rtl8366_enable_vlan); + +int rtl8366_reset_vlan(struct realtek_smi *smi) +{ + struct rtl8366_vlan_mc vlanmc; + struct rtl8366_vlan_4k vlan4k; + int ret; + int i; + + rtl8366_enable_vlan(smi, false); + rtl8366_enable_vlan4k(smi, false); + + /* clear the 16 VLAN member configurations */ + vlanmc.vid = 0; + vlanmc.priority = 0; + vlanmc.member = 0; + vlanmc.untag = 0; + vlanmc.fid = 0; + for (i = 0; i < smi->num_vlan_mc; i++) { + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_reset_vlan); + +int rtl8366_init_vlan(struct realtek_smi *smi) +{ + int port; + int ret; + + ret = rtl8366_reset_vlan(smi); + if (ret) + return ret; + + /* + * Loop over the available ports, for each port, associate + * it with the VLAN (port+1) + */ + for (port = 0; port < smi->num_ports; port++) { + u32 mask; + + if (port == smi->cpu_port) + /* + * For the CPU port, make all ports members of this + * VLAN. + */ + mask = GENMASK(smi->num_ports - 1, 0); + else + /* + * For all other ports, enable itself plus the + * CPU port. + */ + mask = BIT(port) | BIT(smi->cpu_port); + + /* + * For each port, set the port as member of VLAN (port+1) + * and untagged, except for the CPU port: the CPU port (5) is + * member of VLAN 6 and so are ALL the other ports as well. + * Use filter 0 (no filter). + */ + dev_info(smi->dev, "VLAN%d port mask for port %d, %08x\n", (port + 1), + port, mask); + ret = rtl8366_set_vlan(smi, (port + 1), mask, mask, 0); + if (ret) + return ret; + + dev_info(smi->dev, "VLAN%d port %d, PVID set to %d\n", (port + 1), + port, (port + 1)); + ret = rtl8366_set_pvid(smi, port, (port + 1)); + if (ret) + return ret; + } + + return rtl8366_enable_vlan(smi, true); +} +EXPORT_SYMBOL_GPL(rtl8366_init_vlan); + +int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering) +{ + struct realtek_smi *smi = ds->priv; + struct rtl8366_vlan_4k vlan4k; + int ret; + + if (!smi->ops->is_vlan_valid(smi, port)) + return -EINVAL; + + dev_info(smi->dev, "%s filtering on port %d\n", + vlan_filtering ? "enable" : "disable", + port); + + /* + * FIXME: + * The hardware support filter ID (FID) 0..7, I have no clue how to + * support this in the driver when the callback only says on/off. + */ + ret = smi->ops->get_vlan_4k(smi, port, &vlan4k); + if (ret) + return ret; + + /* Just set the filter to FID 1 for now then */ + ret = rtl8366_set_vlan(smi, port, + vlan4k.member, + vlan4k.untag, + 1); + if (ret) + return ret; + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering); + +int rtl8366_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct realtek_smi *smi = ds->priv; + int ret; + + if (!smi->ops->is_vlan_valid(smi, port)) + return -EINVAL; + + dev_info(smi->dev, "prepare VLANs %04x..%04x\n", + vlan->vid_begin, vlan->vid_end); + + /* + * FIXME: what's with this 4k business? + * Just rtl8366_enable_vlan() seems inconclusive. + */ + + /* Enable VLAN in the hardware */ + ret = rtl8366_enable_vlan4k(smi, true); + if (ret) + return ret; + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_vlan_prepare); + +void rtl8366_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct realtek_smi *smi = ds->priv; + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; + u32 member = 0; + u32 untag = 0; + u16 vid; + int ret; + + if (!smi->ops->is_vlan_valid(smi, port)) + return; + + dev_info(smi->dev, "add VLAN on port %d, %s, %s\n", + port, + untagged ? "untagged" : "tagged", + pvid ? " PVID" : "no PVID"); + + if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port)) { + dev_err(smi->dev, "port is DSA or CPU port\n"); + } + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { + int pvid_val = 0; + + dev_info(smi->dev, "add VLAN %04x\n", vid); + member |= BIT(port); + + if (untagged) + untag |= BIT(port); + + /* + * To ensure that we have a valid MC entry for this VLAN, + * initialize the port VLAN ID here. + */ + ret = rtl8366_get_pvid(smi, port, &pvid_val); + if (ret < 0) { + dev_err(smi->dev, "could not lookup PVID for port %d\n", + port); + return; + } + if (pvid_val == 0) { + ret = rtl8366_set_pvid(smi, port, vid); + if (ret < 0) + return; + } + } + + ret = rtl8366_set_vlan(smi, port, member, untag, 0); + if (ret) + dev_err(smi->dev, + "failed to set up VLAN %04x", + vid); +} +EXPORT_SYMBOL_GPL(rtl8366_vlan_add); + +int rtl8366_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct realtek_smi *smi = ds->priv; + u16 vid; + int ret; + + dev_info(smi->dev, "del VLAN on port %d\n", port); + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { + int i; + + dev_info(smi->dev, "del VLAN %04x\n", vid); + + for (i = 0; i < smi->num_vlan_mc; i++) { + struct rtl8366_vlan_mc vlanmc; + + ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + if (vid == vlanmc.vid) { + /* clear VLAN member configurations */ + vlanmc.vid = 0; + vlanmc.priority = 0; + vlanmc.member = 0; + vlanmc.untag = 0; + vlanmc.fid = 0; + + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) { + dev_err(smi->dev, + "failed to remove VLAN %04x\n", + vid); + return ret; + } + break; + } + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_vlan_del); + +void rtl8366_get_strings(struct dsa_switch *ds, int port, uint8_t *data) +{ + struct realtek_smi *smi = ds->priv; + struct rtl8366_mib_counter *mib; + int i; + + if (port >= smi->num_ports) + return; + + for (i = 0; i < smi->num_mib_counters; i++) { + mib = &smi->mib_counters[i]; + memcpy(data + i * ETH_GSTRING_LEN, + mib->name, ETH_GSTRING_LEN); + } +} +EXPORT_SYMBOL_GPL(rtl8366_get_strings); + +int rtl8366_get_sset_count(struct dsa_switch *ds, int port) +{ + struct realtek_smi *smi = ds->priv; + + if (port >= smi->num_ports) + return -EINVAL; + + return smi->num_mib_counters; +} +EXPORT_SYMBOL_GPL(rtl8366_get_sset_count); + +void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) +{ + struct realtek_smi *smi = ds->priv; + int i; + int ret; + + if (port >= smi->num_ports) + return; + + for (i = 0; i < smi->num_mib_counters; i++) { + struct rtl8366_mib_counter *mib; + u64 mibvalue = 0; + + mib = &smi->mib_counters[i]; + ret = smi->ops->get_mib_counter(smi, port, mib, &mibvalue); + if (ret) { + dev_err(smi->dev, "error reading MIB counter %s\n", + mib->name); + } + data[i] = mibvalue; + } +} +EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats); diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c new file mode 100644 index 000000000000..69d88aefdb2f --- /dev/null +++ b/drivers/net/dsa/rtl8366rb.c @@ -0,0 +1,1411 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Realtek SMI subdriver for the Realtek RTL8366RB ethernet switch + * + * Copyright (C) 2017 Linus Walleij + * Copyright (C) 2009-2010 Gabor Juhos + * Copyright (C) 2010 Antti Seppälä + * Copyright (C) 2010 Roman Yeryomin + * Copyright (C) 2011 Colin Leitner + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "realtek-smi.h" + +#define RTL8366RB_PORT_NUM_CPU 5 +#define RTL8366RB_NUM_PORTS 6 +#define RTL8366RB_PHY_NO_MAX 4 +#define RTL8366RB_PHY_ADDR_MAX 31 + +/* Switch Global Configuration register */ +#define RTL8366RB_SGCR 0x0000 +#define RTL8366RB_SGCR_EN_BC_STORM_CTRL BIT(0) +#define RTL8366RB_SGCR_MAX_LENGTH(_x) (_x << 4) +#define RTL8366RB_SGCR_MAX_LENGTH_MASK RTL8366RB_SGCR_MAX_LENGTH(0x3) +#define RTL8366RB_SGCR_MAX_LENGTH_1522 RTL8366RB_SGCR_MAX_LENGTH(0x0) +#define RTL8366RB_SGCR_MAX_LENGTH_1536 RTL8366RB_SGCR_MAX_LENGTH(0x1) +#define RTL8366RB_SGCR_MAX_LENGTH_1552 RTL8366RB_SGCR_MAX_LENGTH(0x2) +#define RTL8366RB_SGCR_MAX_LENGTH_9216 RTL8366RB_SGCR_MAX_LENGTH(0x3) +#define RTL8366RB_SGCR_EN_VLAN BIT(13) +#define RTL8366RB_SGCR_EN_VLAN_4KTB BIT(14) + +/* Port Enable Control register */ +#define RTL8366RB_PECR 0x0001 + +/* Switch Security Control registers */ +#define RTL8366RB_SSCR0 0x0002 +#define RTL8366RB_SSCR1 0x0003 +#define RTL8366RB_SSCR2 0x0004 +#define RTL8366RB_SSCR2_DROP_UNKNOWN_DA BIT(0) + +/* Port Mirror Control Register */ +#define RTL8366RB_PMCR 0x0007 +#define RTL8366RB_PMCR_SOURCE_PORT(_x) (_x) +#define RTL8366RB_PMCR_SOURCE_PORT_MASK 0x000f +#define RTL8366RB_PMCR_MONITOR_PORT(_x) ((_x) << 4) +#define RTL8366RB_PMCR_MONITOR_PORT_MASK 0x00f0 +#define RTL8366RB_PMCR_MIRROR_RX BIT(8) +#define RTL8366RB_PMCR_MIRROR_TX BIT(9) +#define RTL8366RB_PMCR_MIRROR_SPC BIT(10) +#define RTL8366RB_PMCR_MIRROR_ISO BIT(11) + +#define RTL8366RB_PAACR0 0x0010 /* bits 0..7 = port 0, bits 8..15 = port 1 */ +#define RTL8366RB_PAACR1 0x0011 /* bits 0..7 = port 2, bits 8..15 = port 3 */ +#define RTL8366RB_PAACR2 0x0012 /* bits 0..7 = port 4, bits 8..15 = port 5 */ +#define RTL8366RB_PAACR_SPEED_10M 0 +#define RTL8366RB_PAACR_SPEED_100M 1 +#define RTL8366RB_PAACR_SPEED_1000M 2 +#define RTL8366RB_PAACR_FULL_DUPLEX BIT(2) +#define RTL8366RB_PAACR_LINK_UP BIT(4) +#define RTL8366RB_PAACR_TX_PAUSE BIT(5) +#define RTL8366RB_PAACR_RX_PAUSE BIT(6) +#define RTL8366RB_PAACR_AN BIT(7) + +#define RTL8366RB_PAACR_CPU_PORT (RTL8366RB_PAACR_SPEED_1000M | \ + RTL8366RB_PAACR_FULL_DUPLEX | \ + RTL8366RB_PAACR_LINK_UP | \ + RTL8366RB_PAACR_TX_PAUSE | \ + RTL8366RB_PAACR_RX_PAUSE) + +#define RTL8366RB_PSTAT0 0x0014 /* bits 0..7 = port 0, bits 8..15 = port 1 */ +#define RTL8366RB_PSTAT1 0x0015 /* bits 0..7 = port 2, bits 8..15 = port 3 */ +#define RTL8366RB_PSTAT2 0x0016 /* bits 0..7 = port 4, bits 8..15 = port 5 */ + +#define RTL8366RB_POWER_SAVING_REG 0x0021 + +/* CPU port control reg */ +#define RTL8368RB_CPU_CTRL_REG 0x0061 +#define RTL8368RB_CPU_PORTS_MSK 0x00FF +#define RTL8368RB_CPU_INSTAG BIT(15) /* enables inserting custom tag length/type 8899 */ + +#define RTL8366RB_SMAR0 0x0070 /* bits 0..15 */ +#define RTL8366RB_SMAR1 0x0071 /* bits 16..31 */ +#define RTL8366RB_SMAR2 0x0072 /* bits 32..47 */ + + +#define RTL8366RB_RESET_CTRL_REG 0x0100 +#define RTL8366RB_CHIP_CTRL_RESET_HW BIT(0) +#define RTL8366RB_CHIP_CTRL_RESET_SW BIT(1) + +#define RTL8366RB_CHIP_ID_REG 0x0509 +#define RTL8366RB_CHIP_ID_8366 0x5937 +#define RTL8366RB_CHIP_VERSION_CTRL_REG 0x050A +#define RTL8366RB_CHIP_VERSION_MASK 0xf + +/* PHY registers control */ +#define RTL8366RB_PHY_ACCESS_CTRL_REG 0x8000 +#define RTL8366RB_PHY_CTRL_READ BIT(0) +#define RTL8366RB_PHY_CTRL_WRITE 0 +#define RTL8366RB_PHY_ACCESS_BUSY_REG 0x8001 +#define RTL8366RB_PHY_INT_BUSY BIT(0) +#define RTL8366RB_PHY_EXT_BUSY BIT(4) +#define RTL8366RB_PHY_ACCESS_DATA_REG 0x8002 +#define RTL8366RB_PHY_EXT_CTRL_REG 0x8010 +#define RTL8366RB_PHY_EXT_WRDATA_REG 0x8011 +#define RTL8366RB_PHY_EXT_RDDATA_REG 0x8012 + +#define RTL8366RB_PHY_REG_MASK 0x1f +#define RTL8366RB_PHY_PAGE_OFFSET 5 +#define RTL8366RB_PHY_PAGE_MASK (0xf << 5) +#define RTL8366RB_PHY_NO_OFFSET 9 +#define RTL8366RB_PHY_NO_MASK (0x1f << 9) + +#define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f + +/* LED control registers */ +#define RTL8366RB_LED_BLINKRATE_REG 0x0430 +#define RTL8366RB_LED_BLINKRATE_MASK 0x0007 +#define RTL8366RB_LED_BLINKRATE_28MS 0x0000 +#define RTL8366RB_LED_BLINKRATE_56MS 0x0001 +#define RTL8366RB_LED_BLINKRATE_84MS 0x0002 +#define RTL8366RB_LED_BLINKRATE_111MS 0x0003 +#define RTL8366RB_LED_BLINKRATE_222MS 0x0004 +#define RTL8366RB_LED_BLINKRATE_446MS 0x0005 + +#define RTL8366RB_LED_CTRL_REG 0x0431 +#define RTL8366RB_LED_OFF 0x0 +#define RTL8366RB_LED_DUP_COL 0x1 +#define RTL8366RB_LED_LINK_ACT 0x2 +#define RTL8366RB_LED_SPD1000 0x3 +#define RTL8366RB_LED_SPD100 0x4 +#define RTL8366RB_LED_SPD10 0x5 +#define RTL8366RB_LED_SPD1000_ACT 0x6 +#define RTL8366RB_LED_SPD100_ACT 0x7 +#define RTL8366RB_LED_SPD10_ACT 0x8 +#define RTL8366RB_LED_SPD100_10_ACT 0x9 +#define RTL8366RB_LED_FIBER 0xa +#define RTL8366RB_LED_AN_FAULT 0xb +#define RTL8366RB_LED_LINK_RX 0xc +#define RTL8366RB_LED_LINK_TX 0xd +#define RTL8366RB_LED_MASTER 0xe +#define RTL8366RB_LED_FORCE 0xf +#define RTL8366RB_LED_0_1_CTRL_REG 0x0432 +#define RTL8366RB_LED_1_OFFSET 6 +#define RTL8366RB_LED_2_3_CTRL_REG 0x0433 +#define RTL8366RB_LED_3_OFFSET 6 + +#define RTL8366RB_MIB_COUNT 33 +#define RTL8366RB_GLOBAL_MIB_COUNT 1 +#define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050 +#define RTL8366RB_MIB_COUNTER_BASE 0x1000 +#define RTL8366RB_MIB_CTRL_REG 0x13F0 +#define RTL8366RB_MIB_CTRL_USER_MASK 0x0FFC +#define RTL8366RB_MIB_CTRL_BUSY_MASK BIT(0) +#define RTL8366RB_MIB_CTRL_RESET_MASK BIT(1) +#define RTL8366RB_MIB_CTRL_PORT_RESET(_p) BIT(2 + (_p)) +#define RTL8366RB_MIB_CTRL_GLOBAL_RESET BIT(11) + +#define RTL8366RB_PORT_VLAN_CTRL_BASE 0x0063 +#define RTL8366RB_PORT_VLAN_CTRL_REG(_p) \ + (RTL8366RB_PORT_VLAN_CTRL_BASE + (_p) / 4) +#define RTL8366RB_PORT_VLAN_CTRL_MASK 0xf +#define RTL8366RB_PORT_VLAN_CTRL_SHIFT(_p) (4 * ((_p) % 4)) + +#define RTL8366RB_VLAN_TABLE_READ_BASE 0x018C +#define RTL8366RB_VLAN_TABLE_WRITE_BASE 0x0185 + +#define RTL8366RB_TABLE_ACCESS_CTRL_REG 0x0180 +#define RTL8366RB_TABLE_VLAN_READ_CTRL 0x0E01 +#define RTL8366RB_TABLE_VLAN_WRITE_CTRL 0x0F01 + +#define RTL8366RB_VLAN_MC_BASE(_x) (0x0020 + (_x) * 3) + +#define RTL8366RB_PORT_LINK_STATUS_BASE 0x0014 +#define RTL8366RB_PORT_STATUS_SPEED_MASK 0x0003 +#define RTL8366RB_PORT_STATUS_DUPLEX_MASK 0x0004 +#define RTL8366RB_PORT_STATUS_LINK_MASK 0x0010 +#define RTL8366RB_PORT_STATUS_TXPAUSE_MASK 0x0020 +#define RTL8366RB_PORT_STATUS_RXPAUSE_MASK 0x0040 +#define RTL8366RB_PORT_STATUS_AN_MASK 0x0080 + +#define RTL8366RB_NUM_VLANS 16 +#define RTL8366RB_NUM_LEDGROUPS 4 +#define RTL8366RB_NUM_VIDS 4096 +#define RTL8366RB_PRIORITYMAX 7 +#define RTL8366RB_FIDMAX 7 + +#define RTL8366RB_PORT_1 BIT(0) /* In userspace port 0 */ +#define RTL8366RB_PORT_2 BIT(1) /* In userspace port 1 */ +#define RTL8366RB_PORT_3 BIT(2) /* In userspace port 2 */ +#define RTL8366RB_PORT_4 BIT(3) /* In userspace port 3 */ +#define RTL8366RB_PORT_5 BIT(4) /* In userspace port 4 */ + +#define RTL8366RB_PORT_CPU BIT(5) /* CPU port */ + +#define RTL8366RB_PORT_ALL (RTL8366RB_PORT_1 | \ + RTL8366RB_PORT_2 | \ + RTL8366RB_PORT_3 | \ + RTL8366RB_PORT_4 | \ + RTL8366RB_PORT_5 | \ + RTL8366RB_PORT_CPU) + +#define RTL8366RB_PORT_ALL_BUT_CPU (RTL8366RB_PORT_1 | \ + RTL8366RB_PORT_2 | \ + RTL8366RB_PORT_3 | \ + RTL8366RB_PORT_4 | \ + RTL8366RB_PORT_5) + +#define RTL8366RB_PORT_ALL_EXTERNAL (RTL8366RB_PORT_1 | \ + RTL8366RB_PORT_2 | \ + RTL8366RB_PORT_3 | \ + RTL8366RB_PORT_4) + +#define RTL8366RB_PORT_ALL_INTERNAL RTL8366RB_PORT_CPU + +/* First configuration word per member config, VID and prio */ +#define RTL8366RB_VLAN_VID_MASK 0xfff +#define RTL8366RB_VLAN_PRIORITY_SHIFT 12 +#define RTL8366RB_VLAN_PRIORITY_MASK 0x7 +/* Second configuration word per member config, member and untagged */ +#define RTL8366RB_VLAN_UNTAG_SHIFT 8 +#define RTL8366RB_VLAN_UNTAG_MASK 0xff +#define RTL8366RB_VLAN_MEMBER_MASK 0xff +/* Third config word per member config, STAG currently unused */ +#define RTL8366RB_VLAN_STAG_MBR_MASK 0xff +#define RTL8366RB_VLAN_STAG_MBR_SHIFT 8 +#define RTL8366RB_VLAN_STAG_IDX_MASK 0x7 +#define RTL8366RB_VLAN_STAG_IDX_SHIFT 5 +#define RTL8366RB_VLAN_FID_MASK 0x7 + +/* Port ingress bandwidth control */ +#define RTL8366RB_IB_BASE 0x0200 +#define RTL8366RB_IB_REG(pnum) (RTL8366RB_IB_BASE + pnum) +#define RTL8366RB_IB_BDTH_MASK 0x3fff +#define RTL8366RB_IB_PREIFG_OFFSET 14 +#define RTL8366RB_IB_PREIFG_MASK (1 << RTL8366RB_IB_PREIFG_OFFSET) + +/* Port egress bandwidth control */ +#define RTL8366RB_EB_BASE 0x02d1 +#define RTL8366RB_EB_REG(pnum) (RTL8366RB_EB_BASE + pnum) +#define RTL8366RB_EB_BDTH_MASK 0x3fff +#define RTL8366RB_EB_PREIFG_REG 0x02f8 +#define RTL8366RB_EB_PREIFG_OFFSET 9 +#define RTL8366RB_EB_PREIFG_MASK (1 << RTL8366RB_EB_PREIFG_OFFSET) + +#define RTL8366RB_BDTH_SW_MAX 1048512 /* 1048576? */ +#define RTL8366RB_BDTH_UNIT 64 +#define RTL8366RB_BDTH_REG_DEFAULT 16383 + +/* QOS */ +#define RTL8366RB_QOS_BIT 15 +#define RTL8366RB_QOS_MASK (1 << RTL8366RB_QOS_BIT) +/* Include/Exclude Preamble and IFG (20 bytes). 0:Exclude, 1:Include. */ +#define RTL8366RB_QOS_DEFAULT_PREIFG 1 + +/* Interrupt handling */ +#define RTL8366RB_INTERRUPT_CONTROL_REG 0x0440 +#define RTL8366RB_INTERRUPT_POLARITY BIT(0) +#define RTL8366RB_P4_RGMII_LED BIT(2) +#define RTL8366RB_INTERRUPT_MASK_REG 0x0441 +#define RTL8366RB_INTERRUPT_LINK_CHGALL GENMASK(11, 0) +#define RTL8366RB_INTERRUPT_ACLEXCEED BIT(8) +#define RTL8366RB_INTERRUPT_STORMEXCEED BIT(9) +#define RTL8366RB_INTERRUPT_P4_FIBER BIT(12) +#define RTL8366RB_INTERRUPT_P4_UTP BIT(13) +#define RTL8366RB_INTERRUPT_VALID (RTL8366RB_INTERRUPT_LINK_CHGALL | \ + RTL8366RB_INTERRUPT_ACLEXCEED | \ + RTL8366RB_INTERRUPT_STORMEXCEED | \ + RTL8366RB_INTERRUPT_P4_FIBER | \ + RTL8366RB_INTERRUPT_P4_UTP) +#define RTL8366RB_INTERRUPT_STATUS_REG 0x0442 +#define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */ + +/* bits 0..5 enable force when cleared */ +#define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11 + +#define RTL8366RB_GREEN_FEATURE_REG 0x0F51 +#define RTL8366RB_GREEN_FEATURE_MSK 0x0007 +#define RTL8366RB_GREEN_FEATURE_TX BIT(0) +#define RTL8366RB_GREEN_FEATURE_RX BIT(2) + +static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = { + { 0, 0, 4, "IfInOctets" }, + { 0, 4, 4, "EtherStatsOctets" }, + { 0, 8, 2, "EtherStatsUnderSizePkts" }, + { 0, 10, 2, "EtherFragments" }, + { 0, 12, 2, "EtherStatsPkts64Octets" }, + { 0, 14, 2, "EtherStatsPkts65to127Octets" }, + { 0, 16, 2, "EtherStatsPkts128to255Octets" }, + { 0, 18, 2, "EtherStatsPkts256to511Octets" }, + { 0, 20, 2, "EtherStatsPkts512to1023Octets" }, + { 0, 22, 2, "EtherStatsPkts1024to1518Octets" }, + { 0, 24, 2, "EtherOversizeStats" }, + { 0, 26, 2, "EtherStatsJabbers" }, + { 0, 28, 2, "IfInUcastPkts" }, + { 0, 30, 2, "EtherStatsMulticastPkts" }, + { 0, 32, 2, "EtherStatsBroadcastPkts" }, + { 0, 34, 2, "EtherStatsDropEvents" }, + { 0, 36, 2, "Dot3StatsFCSErrors" }, + { 0, 38, 2, "Dot3StatsSymbolErrors" }, + { 0, 40, 2, "Dot3InPauseFrames" }, + { 0, 42, 2, "Dot3ControlInUnknownOpcodes" }, + { 0, 44, 4, "IfOutOctets" }, + { 0, 48, 2, "Dot3StatsSingleCollisionFrames" }, + { 0, 50, 2, "Dot3StatMultipleCollisionFrames" }, + { 0, 52, 2, "Dot3sDeferredTransmissions" }, + { 0, 54, 2, "Dot3StatsLateCollisions" }, + { 0, 56, 2, "EtherStatsCollisions" }, + { 0, 58, 2, "Dot3StatsExcessiveCollisions" }, + { 0, 60, 2, "Dot3OutPauseFrames" }, + { 0, 62, 2, "Dot1dBasePortDelayExceededDiscards" }, + { 0, 64, 2, "Dot1dTpPortInDiscards" }, + { 0, 66, 2, "IfOutUcastPkts" }, + { 0, 68, 2, "IfOutMulticastPkts" }, + { 0, 70, 2, "IfOutBroadcastPkts" }, +}; + +static int rtl8366rb_get_mib_counter(struct realtek_smi *smi, + int port, + struct rtl8366_mib_counter *mib, + u64 *mibvalue) +{ + u32 addr, val; + int ret; + int i; + + addr = RTL8366RB_MIB_COUNTER_BASE + + RTL8366RB_MIB_COUNTER_PORT_OFFSET * (port) + + mib->offset; + + /* + * Writing access counter address first + * then ASIC will prepare 64bits counter wait for being retrived + */ + ret = regmap_write(smi->map, addr, 0); /* Write whatever */ + if (ret) + return ret; + + /* Read MIB control register */ + ret = regmap_read(smi->map, RTL8366RB_MIB_CTRL_REG, &val); + if (ret) + return -EIO; + + if (val & RTL8366RB_MIB_CTRL_BUSY_MASK) + return -EBUSY; + + if (val & RTL8366RB_MIB_CTRL_RESET_MASK) + return -EIO; + + /* + * Read each individual MIB 16 bits at the time + */ + *mibvalue = 0; + for (i = mib->length; i > 0; i--) { + ret = regmap_read(smi->map, addr + (i - 1), &val); + if (ret) + return ret; + *mibvalue = (*mibvalue << 16) | (val & 0xFFFF); + } + return 0; +} + +static u32 rtl8366rb_get_irqmask(struct irq_data *d) +{ + int line = irqd_to_hwirq(d); + u32 val; + + /* + * For line interrupts we combine link down in bits + * 6..11 with link up in bits 0..5 into one interrupt. + */ + if (line < 12) + val = BIT(line) | BIT(line+6); + else + val = BIT(line); + return val; +} + +static void rtl8366rb_mask_irq(struct irq_data *d) +{ + struct realtek_smi *smi = irq_data_get_irq_chip_data(d); + int ret; + + ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_MASK_REG, + rtl8366rb_get_irqmask(d), 0); + if (ret) + dev_err(smi->dev, "could not mask IRQ\n"); +} + +static void rtl8366rb_unmask_irq(struct irq_data *d) +{ + struct realtek_smi *smi = irq_data_get_irq_chip_data(d); + int ret; + + ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_MASK_REG, + rtl8366rb_get_irqmask(d), + rtl8366rb_get_irqmask(d)); + if (ret) + dev_err(smi->dev, "could not unmask IRQ\n"); +} + +static irqreturn_t rtl8366rb_irq(int irq, void *data) +{ + struct realtek_smi *smi = data; + u32 stat; + int ret; + + /* This clears the IRQ status register */ + ret = regmap_read(smi->map, RTL8366RB_INTERRUPT_STATUS_REG, + &stat); + if (ret) { + dev_err(smi->dev, "can't read interrupt status\n"); + return IRQ_NONE; + } + stat &= RTL8366RB_INTERRUPT_VALID; + if (!stat) + return IRQ_NONE; + while (stat) { + int line = __ffs(stat); + int child_irq; + + stat &= ~BIT(line); + /* + * For line interrupts we combine link down in bits + * 6..11 with link up in bits 0..5 into one interrupt. + */ + if (line < 12 && line > 5) + line -= 5; + child_irq = irq_find_mapping(smi->irqdomain, line); + handle_nested_irq(child_irq); + } + return IRQ_HANDLED; +} + +static struct irq_chip rtl8366rb_irq_chip = { + .name = "RTL8366RB", + .irq_mask = rtl8366rb_mask_irq, + .irq_unmask = rtl8366rb_unmask_irq, +}; + +static int rtl8366rb_irq_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(irq, domain->host_data); + irq_set_chip_and_handler(irq, &rtl8366rb_irq_chip, handle_simple_irq); + irq_set_nested_thread(irq, 1); + irq_set_noprobe(irq); + + return 0; +} + +static void rtl8366rb_irq_unmap(struct irq_domain *d, unsigned int irq) +{ + irq_set_nested_thread(irq, 0); + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); +} + +static const struct irq_domain_ops rtl8366rb_irqdomain_ops = { + .map = rtl8366rb_irq_map, + .unmap = rtl8366rb_irq_unmap, + .xlate = irq_domain_xlate_onecell, +}; + +static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi) +{ + struct device_node *intc = of_get_child_by_name(smi->dev->of_node, + "interrupt-controller"); + unsigned long irq_trig; + int irq; + int ret; + u32 val; + int i; + + if (!intc) { + dev_err(smi->dev, "missing child interrupt-controller node\n"); + return -EINVAL; + } + /* RB8366RB IRQs cascade off this one */ + irq = of_irq_get(intc, 0); + if (irq <= 0) { + dev_err(smi->dev, "failed to get parent IRQ\n"); + return irq ? irq : -EINVAL; + } + + /* This clears the IRQ status register */ + ret = regmap_read(smi->map, RTL8366RB_INTERRUPT_STATUS_REG, + &val); + if (ret) { + dev_err(smi->dev, "can't read interrupt status\n"); + return ret; + } + + /* Fetch IRQ edge information from the descriptor */ + irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + switch (irq_trig) { + case IRQF_TRIGGER_RISING: + case IRQF_TRIGGER_HIGH: + dev_info(smi->dev, "active high/rising IRQ\n"); + val = 0; + break; + case IRQF_TRIGGER_FALLING: + case IRQF_TRIGGER_LOW: + dev_info(smi->dev, "active low/falling IRQ\n"); + val = RTL8366RB_INTERRUPT_POLARITY; + break; + } + ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_CONTROL_REG, + RTL8366RB_INTERRUPT_POLARITY, + val); + if (ret) { + dev_err(smi->dev, "could not configure IRQ polarity\n"); + return ret; + } + + ret = devm_request_threaded_irq(smi->dev, irq, NULL, + rtl8366rb_irq, IRQF_ONESHOT, + "RTL8366RB", smi); + if (ret) { + dev_err(smi->dev, "unable to request irq: %d\n", ret); + return ret; + } + smi->irqdomain = irq_domain_add_linear(intc, + RTL8366RB_NUM_INTERRUPT, + &rtl8366rb_irqdomain_ops, + smi); + if (!smi->irqdomain) { + dev_err(smi->dev, "failed to create IRQ domain\n"); + return -EINVAL; + } + for (i = 0; i < smi->num_ports; i++) + irq_set_parent(irq_create_mapping(smi->irqdomain, i), irq); + + return 0; +} + +static int rtl8366rb_set_addr(struct realtek_smi *smi) +{ + u8 addr[ETH_ALEN]; + u16 val; + int ret; + + eth_random_addr(addr); + + dev_info(smi->dev, "set MAC: %02X:%02X:%02X:%02X:%02X:%02X\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); + val = addr[0] << 8 | addr[1]; + ret = regmap_write(smi->map, RTL8366RB_SMAR0, val); + if (ret) + return ret; + val = addr[2] << 8 | addr[3]; + ret = regmap_write(smi->map, RTL8366RB_SMAR1, val); + if (ret) + return ret; + val = addr[4] << 8 | addr[5]; + ret = regmap_write(smi->map, RTL8366RB_SMAR2, val); + if (ret) + return ret; + + return 0; +} + +/* Found in a vendor driver */ + +/* For the "version 0" early silicon, appear in most source releases */ +static const u16 rtl8366rb_init_jam_ver_0[] = { + 0x000B, 0x0001, 0x03A6, 0x0100, 0x03A7, 0x0001, 0x02D1, 0x3FFF, + 0x02D2, 0x3FFF, 0x02D3, 0x3FFF, 0x02D4, 0x3FFF, 0x02D5, 0x3FFF, + 0x02D6, 0x3FFF, 0x02D7, 0x3FFF, 0x02D8, 0x3FFF, 0x022B, 0x0688, + 0x022C, 0x0FAC, 0x03D0, 0x4688, 0x03D1, 0x01F5, 0x0000, 0x0830, + 0x02F9, 0x0200, 0x02F7, 0x7FFF, 0x02F8, 0x03FF, 0x0080, 0x03E8, + 0x0081, 0x00CE, 0x0082, 0x00DA, 0x0083, 0x0230, 0xBE0F, 0x2000, + 0x0231, 0x422A, 0x0232, 0x422A, 0x0233, 0x422A, 0x0234, 0x422A, + 0x0235, 0x422A, 0x0236, 0x422A, 0x0237, 0x422A, 0x0238, 0x422A, + 0x0239, 0x422A, 0x023A, 0x422A, 0x023B, 0x422A, 0x023C, 0x422A, + 0x023D, 0x422A, 0x023E, 0x422A, 0x023F, 0x422A, 0x0240, 0x422A, + 0x0241, 0x422A, 0x0242, 0x422A, 0x0243, 0x422A, 0x0244, 0x422A, + 0x0245, 0x422A, 0x0246, 0x422A, 0x0247, 0x422A, 0x0248, 0x422A, + 0x0249, 0x0146, 0x024A, 0x0146, 0x024B, 0x0146, 0xBE03, 0xC961, + 0x024D, 0x0146, 0x024E, 0x0146, 0x024F, 0x0146, 0x0250, 0x0146, + 0xBE64, 0x0226, 0x0252, 0x0146, 0x0253, 0x0146, 0x024C, 0x0146, + 0x0251, 0x0146, 0x0254, 0x0146, 0xBE62, 0x3FD0, 0x0084, 0x0320, + 0x0255, 0x0146, 0x0256, 0x0146, 0x0257, 0x0146, 0x0258, 0x0146, + 0x0259, 0x0146, 0x025A, 0x0146, 0x025B, 0x0146, 0x025C, 0x0146, + 0x025D, 0x0146, 0x025E, 0x0146, 0x025F, 0x0146, 0x0260, 0x0146, + 0x0261, 0xA23F, 0x0262, 0x0294, 0x0263, 0xA23F, 0x0264, 0x0294, + 0x0265, 0xA23F, 0x0266, 0x0294, 0x0267, 0xA23F, 0x0268, 0x0294, + 0x0269, 0xA23F, 0x026A, 0x0294, 0x026B, 0xA23F, 0x026C, 0x0294, + 0x026D, 0xA23F, 0x026E, 0x0294, 0x026F, 0xA23F, 0x0270, 0x0294, + 0x02F5, 0x0048, 0xBE09, 0x0E00, 0xBE1E, 0x0FA0, 0xBE14, 0x8448, + 0xBE15, 0x1007, 0xBE4A, 0xA284, 0xC454, 0x3F0B, 0xC474, 0x3F0B, + 0xBE48, 0x3672, 0xBE4B, 0x17A7, 0xBE4C, 0x0B15, 0xBE52, 0x0EDD, + 0xBE49, 0x8C00, 0xBE5B, 0x785C, 0xBE5C, 0x785C, 0xBE5D, 0x785C, + 0xBE61, 0x368A, 0xBE63, 0x9B84, 0xC456, 0xCC13, 0xC476, 0xCC13, + 0xBE65, 0x307D, 0xBE6D, 0x0005, 0xBE6E, 0xE120, 0xBE2E, 0x7BAF, +}; + +/* This v1 init sequence is from Belkin F5D8235 U-Boot release */ +static const u16 rtl8366rb_init_jam_ver_1[] = { + 0x0000, 0x0830, 0x0001, 0x8000, 0x0400, 0x8130, 0xBE78, 0x3C3C, + 0x0431, 0x5432, 0xBE37, 0x0CE4, 0x02FA, 0xFFDF, 0x02FB, 0xFFE0, + 0xC44C, 0x1585, 0xC44C, 0x1185, 0xC44C, 0x1585, 0xC46C, 0x1585, + 0xC46C, 0x1185, 0xC46C, 0x1585, 0xC451, 0x2135, 0xC471, 0x2135, + 0xBE10, 0x8140, 0xBE15, 0x0007, 0xBE6E, 0xE120, 0xBE69, 0xD20F, + 0xBE6B, 0x0320, 0xBE24, 0xB000, 0xBE23, 0xFF51, 0xBE22, 0xDF20, + 0xBE21, 0x0140, 0xBE20, 0x00BB, 0xBE24, 0xB800, 0xBE24, 0x0000, + 0xBE24, 0x7000, 0xBE23, 0xFF51, 0xBE22, 0xDF60, 0xBE21, 0x0140, + 0xBE20, 0x0077, 0xBE24, 0x7800, 0xBE24, 0x0000, 0xBE2E, 0x7B7A, + 0xBE36, 0x0CE4, 0x02F5, 0x0048, 0xBE77, 0x2940, 0x000A, 0x83E0, + 0xBE79, 0x3C3C, 0xBE00, 0x1340, +}; + +/* This v2 init sequence is from Belkin F5D8235 U-Boot release */ +static const u16 rtl8366rb_init_jam_ver_2[] = { + 0x0450, 0x0000, 0x0400, 0x8130, 0x000A, 0x83ED, 0x0431, 0x5432, + 0xC44F, 0x6250, 0xC46F, 0x6250, 0xC456, 0x0C14, 0xC476, 0x0C14, + 0xC44C, 0x1C85, 0xC44C, 0x1885, 0xC44C, 0x1C85, 0xC46C, 0x1C85, + 0xC46C, 0x1885, 0xC46C, 0x1C85, 0xC44C, 0x0885, 0xC44C, 0x0881, + 0xC44C, 0x0885, 0xC46C, 0x0885, 0xC46C, 0x0881, 0xC46C, 0x0885, + 0xBE2E, 0x7BA7, 0xBE36, 0x1000, 0xBE37, 0x1000, 0x8000, 0x0001, + 0xBE69, 0xD50F, 0x8000, 0x0000, 0xBE69, 0xD50F, 0xBE6E, 0x0320, + 0xBE77, 0x2940, 0xBE78, 0x3C3C, 0xBE79, 0x3C3C, 0xBE6E, 0xE120, + 0x8000, 0x0001, 0xBE15, 0x1007, 0x8000, 0x0000, 0xBE15, 0x1007, + 0xBE14, 0x0448, 0xBE1E, 0x00A0, 0xBE10, 0x8160, 0xBE10, 0x8140, + 0xBE00, 0x1340, 0x0F51, 0x0010, +}; + +/* Appears in an DDWRT code dump */ +static const u16 rtl8366rb_init_jam_ver_3[] = { + 0x0000, 0x0830, 0x0400, 0x8130, 0x000A, 0x83ED, 0x0431, 0x5432, + 0x0F51, 0x0017, 0x02F5, 0x0048, 0x02FA, 0xFFDF, 0x02FB, 0xFFE0, + 0xC456, 0x0C14, 0xC476, 0x0C14, 0xC454, 0x3F8B, 0xC474, 0x3F8B, + 0xC450, 0x2071, 0xC470, 0x2071, 0xC451, 0x226B, 0xC471, 0x226B, + 0xC452, 0xA293, 0xC472, 0xA293, 0xC44C, 0x1585, 0xC44C, 0x1185, + 0xC44C, 0x1585, 0xC46C, 0x1585, 0xC46C, 0x1185, 0xC46C, 0x1585, + 0xC44C, 0x0185, 0xC44C, 0x0181, 0xC44C, 0x0185, 0xC46C, 0x0185, + 0xC46C, 0x0181, 0xC46C, 0x0185, 0xBE24, 0xB000, 0xBE23, 0xFF51, + 0xBE22, 0xDF20, 0xBE21, 0x0140, 0xBE20, 0x00BB, 0xBE24, 0xB800, + 0xBE24, 0x0000, 0xBE24, 0x7000, 0xBE23, 0xFF51, 0xBE22, 0xDF60, + 0xBE21, 0x0140, 0xBE20, 0x0077, 0xBE24, 0x7800, 0xBE24, 0x0000, + 0xBE2E, 0x7BA7, 0xBE36, 0x1000, 0xBE37, 0x1000, 0x8000, 0x0001, + 0xBE69, 0xD50F, 0x8000, 0x0000, 0xBE69, 0xD50F, 0xBE6B, 0x0320, + 0xBE77, 0x2800, 0xBE78, 0x3C3C, 0xBE79, 0x3C3C, 0xBE6E, 0xE120, + 0x8000, 0x0001, 0xBE10, 0x8140, 0x8000, 0x0000, 0xBE10, 0x8140, + 0xBE15, 0x1007, 0xBE14, 0x0448, 0xBE1E, 0x00A0, 0xBE10, 0x8160, + 0xBE10, 0x8140, 0xBE00, 0x1340, 0x0450, 0x0000, 0x0401, 0x0000, +}; + +/* Belkin F5D8235 v1, "belkin,f5d8235-v1" */ +static const u16 rtl8366rb_init_jam_f5d8235[] = { + 0x0242, 0x02BF, 0x0245, 0x02BF, 0x0248, 0x02BF, 0x024B, 0x02BF, + 0x024E, 0x02BF, 0x0251, 0x02BF, 0x0254, 0x0A3F, 0x0256, 0x0A3F, + 0x0258, 0x0A3F, 0x025A, 0x0A3F, 0x025C, 0x0A3F, 0x025E, 0x0A3F, + 0x0263, 0x007C, 0x0100, 0x0004, 0xBE5B, 0x3500, 0x800E, 0x200F, + 0xBE1D, 0x0F00, 0x8001, 0x5011, 0x800A, 0xA2F4, 0x800B, 0x17A3, + 0xBE4B, 0x17A3, 0xBE41, 0x5011, 0xBE17, 0x2100, 0x8000, 0x8304, + 0xBE40, 0x8304, 0xBE4A, 0xA2F4, 0x800C, 0xA8D5, 0x8014, 0x5500, + 0x8015, 0x0004, 0xBE4C, 0xA8D5, 0xBE59, 0x0008, 0xBE09, 0x0E00, + 0xBE36, 0x1036, 0xBE37, 0x1036, 0x800D, 0x00FF, 0xBE4D, 0x00FF, +}; + +/* DGN3500, "netgear,dgn3500", "netgear,dgn3500b" */ +static const u16 rtl8366rb_init_jam_dgn3500[] = { + 0x0000, 0x0830, 0x0400, 0x8130, 0x000A, 0x83ED, 0x0F51, 0x0017, + 0x02F5, 0x0048, 0x02FA, 0xFFDF, 0x02FB, 0xFFE0, 0x0450, 0x0000, + 0x0401, 0x0000, 0x0431, 0x0960, +}; + +/* + * This jam table activates "green ethernet", which means low power mode + * and is claimed to detect the cable length and not use more power than + * necessary, and the ports should enter power saving mode 10 seconds after + * a cable is disconnected. Seems to always be the same. + */ +static const u16 rtl8366rb_green_jam[][2] = { + {0xBE78, 0x323C}, {0xBE77, 0x5000}, {0xBE2E, 0x7BA7}, + {0xBE59, 0x3459}, {0xBE5A, 0x745A}, {0xBE5B, 0x785C}, + {0xBE5C, 0x785C}, {0xBE6E, 0xE120}, {0xBE79, 0x323C}, +}; + +static int rtl8366rb_setup(struct dsa_switch *ds) +{ + struct realtek_smi *smi = ds->priv; + const u16 *jam_table; + int jam_size; + u32 chip_id = 0; + u32 chip_ver = 0; + u32 val; + int ret; + int i; + + ret = regmap_read(smi->map, RTL8366RB_CHIP_ID_REG, &chip_id); + if (ret) { + dev_err(smi->dev, "unable to read chip id\n"); + return ret; + } + + switch (chip_id) { + case RTL8366RB_CHIP_ID_8366: + break; + default: + dev_err(smi->dev, "unknown chip id (%04x)\n", chip_id); + return -ENODEV; + } + + ret = regmap_read(smi->map, RTL8366RB_CHIP_VERSION_CTRL_REG, + &chip_ver); + if (ret) { + dev_err(smi->dev, "unable to read chip version\n"); + return ret; + } + + dev_info(smi->dev, "RTL%04x ver %u chip found\n", + chip_id, chip_ver & RTL8366RB_CHIP_VERSION_MASK); + + + /* Do the init dance using the right jam table */ + switch (chip_ver) { + case 0: + jam_table = rtl8366rb_init_jam_ver_0; + jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_0); + break; + case 1: + jam_table = rtl8366rb_init_jam_ver_1; + jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_1); + break; + case 2: + jam_table = rtl8366rb_init_jam_ver_2; + jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_2); + break; + default: + jam_table = rtl8366rb_init_jam_ver_3; + jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_3); + break; + } + + /* Special jam tables for special routers */ + if (of_machine_is_compatible("belkin,f5d8235-v1")) { + jam_table = rtl8366rb_init_jam_f5d8235; + jam_size = ARRAY_SIZE(rtl8366rb_init_jam_f5d8235); + } + if (of_machine_is_compatible("netgear,dgn3500") || + of_machine_is_compatible("netgear,dgn3500b")) { + jam_table = rtl8366rb_init_jam_dgn3500; + jam_size = ARRAY_SIZE(rtl8366rb_init_jam_dgn3500); + } + + i = 0; + while (i < jam_size) { + if ((jam_table[i] & 0xBE00) == 0xBE00) { + ret = regmap_read(smi->map, + RTL8366RB_PHY_ACCESS_BUSY_REG, + &val); + if (ret) + return ret; + if (!(val & RTL8366RB_PHY_INT_BUSY)) { + ret = regmap_write(smi->map, + RTL8366RB_PHY_ACCESS_CTRL_REG, + RTL8366RB_PHY_CTRL_WRITE); + if (ret) + return ret; + } + } + dev_dbg(smi->dev, "jam %04x into register %04x\n", + jam_table[i+1], + jam_table[i]); + ret = regmap_write(smi->map, + jam_table[i], + jam_table[i+1]); + if (ret) + return ret; + i+=2; + } + + /* Set up the "green ethernet" feature */ + i = 0; + while (i < ARRAY_SIZE(rtl8366rb_green_jam)) { + ret = regmap_read(smi->map, RTL8366RB_PHY_ACCESS_BUSY_REG, + &val); + if (ret) + return ret; + if (!(val & RTL8366RB_PHY_INT_BUSY)) { + ret = regmap_write(smi->map, + RTL8366RB_PHY_ACCESS_CTRL_REG, + RTL8366RB_PHY_CTRL_WRITE); + if (ret) + return ret; + ret = regmap_write(smi->map, + rtl8366rb_green_jam[i][0], + rtl8366rb_green_jam[i][1]); + if (ret) + return ret; + i++; + } + } + ret = regmap_write(smi->map, + RTL8366RB_GREEN_FEATURE_REG, + (chip_ver == 1) ? 0x0007 : 0x0003); + if (ret) + return ret; + /* + * The RTL8366RB PHY driver will set up the PHY registers for power + * saving mode. + */ + + /* Vendor driver sets 0x240 in registers 0xc and 0xd (undocumented) */ + ret = regmap_write(smi->map, 0x0c, 0x240); + if (ret) + return ret; + ret = regmap_write(smi->map, 0x0d, 0x240); + if (ret) + return ret; + + /* Set some random MAC address */ + ret = rtl8366rb_set_addr(smi); + if (ret) + return ret; + + /* Enable CPU port and enable inserting CPU tag */ + ret = regmap_update_bits(smi->map, RTL8368RB_CPU_CTRL_REG, + 0xFFFF, + RTL8368RB_CPU_INSTAG | BIT(smi->cpu_port)); + if (ret) + return ret; + + /* Make sure we default-enable the fixed CPU port */ + ret = regmap_update_bits(smi->map, RTL8366RB_PECR, + BIT(smi->cpu_port), + 0); + if (ret) + return ret; + + /* Set maximum packet length to 1536 bytes */ + ret = regmap_update_bits(smi->map, RTL8366RB_SGCR, + RTL8366RB_SGCR_MAX_LENGTH_MASK, + RTL8366RB_SGCR_MAX_LENGTH_1536); + if (ret) + return ret; + + /* Enable learning for all ports */ + ret = regmap_write(smi->map, RTL8366RB_SSCR0, 0); + if (ret) + return ret; + + /* Enable auto ageing for all ports */ + ret = regmap_write(smi->map, RTL8366RB_SSCR1, 0); + if (ret) + return ret; + + /* + * Discard VLAN tagged packets if the port is not a member of + * the VLAN with which the packets is associated. + */ + ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, + RTL8366RB_PORT_ALL); + if (ret) + return ret; + + /* Don't drop packets whose DA has not been learned */ + ret = regmap_update_bits(smi->map, RTL8366RB_SSCR2, + RTL8366RB_SSCR2_DROP_UNKNOWN_DA, 0); + if (ret) + return ret; + + /* Set blinking, TODO: make this configurable */ + ret = regmap_update_bits(smi->map, RTL8366RB_LED_BLINKRATE_REG, + RTL8366RB_LED_BLINKRATE_MASK, + RTL8366RB_LED_BLINKRATE_56MS); + if (ret) + return ret; + + /* + * Set up LED activity + * + * Each port has 4 LEDs, we configure all ports to the same + * behaviour (no individual config) but we can set up each + * LED separately. + */ + if (smi->leds_disabled) { + /* Turn everything off */ + regmap_update_bits(smi->map, + RTL8366RB_LED_0_1_CTRL_REG, + 0x0FFF, 0); + regmap_update_bits(smi->map, + RTL8366RB_LED_2_3_CTRL_REG, + 0x0FFF, 0); + regmap_update_bits(smi->map, + RTL8366RB_INTERRUPT_CONTROL_REG, + RTL8366RB_P4_RGMII_LED, + 0); + val = RTL8366RB_LED_OFF; + } else { + /* TODO: make this configurable per LED */ + val = RTL8366RB_LED_FORCE; + } + for (i = 0; i < 4; i++) { + ret = regmap_update_bits(smi->map, + RTL8366RB_LED_CTRL_REG, + 0xf << (i * 4), + val << (i * 4)); + if (ret) + return ret; + } + + /* Issues reset_vlan(), enable_vlan(true), enable_vlan4k(true) */ + ret = rtl8366_init_vlan(smi); + if (ret) + return ret; + + ret = rtl8366rb_setup_cascaded_irq(smi); + if (ret) + dev_info(smi->dev, "no interrupt support\n"); + + ret = realtek_smi_setup_mdio(smi); + if (ret) { + dev_info(smi->dev, "could not set up MDIO bus\n"); + return -ENODEV; + } + + return 0; +} + +static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds, + int port) +{ + /* FIXME: implement the right tagging protocol */ + return DSA_TAG_PROTO_NONE; +} + +static void rtl8366rb_adjust_link(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct realtek_smi *smi = ds->priv; + int ret; + + if (port != smi->cpu_port) + return; + + dev_info(smi->dev, "adjust link on CPU port (%d)\n", port); + + /* Force the fixed CPU port into 1Gbit mode, no autonegotiation */ + ret = regmap_update_bits(smi->map, RTL8366RB_MAC_FORCE_CTRL_REG, + BIT(port), BIT(port)); + if (ret) + return; + + ret = regmap_update_bits(smi->map, RTL8366RB_PAACR2, + 0xFF00U, + RTL8366RB_PAACR_CPU_PORT << 8); + if (ret) + return; + + /* Enable the CPU port */ + ret = regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port), + 0); + if (ret) + return; +} + +static void rb8366rb_set_port_led(struct realtek_smi *smi, + int port, bool enable) +{ + int ret; + u16 val = enable ? 0x3f : 0; + + if (smi->leds_disabled) + return; + + switch(port) { + case 0: + ret = regmap_update_bits(smi->map, + RTL8366RB_LED_0_1_CTRL_REG, + 0x3F, val); + break; + case 1: + ret = regmap_update_bits(smi->map, + RTL8366RB_LED_0_1_CTRL_REG, + 0x3F << RTL8366RB_LED_1_OFFSET, + val << RTL8366RB_LED_1_OFFSET); + break; + case 2: + ret = regmap_update_bits(smi->map, + RTL8366RB_LED_2_3_CTRL_REG, + 0x3F, val); + break; + case 3: + ret = regmap_update_bits(smi->map, + RTL8366RB_LED_2_3_CTRL_REG, + 0x3F << RTL8366RB_LED_3_OFFSET, + val << RTL8366RB_LED_3_OFFSET); + break; + case 4: + ret = regmap_update_bits(smi->map, + RTL8366RB_INTERRUPT_CONTROL_REG, + RTL8366RB_P4_RGMII_LED, + enable ? RTL8366RB_P4_RGMII_LED : 0); + break; + default: + dev_err(smi->dev, "no LED for port %d\n", port); + return; + } + if (ret) + return; + +} + +static int +rtl8366rb_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct realtek_smi *smi = ds->priv; + int ret; + + dev_info(smi->dev, "enable port %d\n", port); + ret = regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port), + 0); + if (ret) + return ret; + + rb8366rb_set_port_led(smi, port, true); + return 0; +} + +static void +rtl8366rb_port_disable(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct realtek_smi *smi = ds->priv; + int ret; + + dev_info(smi->dev, "disable port %d\n", port); + ret = regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port), + BIT(port)); + if (ret) + return; + + rb8366rb_set_port_led(smi, port, false); + return; +} + +static int rtl8366rb_get_vlan_4k(struct realtek_smi *smi, u32 vid, + struct rtl8366_vlan_4k *vlan4k) +{ + u32 data[3]; + int ret; + int i; + + memset(vlan4k, '\0', sizeof(struct rtl8366_vlan_4k)); + + if (vid >= RTL8366RB_NUM_VIDS) + return -EINVAL; + + /* write VID */ + ret = regmap_write(smi->map, RTL8366RB_VLAN_TABLE_WRITE_BASE, + vid & RTL8366RB_VLAN_VID_MASK); + if (ret) + return ret; + + /* write table access control word */ + ret = regmap_write(smi->map, RTL8366RB_TABLE_ACCESS_CTRL_REG, + RTL8366RB_TABLE_VLAN_READ_CTRL); + if (ret) + return ret; + + for (i = 0; i < 3; i++) { + ret = regmap_read(smi->map, + RTL8366RB_VLAN_TABLE_READ_BASE + i, + &data[i]); + if (ret) + return ret; + } + + vlan4k->vid = vid; + vlan4k->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) & + RTL8366RB_VLAN_UNTAG_MASK; + vlan4k->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK; + vlan4k->fid = data[2] & RTL8366RB_VLAN_FID_MASK; + + return 0; +} + +static int rtl8366rb_set_vlan_4k(struct realtek_smi *smi, + const struct rtl8366_vlan_4k *vlan4k) +{ + u32 data[3]; + int ret; + int i; + + if (vlan4k->vid >= RTL8366RB_NUM_VIDS || + vlan4k->member > RTL8366RB_VLAN_MEMBER_MASK || + vlan4k->untag > RTL8366RB_VLAN_UNTAG_MASK || + vlan4k->fid > RTL8366RB_FIDMAX) + return -EINVAL; + + data[0] = vlan4k->vid & RTL8366RB_VLAN_VID_MASK; + data[1] = (vlan4k->member & RTL8366RB_VLAN_MEMBER_MASK) | + ((vlan4k->untag & RTL8366RB_VLAN_UNTAG_MASK) << + RTL8366RB_VLAN_UNTAG_SHIFT); + data[2] = vlan4k->fid & RTL8366RB_VLAN_FID_MASK; + + for (i = 0; i < 3; i++) { + ret = regmap_write(smi->map, + RTL8366RB_VLAN_TABLE_WRITE_BASE + i, + data[i]); + if (ret) + return ret; + } + + /* write table access control word */ + ret = regmap_write(smi->map, RTL8366RB_TABLE_ACCESS_CTRL_REG, + RTL8366RB_TABLE_VLAN_WRITE_CTRL); + + return ret; +} + +static int rtl8366rb_get_vlan_mc(struct realtek_smi *smi, u32 index, + struct rtl8366_vlan_mc *vlanmc) +{ + u32 data[3]; + int ret; + int i; + + memset(vlanmc, '\0', sizeof(struct rtl8366_vlan_mc)); + + if (index >= RTL8366RB_NUM_VLANS) + return -EINVAL; + + for (i = 0; i < 3; i++) { + ret = regmap_read(smi->map, + RTL8366RB_VLAN_MC_BASE(index) + i, + &data[i]); + if (ret) + return ret; + } + + vlanmc->vid = data[0] & RTL8366RB_VLAN_VID_MASK; + vlanmc->priority = (data[0] >> RTL8366RB_VLAN_PRIORITY_SHIFT) & + RTL8366RB_VLAN_PRIORITY_MASK; + vlanmc->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) & + RTL8366RB_VLAN_UNTAG_MASK; + vlanmc->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK; + vlanmc->fid = data[2] & RTL8366RB_VLAN_FID_MASK; + + return 0; +} + +static int rtl8366rb_set_vlan_mc(struct realtek_smi *smi, u32 index, + const struct rtl8366_vlan_mc *vlanmc) +{ + u32 data[3]; + int ret; + int i; + + if (index >= RTL8366RB_NUM_VLANS || + vlanmc->vid >= RTL8366RB_NUM_VIDS || + vlanmc->priority > RTL8366RB_PRIORITYMAX || + vlanmc->member > RTL8366RB_VLAN_MEMBER_MASK || + vlanmc->untag > RTL8366RB_VLAN_UNTAG_MASK || + vlanmc->fid > RTL8366RB_FIDMAX) + return -EINVAL; + + data[0] = (vlanmc->vid & RTL8366RB_VLAN_VID_MASK) | + ((vlanmc->priority & RTL8366RB_VLAN_PRIORITY_MASK) << + RTL8366RB_VLAN_PRIORITY_SHIFT); + data[1] = (vlanmc->member & RTL8366RB_VLAN_MEMBER_MASK) | + ((vlanmc->untag & RTL8366RB_VLAN_UNTAG_MASK) << + RTL8366RB_VLAN_UNTAG_SHIFT); + data[2] = vlanmc->fid & RTL8366RB_VLAN_FID_MASK; + + for (i = 0; i < 3; i++) { + ret = regmap_write(smi->map, + RTL8366RB_VLAN_MC_BASE(index) + i, + data[i]); + if (ret) + return ret; + } + + return 0; +} + +static int rtl8366rb_get_mc_index(struct realtek_smi *smi, int port, int *val) +{ + u32 data; + int ret; + + if (port >= smi->num_ports) + return -EINVAL; + + ret = regmap_read(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port), + &data); + if (ret) + return ret; + + *val = (data >> RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)) & + RTL8366RB_PORT_VLAN_CTRL_MASK; + + return 0; + +} + +static int rtl8366rb_set_mc_index(struct realtek_smi *smi, int port, int index) +{ + if (port >= smi->num_ports || index >= RTL8366RB_NUM_VLANS) + return -EINVAL; + + return regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port), + RTL8366RB_PORT_VLAN_CTRL_MASK << + RTL8366RB_PORT_VLAN_CTRL_SHIFT(port), + (index & RTL8366RB_PORT_VLAN_CTRL_MASK) << + RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)); +} + +static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned vlan) +{ + unsigned max = RTL8366RB_NUM_VLANS; + + if (smi->vlan4k_enabled) + max = RTL8366RB_NUM_VIDS - 1; + + if (vlan == 0 || vlan >= max) + return false; + + return true; +} + +static int rtl8366rb_enable_vlan(struct realtek_smi *smi, bool enable) +{ + dev_info(smi->dev, "%s VLAN\n", enable ? "enable" : "disable"); + return regmap_update_bits(smi->map, RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN, + enable ? RTL8366RB_SGCR_EN_VLAN : 0); +} + +static int rtl8366rb_enable_vlan4k(struct realtek_smi *smi, bool enable) +{ + dev_info(smi->dev, "%s VLAN 4k\n", enable ? "enable" : "disable"); + return regmap_update_bits(smi->map, RTL8366RB_SGCR, + RTL8366RB_SGCR_EN_VLAN_4KTB, + enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0); +} + +static int rtl8366rb_phy_read(struct realtek_smi *smi, int phy, int regnum) +{ + u32 val; + u32 reg; + int ret; + + if (phy > RTL8366RB_PHY_NO_MAX) + return -EINVAL; + + ret = regmap_write(smi->map, RTL8366RB_PHY_ACCESS_CTRL_REG, + RTL8366RB_PHY_CTRL_READ); + if (ret) + return ret; + + reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum; + + ret = regmap_write(smi->map, reg, 0); + if (ret) { + dev_err(smi->dev, + "failed to write PHY%d reg %04x @ %04x, ret %d\n", + phy, regnum, reg, ret); + return ret; + } + + ret = regmap_read(smi->map, RTL8366RB_PHY_ACCESS_DATA_REG, &val); + if (ret) + return ret; + + dev_dbg(smi->dev, "read PHY%d register 0x%04x @ %08x, val <- %04x\n", + phy, regnum, reg, val); + + return val; +} + +static int rtl8366rb_phy_write(struct realtek_smi *smi, int phy, int regnum, + u16 val) +{ + u32 reg; + int ret; + + if (phy > RTL8366RB_PHY_NO_MAX) + return -EINVAL; + + ret = regmap_write(smi->map, RTL8366RB_PHY_ACCESS_CTRL_REG, + RTL8366RB_PHY_CTRL_WRITE); + if (ret) + return ret; + + reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum; + + dev_dbg(smi->dev, "write PHY%d register 0x%04x @ %04x, val -> %04x\n", + phy, regnum, reg, val); + + ret = regmap_write(smi->map, reg, val); + if (ret) + return ret; + + return 0; +} + +static int rtl8366rb_reset_chip(struct realtek_smi *smi) +{ + int timeout = 10; + u32 val; + int ret; + + realtek_smi_write_reg_noack(smi, RTL8366RB_RESET_CTRL_REG, + RTL8366RB_CHIP_CTRL_RESET_HW); + do { + msleep(1); + ret = regmap_read(smi->map, RTL8366RB_RESET_CTRL_REG, &val); + if (ret) + return ret; + + if (!(val & RTL8366RB_CHIP_CTRL_RESET_HW)) + break; + } while (--timeout); + + if (!timeout) { + dev_err(smi->dev, "timeout waiting for the switch to reset\n"); + return -EIO; + } + + return 0; +} + +static int rtl8366rb_detect(struct realtek_smi *smi) +{ + struct device *dev = smi->dev; + int ret; + u32 val; + + /* Detect device */ + ret = regmap_read(smi->map, 0x5c, &val); + if (ret) { + dev_err(dev, "can't get chip ID (%d)\n", ret); + return ret; + } + + switch(val) { + case 0x6027: + dev_info(dev, "found an RTL8366S switch\n"); + dev_err(dev, "this switch is not yet supported, submit patches!\n"); + return -ENODEV; + break; + case 0x5937: + dev_info(dev, "found an RTL8366RB switch\n"); + smi->cpu_port = RTL8366RB_PORT_NUM_CPU; + smi->num_ports = RTL8366RB_NUM_PORTS; + smi->num_vlan_mc = RTL8366RB_NUM_VLANS; + smi->mib_counters = rtl8366rb_mib_counters; + smi->num_mib_counters = ARRAY_SIZE(rtl8366rb_mib_counters); + break; + default: + dev_info(dev, "found an Unknown Realtek switch (id=0x%04x)\n", + val); + break; + } + + ret = rtl8366rb_reset_chip(smi); + if (ret) + return ret; + + return 0; +} + +static const struct dsa_switch_ops rtl8366rb_switch_ops = { + .get_tag_protocol = rtl8366_get_tag_protocol, + .setup = rtl8366rb_setup, + .adjust_link = rtl8366rb_adjust_link, + .get_strings = rtl8366_get_strings, + .get_ethtool_stats = rtl8366_get_ethtool_stats, + .get_sset_count = rtl8366_get_sset_count, + .port_vlan_filtering = rtl8366_vlan_filtering, + .port_vlan_prepare = rtl8366_vlan_prepare, + .port_vlan_add = rtl8366_vlan_add, + .port_vlan_del = rtl8366_vlan_del, + .port_enable = rtl8366rb_port_enable, + .port_disable = rtl8366rb_port_disable, +}; + +static const struct realtek_smi_ops rtl8366rb_smi_ops = { + .detect = rtl8366rb_detect, + .get_vlan_mc = rtl8366rb_get_vlan_mc, + .set_vlan_mc = rtl8366rb_set_vlan_mc, + .get_vlan_4k = rtl8366rb_get_vlan_4k, + .set_vlan_4k = rtl8366rb_set_vlan_4k, + .get_mc_index = rtl8366rb_get_mc_index, + .set_mc_index = rtl8366rb_set_mc_index, + .get_mib_counter = rtl8366rb_get_mib_counter, + .is_vlan_valid = rtl8366rb_is_vlan_valid, + .enable_vlan = rtl8366rb_enable_vlan, + .enable_vlan4k = rtl8366rb_enable_vlan4k, + .phy_read = rtl8366rb_phy_read, + .phy_write = rtl8366rb_phy_write, +}; + +const struct realtek_smi_variant rtl8366rb_variant = { + .ds_ops = &rtl8366rb_switch_ops, + .ops = &rtl8366rb_smi_ops, + .clk_delay = 10, + .cmd_read = 0xa9, + .cmd_write = 0xa8, +}; +EXPORT_SYMBOL_GPL(rtl8366rb_variant); diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 21624d1c9d38..ae50248ff1a7 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -40,6 +40,7 @@ #define RTL8366RB_POWER_SAVE 0x21 #define RTL8366RB_POWER_SAVE_ON 0x1000 + MODULE_DESCRIPTION("Realtek PHY driver"); MODULE_AUTHOR("Johnson Leung"); MODULE_LICENSE("GPL"); From patchwork Mon May 28 17:47:52 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 137109 Delivered-To: patch@linaro.org Received: by 2002:a2e:9706:0:0:0:0:0 with SMTP id r6-v6csp3104033lji; Mon, 28 May 2018 10:51:54 -0700 (PDT) X-Google-Smtp-Source: AB8JxZqQCiIS6dXeEq72LmnCa87h/hjj9AeRGeJZyE6Fl9lEZ20NycfuQI0AJwePF2kv/doYh8Tn X-Received: by 2002:a65:5308:: with SMTP id m8-v6mr11610309pgq.42.1527529914866; Mon, 28 May 2018 10:51:54 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1527529914; cv=none; d=google.com; s=arc-20160816; b=FsBdK90aJ7THW2QUnVPd8r4E2z9CEjbN40xsfcwd7Lw9YR0JjuewifAzx+37nb3FT3 3pP/6luejv6zGorHYTRm5MxjaN86ygVAJNusLIqZhOK0Mkjq9DmJ/Xad/vWEVoaIOZIi 0/1O64xCiS2eT+kyBWBrZshDldIRB9+ScLoc0hi0M171bkybOaWTJeeJiOATrt6PqZqP tQrudGK80NP5sWAD7R2QQhHyL1tP624sfgLfXcgYjS90lsD2jADbaM8lxU0aXKA0Zref 3W3/jrTumopRVEelLE+2v/kNfm6NJddI5ziVVbke1/zlvLUQCts8c2x3Bxg5jHvrbdiP P/Gg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:dkim-signature:arc-authentication-results; bh=dNKgnT31MpbL5y1Ktyw40QH3EYJIW6F8B5Qujk/z2jo=; b=TtatXr7cMcpl1KucuayGi29SK6qCeNiED+dIF/G4pkW/GVm1HYMfJFg0gNWGRcPf3Y UvXS3vhRZvQJXMaZsxch61CVjQYkSjHNIvWCRD08SMe342Zlb9mRiSm+99PxAOsTIzvD x66MfSKSI/k4ElLMv6faVV2ALx4M1KvqDfQJZW6lHh8KY9tQ8CPqEjxw2zweet1LcwOZ MNmv81ER9TNbmU3+KJD0x2ZpylnrjLWlR9KRUERAbkAeav9OMq0xGMmAj0e7XPV2kDmJ sS8wMOuRIHSD9HNCEXC64KGNneYgSlRORKwqX7N8nxWQYxl1u76IbCqyMGb+mgjPVf7l UBvw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=dtX/Dixr; spf=pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=netdev-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id f1-v6si30508755pld.3.2018.05.28.10.51.54; Mon, 28 May 2018 10:51:54 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=dtX/Dixr; spf=pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=netdev-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755607AbeE1Rvv (ORCPT + 9 others); Mon, 28 May 2018 13:51:51 -0400 Received: from mail-wm0-f67.google.com ([74.125.82.67]:51486 "EHLO mail-wm0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754631AbeE1Rvs (ORCPT ); Mon, 28 May 2018 13:51:48 -0400 Received: by mail-wm0-f67.google.com with SMTP id r15-v6so6406239wmc.1 for ; Mon, 28 May 2018 10:51:47 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=dNKgnT31MpbL5y1Ktyw40QH3EYJIW6F8B5Qujk/z2jo=; b=dtX/DixrL1gcWct1Z1B6FuiU+fmSG8F6HToqDqP6b9LFfU9xlX3f3+/rVE+E7a7UsC 9/rHopQMdBsgbLZEf85UlTuLVGCJaSV+2M8f0lb0fK8Wa6AsrGWHgC0/23v7U9/wv3Dm j22H3UXZ5ZNtAmiBm02ypQgVThaSoOHigyPuw= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=dNKgnT31MpbL5y1Ktyw40QH3EYJIW6F8B5Qujk/z2jo=; b=Mgpe1s6BUcmGkn6WxitK5f8oVgMAAaIh9v9aKtG9LsP1v1VoX7bzx00K4qo2QB3xOK ulCnI8aYZAfQf50xIYm6gp1+d5KBJ/zNp6Wkl93DN/7bvNcrzr5jVy5s3EontcuihJc/ WfDnh2KFKrgJEC9M4bVsjXokGkBqKX1jF9gqEBcIfn51TGCHBTAkvkEiHgf7IcLUFPuq bEjaBbRNCYwD+StqdefaQ6DZGveVsKEG9h2lbkxkvHpkOIF0rIkLuQsCyMuQCMJ6PKZb DrnsMBLT2wJv8R1t4M6jFntbPUiqFofz4/zqXiLQNUAYVSv079Lb2QSFeFdWN3YzgfTm WChw== X-Gm-Message-State: ALKqPwdJP9NXnrVHDAinCjpa+s3nU3H+zEwwSbQWTsUFB/undKGqz65v JDDAIQd0z9Zg/o0L1aPzTae7sgbXc+A= X-Received: by 2002:a2e:1b52:: with SMTP id b79-v6mr8896209ljb.134.1527529906776; Mon, 28 May 2018 10:51:46 -0700 (PDT) Received: from localhost.localdomain (c-ae7b71d5.014-348-6c756e10.bbcust.telenor.se. [213.113.123.174]) by smtp.gmail.com with ESMTPSA id p76-v6sm6913861lfp.44.2018.05.28.10.51.44 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Mon, 28 May 2018 10:51:45 -0700 (PDT) From: Linus Walleij To: Andrew Lunn , Vivien Didelot , Florian Fainelli Cc: netdev@vger.kernel.org, openwrt-devel@lists.openwrt.org, LEDE Development List , Linus Walleij Subject: [PATCH 4/4 RFCv2] ARM: dts: Add ethernet and switch to D-Link DIR-685 Date: Mon, 28 May 2018 19:47:52 +0200 Message-Id: <20180528174752.6806-5-linus.walleij@linaro.org> X-Mailer: git-send-email 2.17.0 In-Reply-To: <20180528174752.6806-1-linus.walleij@linaro.org> References: <20180528174752.6806-1-linus.walleij@linaro.org> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org This adds the Ethernet and Realtek switch device to the D-Link DIR-685 Gemini-based device. Signed-off-by: Linus Walleij --- ChangeLog RFCv1->RFCv2 - Rebased, use the new DT bindings --- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 153 ++++++++++++++++++++- 1 file changed, 152 insertions(+), 1 deletion(-) -- 2.17.0 diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index fb5c954ab95a..ccbe03c05c2a 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -156,6 +156,100 @@ }; }; + /* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */ + switch { + compatible = "realtek,rtl8366rb"; + /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */ + mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; + mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + realtek,disable-leds; + + switch_intc: interrupt-controller { + /* GPIO 15 provides the interrupt */ + interrupt-parent = <&gpio0>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + phy-handle = <&phy0>; + }; + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&phy1>; + }; + port@2 { + reg = <2>; + label = "lan2"; + phy-handle = <&phy2>; + }; + port@3 { + reg = <3>; + label = "lan3"; + phy-handle = <&phy3>; + }; + port@4 { + reg = <4>; + label = "wan"; + phy-handle = <&phy4>; + }; + rtl8366rb_cpu_port: port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + }; + + mdio { + compatible = "realtek,smi-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy0: phy@0 { + reg = <0>; + interrupt-parent = <&switch_intc>; + interrupts = <0>; + }; + phy1: phy@1 { + reg = <1>; + interrupt-parent = <&switch_intc>; + interrupts = <1>; + }; + phy2: phy@2 { + reg = <2>; + interrupt-parent = <&switch_intc>; + interrupts = <2>; + }; + phy3: phy@3 { + reg = <3>; + interrupt-parent = <&switch_intc>; + interrupts = <3>; + }; + phy4: phy@4 { + reg = <4>; + interrupt-parent = <&switch_intc>; + interrupts = <12>; + }; + }; + }; + soc { flash@30000000 { /* @@ -223,10 +317,12 @@ * gpio0bgrp cover line 7 used by WPS LED * gpio0cgrp cover line 8, 13 used by keys * and 11, 12 used by the HD LEDs + * and line 14, 15 used by RTL8366 + * RESET and phy ready * gpio0egrp cover line 16 used by VDISP * gpio0fgrp cover line 17 used by TK IRQ * gpio0ggrp cover line 20 used by panel CS - * gpio0hgrp cover line 21,22 used by RTL8366RB + * gpio0hgrp cover line 21,22 used by RTL8366RB MDIO */ gpio0_default_pins: pinctrl-gpio0 { mux { @@ -250,6 +346,49 @@ groups = "gpio1bgrp"; }; }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp"; + }; + conf0 { + pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV"; + skew-delay = <0>; + }; + conf1 { + pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC"; + skew-delay = <15>; + }; + conf2 { + pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN"; + skew-delay = <7>; + }; + conf3 { + pins = "U8 GMAC0 TXC"; + skew-delay = <11>; + }; + conf4 { + pins = "V11 GMAC1 TXC"; + skew-delay = <10>; + }; + conf5 { + /* The data lines all have default skew */ + pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1", + "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3", + "T7 GMAC0 TXD0", "U6 GMAC0 TXD1", + "V7 GMAC0 TXD2", "U7 GMAC0 TXD3", + "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1", + "T11 GMAC1 RXD2", "W12 GMAC1 RXD3", + "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1", + "W10 GMAC1 TXD2", "T9 GMAC1 TXD3"; + skew-delay = <7>; + }; + /* Set up drive strength on GMAC0 to 16 mA */ + conf6 { + groups = "gmii_gmac0_grp"; + drive-strength = <16>; + }; + }; }; }; @@ -291,6 +430,18 @@ <0x6000 0 0 4 &pci_intc 2>; }; + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&rtl8366rb_cpu_port>; + }; + ethernet-port@1 { + /* Not used in this platform */ + }; + }; + ata@63000000 { status = "okay"; };