From patchwork Fri Feb 18 11:00:59 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Satya Priya Kakitapalli \(Temp\)" X-Patchwork-Id: 543876 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id EF530C433FE for ; Fri, 18 Feb 2022 11:01:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234277AbiBRLB4 (ORCPT ); Fri, 18 Feb 2022 06:01:56 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:54722 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234289AbiBRLBz (ORCPT ); Fri, 18 Feb 2022 06:01:55 -0500 Received: from alexa-out-sd-02.qualcomm.com (alexa-out-sd-02.qualcomm.com [199.106.114.39]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 669CB12D09A; Fri, 18 Feb 2022 03:01:36 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1645182097; x=1676718097; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=xC0tnBauPfrhyHvmFyGrK+yrVEmvEbfDV8uXMcB0bCk=; b=NNFGcquHsNqbzcAy0ZnXGfQjFSlQ92a9/8wWXaqMQ2+bqYdc5Dda5ppq kp84KQ+oGSEX9xkz/txtWB1ZG2MtV0XHFXwbru2iP9mwqKDPorHS9+y3i /pnY6FE+g9AUCjFKcFx3F+2aRmlnD2LmhzvgGI2HzC+Jns4YVTgyh2AoQ o=; Received: from unknown (HELO ironmsg05-sd.qualcomm.com) ([10.53.140.145]) by alexa-out-sd-02.qualcomm.com with ESMTP; 18 Feb 2022 03:01:36 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg05-sd.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 18 Feb 2022 03:01:36 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Fri, 18 Feb 2022 03:01:35 -0800 Received: from c-skakit-linux.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Fri, 18 Feb 2022 03:01:31 -0800 From: Satya Priya To: Bjorn Andersson , Rob Herring CC: Lee Jones , Liam Girdwood , Mark Brown , Das Srinagesh , , , , , , , , Satya Priya Subject: [PATCH V7 1/5] dt-bindings: mfd: pm8008: Add pm8008 regulators Date: Fri, 18 Feb 2022 16:30:59 +0530 Message-ID: <1645182064-15843-2-git-send-email-quic_c_skakit@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1645182064-15843-1-git-send-email-quic_c_skakit@quicinc.com> References: <1645182064-15843-1-git-send-email-quic_c_skakit@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01a.na.qualcomm.com (10.52.223.231) To nalasex01a.na.qualcomm.com (10.47.209.196) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add regulators and their supply nodes. Add separate compatible "qcom,pm8008-regulators" to differentiate between pm8008 infra and pm8008 regulators mfd devices. Signed-off-by: Satya Priya --- Changes in V2: - As per Rob's comments changed "pm8008[a-z]?-regulator" to "^pm8008[a-z]?-regulators". Changes in V3: - Fixed bot errors. - As per stephen's comments, changed "^pm8008[a-z]?-regulators$" to "regulators". Changes in V4: - Changed compatible string to "qcom,pm8008-regulators" Changes in V5: - Remove compatible for regulators node. - Move supply nodes of the regulators to chip level. Changes in V6: - No changes. Changes in V7: - Removed the intermediate regulators node and added ldos directly under mfd node. .../devicetree/bindings/mfd/qcom,pm8008.yaml | 50 +++++++++++++++++++--- 1 file changed, 43 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml index ec3138c..6b3b53e 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -16,7 +16,9 @@ description: | properties: compatible: - const: qcom,pm8008 + enum: + - qcom,pm8008 + - qcom,pm8008-regulators reg: description: @@ -44,6 +46,21 @@ properties: "#size-cells": const: 0 + vdd_l1_l2-supply: + description: Input supply phandle of ldo1 and ldo2 regulators. + + vdd_l3_l4-supply: + description: Input supply phandle of ldo3 and ldo4 regulators. + + vdd_l5-supply: + description: Input supply phandle of ldo5 regulator. + + vdd_l6-supply: + description: Input supply phandle of ldo6 regulator. + + vdd_l7-supply: + description: Input supply phandle of ldo7 regulator. + patternProperties: "^gpio@[0-9a-f]+$": type: object @@ -85,13 +102,16 @@ patternProperties: additionalProperties: false + "^ldo[1-7]$": + type: object + $ref: "../regulator/regulator.yaml#" + description: PM8008 regulator peripherals of PM8008 regulator device + required: - compatible - reg - - interrupts - "#address-cells" - "#size-cells" - - "#interrupt-cells" additionalProperties: false @@ -102,13 +122,11 @@ examples: qupv3_se13_i2c { #address-cells = <1>; #size-cells = <0>; - pm8008i@8 { + pm8008_infra: pm8008@8 { compatible = "qcom,pm8008"; reg = <0x8>; #address-cells = <1>; #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <2>; interrupt-parent = <&tlmm>; interrupts = <32 IRQ_TYPE_EDGE_RISING>; @@ -123,6 +141,24 @@ examples: #interrupt-cells = <2>; }; }; - }; + pm8008_regulators: pm8008@9 { + compatible = "qcom,pm8008-regulators"; + reg = <0x9>; + #address-cells = <1>; + #size-cells = <0>; + + vdd_l1_l2-supply = <&vreg_s8b_1p2>; + vdd_l3_l4-supply = <&vreg_s1b_1p8>; + vdd_l5-supply = <&vreg_bob>; + vdd_l6-supply = <&vreg_bob>; + vdd_l7-supply = <&vreg_bob>; + + pm8008_l1: ldo1 { + regulator-name = "pm8008_l1"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + }; + }; + }; ... From patchwork Fri Feb 18 11:01:01 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Satya Priya Kakitapalli \(Temp\)" X-Patchwork-Id: 543875 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C7945C433FE for ; Fri, 18 Feb 2022 11:01:51 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234283AbiBRLCF (ORCPT ); Fri, 18 Feb 2022 06:02:05 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:55218 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234300AbiBRLCD (ORCPT ); Fri, 18 Feb 2022 06:02:03 -0500 Received: from alexa-out.qualcomm.com (alexa-out.qualcomm.com [129.46.98.28]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 610CE1FC42A; Fri, 18 Feb 2022 03:01:46 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1645182106; x=1676718106; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=fDnpjrjzeWKD4rX0+iVO3Vi2Qr3D3J1Zc6SjCjKu+Zg=; b=MKGdBHWDJcsRgnTZgAKAapUVcQTCUfr5nEzOsd2B4hjax6UlanTYRYVL QMpjLXlhshHeaeE2556ysMkJaOtJeWXbFyAJxmMqYWr29VpHVHOr28bC2 sv5zJ5VBxC3ORKOsNiVKn4Ty8zdEFUiHqjESoL/NQpMZ3+jLbF8mUt3k3 8=; Received: from ironmsg09-lv.qualcomm.com ([10.47.202.153]) by alexa-out.qualcomm.com with ESMTP; 18 Feb 2022 03:01:46 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg09-lv.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 18 Feb 2022 03:01:46 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Fri, 18 Feb 2022 03:01:45 -0800 Received: from c-skakit-linux.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Fri, 18 Feb 2022 03:01:40 -0800 From: Satya Priya To: Bjorn Andersson , Rob Herring CC: Lee Jones , Liam Girdwood , Mark Brown , Das Srinagesh , , , , , , , , Satya Priya Subject: [PATCH V7 3/5] regulator: Add a regulator driver for the PM8008 PMIC Date: Fri, 18 Feb 2022 16:31:01 +0530 Message-ID: <1645182064-15843-4-git-send-email-quic_c_skakit@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1645182064-15843-1-git-send-email-quic_c_skakit@quicinc.com> References: <1645182064-15843-1-git-send-email-quic_c_skakit@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01a.na.qualcomm.com (10.52.223.231) To nalasex01a.na.qualcomm.com (10.47.209.196) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Qualcomm Technologies, Inc. PM8008 is an I2C controlled PMIC containing 7 LDO regulators. Add a PM8008 regulator driver to support PMIC regulator management via the regulator framework. Signed-off-by: Satya Priya --- Changes in V2: As per Mark's comments - Using regmap helpers for regulator enable/disable and is_enabled APIs - Changed pr_err to dev_err wherever possible. - Removed init_voltage property as it is not used. - Removed if check for registering LDOs - Other minor changes. Changes in V3: As per Stephen's comments, - Removed unused includes - Removed PM8008_MAX_LDO macro. - Removed pm8008_read/write APIs, using regmap_bulk_read/write APIs - Using le16_to_cpu/cpu_to_le16 APIs in pm8008_regulator_get/set_voltage - Consolidated all probe related functions into single probe function. - Added of_parse_cb call back and removed regulator-name matching loop. - Fixed other minor nits. Changes in V4: - Removed unused members like rdev and of_node from pm8008_regulator struct. - Replaced set_voltage with set_voltage_sel - Removed init_data configuration as it is not needed. - Removed few other unused assignments from probe Changes in V5: - Removed Compatible string. - Changed the probe function accordingly to probe LDOs using mfd driver. - Added max headrooms for LDOs and removed the part reading min-dropout from DT. - Added base reg values in the regulator_data struct instead of reading it from DT. Changes in V6: - Using loop to probe the regulators instead of creating separate platform device for each regulator. - Removed the of_parse_cb API as we are not parsing any DT properties. Moved slewrate configuration to probe. - Fixed other nits. Changes in V7: - Removed unused Macros and headers. drivers/regulator/Kconfig | 9 ++ drivers/regulator/Makefile | 1 + drivers/regulator/qcom-pm8008-regulator.c | 205 ++++++++++++++++++++++++++++++ 3 files changed, 215 insertions(+) create mode 100644 drivers/regulator/qcom-pm8008-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 00559c2..067013b 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -925,6 +925,15 @@ config REGULATOR_PWM This driver supports PWM controlled voltage regulators. PWM duty cycle can increase or decrease the voltage. +config REGULATOR_QCOM_PM8008 + tristate "Qualcomm Technologies, Inc. PM8008 PMIC regulators" + depends on MFD_QCOM_PM8008 + help + Select this option to get support for the voltage regulators + of Qualcomm Technologies, Inc. PM8008 PMIC chip. PM8008 has 7 LDO + regulators. This driver provides support for basic operations like + set/get voltage and enable/disable. + config REGULATOR_QCOM_RPM tristate "Qualcomm RPM regulator driver" depends on MFD_QCOM_RPM diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 4b8794a..6462fd4 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_MTK_DVFSRC) += mtk-dvfsrc-regulator.o obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o +obj-$(CONFIG_REGULATOR_QCOM_PM8008) += qcom-pm8008-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o diff --git a/drivers/regulator/qcom-pm8008-regulator.c b/drivers/regulator/qcom-pm8008-regulator.c new file mode 100644 index 0000000..1c52864 --- /dev/null +++ b/drivers/regulator/qcom-pm8008-regulator.c @@ -0,0 +1,205 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define VSET_STEP_MV 8 +#define VSET_STEP_UV (VSET_STEP_MV * 1000) + +#define LDO_ENABLE_REG(base) ((base) + 0x46) +#define ENABLE_BIT BIT(7) + +#define LDO_VSET_LB_REG(base) ((base) + 0x40) + +#define LDO_STEPPER_CTL_REG(base) ((base) + 0x3b) +#define DEFAULT_VOLTAGE_STEPPER_RATE 38400 +#define STEP_RATE_MASK GENMASK(1, 0) + +struct regulator_data { + const char *name; + const char *supply_name; + u16 base; + int min_uv; + int max_uv; + int min_dropout_uv; + const struct linear_range *voltage_range; +}; + +struct pm8008_regulator { + struct device *dev; + struct regmap *regmap; + struct regulator_desc rdesc; + u16 base; + int step_rate; +}; + +static const struct linear_range nldo_ranges[] = { + REGULATOR_LINEAR_RANGE(528000, 0, 122, 8000), +}; + +static const struct linear_range pldo_ranges[] = { + REGULATOR_LINEAR_RANGE(1504000, 0, 237, 8000), +}; + +static const struct regulator_data reg_data[] = { + /* name parent base min_uv max_uv headroom_uv voltage_range */ + { "ldo1", "vdd_l1_l2", 0x4000, 528000, 1504000, 225000, nldo_ranges, }, + { "ldo2", "vdd_l1_l2", 0x4100, 528000, 1504000, 225000, nldo_ranges, }, + { "ldo3", "vdd_l3_l4", 0x4200, 1504000, 3400000, 300000, pldo_ranges, }, + { "ldo4", "vdd_l3_l4", 0x4300, 1504000, 3400000, 300000, pldo_ranges, }, + { "ldo5", "vdd_l5", 0x4400, 1504000, 3400000, 200000, pldo_ranges, }, + { "ldo6", "vdd_l6", 0x4500, 1504000, 3400000, 200000, pldo_ranges, }, + { "ldo7", "vdd_l7", 0x4600, 1504000, 3400000, 200000, pldo_ranges, }, +}; + +static int pm8008_regulator_get_voltage(struct regulator_dev *rdev) +{ + struct pm8008_regulator *pm8008_reg = rdev_get_drvdata(rdev); + __le16 mV; + int rc; + + rc = regmap_bulk_read(pm8008_reg->regmap, + LDO_VSET_LB_REG(pm8008_reg->base), (void *)&mV, 2); + if (rc < 0) { + dev_err(&rdev->dev, "failed to read regulator voltage rc=%d\n", rc); + return rc; + } + + return le16_to_cpu(mV) * 1000; +} + +static inline int pm8008_write_voltage(struct pm8008_regulator *pm8008_reg, + int mV) +{ + __le16 vset_raw; + + vset_raw = cpu_to_le16(mV); + + return regmap_bulk_write(pm8008_reg->regmap, + LDO_VSET_LB_REG(pm8008_reg->base), + (const void *)&vset_raw, sizeof(vset_raw)); +} + +static int pm8008_regulator_set_voltage_time(struct regulator_dev *rdev, + int old_uV, int new_uv) +{ + struct pm8008_regulator *pm8008_reg = rdev_get_drvdata(rdev); + + return DIV_ROUND_UP(abs(new_uv - old_uV), pm8008_reg->step_rate); +} + +static int pm8008_regulator_set_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + struct pm8008_regulator *pm8008_reg = rdev_get_drvdata(rdev); + int rc, mV; + + /* voltage control register is set with voltage in millivolts */ + mV = DIV_ROUND_UP(regulator_list_voltage_linear_range(rdev, selector), + 1000); + if (mV < 0) + return mV; + + rc = pm8008_write_voltage(pm8008_reg, mV); + if (rc < 0) + return rc; + + dev_dbg(&rdev->dev, "voltage set to %d\n", mV * 1000); + return 0; +} + +static const struct regulator_ops pm8008_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = pm8008_regulator_set_voltage, + .get_voltage = pm8008_regulator_get_voltage, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_time = pm8008_regulator_set_voltage_time, +}; + +static int pm8008_regulator_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regulator_dev *rdev; + struct pm8008_regulator *pm8008_reg; + struct regmap *regmap; + struct regulator_config reg_config = {}; + int rc, i; + unsigned int reg; + + regmap = dev_get_regmap(dev->parent, NULL); + if (!regmap) { + dev_err(dev, "parent regmap is missing\n"); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(reg_data); i++) { + pm8008_reg = devm_kzalloc(dev, sizeof(*pm8008_reg), GFP_KERNEL); + if (!pm8008_reg) + return -ENOMEM; + + pm8008_reg->regmap = regmap; + pm8008_reg->dev = dev; + pm8008_reg->base = reg_data[i].base; + + /* get slew rate */ + rc = regmap_bulk_read(pm8008_reg->regmap, + LDO_STEPPER_CTL_REG(pm8008_reg->base), ®, 1); + if (rc < 0) { + dev_err(dev, "failed to read step rate configuration rc=%d\n", rc); + return rc; + } + reg &= STEP_RATE_MASK; + pm8008_reg->step_rate = DEFAULT_VOLTAGE_STEPPER_RATE >> reg; + + pm8008_reg->rdesc.type = REGULATOR_VOLTAGE; + pm8008_reg->rdesc.ops = &pm8008_regulator_ops; + pm8008_reg->rdesc.name = reg_data[i].name; + pm8008_reg->rdesc.supply_name = reg_data[i].supply_name; + pm8008_reg->rdesc.of_match = reg_data[i].name; + pm8008_reg->rdesc.uV_step = VSET_STEP_UV; + pm8008_reg->rdesc.min_uV = reg_data[i].min_uv; + pm8008_reg->rdesc.n_voltages + = ((reg_data[i].max_uv - reg_data[i].min_uv) + / pm8008_reg->rdesc.uV_step) + 1; + pm8008_reg->rdesc.linear_ranges = reg_data[i].voltage_range; + pm8008_reg->rdesc.n_linear_ranges = 1; + pm8008_reg->rdesc.enable_reg = LDO_ENABLE_REG(pm8008_reg->base); + pm8008_reg->rdesc.enable_mask = ENABLE_BIT; + pm8008_reg->rdesc.min_dropout_uV = reg_data[i].min_dropout_uv; + + reg_config.dev = dev->parent; + reg_config.driver_data = pm8008_reg; + + rdev = devm_regulator_register(dev, &pm8008_reg->rdesc, ®_config); + if (IS_ERR(rdev)) { + rc = PTR_ERR(rdev); + dev_err(dev, "%s: failed to register regulator rc=%d\n", + reg_data[i].name, rc); + return rc; + } + } + + return 0; +} + +static struct platform_driver pm8008_regulator_driver = { + .driver = { + .name = "qcom,pm8008-regulators", + }, + .probe = pm8008_regulator_probe, +}; + +module_platform_driver(pm8008_regulator_driver); + +MODULE_DESCRIPTION("Qualcomm PM8008 PMIC Regulator Driver"); +MODULE_LICENSE("GPL"); From patchwork Fri Feb 18 11:01:03 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Satya Priya Kakitapalli \(Temp\)" X-Patchwork-Id: 543874 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 63C95C433FE for ; Fri, 18 Feb 2022 11:02:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234332AbiBRLCR (ORCPT ); Fri, 18 Feb 2022 06:02:17 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:55352 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234307AbiBRLCP (ORCPT ); Fri, 18 Feb 2022 06:02:15 -0500 Received: from alexa-out-sd-02.qualcomm.com (alexa-out-sd-02.qualcomm.com [199.106.114.39]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 46C5C23D3CB; Fri, 18 Feb 2022 03:01:56 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1645182118; x=1676718118; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=mq183hP0BaGYbuci31d1MFfN1q8alC0YOOwb4tVpnBg=; b=tVc1JFyKn48Rr4koWOZRWP93BsnEW5z2nNJahhwktIWabNm3Kun3OuKk JdpZh67YgrC0oxA/ieLNYXK9SXSwBYj9pNSlW0EEYEgSc5JUcq+tq828u Um1IR2Se6BzbgI5QlgMxtiwVJFi6BpTCREBiymOUb3J9skPRc6ulHGMct 4=; Received: from unknown (HELO ironmsg01-sd.qualcomm.com) ([10.53.140.141]) by alexa-out-sd-02.qualcomm.com with ESMTP; 18 Feb 2022 03:01:55 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg01-sd.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 18 Feb 2022 03:01:54 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Fri, 18 Feb 2022 03:01:54 -0800 Received: from c-skakit-linux.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Fri, 18 Feb 2022 03:01:50 -0800 From: Satya Priya To: Bjorn Andersson , Rob Herring CC: Lee Jones , Liam Girdwood , Mark Brown , Das Srinagesh , , , , , , , , Satya Priya Subject: [PATCH V7 5/5] arm64: dts: qcom: sc7280: Add pm8008 support for sc7280-idp Date: Fri, 18 Feb 2022 16:31:03 +0530 Message-ID: <1645182064-15843-6-git-send-email-quic_c_skakit@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1645182064-15843-1-git-send-email-quic_c_skakit@quicinc.com> References: <1645182064-15843-1-git-send-email-quic_c_skakit@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01a.na.qualcomm.com (10.52.223.231) To nalasex01a.na.qualcomm.com (10.47.209.196) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add pm8008_infra and pm8008_regulators support for sc7280 idp. Signed-off-by: Satya Priya --- Changes in V2: - As per Stephen's comments, replaced '_' with '-' for node names. Changes in V3: - Changed the regulator node names as l1, l2 etc - Changed "pm8008-regulators" to "regulators" - Changed "qcom,min-dropout-voltage" to "regulator-min-dropout-voltage-microvolt" Changes in V4: - Moved all common stuff to pm8008.dtsi and added board specific configurations here. Changes in V5: - Changed the node names as per pm8008.dtsi - Moved supply nodes to chip level (mfd node). - Removed the regulator-mindropout property. Changes in V6: - No changes. Changes in V7: - No Changes. arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 66 ++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index ecbf2b8..371ad19 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -263,6 +263,62 @@ }; }; +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + #include "pm8008.dtsi" +}; + +&pm8008_infra { + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_active>; +}; + +&pm8008_regulators { + vdd_l1_l2-supply = <&vreg_s8b_1p2>; + vdd_l3_l4-supply = <&vreg_s1b_1p8>; + vdd_l5-supply = <&vreg_bob>; + vdd_l6-supply = <&vreg_bob>; + vdd_l7-supply = <&vreg_bob>; +}; + +&pm8008_l1 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; +}; + +&pm8008_l2 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1250000>; +}; + +&pm8008_l3 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3000000>; +}; + +&pm8008_l4 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1600000>; +}; + +&pm8008_l5 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3000000>; +}; + +&pm8008_l6 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3000000>; +}; + +&pm8008_l7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; +}; + &qfprom { vcc-supply = <&vreg_l1c_1p8>; }; @@ -375,6 +431,16 @@ drive-strength = <2>; }; +&pm8350c_gpios { + pm8008_active: pm8008_active { + pins = "gpio4"; + function = "normal"; + bias-disable; + output-high; + power-source = <0>; + }; +}; + &qspi_cs0 { bias-disable; };