From patchwork Fri Dec 9 02:06:08 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Doug Anderson X-Patchwork-Id: 632735 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9655EC4332F for ; Fri, 9 Dec 2022 02:06:33 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229888AbiLICGb (ORCPT ); Thu, 8 Dec 2022 21:06:31 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36442 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230100AbiLICG3 (ORCPT ); Thu, 8 Dec 2022 21:06:29 -0500 Received: from mail-pl1-x633.google.com (mail-pl1-x633.google.com [IPv6:2607:f8b0:4864:20::633]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6CBA87D07E for ; Thu, 8 Dec 2022 18:06:28 -0800 (PST) Received: by mail-pl1-x633.google.com with SMTP id s7so3391968plk.5 for ; Thu, 08 Dec 2022 18:06:28 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=M88P4SMh5VCPJCyuLc/w2B8fWJUsM71IvdRT7VAjmHQ=; b=XIV9gS7alHxSUtR0tKaSg1ZlTvjuvanMhkxu9gP+QpjiM2dNoCFBdqxhXqHxm0gQxK fiG35WMYsI4gJmDpVdNgZQIe+pWpRzesNMP0PihtGP8T7c2YYBxNcXh1lAAHS87CMrD3 naYNadu9ysQ3fHsQ1mFE0avh4w5DRqRtW5ZYY= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=M88P4SMh5VCPJCyuLc/w2B8fWJUsM71IvdRT7VAjmHQ=; b=Zzixf/oqXSLUAG/rX6xr8Bwbv+5L++UPMN4z5b2SVE+DuAMYuXQ/2+RiUa8GGGzvJV sUZQ4zYdfhZ86Jzc6ok0igPyWKBFXLk4aKPECdqgohYJrHG6JM+R0r8ADU2PiCdmBNkJ 6B6ch1J14lVr0gC5uvJ9EVPNjBQ87XYQTYoj/rNLk3MLXb/Y88DKEwW7oFRnULWtdvyC spZ48zj0MG9UAF8PVHoRNNP8W0PdicL9R5H7b86eBuXq6en2pNZNmu2rH0W3lN4q0TsT uFqFrR+MF7pZ4MPkrIp3cdE6zQCZbzaJ4CiWFh1HfbcLMcKfw9msaYp/FKrJY3SY0QvS VZ6g== X-Gm-Message-State: ANoB5pnYCRO+1FXVyWhD0Bk1xiOkL+sM08WT/gHwOmySY3USKm700Kdl eIk83Si7+9ju51xn5ir7UxeVUA== X-Google-Smtp-Source: AA0mqf7krx9sgecPRwfwbatLdx7a2LUAZpwNfCjIW4cK+SLxXzqoatENDBySUKpqsRQPnNfvmPf3cQ== X-Received: by 2002:a17:90a:f614:b0:218:87cf:1bed with SMTP id bw20-20020a17090af61400b0021887cf1bedmr4772786pjb.2.1670551587920; Thu, 08 Dec 2022 18:06:27 -0800 (PST) Received: from tictac2.mtv.corp.google.com ([2620:15c:9d:2:9a82:7898:7bf4:b4f]) by smtp.gmail.com with ESMTPSA id h3-20020a17090a648300b00218ddc8048bsm233473pjj.34.2022.12.08.18.06.26 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 08 Dec 2022 18:06:27 -0800 (PST) From: Douglas Anderson To: Bjorn Andersson , Dmitry Torokhov Cc: linux-arm-msm@vger.kernel.org, mka@chromium.org, Yunlong Jia , Konrad Dybcio , linux-input@vger.kernel.org, swboyd@chromium.org, Douglas Anderson , Andy Gross , Krzysztof Kozlowski , Rob Herring , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 1/5] arm64: dts: qcom: sc7180: Bump up trogdor ts_reset_l drive strength Date: Thu, 8 Dec 2022 18:06:08 -0800 Message-Id: <20221208180603.v2.1.I39c387f1e3176fcf340039ec12d54047de9f8526@changeid> X-Mailer: git-send-email 2.39.0.rc1.256.g54fd8350bd-goog In-Reply-To: <20221209020612.1303267-1-dianders@chromium.org> References: <20221209020612.1303267-1-dianders@chromium.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org On at least one board (pazquel360) the reset line for the touchscreen was scoped and found to take almost 2 ms to fall when we drove it low. This wasn't great because the Linux driver for the touchscreen (the elants_i2c driver) thinks it can do a 500 us reset pulse. If we bump the drive strength to 8 mA then the reset line went down in ~421 us. NOTE: we could apply this fix just for pazquel360, but: * Probably other trogdor devices have similar timings and it's just that nobody has noticed it before. * There are other trogdor boards using the same elan driver that tries to do 500 us reset pulses. * Bumping the drive strength to 8mA across the board won't hurt. This isn't a high speed signal or anything. Signed-off-by: Douglas Anderson Reviewed-by: Matthias Kaehlcke --- (no changes since v1) arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index f1defb94d670..ff1c7aa6a722 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -1376,7 +1376,15 @@ ts_reset_l: ts-reset-l-state { pins = "gpio8"; function = "gpio"; bias-disable; - drive-strength = <2>; + + /* + * The reset GPIO to the touchscreen takes almost 2ms to drop + * at the default drive strength. When we bump it up to 8mA it + * falls in under 500us. We want this to be fast since the Elan + * datasheet (and any drivers written based on it) talk about using + * a 500 us reset pulse. + */ + drive-strength = <8>; }; sdc1_on: sdc1-on-state { From patchwork Fri Dec 9 02:06:09 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Doug Anderson X-Patchwork-Id: 633001 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7FF64C001B2 for ; Fri, 9 Dec 2022 02:06:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229983AbiLICGc (ORCPT ); Thu, 8 Dec 2022 21:06:32 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36436 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230085AbiLICGa (ORCPT ); Thu, 8 Dec 2022 21:06:30 -0500 Received: from mail-pj1-x102f.google.com (mail-pj1-x102f.google.com [IPv6:2607:f8b0:4864:20::102f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DC4417D096 for ; Thu, 8 Dec 2022 18:06:29 -0800 (PST) Received: by mail-pj1-x102f.google.com with SMTP id 3-20020a17090a098300b00219041dcbe9so3452495pjo.3 for ; Thu, 08 Dec 2022 18:06:29 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=VheF3QaaF2exP1BBRM3nf5LuJc1NkNdCQqtMnYJ/9kg=; b=JhH5QWI4fDvw6CK0ooJ1jAUGCVa2TJ2L4YPH3WJ33TpDW1aNUQy6OBN6UDsX7k3vSW hb85z+ffV5H2emu8I+9J0FKxNDC5dhJkEZz+dYfWyzhXjDrxyFPQcAzz/SqZLag6rv0u JhET5YQSpY9ESn3sIh1jLQFEzrCcTCfJZpPpg= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=VheF3QaaF2exP1BBRM3nf5LuJc1NkNdCQqtMnYJ/9kg=; b=M/scm8xgFblIjao4Bshby+iXuAIujdDhvEjocPDTA/BWG93s0vt5tuKKoWA5kkjZ7V cYxC8xgtSDMALGlBlFbX0i69yeHwvHeeiYelR5K58XBYcZFugXOvMaJUWqfJBZpd7o0B OGaWrOF2COxU0oVBAoYBKAdTxyvlnXZhvDleQ6rcVaDzCn+6IvJ3HQoE4zexVyte5sYB Q7tnhkw0H8J6xPE0aEWaCcv52Ozwd5aAXj//8rZ4WC+1ehmuMUZAi4x7Be70MLR74Teb EoSB9QRq1LRUaQgDDLVpoa0PvAuY03MG1LFSy0gizQKTJI2qMzZU2ephziHhEoRdRmWq U6bQ== X-Gm-Message-State: ANoB5pnHjwL6oXUwTwBoemsIij76uPs6nyYSlGvzpva84eNLZTp1Bqq2 aYuOcH9LganofDIPJkd7ItPGwg== X-Google-Smtp-Source: AA0mqf5ZPcXEMtKwPfze121M3Bof+c5ifljUBFjVB9NrSrfEF7Mjl8XKULe5dHHXKGLGmF8zfOEfyQ== X-Received: by 2002:a05:6a21:2d8b:b0:a0:462f:8e3e with SMTP id ty11-20020a056a212d8b00b000a0462f8e3emr5900754pzb.55.1670551589597; Thu, 08 Dec 2022 18:06:29 -0800 (PST) Received: from tictac2.mtv.corp.google.com ([2620:15c:9d:2:9a82:7898:7bf4:b4f]) by smtp.gmail.com with ESMTPSA id h3-20020a17090a648300b00218ddc8048bsm233473pjj.34.2022.12.08.18.06.28 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 08 Dec 2022 18:06:29 -0800 (PST) From: Douglas Anderson To: Bjorn Andersson , Dmitry Torokhov Cc: linux-arm-msm@vger.kernel.org, mka@chromium.org, Yunlong Jia , Konrad Dybcio , linux-input@vger.kernel.org, swboyd@chromium.org, Douglas Anderson , Andy Gross , Krzysztof Kozlowski , Rob Herring , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/5] arm64: dts: qcom: sc7180: Add trogdor eDP/touchscreen regulator off-on-time Date: Thu, 8 Dec 2022 18:06:09 -0800 Message-Id: <20221208180603.v2.2.I65ac577411b017eff50e7a4fda254e5583ccdc48@changeid> X-Mailer: git-send-email 2.39.0.rc1.256.g54fd8350bd-goog In-Reply-To: <20221209020612.1303267-1-dianders@chromium.org> References: <20221209020612.1303267-1-dianders@chromium.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org In general, the timing diagrams for components specify a minimum time for power cycling the component. When we remove power from a device we need to let the device fully discharge and get to a quiescent state before applying power again. If we power a device on too soon then it might not have fully powered off and might be in a weird in-between / invalid state. eDP panels typically have a time that's at least 500 ms here. You can see that in Linux's panel-edp driver nearly every device specifies a "unprepare" time of at least 500 ms. This is a common minimum and the 500 ms is even in the example in the eDP spec. In Linux, the "panel-edp" driver enforces this delay for its own control of the regulator, but the "panel-edp" driver can't do anything about other control of the regulator (for instance, by the touchpanel driver). Let's add 500 ms as a board constraint for the regulator that's used for eDP/touchpanel on trogdor boards. If a given trogdor board stuffs only panels that can use a shorter time or stuff some panels that need a larger time then they can manually adjust this timing. We'll only do this minimum delay for trogdor devices with eDP (ones that use either bridge chip), not for devices with MIPI panels. MIPI panels could have similar constraints but the 500 ms isn't necessarily as standard and there are no known cases where this delay is needed. For most trogdor boards, this doesn't actually seem to affect anything when testing against shipping Linux. However, with pazqel360 it seems that this does make a difference. It seems that the touchscreen on this board _also_ needs some time for the regulator to discharge. That time is much less than 500 ms, so we'll just put the eDP panel 500 ms in there since the board constraint should be the "max" of the components. Signed-off-by: Douglas Anderson Reviewed-by: Matthias Kaehlcke --- Changes in v2: - Fix typo in commit message (Matthias) .../boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi | 12 ++++++++++++ .../boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 12 ++++++++++++ 2 files changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi index ebd6765e2afa..e27a769f8cd4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -26,6 +26,18 @@ pp3300_brij_ps8640: pp3300-brij-ps8640-regulator { }; }; +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_dx_edp { + off-on-delay-us = <500000>; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + &dsi0_out { remote-endpoint = <&ps8640_in>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi index 65333709e529..3188788306d0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -7,6 +7,18 @@ #include +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_dx_edp { + off-on-delay-us = <500000>; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + &dsi0_out { remote-endpoint = <&sn65dsi86_in>; }; From patchwork Fri Dec 9 02:06:10 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Doug Anderson X-Patchwork-Id: 632734 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id EE950C10F1D for ; Fri, 9 Dec 2022 02:06:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230116AbiLICGe (ORCPT ); Thu, 8 Dec 2022 21:06:34 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36506 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229631AbiLICGc (ORCPT ); Thu, 8 Dec 2022 21:06:32 -0500 Received: from mail-pl1-x631.google.com (mail-pl1-x631.google.com [IPv6:2607:f8b0:4864:20::631]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CE5D9944F3 for ; Thu, 8 Dec 2022 18:06:31 -0800 (PST) Received: by mail-pl1-x631.google.com with SMTP id k7so3384797pll.6 for ; Thu, 08 Dec 2022 18:06:31 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=O0omoS8MV63r00CQ4nuB53paFZYXNiG9HsPf+U2WQ9E=; b=O4yy6UsxnWqGe50OUXK/YusUbzxacCc+N5R9BOXPdal/QmHY1KoPpyZctKQLKDv0ak MptSgrP4NdoW4dHXcnnvPBYuym7kvA3eWaJ4mYZRA2SJpD6izPHnjseMkvsn/kEZ04Hz cfhvD39RtRENpEb5HAg0O0mLSi/ZUKvxYYYMU= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=O0omoS8MV63r00CQ4nuB53paFZYXNiG9HsPf+U2WQ9E=; b=K36kVcMePMlVdgMYZOr6UIuRa1wRI9PZzvovWF4cRTxaLn/XeqqgBC2c0FmbODcFDF mLN1mRYDcMmazm91AXJ+ONlkQKNe27jRQCdLudt3Q0U93DLDvq+ezkE3zb2YCZlmOSgu 6vyit9JnlaENkmjWXdeQXYLR6rXmZn3VF55vDLymTy7AGRt2Fzcu5jNjDH5bmmfuUXzP 7XFcUgjTFT/K0/v8hiG/+VPLN2n2/rGuBvAo1Nv19MZPmrvnKmrTd8moDMLZCHETnxrH I2yi/xi7RKHu1ZZ0+FXaTi853McqqMGh6MQnO1NavCL85MB37wuPYDZmXALmD22EM7// LrFw== X-Gm-Message-State: ANoB5pl/8/78D1z15uI/IAw8NHtWmHpg0wj8tOINu8MJ+C/HsfnRLWp6 QfPOJ5Dh7q1IViEOSlbAgCBP5Q== X-Google-Smtp-Source: AA0mqf64PcrLWIDFYeS/Kz+OWZHuGTsz4ytUjwNxhf1DM0bLkNvNuYQBcOrll7VfVp2FVwLXX3/ZHg== X-Received: by 2002:a05:6a20:d903:b0:a3:9dd1:6d38 with SMTP id jd3-20020a056a20d90300b000a39dd16d38mr5453853pzb.25.1670551591279; Thu, 08 Dec 2022 18:06:31 -0800 (PST) Received: from tictac2.mtv.corp.google.com ([2620:15c:9d:2:9a82:7898:7bf4:b4f]) by smtp.gmail.com with ESMTPSA id h3-20020a17090a648300b00218ddc8048bsm233473pjj.34.2022.12.08.18.06.29 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 08 Dec 2022 18:06:30 -0800 (PST) From: Douglas Anderson To: Bjorn Andersson , Dmitry Torokhov Cc: linux-arm-msm@vger.kernel.org, mka@chromium.org, Yunlong Jia , Konrad Dybcio , linux-input@vger.kernel.org, swboyd@chromium.org, Douglas Anderson , Andy Gross , Krzysztof Kozlowski , Rob Herring , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 3/5] arm64: dts: qcom: sc7180: Start the trogdor eDP/touchscreen regulator on Date: Thu, 8 Dec 2022 18:06:10 -0800 Message-Id: <20221208180603.v2.3.I7050a61ba3a48e44b86053f265265b5e3c0cee31@changeid> X-Mailer: git-send-email 2.39.0.rc1.256.g54fd8350bd-goog In-Reply-To: <20221209020612.1303267-1-dianders@chromium.org> References: <20221209020612.1303267-1-dianders@chromium.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Now that we've added the `off-on-delay-us` for the touchpanel regulator, we can see that we're actually hitting that delay at bootup. I saw about 200 ms of delay. Let's avoid that delay by starting the regulator on. We'll only do this for eDP devices for the time being. NOTE: we _won't_ do this for homestar. Homestar's panel really likes to be power cycled. It's why the Linux driver for this panel has a pm_runtime_put_sync_suspend() when the panel is being unprepared but the normal panel-edp driver doesn't. It's also why this hardware has a separate power rail for eDP vs. touchscreen, unlike all the other trogdor boards. We won't start homestar's regulator on. While this could mean a slight delay on homestar, it is probably a _correct_ delay. The bootloader might have left the regulator on (it does so in dev and recovery modes), so if we turned the regulator off at probe time and we actually hit the delay then we were probably violating T12 in the panel spec. Signed-off-by: Douglas Anderson Reviewed-by: Matthias Kaehlcke --- (no changes since v1) .../boot/dts/qcom/sc7180-trogdor-homestar.dtsi | 18 ++++++++++++++++++ .../dts/qcom/sc7180-trogdor-parade-ps8640.dtsi | 8 ++++++++ .../dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 8 ++++++++ 3 files changed, 34 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index d3cf64c16dcd..b3ba23a88a0b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -85,6 +85,24 @@ map1 { }; }; +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_dx_edp { + /* + * The atna33xc20 really likes to be power cycled to keep it from + * getting in a bad state. This is the reason that the touchscreen + * rail and eDP rails are separate from each other on homestar (but + * not other trogdor devices) Make sure it starts "off" at bootup. + */ + /delete-property/ regulator-boot-on; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi index e27a769f8cd4..5aa7949b5328 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -34,6 +34,14 @@ pp3300_brij_ps8640: pp3300-brij-ps8640-regulator { &pp3300_dx_edp { off-on-delay-us = <500000>; + + /* + * It's nicer to start with this regulator enabled. The + * bootloader may have left it on and it's nice not to cause an + * extra power cycle of the touchscreen and eDP panel at bootup. + * This should help speed bootup because we have off-on-delay-us. + */ + regulator-boot-on; }; /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi index 3188788306d0..e52b8776755d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -15,6 +15,14 @@ &pp3300_dx_edp { off-on-delay-us = <500000>; + + /* + * It's nicer to start with this regulator enabled. The + * bootloader may have left it on and it's nice not to cause an + * extra power cycle of the touchscreen and eDP panel at bootup. + * This should help speed bootup because we have off-on-delay-us. + */ + regulator-boot-on; }; /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ From patchwork Fri Dec 9 02:06:11 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Doug Anderson X-Patchwork-Id: 633000 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C9270C4332F for ; Fri, 9 Dec 2022 02:06:50 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230128AbiLICGt (ORCPT ); Thu, 8 Dec 2022 21:06:49 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36554 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229615AbiLICGe (ORCPT ); Thu, 8 Dec 2022 21:06:34 -0500 Received: from mail-pj1-x1036.google.com (mail-pj1-x1036.google.com [IPv6:2607:f8b0:4864:20::1036]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 63F9799F2F for ; Thu, 8 Dec 2022 18:06:33 -0800 (PST) Received: by mail-pj1-x1036.google.com with SMTP id q17-20020a17090aa01100b002194cba32e9so6595647pjp.1 for ; Thu, 08 Dec 2022 18:06:33 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=riB7LtyZ0lleKlmY9G6ocrA6pcHo/IAGW1ay3iZp0eQ=; b=X+JYtgj8sgUEsF7jToHxDCYTMglL0aIOZ4+loh9W8HStvg47PVkIykK/WViQN8qXBK GjYQ508/LrXK1k0wxNZCEu3/JqnBdZOnrAFBorD3+i/CA07NkAFrocN78evZiRColHr5 uftETNCdoUP898da50ms6V//mnUDPs9xOTcmU= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=riB7LtyZ0lleKlmY9G6ocrA6pcHo/IAGW1ay3iZp0eQ=; b=wUNsheiiyjMTw+L+z96ioQN8FA56ZE9QMd5pL6+ClzaPw6f3uOP0j0D0pgB96rYIix pdh9R9q0Re/ZrUBkx5w8i0v7bVNd96HZoLBecSFTATaUnL7jyEk2KMAONuULX3AIOIfM aLdgA8L8lusKraAzwtd0oCgmMrr9NQY5epgJRg+CNcDd4+D4GIhWrRScgod44tk21r8S n00gxA1HIkZSE3KindnvUS62fMivWieC4nVHeukmdiaq7LzXP2v7SD75OIOAi53GEmLW KsFd3f/+v/EUb+Pw/sSLfxtFhfCiLsWvDz9Et4xk+FmijzViLbu8dqI4Y0BXg2mHHxnS CPwg== X-Gm-Message-State: ANoB5pndySVqt83MHbUd3pgOcsXM74XT72X0qThPyUy58YXapfvJCt9O ih9d8+BrnlauryhfjLU8dzSA7Q== X-Google-Smtp-Source: AA0mqf5e81mya60xEl8F+ZSr8VdEDiUyt7BQLEsWUnydTPCssdcQFKXLZ9EuWMLf5QY19GrOyKTGFw== X-Received: by 2002:a17:90a:199b:b0:218:72de:1f77 with SMTP id 27-20020a17090a199b00b0021872de1f77mr4054831pji.6.1670551592946; Thu, 08 Dec 2022 18:06:32 -0800 (PST) Received: from tictac2.mtv.corp.google.com ([2620:15c:9d:2:9a82:7898:7bf4:b4f]) by smtp.gmail.com with ESMTPSA id h3-20020a17090a648300b00218ddc8048bsm233473pjj.34.2022.12.08.18.06.31 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 08 Dec 2022 18:06:32 -0800 (PST) From: Douglas Anderson To: Bjorn Andersson , Dmitry Torokhov Cc: linux-arm-msm@vger.kernel.org, mka@chromium.org, Yunlong Jia , Konrad Dybcio , linux-input@vger.kernel.org, swboyd@chromium.org, Douglas Anderson , Andy Gross , Krzysztof Kozlowski , Rob Herring , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 4/5] arm64: dts: qcom: sc7180: Add pazquel360 touschreen Date: Thu, 8 Dec 2022 18:06:11 -0800 Message-Id: <20221208180603.v2.4.Id132522bda31fd97684cb076a44a0907cd28097d@changeid> X-Mailer: git-send-email 2.39.0.rc1.256.g54fd8350bd-goog In-Reply-To: <20221209020612.1303267-1-dianders@chromium.org> References: <20221209020612.1303267-1-dianders@chromium.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org The touchscreen was supposed to have been added when pazquel360 first was added upstream but was missed. Add it now. Signed-off-by: Douglas Anderson Reviewed-by: Matthias Kaehlcke --- (no changes since v1) .../dts/qcom/sc7180-trogdor-pazquel360.dtsi | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi index 5702325d0c7b..54b89def8402 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi @@ -14,6 +14,27 @@ &alc5682 { realtek,dmic-clk-rate-hz = <2048000>; }; +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth3915", "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x0001>; + + vcc33-supply = <&pp3300_ts>; + vccio-supply = <&pp1800_l10a>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + &keyboard_controller { function-row-physmap = < MATRIX_KEY(0x00, 0x02, 0) /* T1 */ From patchwork Fri Dec 9 02:06:12 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Doug Anderson X-Patchwork-Id: 632733 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 68083C001B2 for ; Fri, 9 Dec 2022 02:07:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230060AbiLICHC (ORCPT ); Thu, 8 Dec 2022 21:07:02 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36550 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229795AbiLICGi (ORCPT ); Thu, 8 Dec 2022 21:06:38 -0500 Received: from mail-pj1-x1032.google.com (mail-pj1-x1032.google.com [IPv6:2607:f8b0:4864:20::1032]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 03476A0F91 for ; Thu, 8 Dec 2022 18:06:35 -0800 (PST) Received: by mail-pj1-x1032.google.com with SMTP id js9so2348524pjb.2 for ; Thu, 08 Dec 2022 18:06:34 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=EYHKt7eErryFsunPtjvbbKSRjv/mzx815uk+wD/pTQA=; b=d49/UoZlVE5w3d9YzUdP39J9v1X4sYnfWRYbfkz4kRMG3f3MBGnFZoF8oeyfpj09BG cFP+PcSftvmWByGj00bsk6B8QOC0edfwZ/94cvliN5dhM3a6QtVOi6KQzImXE4Xu1ie/ gkorIwsbpNx6+8bg3nBEGTwD/wgAQHl4nCDkE= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=EYHKt7eErryFsunPtjvbbKSRjv/mzx815uk+wD/pTQA=; b=RN16JGiqXbqwimOigZDSpPmdm2CQnQGVi8JJPOBF73vACX1mbRLQy74+rc4DOAU8wu FgWVF8LjiKpexAlyghldiWLNKm/NI5HI2vwa29nosRf3N4IdBaN3rxWndh+ZRrjelhUw gkmoK11jxK8hL5NX/+EtC/0O2orxL3og62m8yVFm6HWd9mkhlRzhWUCnDpzoT6/M+4vI cvTV4LvX9wHbCS3TW2aBOausN7rkm9TAK2+Y1YfKDvn3pGmupau2foMuEMcV3AhfNiUf eEBbkrZE/JQvG3xuZscNYRYEYNwhGyWFHSo2ecqMJzzswV1QrDBBPmbiWYaOSSwYXAbs NB8Q== X-Gm-Message-State: ANoB5pnAbpJDuYtE9/iJxl7y78x2ZIkIOzkukeFf6FRpYntBG2SyMTRS vVi9xaVWO8O1c8KQCyDZfBZXBg== X-Google-Smtp-Source: AA0mqf7uDUzumlQz01jBVxnxyEVFcy0Yo5fQx0dH1g79MUe7PgisOwmPsSg6vsxK4/zwUphVR1W31w== X-Received: by 2002:a17:90a:5281:b0:212:f0fe:bb45 with SMTP id w1-20020a17090a528100b00212f0febb45mr4080802pjh.40.1670551594503; Thu, 08 Dec 2022 18:06:34 -0800 (PST) Received: from tictac2.mtv.corp.google.com ([2620:15c:9d:2:9a82:7898:7bf4:b4f]) by smtp.gmail.com with ESMTPSA id h3-20020a17090a648300b00218ddc8048bsm233473pjj.34.2022.12.08.18.06.33 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 08 Dec 2022 18:06:34 -0800 (PST) From: Douglas Anderson To: Bjorn Andersson , Dmitry Torokhov Cc: linux-arm-msm@vger.kernel.org, mka@chromium.org, Yunlong Jia , Konrad Dybcio , linux-input@vger.kernel.org, swboyd@chromium.org, Douglas Anderson , Johnny Chuang , linux-kernel@vger.kernel.org Subject: [PATCH v2 5/5] Input: elants_i2c: Delay longer with reset asserted Date: Thu, 8 Dec 2022 18:06:12 -0800 Message-Id: <20221208180603.v2.5.I6edfb3f459662c041563a54e5b7df727c27caaba@changeid> X-Mailer: git-send-email 2.39.0.rc1.256.g54fd8350bd-goog In-Reply-To: <20221209020612.1303267-1-dianders@chromium.org> References: <20221209020612.1303267-1-dianders@chromium.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org The elan touchscreen datasheet says that the reset GPIO only needs to be asserted for 500us in order to reset the regulator. The problem is that some boards need a level shifter between the signals on the GPIO controller and the signals on the touchscreen. All of these extra components on the line can slow the transition of the signals. On one board, we measured the reset line and saw that it took almost 1.8ms to go low. Even after we bumped up the "drive strength" of the signal from the default 2mA to 8mA we still saw it take 421us for the signal to go low. In order to account for this let's lengthen the amount of time that we keep the reset asserted. Let's bump it up from 500us to 5000us. That's still a relatively short amount of time and is much safer. It should be noted that this fixes real problems. Case in point: 1. The touchscreen power rail may be shared with another device (like an eDP panel). That means that at probe time power might already be on. 2. In probe we grab the reset GPIO and assert it (make it low). 3. We turn on power (a noop since it was already on). 4. We wait 500us. 5. We deassert the reset GPIO. With the above case and only a 500us delay we saw only a partial reset asserted, which is bad. Giving it 5ms is overkill but feels safer in case someone else has a different level shifter setup. Note that bumping up the delay to 5000 means that some configs yell about using udelay(). We'll change to using usleep_range(). We give a small range here because: - This isn't a delay that happens very often so we don't need to worry about giving a big range to allow for power efficiency. - usleep_range() is known to almost always pick the upper bound and delay that long and we really don't want to slow down the power on of the touchscreen that much. Signed-off-by: Douglas Anderson Reviewed-by: Matthias Kaehlcke --- Changes in v2: - Fix typo in commit message (Matthias) - udelay -> usleep_range (Patches Robot, Dmitry) drivers/input/touchscreen/elants_i2c.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 879a4d984c90..192d543e5aa9 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -114,7 +114,7 @@ /* calibration timeout definition */ #define ELAN_CALI_TIMEOUT_MSEC 12000 -#define ELAN_POWERON_DELAY_USEC 500 +#define ELAN_POWERON_DELAY_USEC 5000 #define ELAN_RESET_DELAY_MSEC 20 /* FW boot code version */ @@ -1352,7 +1352,7 @@ static int elants_i2c_power_on(struct elants_data *ts) * We need to wait a bit after powering on controller before * we are allowed to release reset GPIO. */ - udelay(ELAN_POWERON_DELAY_USEC); + usleep_range(ELAN_POWERON_DELAY_USEC, ELAN_POWERON_DELAY_USEC + 100); release_reset_gpio: gpiod_set_value_cansleep(ts->reset_gpio, 0);