From patchwork Sun Aug 22 19:31:39 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Alvin_=C5=A0ipraga?= X-Patchwork-Id: 501759 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.5 required=3.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id E0732C43216 for ; Sun, 22 Aug 2021 19:32:47 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id C05F96127B for ; Sun, 22 Aug 2021 19:32:47 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232830AbhHVTd1 (ORCPT ); Sun, 22 Aug 2021 15:33:27 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56202 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232799AbhHVTdZ (ORCPT ); Sun, 22 Aug 2021 15:33:25 -0400 Received: from mail-ed1-x534.google.com (mail-ed1-x534.google.com [IPv6:2a00:1450:4864:20::534]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id AB12EC061757 for ; Sun, 22 Aug 2021 12:32:43 -0700 (PDT) Received: by mail-ed1-x534.google.com with SMTP id s25so10064181edw.0 for ; Sun, 22 Aug 2021 12:32:43 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=pqrs.dk; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=t/57/7Ra/e8dihd9Z1Y6uUjnPgEzQmajUXKvHAVuv2o=; b=KskLkgGD8JaNGD7ASOLh1s3nv+GQU/By7BGMuPpogHKd98UmycDTDIp+JL52TOseZj KSonxBFgsSDlnwdUFw/bXEAZ59NcjEBqJoaEqYuTTyfRL1rfM98dcAKuqwUcuCwcgl1J PN4qN2J1RbDUKZofcxhYZEYxXW+OIFtDC5Mkg= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=t/57/7Ra/e8dihd9Z1Y6uUjnPgEzQmajUXKvHAVuv2o=; b=qdifO8z5gzPEl4OzEcNAtB2Itj48VvQtA7wVPxtsiOWfpPXo8xu3/F1CJuY1gcYgim zk/YQYoCR7Cy/ykbVtkL8vpcOnsKcdTrTxCPVIrZb6gKcn7tj6j8YSznrYJKOU0KrVOy Nev8BPB/CkC3oLzA1g3mw2bul8op7uFuUXPM4FyqvjqcsAEpqWleFCAQ8i53S4Ut14Tu cu5mPpTp55eIcXPOY6gpbHvg7XRf+Qx5JNKjjLT+nA9jMukvbJzvKMqaJVlz4CXrsRG9 IISM6m3wDXbp7j6ceZyhjjTmtZ2iF2DAvybATwip+NvV3YdjxACnF89IkQw2OOY/toZ2 /PVw== X-Gm-Message-State: AOAM531StRER3mhNbmYIclMwTgE8+7NbDk8DByExXS2PDJCeIC1nSZlP u2PxnTNKjVWFC89RGs1gLXaKdw== X-Google-Smtp-Source: ABdhPJyOalP5cgOvTIbjQBcjni7YYpjDwoLN4S5AIgJBwrMoFXLDQal+RH27EMs/BQI8kdNO20bI5g== X-Received: by 2002:a05:6402:4406:: with SMTP id y6mr32848397eda.242.1629660762281; Sun, 22 Aug 2021 12:32:42 -0700 (PDT) Received: from capella.. (80.71.142.18.ipv4.parknet.dk. [80.71.142.18]) by smtp.gmail.com with ESMTPSA id cn16sm7780053edb.9.2021.08.22.12.32.41 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 22 Aug 2021 12:32:41 -0700 (PDT) From: =?utf-8?q?Alvin_=C5=A0ipraga?= To: Linus Walleij , Andrew Lunn , Vivien Didelot , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Jakub Kicinski , Rob Herring , Heiner Kallweit , Russell King Cc: mir@bang-olufsen.dk, alvin@pqrs.dk, =?utf-8?q?Alvin_=C5=A0ipraga?= , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [RFC PATCH net-next 1/5] net: dsa: realtek-smi: fix mdio_free bug on module unload Date: Sun, 22 Aug 2021 21:31:39 +0200 Message-Id: <20210822193145.1312668-2-alvin@pqrs.dk> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20210822193145.1312668-1-alvin@pqrs.dk> References: <20210822193145.1312668-1-alvin@pqrs.dk> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org From: Alvin Šipraga realtek-smi-core fails to unregister the slave MII bus on module unload, raising the following BUG warning: mdio_bus.c:650: BUG_ON(bus->state != MDIOBUS_UNREGISTERED); kernel BUG at drivers/net/phy/mdio_bus.c:650! Internal error: Oops - BUG: 0 [#1] PREEMPT_RT SMP Call trace: mdiobus_free+0x4c/0x50 devm_mdiobus_free+0x18/0x20 release_nodes.isra.0+0x1c0/0x2b0 devres_release_all+0x38/0x58 device_release_driver_internal+0x124/0x1e8 driver_detach+0x54/0xe0 bus_remove_driver+0x60/0xd8 driver_unregister+0x34/0x60 platform_driver_unregister+0x18/0x20 realtek_smi_driver_exit+0x14/0x1c [realtek_smi] Fix this by duly unregistering the slave MII bus with mdiobus_unregister. We do this in the DSA teardown path, since registration is performed in the DSA setup path. Cc: Linus Walleij Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Alvin Šipraga --- drivers/net/dsa/realtek-smi-core.c | 6 ++++++ drivers/net/dsa/realtek-smi-core.h | 1 + drivers/net/dsa/rtl8366rb.c | 8 ++++++++ 3 files changed, 15 insertions(+) diff --git a/drivers/net/dsa/realtek-smi-core.c b/drivers/net/dsa/realtek-smi-core.c index 8e49d4f85d48..6992b6b31db6 100644 --- a/drivers/net/dsa/realtek-smi-core.c +++ b/drivers/net/dsa/realtek-smi-core.c @@ -383,6 +383,12 @@ int realtek_smi_setup_mdio(struct realtek_smi *smi) return ret; } +void realtek_smi_teardown_mdio(struct realtek_smi *smi) +{ + if (smi->slave_mii_bus) + mdiobus_unregister(smi->slave_mii_bus); +} + static int realtek_smi_probe(struct platform_device *pdev) { const struct realtek_smi_variant *var; diff --git a/drivers/net/dsa/realtek-smi-core.h b/drivers/net/dsa/realtek-smi-core.h index fcf465f7f922..6cfa5f2df7ea 100644 --- a/drivers/net/dsa/realtek-smi-core.h +++ b/drivers/net/dsa/realtek-smi-core.h @@ -119,6 +119,7 @@ struct realtek_smi_variant { int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr, u32 data); int realtek_smi_setup_mdio(struct realtek_smi *smi); +void realtek_smi_teardown_mdio(struct realtek_smi *smi); /* RTL8366 library helpers */ int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used); diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c index a89093bc6c6a..6537fac7aba4 100644 --- a/drivers/net/dsa/rtl8366rb.c +++ b/drivers/net/dsa/rtl8366rb.c @@ -982,6 +982,13 @@ static int rtl8366rb_setup(struct dsa_switch *ds) return 0; } +static void rtl8366rb_teardown(struct dsa_switch *ds) +{ + struct realtek_smi *smi = ds->priv; + + realtek_smi_teardown_mdio(smi); +} + static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds, int port, enum dsa_tag_protocol mp) @@ -1505,6 +1512,7 @@ static int rtl8366rb_detect(struct realtek_smi *smi) static const struct dsa_switch_ops rtl8366rb_switch_ops = { .get_tag_protocol = rtl8366_get_tag_protocol, .setup = rtl8366rb_setup, + .teardown = rtl8366rb_teardown, .phylink_mac_link_up = rtl8366rb_mac_link_up, .phylink_mac_link_down = rtl8366rb_mac_link_down, .get_strings = rtl8366_get_strings, From patchwork Sun Aug 22 19:31:40 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Alvin_=C5=A0ipraga?= X-Patchwork-Id: 501477 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.5 required=3.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2FE28C4320A for ; Sun, 22 Aug 2021 19:32:50 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 1490361267 for ; Sun, 22 Aug 2021 19:32:50 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233049AbhHVTda (ORCPT ); Sun, 22 Aug 2021 15:33:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56228 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232973AbhHVTd2 (ORCPT ); Sun, 22 Aug 2021 15:33:28 -0400 Received: from mail-ej1-x62c.google.com (mail-ej1-x62c.google.com [IPv6:2a00:1450:4864:20::62c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 42DAEC061575 for ; Sun, 22 Aug 2021 12:32:47 -0700 (PDT) Received: by mail-ej1-x62c.google.com with SMTP id e21so16333110ejz.12 for ; Sun, 22 Aug 2021 12:32:47 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=pqrs.dk; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=fV/T5HnNhSBhhXcySBbbcTxkKppswGm9K3h/snIx9Z0=; b=kFO76eGVYd9WPNeE1lTiO9yiZxPnKWhENPZsb+o6G9fxksSdEfg+N903JrKIIWUOOJ mWd1lP8UBtsTaBgZgvGCpOwwbq7ypzpnb5cm80rWKAUHy6SZeRKCjKrGmxNnzoBcNUQh mmyit038BxR6l8RAEjI1+/V15Av2SCvnfrVgk= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=fV/T5HnNhSBhhXcySBbbcTxkKppswGm9K3h/snIx9Z0=; b=b16b6DFrWim+8YVEDpKDLSeEe/DeGfhvGxtrlFkrIpYyrRmmqyvu9iQgdfbOJswAqG yx8k+qWLdtITd48y2C21cwgV04IEU2ce6y2JYFBV+jhXXXBid9IZU9QM92Gp1nih0DuL jF4MvJmuvxtT62AvD8mL1FC9Djbos6gbqkZsKjvHdqTckwnCg5EdIl5jFgM+GiD25Ti7 mPw4RnErKaXEgS0pwx+WCrR3sxKdfsqZhd/b8Ss3W/scGHHaQmC3M2FfWamYKf9NoU84 8mLgPBiPnHrBI0sZ9b3sHrcmbtae4U9TaFN7AX4iIiiWmPWI5tT86VIrUMKy+L7/bR/n 17sw== X-Gm-Message-State: AOAM5321MHA9Jbf/8BJXXtFY/dqa1huczbIVaov7y50vMRcueAsb0mw1 S62Qe/NowXU6o/8ef8ouA/8DLw== X-Google-Smtp-Source: ABdhPJzK/1xXINX2sPeplqjfZO2Wrnr7H5f3Vf0x5xtgOZ60AYVxvbHdkHQxIRpnqNjaV6yKj9SchQ== X-Received: by 2002:a17:907:1750:: with SMTP id lf16mr32300126ejc.242.1629660765853; Sun, 22 Aug 2021 12:32:45 -0700 (PDT) Received: from capella.. (80.71.142.18.ipv4.parknet.dk. [80.71.142.18]) by smtp.gmail.com with ESMTPSA id cn16sm7780053edb.9.2021.08.22.12.32.44 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 22 Aug 2021 12:32:45 -0700 (PDT) From: =?utf-8?q?Alvin_=C5=A0ipraga?= To: Linus Walleij , Andrew Lunn , Vivien Didelot , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Jakub Kicinski , Rob Herring , Heiner Kallweit , Russell King Cc: mir@bang-olufsen.dk, alvin@pqrs.dk, =?utf-8?q?Alvin_=C5=A0ipraga?= , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [RFC PATCH net-next 2/5] dt-bindings: net: dsa: realtek-smi: document new compatible rtl8365mb Date: Sun, 22 Aug 2021 21:31:40 +0200 Message-Id: <20210822193145.1312668-3-alvin@pqrs.dk> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20210822193145.1312668-1-alvin@pqrs.dk> References: <20210822193145.1312668-1-alvin@pqrs.dk> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org From: Alvin Šipraga rtl8365mb is a new realtek-smi subdriver for the RTL8365MB-VC 4+1 port 10/100/1000M Ethernet switch controller. Its compatible string is "realtek,rtl8365mb". Signed-off-by: Alvin Šipraga Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Reviewed-by: Linus Walleij --- Documentation/devicetree/bindings/net/dsa/realtek-smi.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt index b6ae8541bd55..ee03eb40a488 100644 --- a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt +++ b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt @@ -9,6 +9,7 @@ SMI-based Realtek devices. Required properties: - compatible: must be exactly one of: + "realtek,rtl8365mb" (4+1 ports) "realtek,rtl8366" "realtek,rtl8366rb" (4+1 ports) "realtek,rtl8366s" (4+1 ports) From patchwork Sun Aug 22 19:31:41 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Alvin_=C5=A0ipraga?= X-Patchwork-Id: 501758 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.5 required=3.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 81BCFC432BE for ; Sun, 22 Aug 2021 19:32:54 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 69FC561267 for ; Sun, 22 Aug 2021 19:32:54 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233029AbhHVTde (ORCPT ); Sun, 22 Aug 2021 15:33:34 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56256 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233084AbhHVTdc (ORCPT ); Sun, 22 Aug 2021 15:33:32 -0400 Received: from mail-ej1-x635.google.com (mail-ej1-x635.google.com [IPv6:2a00:1450:4864:20::635]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D5238C061757 for ; Sun, 22 Aug 2021 12:32:50 -0700 (PDT) Received: by mail-ej1-x635.google.com with SMTP id me10so3886964ejb.11 for ; Sun, 22 Aug 2021 12:32:50 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=pqrs.dk; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=VZoZHtRNTp7KXjk92qz01l5pq8krL3wvedBpvs7B8JA=; b=TU2s3vBJbD5IYwtDvBIL6YuWtIuB7ap5DrYt5uEt77TDoQJ7XG0sCgbotlhMrdxPWw u5m358LjovIL3q6Yk7vAiSj2cg03+65/TPRCc5MMPcshyFcxEe9PJ7JfI7VCfdsVUmUs 9JE8akDkOtYj7ioaqbQSQ4UGclV8uF3OjDTlI= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=VZoZHtRNTp7KXjk92qz01l5pq8krL3wvedBpvs7B8JA=; b=YiitHUmDK7Em90IPySfFQmpodqBDmnIe68rW5xfgvDHaiBEc0ZvudsY05hbeRsbOGP alF6IU8d/68CTqbnGW0CuCLbx5c24rTX9HdfgG0VpqKdn2zGsXQZx7lY7iC2vSjSwkZt mzyFpDOSknVSXO9RFNwCVVVP8qLaAHoUM7zpdajZ/ck1IALM7gi+WPnS2IDIp8eyjquD md939R2hMbKnaH/nWhrZ3CYya3sRKa3FlYoMS7wWiJPiZWdBmiprWt4LiXX3JcekdY2/ LVaGyFzvesoKSKUh+7Qrs7iemCkXWxs7ABUGSCxcpNGW+UmjkDeteBNCYTdIKx9UJ8nL Fz4A== X-Gm-Message-State: AOAM531S5FK51ubqA01sx/JkHuXcozeNZQKH2P2c8k5Uf56hRGfW3Hct A2I9fkTiRCA6NnhGttj0Lj1lfg== X-Google-Smtp-Source: ABdhPJwWyDbPcNqFZSeMySJ7ItU7FY79AZKjz5xMLAegiEFU97IB0eixJaQ/tDR3qEMlEhjpMnDiAg== X-Received: by 2002:a17:906:2a8e:: with SMTP id l14mr31757444eje.321.1629660769400; Sun, 22 Aug 2021 12:32:49 -0700 (PDT) Received: from capella.. (80.71.142.18.ipv4.parknet.dk. [80.71.142.18]) by smtp.gmail.com with ESMTPSA id cn16sm7780053edb.9.2021.08.22.12.32.48 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 22 Aug 2021 12:32:48 -0700 (PDT) From: =?utf-8?q?Alvin_=C5=A0ipraga?= To: Linus Walleij , Andrew Lunn , Vivien Didelot , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Jakub Kicinski , Rob Herring , Heiner Kallweit , Russell King Cc: mir@bang-olufsen.dk, alvin@pqrs.dk, =?utf-8?q?Alvin_=C5=A0ipraga?= , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [RFC PATCH net-next 3/5] net: dsa: tag_rtl8_4: add realtek 8 byte protocol 4 tag Date: Sun, 22 Aug 2021 21:31:41 +0200 Message-Id: <20210822193145.1312668-4-alvin@pqrs.dk> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20210822193145.1312668-1-alvin@pqrs.dk> References: <20210822193145.1312668-1-alvin@pqrs.dk> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org From: Alvin Šipraga This commit implements a basic version of the 8 byte tag protocol used in the Realtek RTL8365MB-VC switch, which carries with it a protocol version of 0x04. The implementation itself only handles the parsing of the EtherType value and Realtek protocol version, together with the source or destination port fields. The rest is left unimplemented for now. The tag format is described in a confidential document provided to my employer - Bang & Olufsen a/s - by Realtek Semiconductor Corp. Permission has been granted by Realtek to publish this driver based on that material, together with an extract from the document describing the tag format and its fields. It is hoped that this will help future implementors who do not have access to the material but who wish to extend the functionality of drivers for chips which use this protocol. Signed-off-by: Alvin Šipraga --- include/net/dsa.h | 2 + net/dsa/Kconfig | 6 ++ net/dsa/Makefile | 1 + net/dsa/tag_rtl8_4.c | 178 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 187 insertions(+) create mode 100644 net/dsa/tag_rtl8_4.c diff --git a/include/net/dsa.h b/include/net/dsa.h index 0c2cba45fa79..6d8b5a11d99a 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -51,6 +51,7 @@ struct phylink_link_state; #define DSA_TAG_PROTO_SEVILLE_VALUE 21 #define DSA_TAG_PROTO_BRCM_LEGACY_VALUE 22 #define DSA_TAG_PROTO_SJA1110_VALUE 23 +#define DSA_TAG_PROTO_RTL8_4_VALUE 24 enum dsa_tag_protocol { DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE, @@ -77,6 +78,7 @@ enum dsa_tag_protocol { DSA_TAG_PROTO_OCELOT_8021Q = DSA_TAG_PROTO_OCELOT_8021Q_VALUE, DSA_TAG_PROTO_SEVILLE = DSA_TAG_PROTO_SEVILLE_VALUE, DSA_TAG_PROTO_SJA1110 = DSA_TAG_PROTO_SJA1110_VALUE, + DSA_TAG_PROTO_RTL8_4 = DSA_TAG_PROTO_RTL8_4_VALUE, }; struct dsa_switch; diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig index 548285539752..470a2f3e8f75 100644 --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -99,6 +99,12 @@ config NET_DSA_TAG_RTL4_A Realtek switches with 4 byte protocol A tags, sich as found in the Realtek RTL8366RB. +config NET_DSA_TAG_RTL8_4 + tristate "Tag driver for Realtek 8 byte protocol 4 tags" + help + Say Y or M if you want to enable support for tagging frames for Realtek + switches with 8 byte protocol 4 tags, such as the Realtek RTL8365MB-VC. + config NET_DSA_TAG_OCELOT tristate "Tag driver for Ocelot family of switches, using NPI port" depends on MSCC_OCELOT_SWITCH_LIB || \ diff --git a/net/dsa/Makefile b/net/dsa/Makefile index 67ea009f242c..01282817e80e 100644 --- a/net/dsa/Makefile +++ b/net/dsa/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_NET_DSA_TAG_GSWIP) += tag_gswip.o obj-$(CONFIG_NET_DSA_TAG_HELLCREEK) += tag_hellcreek.o obj-$(CONFIG_NET_DSA_TAG_KSZ) += tag_ksz.o obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o +obj-$(CONFIG_NET_DSA_TAG_RTL8_4) += tag_rtl8_4.o obj-$(CONFIG_NET_DSA_TAG_LAN9303) += tag_lan9303.o obj-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o obj-$(CONFIG_NET_DSA_TAG_OCELOT) += tag_ocelot.o diff --git a/net/dsa/tag_rtl8_4.c b/net/dsa/tag_rtl8_4.c new file mode 100644 index 000000000000..1082bafb6a2e --- /dev/null +++ b/net/dsa/tag_rtl8_4.c @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Handler for Realtek 8 byte switch tags + * + * Copyright (C) 2021 Alvin Šipraga + * + * NOTE: Currently only supports protocol "4" found in the RTL8365MB, hence + * named tag_rtl8_4. + * + * This "proprietary tag" header has the following format: + * + * ------------------------------------------- + * | MAC DA | MAC SA | 8 byte tag | Type | ... + * ------------------------------------------- + * _______________/ \______________________________________ + * / \ + * 0 7|8 15 + * |-----------------------------------+-----------------------------------|--- + * | (16-bit) | ^ + * | Realtek EtherType [0x8899] | | + * |-----------------------------------+-----------------------------------| 8 + * | (8-bit) | (8-bit) | + * | Protocol [0x04] | REASON | b + * |-----------------------------------+-----------------------------------| y + * | (1) | (1) | (2) | (1) | (3) | (1) | (1) | (1) | (5) | t + * | FID_EN | X | FID | PRI_EN | PRI | KEEP | X | LEARN_DIS | X | e + * |-----------------------------------+-----------------------------------| s + * | (1) | (15-bit) | | + * | ALLOW | TX/RX | v + * |-----------------------------------+-----------------------------------|--- + * + * With the following field descriptions: + * + * field | description + * ------------+------------- + * Realtek | 0x8899: indicates that this is a proprietary Realtek tag; + * EtherType | note that Realtek uses the same EtherType for + * | other incompatible tag formats (e.g. tag_rtl4_a.c) + * Protocol | 0x04: indicates that this tag conforms to this format + * X | reserved + * ------------+------------- + * REASON | reason for forwarding packet to CPU + * FID_EN | 1: packet has an FID + * | 0: no FID + * FID | FID of packet (if FID_EN=1) + * PRI_EN | 1: force priority of packet + * | 0: don't force priority + * PRI | priority of packet (if PRI_EN=1) + * KEEP | preserve packet VLAN tag format + * LEARN_DIS | don't learn the source MAC address of the packet + * ALLOW | 1: treat TX/RX field as an allowance port mask, meaning the + * | packet may only be forwarded to ports specified in the + * | mask + * | 0: no allowance port mask, TX/RX field is the forwarding + * | port mask + * TX/RX | TX (switch->CPU): port number the packet was received on + * | RX (CPU->switch): forwarding port mask (if ALLOW=0) + * | allowance port mask (if ALLOW=1) + */ + +#include +#include + +#include "dsa_priv.h" + +#define RTL8_4_TAG_LEN 8 +#define RTL8_4_ETHERTYPE 0x8899 +/* 0x04 = RTL8365MB DSA protocol + */ +#define RTL8_4_PROTOCOL_RTL8365MB 0x04 + +static struct sk_buff *rtl8_4_tag_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct dsa_port *dp = dsa_slave_to_port(dev); + __be16 *p; + u8 *tag; + u16 out; + + /* Pad out so that the (stripped) packet is at least 64 bytes long + * (including FCS), otherwise the switch will drop the packet. + * Then we need an additional 8 bytes for the Realtek tag. + */ + if (__skb_put_padto(skb, ETH_ZLEN + RTL8_4_TAG_LEN, false)) + return NULL; + + skb_push(skb, RTL8_4_TAG_LEN); + + dsa_alloc_etype_header(skb, RTL8_4_TAG_LEN); + tag = dsa_etype_header_pos_tx(skb); + + /* Set Realtek EtherType */ + p = (__be16 *)tag; + *p = htons(RTL8_4_ETHERTYPE); + + /* Set Protocol; zero REASON */ + p = (__be16 *)(tag + 2); + *p = htons(RTL8_4_PROTOCOL_RTL8365MB << 8); + + /* Zero FID_EN, FID, PRI_EN, PRI, KEEP, LEARN_DIS */ + p = (__be16 *)(tag + 4); + *p = 0; + + /* Zero ALLOW; set RX (CPU->switch) forwarding port mask */ + p = (__be16 *)(tag + 6); + out = BIT(dp->index); + *p = htons(~(1 << 15) & BIT(dp->index)); + + return skb; +} + +static struct sk_buff *rtl8_4_tag_rcv(struct sk_buff *skb, + struct net_device *dev) +{ + __be16 *p; + u16 etype; + u8 proto; + u8 *tag; + u8 port; + u16 tmp; + + if (unlikely(!pskb_may_pull(skb, RTL8_4_TAG_LEN))) + return NULL; + + tag = dsa_etype_header_pos_rx(skb); + + /* Parse Realtek EtherType */ + p = (__be16 *)tag; + etype = ntohs(*p); + if (unlikely(etype != RTL8_4_ETHERTYPE)) { + netdev_dbg(dev, "non-realtek ethertype 0x%04x\n", etype); + return NULL; + } + + /* Parse Protocol; ignore REASON */ + p = (__be16 *)(tag + 2); + tmp = ntohs(*p); + proto = tmp >> 8; + if (unlikely(proto != RTL8_4_PROTOCOL_RTL8365MB)) { + netdev_dbg(dev, "unknown realtek protocol 0x%02x\n", proto); + return NULL; + } + + /* Ignore FID_EN, FID, PRI_EN, PRI, KEEP, LEARN_DIS */ + p = (__be16 *)(tag + 4); + + /* Ignore ALLOW; parse TX (switch->CPU) */ + p = (__be16 *)(tag + 6); + tmp = ntohs(*p); + port = tmp & 0xf; /* Port number is the LSB 4 bits */ + + skb->dev = dsa_master_find_slave(dev, 0, port); + if (!skb->dev) { + netdev_dbg(dev, "could not find slave for port %d\n", port); + return NULL; + } + + /* Remove tag and recalculate checksum */ + skb_pull_rcsum(skb, RTL8_4_TAG_LEN); + + dsa_strip_etype_header(skb, RTL8_4_TAG_LEN); + + skb->offload_fwd_mark = 1; + + return skb; +} + +static const struct dsa_device_ops rtl8_4_netdev_ops = { + .name = "rtl8_4", + .proto = DSA_TAG_PROTO_RTL8_4, + .xmit = rtl8_4_tag_xmit, + .rcv = rtl8_4_tag_rcv, + .needed_headroom = RTL8_4_TAG_LEN, +}; +module_dsa_tag_driver(rtl8_4_netdev_ops); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_RTL8_4); From patchwork Sun Aug 22 19:31:42 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Alvin_=C5=A0ipraga?= X-Patchwork-Id: 501476 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.5 required=3.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 474F2C432BE for ; Sun, 22 Aug 2021 19:33:02 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 203FB61266 for ; Sun, 22 Aug 2021 19:33:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229549AbhHVTdm (ORCPT ); Sun, 22 Aug 2021 15:33:42 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56298 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233160AbhHVTdi (ORCPT ); Sun, 22 Aug 2021 15:33:38 -0400 Received: from mail-ed1-x52c.google.com (mail-ed1-x52c.google.com [IPv6:2a00:1450:4864:20::52c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5E0E1C0613CF for ; Sun, 22 Aug 2021 12:32:55 -0700 (PDT) Received: by mail-ed1-x52c.google.com with SMTP id g21so22756695edw.4 for ; Sun, 22 Aug 2021 12:32:55 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=pqrs.dk; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=1Gyv/RbOACJ8K6iA/3W5xnPjspm9ELEwgq57vX6aoAE=; b=osGUgKgKa1zjemYgYk5Fs5hdwgRpFNoyFuofHao9l2RjKzzEf6QlVLN5MhkwS2u4Vh CnYiKL5IdTSZZ3vHBL9npQyJ7kwSZ/hn9Rxq/3bDVhrEzusPZNTmwgo0wm2DNhq2ambL 3ki+wVvJbhurAo/htZvPY4OjK8BslxUiH0K5c= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=1Gyv/RbOACJ8K6iA/3W5xnPjspm9ELEwgq57vX6aoAE=; b=T3TLY4YloGV5dPkTU/6ETddGbZWrWeFW+cSFX+xyYvp+erK19jEe03rK/UbkjNe6BF OqkQi25BbtqiWEDW1Kk8R2f/AK2l+oMiOzuzqof0x9RNRzOTdigsgcNYSpTCu7uI1AOn zA7VyLS/zi77tdqTMJGm+U2WR2hUV4+nXOTaxgmrEab08xQQDKCoY1gc8uTYuiVspS6D jfMPSUKaMHeJfnT7QG2PoxEtCpXdWwJxXMCtiQtvzvuyU1929YldMZ+n+SN2pZQJ2BsJ 0Qa+CkCIRGngtPwyWHRFj5UcF7t2zzR8WDaOGMA/Flr6zk9loEohj6aMyU3KWff1nWX2 T01A== X-Gm-Message-State: AOAM531c7uP2cV3ZAPHNAIMiN48DCjI0XuGIjCwkgOdUD/ezVxgXdcBI WDJ1EY4BmTZPzlI0i7iNklUF4w== X-Google-Smtp-Source: ABdhPJw8RB7Hd/o3vu6se6Zq+YcO6AZbOuRAg1Esb1LQv+7OxXfkaSPKDgsRGYOUH2LhDdBcqLstxw== X-Received: by 2002:aa7:db82:: with SMTP id u2mr34424559edt.299.1629660773196; Sun, 22 Aug 2021 12:32:53 -0700 (PDT) Received: from capella.. (80.71.142.18.ipv4.parknet.dk. [80.71.142.18]) by smtp.gmail.com with ESMTPSA id cn16sm7780053edb.9.2021.08.22.12.32.51 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 22 Aug 2021 12:32:52 -0700 (PDT) From: =?utf-8?q?Alvin_=C5=A0ipraga?= To: Linus Walleij , Andrew Lunn , Vivien Didelot , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Jakub Kicinski , Rob Herring , Heiner Kallweit , Russell King Cc: mir@bang-olufsen.dk, alvin@pqrs.dk, =?utf-8?q?Alvin_=C5=A0ipraga?= , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [RFC PATCH net-next 4/5] net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC Date: Sun, 22 Aug 2021 21:31:42 +0200 Message-Id: <20210822193145.1312668-5-alvin@pqrs.dk> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20210822193145.1312668-1-alvin@pqrs.dk> References: <20210822193145.1312668-1-alvin@pqrs.dk> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org From: Alvin Šipraga This patch adds a realtek-smi subdriver for the RTL8365MB-VC 4+1 port 10/100/1000M Ethernet switch controller. The driver has been developed based on a GPL-licensed OS-agnostic Realtek vendor driver known as rtl8367c found in the OpenWrt source tree. Despite the name, the RTL8365MB-VC has an entirely different register layout to the already-supported RTL8366RB ASIC. Notwithstanding this, the structure of the rtl8365mb subdriver is based on the rtl8366rb subdriver and makes use of the rtl8366 helper library for VLAN configuration. Like the 'rb, it establishes its own irqchip to handle cascaded PHY link status interrupts. The RTL8365MB-VC is a capable switch and provides a number of offload features that are not yet supported by this subdriver. However, the basic functionality should be the same as that the rtl8366rb, modulo LED support, Energy-Efficient Ethernet (EEE), and MTU configuration. Support for these features - and more - may follow. One more thing. Realtek's nomenclature for switches makes it hard to know exactly what other ASICs might be supported by this driver. The vendor driver goes by the name rtl8367c, but as far as I can tell, no chip actually exists under this name. As such, the subdriver is named rtl8365mb to emphasize the potentially limited support. But it is clear from the vendor sources that a number of other more advanced switches share a similar register layout, and further support should not be too hard to add given access to the relevant hardware. With this in mind, the subdriver has been written with as few assumptions about the particular chip as is reasonable. But the RTL8365MB-VC is the only hardware I have available, so some further work is surely needed. Signed-off-by: Alvin Šipraga Co-developed-by: Michael Rasmussen Signed-off-by: Michael Rasmussen --- drivers/net/dsa/Kconfig | 1 + drivers/net/dsa/Makefile | 2 +- drivers/net/dsa/realtek-smi-core.c | 4 + drivers/net/dsa/realtek-smi-core.h | 1 + drivers/net/dsa/rtl8365mb.c | 2124 ++++++++++++++++++++++++++++ 5 files changed, 2131 insertions(+), 1 deletion(-) create mode 100644 drivers/net/dsa/rtl8365mb.c diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index a5f1aa911fe2..7b1457a6e327 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -70,6 +70,7 @@ config NET_DSA_QCA8K config NET_DSA_REALTEK_SMI tristate "Realtek SMI Ethernet switch family support" select NET_DSA_TAG_RTL4_A + select NET_DSA_TAG_RTL8_4 select FIXED_PHY select IRQ_DOMAIN select REALTEK_PHY diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index f3598c040994..8da1569a34e6 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o -realtek-smi-objs := realtek-smi-core.o rtl8366.o rtl8366rb.o +realtek-smi-objs := realtek-smi-core.o rtl8366.o rtl8366rb.o rtl8365mb.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o diff --git a/drivers/net/dsa/realtek-smi-core.c b/drivers/net/dsa/realtek-smi-core.c index 6992b6b31db6..d64f85c47891 100644 --- a/drivers/net/dsa/realtek-smi-core.c +++ b/drivers/net/dsa/realtek-smi-core.c @@ -490,6 +490,10 @@ static const struct of_device_id realtek_smi_of_match[] = { .compatible = "realtek,rtl8366s", .data = NULL, }, + { + .compatible = "realtek,rtl8365mb", + .data = &rtl8365mb_variant, + }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, realtek_smi_of_match); diff --git a/drivers/net/dsa/realtek-smi-core.h b/drivers/net/dsa/realtek-smi-core.h index 6cfa5f2df7ea..005890ff1e4b 100644 --- a/drivers/net/dsa/realtek-smi-core.h +++ b/drivers/net/dsa/realtek-smi-core.h @@ -144,5 +144,6 @@ int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset); void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data); extern const struct realtek_smi_variant rtl8366rb_variant; +extern const struct realtek_smi_variant rtl8365mb_variant; #endif /* _REALTEK_SMI_H */ diff --git a/drivers/net/dsa/rtl8365mb.c b/drivers/net/dsa/rtl8365mb.c new file mode 100644 index 000000000000..7698c0e3e33e --- /dev/null +++ b/drivers/net/dsa/rtl8365mb.c @@ -0,0 +1,2124 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Realtek SMI subdriver for the Realtek RTL8365MB-VC Ethernet switch. + * + * Copyright (C) 2021 Alvin Šipraga + * Copyright (C) 2021 Michael Rasmussen + * + * The RTL8365MB-VC is a 4+1 port 10/100/1000M switch controller. It includes 4 + * integrated PHYs for the user facing ports, and an extension interface which + * can be connected to the CPU - or another PHY - via either MII, RMII, or + * RGMII. The switch is configured via the Realtek Simple Management Interface + * (SMI), which uses the MDIO/MDC lines. + * + * Below is a simplified block diagram of the chip and its relevant interfaces. + * + * .-----------------------------------. + * | | + * UTP <---------------> Giga PHY <-> PCS <-> P0 GMAC | + * UTP <---------------> Giga PHY <-> PCS <-> P1 GMAC | + * UTP <---------------> Giga PHY <-> PCS <-> P2 GMAC | + * UTP <---------------> Giga PHY <-> PCS <-> P3 GMAC | + * | | + * CPU/PHY <-MII/RMII/RGMII---> Extension <---> Extension | + * | interface 1 GMAC 1 | + * | | + * SMI driver/ <-MDC/SCL---> Management ~~~~~~~~~~~~~~ | + * EEPROM <-MDIO/SDA--> interface ~REALTEK ~~~~~ | + * | ~RTL8365MB ~~~ | + * | ~GXXXC TAIWAN~ | + * GPIO <--------------> Reset ~~~~~~~~~~~~~~ | + * | | + * Interrupt <----------> Link UP/DOWN events | + * controller | | + * '-----------------------------------' + * + * The driver uses DSA to integrate the 4 user and 1 extension ports into the + * kernel. Netdevices are created for the user ports, as are PHY devices for + * their integrated PHYs. The device tree firmware should also specify the link + * partner of the extension port - either via a fixed-link or other phy-handle. + * See the device tree bindings for more detailed information. Note that the + * driver has only been tested with a fixed-link, but in principle it should not + * matter. + * + * NOTE: Currently, only the RGMII interface is implemented in this driver. + * + * The interrupt line is asserted on link UP/DOWN events. The driver creates a + * custom irqchip to handle this interrupt and demultiplex the events by reading + * the status registers via SMI. Interrupts are then propagated to the relevant + * PHY device. + * + * The EEPROM contains initial register values which the chip will read over I2C + * upon hardware reset. It is also possible to omit the EEPROM. In both cases, + * the driver will manually reprogram some registers using jam tables to reach + * an initial state defined by the vendor driver. + * + * This Linux driver is written based on an OS-agnostic vendor driver from + * Realtek. The reference GPL-licensed sources can be found in the OpenWrt + * source tree under the name rtl8367c. The vendor driver claims to support a + * number of similar switch controllers from Realtek, but the only hardware we + * have is the RTL8365MB-VC. Moreover, there does not seem to be any chip under + * the name RTL8367C. Although one wishes that the 'C' stood for some kind of + * common hardware revision, there exist examples of chips with the suffix -VC + * which are explicitly not supported by the rtl8367c driver and which instead + * require the rtl8367d vendor driver. With all this uncertainty, the driver has + * been modestly named rtl8365mb. Future implementors may wish to rename things + * accordingly. + * + * In the same family of chips, some carry up to 8 user ports and up to 2 + * extension ports. Where possible this driver tries to make things generic, but + * more work must be done to support these configurations. According to + * documentation from Realtek, the family should include the following chips: + * + * - RTL8363NB + * - RTL8363NB-VB + * - RTL8363SC + * - RTL8363SC-VB + * - RTL8364NB + * - RTL8364NB-VB + * - RTL8365MB-VC + * - RTL8366SC + * - RTL8367RB-VB + * - RTL8367SB + * - RTL8367S + * - RTL8370MB + * - RTL8310SR + * + * Some of the register logic for these additional chips has been skipped over + * while implementing this driver. It is therefore not possible to assume that + * things will work out-of-the-box for other chips, and a careful review of the + * vendor driver may be needed to expand support. The RTL8365MB-VC seems to be + * one of the simpler chips. + */ + +#include +#include +#include +#include +#include +#include + +#include "realtek-smi-core.h" + +/* Port mapping macros + * + * PORT_NUM_x2y: map a port number from domain x to domain y + * PORT_MASK_x2y: map a port mask from domain x to domain y + * + * L = logical port domain, i.e. dsa_port.index + * P = physical port domain, used by the Realtek ASIC for port indexing; + * for ports with internal PHYs, this is also the PHY index + * E = extension port domain, used by the Realtek ASIC for managing EXT ports + * + * The terminology is borrowed from the vendor driver. The extension port domain + * is mostly used to navigate the labyrinthine layout of EXT port configuration + * registers and is not considered intuitive by the author. + * + * Unless a function is accessing chip registers, it should be using the logical + * port domain. Moreover, function arguments for port numbers and port masks + * must always be in the logical domain. The conversion must be done as close as + * possible to the register access to avoid chaos. + * + * The mappings vary between chips in the family supported by this driver. Here + * is an example of the mapping for the RTL8365MB-VC: + * + * L | P | E | remark + * ---+---+---+-------- + * 0 | 0 | | user port + * 1 | 1 | | user port + * 2 | 2 | | user port + * 3 | 3 | | user port + * 4 | 6 | 1 | extension (CPU) port + * + * NOTE: Currently this is hardcoded for the RTL8365MB-VC. This will probably + * require a rework when adding support for other chips. + */ +#define CPU_PORT_LOGICAL_NUM 4 +#define CPU_PORT_LOGICAL_MASK BIT(CPU_PORT_LOGICAL_NUM) +#define CPU_PORT_PHYSICAL_NUM 6 +#define CPU_PORT_PHYSICAL_MASK BIT(CPU_PORT_PHYSICAL_NUM) +#define CPU_PORT_EXTENSION_NUM 1 + +#define PORT_NUM_L2P(_p) \ + ((_p) == CPU_PORT_LOGICAL_NUM ? CPU_PORT_PHYSICAL_NUM : (_p)) +#define PORT_NUM_P2L(_p) \ + ((_p) == CPU_PORT_PHYSICAL_NUM ? CPU_PORT_LOGICAL_NUM : (_p)) +#define PORT_NUM_L2E(_p) (CPU_PORT_EXTENSION_NUM) + +#define PORT_MASK_L2P(_m) \ + (((_m) & ~CPU_PORT_LOGICAL_MASK) | \ + (((_m) & CPU_PORT_LOGICAL_MASK) ? CPU_PORT_PHYSICAL_MASK : 0)) +#define PORT_MASK_P2L(_m) \ + (((_m) & ~CPU_PORT_PHYSICAL_MASK) | \ + (((_m) & CPU_PORT_PHYSICAL_MASK) ? CPU_PORT_LOGICAL_MASK : 0)) + +/* Chip-specific data and limits */ +#define RTL8365MB_CHIP_ID_8365MB_VC 0x6367 +#define RTL8365MB_NUM_PORTS_8365MB_VC 5 +#define RTL8365MB_NUM_PHYS_8365MB_VC 4 +#define RTL8365MB_CPU_PORT_NUM_8365MB_VC 4 +#define RTL8365MB_CPU_PORT_MASK_8365MB_VC BIT(4) +#define RTL8365MB_PHY_PORT_MASK_8365MB_VC GENMASK(3, 0) +#define RTL8365MB_PORT_MASK_8365MB_VC \ + (RTL8365MB_CPU_PORT_MASK_8365MB_VC | \ + RTL8365MB_PHY_PORT_MASK_8365MB_VC) + +/* Family-specific data and limits */ +#define RTL8365MB_NUM_PHYREGS 32 +#define RTL8365MB_PHYREGMAX (RTL8365MB_NUM_PHYREGS - 1) +#define RTL8365MB_NUM_VLANS 32 +#define RTL8365MB_NUM_VIDS 4096 +#define RTL8365MB_VIDMAX (RTL8365MB_NUM_VIDS - 1) +#define RTL8365MB_NUM_EVIDS 8192 +#define RTL8365MB_EVIDMAX (RTL8365MB_NUM_EVIDS - 1) +#define RTL8365MB_PRIORITYMAX 7 +#define RTL8365MB_FIDMAX 15 +#define RTL8365MB_NUM_METERS 64 +#define RTL8365MB_METERMAX (RTL8365MB_NUM_METERS - 1) + +/* Chip identification registers */ +#define RTL8365MB_CHIP_ID_REG 0x1300 + +#define RTL8365MB_CHIP_VER_REG 0x1301 + +#define RTL8365MB_MAGIC_REG 0x13C2 +#define RTL8365MB_MAGIC_VALUE 0x0249 + +/* Chip reset register */ +#define RTL8365MB_CHIP_RESET_REG 0x1322 +#define RTL8365MB_CHIP_RESET_SW_MASK 0x0002 +#define RTL8365MB_CHIP_RESET_HW_MASK 0x0001 + +/* Interrupt polarity register */ +#define RTL8365MB_INTR_POLARITY_REG 0x1100 +#define RTL8365MB_INTR_POLARITY_MASK 0x0001 +#define RTL8365MB_INTR_POLARITY_HIGH 0 +#define RTL8365MB_INTR_POLARITY_LOW 1 + +/* Interrupt control register - enable or disable specific interrupt types */ +#define RTL8365MB_INTR_CTRL 0x1101 +#define RTL8365MB_INTR_CTRL_SLIENT_START_2_MASK 0x1000 +#define RTL8365MB_INTR_CTRL_SLIENT_START_MASK 0x800 +#define RTL8365MB_INTR_CTRL_ACL_ACTION_MASK 0x200 +#define RTL8365MB_INTR_CTRL_CABLE_DIAG_FIN_MASK 0x100 +#define RTL8365MB_INTR_CTRL_INTERRUPT_8051_MASK 0x80 +#define RTL8365MB_INTR_CTRL_LOOP_DETECTION_MASK 0x40 +#define RTL8365MB_INTR_CTRL_GREEN_TIMER_MASK 0x20 +#define RTL8365MB_INTR_CTRL_SPECIAL_CONGEST_MASK 0x10 +#define RTL8365MB_INTR_CTRL_SPEED_CHANGE_MASK 0x8 +#define RTL8365MB_INTR_CTRL_LEARN_OVER_MASK 0x4 +#define RTL8365MB_INTR_CTRL_METER_EXCEEDED_MASK 0x2 +#define RTL8365MB_INTR_CTRL_LINK_CHANGE_MASK 0x1 + + +/* Interrupt status register */ +#define RTL8365MB_INTR_STATUS_REG 0x1102 +#define RTL8365MB_INTR_STATUS_SLIENT_START_2_MASK 0x1000 +#define RTL8365MB_INTR_STATUS_SLIENT_START_MASK 0x800 +#define RTL8365MB_INTR_STATUS_ACL_ACTION_MASK 0x200 +#define RTL8365MB_INTR_STATUS_CABLE_DIAG_FIN_MASK 0x100 +#define RTL8365MB_INTR_STATUS_INTERRUPT_8051_MASK 0x80 +#define RTL8365MB_INTR_STATUS_LOOP_DETECTION_MASK 0x40 +#define RTL8365MB_INTR_STATUS_GREEN_TIMER_MASK 0x20 +#define RTL8365MB_INTR_STATUS_SPECIAL_CONGEST_MASK 0x10 +#define RTL8365MB_INTR_STATUS_SPEED_CHANGE_MASK 0x8 +#define RTL8365MB_INTR_STATUS_LEARN_OVER_MASK 0x4 +#define RTL8365MB_INTR_STATUS_METER_EXCEEDED_MASK 0x2 +#define RTL8365MB_INTR_STATUS_LINK_CHANGE_MASK 0x1 +#define RTL8365MB_INTR_STATUS_ALL_MASK \ + (RTL8365MB_INTR_STATUS_SLIENT_START_2_MASK | \ + RTL8365MB_INTR_STATUS_SLIENT_START_MASK | \ + RTL8365MB_INTR_STATUS_ACL_ACTION_MASK | \ + RTL8365MB_INTR_STATUS_CABLE_DIAG_FIN_MASK | \ + RTL8365MB_INTR_STATUS_INTERRUPT_8051_MASK | \ + RTL8365MB_INTR_STATUS_LOOP_DETECTION_MASK | \ + RTL8365MB_INTR_STATUS_GREEN_TIMER_MASK | \ + RTL8365MB_INTR_STATUS_SPECIAL_CONGEST_MASK | \ + RTL8365MB_INTR_STATUS_SPEED_CHANGE_MASK | \ + RTL8365MB_INTR_STATUS_LEARN_OVER_MASK | \ + RTL8365MB_INTR_STATUS_METER_EXCEEDED_MASK | \ + RTL8365MB_INTR_STATUS_LINK_CHANGE_MASK) + +/* Per-port interrupt type status registers */ +#define RTL8365MB_PORT_LINKDOWN_IND_REG 0x1106 +#define RTL8365MB_PORT_LINKDOWN_IND_MASK 0x7FF + +#define RTL8365MB_PORT_LINKUP_IND_REG 0x1107 +#define RTL8365MB_PORT_LINKUP_IND_MASK 0x7FF + +/* PHY indirect access registers */ +#define RTL8365MB_INDIRECT_ACCESS_CTRL_REG 0x1F00 +#define RTL8365MB_INDIRECT_ACCESS_CTRL_RW_MASK 0x0002 +#define RTL8365MB_INDIRECT_ACCESS_CTRL_RW_READ 0 +#define RTL8365MB_INDIRECT_ACCESS_CTRL_RW_WRITE 1 +#define RTL8365MB_INDIRECT_ACCESS_CTRL_CMD_MASK 0x1 +#define RTL8365MB_INDIRECT_ACCESS_CTRL_CMD_VALUE 1 +#define RTL8365MB_INDIRECT_ACCESS_STATUS_REG 0x1F01 +#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_REG 0x1F02 +#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_5_1_MASK GENMASK(4, 0) +#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK GENMASK(6, 5) +#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_9_6_MASK GENMASK(11, 8) +#define RTL8365MB_PHY_BASE 0x2000 +#define RTL8365MB_INDIRECT_ACCESS_WRITE_DATA_REG 0x1F03 +#define RTL8365MB_INDIRECT_ACCESS_READ_DATA_REG 0x1F04 + +/* PHY OCP address prefix register */ +#define RTL8365MB_GPHY_OCP_MSB_0_REG 0x1D15 +#define RTL8365MB_GPHY_OCP_MSB_0_CFG_CPU_OCPADR_MASK 0x0FC0 +#define RTL8365MB_PHY_OCP_ADDR_PREFIX_MASK 0xFC00 + +/* The PHY OCP addresses of PHY registers 0~31 start here */ +#define RTL8365MB_PHY_OCP_ADDR_PHYREG_BASE 0xA400 + +/* EXT port interface mode values - used in DIGITAL_INTERFACE_SELECT */ +#define RTL8365MB_EXT_PORT_MODE_DISABLE 0 +#define RTL8365MB_EXT_PORT_MODE_RGMII 1 +#define RTL8365MB_EXT_PORT_MODE_MII_MAC 2 +#define RTL8365MB_EXT_PORT_MODE_MII_PHY 3 +#define RTL8365MB_EXT_PORT_MODE_TMII_MAC 4 +#define RTL8365MB_EXT_PORT_MODE_TMII_PHY 5 +#define RTL8365MB_EXT_PORT_MODE_GMII 6 +#define RTL8365MB_EXT_PORT_MODE_RMII_MAC 7 +#define RTL8365MB_EXT_PORT_MODE_RMII_PHY 8 +#define RTL8365MB_EXT_PORT_MODE_SGMII 9 +#define RTL8365MB_EXT_PORT_MODE_HSGMII 10 +#define RTL8365MB_EXT_PORT_MODE_1000X_100FX 11 +#define RTL8365MB_EXT_PORT_MODE_1000X 12 +#define RTL8365MB_EXT_PORT_MODE_100FX 13 + +/* EXT port interface mode configuration registers 0~1 */ +#define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 0x1305 +#define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG1 0x13C3 +#define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG(_extport) \ + (RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 + \ + ((_extport) >> 1) * (0x13C3 - 0x1305)) +#define RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK(_extport) \ + (0xF << (((_extport) % 2))) +#define RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_OFFSET(_extport) \ + (((_extport) % 2) * 4) + +/* EXT port RGMII TX/RX delay configuration registers 1~2 */ +#define RTL8365MB_EXT_RGMXF_REG1 0x1307 +#define RTL8365MB_EXT_RGMXF_REG2 0x13C5 +#define RTL8365MB_EXT_RGMXF_REG(_extport) \ + (RTL8365MB_EXT_RGMXF_REG1 + \ + (((_extport) >> 1) * (0x13C5 - 0x1307))) +#define RTL8365MB_EXT_RGMXF_RXDELAY_MASK 0x0007 +#define RTL8365MB_EXT_RGMXF_TXDELAY_MASK 0x0008 + +/* External port speed values - used in DIGITAL_INTERFACE_FORCE */ +#define RTL8365MB_PORT_SPEED_10M 0 +#define RTL8365MB_PORT_SPEED_100M 1 +#define RTL8365MB_PORT_SPEED_1000M 2 + +/* EXT port force configuration registers 0~2 */ +#define RTL8365MB_DIGITAL_INTERFACE_FORCE_REG0 0x1310 +#define RTL8365MB_DIGITAL_INTERFACE_FORCE_REG1 0x1311 +#define RTL8365MB_DIGITAL_INTERFACE_FORCE_REG2 0x13c4 +#define RTL8365MB_DIGITAL_INTERFACE_FORCE_REG(_extport) \ + (RTL8365MB_DIGITAL_INTERFACE_FORCE_REG0 + \ + ((_extport) & 0x1) + \ + ((((_extport) >> 1) & 0x1) * (0x13C4 - 0x1310))) +#define RTL8365MB_DIGITAL_INTERFACE_FORCE_EN_MASK 0x1000 +#define RTL8365MB_DIGITAL_INTERFACE_FORCE_NWAY_MASK 0x0080 +#define RTL8365MB_DIGITAL_INTERFACE_FORCE_TXPAUSE_MASK 0x0040 +#define RTL8365MB_DIGITAL_INTERFACE_FORCE_RXPAUSE_MASK 0x0020 +#define RTL8365MB_DIGITAL_INTERFACE_FORCE_LINK_MASK 0x0010 +#define RTL8365MB_DIGITAL_INTERFACE_FORCE_DUPLEX_MASK 0x0004 +#define RTL8365MB_DIGITAL_INTERFACE_FORCE_SPEED_MASK 0x0003 + +/* CPU port mask register - controls which ports are treated as CPU ports */ +#define RTL8365MB_CPU_PORT_MASK_REG 0x1219 +#define RTL8365MB_CPU_PORT_MASK_MASK 0x07FF + +/* CPU control register */ +#define RTL8365MB_CPU_CTRL_REG 0x121a +#define RTL8365MB_CPU_CTRL_TRAP_PORT_EXT_MASK 0x400 +#define RTL8365MB_CPU_CTRL_TAG_FORMAT_MASK 0x200 +#define RTL8365MB_CPU_CTRL_RXBYTECOUNT_MASK 0x80 +#define RTL8365MB_CPU_CTRL_TAG_POSITION_MASK 0x40 +#define RTL8365MB_CPU_CTRL_TRAP_PORT_MASK 0x38 +#define RTL8365MB_CPU_CTRL_INSERTMODE_MASK 0x6 +#define RTL8365MB_CPU_CTRL_EN_MASK 0x1 + +/* Maximum packet length register */ +#define RTL8365MB_CFG0_MAX_LEN_REG 0x088c +#define RTL8365MB_CFG0_MAX_LEN_MASK 0x3FFF + +/* Table read/write registers */ +#define RTL8365MB_TABLE_READ_BASE 0x0520 +#define RTL8365MB_TABLE_READ_REG(_x) \ + (RTL8365MB_TABLE_READ_BASE + (_x)) +#define RTL8365MB_TABLE_WRITE_BASE 0x0510 +#define RTL8365MB_TABLE_WRITE_REG(_x) \ + (RTL8365MB_TABLE_WRITE_BASE + (_x)) +/* The generic table size is actually 10, but the uppermost table register has + * space for only half a word (1 byte). There doesn't seem to be any table with + * such large entries, so cap it at 9 to simplify the read/write logic below. + */ +#define RTL8365MB_TABLE_ENTRY_SIZE 9 + +/* Table access control register + * NOTE: Some tables seem to support alternative access methods. For now the + * method field is not used by rtl8365mb_table_{read,write}. + */ +#define RTL8365MB_TABLE_ACCESS_CTRL_REG 0x0500 +#define RTL8365MB_TABLE_ACCESS_CTRL_TARGET_MASK 0x0007 +#define RTL8365MB_TABLE_ACCESS_CTRL_TARGET_ACLRULE 1 +#define RTL8365MB_TABLE_ACCESS_CTRL_TARGET_ACLACT 2 +#define RTL8365MB_TABLE_ACCESS_CTRL_TARGET_CVLAN 3 +#define RTL8365MB_TABLE_ACCESS_CTRL_TARGET_L2 4 +#define RTL8365MB_TABLE_ACCESS_CTRL_TARGET_IGMP_GROUP 5 +#define RTL8365MB_TABLE_ACCESS_CTRL_CMD_TYPE_MASK 0x0008 +#define RTL8365MB_TABLE_ACCESS_CTRL_CMD_TYPE_READ 0 +#define RTL8365MB_TABLE_ACCESS_CTRL_CMD_TYPE_WRITE 1 +#define RTL8365MB_TABLE_ACCESS_CTRL_METHOD_MASK 0x0070 + +/* Table access address register */ +#define RTL8365MB_TABLE_ACCESS_ADDR_REG 0x0501 +#define RTL8365MB_TABLE_ACCESS_ADDR_MASK 0x1FFF + +/* Table LUT (look-up-table) address register */ +#define RTL8365MB_TABLE_LUT_ADDR_REG 0x0502 +#define RTL8365MB_TABLE_LUT_ADDR_ADDRESS2_MASK 0x4000 +#define RTL8365MB_TABLE_LUT_ADDR_BUSY_FLAG_MASK 0x2000 +#define RTL8365MB_TABLE_LUT_ADDR_HIT_STATUS_MASK 0x1000 +#define RTL8365MB_TABLE_LUT_ADDR_TYPE_MASK 0x0800 +#define RTL8365MB_TABLE_LUT_ADDR_ADDRESS_MASK 0x07FF + +/* CVLAN (i.e. vlan4k) table entry layout, u16[4] */ +#define RTL8365MB_CVLAN_ENTRY_D0_MBR_MASK 0x00FF +#define RTL8365MB_CVLAN_ENTRY_D0_UNTAG_MASK 0xFF00 +#define RTL8365MB_CVLAN_ENTRY_D1_FID_MASK 0x000F +#define RTL8365MB_CVLAN_ENTRY_D1_VBPEN_MASK 0x0010 +#define RTL8365MB_CVLAN_ENTRY_D1_VBPRI_MASK 0x00E0 +#define RTL8365MB_CVLAN_ENTRY_D1_ENVLANPOL_MASK 0x0100 +#define RTL8365MB_CVLAN_ENTRY_D1_METERIDX_MASK 0x3E00 +#define RTL8365MB_CVLAN_ENTRY_D1_IVL_SVL_MASK 0x4000 +#define RTL8365MB_CVLAN_ENTRY_D2_MBR_EXT_MASK 0x0007 +#define RTL8365MB_CVLAN_ENTRY_D2_UNTAG_EXT_MASK 0x0038 +#define RTL8365MB_CVLAN_ENTRY_D2_METERIDX_EXT_MASK 0x0040 + +/* Port isolation (forwarding mask) registers */ +#define RTL8365MB_PORT_ISOLATION_REG_BASE 0x08A2 +#define RTL8365MB_PORT_ISOLATION_REG(_physport) \ + (RTL8365MB_PORT_ISOLATION_REG_BASE + (_physport)) +#define RTL8365MB_PORT_ISOLATION_MASK 0x07FF + +/* Port-based VID registers 0~5 - each one holds an MC index for two ports */ +#define RTL8365MB_VLAN_PVID_CTRL_BASE 0x0700 + +#define RTL8365MB_VLAN_PVID_CTRL_REG(_physport) \ + (RTL8365MB_VLAN_PVID_CTRL_BASE + ((_physport) >> 1)) +#define RTL8365MB_VLAN_PVID_CTRL_PORT0_VIDX_MASK 0x001F +#define RTL8365MB_VLAN_PVID_CTRL_PORT1_VIDX_MASK 0x1F00 +#define RTL8365MB_VLAN_PVID_CTRL_PORT_VIDX_OFFSET(_physport) \ + (((_physport) & 1) << 3) +#define RTL8365MB_VLAN_PVID_CTRL_PORT_VIDX_MASK(_physport) \ + (0x1F << RTL8365MB_VLAN_PVID_CTRL_PORT_VIDX_OFFSET(_physport)) + +/* VLAN control register */ +#define RTL8365MB_VLAN_CTRL_REG 0x07A8 +#define RTL8365MB_VLAN_CTRL_EN_MASK 0x0001 + +/* VLAN ingress filter register - enable ingress filter on masked ports */ +#define RTL8365MB_VLAN_INGRESS_REG 0x07A9 +#define RTL8365MB_VLAN_INGRESS_FILTER_PORT_EN_OFFSET(_physport) (_physport) +#define RTL8365MB_VLAN_INGRESS_FILTER_PORT_EN_MASK(_physport) BIT(_physport) + +/* VLAN member configuration registers 0~31, u16[3] */ +#define RTL8365MB_VLAN_MC_BASE 0x0728 +#define RTL8365MB_VLAN_MC_REG(_x) \ + (RTL8365MB_VLAN_MC_BASE + (_x) * 4) +#define RTL8365MB_VLAN_MC_D0_MBR_MASK 0x07FF +#define RTL8365MB_VLAN_MC_D1_FID_MASK 0x000F +#define RTL8365MB_VLAN_MC_D2_METERIDX_MASK 0x07E0 +#define RTL8365MB_VLAN_MC_D2_ENVLANPOL_MASK 0x0010 +#define RTL8365MB_VLAN_MC_D2_VBPRI_MASK 0x000E +#define RTL8365MB_VLAN_MC_D2_VBPEN_MASK 0x0001 +#define RTL8365MB_VLAN_MC_D3_EVID_MASK 0x1FFF + +enum rtl8365mb_table { + RTL8365MB_TABLE_ACLRULE = RTL8365MB_TABLE_ACCESS_CTRL_TARGET_ACLRULE, + RTL8365MB_TABLE_ACLACT = RTL8365MB_TABLE_ACCESS_CTRL_TARGET_ACLACT, + RTL8365MB_TABLE_CVLAN = RTL8365MB_TABLE_ACCESS_CTRL_TARGET_CVLAN, + RTL8365MB_TABLE_L2 = RTL8365MB_TABLE_ACCESS_CTRL_TARGET_L2, + RTL8365MB_TABLE_IGMP_GROUP = + RTL8365MB_TABLE_ACCESS_CTRL_TARGET_IGMP_GROUP, +}; + +/* MIB counter value registers */ +#define RTL8365MB_MIB_COUNTER_BASE 0x1000 +#define RTL8365MB_MIB_COUNTER_REG(_x) (RTL8365MB_MIB_COUNTER_BASE + (_x)) + +/* MIB counter address register */ +#define RTL8365MB_MIB_ADDRESS_REG 0x1004 +#define RTL8365MB_MIB_ADDRESS_PORT_OFFSET 0x7C +#define RTL8365MB_MIB_ADDRESS(_p, _x) \ + (((RTL8365MB_MIB_ADDRESS_PORT_OFFSET) * (_p) + (_x)) >> 2) + +#define RTL8365MB_MIB_CTRL0_REG 0x1005 +#define RTL8365MB_MIB_CTRL0_RESET_FLAG_MASK 0x2 +#define RTL8365MB_MIB_CTRL0_BUSY_FLAG_MASK 0x0001 + +static struct rtl8366_mib_counter rtl8365mb_mib_counters[] = { + { 0, 0, 4, "ifInOctets" }, + { 0, 4, 2, "dot3StatsFCSErrors" }, + { 0, 6, 2, "dot3StatsSymbolErrors" }, + { 0, 8, 2, "dot3InPauseFrames" }, + { 0, 10, 2, "dot3ControlInUnknownOpcodes" }, + { 0, 12, 2, "etherStatsFragments" }, + { 0, 14, 2, "etherStatsJabbers" }, + { 0, 16, 2, "ifInUcastPkts" }, + { 0, 18, 2, "etherStatsDropEvents" }, + { 0, 20, 2, "ifInMulticastPkts" }, + { 0, 22, 2, "ifInBroadcastPkts" }, + { 0, 24, 2, "inMldChecksumError" }, + { 0, 26, 2, "inIgmpChecksumError" }, + { 0, 28, 2, "inMldSpecificQuery" }, + { 0, 30, 2, "inMldGeneralQuery" }, + { 0, 32, 2, "inIgmpSpecificQuery" }, + { 0, 34, 2, "inIgmpGeneralQuery" }, + { 0, 36, 2, "inMldLeaves" }, + { 0, 38, 2, "inIgmpLeaves" }, + { 0, 40, 4, "etherStatsOctets" }, + { 0, 44, 2, "etherStatsUnderSizePkts" }, + { 0, 46, 2, "etherOversizeStats" }, + { 0, 48, 2, "etherStatsPkts64Octets" }, + { 0, 50, 2, "etherStatsPkts65to127Octets" }, + { 0, 52, 2, "etherStatsPkts128to255Octets" }, + { 0, 54, 2, "etherStatsPkts256to511Octets" }, + { 0, 56, 2, "etherStatsPkts512to1023Octets" }, + { 0, 58, 2, "etherStatsPkts1024to1518Octets" }, + { 0, 60, 4, "ifOutOctets" }, + { 0, 64, 2, "dot3StatsSingleCollisionFrames" }, + { 0, 66, 2, "dot3StatMultipleCollisionFrames" }, + { 0, 68, 2, "dot3sDeferredTransmissions" }, + { 0, 70, 2, "dot3StatsLateCollisions" }, + { 0, 72, 2, "etherStatsCollisions" }, + { 0, 74, 2, "dot3StatsExcessiveCollisions" }, + { 0, 76, 2, "dot3OutPauseFrames" }, + { 0, 78, 2, "ifOutDiscards" }, + { 0, 80, 2, "dot1dTpPortInDiscards" }, + { 0, 82, 2, "ifOutUcastPkts" }, + { 0, 84, 2, "ifOutMulticastPkts" }, + { 0, 86, 2, "ifOutBroadcastPkts" }, + { 0, 88, 2, "outOampduPkts" }, + { 0, 90, 2, "inOampduPkts" }, + { 0, 92, 4, "inIgmpJoinsSuccess" }, + { 0, 96, 2, "inIgmpJoinsFail" }, + { 0, 98, 2, "inMldJoinsSuccess" }, + { 0, 100, 2, "inMldJoinsFail" }, + { 0, 102, 2, "inReportSuppressionDrop" }, + { 0, 104, 2, "inLeaveSuppressionDrop" }, + { 0, 106, 2, "outIgmpReports" }, + { 0, 108, 2, "outIgmpLeaves" }, + { 0, 110, 2, "outIgmpGeneralQuery" }, + { 0, 112, 2, "outIgmpSpecificQuery" }, + { 0, 114, 2, "outMldReports" }, + { 0, 116, 2, "outMldLeaves" }, + { 0, 118, 2, "outMldGeneralQuery" }, + { 0, 120, 2, "outMldSpecificQuery" }, + { 0, 122, 2, "inKnownMulticastPkts" }, +}; + +struct rtl8365mb_vlan_mc { + u16 evid; + u16 member; + u8 fid; + u8 priority; + u8 priority_en : 1; + u8 policing_en : 1; + u16 meteridx; +}; + +struct rtl8365mb_vlan_4k { + u16 vid; + u16 member; + u16 untag; + u8 fid; + u8 priority; + u8 priority_en : 1; + u8 policing_en : 1; + u8 ivl_en : 1; + u8 meteridx; +}; + +struct rtl8365mb_jam_tbl_entry { + u16 reg; + u16 val; +}; + +/* Lifted from the vendor driver sources */ +static const struct rtl8365mb_jam_tbl_entry rtl8365mb_init_jam_8365mb_vc[] = { + { 0x13EB, 0x15BB }, { 0x1303, 0x06D6 }, { 0x1304, 0x0700 }, + { 0x13E2, 0x003F }, { 0x13F9, 0x0090 }, { 0x121E, 0x03CA }, + { 0x1233, 0x0352 }, { 0x1237, 0x00A0 }, { 0x123A, 0x0030 }, + { 0x1239, 0x0084 }, { 0x0301, 0x1000 }, { 0x1349, 0x001F }, + { 0x18E0, 0x4004 }, { 0x122B, 0x241C }, { 0x1305, 0xC000 }, + { 0x13F0, 0x0000 }, +}; + +static const struct rtl8365mb_jam_tbl_entry rtl8365mb_init_jam_common[] = { + { 0x1200, 0x7FCB }, { 0x0884, 0x0003 }, { 0x06EB, 0x0001 }, + { 0x03Fa, 0x0007 }, { 0x08C8, 0x00C0 }, { 0x0A30, 0x020E }, + { 0x0800, 0x0000 }, { 0x0802, 0x0000 }, { 0x09DA, 0x0013 }, + { 0x1D32, 0x0002 }, +}; + +enum rtl8365mb_cpu_insert { + RTL8365MB_CPU_INSERT_TO_ALL = 0, + RTL8365MB_CPU_INSERT_TO_TRAPPING = 1, + RTL8365MB_CPU_INSERT_TO_NONE = 2, +}; + +enum rtl8365mb_cpu_position { + RTL8365MB_CPU_POS_AFTER_SA = 0, + RTL8365MB_CPU_POS_BEFORE_CRC = 1, +}; + +enum rtl8365mb_cpu_format { + RTL8365MB_CPU_FORMAT_8BYTES = 0, + RTL8365MB_CPU_FORMAT_4BYTES = 1, +}; + +enum rtl8365mb_cpu_rxlen { + RTL8365MB_CPU_RXLEN_72BYTES = 0, + RTL8365MB_CPU_RXLEN_64BYTES = 1, +}; + +struct rtl8365mb_cpu { + bool enable; /* enable CPU tagging */ + u32 mask; /* port mask of ports that should parse CPU tags */ + u32 trap_port; /* forward trapped frames to this port */ + enum rtl8365mb_cpu_insert insert; /* tag insertion mode */ + enum rtl8365mb_cpu_position position; /* position of CPU tag in frame */ + enum rtl8365mb_cpu_rxlen rx_length; /* minimum CPU RX length */ + enum rtl8365mb_cpu_format format; /* CPU tag format */ +}; + +/* Private chip-specific driver data */ +struct rtl8365mb { + int irq; /* registered IRQ or zero */ + u32 chip_id; + u32 chip_ver; + unsigned int num_phys; /* number of integrated PHYs */ + u32 port_mask; /* mask of all ports */ + u32 phy_port_mask; /* mask of ports with integrated PHYs */ + struct rtl8365mb_cpu cpu; /* CPU configuration */ + const struct rtl8365mb_jam_tbl_entry *jam_table; + size_t jam_size; +}; + +static int rtl8365mb_table_poll_busy(struct realtek_smi *smi) +{ + u32 val; + + return regmap_read_poll_timeout( + smi->map, RTL8365MB_TABLE_LUT_ADDR_REG, val, + (val & RTL8365MB_TABLE_LUT_ADDR_BUSY_FLAG_MASK) == 0, 10, 100); +} + +static int rtl8365mb_table_read(struct realtek_smi *smi, + enum rtl8365mb_table target, u32 addr, + u16 *data, size_t size) +{ + u32 val; + int ret; + int i; + + if (!FIELD_FIT(RTL8365MB_TABLE_ACCESS_ADDR_MASK, addr)) + return -EINVAL; + + if (size > RTL8365MB_TABLE_ENTRY_SIZE) + return -E2BIG; + + ret = rtl8365mb_table_poll_busy(smi); + if (ret) + return ret; + + /* Set read address */ + ret = regmap_write(smi->map, RTL8365MB_TABLE_ACCESS_ADDR_REG, + FIELD_PREP(RTL8365MB_TABLE_ACCESS_ADDR_MASK, addr)); + if (ret) + return ret; + + /* Execute read operation */ + ret = regmap_write_bits( + smi->map, RTL8365MB_TABLE_ACCESS_CTRL_REG, + RTL8365MB_TABLE_ACCESS_CTRL_TARGET_MASK | + RTL8365MB_TABLE_ACCESS_CTRL_CMD_TYPE_MASK, + FIELD_PREP(RTL8365MB_TABLE_ACCESS_CTRL_TARGET_MASK, target) | + FIELD_PREP(RTL8365MB_TABLE_ACCESS_CTRL_CMD_TYPE_MASK, + RTL8365MB_TABLE_ACCESS_CTRL_CMD_TYPE_READ)); + if (ret) + return ret; + + ret = rtl8365mb_table_poll_busy(smi); + if (ret) + return ret; + + /* Read table entry */ + for (i = 0; i < size; i++) { + ret = regmap_read(smi->map, RTL8365MB_TABLE_READ_REG(i), &val); + if (ret) + return ret; + + data[i] = val & 0xFFFF; + } + + return 0; +} + +static int rtl8365mb_table_write(struct realtek_smi *smi, + enum rtl8365mb_table target, u32 addr, + u16 *data, size_t size) +{ + int ret; + int i; + + if (!FIELD_FIT(RTL8365MB_TABLE_ACCESS_ADDR_MASK, addr)) + return -EINVAL; + + if (size > RTL8365MB_TABLE_ENTRY_SIZE) + return -E2BIG; + + /* Write table entry */ + for (i = 0; i < size; i++) { + ret = regmap_write(smi->map, RTL8365MB_TABLE_WRITE_REG(i), + data[i]); + if (ret) + return ret; + } + + /* Set write address */ + ret = regmap_write(smi->map, RTL8365MB_TABLE_ACCESS_ADDR_REG, + FIELD_PREP(RTL8365MB_TABLE_ACCESS_ADDR_MASK, addr)); + if (ret) + return ret; + + /* Execute write operation */ + ret = regmap_write_bits( + smi->map, RTL8365MB_TABLE_ACCESS_CTRL_REG, + RTL8365MB_TABLE_ACCESS_CTRL_TARGET_MASK | + RTL8365MB_TABLE_ACCESS_CTRL_CMD_TYPE_MASK, + FIELD_PREP(RTL8365MB_TABLE_ACCESS_CTRL_TARGET_MASK, target) | + FIELD_PREP(RTL8365MB_TABLE_ACCESS_CTRL_CMD_TYPE_MASK, + RTL8365MB_TABLE_ACCESS_CTRL_CMD_TYPE_WRITE)); + + return ret; +} + +static int rtl8365mb_phy_poll_busy(struct realtek_smi *smi) +{ + u32 val; + + return regmap_read_poll_timeout(smi->map, + RTL8365MB_INDIRECT_ACCESS_STATUS_REG, + val, val == 0, 10, 100); +} + +static int rtl8365mb_phy_ocp_prepare(struct realtek_smi *smi, int phy, + u32 ocp_addr) +{ + u32 val; + int ret; + + /* Set OCP prefix */ + val = FIELD_GET(RTL8365MB_PHY_OCP_ADDR_PREFIX_MASK, ocp_addr); + ret = regmap_update_bits( + smi->map, RTL8365MB_GPHY_OCP_MSB_0_REG, + RTL8365MB_GPHY_OCP_MSB_0_CFG_CPU_OCPADR_MASK, + FIELD_PREP(RTL8365MB_GPHY_OCP_MSB_0_CFG_CPU_OCPADR_MASK, val)); + if (ret) + return ret; + + /* Set PHY register address */ + val = RTL8365MB_PHY_BASE; + val |= FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK, phy); + val |= FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_5_1_MASK, + ocp_addr >> 1); + val |= FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_9_6_MASK, + ocp_addr >> 6); + ret = regmap_write(smi->map, RTL8365MB_INDIRECT_ACCESS_ADDRESS_REG, + val); + if (ret) + return ret; + + return 0; +} + +static int rtl8365mb_phy_ocp_read(struct realtek_smi *smi, int phy, + u32 ocp_addr, u16 *data) +{ + u32 val; + int ret; + + ret = rtl8365mb_phy_poll_busy(smi); + if (ret) + return ret; + + ret = rtl8365mb_phy_ocp_prepare(smi, phy, ocp_addr); + if (ret) + return ret; + + /* Execute read operation */ + val = FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_CTRL_CMD_MASK, + RTL8365MB_INDIRECT_ACCESS_CTRL_CMD_VALUE) | + FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_CTRL_RW_MASK, + RTL8365MB_INDIRECT_ACCESS_CTRL_RW_READ); + ret = regmap_write(smi->map, RTL8365MB_INDIRECT_ACCESS_CTRL_REG, val); + if (ret) + return ret; + + ret = rtl8365mb_phy_poll_busy(smi); + if (ret) + return ret; + + /* Get PHY register data */ + ret = regmap_read(smi->map, RTL8365MB_INDIRECT_ACCESS_READ_DATA_REG, + &val); + if (ret) + return ret; + + *data = val & 0xFFFF; + + return 0; +} + +static int rtl8365mb_phy_ocp_write(struct realtek_smi *smi, int phy, + u32 ocp_addr, u16 data) +{ + u32 val; + int ret; + + ret = rtl8365mb_phy_poll_busy(smi); + if (ret) + return ret; + + ret = rtl8365mb_phy_ocp_prepare(smi, phy, ocp_addr); + if (ret) + return ret; + + /* Set PHY register data */ + ret = regmap_write(smi->map, RTL8365MB_INDIRECT_ACCESS_WRITE_DATA_REG, + data); + if (ret) + return ret; + + /* Execute write operation */ + val = FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_CTRL_CMD_MASK, + RTL8365MB_INDIRECT_ACCESS_CTRL_CMD_VALUE) | + FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_CTRL_RW_MASK, + RTL8365MB_INDIRECT_ACCESS_CTRL_RW_WRITE); + ret = regmap_write(smi->map, RTL8365MB_INDIRECT_ACCESS_CTRL_REG, val); + if (ret) + return ret; + + ret = rtl8365mb_phy_poll_busy(smi); + if (ret) + return ret; + + return 0; +} + +static int rtl8365mb_phy_read(struct realtek_smi *smi, int phy, int regnum) +{ + struct rtl8365mb *mb = smi->chip_data; + u32 ocp_addr; + u16 val; + int ret; + + if (phy >= mb->num_phys || regnum > RTL8365MB_PHYREGMAX) + return -EINVAL; + + ocp_addr = RTL8365MB_PHY_OCP_ADDR_PHYREG_BASE + regnum * 2; + + ret = rtl8365mb_phy_ocp_read(smi, phy, ocp_addr, &val); + if (ret) { + dev_err(smi->dev, + "failed to read PHY%d reg %02x @ %04x, ret %d\n", phy, + regnum, ocp_addr, ret); + return ret; + } + + dev_dbg(smi->dev, "read PHY%d register 0x%02x @ %04x, val <- %04x\n", + phy, regnum, ocp_addr, val); + + return val; +} + +static int rtl8365mb_phy_write(struct realtek_smi *smi, int phy, int regnum, + u16 val) +{ + struct rtl8365mb *mb = smi->chip_data; + u32 ocp_addr; + int ret; + + if (phy >= mb->num_phys || regnum > RTL8365MB_PHYREGMAX) + return -EINVAL; + + ocp_addr = RTL8365MB_PHY_OCP_ADDR_PHYREG_BASE + regnum * 2; + + ret = rtl8365mb_phy_ocp_write(smi, phy, ocp_addr, val); + if (ret) { + dev_err(smi->dev, + "failed to write PHY%d reg %02x @ %04x, ret %d\n", phy, + regnum, ocp_addr, ret); + return ret; + } + + dev_dbg(smi->dev, "write PHY%d register 0x%02x @ %04x, val -> %04x\n", + phy, regnum, ocp_addr, val); + + return 0; +} + +static enum dsa_tag_protocol +rtl8365mb_get_tag_protocol(struct dsa_switch *ds, int port, + enum dsa_tag_protocol mp) +{ + return DSA_TAG_PROTO_RTL8_4; +} + +static int rtl8365mb_ext_config_rgmii(struct realtek_smi *smi, int port, + phy_interface_t interface) +{ + int tx_delay = 0; + int rx_delay = 0; + int ext_port; + int ret; + + if (port == smi->cpu_port) { + ext_port = PORT_NUM_L2E(port); + } else { + dev_err(smi->dev, "only one EXT port is currently supported\n"); + return -EINVAL; + } + + /* Set the RGMII TX/RX delay + * + * The Realtek vendor driver indicates the following possible + * configuration settings: + * + * TX delay: + * 0 = no delay, 1 = 2 ns delay + * RX delay: + * 0 = no delay, 7 = maximum delay + * No units are specified, but there are a total of 8 steps. + * + * The vendor driver also states that this must be configured *before* + * forcing the external interface into a particular mode, which is done + * in the rtl8365mb_phylink_mac_link_{up,down} functions. + * + * NOTE: For now this is hardcoded to tx_delay = 1, rx_delay = 4. + */ + if (interface == PHY_INTERFACE_MODE_RGMII_ID || + interface == PHY_INTERFACE_MODE_RGMII_TXID) + tx_delay = 1; /* 2 ns */ + + if (interface == PHY_INTERFACE_MODE_RGMII_ID || + interface == PHY_INTERFACE_MODE_RGMII_RXID) + rx_delay = 4; + + ret = regmap_update_bits( + smi->map, RTL8365MB_EXT_RGMXF_REG(ext_port), + RTL8365MB_EXT_RGMXF_TXDELAY_MASK | + RTL8365MB_EXT_RGMXF_RXDELAY_MASK, + FIELD_PREP(RTL8365MB_EXT_RGMXF_TXDELAY_MASK, tx_delay) | + FIELD_PREP(RTL8365MB_EXT_RGMXF_RXDELAY_MASK, rx_delay)); + if (ret) + return ret; + + ret = regmap_update_bits( + smi->map, RTL8365MB_DIGITAL_INTERFACE_SELECT_REG(ext_port), + RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK(ext_port), + RTL8365MB_EXT_PORT_MODE_RGMII + << RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_OFFSET( + ext_port)); + if (ret) + return ret; + + return 0; +} + +static int rtl8365mb_ext_config_forcemode(struct realtek_smi *smi, int port, + bool link, int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + u32 r_tx_pause; + u32 r_rx_pause; + u32 r_duplex; + u32 r_speed; + u32 r_link; + int ext_port; + int val; + int ret; + + if (port == smi->cpu_port) { + ext_port = PORT_NUM_L2E(port); + } else { + dev_err(smi->dev, "only one EXT port is currently supported\n"); + return -EINVAL; + } + + if (link) { + /* Force the link up with the desired configuration */ + r_link = 1; + r_rx_pause = rx_pause ? 1 : 0; + r_tx_pause = tx_pause ? 1 : 0; + + if (speed == SPEED_1000) { + r_speed = RTL8365MB_PORT_SPEED_1000M; + } else if (speed == SPEED_100) { + r_speed = RTL8365MB_PORT_SPEED_100M; + } else if (speed == SPEED_10) { + r_speed = RTL8365MB_PORT_SPEED_10M; + } else { + dev_err(smi->dev, "unsupported port speed %s\n", + phy_speed_to_str(speed)); + return -EINVAL; + } + + if (duplex == DUPLEX_FULL) { + r_duplex = 1; + } else if (duplex == DUPLEX_HALF) { + r_duplex = 0; + } else { + dev_err(smi->dev, "unsupported duplex %s\n", + phy_duplex_to_str(duplex)); + return -EINVAL; + } + } else { + /* Force the link down and reset any programmed configuration */ + r_link = 0; + r_tx_pause = 0; + r_rx_pause = 0; + r_speed = 0; + r_duplex = 0; + } + + val = FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_EN_MASK, 1) | + FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_TXPAUSE_MASK, + r_tx_pause) | + FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_RXPAUSE_MASK, + r_rx_pause) | + FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_LINK_MASK, r_link) | + FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_DUPLEX_MASK, + r_duplex) | + FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_SPEED_MASK, r_speed); + ret = regmap_write( + smi->map, RTL8365MB_DIGITAL_INTERFACE_FORCE_REG(ext_port), val); + if (ret) + return ret; + + return 0; +} + +static bool rtl8365mb_phy_mode_supported(struct dsa_switch *ds, int port, + phy_interface_t interface) +{ + if (dsa_is_user_port(ds, port) && + (interface == PHY_INTERFACE_MODE_NA || + interface == PHY_INTERFACE_MODE_INTERNAL)) + /* Internal PHY */ + return true; + else if (dsa_is_cpu_port(ds, port) && + phy_interface_mode_is_rgmii(interface)) + /* Extension MAC */ + return true; + + return false; +} + +static void rtl8365mb_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +{ + struct realtek_smi *smi = ds->priv; + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0 }; + + /* include/linux/phylink.h says: + * When @state->interface is %PHY_INTERFACE_MODE_NA, phylink + * expects the MAC driver to return all supported link modes. + */ + if (state->interface != PHY_INTERFACE_MODE_NA && + !rtl8365mb_phy_mode_supported(ds, port, state->interface)) { + dev_err(smi->dev, "phy mode %s is unsupported on port %d\n", + phy_modes(state->interface), port); + linkmode_zero(supported); + return; + } + + phylink_set_port_modes(mask); + + phylink_set(mask, Autoneg); + phylink_set(mask, Pause); + phylink_set(mask, Asym_Pause); + + phylink_set(mask, 10baseT_Half); + phylink_set(mask, 10baseT_Full); + phylink_set(mask, 100baseT_Half); + phylink_set(mask, 100baseT_Full); + phylink_set(mask, 1000baseT_Full); + phylink_set(mask, 1000baseT_Half); + + linkmode_and(supported, supported, mask); + linkmode_and(state->advertising, state->advertising, mask); +} + +static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct realtek_smi *smi = ds->priv; + int ret; + + if (!rtl8365mb_phy_mode_supported(ds, port, state->interface)) { + dev_err(smi->dev, "phy mode %s is unsupported on port %d\n", + phy_modes(state->interface), port); + return; + } + + /* If port MAC is connected to an internal PHY, we have nothing to do */ + if (dsa_is_user_port(ds, port)) + return; + + if (mode != MLO_AN_PHY && mode != MLO_AN_FIXED) { + dev_err(smi->dev, + "port %d supports only conventional PHY or fixed-link\n", + port); + return; + } + + if (phy_interface_mode_is_rgmii(state->interface)) { + ret = rtl8365mb_ext_config_rgmii(smi, port, state->interface); + if (ret) + dev_err(smi->dev, + "failed to configure RGMII mode on port %d: %d\n", + port, ret); + return; + } + + /* TODO: Implement MII and RMII modes, which the RTL8365MB-VC also + * supports + */ +} + +static void rtl8365mb_phylink_mac_link_down(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface) +{ + struct realtek_smi *smi = ds->priv; + int ret; + + if (dsa_is_cpu_port(ds, port)) { + ret = rtl8365mb_ext_config_forcemode(smi, port, false, 0, 0, + false, false); + if (ret) + dev_err(smi->dev, + "failed to reset forced mode on port %d: %d\n", + port, ret); + + return; + } +} + +static void rtl8365mb_phylink_mac_link_up(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface, + struct phy_device *phydev, int speed, + int duplex, bool tx_pause, + bool rx_pause) +{ + struct realtek_smi *smi = ds->priv; + int ret; + + if (dsa_is_cpu_port(ds, port)) { + ret = rtl8365mb_ext_config_forcemode( + smi, port, true, speed, duplex, tx_pause, rx_pause); + if (ret) + dev_err(smi->dev, + "failed to force mode on port %d: %d\n", port, + ret); + + return; + } +} + +static int rtl8365mb_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct realtek_smi *smi = ds->priv; + int val; + + if (dsa_is_user_port(ds, port)) { + /* Power up the internal PHY and restart autonegotiation */ + val = rtl8365mb_phy_read(smi, port, MII_BMCR); + if (val < 0) + return val; + + val &= ~BMCR_PDOWN; + val |= BMCR_ANRESTART; + + return rtl8365mb_phy_write(smi, port, MII_BMCR, val); + } + + return 0; +} + +static void rtl8365mb_port_disable(struct dsa_switch *ds, int port) +{ + struct realtek_smi *smi = ds->priv; + int val; + + if (dsa_is_user_port(ds, port)) { + /* Power down the internal PHY */ + val = rtl8365mb_phy_read(smi, port, MII_BMCR); + if (val < 0) + return; + + val |= BMCR_PDOWN; + + rtl8365mb_phy_write(smi, port, MII_BMCR, val); + + return; + } +} + +int rtl8365mb_port_vlan_filtering(struct dsa_switch *ds, int port, + bool vlan_filtering, + struct netlink_ext_ack *extack) +{ + struct realtek_smi *smi = ds->priv; + u32 phys_port = PORT_NUM_L2P(port); + int ret; + + dev_info(smi->dev, "%s filtering on port %d\n", + vlan_filtering ? "enable" : "disable", port); + + /* vlan_filtering on: Discard VLAN tagged frames if the port is not a + * member of the VLAN with which the packet is associated. Untagged + * packets should also be discarded unless the port has a PVID + * programmed. + * + * vlan_filtering off: Accept all VLAN tagged frames, including + * untagged. + */ + ret = regmap_update_bits( + smi->map, RTL8365MB_VLAN_INGRESS_REG, + RTL8365MB_VLAN_INGRESS_FILTER_PORT_EN_MASK(phys_port), + (vlan_filtering ? 1 : 0) + << RTL8365MB_VLAN_INGRESS_FILTER_PORT_EN_OFFSET( + phys_port)); + if (ret) + return ret; + + return 0; +} + +static int _rtl8365mb_get_vlan_4k(struct realtek_smi *smi, u32 vid, + struct rtl8365mb_vlan_4k *vlan4k) +{ + u32 phys_member; + u32 phys_untag; + u16 data[3]; + int ret; + + if (vid > RTL8365MB_VIDMAX) + return -EINVAL; + + ret = rtl8365mb_table_read(smi, RTL8365MB_TABLE_CVLAN, vid, data, + ARRAY_SIZE(data)); + if (ret) + return ret; + + memset(vlan4k, 0, sizeof(*vlan4k)); + + /* Unpack table entry */ + vlan4k->vid = vid; + phys_member = FIELD_GET(RTL8365MB_CVLAN_ENTRY_D0_MBR_MASK, data[0]) | + (FIELD_GET(RTL8365MB_CVLAN_ENTRY_D2_MBR_EXT_MASK, data[2]) + << 8); + phys_untag = + FIELD_GET(RTL8365MB_CVLAN_ENTRY_D0_UNTAG_MASK, data[0]) | + (FIELD_GET(RTL8365MB_CVLAN_ENTRY_D2_UNTAG_EXT_MASK, data[2]) + << 8); + vlan4k->member = PORT_MASK_P2L(phys_member); + vlan4k->untag = PORT_MASK_P2L(phys_untag); + vlan4k->fid = FIELD_GET(RTL8365MB_CVLAN_ENTRY_D1_FID_MASK, data[1]); + vlan4k->priority_en = + FIELD_GET(RTL8365MB_CVLAN_ENTRY_D1_VBPEN_MASK, data[1]); + vlan4k->priority = + FIELD_GET(RTL8365MB_CVLAN_ENTRY_D1_VBPRI_MASK, data[1]); + vlan4k->policing_en = + FIELD_GET(RTL8365MB_CVLAN_ENTRY_D1_ENVLANPOL_MASK, data[1]); + vlan4k->meteridx = + FIELD_GET(RTL8365MB_CVLAN_ENTRY_D1_METERIDX_MASK, data[1]) | + (FIELD_GET(RTL8365MB_CVLAN_ENTRY_D2_METERIDX_EXT_MASK, data[2]) + << 5); + vlan4k->ivl_en = + FIELD_GET(RTL8365MB_CVLAN_ENTRY_D1_IVL_SVL_MASK, data[1]); + + return 0; +} + +static int rtl8365mb_get_vlan_4k(struct realtek_smi *smi, u32 vid, + struct rtl8366_vlan_4k *vlan4k) +{ + struct rtl8365mb_vlan_4k vlan4k_65mb; + int ret; + + ret = _rtl8365mb_get_vlan_4k(smi, vid, &vlan4k_65mb); + if (ret) + return ret; + + memset(vlan4k, 0, sizeof(*vlan4k)); + + vlan4k->vid = vlan4k_65mb.vid; + vlan4k->untag = vlan4k_65mb.untag; + vlan4k->member = vlan4k_65mb.member; + vlan4k->fid = vlan4k_65mb.fid; + + return 0; +} + +static int _rtl8365mb_set_vlan_4k(struct realtek_smi *smi, + const struct rtl8365mb_vlan_4k *vlan4k) +{ + struct rtl8365mb *mb = smi->chip_data; + u16 data[3] = { 0 }; + u32 phys_member; + u32 phys_untag; + + if ((vlan4k->member & ~(mb->port_mask)) || + (vlan4k->untag & ~(mb->port_mask)) || + vlan4k->vid > RTL8365MB_VIDMAX || vlan4k->fid > RTL8365MB_FIDMAX || + vlan4k->priority > RTL8365MB_PRIORITYMAX || + vlan4k->meteridx > RTL8365MB_METERMAX) + return -EINVAL; + + phys_member = PORT_MASK_L2P(vlan4k->member); + phys_untag = PORT_MASK_L2P(vlan4k->untag); + + /* Pack table entry value */ + data[0] |= FIELD_PREP(RTL8365MB_CVLAN_ENTRY_D0_MBR_MASK, phys_member); + data[0] |= FIELD_PREP(RTL8365MB_CVLAN_ENTRY_D0_UNTAG_MASK, phys_untag); + data[1] |= FIELD_PREP(RTL8365MB_CVLAN_ENTRY_D1_FID_MASK, vlan4k->fid); + data[1] |= FIELD_PREP(RTL8365MB_CVLAN_ENTRY_D1_VBPEN_MASK, + vlan4k->priority_en); + data[1] |= FIELD_PREP(RTL8365MB_CVLAN_ENTRY_D1_VBPRI_MASK, + vlan4k->priority); + data[1] |= FIELD_PREP(RTL8365MB_CVLAN_ENTRY_D1_ENVLANPOL_MASK, + vlan4k->policing_en); + data[1] |= FIELD_PREP(RTL8365MB_CVLAN_ENTRY_D1_METERIDX_MASK, + vlan4k->meteridx); + data[1] |= FIELD_PREP(RTL8365MB_CVLAN_ENTRY_D1_IVL_SVL_MASK, + vlan4k->ivl_en); + data[2] |= FIELD_PREP(RTL8365MB_CVLAN_ENTRY_D2_MBR_EXT_MASK, + phys_member >> 8); + data[2] |= FIELD_PREP(RTL8365MB_CVLAN_ENTRY_D2_UNTAG_EXT_MASK, + phys_untag >> 8); + data[2] |= FIELD_PREP(RTL8365MB_CVLAN_ENTRY_D2_METERIDX_EXT_MASK, + vlan4k->meteridx >> 5); + + return rtl8365mb_table_write(smi, RTL8365MB_TABLE_CVLAN, vlan4k->vid, + data, ARRAY_SIZE(data)); +} + +static int rtl8365mb_set_vlan_4k(struct realtek_smi *smi, + const struct rtl8366_vlan_4k *vlan4k) +{ + struct rtl8365mb_vlan_4k vlan4k_65mb = { 0 }; + + /* The RTL8365MB-VC has a more granular VLAN configuration than what is + * offered by the RTL8366x helper library. Extend this as you wish. + */ + vlan4k_65mb.vid = vlan4k->vid; + vlan4k_65mb.member = vlan4k->member; + vlan4k_65mb.untag = vlan4k->untag; + vlan4k_65mb.fid = vlan4k->fid; + + return _rtl8365mb_set_vlan_4k(smi, &vlan4k_65mb); +} + +static int _rtl8365mb_get_vlan_mc(struct realtek_smi *smi, u32 index, + struct rtl8365mb_vlan_mc *vlanmc) +{ + u32 phys_member; + u16 data[4]; + u32 val; + int ret; + int i; + + if (index >= smi->num_vlan_mc) + return -EINVAL; + + for (i = 0; i < 4; i++) { + ret = regmap_read(smi->map, RTL8365MB_VLAN_MC_REG(index) + i, + &val); + if (ret) + return ret; + + data[i] = val & 0xFFFF; + } + + memset(vlanmc, 0, sizeof(*vlanmc)); + + phys_member = FIELD_GET(RTL8365MB_VLAN_MC_D0_MBR_MASK, data[0]); + vlanmc->member = PORT_MASK_P2L(phys_member); + vlanmc->fid = FIELD_GET(RTL8365MB_VLAN_MC_D1_FID_MASK, data[1]); + vlanmc->meteridx = + FIELD_GET(RTL8365MB_VLAN_MC_D2_METERIDX_MASK, data[2]); + vlanmc->policing_en = + FIELD_GET(RTL8365MB_VLAN_MC_D2_ENVLANPOL_MASK, data[2]); + vlanmc->priority = FIELD_GET(RTL8365MB_VLAN_MC_D2_VBPRI_MASK, data[2]); + vlanmc->priority_en = + FIELD_GET(RTL8365MB_VLAN_MC_D2_VBPEN_MASK, data[2]); + vlanmc->evid = FIELD_GET(RTL8365MB_VLAN_MC_D3_EVID_MASK, data[3]); + + return 0; +} + +static int rtl8365mb_get_vlan_mc(struct realtek_smi *smi, u32 index, + struct rtl8366_vlan_mc *vlanmc) +{ + struct rtl8365mb_vlan_mc vlanmc_65mb; + struct rtl8365mb_vlan_4k vlan4k_65mb; + int ret; + + ret = _rtl8365mb_get_vlan_mc(smi, index, &vlanmc_65mb); + if (ret) + return ret; + + /* The untag field is not stored in the membership config, so grab it + * from the vlan4k table instead. This is mostly for compatibility with + * the RTL8366x helper library. + */ + ret = _rtl8365mb_get_vlan_4k(smi, vlanmc_65mb.evid, &vlan4k_65mb); + if (ret) + return ret; + + memset(vlanmc, 0, sizeof(*vlanmc)); + + vlanmc->vid = vlanmc_65mb.evid; + vlanmc->untag = vlan4k_65mb.untag; + vlanmc->member = vlanmc_65mb.member; + vlanmc->fid = vlanmc_65mb.fid; + vlanmc->priority = vlanmc_65mb.priority; + + return 0; +} + +static int _rtl8365mb_set_vlan_mc(struct realtek_smi *smi, u32 index, + const struct rtl8365mb_vlan_mc *vlanmc) +{ + struct rtl8365mb *mb = smi->chip_data; + u16 data[4] = { 0 }; + u32 phys_member; + int ret; + int i; + + if (index >= smi->num_vlan_mc || (vlanmc->member & ~(mb->port_mask)) || + vlanmc->evid > RTL8365MB_EVIDMAX || + vlanmc->fid > RTL8365MB_FIDMAX || + vlanmc->priority > RTL8365MB_PRIORITYMAX || + vlanmc->meteridx > RTL8365MB_METERMAX) + return -EINVAL; + + phys_member = PORT_MASK_L2P(vlanmc->member); + + data[0] |= FIELD_PREP(RTL8365MB_VLAN_MC_D0_MBR_MASK, phys_member); + data[1] |= FIELD_PREP(RTL8365MB_VLAN_MC_D1_FID_MASK, vlanmc->fid); + data[2] |= FIELD_PREP(RTL8365MB_VLAN_MC_D2_METERIDX_MASK, + vlanmc->meteridx); + data[2] |= FIELD_PREP(RTL8365MB_VLAN_MC_D2_ENVLANPOL_MASK, + vlanmc->policing_en); + data[2] |= + FIELD_PREP(RTL8365MB_VLAN_MC_D2_VBPRI_MASK, vlanmc->priority); + data[2] |= FIELD_PREP(RTL8365MB_VLAN_MC_D2_VBPEN_MASK, + vlanmc->priority_en); + data[3] |= FIELD_PREP(RTL8365MB_VLAN_MC_D3_EVID_MASK, vlanmc->evid); + + for (i = 0; i < 4; i++) { + ret = regmap_write(smi->map, RTL8365MB_VLAN_MC_REG(index) + i, + data[i]); + if (ret) + return ret; + } + + return 0; +} + +static int rtl8365mb_set_vlan_mc(struct realtek_smi *smi, u32 index, + const struct rtl8366_vlan_mc *vlanmc) +{ + struct rtl8365mb_vlan_mc vlanmc_65mb = { 0 }; + + vlanmc_65mb.evid = vlanmc->vid; + /* The untag field is set in the corresponding vlan4k entry */ + vlanmc_65mb.member = vlanmc->member; + vlanmc_65mb.fid = vlanmc->fid; + vlanmc_65mb.priority = vlanmc->priority; + + return _rtl8365mb_set_vlan_mc(smi, index, &vlanmc_65mb); +} + +static int rtl8365mb_get_mc_index(struct realtek_smi *smi, int port, int *index) +{ + int phys_port = PORT_NUM_L2P(port); + u32 val; + int ret; + + if (port >= smi->num_ports || *index >= smi->num_vlan_mc) + return -EINVAL; + + ret = regmap_read(smi->map, RTL8365MB_VLAN_PVID_CTRL_REG(phys_port), + &val); + if (ret) + return ret; + + *index = (val & (RTL8365MB_VLAN_PVID_CTRL_PORT_VIDX_MASK(phys_port))) >> + RTL8365MB_VLAN_PVID_CTRL_PORT_VIDX_OFFSET(phys_port); + + return 0; +} + +static int rtl8365mb_set_mc_index(struct realtek_smi *smi, int port, int index) +{ + int phys_port = PORT_NUM_L2P(port); + + if (port >= smi->num_ports || index >= smi->num_vlan_mc) + return -EINVAL; + + return regmap_update_bits( + smi->map, RTL8365MB_VLAN_PVID_CTRL_REG(phys_port), + RTL8365MB_VLAN_PVID_CTRL_PORT_VIDX_MASK(phys_port), + index << RTL8365MB_VLAN_PVID_CTRL_PORT_VIDX_OFFSET(phys_port)); +} + +static int rtl8365mb_ports_isolate(struct realtek_smi *smi) +{ + u32 phys_mask = PORT_MASK_L2P(BIT(smi->cpu_port)); + int ret; + int i; + + /* Isolate all ports by setting the forwarding mask for each port to + * BIT(cpu_port). The switch will then forward all frames from the user + * ports to the CPU port only. + * + * For the CPU port, the forwarding mask is effectively zero. The switch + * will then reject all non-CPU tagged frames from the CPU port, and + * honour the TX mask in all CPU tagged frames from the CPU port + * irrespective of the forwarding mask. + */ + for (i = 0; i < smi->num_ports; i++) { + u32 phys_port = PORT_NUM_L2P(i); + + ret = regmap_write(smi->map, + RTL8365MB_PORT_ISOLATION_REG(phys_port), + phys_mask); + if (ret) + return ret; + } + + return 0; +} + +static int rtl8365mb_get_mib_counter(struct realtek_smi *smi, int port, + struct rtl8366_mib_counter *mib, + u64 *mibvalue) +{ + int phys_port = PORT_NUM_L2P(port); + u32 offset; + u32 val; + int ret; + int i; + + /* The MIB address is an SRAM address. We request a particular address + * and then poll the control register before reading the value from some + * counter registers. + */ + ret = regmap_write(smi->map, RTL8365MB_MIB_ADDRESS_REG, + RTL8365MB_MIB_ADDRESS(phys_port, mib->offset)); + if (ret) + return ret; + + /* Poll for completion */ + ret = regmap_read_poll_timeout( + smi->map, RTL8365MB_MIB_CTRL0_REG, val, + (val & RTL8365MB_MIB_CTRL0_BUSY_FLAG_MASK) == 0, 10, 100); + if (ret) + return ret; + + /* Presumably this indicates a MIB counter read failure */ + if (val & RTL8365MB_MIB_CTRL0_RESET_FLAG_MASK) + return -EIO; + + /* There are four MIB counter registers each holding a 16 bit word of a + * MIB counter. Depending on the offset, we should read from the upper + * two or lower two registers. In case the MIB counter is 4 words, we + * read from all four registers. + */ + if (mib->length == 4) + offset = 3; + else + offset = (mib->offset + 1) % 4; + + /* Read the MIB counter 16 bits at a time */ + *mibvalue = 0; + for (i = 0; i < mib->length; i++) { + ret = regmap_read(smi->map, + RTL8365MB_MIB_COUNTER_REG(offset - i), &val); + if (ret) + return ret; + + *mibvalue = ((*mibvalue) << 16) | (val & 0xFFFF); + } + + return 0; +} + +static bool rtl8365mb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan) +{ + if (vlan > RTL8365MB_VIDMAX) + return false; + + return true; +} + +static int rtl8365mb_enable_vlan(struct realtek_smi *smi, bool enable) +{ + dev_dbg(smi->dev, "%s VLAN\n", enable ? "enable" : "disable"); + return regmap_update_bits( + smi->map, RTL8365MB_VLAN_CTRL_REG, RTL8365MB_VLAN_CTRL_EN_MASK, + FIELD_PREP(RTL8365MB_VLAN_CTRL_EN_MASK, enable ? 1 : 0)); +} + +static int rtl8365mb_enable_vlan4k(struct realtek_smi *smi, bool enable) +{ + return rtl8365mb_enable_vlan(smi, enable); +} + +static int rtl8365mb_get_and_clear_status_reg(struct realtek_smi *smi, u32 reg, + u32 *val) +{ + int ret; + + ret = regmap_read(smi->map, reg, val); + if (ret) + return ret; + + return regmap_write(smi->map, reg, *val); +} + +static irqreturn_t rtl8365mb_irq(int irq, void *data) +{ + struct realtek_smi *smi = data; + struct rtl8365mb *mb; + u32 line_changes = 0; + u32 linkdown_ind; + u32 linkup_ind; + u32 stat; + u32 val; + int ret; + + mb = smi->chip_data; + + ret = rtl8365mb_get_and_clear_status_reg(smi, RTL8365MB_INTR_STATUS_REG, + &stat); + if (ret) + goto out_error; + + if (stat & RTL8365MB_INTR_STATUS_LINK_CHANGE_MASK) { + ret = rtl8365mb_get_and_clear_status_reg( + smi, RTL8365MB_PORT_LINKUP_IND_REG, &val); + if (ret) + goto out_error; + + linkup_ind = FIELD_GET(RTL8365MB_PORT_LINKUP_IND_MASK, val); + + ret = rtl8365mb_get_and_clear_status_reg( + smi, RTL8365MB_PORT_LINKDOWN_IND_REG, &val); + if (ret) + goto out_error; + + linkdown_ind = FIELD_GET(RTL8365MB_PORT_LINKDOWN_IND_MASK, val); + + line_changes = PORT_MASK_P2L(linkup_ind | linkdown_ind) & + mb->phy_port_mask; + } + + if (!line_changes) + goto out_none; + + while (line_changes) { + int line = __ffs(line_changes); + int child_irq; + + line_changes &= ~BIT(line); + + child_irq = irq_find_mapping(smi->irqdomain, line); + handle_nested_irq(child_irq); + } + + return IRQ_HANDLED; + +out_error: + dev_err(smi->dev, "failed to read interrupt status: %d\n", ret); + +out_none: + return IRQ_NONE; +} + +static struct irq_chip rtl8365mb_irq_chip = { + .name = "rtl8365mb", + /* The hardware doesn't support masking IRQs on a per-port basis */ +}; + +static int rtl8365mb_irq_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(irq, domain->host_data); + irq_set_chip_and_handler(irq, &rtl8365mb_irq_chip, handle_simple_irq); + irq_set_nested_thread(irq, 1); + irq_set_noprobe(irq); + + return 0; +} + +static void rtl8365mb_irq_unmap(struct irq_domain *d, unsigned int irq) +{ + irq_set_nested_thread(irq, 0); + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); +} + +static const struct irq_domain_ops rtl8365mb_irqdomain_ops = { + .map = rtl8365mb_irq_map, + .unmap = rtl8365mb_irq_unmap, + .xlate = irq_domain_xlate_onecell, +}; + +static int _rtl8365mb_irq_enable(struct realtek_smi *smi, bool enable) +{ + return regmap_update_bits( + smi->map, RTL8365MB_INTR_CTRL, + RTL8365MB_INTR_CTRL_LINK_CHANGE_MASK, + FIELD_PREP(RTL8365MB_INTR_CTRL_LINK_CHANGE_MASK, + enable ? 1 : 0)); +} + +static int rtl8365mb_irq_enable(struct realtek_smi *smi) +{ + return _rtl8365mb_irq_enable(smi, true); +} + +static int rtl8365mb_irq_disable(struct realtek_smi *smi) +{ + return _rtl8365mb_irq_enable(smi, false); +} + +static int rtl8365mb_irq_setup(struct realtek_smi *smi) +{ + struct rtl8365mb *mb = smi->chip_data; + struct device_node *intc; + u32 irq_trig; + int virq; + int irq; + u32 val; + int ret; + int i; + + intc = of_get_child_by_name(smi->dev->of_node, "interrupt-controller"); + if (!intc) { + dev_err(smi->dev, "missing child interrupt-controller node\n"); + return -EINVAL; + } + + smi->irqdomain = irq_domain_add_linear(intc, mb->num_phys, + &rtl8365mb_irqdomain_ops, smi); + if (!smi->irqdomain) { + dev_err(smi->dev, "failed to add irq domain\n"); + ret = -ENOMEM; + goto out_put_node; + } + + for (i = 0; i < mb->num_phys; i++) { + virq = irq_create_mapping(smi->irqdomain, i); + if (!virq) { + dev_err(smi->dev, + "failed to create irq domain mapping\n"); + ret = -EINVAL; + goto out_remove_irqdomain; + } + + irq_set_parent(virq, irq); + } + + /* rtl8365mb IRQs cascade off this one */ + irq = of_irq_get(intc, 0); + if (irq <= 0) { + if (irq != -EPROBE_DEFER) + dev_err(smi->dev, "failed to get parent irq: %d\n", + irq); + ret = irq ? irq : -EINVAL; + goto out_remove_irqdomain; + } + + /* Configure chip interrupt signal polarity */ + irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + switch (irq_trig) { + case IRQF_TRIGGER_RISING: + case IRQF_TRIGGER_HIGH: + val = RTL8365MB_INTR_POLARITY_HIGH; + break; + case IRQF_TRIGGER_FALLING: + case IRQF_TRIGGER_LOW: + val = RTL8365MB_INTR_POLARITY_LOW; + break; + default: + dev_err(smi->dev, "unsupported irq trigger type %u\n", + irq_trig); + ret = -EINVAL; + goto out_remove_irqdomain; + } + + ret = regmap_update_bits(smi->map, RTL8365MB_INTR_POLARITY_REG, + RTL8365MB_INTR_POLARITY_MASK, + FIELD_PREP(RTL8365MB_INTR_POLARITY_MASK, val)); + if (ret) + goto out_remove_irqdomain; + + /* Disable the interrupt in case the chip has it enabled on reset */ + ret = rtl8365mb_irq_disable(smi); + if (ret) + goto out_remove_irqdomain; + + /* Clear the interrupt status register */ + ret = regmap_write(smi->map, RTL8365MB_INTR_STATUS_REG, + RTL8365MB_INTR_STATUS_ALL_MASK); + if (ret) + goto out_remove_irqdomain; + + ret = request_threaded_irq(irq, NULL, rtl8365mb_irq, IRQF_ONESHOT, + "rtl8365mb", smi); + if (ret) { + dev_err(smi->dev, "failed to request irq: %d\n", ret); + goto out_remove_irqdomain; + } + + /* Store the irq so that we know to free it during teardown */ + mb->irq = irq; + + ret = rtl8365mb_irq_enable(smi); + if (ret) + goto out_free_irq; + + of_node_put(intc); + + return 0; + +out_free_irq: + free_irq(mb->irq, smi); + mb->irq = 0; + +out_remove_irqdomain: + for (i = 0; i < mb->num_phys; i++) { + virq = irq_find_mapping(smi->irqdomain, i); + irq_dispose_mapping(virq); + } + + irq_domain_remove(smi->irqdomain); + smi->irqdomain = NULL; + +out_put_node: + of_node_put(intc); + + return ret; +} + +static void rtl8365mb_irq_teardown(struct realtek_smi *smi) +{ + struct rtl8365mb *mb = smi->chip_data; + int virq; + int i; + + if (mb->irq) { + free_irq(mb->irq, smi); + mb->irq = 0; + } + + if (smi->irqdomain) { + for (i = 0; i < mb->num_phys; i++) { + virq = irq_find_mapping(smi->irqdomain, i); + irq_dispose_mapping(virq); + } + + irq_domain_remove(smi->irqdomain); + smi->irqdomain = NULL; + } +} + +static int rtl8365mb_cpu_config(struct realtek_smi *smi) +{ + struct rtl8365mb *mb = smi->chip_data; + struct rtl8365mb_cpu *cpu = &mb->cpu; + u32 phys_mask; + u32 phys_trap_port; + u32 val; + int ret; + + phys_mask = PORT_MASK_L2P(cpu->mask); + phys_trap_port = PORT_NUM_L2P(cpu->trap_port); + + ret = regmap_update_bits(smi->map, RTL8365MB_CPU_PORT_MASK_REG, + RTL8365MB_CPU_PORT_MASK_MASK, + FIELD_PREP(RTL8365MB_CPU_PORT_MASK_MASK, + phys_mask)); + if (ret) + return ret; + + val = FIELD_PREP(RTL8365MB_CPU_CTRL_EN_MASK, cpu->enable ? 1 : 0) | + FIELD_PREP(RTL8365MB_CPU_CTRL_INSERTMODE_MASK, cpu->insert) | + FIELD_PREP(RTL8365MB_CPU_CTRL_TAG_POSITION_MASK, cpu->position) | + FIELD_PREP(RTL8365MB_CPU_CTRL_RXBYTECOUNT_MASK, cpu->rx_length) | + FIELD_PREP(RTL8365MB_CPU_CTRL_TAG_FORMAT_MASK, cpu->format) | + FIELD_PREP(RTL8365MB_CPU_CTRL_TRAP_PORT_MASK, phys_trap_port) | + FIELD_PREP(RTL8365MB_CPU_CTRL_TRAP_PORT_EXT_MASK, + phys_trap_port >> 3); + ret = regmap_write(smi->map, RTL8365MB_CPU_CTRL_REG, val); + if (ret) + return ret; + + return 0; +} + +static int rtl8365mb_switch_init(struct realtek_smi *smi) +{ + struct rtl8365mb *mb = smi->chip_data; + int ret; + int i; + + /* Do any chip-specific init jam before getting to the common stuff */ + if (mb->jam_table) { + for (i = 0; i < mb->jam_size; i++) { + ret = regmap_write(smi->map, mb->jam_table[i].reg, + mb->jam_table[i].val); + if (ret) + return ret; + } + } + + /* Common init jam */ + for (i = 0; i < ARRAY_SIZE(rtl8365mb_init_jam_common); i++) { + ret = regmap_write(smi->map, rtl8365mb_init_jam_common[i].reg, + rtl8365mb_init_jam_common[i].val); + if (ret) + return ret; + } + + return 0; +} + +static int rtl8365mb_reset_chip(struct realtek_smi *smi) +{ + u32 val; + + realtek_smi_write_reg_noack(smi, RTL8365MB_CHIP_RESET_REG, + FIELD_PREP(RTL8365MB_CHIP_RESET_HW_MASK, + 1)); + + /* Realtek documentation says the chip needs 1 second to reset. Sleep + * for 100 ms before accessing any registers to prevent ACK timeouts. + */ + msleep(100); + return regmap_read_poll_timeout( + smi->map, RTL8365MB_CHIP_RESET_REG, val, + (val & RTL8365MB_CHIP_RESET_HW_MASK) == 0, 20000, 1e6); +} + +static int rtl8365mb_setup(struct dsa_switch *ds) +{ + struct realtek_smi *smi = ds->priv; + struct rtl8365mb *mb; + int ret; + + mb = smi->chip_data; + + ret = rtl8365mb_reset_chip(smi); + if (ret) { + dev_err(smi->dev, "failed to reset chip: %d\n", ret); + return ret; + } + + /* Configure switch to vendor-defined initial state */ + ret = rtl8365mb_switch_init(smi); + if (ret) { + dev_err(smi->dev, "failed to initialize switch: %d\n", ret); + return ret; + } + + /* Configure CPU tagging */ + ret = rtl8365mb_cpu_config(smi); + if (ret) + return ret; + + /* Isolate all ports per DSA setup requirements */ + ret = rtl8365mb_ports_isolate(smi); + if (ret) + return ret; + + /* Set maximum packet length to 1536 bytes */ + ret = regmap_update_bits(smi->map, RTL8365MB_CFG0_MAX_LEN_REG, + RTL8365MB_CFG0_MAX_LEN_MASK, + FIELD_PREP(RTL8365MB_CFG0_MAX_LEN_MASK, 1536)); + if (ret) + return ret; + + /* Set up cascading IRQs */ + ret = rtl8365mb_irq_setup(smi); + if (ret == -EPROBE_DEFER) + return ret; + else if (ret) + dev_info(smi->dev, "no interrupt support\n"); + + ret = realtek_smi_setup_mdio(smi); + if (ret) { + dev_err(smi->dev, "could not set up MDIO bus\n"); + return -ENODEV; + } + + return ret; +} + +static void rtl8365mb_teardown(struct dsa_switch *ds) +{ + struct realtek_smi *smi = ds->priv; + + realtek_smi_teardown_mdio(smi); + rtl8365mb_irq_teardown(smi); +} + +static int rtl8365mb_get_chip_id_and_ver(struct regmap *map, u32 *id, u32 *ver) +{ + int ret; + + /* For some reason we have to write a magic value to an arbitrary + * register whenever accessing the chip ID/version registers. + */ + ret = regmap_write(map, RTL8365MB_MAGIC_REG, RTL8365MB_MAGIC_VALUE); + if (ret) + return ret; + + ret = regmap_read(map, RTL8365MB_CHIP_ID_REG, id); + if (ret) + return ret; + + ret = regmap_read(map, RTL8365MB_CHIP_VER_REG, ver); + if (ret) + return ret; + + /* Reset magic register */ + ret = regmap_write(map, RTL8365MB_MAGIC_REG, 0); + if (ret) + return ret; + + return 0; +} + +static int rtl8365mb_detect(struct realtek_smi *smi) +{ + struct rtl8365mb *mb = smi->chip_data; + u32 chip_id; + u32 chip_ver; + int ret; + + ret = rtl8365mb_get_chip_id_and_ver(smi->map, &chip_id, &chip_ver); + if (ret) { + dev_err(smi->dev, "failed to read chip id and version: %d\n", + ret); + return ret; + } + + switch (chip_id) { + case RTL8365MB_CHIP_ID_8365MB_VC: + dev_info(smi->dev, + "found an RTL8365MB-VC switch (ver=0x%04x)\n", + chip_ver); + + smi->cpu_port = RTL8365MB_CPU_PORT_NUM_8365MB_VC; + smi->num_ports = RTL8365MB_NUM_PORTS_8365MB_VC; + smi->num_vlan_mc = RTL8365MB_NUM_VLANS; + smi->mib_counters = rtl8365mb_mib_counters; + smi->num_mib_counters = ARRAY_SIZE(rtl8365mb_mib_counters); + + mb->chip_id = chip_id; + mb->chip_ver = chip_ver; + mb->num_phys = RTL8365MB_NUM_PHYS_8365MB_VC; + mb->port_mask = RTL8365MB_PORT_MASK_8365MB_VC; + mb->phy_port_mask = RTL8365MB_PHY_PORT_MASK_8365MB_VC; + mb->jam_table = rtl8365mb_init_jam_8365mb_vc; + mb->jam_size = ARRAY_SIZE(rtl8365mb_init_jam_8365mb_vc); + + mb->cpu.enable = 1; + mb->cpu.mask = BIT(smi->cpu_port); + mb->cpu.trap_port = smi->cpu_port; + mb->cpu.insert = RTL8365MB_CPU_INSERT_TO_ALL; + mb->cpu.position = RTL8365MB_CPU_POS_AFTER_SA; + mb->cpu.rx_length = RTL8365MB_CPU_RXLEN_64BYTES; + mb->cpu.format = RTL8365MB_CPU_FORMAT_8BYTES; + + break; + default: + dev_err(smi->dev, + "found an unknown Realtek switch (id=0x%04x, ver=0x%04x)\n", + chip_id, chip_ver); + return -ENODEV; + } + + return 0; +} + +static const struct dsa_switch_ops rtl8365mb_switch_ops = { + .get_tag_protocol = rtl8365mb_get_tag_protocol, + .setup = rtl8365mb_setup, + .teardown = rtl8365mb_teardown, + .phylink_validate = rtl8365mb_phylink_validate, + .phylink_mac_config = rtl8365mb_phylink_mac_config, + .phylink_mac_link_down = rtl8365mb_phylink_mac_link_down, + .phylink_mac_link_up = rtl8365mb_phylink_mac_link_up, + .get_strings = rtl8366_get_strings, + .get_ethtool_stats = rtl8366_get_ethtool_stats, + .get_sset_count = rtl8366_get_sset_count, + .port_vlan_filtering = rtl8365mb_port_vlan_filtering, + .port_vlan_add = rtl8366_vlan_add, + .port_vlan_del = rtl8366_vlan_del, + .port_enable = rtl8365mb_port_enable, + .port_disable = rtl8365mb_port_disable, +}; + +static const struct realtek_smi_ops rtl8365mb_smi_ops = { + .detect = rtl8365mb_detect, + .get_vlan_mc = rtl8365mb_get_vlan_mc, + .set_vlan_mc = rtl8365mb_set_vlan_mc, + .get_vlan_4k = rtl8365mb_get_vlan_4k, + .set_vlan_4k = rtl8365mb_set_vlan_4k, + .get_mc_index = rtl8365mb_get_mc_index, + .set_mc_index = rtl8365mb_set_mc_index, + .get_mib_counter = rtl8365mb_get_mib_counter, + .is_vlan_valid = rtl8365mb_is_vlan_valid, + .enable_vlan = rtl8365mb_enable_vlan, + .enable_vlan4k = rtl8365mb_enable_vlan4k, + .phy_read = rtl8365mb_phy_read, + .phy_write = rtl8365mb_phy_write, +}; + +const struct realtek_smi_variant rtl8365mb_variant = { + .ds_ops = &rtl8365mb_switch_ops, + .ops = &rtl8365mb_smi_ops, + .clk_delay = 10, + .cmd_read = 0xb9, + .cmd_write = 0xb8, + .chip_data_sz = sizeof(struct rtl8365mb), +}; +EXPORT_SYMBOL_GPL(rtl8365mb_variant); From patchwork Sun Aug 22 19:31:43 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Alvin_=C5=A0ipraga?= X-Patchwork-Id: 501757 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.5 required=3.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 65352C4320A for ; Sun, 22 Aug 2021 19:33:05 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 4BE0361266 for ; Sun, 22 Aug 2021 19:33:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233585AbhHVTdo (ORCPT ); Sun, 22 Aug 2021 15:33:44 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56324 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233159AbhHVTdk (ORCPT ); Sun, 22 Aug 2021 15:33:40 -0400 Received: from mail-ed1-x52d.google.com (mail-ed1-x52d.google.com [IPv6:2a00:1450:4864:20::52d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 36BDEC0613A4 for ; Sun, 22 Aug 2021 12:32:58 -0700 (PDT) Received: by mail-ed1-x52d.google.com with SMTP id n12so22735836edx.8 for ; Sun, 22 Aug 2021 12:32:58 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=pqrs.dk; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=+Nzh1d+N/uwFrWUnjgU0gqJLXBqT+FtWJdnjcrat3aI=; b=gpGjl8BxzvHz9UV3JmbcUDXQIAv2TRnxsYTg01PLqGl2yVE2/kHSC3pDWe5sLGCuJH 0vy33j7q/fygzO7L07lHikaP9rfsUdW9hhVtPhBStxS0TUeFe5ytmbFbEgCFDkLsZ1Hw XuRSoa1Zhme6SbTWde0YLNv2SwBa0rq23EFvI= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=+Nzh1d+N/uwFrWUnjgU0gqJLXBqT+FtWJdnjcrat3aI=; b=ZZNGdqIRQ0AN8uVTNGwYv5yPsxeOqJH83SFLHidxuM6QyWBSZ8/No4AuccUyfMhWHZ AvF2S9lJxnhCYE22sjknK8ofqPviFUt09nkkoB+VBk5ttFasuECRuu5Vak7e8vGJPj5M qM8g+ibrnEWalIm21nuaMrnSfrmnrOfBOtWEwrVdfV6Cv4NhIuq3aUcHIeXk4/J6nIcp mlLwFvYtT+FxPNC1o54rdDYiAI2Qo6yX/wpcmjWOnW9BK8gRX0Egpx5A7+4muV9b3QN8 jRIQzqJBUGb1W6XSSBYuandvf30jP/WSa4J7cZvBNpc8fk8JCD15/IrxeprnCYm40GFk W5IQ== X-Gm-Message-State: AOAM5315SyXKtMvZgMBuad68txLPnsmdixkM8UTm+5fQSDm6RVKqIQaj IU+xLiFfPcnC5Vaf60R3EKvREA== X-Google-Smtp-Source: ABdhPJxxTnZ46A2c3mivH/HQ4mtkhRWu6XqNbbL/KLMuoe3CcYrUP4qcFmpUgG2qFdxbuUsY7adFug== X-Received: by 2002:a05:6402:2158:: with SMTP id bq24mr34070883edb.8.1629660776839; Sun, 22 Aug 2021 12:32:56 -0700 (PDT) Received: from capella.. (80.71.142.18.ipv4.parknet.dk. [80.71.142.18]) by smtp.gmail.com with ESMTPSA id cn16sm7780053edb.9.2021.08.22.12.32.55 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 22 Aug 2021 12:32:56 -0700 (PDT) From: =?utf-8?q?Alvin_=C5=A0ipraga?= To: Linus Walleij , Andrew Lunn , Vivien Didelot , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Jakub Kicinski , Rob Herring , Heiner Kallweit , Russell King Cc: mir@bang-olufsen.dk, alvin@pqrs.dk, =?utf-8?q?Alvin_=C5=A0ipraga?= , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [RFC PATCH net-next 5/5] net: phy: realtek: add support for RTL8365MB-VC internal PHYs Date: Sun, 22 Aug 2021 21:31:43 +0200 Message-Id: <20210822193145.1312668-6-alvin@pqrs.dk> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20210822193145.1312668-1-alvin@pqrs.dk> References: <20210822193145.1312668-1-alvin@pqrs.dk> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org From: Alvin Šipraga The RTL8365MB-VC ethernet switch controller has 4 internal PHYs for its user-facing ports. All that is needed is to let the PHY driver core pick up the IRQ made available by the switch driver. Signed-off-by: Alvin Šipraga Reviewed-by: Florian Fainelli Reviewed-by: Linus Walleij --- drivers/net/phy/realtek.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 11be60333fa8..a5671ab896b3 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -1023,6 +1023,14 @@ static struct phy_driver realtek_drvs[] = { .resume = genphy_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc942), + .name = "RTL8365MB-VC Gigabit Ethernet", + /* Interrupt handling analogous to RTL8366RB */ + .config_intr = genphy_no_config_intr, + .handle_interrupt = genphy_handle_interrupt_no_ack, + .suspend = genphy_suspend, + .resume = genphy_resume, }, };