From patchwork Thu Feb 17 18:42:52 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matthias Kaehlcke X-Patchwork-Id: 543682 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8B709C4332F for ; Thu, 17 Feb 2022 18:43:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S244526AbiBQSnX (ORCPT ); Thu, 17 Feb 2022 13:43:23 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:45368 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S244520AbiBQSnW (ORCPT ); Thu, 17 Feb 2022 13:43:22 -0500 Received: from mail-pj1-x102d.google.com (mail-pj1-x102d.google.com [IPv6:2607:f8b0:4864:20::102d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 27AC1E034 for ; Thu, 17 Feb 2022 10:43:07 -0800 (PST) Received: by mail-pj1-x102d.google.com with SMTP id om7so6424023pjb.5 for ; Thu, 17 Feb 2022 10:43:07 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=6IUCcm+Xv8CevqetI7u2KdRt47l5psRZKi3kkjgGmu4=; b=D5qGn9RS8fKps1ygiiiA7oCQ2S6DH/tdHqBGidSFqAx6pfr+S0uf0j0jpEENFsiyoJ Hv13aj3rT1LldQa0Z6HY7kIVb0v47q8ZgYP/tL3ZPV6yUb6yg7tL7hCRTugRJgoWzBUJ PM7ydl5Ib1PJH/SGFfCd1zpkTSdOwp/dC/bqw= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=6IUCcm+Xv8CevqetI7u2KdRt47l5psRZKi3kkjgGmu4=; b=tNIi9JsOGKk/eXjdM34sQikY9qA8E7K5KaZk8+jypcO0eUyS2A0dIZgWMK3gH00rgM h0Cjp/C4t70VWYws9wFUNjwODFogoJATmlMee8G3wBmi0IAxbFsOD+ePHB/w8EHg933f aUC9loLIbSLF+VNKrtzixPhVIItSHKLWZQUG61abcxDUBVmuc6TZgBNSRFpBeQ9ltA75 X/WGHEVcpSaTIAKXA6wzCaZ/TxLS3345Mgm7T+sBLQvzXHBDGgbjjRwkZxT0Z3wmNR70 GPa6TEktLu8bDEnXkRn9PtxS3nM1vQHR4uVW3gNea4jIXS+t5JiyJ8Uc2BTbYCmtER8c jtSw== X-Gm-Message-State: AOAM533InB0wksg+UcuvgjQjzFRmCv98QX1oAVQahRbOpVgYvc2/blxf nDJolY+t7PDXWP8ddSOE3BKsUg== X-Google-Smtp-Source: ABdhPJwxXLV76Yfk3oRUaeH9SCUlA4Jogb+q7Sy+2Pc7si2QBPYdC6e6Wk6BIy7AjeATNqnWXDOXVA== X-Received: by 2002:a17:902:ce11:b0:14a:a6aa:4fa6 with SMTP id k17-20020a170902ce1100b0014aa6aa4fa6mr3948885plg.149.1645123386679; Thu, 17 Feb 2022 10:43:06 -0800 (PST) Received: from localhost ([2620:15c:202:201:b42d:98cc:5dcc:5ef5]) by smtp.gmail.com with UTF8SMTPSA id c23sm296081pfi.136.2022.02.17.10.43.05 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Thu, 17 Feb 2022 10:43:06 -0800 (PST) From: Matthias Kaehlcke To: Greg Kroah-Hartman , Alan Stern , Rob Herring , Frank Rowand , Mathias Nyman , Felipe Balbi Cc: linux-usb@vger.kernel.org, Ravi Chandra Sadineni , Roger Quadros , linux-kernel@vger.kernel.org, Bastien Nocera , Douglas Anderson , Michal Simek , Stephen Boyd , devicetree@vger.kernel.org, Krzysztof Kozlowski , Peter Chen , Matthias Kaehlcke , Rob Herring Subject: [PATCH v21 1/3] of/platform: Add stubs for of_platform_device_create/destroy() Date: Thu, 17 Feb 2022 10:42:52 -0800 Message-Id: <20220217104219.v21.1.I08fd2e1c775af04f663730e9fb4d00e6bbb38541@changeid> X-Mailer: git-send-email 2.35.1.473.g83b2b277ed-goog In-Reply-To: <20220217184254.4141705-1-mka@chromium.org> References: <20220217184254.4141705-1-mka@chromium.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Code for platform_device_create() and of_platform_device_destroy() is only generated if CONFIG_OF_ADDRESS=y. Add stubs to avoid unresolved symbols when CONFIG_OF_ADDRESS is not set. Signed-off-by: Matthias Kaehlcke Acked-by: Rob Herring Reviewed-by: Stephen Boyd Reviewed-by: Douglas Anderson --- Changes in v21: - none Changes in v20: - added 'Reviewed-by' tags from Stephen and Doug Changes in v19: - still no changes ... Changes in v18: - still no changes ... Changes in v17: - none Changes in v16: - none Changes in v15: - none Changes in v14: - none Changes in v13: - none Changes in v12: - none Changes in v11: - none Changes in v10: - none Changes in v9: - added Rob's 'Acked-by' tag Changes in v8: - fixed C&P error in commit message Changes in v7: - none Changes in v6: - patch added to the series include/linux/of_platform.h | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index 84a966623e78..d15b6cd5e1c3 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -61,16 +61,18 @@ static inline struct platform_device *of_find_device_by_node(struct device_node } #endif +extern int of_platform_bus_probe(struct device_node *root, + const struct of_device_id *matches, + struct device *parent); + +#ifdef CONFIG_OF_ADDRESS /* Platform devices and busses creation */ extern struct platform_device *of_platform_device_create(struct device_node *np, const char *bus_id, struct device *parent); extern int of_platform_device_destroy(struct device *dev, void *data); -extern int of_platform_bus_probe(struct device_node *root, - const struct of_device_id *matches, - struct device *parent); -#ifdef CONFIG_OF_ADDRESS + extern int of_platform_populate(struct device_node *root, const struct of_device_id *matches, const struct of_dev_auxdata *lookup, @@ -84,6 +86,18 @@ extern int devm_of_platform_populate(struct device *dev); extern void devm_of_platform_depopulate(struct device *dev); #else +/* Platform devices and busses creation */ +static inline struct platform_device *of_platform_device_create(struct device_node *np, + const char *bus_id, + struct device *parent) +{ + return NULL; +} +static inline int of_platform_device_destroy(struct device *dev, void *data) +{ + return -ENODEV; +} + static inline int of_platform_populate(struct device_node *root, const struct of_device_id *matches, const struct of_dev_auxdata *lookup, From patchwork Thu Feb 17 18:42:53 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Matthias Kaehlcke X-Patchwork-Id: 544051 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5C3DEC433FE for ; Thu, 17 Feb 2022 18:43:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S244555AbiBQSna (ORCPT ); Thu, 17 Feb 2022 13:43:30 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:45748 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S244538AbiBQSn1 (ORCPT ); Thu, 17 Feb 2022 13:43:27 -0500 Received: from mail-pl1-x634.google.com (mail-pl1-x634.google.com [IPv6:2607:f8b0:4864:20::634]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 74A4AE034 for ; Thu, 17 Feb 2022 10:43:09 -0800 (PST) Received: by mail-pl1-x634.google.com with SMTP id u5so5279588ple.3 for ; Thu, 17 Feb 2022 10:43:09 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=W03GQmtFXCMBNr9erkhX73NYNPLp3W1mDJHQTh2UIUc=; b=davBpXPSYMVhpJ5GqNU4EtEHzcFyH3WdFsl/RA6qOUi8iI5KHSFAExk4EhPdliTsUW QNpT0+JtZl5acSrS85b8CYeWb5OmQuUUV+Ign7to7LbujZ5BcrEdu5BfBGXrEqg0oNWq 6G/NEVzmwxpQYTXK2xgDRfDQ79caS0AuPP4pY= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=W03GQmtFXCMBNr9erkhX73NYNPLp3W1mDJHQTh2UIUc=; b=2U61UXhDrrXuDLPKMmO10HvpQql+jRwZEMrdzSb8uKB7U7IbbyXH4SiO4Lkin6pVfz 8hWsjBH7TbhyWBbR+Rip8dZpDp9lp/sfFQGUHOGMxj9mJQwMiq+Tdet0Y2q7/+e2SHvL B0RMlGFjxbNW6pjDDnhLlFi2eDuC587W6Wb/j0uR1Wjgu1UUlH6Tf55LTpR5C2DbJm16 G3YwlXxUVMzfilhejo9rjMmxcphCrsm+UeM8eDSKVCT93lYxFIPHNzA+vTGYp09ArFia 59efwljFlvoj7/SQu8m+qIZ6iW4j5t6lGh6wfLHJP3A6ns8863+MMfTxh/SouEUzJx5P FvwA== X-Gm-Message-State: AOAM533wnUzcSOPpnQ67Hfu8zXzaGe6xEZBZL1VaW1/d3Vu+ZALVb278 n7bGOpjdXUpcKQD8Hl0uTMF4Yw== X-Google-Smtp-Source: ABdhPJzhLVlkn2m2KM1Fiw7JWnKCMTAklrcE4ebfOV2DR0KV/gY+XayykOXS56rLu12EvkUD2mm4OQ== X-Received: by 2002:a17:90a:bf05:b0:1b9:cb97:706 with SMTP id c5-20020a17090abf0500b001b9cb970706mr8641051pjs.207.1645123388733; Thu, 17 Feb 2022 10:43:08 -0800 (PST) Received: from localhost ([2620:15c:202:201:b42d:98cc:5dcc:5ef5]) by smtp.gmail.com with UTF8SMTPSA id h5sm297500pfc.69.2022.02.17.10.43.07 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Thu, 17 Feb 2022 10:43:08 -0800 (PST) From: Matthias Kaehlcke To: Greg Kroah-Hartman , Alan Stern , Rob Herring , Frank Rowand , Mathias Nyman , Felipe Balbi Cc: linux-usb@vger.kernel.org, Ravi Chandra Sadineni , Roger Quadros , linux-kernel@vger.kernel.org, Bastien Nocera , Douglas Anderson , Michal Simek , Stephen Boyd , devicetree@vger.kernel.org, Krzysztof Kozlowski , Peter Chen , Matthias Kaehlcke Subject: [PATCH v21 2/3] usb: misc: Add onboard_usb_hub driver Date: Thu, 17 Feb 2022 10:42:53 -0800 Message-Id: <20220217104219.v21.2.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid> X-Mailer: git-send-email 2.35.1.473.g83b2b277ed-goog In-Reply-To: <20220217184254.4141705-1-mka@chromium.org> References: <20220217184254.4141705-1-mka@chromium.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org The main issue this driver addresses is that a USB hub needs to be powered before it can be discovered. For discrete onboard hubs (an example for such a hub is the Realtek RTS5411) this is often solved by supplying the hub with an 'always-on' regulator, which is kind of a hack. Some onboard hubs may require further initialization steps, like changing the state of a GPIO or enabling a clock, which requires even more hacks. This driver creates a platform device representing the hub which performs the necessary initialization. Currently it only supports switching on a single regulator, support for multiple regulators or other actions can be added as needed. Different initialization sequences can be supported based on the compatible string. Besides performing the initialization the driver can be configured to power the hub off during system suspend. This can help to extend battery life on battery powered devices which have no requirements to keep the hub powered during suspend. The driver can also be configured to leave the hub powered when a wakeup capable USB device is connected when suspending, and power it off otherwise. Technically the driver consists of two drivers, the platform driver described above and a very thin USB driver that subclasses the generic driver. The purpose of this driver is to provide the platform driver with the USB devices corresponding to the hub(s) (a hub controller may provide multiple 'logical' hubs, e.g. one to support USB 2.0 and another for USB 3.x). Note: the current series only supports hubs connected directly to a root hub, support for other configurations could be added if needed. Co-developed-by: Ravi Chandra Sadineni Signed-off-by: Ravi Chandra Sadineni Signed-off-by: Matthias Kaehlcke Acked-by: Alan Stern Reviewed-by: Douglas Anderson --- Changes in v21: - refactored _find_onboard_hub() - check presence of drvdata instead of using device_is_bound() - return -ENODEV if the platform device can't be found - always check drvdata, not only when looking for the companion hub - added comment explaining probe deferral - removed 'onboard_hub_dev' symlinks from USB devices - updated documentation of 'always_powered_in_suspend' sysfs attribute Changes in v20: - s/nontrivial/non-trivial/ in Kconfig doc - added include of 'export.h' - initialize variable 'power_off' in onboard_hub_suspend() at declaration time - renamed set_udev_link_name() to get_udev_link_name() - use kzalloc to allocate struct usbdev_node instead of devm_kzalloc() - release the lock in onboard_hub_add_usbdev() before calling get_udev_link_name() - free struct usbdev_node in onboard_hub_remove_usbdev(), now that it doesn't used managed memory - make struct onboard_hub const in always_powered_in_suspend_show() - call put_device() if pdev is not bound in _find_onboard_hub() - get driver data before calling put_device() in _find_onboard_hub() - log platform device name when sysfs link creation fails in onboard_hub_usbdev_probe() - added kernel doc for onboard_hub_create_pdevs() and onboard_hub_destroy_pdevs() - added 'Reviewed-by' tag from Doug Changes in v19: - added VID:PID pairs and compatible strings for RTS5414 hub - updated comments with RTS5411 USB versions to reflect those reported/supported by the hub Changes in v18: - introduced hidden Kconfig option to align module vs. builtin choice with CONFIG_USB (thanks Doug!) - refactored onboard_hub_create_pdevs() Changes in v17: - updated date and kernel version in ABI documentation for 'always_powered_in_suspend' attribute - removed obsolete .yaml entry from MAINTAINERS file - added entry for ABI documentation to MAINTAINERS file - renamed struct 'udev_node' to 'usbdev_node' - changed return logic in onboard_hub_suspend/resume() to get rid of 'rc' variable - added helper set_udev_link_name() to set link names for onboard hub USB devices - use of_parse_phandle() instead of of_property_read_u32() + of_find_node_by_phandle() combo - defer probing in _find_onboard_hub() if the platform device isn't bound yet - initialize list head passed as parameter to onboard_hub_create_pdevs() instead of relying on the caller to do so - don't require the 'companion-hub' property to be specified. This is needed to support hubs without companion hub - use devm_kzalloc() to allocate platform device list entries and stop freeing them explicitly - remove unnecessary INIT_LIST_HEAD() of platform device list entries - use '%pOF' to print DT node name - delete platform device list entries from the list of devices in onboard_hub_destroy_pdevs(). It shouldn't be strictly necessary, but better be on the safe side. Changes in v16: - none Changes in v15: - none Changes in v14: - none Changes in v13: - none Changes in v12: - use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE) in onboard_hub.h to also check for the driver built as module - include onboard_hub.h again from the driver to make sure there are prototype declarations for the public functions - remove indentation from label in onboard_hub_create_pdevs() Changes in v11: - added onboard_hub_create/destroy_pdevs() helpers, to support multiple onboard hubs connected to the same parent hub - don't include ‘onboard_hub.h’ from the onboard hub driver - updated commit message - added ‘Acked-by' from Alan Changes in v10: - always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m Changes in v9: - none Changes in v8: - none Changes in v7: - don't declare stub for of_is_onboard_usb_hub() when CONFIG_COMPILE_TEST is defined Changes in v6: - use 'companion-hub' to locate the platform device, instead of scanning through the nodes of the parent - added ABI documentation for 'always_powered_in_suspend' - sysfs_emit() instead of sprintf() in always_powered_in_suspend_show() - register sysfs attribute through driver.dev_groups - evaluate return value of driver_attach() in _probe() - use dev_warn() instead of WARN_ON() in _probe() - include 'onboard_hub.h' Changes in v5: - the platform device is now instantiated from the same DT node as the 'primary' USB hub device - use the USB compatible strings for the platform device - refactored _find_onboard_hub() to search the parents child nodes for a platform device with a matching compatible string - added exported function of_is_onboard_usb_hub() to allow other drivers (like xhci_plat) to check if one of their child DT nodes is a supported hub - use late suspend to make sure info about wakeup enabled descendants is updated - call driver_attach() for the USB driver in onboard_hub_probe() to make sure the driver is re-attached after the device_release_driver() calls in onboard_hub_remove() - renamed sysfs attribute 'power_off_in_suspend' to 'always_powered_in_suspend' - added sysfs symlinks between platform device and USB devices - marked 'onboard_hub_pm_ops' as __maybe_unused - removed 'realtek' compatible string which is not needed at this point - fix log for regulator_disable() failure Changes in v4: - updated Kconfig documentation - changed the loop in onboard_hub_remove() to release the hub lock before unbinding the USB device and make self deadlock prevention less clunky - fixed return value in onboard_hub_usbdev_probe() - added entry to MAINTAINERS file Changes in v3: - updated the commit message - updated description in Kconfig - remove include of 'core/usb.h' - use 'is_powered_on' flag instead of 'has_wakeup_capable_descendants' - added 'going_away' flag to struct onboard_hub - don't allow adding new USB devices when the platform device is going away - don't bother with deleting the list item in onboard_hub_remove_usbdev() when the platform device is going away - don't assume in onboard_hub_suspend() that all USB hub devices are connected to the same controller - removed unnecessary devm_kfree() from onboard_hub_remove_usbdev() - fixed error handling in onboard_hub_remove_usbdev() - use kstrtobool() instead of strtobool() in power_off_in_suspend_store() - unbind USB devices in onboard_hub_remove() to avoid dangling references to the platform device - moved put_device() for platform device to _find_onboard_hub() - changed return value of onboard_hub_remove_usbdev() to void - evaluate return value of onboard_hub_add_usbdev() - register 'power_off_in_suspend' as managed device attribute - use USB_DEVICE macro instead manual initialization - add unwinding to onboard_hub_init() - updated MODULE_DESCRIPTION - use module_init() instead of device_initcall() Changes in v2: - check wakeup enabled state of the USB controller instead of using 'wakeup-source' property - use sysfs attribute instead of DT property to determine if the hub should be powered off at all during system suspend - added missing brace in onboard_hub_suspend() - updated commit message - use pm_ptr for pm_ops as suggested by Alan Changes in v1: - renamed the driver to 'onboard_usb_hub' - single file for platform and USB driver - USB hub devices register with the platform device - the DT includes a phandle of the platform device - the platform device now controls when power is turned off - the USB driver became a very thin subclass of the generic USB driver - enabled autosuspend support .../sysfs-bus-platform-onboard-usb-hub | 8 + MAINTAINERS | 7 + drivers/usb/misc/Kconfig | 23 + drivers/usb/misc/Makefile | 1 + drivers/usb/misc/onboard_usb_hub.c | 510 ++++++++++++++++++ include/linux/usb/onboard_hub.h | 18 + 6 files changed, 567 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub create mode 100644 drivers/usb/misc/onboard_usb_hub.c create mode 100644 include/linux/usb/onboard_hub.h diff --git a/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub b/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub new file mode 100644 index 000000000000..af818d9d90c1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub @@ -0,0 +1,8 @@ +What: /sys/bus/platform/devices//always_powered_in_suspend +Date: February 2022 +KernelVersion: 5.18 +Contact: Matthias Kaehlcke + linux-usb@vger.kernel.org +Description: + (RW) Controls whether the USB hub remains always powered + during system suspend or not. \ No newline at end of file diff --git a/MAINTAINERS b/MAINTAINERS index fca970a46e77..39cdbab622f0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14352,6 +14352,13 @@ S: Maintained T: git git://linuxtv.org/media_tree.git F: drivers/media/i2c/ov9734.c +ONBOARD USB HUB DRIVER +M: Matthias Kaehlcke +L: linux-usb@vger.kernel.org +S: Maintained +F: Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub +F: drivers/usb/misc/onboard_usb_hub.c + ONENAND FLASH DRIVER M: Kyungmin Park L: linux-mtd@lists.infradead.org diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 8f1144359012..99bc262a41f6 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -284,3 +284,26 @@ config BRCM_USB_PINMAP This option enables support for remapping some USB external signals, which are typically on dedicated pins on the chip, to any gpio. + +config USB_ONBOARD_HUB + bool "Onboard USB hub support" + depends on OF || COMPILE_TEST + help + Say Y here if you want to support discrete onboard USB hubs that + don't require an additional control bus for initialization, but + need some non-trivial form of initialization, such as enabling a + power regulator. An example for such a hub is the Realtek + RTS5411. + + This driver can be used as a module but its state (module vs + builtin) must match the state of the USB subsystem. Enabling + this config will enable the driver and it will automatically + match the state of the USB subsystem. If this driver is a + module it will be called onboard_usb_hub. + +if USB_ONBOARD_HUB +config USB_ONBOARD_HUB_ACTUAL + tristate + default m if USB=m + default y if USB=y +endif diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 5f4e598573ab..9549b88c2cc1 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -32,3 +32,4 @@ obj-$(CONFIG_USB_CHAOSKEY) += chaoskey.o obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ obj-$(CONFIG_USB_LINK_LAYER_TEST) += lvstest.o obj-$(CONFIG_BRCM_USB_PINMAP) += brcmstb-usb-pinmap.o +obj-$(CONFIG_USB_ONBOARD_HUB_ACTUAL) += onboard_usb_hub.o diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c new file mode 100644 index 000000000000..34f7e4885b2e --- /dev/null +++ b/drivers/usb/misc/onboard_usb_hub.c @@ -0,0 +1,510 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for onboard USB hubs + * + * Copyright (c) 2022, Google LLC + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct usb_device_driver onboard_hub_usbdev_driver; + +/************************** Platform driver **************************/ + +struct usbdev_node { + struct usb_device *udev; + struct list_head list; +}; + +struct onboard_hub { + struct regulator *vdd; + struct device *dev; + bool always_powered_in_suspend; + bool is_powered_on; + bool going_away; + struct list_head udev_list; + struct mutex lock; +}; + +static int onboard_hub_power_on(struct onboard_hub *hub) +{ + int err; + + err = regulator_enable(hub->vdd); + if (err) { + dev_err(hub->dev, "failed to enable regulator: %d\n", err); + return err; + } + + hub->is_powered_on = true; + + return 0; +} + +static int onboard_hub_power_off(struct onboard_hub *hub) +{ + int err; + + err = regulator_disable(hub->vdd); + if (err) { + dev_err(hub->dev, "failed to disable regulator: %d\n", err); + return err; + } + + hub->is_powered_on = false; + + return 0; +} + +static int __maybe_unused onboard_hub_suspend(struct device *dev) +{ + struct onboard_hub *hub = dev_get_drvdata(dev); + struct usbdev_node *node; + bool power_off = true; + + if (hub->always_powered_in_suspend) + return 0; + + mutex_lock(&hub->lock); + + list_for_each_entry(node, &hub->udev_list, list) { + if (!device_may_wakeup(node->udev->bus->controller)) + continue; + + if (usb_wakeup_enabled_descendants(node->udev)) { + power_off = false; + break; + } + } + + mutex_unlock(&hub->lock); + + if (!power_off) + return 0; + + return onboard_hub_power_off(hub); +} + +static int __maybe_unused onboard_hub_resume(struct device *dev) +{ + struct onboard_hub *hub = dev_get_drvdata(dev); + + if (hub->is_powered_on) + return 0; + + return onboard_hub_power_on(hub); +} + +static inline void get_udev_link_name(const struct usb_device *udev, char *buf, size_t size) +{ + snprintf(buf, size, "usb_dev.%s", dev_name(&udev->dev)); +} + +static int onboard_hub_add_usbdev(struct onboard_hub *hub, struct usb_device *udev) +{ + struct usbdev_node *node; + char link_name[64]; + int err; + + mutex_lock(&hub->lock); + + if (hub->going_away) { + err = -EINVAL; + goto error; + } + + node = kzalloc(sizeof(*node), GFP_KERNEL); + if (!node) { + err = -ENOMEM; + goto error; + } + + node->udev = udev; + + list_add(&node->list, &hub->udev_list); + + mutex_unlock(&hub->lock); + + get_udev_link_name(udev, link_name, sizeof(link_name)); + WARN_ON(sysfs_create_link(&hub->dev->kobj, &udev->dev.kobj, link_name)); + + return 0; + +error: + mutex_unlock(&hub->lock); + + return err; +} + +static void onboard_hub_remove_usbdev(struct onboard_hub *hub, const struct usb_device *udev) +{ + struct usbdev_node *node; + char link_name[64]; + + get_udev_link_name(udev, link_name, sizeof(link_name)); + sysfs_remove_link(&hub->dev->kobj, link_name); + + mutex_lock(&hub->lock); + + list_for_each_entry(node, &hub->udev_list, list) { + if (node->udev == udev) { + list_del(&node->list); + kfree(node); + break; + } + } + + mutex_unlock(&hub->lock); +} + +static ssize_t always_powered_in_suspend_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + const struct onboard_hub *hub = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d\n", hub->always_powered_in_suspend); +} + +static ssize_t always_powered_in_suspend_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct onboard_hub *hub = dev_get_drvdata(dev); + bool val; + int ret; + + ret = kstrtobool(buf, &val); + if (ret < 0) + return ret; + + hub->always_powered_in_suspend = val; + + return count; +} +static DEVICE_ATTR_RW(always_powered_in_suspend); + +static struct attribute *onboard_hub_attrs[] = { + &dev_attr_always_powered_in_suspend.attr, + NULL, +}; +ATTRIBUTE_GROUPS(onboard_hub); + +static int onboard_hub_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct onboard_hub *hub; + int err; + + hub = devm_kzalloc(dev, sizeof(*hub), GFP_KERNEL); + if (!hub) + return -ENOMEM; + + hub->vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(hub->vdd)) + return PTR_ERR(hub->vdd); + + hub->dev = dev; + mutex_init(&hub->lock); + INIT_LIST_HEAD(&hub->udev_list); + + dev_set_drvdata(dev, hub); + + err = onboard_hub_power_on(hub); + if (err) + return err; + + /* + * The USB driver might have been detached from the USB devices by + * onboard_hub_remove(), make sure to re-attach it if needed. + */ + err = driver_attach(&onboard_hub_usbdev_driver.drvwrap.driver); + if (err) { + onboard_hub_power_off(hub); + return err; + } + + return 0; +} + +static int onboard_hub_remove(struct platform_device *pdev) +{ + struct onboard_hub *hub = dev_get_drvdata(&pdev->dev); + struct usbdev_node *node; + struct usb_device *udev; + + hub->going_away = true; + + mutex_lock(&hub->lock); + + /* unbind the USB devices to avoid dangling references to this device */ + while (!list_empty(&hub->udev_list)) { + node = list_first_entry(&hub->udev_list, struct usbdev_node, list); + udev = node->udev; + + /* + * Unbinding the driver will call onboard_hub_remove_usbdev(), + * which acquires hub->lock. We must release the lock first. + */ + get_device(&udev->dev); + mutex_unlock(&hub->lock); + device_release_driver(&udev->dev); + put_device(&udev->dev); + mutex_lock(&hub->lock); + } + + mutex_unlock(&hub->lock); + + return onboard_hub_power_off(hub); +} + +static const struct of_device_id onboard_hub_match[] = { + { .compatible = "usbbda,411" }, + { .compatible = "usbbda,5411" }, + { .compatible = "usbbda,414" }, + { .compatible = "usbbda,5414" }, + {} +}; +MODULE_DEVICE_TABLE(of, onboard_hub_match); + +static bool of_is_onboard_usb_hub(const struct device_node *np) +{ + return !!of_match_node(onboard_hub_match, np); +} + +static const struct dev_pm_ops __maybe_unused onboard_hub_pm_ops = { + SET_LATE_SYSTEM_SLEEP_PM_OPS(onboard_hub_suspend, onboard_hub_resume) +}; + +static struct platform_driver onboard_hub_driver = { + .probe = onboard_hub_probe, + .remove = onboard_hub_remove, + + .driver = { + .name = "onboard-usb-hub", + .of_match_table = onboard_hub_match, + .pm = pm_ptr(&onboard_hub_pm_ops), + .dev_groups = onboard_hub_groups, + }, +}; + +/************************** USB driver **************************/ + +#define VENDOR_ID_REALTEK 0x0bda + +/* + * Returns the onboard_hub platform device that is associated with the USB + * device passed as parameter. + */ +static struct onboard_hub *_find_onboard_hub(struct device *dev) +{ + struct platform_device *pdev; + struct device_node *np; + struct onboard_hub *hub; + + pdev = of_find_device_by_node(dev->of_node); + if (!pdev) { + np = of_parse_phandle(dev->of_node, "companion-hub", 0); + if (!np) { + dev_err(dev, "failed to find device node for companion hub\n"); + return ERR_PTR(-EINVAL); + } + + pdev = of_find_device_by_node(np); + of_node_put(np); + + if (!pdev) + return ERR_PTR(-ENODEV); + } + + hub = dev_get_drvdata(&pdev->dev); + put_device(&pdev->dev); + + /* + * The presence of drvdata ('hub') indicates that the platform driver + * finished probing. This handles the case where (conceivably) we could + * be running at the exact same time as the platform driver's probe. If + * we detect the race we request probe deferral and we'll come back and + * try again. + */ + if (!hub) + return ERR_PTR(-EPROBE_DEFER); + + return hub; +} + +static int onboard_hub_usbdev_probe(struct usb_device *udev) +{ + struct device *dev = &udev->dev; + struct onboard_hub *hub; + int err; + + /* ignore supported hubs without device tree node */ + if (!dev->of_node) + return -ENODEV; + + hub = _find_onboard_hub(dev); + if (IS_ERR(hub)) + return PTR_ERR(hub); + + dev_set_drvdata(dev, hub); + + err = onboard_hub_add_usbdev(hub, udev); + if (err) + return err; + + return 0; +} + +static void onboard_hub_usbdev_disconnect(struct usb_device *udev) +{ + struct onboard_hub *hub = dev_get_drvdata(&udev->dev); + + onboard_hub_remove_usbdev(hub, udev); +} + +static const struct usb_device_id onboard_hub_id_table[] = { + { USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */ + { USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */ + { USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */ + { USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */ + {} +}; +MODULE_DEVICE_TABLE(usb, onboard_hub_id_table); + +static struct usb_device_driver onboard_hub_usbdev_driver = { + .name = "onboard-usb-hub", + .probe = onboard_hub_usbdev_probe, + .disconnect = onboard_hub_usbdev_disconnect, + .generic_subclass = 1, + .supports_autosuspend = 1, + .id_table = onboard_hub_id_table, +}; + +/*** Helpers for creating/destroying platform devices for onboard hubs ***/ + +struct pdev_list_entry { + struct platform_device *pdev; + struct list_head node; +}; + +/** + * onboard_hub_create_pdevs -- create platform devices for onboard USB hubs + * @parent_hub : parent hub to scan for connected onboard hubs + * @pdev_list : list of onboard hub platform devices owned by the parent hub + * + * Creates a platform device for each supported onboard hub that is connected to + * the given parent hub. To keep track of the platform devices they are added to + * a list that is owned by the parent hub. + */ +void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list) +{ + int i; + struct device_node *np, *npc; + struct platform_device *pdev = NULL; + struct pdev_list_entry *pdle; + + INIT_LIST_HEAD(pdev_list); + + for (i = 1; i <= parent_hub->maxchild; i++) { + np = usb_of_get_device_node(parent_hub, i); + if (!np) + continue; + + if (!of_is_onboard_usb_hub(np)) + goto node_put; + + npc = of_parse_phandle(np, "companion-hub", 0); + if (npc) { + pdev = of_find_device_by_node(npc); + of_node_put(npc); + } + + if (pdev) { + /* the companion hub already has a platform device, nothing to do here */ + put_device(&pdev->dev); + goto node_put; + } + + pdev = of_platform_device_create(np, NULL, &parent_hub->dev); + if (!pdev) { + dev_err(&parent_hub->dev, + "failed to create platform device for onboard hub '%pOF'\n", np); + goto node_put; + } + + pdle = devm_kzalloc(&pdev->dev, sizeof(*pdle), GFP_KERNEL); + if (!pdle) { + of_platform_device_destroy(&pdev->dev, NULL); + goto node_put; + } + + pdle->pdev = pdev; + list_add(&pdle->node, pdev_list); + +node_put: + of_node_put(np); + } +} +EXPORT_SYMBOL_GPL(onboard_hub_create_pdevs); + +/** + * onboard_hub_destroy_pdevs -- free resources of onboard hub platform devices + * @pdev_list : list of onboard hub platform devices + * + * Destroys the platform devices in the given list and frees the memory associated + * with the list entry. + */ +void onboard_hub_destroy_pdevs(struct list_head *pdev_list) +{ + struct pdev_list_entry *pdle, *tmp; + + list_for_each_entry_safe(pdle, tmp, pdev_list, node) { + list_del(&pdle->node); + of_platform_device_destroy(&pdle->pdev->dev, NULL); + } +} +EXPORT_SYMBOL_GPL(onboard_hub_destroy_pdevs); + +/************************** Driver (de)registration **************************/ + +static int __init onboard_hub_init(void) +{ + int ret; + + ret = platform_driver_register(&onboard_hub_driver); + if (ret) + return ret; + + ret = usb_register_device_driver(&onboard_hub_usbdev_driver, THIS_MODULE); + if (ret) + platform_driver_unregister(&onboard_hub_driver); + + return ret; +} +module_init(onboard_hub_init); + +static void __exit onboard_hub_exit(void) +{ + usb_deregister_device_driver(&onboard_hub_usbdev_driver); + platform_driver_unregister(&onboard_hub_driver); +} +module_exit(onboard_hub_exit); + +MODULE_AUTHOR("Matthias Kaehlcke "); +MODULE_DESCRIPTION("Driver for discrete onboard USB hubs"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/usb/onboard_hub.h b/include/linux/usb/onboard_hub.h new file mode 100644 index 000000000000..d9373230556e --- /dev/null +++ b/include/linux/usb/onboard_hub.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __LINUX_USB_ONBOARD_HUB_H +#define __LINUX_USB_ONBOARD_HUB_H + +struct usb_device; +struct list_head; + +#if IS_ENABLED(CONFIG_USB_ONBOARD_HUB) +void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list); +void onboard_hub_destroy_pdevs(struct list_head *pdev_list); +#else +static inline void onboard_hub_create_pdevs(struct usb_device *parent_hub, + struct list_head *pdev_list) {} +static inline void onboard_hub_destroy_pdevs(struct list_head *pdev_list) {} +#endif + +#endif /* __LINUX_USB_ONBOARD_HUB_H */ From patchwork Thu Feb 17 18:42:54 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matthias Kaehlcke X-Patchwork-Id: 543681 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B23EFC433F5 for ; Thu, 17 Feb 2022 18:43:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S244551AbiBQSnb (ORCPT ); Thu, 17 Feb 2022 13:43:31 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:45842 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S244550AbiBQSn3 (ORCPT ); Thu, 17 Feb 2022 13:43:29 -0500 Received: from mail-pl1-x62a.google.com (mail-pl1-x62a.google.com [IPv6:2607:f8b0:4864:20::62a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9CFCD14008 for ; Thu, 17 Feb 2022 10:43:11 -0800 (PST) Received: by mail-pl1-x62a.google.com with SMTP id j4so5260035plj.8 for ; Thu, 17 Feb 2022 10:43:11 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=150I8tSeoQEdnBW/+p+7xnMkqFAoe9hccra7knV3Q/4=; b=IYb9C99Nd6cqeKKYhs2ozW0LnPOclIeM4t/tKWk6bkI+Equaz+baO4EDzHyi/JQU0P se6ly5U3jlSjwllXuSHZ3QZFzn+CziSet1m6jCRZmVohXCsYhCiAwX8T5gJM69XAyDGy zTmMIZ3amYHU83M6ELcTYQrYi9HJu9Fmmo0pQ= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=150I8tSeoQEdnBW/+p+7xnMkqFAoe9hccra7knV3Q/4=; b=jEwhFVfTxMxkuYasC6nfJC4JesZgaEBnF6JL1IvpUOolIolpyDSoS3M8BlyRbC2ZWi pbsIJR0vfi0QNRtm1P66Ga5BblLZEKoVL4PF/NeedldvZon5WLyz+GcIwabNXkJepZ5J A7w/tOD0srCad5B8noIeVDyByg5TvF6OIfehsUrjN2kfVCvRyUQlQyqCpVD0YKoXofQ1 9J/qyGE6abSYO+rwNA5Mw3BZc2aeEEgouyEfAhIADn3dsN0o1UWgpI4Bw2uEHo++9kVs 6pkHJLN82JUAOJMXoOUliajKUH8HwquJkkkuNF2OUuPDxphRKNWFj0syNi6LqxlhXH7q ZRdA== X-Gm-Message-State: AOAM531HQlYacnjARfLkoVGxvw33ic754FES9BodARpabd5Pk4Q09k0B 5ckrHTy1D05vJH2yt/N3VlYHWg== X-Google-Smtp-Source: ABdhPJxMRjgoWIhXnCig3kodTead2c1ZzrN0DvXCm90tES5J+jMe+RRD3wJbABP/1Kwa+4t6DsbNxA== X-Received: by 2002:a17:90a:7845:b0:1b9:159c:148e with SMTP id y5-20020a17090a784500b001b9159c148emr4338987pjl.136.1645123391193; Thu, 17 Feb 2022 10:43:11 -0800 (PST) Received: from localhost ([2620:15c:202:201:b42d:98cc:5dcc:5ef5]) by smtp.gmail.com with UTF8SMTPSA id l21sm317135pfu.120.2022.02.17.10.43.09 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Thu, 17 Feb 2022 10:43:10 -0800 (PST) From: Matthias Kaehlcke To: Greg Kroah-Hartman , Alan Stern , Rob Herring , Frank Rowand , Mathias Nyman , Felipe Balbi Cc: linux-usb@vger.kernel.org, Ravi Chandra Sadineni , Roger Quadros , linux-kernel@vger.kernel.org, Bastien Nocera , Douglas Anderson , Michal Simek , Stephen Boyd , devicetree@vger.kernel.org, Krzysztof Kozlowski , Peter Chen , Matthias Kaehlcke , Guo Zhengkui , Kishon Vijay Abraham I , Li Jun , Peter Chen , Thinh Nguyen Subject: [PATCH v21 3/3] usb: core: hcd: Create platform devices for onboard hubs in probe() Date: Thu, 17 Feb 2022 10:42:54 -0800 Message-Id: <20220217104219.v21.3.I7a3a7d9d2126c34079b1cab87aa0b2ec3030f9b7@changeid> X-Mailer: git-send-email 2.35.1.473.g83b2b277ed-goog In-Reply-To: <20220217184254.4141705-1-mka@chromium.org> References: <20220217184254.4141705-1-mka@chromium.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Call onboard_hub_create/destroy_pdevs() from usb_add/remove_hcd() for primary HCDs to create/destroy platform devices for onboard USB hubs that may be connected to the root hub of the controller. These functions are a NOP unless CONFIG_USB_ONBOARD_HUB=y/m. Also add a field to struct usb_hcd to keep track of the onboard hub platform devices that are owned by the HCD. Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Reviewed-by: Stephen Boyd --- Changes in v21: - none Changes in v20: - added 'Reviewed-by' tags from Doug and Stephen Changes in v19: - none Changes in v18: - none Changes in v17: - create the platform devices in the generic HCD code instead of the xhci_platform driver - updated subject and commit message to reflect the above change - dropped initialization of platform device list, which is now done in onboard_hub_create_pdevs() Changes in v16: - none Changes in v15: - none Changes in v14: - none Changes in v13: - added comment for 'depends on USB_ONBOARD_HUB || !USB_ONBOARD_HUB' construct Changes in v12: - none Changes in v11: - use onboard_hub_create/destroy_pdevs() to support multiple onboard hubs that are connected to the same root hub - moved field/list to keep track of platform devices from struct usb_hcd to struct xhci_hcd - updated commit message Changes in v10: - none Changes in v9: - added dependency on USB_ONBOARD_HUB (or !!USB_ONBOARD_HUB) to USB_XHCI_PLATFORM Changes in v8: - none Changes in v7: - none Changes in v6: - none Changes in v5: - patch added to the series drivers/usb/core/hcd.c | 6 ++++++ include/linux/usb/hcd.h | 1 + 2 files changed, 7 insertions(+) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index d9712c2602af..81785072fafb 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include "usb.h" @@ -2984,6 +2985,9 @@ int usb_add_hcd(struct usb_hcd *hcd, if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) usb_hcd_poll_rh_status(hcd); + if (usb_hcd_is_primary_hcd(hcd)) + onboard_hub_create_pdevs(hcd->self.root_hub, &hcd->onboard_hub_devs); + return retval; err_register_root_hub: @@ -3062,6 +3066,8 @@ void usb_remove_hcd(struct usb_hcd *hcd) if (usb_hcd_is_primary_hcd(hcd)) { if (hcd->irq > 0) free_irq(hcd->irq, hcd); + + onboard_hub_destroy_pdevs(&hcd->onboard_hub_devs); } usb_deregister_bus(&hcd->self); diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 548a028f2dab..4ebc91c09182 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -198,6 +198,7 @@ struct usb_hcd { struct usb_hcd *shared_hcd; struct usb_hcd *primary_hcd; + struct list_head onboard_hub_devs; #define HCD_BUFFER_POOLS 4 struct dma_pool *pool[HCD_BUFFER_POOLS];