From patchwork Sat Mar 5 02:12:39 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 548591 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C74F4C433F5 for ; Sat, 5 Mar 2022 02:13:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230438AbiCECNx (ORCPT ); Fri, 4 Mar 2022 21:13:53 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51630 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230428AbiCECNw (ORCPT ); Fri, 4 Mar 2022 21:13:52 -0500 Received: from mail-wm1-x332.google.com (mail-wm1-x332.google.com [IPv6:2a00:1450:4864:20::332]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id AE8D21C4B20 for ; Fri, 4 Mar 2022 18:13:01 -0800 (PST) Received: by mail-wm1-x332.google.com with SMTP id r187-20020a1c2bc4000000b003810e6b192aso6088223wmr.1 for ; Fri, 04 Mar 2022 18:13:01 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=46n4LaD4ZyMBoEv7QyqZkVx2QkFYWM4XtM2ZRYBTQAc=; b=YNhT1rC43mmkRlwydAFFepdxSERVaNkxX87fow+by9EHPb83YSXCR/B9MISkmRegNX ClIw8JaiErScHwWqF7KhMkyxhAhOZmf6taSF+Fad2xapIQazQbgTBJzD/W8Y9n3bDLlG H54exVT7wrijQqO2jmgZvwlTXSJckssLdc1kpjX5hKjAayRi/3uRa6+KW42M3JwW2Ug3 704Ji1VslyXQZn4M72CllKZagzaFuezvkiUHaH/vFA/smsXQUUA2+SHG/s5ZkszCTsEe K9AmwgvxAJPmkl/SFLXeIY934IkWeySjIaHYY8SqZKNZvCXAP4p5smYWDgeuf39YvY3x 4zVQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=46n4LaD4ZyMBoEv7QyqZkVx2QkFYWM4XtM2ZRYBTQAc=; b=FOELAmpLuJSvXOO5h5ySWDuAXdFqc4W99+9khf2CiqjlHVFd3J/mJcdgGVxvIsgu8i 2Ci2nqIVOwcgW+KHNZp6itpAdabVAiVEKH7cvKxd+JXOFuijwBuiL0Nr5q23qH6WH1yw z2GYVPfSfpBqGCn3BrGSSWoQ2TeQC1O8/6af/+feb33SaiA/pMr8hF2wev1x/mEtTZoB /W3SiRyrKEomxKCjX1hPO7O6JhwjGnf6+D0zi52rIm7vseNzoYEQFeCDg+cKK9hyy2LK GY6TvAiOecaGJYYN+4PI9jdzgJ1WppbJTgUqM7MoJ/ShKd5jKum3gGA24pNcFe0vvpjT HEcQ== X-Gm-Message-State: AOAM5308oE4KlGM4Dv42J8wz3mHVIUbPuEEZRpHsnxR7Kgo/oJU9Np43 YOKZlz06hhpR6cNnb3ZW8MqZOw== X-Google-Smtp-Source: ABdhPJwYilD4Xt/kURetj4ZljWfKmJHZoL78irG+7JI3sgQEgbsd84fIhQ0QI9x428rsywEa4KrtpA== X-Received: by 2002:a7b:c001:0:b0:381:1afd:5caa with SMTP id c1-20020a7bc001000000b003811afd5caamr832702wmb.35.1646446380141; Fri, 04 Mar 2022 18:13:00 -0800 (PST) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id k10-20020adfe3ca000000b001f0329ba94csm7932589wrm.18.2022.03.04.18.12.59 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 04 Mar 2022 18:12:59 -0800 (PST) From: Caleb Connolly To: caleb.connolly@linaro.org, Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Andy Gross , Bjorn Andersson , Lee Jones , Stephen Boyd , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: sumit.semwal@linaro.org, amit.pundir@linaro.org, john.stultz@linaro.org Subject: [PATCH v10 1/9] spmi: add a helper to look up an SPMI device from a device node Date: Sat, 5 Mar 2022 02:12:39 +0000 Message-Id: <20220305021247.1020122-2-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220305021247.1020122-1-caleb.connolly@linaro.org> References: <20220305021247.1020122-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org The helper function spmi_device_from_of() takes a device node and returns the SPMI device associated with it. This is like of_find_device_by_node but for SPMI devices. Signed-off-by: Caleb Connolly --- drivers/spmi/spmi.c | 17 +++++++++++++++++ include/linux/spmi.h | 2 ++ 2 files changed, 19 insertions(+) diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c index b37ead9e2fad..de550b777451 100644 --- a/drivers/spmi/spmi.c +++ b/drivers/spmi/spmi.c @@ -386,6 +386,23 @@ static struct bus_type spmi_bus_type = { .uevent = spmi_drv_uevent, }; +/** + * spmi_device_from_of() - get the associated SPMI device from a device node + * + * @np: device node + * + * Returns the struct spmi_device associated with a device node or NULL. + */ +inline struct spmi_device *spmi_device_from_of(struct device_node *np) +{ + struct device *dev = bus_find_device_by_of_node(&spmi_bus_type, np); + + if (dev) + return to_spmi_device(dev); + return NULL; +} +EXPORT_SYMBOL_GPL(spmi_device_from_of); + /** * spmi_controller_alloc() - Allocate a new SPMI device * @ctrl: associated controller diff --git a/include/linux/spmi.h b/include/linux/spmi.h index 729bcbf9f5ad..6ee476bc1cd6 100644 --- a/include/linux/spmi.h +++ b/include/linux/spmi.h @@ -7,6 +7,7 @@ #include #include #include +#include /* Maximum slave identifier */ #define SPMI_MAX_SLAVE_ID 16 @@ -164,6 +165,7 @@ static inline void spmi_driver_unregister(struct spmi_driver *sdrv) module_driver(__spmi_driver, spmi_driver_register, \ spmi_driver_unregister) +inline struct spmi_device *spmi_device_from_of(struct device_node *np); int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf); int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf, size_t len); From patchwork Sat Mar 5 02:12:40 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 549398 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id EE137C433FE for ; Sat, 5 Mar 2022 02:13:07 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230120AbiCECNy (ORCPT ); Fri, 4 Mar 2022 21:13:54 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51678 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230437AbiCECNx (ORCPT ); Fri, 4 Mar 2022 21:13:53 -0500 Received: from mail-wm1-x333.google.com (mail-wm1-x333.google.com [IPv6:2a00:1450:4864:20::333]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D5B6D1C60E8 for ; Fri, 4 Mar 2022 18:13:02 -0800 (PST) Received: by mail-wm1-x333.google.com with SMTP id 19so5734721wmy.3 for ; Fri, 04 Mar 2022 18:13:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=RbxAM1v3GmwaEO1N0vOVZLDBhYmXogqHfxK6WOYehic=; b=Qy/OZmmAEE0HHHBkygoSifsyohvtik+VKI3HOu5eSAq3cz2oU7VSb36tf6QaTK4GvG lXAMLYoY83Dxw2aYXlqnKbjKLz7/nC3uVD9BR2G4smb/iuFHSDV1jsB78C4OrYP0lT3y 9etwtZZj4a2iDDrHkrpQZIZTQ6Ie2tWr2XbqQAKVmcGF7TF/EpKXss6i2CxskcbrRgS5 Z+QU5EUV2FYcHMKD0a+tb+xaN9PGoc6LX3Br/489eNBISqS/OyO2tLBnU2ySCWamiRCn Kr9fVnH79UH0fMY7+aLXVhsOfChf4DIXjdYOD+zIlHzBtenae0G2P4nJcOX22hunL4xx ky+Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=RbxAM1v3GmwaEO1N0vOVZLDBhYmXogqHfxK6WOYehic=; b=kQXFOcg9Z9PkgiE0pAsHpvnrHv9/GygfHLBNLeWzYP4vw7bC1NRClZUXXM3CubqYYZ eeIgG7cnEqDdgcIzFHsjEynEynDS+o8TSjliftBEM5XLwKegOjzdq//5Ybdg9faVI/H6 KsVj5KsBFG2ttHSDvoOv9BUD7XYVbRmz/4OEu7BMeW4RBIW82Ry2v75euoFO/O8s5GdO i4MmdUgiytKRYDNmq7UGoncdo1t6esYjqAW3pe93HjYLs1/o1zyBkEbP0pGyk/9aHTzK 0hbvQpboEN6Sq/YrRX0nzM7Q+wkneE1C32I6CUVOmt4V+fTVN+qIrZJwQBqd0iwvYVqG 0U6g== X-Gm-Message-State: AOAM531D7D5jEJYgCXyRdQ55A2rqMzHW/7s3mhUxS8+bh5rqHCH7BLeS aIK11o7LIwPzJ5Pi+qQoxwEo0Q== X-Google-Smtp-Source: ABdhPJyiNJ+dszb2oSX4MORwSJFALEf8yDdlTV2ZN1j9/uzzPK+SAInRNdMcg4n8MFx55xYEZm+mpA== X-Received: by 2002:a1c:7303:0:b0:37c:9270:2ff4 with SMTP id d3-20020a1c7303000000b0037c92702ff4mr829754wmb.99.1646446381318; Fri, 04 Mar 2022 18:13:01 -0800 (PST) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id k10-20020adfe3ca000000b001f0329ba94csm7932589wrm.18.2022.03.04.18.13.00 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 04 Mar 2022 18:13:00 -0800 (PST) From: Caleb Connolly To: caleb.connolly@linaro.org, Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Andy Gross , Bjorn Andersson , Lee Jones , Stephen Boyd , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: sumit.semwal@linaro.org, amit.pundir@linaro.org, john.stultz@linaro.org Subject: [PATCH v10 2/9] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients Date: Sat, 5 Mar 2022 02:12:40 +0000 Message-Id: <20220305021247.1020122-3-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220305021247.1020122-1-caleb.connolly@linaro.org> References: <20220305021247.1020122-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Some PMIC functions such as the RRADC need to be aware of the PMIC chip revision information to implement errata or otherwise adjust behaviour, export the PMIC information to enable this. This is specifically required to enable the RRADC to adjust coefficients based on which chip fab the PMIC was produced in, this can vary per unique device and therefore has to be read at runtime. Signed-off-by: Caleb Connolly Reported-by: kernel test robot --- drivers/mfd/qcom-spmi-pmic.c | 268 ++++++++++++++++++++---------- include/soc/qcom/qcom-spmi-pmic.h | 60 +++++++ 2 files changed, 238 insertions(+), 90 deletions(-) create mode 100644 include/soc/qcom/qcom-spmi-pmic.h diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c index 1cacc00aa6c9..bfe1304aee1b 100644 --- a/drivers/mfd/qcom-spmi-pmic.c +++ b/drivers/mfd/qcom-spmi-pmic.c @@ -3,11 +3,16 @@ * Copyright (c) 2014, The Linux Foundation. All rights reserved. */ +#include +#include +#include #include #include #include +#include #include #include +#include #define PMIC_REV2 0x101 #define PMIC_REV3 0x102 @@ -17,106 +22,158 @@ #define PMIC_TYPE_VALUE 0x51 -#define COMMON_SUBTYPE 0x00 -#define PM8941_SUBTYPE 0x01 -#define PM8841_SUBTYPE 0x02 -#define PM8019_SUBTYPE 0x03 -#define PM8226_SUBTYPE 0x04 -#define PM8110_SUBTYPE 0x05 -#define PMA8084_SUBTYPE 0x06 -#define PMI8962_SUBTYPE 0x07 -#define PMD9635_SUBTYPE 0x08 -#define PM8994_SUBTYPE 0x09 -#define PMI8994_SUBTYPE 0x0a -#define PM8916_SUBTYPE 0x0b -#define PM8004_SUBTYPE 0x0c -#define PM8909_SUBTYPE 0x0d -#define PM8028_SUBTYPE 0x0e -#define PM8901_SUBTYPE 0x0f -#define PM8950_SUBTYPE 0x10 -#define PMI8950_SUBTYPE 0x11 -#define PM8998_SUBTYPE 0x14 -#define PMI8998_SUBTYPE 0x15 -#define PM8005_SUBTYPE 0x18 -#define PM660L_SUBTYPE 0x1A -#define PM660_SUBTYPE 0x1B -#define PM8150_SUBTYPE 0x1E -#define PM8150L_SUBTYPE 0x1f -#define PM8150B_SUBTYPE 0x20 -#define PMK8002_SUBTYPE 0x21 -#define PM8009_SUBTYPE 0x24 -#define PM8150C_SUBTYPE 0x26 -#define SMB2351_SUBTYPE 0x29 +struct qcom_spmi_dev { + int num_usids; + struct qcom_spmi_pmic pmic; +}; + +#define N_USIDS(n) ((void *)n) static const struct of_device_id pmic_spmi_id_table[] = { - { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, - { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, - { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, - { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, - { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE }, - { .compatible = "qcom,pm8028", .data = (void *)PM8028_SUBTYPE }, - { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE }, - { .compatible = "qcom,pm8150", .data = (void *)PM8150_SUBTYPE }, - { .compatible = "qcom,pm8150b", .data = (void *)PM8150B_SUBTYPE }, - { .compatible = "qcom,pm8150c", .data = (void *)PM8150C_SUBTYPE }, - { .compatible = "qcom,pm8150l", .data = (void *)PM8150L_SUBTYPE }, - { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, - { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, - { .compatible = "qcom,pm8901", .data = (void *)PM8901_SUBTYPE }, - { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE }, - { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, - { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, - { .compatible = "qcom,pm8950", .data = (void *)PM8950_SUBTYPE }, - { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE }, - { .compatible = "qcom,pm8998", .data = (void *)PM8998_SUBTYPE }, - { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE }, - { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE }, - { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE }, - { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, - { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, - { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE }, - { .compatible = "qcom,pmk8002", .data = (void *)PMK8002_SUBTYPE }, - { .compatible = "qcom,smb2351", .data = (void *)SMB2351_SUBTYPE }, - { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, + { .compatible = "qcom,pm660", .data = N_USIDS(2) }, + { .compatible = "qcom,pm660l", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8004", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8005", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8019", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8028", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8110", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8150", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8150b", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8150c", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8150l", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8226", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8841", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8901", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8909", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8916", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8941", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8950", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8994", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8998", .data = N_USIDS(2) }, + { .compatible = "qcom,pma8084", .data = N_USIDS(2) }, + { .compatible = "qcom,pmd9635", .data = N_USIDS(2) }, + { .compatible = "qcom,pmi8950", .data = N_USIDS(2) }, + { .compatible = "qcom,pmi8962", .data = N_USIDS(2) }, + { .compatible = "qcom,pmi8994", .data = N_USIDS(2) }, + { .compatible = "qcom,pmi8998", .data = N_USIDS(2) }, + { .compatible = "qcom,pmk8002", .data = N_USIDS(2) }, + { .compatible = "qcom,smb2351", .data = N_USIDS(2) }, + { .compatible = "qcom,spmi-pmic", .data = N_USIDS(1) }, { } }; -static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) +#undef N_USIDS + +/* + * A PMIC can be represented by multiple SPMI devices, but + * only the base PMIC device will contain a reference to + * the revision information. + * + * This function takes a pointer to a function device and + * returns a pointer to the base PMIC device. + * + * This only supports PMICs with 1 or 2 USIDs. + */ +static struct spmi_device *qcom_pmic_get_base_usid(struct device *dev) { - unsigned int rev2, minor, major, type, subtype; - const char *name = "unknown"; - int ret, i; + struct spmi_device *sdev; + struct qcom_spmi_dev *ctx; + struct device_node *spmi_bus; + struct device_node *other_usid = NULL; + int function_parent_usid, ret; + u32 pmic_addr; - ret = regmap_read(map, PMIC_TYPE, &type); - if (ret < 0) - return; + if (!of_match_device(pmic_spmi_id_table, dev)) + return ERR_PTR(-EINVAL); + + sdev = to_spmi_device(dev); + ctx = spmi_device_get_drvdata(sdev); + + dev_info(dev, "CA: num_usids=%d, subtype=0x%x\n", ctx->num_usids, + ctx->pmic.subtype); + + /* + * Quick return if the function device is already in the base + * USID. This will always be hit for PMICs with only 1 USID. + */ + if (sdev->usid % ctx->num_usids == 0) + return sdev; + + function_parent_usid = sdev->usid; + dev_info(dev, "CA: function_parent_usid=%d\n", function_parent_usid); + + /* + * Walk through the list of PMICs until we find the sibling USID. + * The goal is to find the first USID which is less than the + * number of USIDs in the PMIC away, e.g. for a PMIC with 2 USIDs + * where the function device is under USID 3, we want to find the + * device for USID 2. + */ + spmi_bus = of_get_parent(sdev->dev.of_node); + do { + other_usid = of_get_next_child(spmi_bus, other_usid); + ret = of_property_read_u32_index(other_usid, "reg", 0, &pmic_addr); + dev_info(dev, "CA: other_usid=%s, pmic_addr=0x%x, ret=%d\n", + other_usid->name, pmic_addr, ret); + if (ret) + return ERR_PTR(ret); + sdev = spmi_device_from_of(other_usid); + if (sdev == NULL) { + dev_info(dev, "CA: sdev null"); + /* + * If the base USID for this PMIC hasn't probed yet + * but the secondary USID has, then we need to defer + * the function driver so that it will attempt to + * probe again when the base USID is ready. + */ + if (pmic_addr == function_parent_usid - (ctx->num_usids - 1)) + return ERR_PTR(-EPROBE_DEFER); + + continue; + } + + if (pmic_addr == function_parent_usid - (ctx->num_usids - 1)) + return sdev; + } while (other_usid->sibling); + + return ERR_PTR(-ENODATA); +} - if (type != PMIC_TYPE_VALUE) - return; +static inline void pmic_print_info(struct device *dev, struct qcom_spmi_pmic *pmic) +{ + dev_dbg(dev, "%x: %s v%d.%d\n", + pmic->subtype, pmic->name, pmic->major, pmic->minor); +} + +static int pmic_spmi_load_revid(struct regmap *map, struct device *dev, + struct qcom_spmi_pmic *pmic) +{ + int ret; - ret = regmap_read(map, PMIC_SUBTYPE, &subtype); + ret = regmap_read(map, PMIC_TYPE, &pmic->type); if (ret < 0) - return; + return ret; - for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) { - if (subtype == (unsigned long)pmic_spmi_id_table[i].data) - break; - } + if (pmic->type != PMIC_TYPE_VALUE) + return ret; + + ret = regmap_read(map, PMIC_SUBTYPE, &pmic->subtype); + if (ret < 0) + return ret; - if (i != ARRAY_SIZE(pmic_spmi_id_table)) - name = pmic_spmi_id_table[i].compatible; + pmic->name = of_match_device(pmic_spmi_id_table, dev)->compatible; - ret = regmap_read(map, PMIC_REV2, &rev2); + ret = regmap_read(map, PMIC_REV2, &pmic->rev2); if (ret < 0) - return; + return ret; - ret = regmap_read(map, PMIC_REV3, &minor); + ret = regmap_read(map, PMIC_REV3, &pmic->minor); if (ret < 0) - return; + return ret; - ret = regmap_read(map, PMIC_REV4, &major); + ret = regmap_read(map, PMIC_REV4, &pmic->major); if (ret < 0) - return; + return ret; /* * In early versions of PM8941 and PM8226, the major revision number @@ -124,16 +181,35 @@ static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) * Increment the major revision number here if the chip is an early * version of PM8941 or PM8226. */ - if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) && - major < 0x02) - major++; + if ((pmic->subtype == PM8941_SUBTYPE || pmic->subtype == PM8226_SUBTYPE) && + pmic->major < 0x02) + pmic->major++; + + if (pmic->subtype == PM8110_SUBTYPE) + pmic->minor = pmic->rev2; - if (subtype == PM8110_SUBTYPE) - minor = rev2; + pmic_print_info(dev, pmic); - dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor); + return 0; } +/** + * qcom_pmic_get() - Get a pointer to the base PMIC device + * + * @dev: the pmic function device + * @return: the struct qcom_spmi_pmic* pointer associated with the function device + */ +inline const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev) +{ + struct spmi_device *sdev = qcom_pmic_get_base_usid(dev->parent); + + if (IS_ERR(sdev)) + return ERR_CAST(sdev); + + return &((struct qcom_spmi_dev *)spmi_device_get_drvdata(sdev))->pmic; +} +EXPORT_SYMBOL(qcom_pmic_get); + static const struct regmap_config spmi_regmap_config = { .reg_bits = 16, .val_bits = 8, @@ -144,14 +220,26 @@ static const struct regmap_config spmi_regmap_config = { static int pmic_spmi_probe(struct spmi_device *sdev) { struct regmap *regmap; + struct qcom_spmi_dev *ctx; + int ret; regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config); if (IS_ERR(regmap)) return PTR_ERR(regmap); + ctx = devm_kzalloc(&sdev->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->num_usids = (long)of_device_get_match_data(&sdev->dev); + /* Only the first slave id for a PMIC contains this information */ - if (sdev->usid % 2 == 0) - pmic_spmi_show_revid(regmap, &sdev->dev); + if (sdev->usid % ctx->num_usids == 0) { + ret = pmic_spmi_load_revid(regmap, &sdev->dev, &ctx->pmic); + if (ret < 0) + return ret; + } + spmi_device_set_drvdata(sdev, ctx); return devm_of_platform_populate(&sdev->dev); } diff --git a/include/soc/qcom/qcom-spmi-pmic.h b/include/soc/qcom/qcom-spmi-pmic.h new file mode 100644 index 000000000000..5400e6509fe8 --- /dev/null +++ b/include/soc/qcom/qcom-spmi-pmic.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (c) 2021 Linaro. All rights reserved. + * Copyright (c) 2021 Caleb Connolly + */ + +#ifndef __QCOM_SPMI_PMIC_H__ +#define __QCOM_SPMI_PMIC_H__ + +#define COMMON_SUBTYPE 0x00 +#define PM8941_SUBTYPE 0x01 +#define PM8841_SUBTYPE 0x02 +#define PM8019_SUBTYPE 0x03 +#define PM8226_SUBTYPE 0x04 +#define PM8110_SUBTYPE 0x05 +#define PMA8084_SUBTYPE 0x06 +#define PMI8962_SUBTYPE 0x07 +#define PMD9635_SUBTYPE 0x08 +#define PM8994_SUBTYPE 0x09 +#define PMI8994_SUBTYPE 0x0a +#define PM8916_SUBTYPE 0x0b +#define PM8004_SUBTYPE 0x0c +#define PM8909_SUBTYPE 0x0d +#define PM8028_SUBTYPE 0x0e +#define PM8901_SUBTYPE 0x0f +#define PM8950_SUBTYPE 0x10 +#define PMI8950_SUBTYPE 0x11 +#define PM8998_SUBTYPE 0x14 +#define PMI8998_SUBTYPE 0x15 +#define PM8005_SUBTYPE 0x18 +#define PM660L_SUBTYPE 0x1A +#define PM660_SUBTYPE 0x1B +#define PM8150_SUBTYPE 0x1E +#define PM8150L_SUBTYPE 0x1f +#define PM8150B_SUBTYPE 0x20 +#define PMK8002_SUBTYPE 0x21 +#define PM8009_SUBTYPE 0x24 +#define PM8150C_SUBTYPE 0x26 +#define SMB2351_SUBTYPE 0x29 + +#define PMI8998_FAB_ID_SMIC 0x11 +#define PMI8998_FAB_ID_GF 0x30 + +#define PM660_FAB_ID_GF 0x0 +#define PM660_FAB_ID_TSMC 0x2 +#define PM660_FAB_ID_MX 0x3 + +struct qcom_spmi_pmic { + unsigned int type; + unsigned int subtype; + unsigned int major; + unsigned int minor; + unsigned int rev2; + const char *name; +}; + +struct device; + +inline const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev); + +#endif /* __QCOM_SPMI_PMIC_H__ */ From patchwork Sat Mar 5 02:12:41 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 549399 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 08337C4167D for ; Sat, 5 Mar 2022 02:13:08 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230441AbiCECNy (ORCPT ); Fri, 4 Mar 2022 21:13:54 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51642 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230432AbiCECNw (ORCPT ); Fri, 4 Mar 2022 21:13:52 -0500 Received: from mail-wm1-x335.google.com (mail-wm1-x335.google.com [IPv6:2a00:1450:4864:20::335]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DF4281C666B for ; Fri, 4 Mar 2022 18:13:03 -0800 (PST) Received: by mail-wm1-x335.google.com with SMTP id l1-20020a05600c4f0100b00389645443d2so3226376wmq.2 for ; Fri, 04 Mar 2022 18:13:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=78gNKgWiy0CQ87WA98rgoolaf4MxcOEltw1vanlXH7U=; b=BA/q/6fys7EToWgwF/bpkTpH2lrtlXFfPCra54IlyzgnOr0VuoIQMUvCwfofUE7Vrp PbT+oz782RICq6oN6d37nr3ybc0TTBPDKun3P4yAwXOj+HPRH3EUYqe7J/Ghl9lk4bgH wXFH+5fUBYZ9HaBR7jgBaTiIJ3goM7uZjX5G6XIZUonvOsCyBnpDmx23kWPOz3HVcKIw 0Fi4TgO8iMhDqQJqGwXLmEdByuzX9yXNu6rDYxlKEMFC4TBha1x835Bmq7JEgSl3g/O2 u+eb6ERDGOHv/QjZTPjdtUQqZyLL/KeB/D1sygbBGIeNIR5L0qyjNlJ9ZBIXA5ZP7uNS Dw4A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=78gNKgWiy0CQ87WA98rgoolaf4MxcOEltw1vanlXH7U=; b=2DrO+IyAjAtVc0iwoDF5EIqZWRowlH9oS3Kay/eiAEx3NRGOBRQCR/v5UoLVwFlL1c fBulFtPlH0ZmZ4MlAvVUiROrXLMbFP1pO4VAEkJ+7legWZOY25nwaWlrfGP/GMkTJQPh niUQEO/B6qUggDg8ijEpAgnPcFi2O4MOoOk7xNqLpzMa8Ehc10xuKqt6MEHTShbjLZI1 TlYkc1eGST/LKWN6GIxPzk2szq4jZX1IuFUw96EO5SuP8ZqfNuV2+AGcpZCna170fKOX cNnLFyRKAeVEybZOl+UTNd79TW3K738QXwMoazARIpXfCfOWxqmOok8ozDafuiJR/uLQ WZJA== X-Gm-Message-State: AOAM530Z0evTagOiB+BMoBC7szE/RoL55BqJGiAvEUXxAP1vip/XI5f+ O19VtaMqol8Gpue5ymKmL9izrw== X-Google-Smtp-Source: ABdhPJy8r7VUi/Xtr4LXeqaeRl6QgsyIV84roxu1OPO7b+ZUmR4ZnYuEszPF5TkxAyfJXc824lA7IQ== X-Received: by 2002:a7b:c5d6:0:b0:381:4127:84d3 with SMTP id n22-20020a7bc5d6000000b00381412784d3mr9935874wmk.24.1646446382419; Fri, 04 Mar 2022 18:13:02 -0800 (PST) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id k10-20020adfe3ca000000b001f0329ba94csm7932589wrm.18.2022.03.04.18.13.01 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 04 Mar 2022 18:13:02 -0800 (PST) From: Caleb Connolly To: caleb.connolly@linaro.org, Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Andy Gross , Bjorn Andersson , Lee Jones , Stephen Boyd , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: sumit.semwal@linaro.org, amit.pundir@linaro.org, john.stultz@linaro.org Subject: [PATCH v10 3/9] mfd: qcom-spmi-pmic: read fab id on supported PMICs Date: Sat, 5 Mar 2022 02:12:41 +0000 Message-Id: <20220305021247.1020122-4-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220305021247.1020122-1-caleb.connolly@linaro.org> References: <20220305021247.1020122-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org The PMI8998 and PM660 expose the fab_id, this is needed by drivers like the RRADC to calibrate ADC values. Signed-off-by: Caleb Connolly --- drivers/mfd/qcom-spmi-pmic.c | 7 +++++++ include/soc/qcom/qcom-spmi-pmic.h | 1 + 2 files changed, 8 insertions(+) diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c index bfe1304aee1b..b12a07da6183 100644 --- a/drivers/mfd/qcom-spmi-pmic.c +++ b/drivers/mfd/qcom-spmi-pmic.c @@ -19,6 +19,7 @@ #define PMIC_REV4 0x103 #define PMIC_TYPE 0x104 #define PMIC_SUBTYPE 0x105 +#define PMIC_FAB_ID 0x1f2 #define PMIC_TYPE_VALUE 0x51 @@ -175,6 +176,12 @@ static int pmic_spmi_load_revid(struct regmap *map, struct device *dev, if (ret < 0) return ret; + if (pmic->subtype == PMI8998_SUBTYPE || pmic->subtype == PM660_SUBTYPE) { + ret = regmap_read(map, PMIC_FAB_ID, &pmic->fab_id); + if (ret < 0) + return ret; + } + /* * In early versions of PM8941 and PM8226, the major revision number * started incrementing from 0 (eg 0 = v1.0, 1 = v2.0). diff --git a/include/soc/qcom/qcom-spmi-pmic.h b/include/soc/qcom/qcom-spmi-pmic.h index 5400e6509fe8..ff839b230e62 100644 --- a/include/soc/qcom/qcom-spmi-pmic.h +++ b/include/soc/qcom/qcom-spmi-pmic.h @@ -50,6 +50,7 @@ struct qcom_spmi_pmic { unsigned int major; unsigned int minor; unsigned int rev2; + unsigned int fab_id; const char *name; }; From patchwork Sat Mar 5 02:12:42 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 548590 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 94E28C4332F for ; Sat, 5 Mar 2022 02:13:09 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230429AbiCECN4 (ORCPT ); Fri, 4 Mar 2022 21:13:56 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51916 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230436AbiCECNz (ORCPT ); Fri, 4 Mar 2022 21:13:55 -0500 Received: from mail-wr1-x42e.google.com (mail-wr1-x42e.google.com [IPv6:2a00:1450:4864:20::42e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3A8C51C4B20 for ; Fri, 4 Mar 2022 18:13:05 -0800 (PST) Received: by mail-wr1-x42e.google.com with SMTP id n15so959197wra.6 for ; Fri, 04 Mar 2022 18:13:05 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=BXhDDcjJdPDbZfpGFJmQRsA5lMP0BnPrEwgZzVXptZc=; b=NZ1BlzI4zfSoKVCD/bcoVJWdLwO+Ld1Gbst8/YayG375V+ItoVLuo/iC8tQIiBbhwa vnR5voO3C/PfQkW8pmP9H/trVk4y1nHKzUfwNk/MTemoaJ81xiN+VTE7YBlHH16mHJIx GHO16aA7IMF2wF3GVM5ePtGto2R1mN1EQfEFp62mMNU/sqHpgYFT0ijU8nZj0oCcFdiu E0ab9wOM4h0DeBmYGIW0KViBwdiwnc7p4UhqTSHdo/Ur07wCNf4tQe+22eVauEjYVR+v x1ayS07vhfmrGHztbfIQE/xnqwUS98QuWPMDrE269E4HnrvyUaw3OUwahEd+GcpM4o7K vlQQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=BXhDDcjJdPDbZfpGFJmQRsA5lMP0BnPrEwgZzVXptZc=; b=DLF2KxNH2jqM6+68EAUVfkIcLniMjcdFCHJNVMm/ZB9XJF0gGBvPGH8JkhMNz90abh aDAEgxvmodAgwpq2EBgB0i4OeL0aBHaXhfRNyRLZfW8oubO9qKvspL1rD6AEcAt6nmUf 4D1kiG6BmUKS/uHQzSzNWlcCHJLVmbflSH4rjflIqDpFERfAG3RDgvuadlNNYFi9P+NA K5vex1XlYxcnmlbZ3U7Cm4bIJgPEViRHZQcQLgqu1g5QaZ+QjPaGJ/iXJOr34FkjUmmq c0YR9Sj/M+tSUhD8+PHEt1uOMlWkuwp/qFsEH8YyzBpX8dTyXPGNKMVhHKGFSBV9xaLa PkjA== X-Gm-Message-State: AOAM532uZA9CGjNv40DXv7hY6/Hv2F9nn6XffkXUdntNYvQBRsQMJsJw HnTpLBMjOkd1qQx72zIOZIfLgA== X-Google-Smtp-Source: ABdhPJwoucFAZ5IFWHo9oSMES8xCO1aAOGkWH5CXbW+PVyqhenjH572K8dMvZ+YZt0tp/iKaWzzJxQ== X-Received: by 2002:a5d:47c5:0:b0:1ef:f2e8:11fc with SMTP id o5-20020a5d47c5000000b001eff2e811fcmr924295wrc.109.1646446383718; Fri, 04 Mar 2022 18:13:03 -0800 (PST) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id k10-20020adfe3ca000000b001f0329ba94csm7932589wrm.18.2022.03.04.18.13.02 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 04 Mar 2022 18:13:03 -0800 (PST) From: Caleb Connolly To: caleb.connolly@linaro.org, Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Andy Gross , Bjorn Andersson , Lee Jones , Stephen Boyd , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: sumit.semwal@linaro.org, amit.pundir@linaro.org, john.stultz@linaro.org, Rob Herring Subject: [PATCH v10 4/9] dt-bindings: iio: adc: document qcom-spmi-rradc Date: Sat, 5 Mar 2022 02:12:42 +0000 Message-Id: <20220305021247.1020122-5-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220305021247.1020122-1-caleb.connolly@linaro.org> References: <20220305021247.1020122-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add dt-binding docs for the Qualcomm SPMI RRADC found in PMICs like PMI8998 and PMI8994 Signed-off-by: Caleb Connolly Reviewed-by: Rob Herring --- .../bindings/iio/adc/qcom,spmi-rradc.yaml | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml new file mode 100644 index 000000000000..11d47c46a48d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-rradc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm's SPMI PMIC Round Robin ADC + +maintainers: + - Caleb Connolly + +description: | + The Qualcomm SPMI Round Robin ADC (RRADC) provides interface to clients to read the + voltage, current and temperature for supported peripherals such as the battery thermistor + die temperature, charger temperature, USB and DC input voltage / current and battery ID + resistor. + +properties: + compatible: + enum: + - qcom,pmi8998-rradc + - qcom,pm660-rradc + + reg: + description: rradc base address and length in the SPMI PMIC register map + maxItems: 1 + + qcom,batt-id-delay-ms: + description: + Sets the hardware settling time for the battery ID resistor. + enum: [0, 1, 4, 12, 20, 40, 60, 80] + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pmic { + #address-cells = <1>; + #size-cells = <0>; + + pmic_rradc: adc@4500 { + compatible = "qcom,pmi8998-rradc"; + reg = <0x4500>; + #io-channel-cells = <1>; + }; + }; +... From patchwork Sat Mar 5 02:12:43 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 548588 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A899CC43217 for ; Sat, 5 Mar 2022 02:13:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230450AbiCECN5 (ORCPT ); Fri, 4 Mar 2022 21:13:57 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52024 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230444AbiCECN5 (ORCPT ); Fri, 4 Mar 2022 21:13:57 -0500 Received: from mail-wm1-x330.google.com (mail-wm1-x330.google.com [IPv6:2a00:1450:4864:20::330]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4D53C1C8852 for ; Fri, 4 Mar 2022 18:13:06 -0800 (PST) Received: by mail-wm1-x330.google.com with SMTP id q20so3665170wmq.1 for ; Fri, 04 Mar 2022 18:13:06 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=REDTyUdtZNyGSfH4CHNNJq4RArooQcTLxOU9TF2Lwl8=; b=Y+9qZgfZjgMPw00QMtiOXv9syIYUjQlFyxZz0k7mpLZ25363rKTMpUZXJOfgbwKlO8 7DU1xcvI6K1H0muofjPGUU3kTha5cVYtPbhyWK9hVBRB1AsDz5CUed8pYJWUfsO6GpqZ f7zCBl2Sj0rrFYe2/BwYx44KF/xDHU7j9Z70ryu9F7NZAt2a+mkQNZXCYa9mme53tXw9 G717LdLTujknLtWg7pQnGzzpofLZlZXThX+1eCkLz85uV0OYRGAIknS/DdCAMidsbqod C4DuUbz9b6Tx7OzdF6IvPA2yONhgP2+yi0D6DUy5NQ+4iOML1HT4nUXxxqS15IDPimR/ PRVw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=REDTyUdtZNyGSfH4CHNNJq4RArooQcTLxOU9TF2Lwl8=; b=4TeYVYZmILEUsAXG5shc2xKRWzzJCynmWSk76UPknErseXVRpD8Zy9SXLfgtJCU4l/ /mvGDmgxpD44OpMF3QIkazBWbvFjoJ2KP60avNolve39mFIX4MiTFzICfHKQkjQedSS3 LTVFGYZX8Vj42LCsVxzQcbo5S+L2Kyxguug+MiOa0sJBogifGuQHBlZhI9kn9GfphXkR SDSu5zfIH7By8urPy4WuBomiCHoWHF0k0CNyUE5rARzpEks+alF7dCQ3JuApgBXuV7WJ VpzC38nyXo0MpJLW7OkPWdXJVckxAARmHUIMVNRT1OEvqjp+ajQwd98Yc2X8HwKmnn5k cruw== X-Gm-Message-State: AOAM530EewcwXvGJKHBTq0UVXS/67SdrS8hVkRq9lzDtwnRE0Cjf/+IL guVKSdSHnDKum85Bx0hHn+v3huwVHCvLLw== X-Google-Smtp-Source: ABdhPJzMstDTHuDTLbKYS4ucfJgOPLz9HB+mGkojENLTbB/h3G4O9rxRcXkVaYp2Fm9ih6ySYDi7EQ== X-Received: by 2002:a1c:a443:0:b0:381:d21:de2e with SMTP id n64-20020a1ca443000000b003810d21de2emr10050718wme.131.1646446384771; Fri, 04 Mar 2022 18:13:04 -0800 (PST) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id k10-20020adfe3ca000000b001f0329ba94csm7932589wrm.18.2022.03.04.18.13.03 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 04 Mar 2022 18:13:04 -0800 (PST) From: Caleb Connolly To: caleb.connolly@linaro.org, Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Andy Gross , Bjorn Andersson , Lee Jones , Stephen Boyd , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: sumit.semwal@linaro.org, amit.pundir@linaro.org, john.stultz@linaro.org Subject: [PATCH v10 5/9] iio: adc: qcom-spmi-rradc: introduce round robin adc Date: Sat, 5 Mar 2022 02:12:43 +0000 Message-Id: <20220305021247.1020122-6-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220305021247.1020122-1-caleb.connolly@linaro.org> References: <20220305021247.1020122-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org The Round Robin ADC is responsible for reading data about the rate of charge from the USB or DC input ports, it can also read the battery ID (resistence), skin temperature and the die temperature of the pmic. It is found on the PMI8998 and PM660 Qualcomm PMICs. Signed-off-by: Caleb Connolly --- drivers/iio/adc/Kconfig | 12 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/qcom-spmi-rradc.c | 1021 +++++++++++++++++++++++++++++ 3 files changed, 1034 insertions(+) create mode 100644 drivers/iio/adc/qcom-spmi-rradc.c diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 4fdc8bfbb407..66557b434fa8 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -812,6 +812,18 @@ config QCOM_PM8XXX_XOADC To compile this driver as a module, choose M here: the module will be called qcom-pm8xxx-xoadc. +config QCOM_SPMI_RRADC + tristate "Qualcomm SPMI RRADC" + depends on MFD_SPMI_PMIC + help + This is for the PMIC Round Robin ADC driver. + + This driver exposes the battery ID resistor, battery thermal, PMIC die + temperature, charger USB in and DC in voltage and current. + + To compile this driver as a module, choose M here: the module will + be called qcom-qpmi-rradc. + config QCOM_SPMI_IADC tristate "Qualcomm SPMI PMIC current ADC" depends on SPMI diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 4a8f1833993b..b0dd7f142abd 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -77,6 +77,7 @@ obj-$(CONFIG_NPCM_ADC) += npcm_adc.o obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o obj-$(CONFIG_QCOM_SPMI_ADC5) += qcom-spmi-adc5.o obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o +obj-$(CONFIG_QCOM_SPMI_RRADC) += qcom-spmi-rradc.o obj-$(CONFIG_QCOM_VADC_COMMON) += qcom-vadc-common.o obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o diff --git a/drivers/iio/adc/qcom-spmi-rradc.c b/drivers/iio/adc/qcom-spmi-rradc.c new file mode 100644 index 000000000000..230477fc45d2 --- /dev/null +++ b/drivers/iio/adc/qcom-spmi-rradc.c @@ -0,0 +1,1021 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2016-2017, 2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2022 Linaro Limited. + * Author: Caleb Connolly + * + * This driver is for the Round Robin ADC found in the pmi8998 and pm660 PMICs. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include + +#define DRIVER_NAME "qcom-spmi-rradc" + +#define RR_ADC_EN_CTL 0x46 +#define RR_ADC_SKIN_TEMP_LSB 0x50 +#define RR_ADC_SKIN_TEMP_MSB 0x51 +#define RR_ADC_CTL 0x52 +#define RR_ADC_CTL_CONTINUOUS_SEL BIT(3) +#define RR_ADC_LOG 0x53 +#define RR_ADC_LOG_CLR_CTRL BIT(0) + +#define RR_ADC_FAKE_BATT_LOW_LSB 0x58 +#define RR_ADC_FAKE_BATT_LOW_MSB 0x59 +#define RR_ADC_FAKE_BATT_HIGH_LSB 0x5A +#define RR_ADC_FAKE_BATT_HIGH_MSB 0x5B + +#define RR_ADC_BATT_ID_CTRL 0x60 +#define RR_ADC_BATT_ID_CTRL_CHANNEL_CONV BIT(0) +#define RR_ADC_BATT_ID_TRIGGER 0x61 +#define RR_ADC_BATT_ID_STS 0x62 +#define RR_ADC_BATT_ID_CFG 0x63 +#define BATT_ID_SETTLE_MASK GENMASK(7, 5) +#define RR_ADC_BATT_ID_5_LSB 0x66 +#define RR_ADC_BATT_ID_5_MSB 0x67 +#define RR_ADC_BATT_ID_15_LSB 0x68 +#define RR_ADC_BATT_ID_15_MSB 0x69 +#define RR_ADC_BATT_ID_150_LSB 0x6A +#define RR_ADC_BATT_ID_150_MSB 0x6B + +#define RR_ADC_BATT_THERM_CTRL 0x70 +#define RR_ADC_BATT_THERM_TRIGGER 0x71 +#define RR_ADC_BATT_THERM_STS 0x72 +#define RR_ADC_BATT_THERM_CFG 0x73 +#define RR_ADC_BATT_THERM_LSB 0x74 +#define RR_ADC_BATT_THERM_MSB 0x75 +#define RR_ADC_BATT_THERM_FREQ 0x76 + +#define RR_ADC_AUX_THERM_CTRL 0x80 +#define RR_ADC_AUX_THERM_TRIGGER 0x81 +#define RR_ADC_AUX_THERM_STS 0x82 +#define RR_ADC_AUX_THERM_CFG 0x83 +#define RR_ADC_AUX_THERM_LSB 0x84 +#define RR_ADC_AUX_THERM_MSB 0x85 + +#define RR_ADC_SKIN_HOT 0x86 +#define RR_ADC_SKIN_TOO_HOT 0x87 + +#define RR_ADC_AUX_THERM_C1 0x88 +#define RR_ADC_AUX_THERM_C2 0x89 +#define RR_ADC_AUX_THERM_C3 0x8A +#define RR_ADC_AUX_THERM_HALF_RANGE 0x8B + +#define RR_ADC_USB_IN_V_CTRL 0x90 +#define RR_ADC_USB_IN_V_TRIGGER 0x91 +#define RR_ADC_USB_IN_V_STS 0x92 +#define RR_ADC_USB_IN_V_LSB 0x94 +#define RR_ADC_USB_IN_V_MSB 0x95 +#define RR_ADC_USB_IN_I_CTRL 0x98 +#define RR_ADC_USB_IN_I_TRIGGER 0x99 +#define RR_ADC_USB_IN_I_STS 0x9A +#define RR_ADC_USB_IN_I_LSB 0x9C +#define RR_ADC_USB_IN_I_MSB 0x9D + +#define RR_ADC_DC_IN_V_CTRL 0xA0 +#define RR_ADC_DC_IN_V_TRIGGER 0xA1 +#define RR_ADC_DC_IN_V_STS 0xA2 +#define RR_ADC_DC_IN_V_LSB 0xA4 +#define RR_ADC_DC_IN_V_MSB 0xA5 +#define RR_ADC_DC_IN_I_CTRL 0xA8 +#define RR_ADC_DC_IN_I_TRIGGER 0xA9 +#define RR_ADC_DC_IN_I_STS 0xAA +#define RR_ADC_DC_IN_I_LSB 0xAC +#define RR_ADC_DC_IN_I_MSB 0xAD + +#define RR_ADC_PMI_DIE_TEMP_CTRL 0xB0 +#define RR_ADC_PMI_DIE_TEMP_TRIGGER 0xB1 +#define RR_ADC_PMI_DIE_TEMP_STS 0xB2 +#define RR_ADC_PMI_DIE_TEMP_CFG 0xB3 +#define RR_ADC_PMI_DIE_TEMP_LSB 0xB4 +#define RR_ADC_PMI_DIE_TEMP_MSB 0xB5 + +#define RR_ADC_CHARGER_TEMP_CTRL 0xB8 +#define RR_ADC_CHARGER_TEMP_TRIGGER 0xB9 +#define RR_ADC_CHARGER_TEMP_STS 0xBA +#define RR_ADC_CHARGER_TEMP_CFG 0xBB +#define RR_ADC_CHARGER_TEMP_LSB 0xBC +#define RR_ADC_CHARGER_TEMP_MSB 0xBD +#define RR_ADC_CHARGER_HOT 0xBE +#define RR_ADC_CHARGER_TOO_HOT 0xBF + +#define RR_ADC_GPIO_CTRL 0xC0 +#define RR_ADC_GPIO_TRIGGER 0xC1 +#define RR_ADC_GPIO_STS 0xC2 +#define RR_ADC_GPIO_LSB 0xC4 +#define RR_ADC_GPIO_MSB 0xC5 + +#define RR_ADC_ATEST_CTRL 0xC8 +#define RR_ADC_ATEST_TRIGGER 0xC9 +#define RR_ADC_ATEST_STS 0xCA +#define RR_ADC_ATEST_LSB 0xCC +#define RR_ADC_ATEST_MSB 0xCD +#define RR_ADC_SEC_ACCESS 0xD0 + +#define RR_ADC_PERPH_RESET_CTL2 0xD9 +#define RR_ADC_PERPH_RESET_CTL3 0xDA +#define RR_ADC_PERPH_RESET_CTL4 0xDB +#define RR_ADC_INT_TEST1 0xE0 +#define RR_ADC_INT_TEST_VAL 0xE1 + +#define RR_ADC_TM_TRIGGER_CTRLS 0xE2 +#define RR_ADC_TM_ADC_CTRLS 0xE3 +#define RR_ADC_TM_CNL_CTRL 0xE4 +#define RR_ADC_TM_BATT_ID_CTRL 0xE5 +#define RR_ADC_TM_THERM_CTRL 0xE6 +#define RR_ADC_TM_CONV_STS 0xE7 +#define RR_ADC_TM_ADC_READ_LSB 0xE8 +#define RR_ADC_TM_ADC_READ_MSB 0xE9 +#define RR_ADC_TM_ATEST_MUX_1 0xEA +#define RR_ADC_TM_ATEST_MUX_2 0xEB +#define RR_ADC_TM_REFERENCES 0xED +#define RR_ADC_TM_MISC_CTL 0xEE +#define RR_ADC_TM_RR_CTRL 0xEF + +#define RR_ADC_TRIGGER_EVERY_CYCLE BIT(7) +#define RR_ADC_TRIGGER_CTL BIT(0) + +#define RR_ADC_BATT_ID_RANGE 820 + +#define RR_ADC_BITS 10 +#define RR_ADC_CHAN_MSB (1 << RR_ADC_BITS) +#define RR_ADC_FS_VOLTAGE_MV 2500 + +/* BATT_THERM 0.25K/LSB */ +#define RR_ADC_BATT_THERM_LSB_K 4 + +#define RR_ADC_TEMP_FS_VOLTAGE_NUM 5000000 +#define RR_ADC_TEMP_FS_VOLTAGE_DEN 3 +#define RR_ADC_DIE_TEMP_OFFSET 601400 +#define RR_ADC_DIE_TEMP_SLOPE 2 +#define RR_ADC_DIE_TEMP_OFFSET_MILLI_DEGC 25000 + +#define RR_ADC_CHG_TEMP_GF_OFFSET_UV 1303168 +#define RR_ADC_CHG_TEMP_GF_SLOPE_UV_PER_C 3784 +#define RR_ADC_CHG_TEMP_SMIC_OFFSET_UV 1338433 +#define RR_ADC_CHG_TEMP_SMIC_SLOPE_UV_PER_C 3655 +#define RR_ADC_CHG_TEMP_660_GF_OFFSET_UV 1309001 +#define RR_ADC_CHG_TEMP_660_GF_SLOPE_UV_PER_C 3403 +#define RR_ADC_CHG_TEMP_660_SMIC_OFFSET_UV 1295898 +#define RR_ADC_CHG_TEMP_660_SMIC_SLOPE_UV_PER_C 3596 +#define RR_ADC_CHG_TEMP_660_MGNA_OFFSET_UV 1314779 +#define RR_ADC_CHG_TEMP_660_MGNA_SLOPE_UV_PER_C 3496 +#define RR_ADC_CHG_TEMP_OFFSET_MILLI_DEGC 25000 +#define RR_ADC_CHG_THRESHOLD_SCALE 4 + +#define RR_ADC_VOLT_INPUT_FACTOR 8 +#define RR_ADC_CURR_INPUT_FACTOR 2000 +#define RR_ADC_CURR_USBIN_INPUT_FACTOR_MIL 1886 +#define RR_ADC_CURR_USBIN_660_FACTOR_MIL 9 +#define RR_ADC_CURR_USBIN_660_UV_VAL 579500 + +#define RR_ADC_GPIO_FS_RANGE 5000 +#define RR_ADC_COHERENT_CHECK_RETRY 5 +#define RR_ADC_CHAN_MAX_CONTINUOUS_BUFFER_LEN 16 + +#define RR_ADC_STS_CHANNEL_READING_MASK GENMASK(1, 0) +#define RR_ADC_STS_CHANNEL_STS BIT(1) + +#define RR_ADC_TP_REV_VERSION1 21 +#define RR_ADC_TP_REV_VERSION2 29 +#define RR_ADC_TP_REV_VERSION3 32 + +#define RRADC_BATT_ID_DELAY_MAX 8 + +enum rradc_channel_id { + RR_ADC_BATT_ID = 0, + RR_ADC_BATT_THERM, + RR_ADC_SKIN_TEMP, + RR_ADC_USBIN_I, + RR_ADC_USBIN_V, + RR_ADC_DCIN_I, + RR_ADC_DCIN_V, + RR_ADC_DIE_TEMP, + RR_ADC_CHG_TEMP, + RR_ADC_GPIO, + RR_ADC_CHAN_MAX +}; + +struct rradc_chip; + +/** + * struct rradc_channel - rradc channel data + * @label: channel label + * @lsb: Channel least significant byte + * @status: Channel status address + * @size: number of bytes to read + * @trigger_addr: Trigger address, trigger is only used on some channels + * @trigger_mask: Trigger mask + * @scale_fn: Post process callback for channels which can't be exposed + * as offset + scale. + */ +struct rradc_channel { + const char *label; + u8 lsb; + u8 status; + int size; + int trigger_addr; + int trigger_mask; + int (*scale_fn)(struct rradc_chip *chip, u16 adc_code, int *result); +}; + +struct rradc_chip { + struct device *dev; + const struct qcom_spmi_pmic *pmic; + /* + * Lock held while doing channel conversion + * involving multiple register read/writes + */ + struct mutex conversion_lock; + struct regmap *regmap; + u32 base; + int batt_id_delay; + u16 batt_id_data; +}; + +static const int batt_id_delays[] = { 0, 1, 4, 12, 20, 40, 60, 80 }; +static const struct rradc_channel rradc_chans[RR_ADC_CHAN_MAX]; +static const struct iio_chan_spec rradc_iio_chans[RR_ADC_CHAN_MAX]; + +static int rradc_read(struct rradc_chip *chip, u16 addr, __le16 *buf, int len) +{ + int ret, retry_cnt = 0; + __le16 data_check[RR_ADC_CHAN_MAX_CONTINUOUS_BUFFER_LEN / 2]; + + if (len > RR_ADC_CHAN_MAX_CONTINUOUS_BUFFER_LEN) { + dev_err(chip->dev, + "Can't read more than %d bytes, but asked to read %d bytes.\n", + RR_ADC_CHAN_MAX_CONTINUOUS_BUFFER_LEN, len); + return -EINVAL; + } + + while (retry_cnt < RR_ADC_COHERENT_CHECK_RETRY) { + ret = regmap_bulk_read(chip->regmap, chip->base + addr, buf, + len); + if (ret < 0) { + dev_err(chip->dev, "rr_adc reg 0x%x failed :%d\n", addr, + ret); + return ret; + } + + ret = regmap_bulk_read(chip->regmap, chip->base + addr, + data_check, len); + if (ret < 0) { + dev_err(chip->dev, "rr_adc reg 0x%x failed :%d\n", addr, + ret); + return ret; + } + + if (memcmp(buf, data_check, len) != 0) { + retry_cnt++; + dev_dbg(chip->dev, + "coherent read error, retry_cnt:%d\n", + retry_cnt); + continue; + } + + break; + } + + if (retry_cnt == RR_ADC_COHERENT_CHECK_RETRY) + dev_err(chip->dev, "Retry exceeded for coherrency check\n"); + + return ret; +} + +static int rradc_get_fab_coeff(struct rradc_chip *chip, int64_t *offset, + int64_t *slope) +{ + if (chip->pmic->subtype == PM660_SUBTYPE) { + switch (chip->pmic->fab_id) { + case PM660_FAB_ID_GF: + *offset = RR_ADC_CHG_TEMP_660_GF_OFFSET_UV; + *slope = RR_ADC_CHG_TEMP_660_GF_SLOPE_UV_PER_C; + return 0; + case PM660_FAB_ID_TSMC: + *offset = RR_ADC_CHG_TEMP_660_SMIC_OFFSET_UV; + *slope = RR_ADC_CHG_TEMP_660_SMIC_SLOPE_UV_PER_C; + return 0; + default: + *offset = RR_ADC_CHG_TEMP_660_MGNA_OFFSET_UV; + *slope = RR_ADC_CHG_TEMP_660_MGNA_SLOPE_UV_PER_C; + } + } else if (chip->pmic->subtype == PMI8998_SUBTYPE) { + switch (chip->pmic->fab_id) { + case PMI8998_FAB_ID_GF: + *offset = RR_ADC_CHG_TEMP_GF_OFFSET_UV; + *slope = RR_ADC_CHG_TEMP_GF_SLOPE_UV_PER_C; + return 0; + case PMI8998_FAB_ID_SMIC: + *offset = RR_ADC_CHG_TEMP_SMIC_OFFSET_UV; + *slope = RR_ADC_CHG_TEMP_SMIC_SLOPE_UV_PER_C; + return 0; + default: + return -EINVAL; + } + } + + return -EINVAL; +} + +/* + * These functions explicitly cast int64_t to int. + * They will never overflow, as the values are small enough. + */ +static int rradc_post_process_batt_id(struct rradc_chip *chip, u16 adc_code, + int *result_ohms) +{ + uint32_t current_value; + int64_t r_id; + + current_value = chip->batt_id_data; + r_id = ((int64_t)adc_code * RR_ADC_FS_VOLTAGE_MV); + r_id = div64_s64(r_id, (RR_ADC_CHAN_MSB * current_value)); + *result_ohms = (int)(r_id * MILLI); + + return 0; +} + +static int rradc_enable_continuous_mode(struct rradc_chip *chip) +{ + int ret; + + /* Clear channel log */ + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_LOG, + RR_ADC_LOG_CLR_CTRL, RR_ADC_LOG_CLR_CTRL); + if (ret < 0) { + dev_err(chip->dev, "log ctrl update to clear failed:%d\n", ret); + return ret; + } + + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_LOG, + RR_ADC_LOG_CLR_CTRL, 0); + if (ret < 0) { + dev_err(chip->dev, "log ctrl update to not clear failed:%d\n", + ret); + return ret; + } + + /* Switch to continuous mode */ + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_CTL, + RR_ADC_CTL_CONTINUOUS_SEL, + RR_ADC_CTL_CONTINUOUS_SEL); + if (ret < 0) + dev_err(chip->dev, "Update to continuous mode failed:%d\n", + ret); + + return ret; +} + +static int rradc_disable_continuous_mode(struct rradc_chip *chip) +{ + int ret; + + /* Switch to non continuous mode */ + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_CTL, + RR_ADC_CTL_CONTINUOUS_SEL, 0); + if (ret < 0) + dev_err(chip->dev, "Update to non-continuous mode failed:%d\n", + ret); + + return ret; +} + +static bool rradc_is_ready(struct rradc_chip *chip, + enum rradc_channel_id chan_address) +{ + const struct rradc_channel *chan = &rradc_chans[chan_address]; + int ret; + unsigned int status, mask; + + /* BATT_ID STS bit does not get set initially */ + switch (chan_address) { + case RR_ADC_BATT_ID: + mask = RR_ADC_STS_CHANNEL_STS; + break; + default: + mask = RR_ADC_STS_CHANNEL_READING_MASK; + break; + } + + ret = regmap_read(chip->regmap, chip->base + chan->status, &status); + if (ret < 0 || !(status & mask)) + return false; + + return true; +} + +static int rradc_read_status_in_cont_mode(struct rradc_chip *chip, + enum rradc_channel_id chan_address) +{ + const struct rradc_channel *chan = &rradc_chans[chan_address]; + const struct iio_chan_spec *iio_chan = &rradc_iio_chans[chan_address]; + int ret, i; + + if (chan->trigger_mask == 0) { + dev_err(chip->dev, "Channel doesn't have a trigger mask\n"); + return -EINVAL; + } + + ret = regmap_update_bits(chip->regmap, chip->base + chan->trigger_addr, + chan->trigger_mask, chan->trigger_mask); + if (ret < 0) { + dev_err(chip->dev, + "Failed to apply trigger for channel '%s' ret=%d\n", + iio_chan->extend_name, ret); + return ret; + } + + ret = rradc_enable_continuous_mode(chip); + if (ret < 0) { + dev_err(chip->dev, "Failed to switch to continuous mode\n"); + goto disable_trigger; + } + + /* + * The wait/sleep values were found through trial and error, + * this is mostly for the battery ID channel which takes some + * time to settle. + */ + for (i = 0; i < 5; i++) { + if (rradc_is_ready(chip, chan_address)) + break; + usleep_range(50000, 50000 + 500); + } + + if (i == 5) { + dev_err(chip->dev, "Channel '%s' is not ready\n", + iio_chan->extend_name); + ret = -ETIMEDOUT; + } + + rradc_disable_continuous_mode(chip); + +disable_trigger: + regmap_update_bits(chip->regmap, chip->base + chan->trigger_addr, + chan->trigger_mask, 0); + + return ret; +} + +static int rradc_prepare_batt_id_conversion(struct rradc_chip *chip, + enum rradc_channel_id chan_address, + u16 *data) +{ + int ret; + + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_BATT_ID_CTRL, + RR_ADC_BATT_ID_CTRL_CHANNEL_CONV, + RR_ADC_BATT_ID_CTRL_CHANNEL_CONV); + if (ret < 0) { + dev_err(chip->dev, "Enabling BATT ID channel failed:%d\n", ret); + return ret; + } + + ret = regmap_update_bits(chip->regmap, + chip->base + RR_ADC_BATT_ID_TRIGGER, + RR_ADC_TRIGGER_CTL, RR_ADC_TRIGGER_CTL); + if (ret < 0) { + dev_err(chip->dev, "BATT_ID trigger set failed:%d\n", ret); + goto out_disable_batt_id; + } + + ret = rradc_read_status_in_cont_mode(chip, chan_address); + + /* Reset registers back to default values */ + regmap_update_bits(chip->regmap, chip->base + RR_ADC_BATT_ID_TRIGGER, + RR_ADC_TRIGGER_CTL, 0); + +out_disable_batt_id: + regmap_update_bits(chip->regmap, chip->base + RR_ADC_BATT_ID_CTRL, + RR_ADC_BATT_ID_CTRL_CHANNEL_CONV, 0); + + return ret; +} + +static int rradc_do_conversion(struct rradc_chip *chip, + enum rradc_channel_id chan_address, u16 *data) +{ + const struct rradc_channel *chan = &rradc_chans[chan_address]; + const struct iio_chan_spec *iio_chan = &rradc_iio_chans[chan_address]; + int ret; + __le16 buf[3]; + + mutex_lock(&chip->conversion_lock); + + switch (chan_address) { + case RR_ADC_BATT_ID: + ret = rradc_prepare_batt_id_conversion(chip, chan_address, data); + if (ret < 0) { + dev_err(chip->dev, "Battery ID conversion failed:%d\n", + ret); + goto unlock_out; + } + break; + + case RR_ADC_USBIN_V: + case RR_ADC_DIE_TEMP: + ret = rradc_read_status_in_cont_mode(chip, chan_address); + if (ret < 0) { + dev_err(chip->dev, + "Error reading in continuous mode:%d\n", ret); + goto unlock_out; + } + break; + default: + if (!rradc_is_ready(chip, chan_address)) { + /* + * Usually this means the channel isn't attached, for example + * the in_voltage_usbin_v_input channel will not be ready if + * no USB cable is attached + */ + dev_dbg(chip->dev, "channel '%s' is not ready\n", + iio_chan->extend_name); + ret = -ENODATA; + goto unlock_out; + } + break; + } + + ret = rradc_read(chip, chan->lsb, buf, chan->size); + if (ret) { + dev_err(chip->dev, "read data failed\n"); + goto unlock_out; + } + + /* + * For the battery ID we read the register for every ID ADC and then + * see which one is actually connected. + */ + if (chan_address == RR_ADC_BATT_ID) { + u16 batt_id_150 = le16_to_cpu(buf[2]); + u16 batt_id_15 = le16_to_cpu(buf[1]); + u16 batt_id_5 = le16_to_cpu(buf[0]); + + if (!batt_id_150 && !batt_id_15 && !batt_id_5) { + dev_err(chip->dev, + "Invalid batt_id values with all zeros\n"); + ret = -EINVAL; + goto unlock_out; + } + + if (batt_id_150 <= RR_ADC_BATT_ID_RANGE) { + *data = batt_id_150; + chip->batt_id_data = 150; + } else if (batt_id_15 <= RR_ADC_BATT_ID_RANGE) { + *data = batt_id_15; + chip->batt_id_data = 15; + } else { + *data = batt_id_5; + chip->batt_id_data = 5; + } + } else { + /* + * All of the other channels are either 1 or 2 bytes. + * We can rely on the second byte being 0 for 1-byte channels. + */ + *data = le16_to_cpu(buf[0]); + } + +unlock_out: + mutex_unlock(&chip->conversion_lock); + + return ret; +} + +static int rradc_read_scale(struct rradc_chip *chip, int chan_address, int *val, + int *val2) +{ + int64_t fab_offset, fab_slope; + int ret; + + ret = rradc_get_fab_coeff(chip, &fab_offset, &fab_slope); + if (ret < 0) { + dev_err(chip->dev, "Unable to get fab id coefficients\n"); + return -EINVAL; + } + + switch (chan_address) { + case RR_ADC_SKIN_TEMP: + *val = MILLI; + *val2 = RR_ADC_BATT_THERM_LSB_K; + return IIO_VAL_FRACTIONAL; + case RR_ADC_USBIN_I: + *val = RR_ADC_CURR_USBIN_INPUT_FACTOR_MIL * + RR_ADC_FS_VOLTAGE_MV; + *val2 = RR_ADC_CHAN_MSB; + return IIO_VAL_FRACTIONAL; + case RR_ADC_DCIN_I: + *val = RR_ADC_CURR_INPUT_FACTOR * RR_ADC_FS_VOLTAGE_MV; + *val2 = RR_ADC_CHAN_MSB; + return IIO_VAL_FRACTIONAL; + case RR_ADC_USBIN_V: + case RR_ADC_DCIN_V: + *val = RR_ADC_VOLT_INPUT_FACTOR * RR_ADC_FS_VOLTAGE_MV * MILLI; + *val2 = RR_ADC_CHAN_MSB; + return IIO_VAL_FRACTIONAL; + case RR_ADC_GPIO: + *val = RR_ADC_GPIO_FS_RANGE; + *val2 = RR_ADC_CHAN_MSB; + return IIO_VAL_FRACTIONAL; + case RR_ADC_CHG_TEMP: + /* + * We divide val2 by MILLI instead of multiplying val + * to avoid an integer overflow. + */ + *val = -RR_ADC_TEMP_FS_VOLTAGE_NUM; + *val2 = div64_s64(RR_ADC_TEMP_FS_VOLTAGE_DEN * RR_ADC_CHAN_MSB * + fab_slope, + MILLI); + + return IIO_VAL_FRACTIONAL; + case RR_ADC_DIE_TEMP: + *val = RR_ADC_TEMP_FS_VOLTAGE_NUM; + *val2 = RR_ADC_TEMP_FS_VOLTAGE_DEN * RR_ADC_CHAN_MSB * + RR_ADC_DIE_TEMP_SLOPE; + + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } +} + +static int rradc_read_offset(struct rradc_chip *chip, int chan_address, int *val) +{ + int64_t fab_offset, fab_slope; + int64_t offset1, offset2; + int ret; + + switch (chan_address) { + case RR_ADC_SKIN_TEMP: + /* + * Offset from kelvin to degC, divided by the + * scale factor (250). We lose some precision here. + * 273150 / 250 = 1092.6 + */ + *val = div64_s64(ABSOLUTE_ZERO_MILLICELSIUS, + (MILLI / RR_ADC_BATT_THERM_LSB_K)); + return IIO_VAL_INT; + case RR_ADC_CHG_TEMP: + ret = rradc_get_fab_coeff(chip, &fab_offset, &fab_slope); + if (ret < 0) { + dev_err(chip->dev, + "Unable to get fab id coefficients\n"); + return -EINVAL; + } + offset1 = -(fab_offset * RR_ADC_TEMP_FS_VOLTAGE_DEN * + RR_ADC_CHAN_MSB); + offset1 += (int64_t)RR_ADC_TEMP_FS_VOLTAGE_NUM / 2ULL; + offset1 = div64_s64(offset1, + (int64_t)(RR_ADC_TEMP_FS_VOLTAGE_NUM)); + + offset2 = (int64_t)RR_ADC_CHG_TEMP_OFFSET_MILLI_DEGC * + RR_ADC_TEMP_FS_VOLTAGE_DEN * RR_ADC_CHAN_MSB * + (int64_t)fab_slope; + offset2 += ((int64_t)MILLI * RR_ADC_TEMP_FS_VOLTAGE_NUM) / 2; + offset2 = div64_s64( + offset2, ((int64_t)MILLI * RR_ADC_TEMP_FS_VOLTAGE_NUM)); + + /* + * The -1 is to compensate for lost precision. + * It should actually be -0.7906976744186046. + * This works out to every value being off + * by about +0.091 degrees C after applying offset and scale. + */ + *val = (int)(offset1 - offset2 - 1); + return IIO_VAL_INT; + case RR_ADC_DIE_TEMP: + offset1 = -RR_ADC_DIE_TEMP_OFFSET * + (int64_t)RR_ADC_TEMP_FS_VOLTAGE_DEN * + (int64_t)RR_ADC_CHAN_MSB; + offset1 = div64_s64(offset1, RR_ADC_TEMP_FS_VOLTAGE_NUM); + + offset2 = -(int64_t)RR_ADC_CHG_TEMP_OFFSET_MILLI_DEGC * + RR_ADC_TEMP_FS_VOLTAGE_DEN * RR_ADC_CHAN_MSB * + RR_ADC_DIE_TEMP_SLOPE; + offset2 = div64_s64(offset2, + ((int64_t)RR_ADC_TEMP_FS_VOLTAGE_NUM)); + + /* + * The result is -339, it should be -338.69789, this results + * in the calculated die temp being off by + * -0.004 - -0.0175 degrees C + */ + *val = (int)(offset1 - offset2); + return IIO_VAL_INT; + default: + break; + } + return -EINVAL; +} + +static int rradc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan_spec, int *val, + int *val2, long mask) +{ + struct rradc_chip *chip = iio_priv(indio_dev); + const struct rradc_channel *chan; + int ret; + u16 adc_code; + + if (chan_spec->address >= RR_ADC_CHAN_MAX) { + dev_err(chip->dev, "Invalid channel index:%lu\n", + chan_spec->address); + return -EINVAL; + } + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return rradc_read_scale(chip, chan_spec->address, val, val2); + case IIO_CHAN_INFO_OFFSET: + return rradc_read_offset(chip, chan_spec->address, val); + case IIO_CHAN_INFO_RAW: + ret = rradc_do_conversion(chip, chan_spec->address, &adc_code); + if (ret < 0) + return ret; + + *val = adc_code; + return IIO_VAL_INT; + case IIO_CHAN_INFO_PROCESSED: + chan = &rradc_chans[chan_spec->address]; + if (!chan->scale_fn) + return -EINVAL; + ret = rradc_do_conversion(chip, chan_spec->address, &adc_code); + if (ret < 0) + return ret; + + *val = chan->scale_fn(chip, adc_code, val); + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int rradc_read_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, char *label) +{ + return snprintf(label, PAGE_SIZE, "%s\n", + rradc_chans[chan->address].label); +} + +static const struct iio_info rradc_info = { + .read_raw = rradc_read_raw, + .read_label = rradc_read_label, +}; + +static const struct rradc_channel rradc_chans[RR_ADC_CHAN_MAX] = { + { + .label = "batt_id", + .scale_fn = rradc_post_process_batt_id, + .lsb = RR_ADC_BATT_ID_5_LSB, + .status = RR_ADC_BATT_ID_STS, + .size = 6, + .trigger_addr = RR_ADC_BATT_ID_TRIGGER, + .trigger_mask = BIT(0), + }, { + .label = "batt", + .lsb = RR_ADC_BATT_THERM_LSB, + .status = RR_ADC_BATT_THERM_STS, + .size = 2, + .trigger_addr = RR_ADC_BATT_THERM_TRIGGER, + }, { + .label = "pmi8998_skin", + .lsb = RR_ADC_SKIN_TEMP_LSB, + .status = RR_ADC_AUX_THERM_STS, + .size = 2, + .trigger_addr = RR_ADC_AUX_THERM_TRIGGER, + }, { + .label = "usbin_i", + .lsb = RR_ADC_USB_IN_I_LSB, + .status = RR_ADC_USB_IN_I_STS, + .size = 2, + .trigger_addr = RR_ADC_USB_IN_I_TRIGGER, + }, { + .label = "usbin_v", + .lsb = RR_ADC_USB_IN_V_LSB, + .status = RR_ADC_USB_IN_V_STS, + .size = 2, + .trigger_addr = RR_ADC_USB_IN_V_TRIGGER, + .trigger_mask = BIT(7), + }, { + .label = "dcin_i", + .lsb = RR_ADC_DC_IN_I_LSB, + .status = RR_ADC_DC_IN_I_STS, + .size = 2, + .trigger_addr = RR_ADC_DC_IN_I_TRIGGER, + }, { + .label = "dcin_v", + .lsb = RR_ADC_DC_IN_V_LSB, + .status = RR_ADC_DC_IN_V_STS, + .size = 2, + .trigger_addr = RR_ADC_DC_IN_V_TRIGGER, + }, { + .label = "pmi8998_die", + .lsb = RR_ADC_PMI_DIE_TEMP_LSB, + .status = RR_ADC_PMI_DIE_TEMP_STS, + .size = 2, + .trigger_addr = RR_ADC_PMI_DIE_TEMP_TRIGGER, + .trigger_mask = RR_ADC_TRIGGER_EVERY_CYCLE, + }, { + .label = "chg", + .lsb = RR_ADC_CHARGER_TEMP_LSB, + .status = RR_ADC_CHARGER_TEMP_STS, + .size = 2, + .trigger_addr = RR_ADC_CHARGER_TEMP_TRIGGER, + }, { + .label = "gpio", + .lsb = RR_ADC_GPIO_LSB, + .status = RR_ADC_GPIO_STS, + .size = 2, + .trigger_addr = RR_ADC_GPIO_TRIGGER, + }, +}; + +static const struct iio_chan_spec rradc_iio_chans[RR_ADC_CHAN_MAX] = { + { + .type = IIO_RESISTANCE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .address = RR_ADC_BATT_ID, + .channel = 0, + .indexed = 1, + }, { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .address = RR_ADC_BATT_THERM, + .channel = 0, + .indexed = 1, + }, { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + .address = RR_ADC_SKIN_TEMP, + .channel = 1, + .indexed = 1, + }, { + .type = IIO_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .address = RR_ADC_USBIN_I, + .channel = 0, + .indexed = 1, + }, { + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .address = RR_ADC_USBIN_V, + .channel = 0, + .indexed = 1, + }, { + .type = IIO_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .address = RR_ADC_DCIN_I, + .channel = 1, + .indexed = 1, + }, { + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .address = RR_ADC_DCIN_V, + .channel = 1, + .indexed = 1, + }, { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + .address = RR_ADC_DIE_TEMP, + .channel = 2, + .indexed = 1, + }, { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + .address = RR_ADC_CHG_TEMP, + .channel = 3, + .indexed = 1, + }, { + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .address = RR_ADC_GPIO, + .channel = 2, + .indexed = 1, + }, +}; + +static int rradc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct iio_dev *indio_dev; + struct rradc_chip *chip; + int ret, i, batt_id_delay; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*chip)); + if (!indio_dev) + return -ENOMEM; + + chip = iio_priv(indio_dev); + chip->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!chip->regmap) { + dev_err(dev, "Couldn't get parent's regmap\n"); + return -EINVAL; + } + + chip->dev = dev; + mutex_init(&chip->conversion_lock); + + ret = device_property_read_u32(dev, "reg", &chip->base); + if (ret < 0) { + dev_err(chip->dev, "Couldn't find reg address, ret = %d\n", + ret); + return ret; + } + + batt_id_delay = -1; + ret = device_property_read_u32(dev, "qcom,batt-id-delay-ms", + &batt_id_delay); + if (!ret) { + for (i = 0; i < RRADC_BATT_ID_DELAY_MAX; i++) { + if (batt_id_delay == batt_id_delays[i]) + break; + } + if (i == RRADC_BATT_ID_DELAY_MAX) + batt_id_delay = -1; + } + + if (batt_id_delay >= 0) { + batt_id_delay = FIELD_PREP(BATT_ID_SETTLE_MASK, batt_id_delay); + ret = regmap_update_bits(chip->regmap, + chip->base + RR_ADC_BATT_ID_CFG, + batt_id_delay, batt_id_delay); + if (ret < 0) { + dev_err(chip->dev, + "BATT_ID settling time config failed:%d\n", + ret); + } + } + + /* Get the PMIC revision, we need it to handle some varying coefficients */ + chip->pmic = qcom_pmic_get(chip->dev); + if (IS_ERR(chip->pmic)) { + dev_err(chip->dev, "Unable to get reference to PMIC device\n"); + return PTR_ERR(chip->pmic); + } + + switch (chip->pmic->subtype) { + case PMI8998_SUBTYPE: + indio_dev->name = "pmi8998-rradc"; + break; + case PM660_SUBTYPE: + indio_dev->name = "pm660-rradc"; + break; + default: + indio_dev->name = DRIVER_NAME; + break; + } + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &rradc_info; + indio_dev->channels = rradc_iio_chans; + indio_dev->num_channels = ARRAY_SIZE(rradc_iio_chans); + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct of_device_id rradc_match_table[] = { + { .compatible = "qcom,pm660-rradc" }, + { .compatible = "qcom,pmi8998-rradc" }, + {} +}; +MODULE_DEVICE_TABLE(of, rradc_match_table); + +static struct platform_driver rradc_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = rradc_match_table, + }, + .probe = rradc_probe, +}; +module_platform_driver(rradc_driver); + +MODULE_DESCRIPTION("QCOM SPMI PMIC RR ADC driver"); +MODULE_AUTHOR("Caleb Connolly "); +MODULE_LICENSE("GPL v2"); From patchwork Sat Mar 5 02:12:44 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 548589 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7AA16C4321E for ; Sat, 5 Mar 2022 02:13:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230443AbiCECN6 (ORCPT ); Fri, 4 Mar 2022 21:13:58 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52068 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230448AbiCECN5 (ORCPT ); Fri, 4 Mar 2022 21:13:57 -0500 Received: from mail-wm1-x336.google.com (mail-wm1-x336.google.com [IPv6:2a00:1450:4864:20::336]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5A6801C9473 for ; Fri, 4 Mar 2022 18:13:07 -0800 (PST) Received: by mail-wm1-x336.google.com with SMTP id 19so5734790wmy.3 for ; Fri, 04 Mar 2022 18:13:07 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=zozG4Oy5Pt0vWjsRDZ91928+qvWs4STBKU9M4pGg1h4=; b=uNRtyAzfKZk14qzM1batj5nvP+iQvPUNDegJJQK83K1IgweksKvchgSWmLgO2BZzQp ClO3l7Fy3HeW7MgDBELGwm9csWHHvEDzGZBo/r0BhVARGnXGsLQ8t+AJxvJDZ3CFx2eB ZkUc+aMau5yNYCYl15qhVm9vgm8aaWVFcD6lXuVeH9E7p7fzkZ2WKh9ZdCpjnSaYVYzA gy7x7vQjt8Kp4UGHbdFOWzIubp31PQWpji35WBPmNESSdOAUpqqXWDFNpla7z5AoCZFv v3GYmki/Yq3agBY1ywJ4/KQ4e/a8TMrI99oOge12BxniPS1tvPZYy+buDeENdVXP//tZ O36Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=zozG4Oy5Pt0vWjsRDZ91928+qvWs4STBKU9M4pGg1h4=; b=Y1JFXcwrP5BKiijEijc9DnBWO8Bf7POGuTocfIXn0f0J0e6hHYP01ys3Cf6BoiVkbD KVUs5MkDY96W3Wb4ZrDi/ZBBwo9DWr87e5flFz9VXRC0MX5crXSBnqYirTuTZNcEZtZO K8YonDWkjyRyEb71gvUxBMiZ6ltemr0a7gjFgyVlisk5mf4z0hhXizZG/llsRkXJftWq 0m0QpLj6YqQW96Wyf3jSsuJ5VT3FwdHBfjbbiadYo0SFpyrIl7VoWES9C9jMBoDULjBq kxiUANyM7cjqEVAiURQqK2V8C+J5TjJJ9b2bYvw3hfachxX3nZfQ/v9mJR/tSf09qp2F Aing== X-Gm-Message-State: AOAM532BcXr1nvKjdl5qI2eirGW00QaL6T2EYCURO2CjcdvHVtGCNuMa u6dLDv8ej1nDyh5Zgn42zr5j/g== X-Google-Smtp-Source: ABdhPJyQlL/v7fgTy9ZWrRRl6L7c1rpHSOz/MoFG4kl2f8XD/xuim/aY9pTifCrovr98IxCunVe9sA== X-Received: by 2002:a05:600c:795:b0:381:87d9:e566 with SMTP id z21-20020a05600c079500b0038187d9e566mr9969267wmo.100.1646446385974; Fri, 04 Mar 2022 18:13:05 -0800 (PST) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id k10-20020adfe3ca000000b001f0329ba94csm7932589wrm.18.2022.03.04.18.13.04 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 04 Mar 2022 18:13:05 -0800 (PST) From: Caleb Connolly To: caleb.connolly@linaro.org, Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Andy Gross , Bjorn Andersson , Lee Jones , Stephen Boyd , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: sumit.semwal@linaro.org, amit.pundir@linaro.org, john.stultz@linaro.org Subject: [PATCH v10 6/9] arm64: dts: qcom: pmi8998: add rradc node Date: Sat, 5 Mar 2022 02:12:44 +0000 Message-Id: <20220305021247.1020122-7-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220305021247.1020122-1-caleb.connolly@linaro.org> References: <20220305021247.1020122-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add a DT node for the Round Robin ADC found in the PMI8998 PMIC. Signed-off-by: Caleb Connolly --- arch/arm64/boot/dts/qcom/pmi8998.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index 0fef5f113f05..da10668c361d 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -18,6 +18,14 @@ pmi8998_gpio: gpios@c000 { interrupt-controller; #interrupt-cells = <2>; }; + + pmi8998_rradc: rradc@4500 { + compatible = "qcom,pmi8998-rradc"; + reg = <0x4500>; + #io-channel-cells = <1>; + + status = "disabled"; + }; }; pmi8998_lsid1: pmic@3 { From patchwork Sat Mar 5 02:12:45 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 549397 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D8950C4332F for ; Sat, 5 Mar 2022 02:13:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230457AbiCECN7 (ORCPT ); Fri, 4 Mar 2022 21:13:59 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52098 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230446AbiCECN6 (ORCPT ); Fri, 4 Mar 2022 21:13:58 -0500 Received: from mail-wm1-x32e.google.com (mail-wm1-x32e.google.com [IPv6:2a00:1450:4864:20::32e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6008E1C7E85 for ; Fri, 4 Mar 2022 18:13:08 -0800 (PST) Received: by mail-wm1-x32e.google.com with SMTP id bi14-20020a05600c3d8e00b00386f2897400so2397988wmb.5 for ; Fri, 04 Mar 2022 18:13:08 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=qImSYxU2i/y/qV71r8EFW+LTWk9ZfhM4KeM2jcTcklQ=; b=od4dbBtlluJessccDg4AkT69g3pCqfXfo8yCJEqu3wkOWoS8+CzXJ+5gmc0jWCMmnI fWrjRuMA5u8KAwkmJZFYm9EbBMVzDt/YxcijtER0CMB7Qe1Xcr833siuyxF83lFopTXe muCuEzDsy2drrJoSajGth6BbAqDuAc6JN1n97wEMxqWyvmLLwCbXEYkF6Du1mcHxXloY wi1ASRDJ4GlFy6vwQS80+/cLceAAVhnaInpzirn8V/PaPVY3N5tsaTf+LxPQD01anM6p aB7etHsY1EwasE5FyUBhx60KT3unkK6HAAIzNMdMKiNBqM1s2u/e9d17HnRGvxjrsm3g d7DQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=qImSYxU2i/y/qV71r8EFW+LTWk9ZfhM4KeM2jcTcklQ=; b=NdtuU9jGUjfS8gk0CiqTqaDZaMoiogJJokRvGcmP2bAmnVL7iQOTZ1+dBnls4xPmjR U0lCXdLEMrLxEZOrteWd9jHhWh1HeMOhkf8i4IpQbJuHuwU3uDiNvMIZb72yLem/zPNH XpFQhEA/cwuwUSLnlOO1hCDAm6dRbKhM+GDlfKVVRNL+upDDcLOawpZZatXzJxYhk15k BzJd3FgEEKo5NKOY3K5GQAGNvXAiemPsxjqTpHItr/l3Fm4+GtHkznNhaI2Jh5uy5pOg 7RdBPym49HfJr0kIdVCyEBKRcYCcmWJKZ5w9NwrK2hPaoyLDmdlFL8Y18eg28u+xPacZ tBNg== X-Gm-Message-State: AOAM530kine8S8GA6Rnu4J/RRAphIRHz/LwEWhuyv+AliWMv0bALMs0w BikDT0IiuxMIOcSrupH1GwyfzA== X-Google-Smtp-Source: ABdhPJwhpt3Knhm2vcjf4Pwj9anxlhIVFtgmakJejVTcuQ6uzl2qTKAG/2KbsXrBY1lkQPuR3ge/XQ== X-Received: by 2002:a7b:c351:0:b0:381:6824:aa61 with SMTP id l17-20020a7bc351000000b003816824aa61mr844990wmj.19.1646446386970; Fri, 04 Mar 2022 18:13:06 -0800 (PST) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id k10-20020adfe3ca000000b001f0329ba94csm7932589wrm.18.2022.03.04.18.13.06 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 04 Mar 2022 18:13:06 -0800 (PST) From: Caleb Connolly To: caleb.connolly@linaro.org, Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Andy Gross , Bjorn Andersson , Lee Jones , Stephen Boyd , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: sumit.semwal@linaro.org, amit.pundir@linaro.org, john.stultz@linaro.org Subject: [PATCH v10 7/9] arm64: dts: qcom: sdm845-oneplus: enable rradc Date: Sat, 5 Mar 2022 02:12:45 +0000 Message-Id: <20220305021247.1020122-8-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220305021247.1020122-1-caleb.connolly@linaro.org> References: <20220305021247.1020122-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Enable the RRADC for the OnePlus 6. Signed-off-by: Caleb Connolly --- arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 7f42e5315ecb..e8287cf02511 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -450,6 +450,10 @@ pinconf { }; }; +&pmi8998_rradc { + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; From patchwork Sat Mar 5 02:12:46 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 549396 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8D760C46467 for ; Sat, 5 Mar 2022 02:13:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230447AbiCECOA (ORCPT ); Fri, 4 Mar 2022 21:14:00 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52096 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230453AbiCECN6 (ORCPT ); Fri, 4 Mar 2022 21:13:58 -0500 Received: from mail-wm1-x32e.google.com (mail-wm1-x32e.google.com [IPv6:2a00:1450:4864:20::32e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5B2061C6673 for ; Fri, 4 Mar 2022 18:13:09 -0800 (PST) Received: by mail-wm1-x32e.google.com with SMTP id m42-20020a05600c3b2a00b00382ab337e14so6971576wms.3 for ; Fri, 04 Mar 2022 18:13:09 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=o/d166yo9TtkM4+c7x0I89HNNMPO2K1Na/pBqagV1Y0=; b=oTlV0iNlHqaGC2VFPFqInEY5gDuzfrfhklHFGgpfQ88/ZgDTBesbLDynLkeJN3sgjz ERBQQAgP3qFPrXAmWswuUPZMtW7iZZdAUWaVTiXH/5w5qe+Fx6m+25Zia0TmHR3HbbQL DIxyMzWvuWd3Oxjzob6+tQMkDoSq+1sYBXGXl4jlOpMZm7H4qpyGQYWDxVt1VnJXCQe4 0guiLkqHaEOxV1rhq7R8L9j28+EnPMeXmhV/5v33jIIFwwbPe6PN6I7nfhr3ccKiXqay FhShJkYggyVnVrJ64exIL14Tvj+eXrJp1Fp1bE82xKDIBzoCF8YThUjBSl3Iu8wvstTh exVQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=o/d166yo9TtkM4+c7x0I89HNNMPO2K1Na/pBqagV1Y0=; b=7qE2Z2zHODFQP30v+mPgDV6xVECtwEo8xYqRAfspaDofLmnQke4K8BI9r6k3/3gLjR iydMhLXCPEl0PEsPZ+8syz3WqW0dGM2CYVVQnui31LNuWUvOZKznNDcsNjfUHQvK0/hG SA13d9DpICB8x0MbkvIH0CGkzkBtdeEiFJ0nWDaMewHgsCGAV7Xhxl7Nmb0DjL+/5web 3cIybVc02QHm8ttYNLBYcvgnTEwnzW0H74v7r+pmGyvRp/vK9fggvH83ABu57SsUEsqb Hcqj49LkfURsE1RfsIcLnobDx+YEmFWAk4otHBcOId0ELiFkKfjkEL5NkTQ+IvlStGJa oRAg== X-Gm-Message-State: AOAM530prlbmQFHN615dCMZatJd5PZWiVgNtNC/emFnVi2ahIK5ywNxa 7r4wSfVsFJd0S/GbSgrlE/65VQ== X-Google-Smtp-Source: ABdhPJwe8kJNmHKlUsT0cxlKhTdi2UvNRBLK686PoLR+14ZU7F4vYDY//SuZp+xnYzjlQuIY5G+zQQ== X-Received: by 2002:a05:600c:2101:b0:381:2275:1d71 with SMTP id u1-20020a05600c210100b0038122751d71mr9580186wml.90.1646446388014; Fri, 04 Mar 2022 18:13:08 -0800 (PST) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id k10-20020adfe3ca000000b001f0329ba94csm7932589wrm.18.2022.03.04.18.13.07 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 04 Mar 2022 18:13:07 -0800 (PST) From: Caleb Connolly To: caleb.connolly@linaro.org, Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Andy Gross , Bjorn Andersson , Lee Jones , Stephen Boyd , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: sumit.semwal@linaro.org, amit.pundir@linaro.org, john.stultz@linaro.org Subject: [PATCH v10 8/9] arm64: dts: qcom: sdm845-db845c: enable rradc Date: Sat, 5 Mar 2022 02:12:46 +0000 Message-Id: <20220305021247.1020122-9-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220305021247.1020122-1-caleb.connolly@linaro.org> References: <20220305021247.1020122-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Enable the Round Robin ADC for the db845c. Signed-off-by: Caleb Connolly --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 13f80a0b6faa..1c452b458121 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -595,6 +595,10 @@ resin { }; }; +&pmi8998_rradc { + status = "okay"; +}; + /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { qi2s@22 { From patchwork Sat Mar 5 02:12:47 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 548587 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id BAFC4C3527A for ; Sat, 5 Mar 2022 02:13:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230440AbiCECOA (ORCPT ); Fri, 4 Mar 2022 21:14:00 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52098 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230458AbiCECN7 (ORCPT ); Fri, 4 Mar 2022 21:13:59 -0500 Received: from mail-wr1-x432.google.com (mail-wr1-x432.google.com [IPv6:2a00:1450:4864:20::432]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 70EA91CABC9 for ; Fri, 4 Mar 2022 18:13:10 -0800 (PST) Received: by mail-wr1-x432.google.com with SMTP id i8so15050304wrr.8 for ; Fri, 04 Mar 2022 18:13:10 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=60je+LDflCDSpm+PbhIAk73PJa9MombVHWRyiPaaQWE=; b=oZP7Y8BCenpOvDiNDIejqZ2+Oiwb3gcNaTTt4yUlgFJrl4z1h80ueXByvgkH6DK5+8 JK2vvMSdJvs5SW7OkGwvR3FciamC3QkVNMojox6malZah0PIBD5eYyLjjtPkpSWXirVu mY6zw64VUdmqC2M6AusCC7jg9ZAcjTa3aD1XaXN6QrLduZ468xgQH2xdAdPGHj4xHbq8 EZ4P+LxHzKdzpLE3G8RUcivBJe1H3CJyjz5GapORZD98yiqho2+8C4xaDiRH5GozS8g9 9QqHKkrChpU1GpBl2lBgvAERyGPeUWa4TrrWtdHKUSB/f6xov79gviI8rSNkwZforRrl f9jg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=60je+LDflCDSpm+PbhIAk73PJa9MombVHWRyiPaaQWE=; b=SV9taHwHahpJ4s/+7TWt/Pp6t8dyyyudE5TbHexOudNSdaQ+JY9KLdBJvLhdB99UHr ySVqWwxXGFbl0WVgLs9oMXqsxYN0qwaO9mh5lJdZC/w054fdqFTXYsIElh5V4yq/NgxR gqXe5dq5OKBLAxhtNk3sQwKtW3mEDngpy8QwNh7uiVV8M1PLWzTIUXLpS3Upr7KjYg57 ke6c0rL92Dsccz1PGVKOeIZFMOlSgbZj+Q4OkZj6+0ZpNhTHFJozveIB59yWXlQ/eTji KkhnFc/PbvYMfQ3uZdrRRv8ex8ikkC//8MeRk5uuUNr09ELXHHziBJB5rJfBDwl9k5kP WovA== X-Gm-Message-State: AOAM533W+NCwxNe4UMRHzuLeBjRVr/6WrnBN8r436IfHQexclOoaQWq1 991M0HHXZmSh2N/3urv7Ukzb8Q== X-Google-Smtp-Source: ABdhPJykeiGO6n1aVMnx6rvjSem+cym+AkUbQgSyScynDN5hc9AaZMa/+MG+IcKBjUQM9NSRL2Ptlw== X-Received: by 2002:a05:6000:1847:b0:1e6:2783:b3e6 with SMTP id c7-20020a056000184700b001e62783b3e6mr969030wri.163.1646446388961; Fri, 04 Mar 2022 18:13:08 -0800 (PST) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id k10-20020adfe3ca000000b001f0329ba94csm7932589wrm.18.2022.03.04.18.13.08 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 04 Mar 2022 18:13:08 -0800 (PST) From: Caleb Connolly To: caleb.connolly@linaro.org, Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Andy Gross , Bjorn Andersson , Lee Jones , Stephen Boyd , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: sumit.semwal@linaro.org, amit.pundir@linaro.org, john.stultz@linaro.org Subject: [PATCH v10 9/9] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable rradc Date: Sat, 5 Mar 2022 02:12:47 +0000 Message-Id: <20220305021247.1020122-10-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220305021247.1020122-1-caleb.connolly@linaro.org> References: <20220305021247.1020122-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Enable the PMI8998 RRADC. Signed-off-by: Caleb Connolly --- arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index 367389526b41..b3b6aa4e0fa3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -312,6 +312,10 @@ resin { }; }; +&pmi8998_rradc { + status = "okay"; +}; + /* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */ &q6afedai { qi2s@22 {