From patchwork Fri Nov 16 14:55:59 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Shawn Guo X-Patchwork-Id: 151344 Delivered-To: patch@linaro.org Received: by 2002:a2e:299d:0:0:0:0:0 with SMTP id p29-v6csp526178ljp; Fri, 16 Nov 2018 06:56:43 -0800 (PST) X-Google-Smtp-Source: AJdET5eRAeXymBUmxl54/TBQiwYsj31F8n4JvbrXEYVWcXhPw4oNlucU4kszfnYN5OXqvfwjvQN4 X-Received: by 2002:a17:902:9009:: with SMTP id a9-v6mr11269319plp.134.1542380203064; Fri, 16 Nov 2018 06:56:43 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1542380203; cv=none; d=google.com; s=arc-20160816; b=bVNZnM+NL0jpZIQNy92ke2BKG/4VBoxARvVIAIAkn0DPYwbodNjUYhg/sS9SbML07x 4wlcQ2YIznztjvTB//fhJMq93/tshAvfYNETu4wlI06wxnnuiawEXzvjZeck5RbCcIkW gGGqQ8UApHvHGOToKnVk39M8Yo2yNdJ79AVZOpCQ5HIDAslXC222dUo5hbKJta4tp2ot BbzyvWsYQGw0pWkNtQTYrl1U4PCpyxf4WTVqdtXt5uxfOK+ZEDAfNK5buHj85oBWJufw QXbb4WKXKLtQxnLXUumDO4ZjarJF3icgfbjGAoNGTJMgQ1Eb3AQtRdp0Wsf2Vugfnjan xDRA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:dkim-signature; bh=UQjk4Rg05HBmxCq80smCZ0gxp6u3vX7NhdG8q0LTYm8=; b=s6DAKGv1gpz+Onj67JBJ8iAiOrIPP3jAwM9fBaUu62XFp4mSA9dCOEuXmJwJBiVOd5 U9kFileapG+lgCHp/XfotnVZ6lDcXmADKz+a3solORtHLBGq41sU470QNVjhDUurclmW /W3p5DqLpxtyluo61NM01inOjNzaoI0j0v6GFkvA2+Nx8hq0vI9hE9Hf3rouW053uOW0 poOXeqxHUeFQoSQCVnHLxOA8PT5KS75l6WNq21SRmkUe2GBSXdIVzV1reY28BIrpxlVf dhBqWv9bA4jCmazbkCvMOkrCOUA5c5d7HduVodOsRTxzrK3+NNPQur8ZJTBgvH6T0tJ2 jRcw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b="DO8/wZIm"; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id v69si29413967pgd.284.2018.11.16.06.56.42; Fri, 16 Nov 2018 06:56:43 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b="DO8/wZIm"; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2389966AbeKQBJW (ORCPT + 32 others); Fri, 16 Nov 2018 20:09:22 -0500 Received: from mail-pg1-f194.google.com ([209.85.215.194]:43837 "EHLO mail-pg1-f194.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2389932AbeKQBJW (ORCPT ); Fri, 16 Nov 2018 20:09:22 -0500 Received: by mail-pg1-f194.google.com with SMTP id v28so215344pgk.10 for ; Fri, 16 Nov 2018 06:56:39 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=UQjk4Rg05HBmxCq80smCZ0gxp6u3vX7NhdG8q0LTYm8=; b=DO8/wZImQ1CQ5EmIZpx570j9ITal1kOJQsnZF7Gla1ZdxUl62BWAc8ASZ6dSXWNKeu BlL/DqYYO4V4SwbQln0PoNb4HYZ6YbfWtG+kFPMA2FUgPu0u0cgh5o6jWrbU+9zn5iD/ BFQmJ++c9K+jf3Z8ZVs0o+cExP0DGn40CNi6k= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=UQjk4Rg05HBmxCq80smCZ0gxp6u3vX7NhdG8q0LTYm8=; b=ZogRNFuG1RxAWDslzk2iOc/hXJ3szBwVvXS4AWbnpeL/R0owCLksDRe5XIV3UgCYev tSjN7RDziiN+wQE45+HTPoRxLdvQxNS6eqS9B62bsb06AefdO60u/8PRWeFoa22I7qGF ZUsM0y1NOfIhdbyYmsXPzwys5C+xZ5UHdA86iUNzR4LIxCWleGn/m40dYx3fOLtIXYog lgEQXuqw65HFTNjlFRnEhUssYYbTWcRtjXI9xP5aGZohjucoz47JIRJuqY74+LP3a1uw HFsGjq/7oc1MaWier+ksOwFK+r61UTNT7XTp6E+oeIMoG5P7ey42P3GDCrYIr6LV9JUy fT1g== X-Gm-Message-State: AGRZ1gJjWmE9gmsveCIkV507lw11ijGAacxYOMhrmPmRYNZIRqakEjjY ra4MqOJPvYCDKEiR0hPseP+h8w== X-Received: by 2002:a62:b2c3:: with SMTP id z64mr7915559pfl.120.1542380198924; Fri, 16 Nov 2018 06:56:38 -0800 (PST) Received: from localhost.localdomain (61-216-91-114.HINET-IP.hinet.net. [61.216.91.114]) by smtp.gmail.com with ESMTPSA id u6sm31591670pgr.79.2018.11.16.06.56.28 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Fri, 16 Nov 2018 06:56:37 -0800 (PST) From: Shawn Guo To: Kishon Vijay Abraham I Cc: Rob Herring , Sriharsha Allenki , Anu Ramanathan , Bjorn Andersson , Vinod Koul , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Shawn Guo Subject: [PATCH v3 2/2] phy: qualcomm: Add Synopsys High-Speed USB PHY driver Date: Fri, 16 Nov 2018 22:55:59 +0800 Message-Id: <20181116145559.31876-3-shawn.guo@linaro.org> X-Mailer: git-send-email 2.18.0 In-Reply-To: <20181116145559.31876-1-shawn.guo@linaro.org> References: <20181116145559.31876-1-shawn.guo@linaro.org> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org It adds Synopsys 28nm Femto High-Speed USB PHY driver support, which is usually paired with Synopsys DWC3 USB controllers on Qualcomm SoCs. Signed-off-by: Shawn Guo --- drivers/phy/qualcomm/Kconfig | 10 + drivers/phy/qualcomm/Makefile | 1 + .../phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c | 513 ++++++++++++++++++ 3 files changed, 524 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c -- 2.18.0 diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index 32f7d34eb784..c7b5ee82895d 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -82,3 +82,13 @@ config PHY_QCOM_USB_HSIC select GENERIC_PHY help Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. + +config PHY_QCOM_USB_HS_SNPS_28NM + tristate "Qualcomm Synopsys 28nm USB HS PHY driver" + depends on ARCH_QCOM || COMPILE_TEST + depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in + select GENERIC_PHY + help + Enable this to support the Synopsys 28nm Femto USB PHY on Qualcomm + chips. This driver supports the high-speed PHY which is usually + paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index c56efd3af205..dc238d95b18c 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-qcom-ufs-qmp-14nm.o obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o +obj-$(CONFIG_PHY_QCOM_USB_HS_SNPS_28NM) += phy-qcom-usb-hs-snsp-28nm.o diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c b/drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c new file mode 100644 index 000000000000..4e279059ed67 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c @@ -0,0 +1,513 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2009-2018, Linux Foundation. All rights reserved. + * Copyright (c) 2018, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* PHY register and bit definitions */ +#define PHY_CTRL_COMMON0 0x078 +#define SIDDQ BIT(2) +#define PHY_IRQ_CMD 0x0d0 +#define PHY_INTR_MASK0 0x0d4 +#define PHY_INTR_CLEAR0 0x0dc +#define DPDM_MASK 0x1e +#define DP_1_0 BIT(4) +#define DP_0_1 BIT(3) +#define DM_1_0 BIT(2) +#define DM_0_1 BIT(1) + +enum hsphy_voltage { + VOL_NONE, + VOL_MIN, + VOL_MAX, + VOL_NUM, +}; + +enum hsphy_vreg { + VDD, + VDDA_1P8, + VDDA_3P3, + VREG_NUM, +}; + +struct hsphy_init_seq { + int offset; + int val; + int delay; +}; + +struct hsphy_priv { + void __iomem *base; + struct clk_bulk_data *clks; + int num_clks; + struct reset_control *phy_reset; + struct reset_control *por_reset; + struct regulator_bulk_data vregs[VREG_NUM]; + unsigned int voltages[VREG_NUM][VOL_NUM]; + struct hsphy_init_seq *init_seq; + bool cable_connected; + struct extcon_dev *vbus_edev; + struct notifier_block vbus_notify; + enum phy_mode mode; +}; + +static int qcom_snps_hsphy_config_regulators(struct hsphy_priv *priv, int high) +{ + int old_uV[VREG_NUM]; + int min, ret, i; + + min = high ? 1 : 0; /* low or none? */ + + for (i = 0; i < VREG_NUM; i++) { + old_uV[i] = regulator_get_voltage(priv->vregs[i].consumer); + ret = regulator_set_voltage(priv->vregs[i].consumer, + priv->voltages[i][min], + priv->voltages[i][VOL_MAX]); + if (ret) + goto roll_back; + } + + return 0; + +roll_back: + for (; i >= 0; i--) + regulator_set_voltage(priv->vregs[i].consumer, + old_uV[i], old_uV[i]); + return ret; +} + +static int qcom_snps_hsphy_enable_regulators(struct hsphy_priv *priv) +{ + int ret; + + ret = qcom_snps_hsphy_config_regulators(priv, 1); + if (ret) + return ret; + + ret = regulator_set_load(priv->vregs[VDDA_1P8].consumer, 19000); + if (ret < 0) + goto unconfig_regulators; + + ret = regulator_set_load(priv->vregs[VDDA_3P3].consumer, 16000); + if (ret < 0) + goto unset_1p8_load; + + ret = regulator_bulk_enable(VREG_NUM, priv->vregs); + if (ret) + goto unset_3p3_load; + + return 0; + +unset_3p3_load: + regulator_set_load(priv->vregs[VDDA_3P3].consumer, 0); +unset_1p8_load: + regulator_set_load(priv->vregs[VDDA_1P8].consumer, 0); +unconfig_regulators: + qcom_snps_hsphy_config_regulators(priv, 0); + return ret; +} + +static void qcom_snps_hsphy_disable_regulators(struct hsphy_priv *priv) +{ + regulator_bulk_disable(VREG_NUM, priv->vregs); + regulator_set_load(priv->vregs[VDDA_1P8].consumer, 0); + regulator_set_load(priv->vregs[VDDA_3P3].consumer, 0); + qcom_snps_hsphy_config_regulators(priv, 0); +} + +static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode) +{ + struct hsphy_priv *priv = phy_get_drvdata(phy); + + priv->mode = mode; + + return 0; +} + +static void qcom_snps_hsphy_enable_hv_interrupts(struct hsphy_priv *priv) +{ + u32 val; + + /* Clear any existing interrupts before enabling the interrupts */ + val = readb(priv->base + PHY_INTR_CLEAR0); + val |= DPDM_MASK; + writeb(val, priv->base + PHY_INTR_CLEAR0); + + writeb(0x0, priv->base + PHY_IRQ_CMD); + usleep_range(200, 220); + writeb(0x1, priv->base + PHY_IRQ_CMD); + + /* Make sure the interrupts are cleared */ + usleep_range(200, 220); + + val = readb(priv->base + PHY_INTR_MASK0); + switch (priv->mode) { + case PHY_MODE_USB_HOST_HS: + case PHY_MODE_USB_HOST_FS: + case PHY_MODE_USB_DEVICE_HS: + case PHY_MODE_USB_DEVICE_FS: + val |= DP_1_0 | DM_0_1; + break; + case PHY_MODE_USB_HOST_LS: + case PHY_MODE_USB_DEVICE_LS: + val |= DP_0_1 | DM_1_0; + break; + default: + /* No device connected */ + val |= DP_0_1 | DM_0_1; + break; + } + writeb(val, priv->base + PHY_INTR_MASK0); +} + +static void qcom_snps_hsphy_disable_hv_interrupts(struct hsphy_priv *priv) +{ + u32 val; + + val = readb(priv->base + PHY_INTR_MASK0); + val &= ~DPDM_MASK; + writeb(val, priv->base + PHY_INTR_MASK0); + + /* Clear any pending interrupts */ + val = readb(priv->base + PHY_INTR_CLEAR0); + val |= DPDM_MASK; + writeb(val, priv->base + PHY_INTR_CLEAR0); + + writeb(0x0, priv->base + PHY_IRQ_CMD); + usleep_range(200, 220); + + writeb(0x1, priv->base + PHY_IRQ_CMD); + usleep_range(200, 220); +} + +static void qcom_snps_hsphy_enter_retention(struct hsphy_priv *priv) +{ + u32 val; + + val = readb(priv->base + PHY_CTRL_COMMON0); + val |= SIDDQ; + writeb(val, priv->base + PHY_CTRL_COMMON0); +} + +static void qcom_snps_hsphy_exit_retention(struct hsphy_priv *priv) +{ + u32 val; + + val = readb(priv->base + PHY_CTRL_COMMON0); + val &= ~SIDDQ; + writeb(val, priv->base + PHY_CTRL_COMMON0); +} + +static int qcom_snps_hsphy_vbus_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct hsphy_priv *priv = container_of(nb, struct hsphy_priv, + vbus_notify); + priv->cable_connected = !!event; + return 0; +} + +static int qcom_snps_hsphy_power_on(struct phy *phy) +{ + struct hsphy_priv *priv = phy_get_drvdata(phy); + int ret; + + if (priv->cable_connected) { + ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks); + if (ret) + return ret; + qcom_snps_hsphy_disable_hv_interrupts(priv); + } else { + ret = qcom_snps_hsphy_enable_regulators(priv); + if (ret) + return ret; + ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks); + if (ret) + return ret; + qcom_snps_hsphy_exit_retention(priv); + } + + return 0; +} + +static int qcom_snps_hsphy_power_off(struct phy *phy) +{ + struct hsphy_priv *priv = phy_get_drvdata(phy); + + if (priv->cable_connected) { + qcom_snps_hsphy_enable_hv_interrupts(priv); + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); + } else { + qcom_snps_hsphy_enter_retention(priv); + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); + qcom_snps_hsphy_disable_regulators(priv); + } + + return 0; +} + +static int qcom_snps_hsphy_reset(struct hsphy_priv *priv) +{ + int ret; + + ret = reset_control_assert(priv->phy_reset); + if (ret) + return ret; + + usleep_range(10, 15); + + ret = reset_control_deassert(priv->phy_reset); + if (ret) + return ret; + + usleep_range(80, 100); + + return 0; +} + +static void qcom_snps_hsphy_init_sequence(struct hsphy_priv *priv) +{ + struct hsphy_init_seq *seq; + + for (seq = priv->init_seq; seq->offset != -1; seq++) { + writeb(seq->val, priv->base + seq->offset); + if (seq->delay) + usleep_range(seq->delay, seq->delay + 10); + } + + /* Ensure that the above parameter overrides is successful. */ + mb(); +} + +static int qcom_snps_hsphy_por_reset(struct hsphy_priv *priv) +{ + int ret; + + ret = reset_control_assert(priv->por_reset); + if (ret) + return ret; + + /* + * The Femto PHY is POR reset in the following scenarios. + * + * 1. After overriding the parameter registers. + * 2. Low power mode exit from PHY retention. + * + * Ensure that SIDDQ is cleared before bringing the PHY + * out of reset. + */ + qcom_snps_hsphy_exit_retention(priv); + + /* + * As per databook, 10 usec delay is required between + * PHY POR assert and de-assert. + */ + usleep_range(10, 20); + ret = reset_control_deassert(priv->por_reset); + if (ret) + return ret; + + /* + * As per databook, it takes 75 usec for PHY to stabilize + * after the reset. + */ + usleep_range(80, 100); + + /* Ensure that RESET operation is completed. */ + mb(); + + return 0; +} + +static int qcom_snps_hsphy_init(struct phy *phy) +{ + struct hsphy_priv *priv = phy_get_drvdata(phy); + int state; + int ret; + + ret = qcom_snps_hsphy_reset(priv); + if (ret) + return ret; + + qcom_snps_hsphy_init_sequence(priv); + + ret = qcom_snps_hsphy_por_reset(priv); + if (ret) + return ret; + + /* Setup initial state */ + if (priv->vbus_edev) { + state = extcon_get_state(priv->vbus_edev, EXTCON_USB); + ret = qcom_snps_hsphy_vbus_notifier(&priv->vbus_notify, state, + priv->vbus_edev); + if (ret) + return ret; + } + + return 0; +} + +static const struct phy_ops qcom_snps_hsphy_ops = { + .init = qcom_snps_hsphy_init, + .power_on = qcom_snps_hsphy_power_on, + .power_off = qcom_snps_hsphy_power_off, + .set_mode = qcom_snps_hsphy_set_mode, + .owner = THIS_MODULE, +}; + +static const char * const qcom_snps_hsphy_clks[] = { + "ref", + "phy", + "sleep", +}; + +static int qcom_snps_hsphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *extcon_node; + struct phy_provider *provider; + struct hsphy_priv *priv; + struct resource *res; + struct phy *phy; + int size; + int ret; + int i; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->num_clks = ARRAY_SIZE(qcom_snps_hsphy_clks); + priv->clks = devm_kcalloc(dev, priv->num_clks, sizeof(*priv->clks), + GFP_KERNEL); + if (!priv->clks) + return -ENOMEM; + + for (i = 0; i < priv->num_clks; i++) + priv->clks[i].id = qcom_snps_hsphy_clks[i]; + + ret = devm_clk_bulk_get(dev, priv->num_clks, priv->clks); + if (ret) + return ret; + + priv->phy_reset = devm_reset_control_get(dev, "phy"); + if (IS_ERR(priv->phy_reset)) + return PTR_ERR(priv->phy_reset); + + priv->por_reset = devm_reset_control_get(dev, "por"); + if (IS_ERR(priv->por_reset)) + return PTR_ERR(priv->por_reset); + + priv->vregs[VDD].supply = "vdd"; + priv->vregs[VDDA_1P8].supply = "vdda1p8"; + priv->vregs[VDDA_3P3].supply = "vdda3p3"; + + ret = devm_regulator_bulk_get(dev, VREG_NUM, priv->vregs); + if (ret) + return ret; + + priv->voltages[VDDA_1P8][VOL_NONE] = 0; + priv->voltages[VDDA_1P8][VOL_MIN] = 1800000; + priv->voltages[VDDA_1P8][VOL_MAX] = 1800000; + + priv->voltages[VDDA_3P3][VOL_NONE] = 0; + priv->voltages[VDDA_3P3][VOL_MIN] = 3050000; + priv->voltages[VDDA_3P3][VOL_MAX] = 3300000; + + ret = of_property_read_u32_array(dev->of_node, "qcom,vdd-voltage-level", + priv->voltages[VDD], VOL_NUM); + if (ret) { + dev_err(dev, "failed to read qcom,vdd-voltage-level\n"); + return ret; + } + + size = of_property_count_u32_elems(dev->of_node, "qcom,init-seq"); + if (size < 0) + size = 0; + + /* + * The init-seq is a sequence of tuple which consists of 3 + * numbers . + */ + priv->init_seq = devm_kcalloc(dev, (size / 3) + 1, + sizeof(*priv->init_seq), GFP_KERNEL); + if (!priv->init_seq) + return -ENOMEM; + + ret = of_property_read_u32_array(dev->of_node, "qcom,init-seq", + (u32 *) priv->init_seq, size); + if (ret && size) + return ret; + + /* terminator */ + priv->init_seq[size / 3].offset = -1; + + phy = devm_phy_create(dev, dev->of_node, &qcom_snps_hsphy_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + extcon_node = of_graph_get_remote_node(dev->of_node, -1, -1); + if (extcon_node) { + priv->vbus_edev = extcon_find_edev_by_node(extcon_node); + if (IS_ERR(priv->vbus_edev)) { + if (PTR_ERR(priv->vbus_edev) != -ENODEV) { + of_node_put(extcon_node); + return PTR_ERR(priv->vbus_edev); + } + priv->vbus_edev = NULL; + } + } + of_node_put(extcon_node); + + if (priv->vbus_edev) { + priv->vbus_notify.notifier_call = qcom_snps_hsphy_vbus_notifier; + ret = devm_extcon_register_notifier(dev, priv->vbus_edev, + EXTCON_USB, + &priv->vbus_notify); + if (ret) + return ret; + } + + phy_set_drvdata(phy, priv); + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id qcom_snps_hsphy_match[] = { + { .compatible = "qcom,qcs404-usb-hsphy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_match); + +static struct platform_driver qcom_snps_hsphy_driver = { + .probe = qcom_snps_hsphy_probe, + .driver = { + .name = "qcom-usb-snps-hsphy", + .of_match_table = qcom_snps_hsphy_match, + }, +}; +module_platform_driver(qcom_snps_hsphy_driver); + +MODULE_DESCRIPTION("Qualcomm Synopsys 28nm USB High-Speed PHY driver"); +MODULE_LICENSE("GPL v2");