From patchwork Thu Feb 23 15:36:51 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 656095 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A6BAFC61DA4 for ; Thu, 23 Feb 2023 15:37:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234953AbjBWPhE (ORCPT ); Thu, 23 Feb 2023 10:37:04 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48282 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234916AbjBWPhD (ORCPT ); Thu, 23 Feb 2023 10:37:03 -0500 Received: from mail-wr1-x436.google.com (mail-wr1-x436.google.com [IPv6:2a00:1450:4864:20::436]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E8BD058487 for ; Thu, 23 Feb 2023 07:37:00 -0800 (PST) Received: by mail-wr1-x436.google.com with SMTP id q16so657027wrw.2 for ; Thu, 23 Feb 2023 07:37:00 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=XUvAJiwYybcfxuPaO1uSIiPaY9bXRmDYQO0thKgpZNw=; b=xfyHhN31SYkq+4nWRk+57GWnYNH4MtjAzPqAK2RL19Xj2/8H7kgWWMFsjm5S5f2UGR cMqUqEeei1F6mPBRa5L9/cG7nAX7DAVkKp05ybcHLnkDPhns0sXtLoLlLf7Vs82uZ5W9 VMO5SnzN6+NEgm3uyjvXFoQLUIXu6fY3UNEeHTZcVU6XlQ+ob77itTyqgTUy3+M2nyzA rIuZC2Upcn1TVEg8/dccALdOuVXl/OqJmpBio9FYVxpRl+rMTCOA14Qv6yVtmw2aCV94 kUu8gME6ZvThAFA73hduYFxwXRwaJxKO4ceWQCRnS6DRJgcBaInJrdUuAz7kIBJuITnt LgyA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=XUvAJiwYybcfxuPaO1uSIiPaY9bXRmDYQO0thKgpZNw=; b=VmA7xniWwUFKPHTfNmrtK3VJkusKZSloM1cSUXUlvR3rYuT5Oodi9PNE/glbpaofTd z3MgjRZ0AKVblzh05ccuNk8/JtDPvYlSkvnhqC5iVAJ2h9Xz8ianqNtq0Eag7BXutAHd V2Ex6fVM+4HXmUVGLGexo6fbJzLsITUYVoBZSjWuEtfedKU2jV4s3cph5QKPDpmQFZD9 iupAV9usTpLb/2tYgRjPDA3UlJ2nPun+IrR8cJSee6Oo0Vck7OEmvD3MPfmxRZ+GoZJt g7gGCld7SfwgWXPt9N0quXxC/5ycZ8kZEJxK87xNYF+yybnrGLj2TpEQhHroTY6noQ3K snuA== X-Gm-Message-State: AO0yUKXMTreKO8MXOaM7QowMhQ5h5o9hFXPG3Bb8J0x0ET1NAtdjcK2v b5PFf8oxG9wYRRJ/vU9G1JOGXA== X-Google-Smtp-Source: AK7set8dR4zzoxnEnLUoJZ/nmlb/gM+R8h1iDGx7inK3P4oMolEEoBuEdlXd4lOg7kcx2jMKdobr8w== X-Received: by 2002:adf:ce0b:0:b0:2c6:e827:21c1 with SMTP id p11-20020adfce0b000000b002c6e82721c1mr9365669wrn.50.1677166619227; Thu, 23 Feb 2023 07:36:59 -0800 (PST) Received: from sagittarius-a.chello.ie (188-141-3-169.dynamic.upc.ie. [188.141.3.169]) by smtp.gmail.com with ESMTPSA id c18-20020a05600c0a5200b003e733a973d2sm11076978wmq.39.2023.02.23.07.36.58 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 23 Feb 2023 07:36:58 -0800 (PST) From: Bryan O'Donoghue To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, djakov@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: bryan.odonoghue@linaro.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, benl@squareup.com, shawn.guo@linaro.org, fabien.parent@linaro.org, leo.yan@linaro.org, dmitry.baryshkov@linaro.org, stephan@gerhold.net, Krzysztof Kozlowski Subject: [PATCH v7 1/5] dt-bindings: vendor-prefixes: Add Square Date: Thu, 23 Feb 2023 15:36:51 +0000 Message-Id: <20230223153655.262783-2-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230223153655.262783-1-bryan.odonoghue@linaro.org> References: <20230223153655.262783-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add vendor prefix for Square (https://squareup.com). Acked-by: Krzysztof Kozlowski Signed-off-by: Bryan O'Donoghue --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index ed64e06ecca49..90b746d237d26 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1251,6 +1251,8 @@ patternProperties: description: SpinalHDL "^sprd,.*": description: Spreadtrum Communications Inc. + "^square,.*": + description: Square "^ssi,.*": description: SSI Computer Corp "^sst,.*": From patchwork Thu Feb 23 15:36:52 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 657320 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 86042C64ED8 for ; Thu, 23 Feb 2023 15:37:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234981AbjBWPhR (ORCPT ); Thu, 23 Feb 2023 10:37:17 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48522 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234938AbjBWPhJ (ORCPT ); Thu, 23 Feb 2023 10:37:09 -0500 Received: from mail-wm1-x32e.google.com (mail-wm1-x32e.google.com [IPv6:2a00:1450:4864:20::32e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8178E58B51 for ; Thu, 23 Feb 2023 07:37:02 -0800 (PST) Received: by mail-wm1-x32e.google.com with SMTP id ay29-20020a05600c1e1d00b003e9f4c2b623so4359913wmb.3 for ; Thu, 23 Feb 2023 07:37:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=5C603bDE6QltbubiPwd4Cm8gcVnYeNcH6sk2qo+sPQw=; b=EVcjtJ159eVtvqkY70jlwLZIUcllXODIdDFveKhppShTvBhcLLDY53jhhwNDAc7bIp 0AxwiJip34KC3CY/FNs0azMC13bLHO+OPyOMCmohhzq+wnBwTwaapCNbRORrELvvSe2M xNp+ci0drQ14NAmJAz4jZNmrdyNMRGiDTQQynCx/2utDLGxMgAhqzpx9/YU1Hq42quqo fz+toJODKhSYARayh4smb1ovCGpsPKYyO761fpPpuQr/i+UQZTpW+mdPKhaOLxtGEbdu EvCRZvBP7nMAzTgvkoII7h0ExBJJecSPwQsXEJVhhwFg7IoQHyhC/fJojSqFYquSUyKC HN9w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=5C603bDE6QltbubiPwd4Cm8gcVnYeNcH6sk2qo+sPQw=; b=b5RdPhXV0oc3of/9lBJrOQLeHIKXmEJ/nrDguKxxK7MZX86M3nz1eSuSd8BU+0E2Az Au+Og2xO4xedz8Mnt3sA2ViAOcsjZ2jZwq3H/ncMVXnxFKQdmaRxLf/2s5clOd40p8Yj mfHZU9eNGM8+vs5Hd8nlsSkuExuNOwEPvWdEidAY2HCVw87tkJKR8c3t9NbYOiM/kD4g QeA6MXRU3ztrS5ome0TbFYA92GrYSH8srxfD36hjmkVBC6TnGXzdsNCDBVyagAOpkWCb RT8KnAeV/0CrOs9AaN7TZq9rOALTDrZM48p5P/P7pO2ZelhKxSNpaa1FvX1UWLC8BSak 1d0g== X-Gm-Message-State: AO0yUKXPzNX0iVsgre9Nl9jLyFeEH/RkFkIospvIRg4IoVwZKb+ojYOL 6+uJ5C6pgvauVK4nsqpZdHuNgw== X-Google-Smtp-Source: AK7set/YNFq2W2ngkzU59+5ReFC8jyauIv64ILJVR2APUZ+0QgsoNyiQNQydYfW2/YriF/mUVECN1Q== X-Received: by 2002:a05:600c:30ca:b0:3dc:2af8:83c0 with SMTP id h10-20020a05600c30ca00b003dc2af883c0mr3222837wmn.31.1677166620478; Thu, 23 Feb 2023 07:37:00 -0800 (PST) Received: from sagittarius-a.chello.ie (188-141-3-169.dynamic.upc.ie. [188.141.3.169]) by smtp.gmail.com with ESMTPSA id c18-20020a05600c0a5200b003e733a973d2sm11076978wmq.39.2023.02.23.07.36.59 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 23 Feb 2023 07:37:00 -0800 (PST) From: Bryan O'Donoghue To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, djakov@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: bryan.odonoghue@linaro.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, benl@squareup.com, shawn.guo@linaro.org, fabien.parent@linaro.org, leo.yan@linaro.org, dmitry.baryshkov@linaro.org, stephan@gerhold.net, Jun Nie , James Willcox , Joseph Gates , Max Chen , Zac Crosby , Vincent Knecht Subject: [PATCH v7 2/5] arm64: dts: qcom: Add msm8939 SoC Date: Thu, 23 Feb 2023 15:36:52 +0000 Message-Id: <20230223153655.262783-3-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230223153655.262783-1-bryan.odonoghue@linaro.org> References: <20230223153655.262783-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add msm8939 a derivative SoC of msm8916. This SoC contains a number of key differences to msm8916. - big.LITTLE Octa Core - quad 1.5GHz + quad 1.0GHz - DRAM 1x800 LPDDR3 - Camera 4+4 lane CSI - Venus @ 1080p60 HEVC - DSI x 2 - Adreno A405 - WiFi wcn3660/wcn3680b 802.11ac Co-developed-by: Shawn Guo Signed-off-by: Shawn Guo Co-developed-by: Jun Nie Signed-off-by: Jun Nie Co-developed-by: Benjamin Li Signed-off-by: Benjamin Li Co-developed-by: James Willcox Signed-off-by: James Willcox Co-developed-by: Leo Yan Signed-off-by: Leo Yan Co-developed-by: Joseph Gates Signed-off-by: Joseph Gates Co-developed-by: Max Chen Signed-off-by: Max Chen Co-developed-by: Zac Crosby Signed-off-by: Zac Crosby Co-developed-by: Vincent Knecht Signed-off-by: Vincent Knecht Co-developed-by: Stephan Gerhold Signed-off-by: Stephan Gerhold Signed-off-by: Bryan O'Donoghue --- arch/arm64/boot/dts/qcom/msm8939.dtsi | 2456 +++++++++++++++++++++++++ 1 file changed, 2456 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8939.dtsi diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi new file mode 100644 index 0000000000000..89a93f5e0a93b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -0,0 +1,2456 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + /* + * Stock LK wants address-cells/size-cells = 2 + * A number of our drivers want address/size cells = 1 + * hence the disparity between top-level and /soc below. + */ + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@100 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x100>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@101 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x101>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU2: cpu@102 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x102>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU3: cpu@103 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x103>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU4: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x0>; + qcom,acc = <&acc4>; + qcom,saw = <&saw4>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x1>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc5>; + qcom,saw = <&saw5>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + CPU6: cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x2>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc6>; + qcom,saw = <&saw6>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + CPU7: cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x3>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc7>; + qcom,saw = <&saw7>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + idle-states { + CPU_SLEEP_0: cpu-sleep-0 { + compatible ="qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <130>; + exit-latency-us = <150>; + min-residency-us = <2000>; + local-timer-stop; + }; + }; + }; + + /* + * MSM8939 has a big.LITTLE heterogeneous computing architecture, + * consisting of two clusters of four ARM Cortex-A53s each. The + * LITTLE cluster runs at 1.0-1.2GHz, and the big cluster runs + * at 1.5-1.7GHz. + * + * The enable method used here is spin-table which presupposes use + * of a 2nd stage boot shim such as lk2nd to have installed a + * spin-table, the downstream non-psci/non-spin-table method that + * default msm8916/msm8936/msm8939 will not be supported upstream. + */ + cpu-map { + /* LITTLE (efficiency) cluster */ + cluster0 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + + /* big (performance) cluster */ + /* Boot CPU is cluster 1 core 0 */ + cluster1 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8916", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz-apps@86000000 { + reg = <0x0 0x86000000 0x0 0x300000>; + no-map; + }; + + smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + hypervisor@86400000 { + reg = <0x0 0x86400000 0x0 0x100000>; + no-map; + }; + + tz@86500000 { + reg = <0x0 0x86500000 0x0 0x180000>; + no-map; + }; + + reserved@86680000 { + reg = <0x0 0x86680000 0x0 0x80000>; + no-map; + }; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + + rfsa@867e0000 { + reg = <0x0 0x867e0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: mpss@86800000 { + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + wcnss_mem: wcnss@8bd00000 { + reg = <0x0 0x8bd00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c300000 { + reg = <0x0 0x8c300000 0x0 0x800000>; + no-map; + }; + + mba_mem: mba@8cb00000 { + no-map; + reg = <0x0 0x8cb00000 0x0 0x100000>; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = ; + qcom,ipc = <&apcs1_mbox 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8936"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8939-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; + }; + }; + }; + + smp2p-hexagon { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = ; + + mboxes = <&apcs1_mbox 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + hexagon_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = ; + + mboxes = <&apcs1_mbox 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs1_mbox 8 13>; + qcom,ipc-3 = <&apcs1_mbox 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + rng@22000 { + compatible = "qcom,prng"; + reg = <0x00022000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + qfprom: qfprom@5c000 { + compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; + reg = <0x0005c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_caldata: caldata@a0 { + reg = <0xa0 0x5c>; + }; + + tsens_base1: base1@a0 { + reg = <0xa0 0x1>; + bits = <0 8>; + }; + + tsens_s5_p1: s5-p1@a1 { + reg = <0xa1 0x1>; + bits = <0 6>; + }; + + tsens_s5_p2: s5-p2@a1 { + reg = <0xa1 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1: s6-p1@a2 { + reg = <0xa2 0x2>; + bits = <4 6>; + }; + + tsens_s6_p2: s6-p2@a3 { + reg = <0xa3 0x1>; + bits = <2 6>; + }; + + tsens_s7_p1: s7-p1@a4 { + reg = <0xa4 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2: s7-p2@a4 { + reg = <0xa4 0x2>; + bits = <6 6>; + }; + + tsens_s8_p1: s8-p1@a5 { + reg = <0xa5 0x2>; + bits = <4 6>; + }; + + tsens_s8_p2: s8-p2@a6 { + reg = <0xa6 0x1>; + bits = <2 6>; + }; + + tsens_base2: base2@a7 { + reg = <0xa7 0x1>; + bits = <0 8>; + }; + + tsens_mode: mode@d0 { + reg = <0xd0 0x1>; + bits = <0 3>; + }; + + tsens_s0_p1: s0-p1@d0 { + reg = <0xd0 0x2>; + bits = <3 6>; + }; + + tsens_s0_p2: s0-p1@d1 { + reg = <0xd1 0x1>; + bits = <1 6>; + }; + + tsens_s1_p1: s1-p1@d1 { + reg = <0xd1 0x2>; + bits = <7 6>; + }; + + tsens_s1_p2: s1-p2@d2 { + reg = <0xd2 0x2>; + bits = <5 6>; + }; + + tsens_s2_p1: s2-p1@d3 { + reg = <0xd3 0x2>; + bits = <3 6>; + }; + + tsens_s2_p2: s2-p2@d4 { + reg = <0xd4 0x1>; + bits = <1 6>; + }; + + tsens_s3_p1: s3-p1@d4 { + reg = <0xd4 0x2>; + bits = <7 6>; + }; + + tsens_s3_p2: s3-p2@d5 { + reg = <0xd5 0x2>; + bits = <5 6>; + }; + + tsens_s4_p1: s4-p1@d6 { + reg = <0xd6 0x2>; + bits = <3 6>; + }; + + tsens_s4_p2: s4-p2@d7 { + reg = <0xd7 0x1>; + bits = <1 6>; + }; + }; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + bimc: interconnect@400000 { + compatible = "qcom,msm8939-bimc"; + reg = <0x00400000 0x62000>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + #interconnect-cells = <1>; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,msm8939-tsens", "qcom,tsens-v0_1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2"; + #qcom,sensors = <9>; + interrupts = ; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + + pcnoc: interconnect@500000 { + compatible = "qcom,msm8939-pcnoc"; + reg = <0x00500000 0x11000>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + #interconnect-cells = <1>; + }; + + snoc: interconnect@580000 { + compatible = "qcom,msm8939-snoc"; + reg = <0x00580000 0x14080>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + #interconnect-cells = <1>; + + snoc_mm: interconnect-snoc { + compatible = "qcom,msm8939-snoc-mm"; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>, + <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>; + #interconnect-cells = <1>; + }; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 122>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_uart1_default: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp1_uart2_default: blsp1-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + camera_front_default: camera-front-default-state { + pwdn-pins { + pins = "gpio33"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst-pins { + pins = "gpio28"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + mclk1-pins { + pins = "gpio27"; + function = "cam_mclk1"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera-rear-default-state { + pwdn-pins { + pins = "gpio34"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + mclk0-pins { + pins = "gpio26"; + function = "cam_mclk0"; + drive-strength = <16>; + bias-disable; + }; + }; + + cci0_default: cci0-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + cdc_pdm_lines_default: pdm-lines-default-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <8>; + bias-disable; + }; + + cdc_pdm_lines_sleep: pdm-lines-suspend-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <2>; + bias-pull-down; + }; + + cdc_dmic_lines_act: cdc-dmic-lines-on-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <8>; + }; + + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <8>; + }; + }; + + cdc_dmic_lines_sus: cdc-dmic-lines-off-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <2>; + bias-disable; + }; + + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <2>; + bias-disable; + }; + }; + + ext-mclk-tlmm-lines-state { + ext_mclk_tlmm_lines_act: mclk-lines-on-pins { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + ext_mclk_tlmm_lines_sus: mclk-lines-off-pins { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + }; + + ext-pri-tlmm-lines-state { + ext_pri_tlmm_lines_act: ext-pa-on-pins { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + ext_pri_tlmm_lines_sus: ext-pa-off-pins { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + }; + + ext-pri-ws-line-state { + ext_pri_ws_act: ext-pa-on-pins { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <8>; + bias-disable; + }; + + ext_pri_ws_sus: ext-pa-off-pins { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <2>; + bias-disable; + }; + }; + + /* secondary Mi2S */ + ext-sec-tlmm-lines-state { + ext_sec_tlmm_lines_act: tlmm-lines-on-pins { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + ext_sec_tlmm_lines_sus: tlmm-lines-off-pins { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <2>; + bias-disable; + }; + }; + + i2c1_default: i2c1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + i2c1_sleep: i2c1-sleep-state { + pins = "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_default: i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c3_default: i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + i2c3_sleep: i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_default: i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_sleep: i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_default: i2c5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_default: i2c6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_default_state: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc1_sleep_state: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + cd-pins { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + cd-pins { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + spi1_default: spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi1_sleep: spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + spi2_default: spi2-default-state { + spi-pins { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi2_sleep: spi2-sleep-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + spi3_default: spi3-default-state { + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi3_sleep: spi3-sleep-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + spi4_default: spi4-default-state { + spi-pins { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio14"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi4_sleep: spi4-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + spi5_default: spi5-default-state { + spi-pins { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi5_sleep: spi5-sleep-state { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + spi6_default: spi6-default-state { + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi6_sleep: spi6-sleep-state { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wcnss_pin_a: wcnss-active-state { + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8939"; + reg = <0x01800000 0x80000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&dsi_phy0 1>, + <&dsi_phy0 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "dsi0pll", + "dsi0pllbyte", + "ext_mclk", + "ext_pri_i2s", + "ext_sec_i2s"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8916", "syscon"; + reg = <0x01937000 0x30000>; + }; + + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + reg = <0x01a00000 0x1000>, + <0x01ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + interrupts = ; + interrupt-controller; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + power-domains = <&gcc MDSS_GDSC>; + + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + + status = "disabled"; + + mdp: display-controller@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 4>; + + interconnects = <&snoc_mm MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, + <&snoc_mm MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi0: dsi@1a98000 { + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x01a98000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy0 0>, + <&dsi_phy0 1>; + + phys = <&dsi_phy0>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi_phy0: phy@1a98300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01a98300 0xd4>, + <0x01a98500 0x280>, + <0x01a98780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + + dsi1: dsi@1aa0000 { + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x01aa0000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE1_CLK>, + <&gcc GCC_MDSS_PCLK1_CLK>, + <&gcc GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + assigned-clocks = <&gcc BYTE1_CLK_SRC>, + <&gcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi_phy0 0>, + <&dsi_phy0 1>; + phys = <&dsi_phy1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi_phy1: phy@1aa0300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01aa0300 0xd4>, + <0x01aa0500 0x280>, + <0x01aa0780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + gpu@1c00000 { + compatible = "qcom,adreno-405.0", "qcom,adreno"; + reg = <0x01c00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = ; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem", + "mem_iface", + "alt_mem_iface", + "gfx3d", + "rbbmtimer"; + clocks = <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_OXILI_GMEM_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GFX3D_CLK_SRC>, + <&gcc GCC_OXILI_TIMER_CLK>; + power-domains = <&gcc OXILI_GDSC>; + operating-points-v2 = <&opp_table>; + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + + opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + }; + + opp-465000000 { + opp-hz = /bits/ 64 <465000000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + + opp-220000000 { + opp-hz = /bits/ 64 <220000000>; + }; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + }; + }; + }; + + apps_iommu: iommu@1ef0000 { + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + reg = <0x01ef0000 0x3000>; + ranges = <0 0x01e20000 0x40000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + qcom,iommu-secure-id = <17>; + + /* mdp_0: */ + iommu-ctx@4000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x4000 0x1000>; + interrupts = ; + }; + + /* venus_ns: */ + iommu-ctx@5000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x5000 0x1000>; + interrupts = ; + }; + }; + + gpu_iommu: iommu@1f08000 { + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>, + <&gcc GCC_GFX_TBU_CLK>; + clock-names = "iface", "bus", "tbu"; + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + qcom,iommu-secure-id = <18>; + + /* gfx3d_user: */ + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x1000 0x1000>; + interrupts = ; + }; + + /* gfx3d_priv: */ + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x2000 0x1000>; + interrupts = ; + }; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x400000>, + <0x02c00000 0x400000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + mpss: remoteproc@4080000 { + compatible = "qcom,msm8916-mss-pil"; + reg = <0x04080000 0x100>, <0x04020000 0x040>; + reg-names = "qdsp6", "rmb"; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "bus", + "mem", + "xo"; + power-domains = <&rpmpd MSM8939_VDDMDCX>, + <&rpmpd MSM8939_VDDMX>; + power-domain-names = "cx", "mx"; + qcom,smem-states = <&hexagon_smp2p_out 0>; + qcom,smem-state-names = "stop"; + resets = <&scm 0>; + reset-names = "mss_restart"; + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = ; + + qcom,smd-edge = <0>; + mboxes = <&apcs1_mbox 12>; + qcom,remote-pid = <1>; + + label = "hexagon"; + }; + }; + + sound: sound@7702000 { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, + <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + status = "disabled"; + }; + + lpass: audio-controller@7708000 { + compatible = "qcom,apq8016-lpass-cpu"; + reg = <0x07708000 0x10000>; + reg-names = "lpass-lpaif"; + interrupts = ; + interrupt-names = "lpass-irq-lpaif"; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>; + clock-names = "ahbix-clk", + "mi2s-bit-clk0", + "mi2s-bit-clk1", + "mi2s-bit-clk2", + "mi2s-bit-clk3", + "pcnoc-mport-clk", + "pcnoc-sway-clk"; + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpass_codec: audio-codec@771c000 { + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x11c>, <0x07824000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: mmc@7864900 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x11c>, <0x07864000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + bus-width = <4>; + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + }; + + blsp_i2c1: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi1_default>; + pinctrl-1 = <&spi1_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi2: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi2_default>; + pinctrl-1 = <&spi2_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2c3_default>; + pinctrl-1 = <&i2c3_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi3_default>; + pinctrl-1 = <&spi3_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi4_default>; + pinctrl-1 = <&spi4_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c5: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi5_default>; + pinctrl-1 = <&spi5_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi6: spi@78ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi6_default>; + pinctrl-1 = <&spi6_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78d9000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078d9000 0x200>, + <0x078d9200 0x200>; + interrupts = , + ; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + #reset-cells = <1>; + phy_type = "ulpi"; + dr_mode = "otg"; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + + ulpi { + usb_hs_phy: phy { + compatible = "qcom,usb-hs-phy-msm8916", + "qcom,usb-hs-phy"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; + reset-names = "phy", "por"; + #phy-cells = <0>; + qcom,init-seq = /bits/ 8 <0x0 0x44>, + <0x1 0x6b>, + <0x2 0x24>, + <0x3 0x13>; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, + <0x0b001000 0x1000>, <0x0b004000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = ; + }; + + apcs1_mbox: mailbox@b011000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + clocks = <&a53pll_c1>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + assigned-clocks = <&apcs2>; + assigned-clock-rates = <297600000>; + #mbox-cells = <1>; + }; + + a53pll_c1: clock@b016000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b016000 0x40>; + #clock-cells = <0>; + }; + + acc0: clock-controller@b088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b088000 0x1000>; + }; + + saw0: power-manager@b089000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b089000 0x1000>; + }; + + acc1: clock-controller@b098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b098000 0x1000>; + }; + + saw1: power-manager@b099000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b099000 0x1000>; + }; + + acc2: clock-controller@b0a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0a8000 0x1000>; + }; + + saw2: power-manager@b0a9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0a9000 0x1000>; + }; + + acc3: clock-controller@b0b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0b8000 0x1000>; + }; + + saw3: power-manager@b0b9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0b9000 0x1000>; + }; + + apcs0_mbox: mailbox@b111000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b111000 0x1000>; + clocks = <&a53pll_c0>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + #mbox-cells = <1>; + }; + + a53pll_c0: clock@b116000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + }; + + acc4: clock-controller@b188000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b188000 0x1000>; + }; + + saw4: power-manager@b189000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b189000 0x1000>; + }; + + acc5: clock-controller@b198000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b198000 0x1000>; + }; + + saw5: power-manager@b199000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b199000 0x1000>; + }; + + acc6: clock-controller@b1a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b1a8000 0x1000>; + }; + + saw6: power-manager@b1a9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b1a9000 0x1000>; + }; + + acc7: clock-controller@b1b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b1b8000 0x1000>; + }; + + saw7: power-manager@b1b9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b1b9000 0x1000>; + }; + + a53pll_cci: clock@b1d0000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b1d0000 0x40>; + #clock-cells = <0>; + }; + + apcs2: mailbox@b1d1000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b1d1000 0x1000>; + clocks = <&a53pll_cci>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + #mbox-cells = <1>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b121000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + interrupts = , + ; + frame-number = <0>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + interrupts = ; + frame-number = <1>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + interrupts = ; + frame-number = <2>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + interrupts = ; + frame-number = <3>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + interrupts = ; + frame-number = <4>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + interrupts = ; + frame-number = <5>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + interrupts = ; + frame-number = <6>; + status = "disabled"; + }; + }; + + pronto: remoteproc@a204000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, + <0x0a202000 0x1000>, + <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + memory-region = <&wcnss_mem>; + + power-domains = <&rpmpd MSM8939_VDDCX>, + <&rpmpd MSM8939_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3620"; + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = ; + qcom,ipc = <&apcs1_mbox 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&pronto>; + + bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = , + ; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, + <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu0_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu1_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu2_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu3_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4567-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + cpu4567_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4567_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4567_alert>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + gpu_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + modem1_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modem2_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + cam_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; From patchwork Thu Feb 23 15:36:53 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 656094 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 48097C61DA4 for ; Thu, 23 Feb 2023 15:37:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234964AbjBWPhQ (ORCPT ); Thu, 23 Feb 2023 10:37:16 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48322 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234409AbjBWPhH (ORCPT ); Thu, 23 Feb 2023 10:37:07 -0500 Received: from mail-wm1-x333.google.com (mail-wm1-x333.google.com [IPv6:2a00:1450:4864:20::333]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 54FC8580CD for ; Thu, 23 Feb 2023 07:37:03 -0800 (PST) Received: by mail-wm1-x333.google.com with SMTP id fm20-20020a05600c0c1400b003ead37e6588so1085324wmb.5 for ; Thu, 23 Feb 2023 07:37:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=9vM1VbzTrcJFX2kv+QNORedSDbeBiRIY8moeW3HsVyE=; b=VFh3qIZStHfobxfjGkjeGzZeOlKCm7e1dBqQAKLLL7YaoMnNESuT0A04sPZNPOIo9p tkAQvAFSlssK8fiX4LWeqwSx8+ewcpvRlZFx4zWsrLZ61lD/UBxJtrsTRvFpPa8L9gpr MEKUM8DRBAqUc5dFsFQuQxz8c1g/vBbjRY3w8nvpQ7VVdoM4M5hQoHYR7YvZuEwSQ6Lk JXXafsa/6xYgqt94/3EXUcuo7NGWXamS0teFCE6BXpKiXJ0o379d74hcg12QZTvYWzR4 AxUEDJNkfGoeBIbdwvJ3iCFSnIlAYOw/SWAOxrwQwk6TlrBsTu0IPsuGCcEBOn11kkcG ubJw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=9vM1VbzTrcJFX2kv+QNORedSDbeBiRIY8moeW3HsVyE=; b=8J/GzSIg3i7+zlCP3IJizySdWx2862GmTBt7e/W7tu8V0rVw9VgeZimzzpzpkblB/Z aqt1AmuRH6fMGhV0kWTdShipbxyX8EjwLc+xuPjkItgVXNFnsF6bSCv1523hqJCwNV5U o17RYH/XeMBaz55hsUkHmIwo7q3Mo24AW2qEcLoB0TbeFUsjSocea1VJebgW8mlIakof GZiNfUi+/DcMU8nZkpfUlYiYCO96rQo0+AX4KYM7FBLZ+0BLNSc9cH7tbL705Xc2Bnxq vbRzXZkS2X1bs+WqpAYMUpjX8PPpb3xIFtAnVfO40chWkca0iqgYOgS/3XMae3rz2FK7 ucOg== X-Gm-Message-State: AO0yUKUYbqzBLeUcwcobbHLy7CyTGBp8IxnsWpWK/A2C7RYC0wDVyq6S A51zMBqw4XcHsnU9B/n2U9jEZw== X-Google-Smtp-Source: AK7set/FrTr77uOkLhOM1AU6VZ37Q+dZn6O3+u7S8c27BjgX8hPCEIHajXXCB8XisL54/QB5n3bgZw== X-Received: by 2002:a05:600c:1614:b0:3e2:662:ade6 with SMTP id m20-20020a05600c161400b003e20662ade6mr4049170wmn.26.1677166621865; Thu, 23 Feb 2023 07:37:01 -0800 (PST) Received: from sagittarius-a.chello.ie (188-141-3-169.dynamic.upc.ie. [188.141.3.169]) by smtp.gmail.com with ESMTPSA id c18-20020a05600c0a5200b003e733a973d2sm11076978wmq.39.2023.02.23.07.37.00 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 23 Feb 2023 07:37:01 -0800 (PST) From: Bryan O'Donoghue To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, djakov@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: bryan.odonoghue@linaro.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, benl@squareup.com, shawn.guo@linaro.org, fabien.parent@linaro.org, leo.yan@linaro.org, dmitry.baryshkov@linaro.org, stephan@gerhold.net Subject: [PATCH v7 3/5] arm64: dts: qcom: Add msm8939-pm8916.dtsi include Date: Thu, 23 Feb 2023 15:36:53 +0000 Message-Id: <20230223153655.262783-4-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230223153655.262783-1-bryan.odonoghue@linaro.org> References: <20230223153655.262783-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Stephan Gerhold The msm8939-pm8916.dtsi include configures the regulator supplies of MSM8939 used together with PM8916, as recommended by Qualcomm. In rare cases where boards deviate from the recommended design they can just avoid using this include. Signed-off-by: Stephan Gerhold Reviewed-by: Konrad Dybcio Signed-off-by: Bryan O'Donoghue --- arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi | 82 ++++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi diff --git a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi new file mode 100644 index 0000000000000..18a1b3cca01d6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8939.dtsi" +#include "pm8916.dtsi" + +&dsi0 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&dsi1 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&dsi_phy0 { + vddio-supply = <&pm8916_l6>; +}; + +&dsi_phy1 { + vddio-supply = <&pm8916_l6>; +}; + +&mpss { + pll-supply = <&pm8916_l7>; +}; + +&pronto { + vddpx-supply = <&pm8916_l7>; + + iris { + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; +}; + +&sdhc_2 { + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; +}; + +&usb_hs_phy { + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; +}; + +&rpm_requests { + smd_rpm_regulators: regulators { + compatible = "qcom,rpm-pm8916-regulators"; + + /* pm8916_s1 is managed by rpmpd (MSM8939_VDDMDCX) */ + /* pm8916_s2 is managed by rpmpd (MSM8939_VDDCX) */ + pm8916_s3: s3 {}; + pm8916_s4: s4 {}; + + pm8916_l1: l1 {}; + pm8916_l2: l2 {}; + /* pm8916_l3 is managed by rpmpd (MSM8939_VDDMX) */ + pm8916_l4: l4 {}; + pm8916_l5: l5 {}; + pm8916_l6: l6 {}; + pm8916_l7: l7 {}; + pm8916_l8: l8 {}; + pm8916_l9: l9 {}; + pm8916_l10: l10 {}; + pm8916_l11: l11 {}; + pm8916_l12: l12 {}; + pm8916_l13: l13 {}; + pm8916_l14: l14 {}; + pm8916_l15: l15 {}; + pm8916_l16: l16 {}; + pm8916_l17: l17 {}; + pm8916_l18: l18 {}; + }; +}; From patchwork Thu Feb 23 15:36:54 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 656093 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 3F5F0C677F1 for ; Thu, 23 Feb 2023 15:37:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233909AbjBWPhV (ORCPT ); Thu, 23 Feb 2023 10:37:21 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48806 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234967AbjBWPhQ (ORCPT ); Thu, 23 Feb 2023 10:37:16 -0500 Received: from mail-wr1-x436.google.com (mail-wr1-x436.google.com [IPv6:2a00:1450:4864:20::436]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5D8A158487 for ; Thu, 23 Feb 2023 07:37:04 -0800 (PST) Received: by mail-wr1-x436.google.com with SMTP id p8so11132032wrt.12 for ; Thu, 23 Feb 2023 07:37:04 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=D/NKAfflQl/jyYjx4Ez6hYiZ6cPOKxCvhtzlfKNfvOQ=; b=Xvs4kMn1oXVqrlaMDlW2dNdO/N5ySgz/V7nYlG6rDWLjbs1eOAS7MYOyO6auRz24WP sU/faGKB4+cTarhVAa78bl+gn9b+4gP4D9YKMghlrzMAZVq36beQZ4JuHLK2ob9n+olI XxC4o6avQcVaMeblcrVcPF14/XL4fFJtT05HzTzQ3f22s1i4yg+D9cEkHDCgvwePLlnB DIk/2WOKlPdGZSFQePDFQiYaRdRGf18rHb0sOqxhVJZXH3tt/dNMWMJ/Gh83eAAdIk6o W7NDF9HYjmGu/fJxqWMhEVXaZjIqNSp7S1c1/mEgV7weCzNY4MpDAF8DS7wXqvYRG2Hs /kyQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=D/NKAfflQl/jyYjx4Ez6hYiZ6cPOKxCvhtzlfKNfvOQ=; b=gWxTKqC+3j33u/TLfeDPDmzln8pfpDwWDOJbMZWW7SzeevgwsiFLouLVTHKMUhzPF1 ajsn9HpLiIDPGVNzeLCILNj/wadqZJQytSkmUGWMxmt27cfYP1D1G0gDf8j1wZOv2HPG ISWnnljGrdVc1sVLab9Syq+dZO9T2AKZ/aFXWPZbj5HTVmlk0WadnQhvWgYb/yJDtGD6 xCdAUXWFOUBUq+OyeDz2R/RwqSNF+j9UZxNZ91pyw8SuXY+E9f5817lYfd8VFEHIZ5Md CnU4s6WAF4pOGe4ZhtGwksbCU4CNxoCYaNDtq7tQ9/FKKf25JREIgBN4VZi4kq8+qBfI 9Hsw== X-Gm-Message-State: AO0yUKVOY6/CVRv9dq+DCyYI2BBVgVPZhqJjT9jDBBxlTfDkewiU1tw4 I0mDV9E4G6btGGkY6KwGzifwIA== X-Google-Smtp-Source: AK7set+5RtdYKObdFXLF4SvRn1uhplX+O1Paw+XmC0sRcuTp4dLhGJW5PiwtX2f45Rh79+XLnnyq5w== X-Received: by 2002:a5d:5046:0:b0:2c5:595a:1c91 with SMTP id h6-20020a5d5046000000b002c5595a1c91mr9694171wrt.7.1677166622917; Thu, 23 Feb 2023 07:37:02 -0800 (PST) Received: from sagittarius-a.chello.ie (188-141-3-169.dynamic.upc.ie. [188.141.3.169]) by smtp.gmail.com with ESMTPSA id c18-20020a05600c0a5200b003e733a973d2sm11076978wmq.39.2023.02.23.07.37.01 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 23 Feb 2023 07:37:02 -0800 (PST) From: Bryan O'Donoghue To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, djakov@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: bryan.odonoghue@linaro.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, benl@squareup.com, shawn.guo@linaro.org, fabien.parent@linaro.org, leo.yan@linaro.org, dmitry.baryshkov@linaro.org, stephan@gerhold.net, Jun Nie , James Willcox , Joseph Gates , Max Chen , Zac Crosby Subject: [PATCH v7 4/5] arm64: dts: qcom: Add Square apq8039-t2 board Date: Thu, 23 Feb 2023 15:36:54 +0000 Message-Id: <20230223153655.262783-5-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230223153655.262783-1-bryan.odonoghue@linaro.org> References: <20230223153655.262783-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The apq8039-t2 is an apq8039 based board paired with a wcn3680b WiFi chipset. Co-developed-by: Shawn Guo Signed-off-by: Shawn Guo Co-developed-by: Jun Nie Signed-off-by: Jun Nie Co-developed-by: Benjamin Li Signed-off-by: Benjamin Li Co-developed-by: James Willcox Signed-off-by: James Willcox Co-developed-by: Leo Yan Signed-off-by: Leo Yan Co-developed-by: Joseph Gates Signed-off-by: Joseph Gates Co-developed-by: Max Chen Signed-off-by: Max Chen Co-developed-by: Zac Crosby Signed-off-by: Zac Crosby Reviewed-by: Konrad Dybcio Signed-off-by: Bryan O'Donoghue --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/apq8039-t2.dts | 550 ++++++++++++++++++++++++ 2 files changed, 551 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/apq8039-t2.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 31aa54f0428c3..2983e83a19061 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts new file mode 100644 index 0000000000000..6ff044bfe2ebc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts @@ -0,0 +1,550 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Ltd. + * + */ + +/dts-v1/; + +#include "msm8939.dtsi" +#include "msm8939-pm8916.dtsi" +#include +#include +#include +#include + +/ { + model = "Square, Inc. T2 Devkit"; + compatible = "square,apq8039-t2", "qcom,msm8939"; + + qcom,board-id = <0x53 0x54>; + qcom,msm-id = , , ; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + }; + + bl: backlight { + compatible = "gpio-backlight"; + pinctrl-0 = <&pinctrl_backlight>; + pinctrl-names = "default"; + gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + vreg_lcd_avdd_reg: lcd-avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_avdd"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + pinctrl-0 = <&pinctrl_lcd_avdd_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_lcd_avee_reg: lcd-avee-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_avee"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + pinctrl-0 = <&pinctrl_lcd_avee_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_lcd_iovcc_reg: lcd-iovcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_iovcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-0 = <&pinctrl_lcd_iovcc_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_pp_crq_3v3_reg: pp-crq-3v3-regulator { + compatible = "regulator-fixed"; + pinctrl-0 = <&tlmm_crq_reg>; + pinctrl-names = "default"; + regulator-name = "pp_crq_3v3"; + gpio = <&tlmm 12 GPIO_ACTIVE_HIGH>; + startup-delay-us = <0>; + enable-active-high; + }; + + vreg_pp_spe_3v3_reg: pp-spe-3v3-regulator { + compatible = "regulator-fixed"; + pinctrl-0 = <&tlmm_spe_reg>; + pinctrl-names = "default"; + regulator-name = "pp_spe_3v3"; + gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>; + startup-delay-us = <0>; + enable-active-high; + }; +}; + +&blsp_i2c1 { + status = "okay"; +}; + +&blsp_i2c2 { + status = "okay"; +}; + +&blsp_i2c3 { + status = "okay"; + + typec_pd: usb-pd@38 { + compatible = "ti,tps6598x"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <107 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + + pinctrl-names = "default"; + pinctrl-0 = <&typec_irq>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + typec_ep: endpoint { + remote-endpoint = <&otg_ep>; + }; + }; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + status = "okay"; +}; + +&blsp1_uart2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_gpios { + gpio-line-names = + "PM_GPIO1", /* WIFI_GPIO1_PRE */ + "PM_GPIO2", /* WIFI_GPIO2_PRE */ + "PM_GPIO3", + "PM_GPIO4"; +}; + +&pronto { + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + status = "okay"; + + iris { + compatible = "qcom,wcn3680"; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + pm8916_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8916_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + /* l1 is fixed to 1225000, but not connected in schematic */ + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8916_l4: l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l10: l10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l11: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8916_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8916_l18: l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&sdhc_1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_default_state>; + pinctrl-1 = <&sdc1_sleep_state>; + status = "okay"; +}; + +&sound { + model = "apq8039-square-sndcard"; + audio-routing = "AMIC2", "MIC BIAS Internal2"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_default>; + pinctrl-1 = <&cdc_pdm_lines_sleep>; + + internal-codec-playback-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + internal-codec-capture-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +/* + * Line names are taken from the schematic of T2, Ver X03. + * July 14, 2018. Page 4 in particular. + */ +&tlmm { + gpio-line-names = + "APQ_UART1_TX", /* GPIO_0 */ + "APQ_UART1_RX", + "APQ_I2C1_SDA", + "APQ_I2C1_SCL", + "APQ_UART2_TX_1V8", + "APQ_UART2_RX_1V8", + "APQ_I2C2_SDA", + "APQ_I2C2_SCL", + "NC", + "APQ_LCD_IOVCC_EN", + "APQ_I2C3_SDA", /* GPIO_10 */ + "APQ_I2C3_SCL", + "TOUCH_RST_1V8_L", + "NC", + "APQ_I2C4_SDA", + "APQ_I2C4_SCL", + "APQ_ID5", + "USB_DISCONNECT", + "APQ_I2C5_SDA", + "APQ_I2C5_SCL", + "APQ_USBC_SPI_MOSI", /* GPIO_20 */ + "APQ_USBC_SPI_MISO", + "APQ_USBC_SPI_SS_L", + "APQ_USBC_SPI_CLK", + "APQ_LCD_TE0", + "APQ_LCD_RST_L", + "NC", + "NC", + "ACCELEROMETER_INT1", + "APQ_CAM_I2C0_SDA", + "APQ_CAM_I2C0_SCL", /* GPIO_30 */ + "ACCELEROMETER_INT2", + "NC", + "NC", + "NC", + "APQ_K21_RST_1V8_L", + "NC", + "APQ_EDL_1V8", + "TP145", + "BT_SSBI", + "NC", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "BT_CTRL", + "BT_DAT", + "PWR_GPIO_IN", + "PWR_GPIO_OUT", /* GPIO_50 */ + "CARD_DET_MLB_L", + "HALL_SENSOR", + "TP63", + "TP64", + "TP65", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO_60 */ + "NC", + "APQ_K21_GPIO0_1V8", + "CDC_PDM_CLK", + "CDC_PDM_SYNC", + "CDC_PDM_TX", + "CDC_PDM_RX0", + "CDC_PDM_RX1", + "CDC_PDM_RX2", + "APQ_K21_GPIO1_1V8", + "NC", /* GPIO_70 */ + "APQ_HUB_SEL_1V8", + "APQ_K21_GPIO2_1V8", + "APQ_K21_GPIO3_1V8", + "APQ_ID0", + "APQ_ID1", + "APQ_ID2", + "APQ_ID3", + "APQ_ID4", + "APQ_HUB_SUSP_IND", + "BOOT_CONFIG_0", /* GPIO_80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "APQ_LCD_AVDD_EN", + "APQ_LCD_AVEE_EN", + "TP70", + "NC", + "APQ_DEBUG0", /* GPIO_90 */ + "APQ_DEBUG1", + "APQ_DEBUG2", + "APQ_DEBUG3", + "TP165", + "NC", + "APQ_LNA_PWR_EN", + "NC", + "APQ_LCD_BL_EN", + "NC", + "APQ_LCD_ID0", /* GPIO_100 */ + "APQ_LCD_ID1", + "USBC_GPIO5_1V8", + "NC", + "NC", + "NC", + "APQ_HUB_RST_1V8_L", + "USBC_I2C_IRQ_1V8_L", + "SPE_PWR_EN", + "NC", + "APQ_USB_ID", /* GPIO_110 */ + "APQ_EXT_BUCK_VSEL", + "APQ_USB_ID_OUT", + "NC", + "PRNT_RST_L", + "APQ_CRQ_I2C_RDY_1V8", + "TYPEC_RST_1V8_H", + "CHG_BACKPWR_EN", + "CHG_PROCHOT_L", + "NC", + "USBC_GPIO7_1V8", /* GPIO_120 */ + "NC"; + + blsp1_uart1_default: blsp1-uart1-default-state { + pins = "gpio0", "gpio1"; + function = "blsp_uart1"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep-state { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + ext_buck_vsel_reg: ext-buck-vsel-reg-state { + function = "gpio"; + pins = "gpio111"; + drive-strength = <2>; + }; + + pinctrl_backlight: backlight-state { + pins = "gpio98"; + function = "gpio"; + }; + + pinctrl_lcd_avdd_reg: lcd-avdd-reg-state { + pins = "gpio86"; + function = "gpio"; + }; + + pinctrl_lcd_avee_reg: lcd-avee-reg-state { + pins = "gpio87"; + function = "gpio"; + }; + + pinctrl_lcd_iovcc_reg: lcd-iovcc-reg-state { + pins = "gpio9"; + function = "gpio"; + }; + + pinctrl_lcd_rst: lcd-rst-state { + pins = "gpio25"; + function = "gpio"; + }; + + pinctrl_otg_default: otg-default-state { + function = "gpio"; + pins = "gpio17"; + output-high; + }; + + pinctrl_otg_device: otg-device-state { + function = "gpio"; + pins = "gpio17"; + output-low; + }; + + pinctrl_otg_host: otg-host-state { + function = "gpio"; + pins = "gpio17"; + output-low; + }; + + sq_spe_enable: sq-spe-enable-state { + pins = "gpio35"; + function = "gpio"; + output-low; + }; + + tlmm_crq_reg: tlmm-crq-reg-state { + function = "gpio"; + pins = "gpio12"; + output-high; + }; + + tlmm_spe_reg: tlmm-spe-reg-state { + pins = "gpio108"; + function = "gpio"; + output-high; + }; + + typec_irq: typec-irq-state { + function = "gpio"; + pins = "gpio107"; + bias-pull-up; + input-enable; + }; +}; + +&usb { + pinctrl-names = "default", "host", "device"; + pinctrl-0 = <&pinctrl_otg_default>; + pinctrl-1 = <&pinctrl_otg_host>; + pinctrl-2 = <&pinctrl_otg_device>; + pin-switch-delay-us = <100000>; + usb-role-switch; + status = "okay"; + + port { + otg_ep: endpoint { + remote-endpoint = <&typec_ep>; + }; + }; +}; + +&wcd_codec { + qcom,hphl-jack-type-normally-open; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + status = "okay"; +}; From patchwork Thu Feb 23 15:36:55 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 657319 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7381DC6379F for ; Thu, 23 Feb 2023 15:37:29 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234943AbjBWPh1 (ORCPT ); Thu, 23 Feb 2023 10:37:27 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48862 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234975AbjBWPhR (ORCPT ); Thu, 23 Feb 2023 10:37:17 -0500 Received: from mail-wm1-x32d.google.com (mail-wm1-x32d.google.com [IPv6:2a00:1450:4864:20::32d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 651EC59434 for ; Thu, 23 Feb 2023 07:37:05 -0800 (PST) Received: by mail-wm1-x32d.google.com with SMTP id c18so4630645wmr.3 for ; Thu, 23 Feb 2023 07:37:05 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=G/tJ2JMtTtWdrvRORgn45WjOaYptTrhld5Ae5l8mf8Y=; b=tMv3MaC4z4QI7fGDXmwH3bk/3qRfEH+UuX2ga3rG7wr9DOMsXu57JPP4R7tvEoQlFQ bk+VladoLmImWygeNecxJbDtlTj8621sguDWWR97YLHHO/3lCP6S56zOO78n2xyQD9Ic 7HVRgkfsjR5srZwC3CQgadIu/8cNRS6vPQmcTRD8lzfCj8J+808pPiznBDhyEiPPI7O1 AzEdjvRA0wgp7mCxcjqa3MqIg6bqMeFvT0JE1UlOLxbFavWGWdmNDt0crm6/3KQl6Doy r+uSw01Kb6dj8ZjAjawFOPDo0tFUxdZNRYgPwbbckxjKtKTwOFAk1nYZxxEudztmt1gt C9dw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=G/tJ2JMtTtWdrvRORgn45WjOaYptTrhld5Ae5l8mf8Y=; b=8SJvZxshagmPC5xCNMjjH2kA0mIeX7FzL2qC7q9V4iAnMGQk/TuluJShpwPD+APMm4 7fo6A4Z9/rBRJRuGbYzhobhE5AvyDeVHtQBZj3Uksc9tjcj2ZFDIw23YdxngCNvWZDED mRAKcOKCHSpXx0bcM8YxNGWmd6+9wfPCVVF7koabQwamsQrvYraJQWTQkALZ17pi+mh0 JGfbwZCQ9xeq2SRsZ10SDZl/8YSjvSEWOMEbZaEhL4qvKQQE7kRG7ajMYzQYPFgHvbX6 XTuJCo6Y1xrmqL9/oBCZQhrPjefH6YC/0gYP/ohcGb/L9xYETqehne1VZhhFPFMNOCVb xe7g== X-Gm-Message-State: AO0yUKXCgXqs1Gn6Fit3YDlvKFj3ltJ8JoqtChsIko7A8Mnty0sEViXh l4xOjaJnW7S5KgM9ZRSEmznuSQ== X-Google-Smtp-Source: AK7set/BlxVqr8G7pDdEvH8FyRY0mcTlcS/4tdY57VNiYebfErj5FCPxrDr1djTcjkxoAbB5PNuA4g== X-Received: by 2002:a05:600c:2e84:b0:3dc:5e0d:4ce7 with SMTP id p4-20020a05600c2e8400b003dc5e0d4ce7mr9204945wmn.11.1677166623848; Thu, 23 Feb 2023 07:37:03 -0800 (PST) Received: from sagittarius-a.chello.ie (188-141-3-169.dynamic.upc.ie. [188.141.3.169]) by smtp.gmail.com with ESMTPSA id c18-20020a05600c0a5200b003e733a973d2sm11076978wmq.39.2023.02.23.07.37.03 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 23 Feb 2023 07:37:03 -0800 (PST) From: Bryan O'Donoghue To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, djakov@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: bryan.odonoghue@linaro.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, benl@squareup.com, shawn.guo@linaro.org, fabien.parent@linaro.org, leo.yan@linaro.org, dmitry.baryshkov@linaro.org, stephan@gerhold.net Subject: [PATCH v7 5/5] arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua Date: Thu, 23 Feb 2023 15:36:55 +0000 Message-Id: <20230223153655.262783-6-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230223153655.262783-1-bryan.odonoghue@linaro.org> References: <20230223153655.262783-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add a basic booting DTS for the Sony Xperia M4 Aqua aka "tulip". Tulip is paired with: - wcn3660 - smb1360 battery charger - 720p Truly NT35521 Panel Reviewed-by: Konrad Dybcio Signed-off-by: Bryan O'Donoghue --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/msm8939-sony-xperia-kanuti-tulip.dts | 457 ++++++++++++++++++ 2 files changed, 458 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 2983e83a19061..81a38d46deba5 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts new file mode 100644 index 0000000000000..c646fada11a5a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023, Bryan O'Donoghue. + * + */ + +/dts-v1/; + +#include "msm8939.dtsi" +#include "msm8939-pm8916.dtsi" +#include +#include +#include + +/ { + model = "Sony Xperia M4 Aqua"; + compatible = "sony,kanuti-tulip", "qcom,msm8939"; + + qcom,board-id = <8 0>; + qcom,msm-id = , ; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vreg_negative5_reg: negative5-regulator { + compatible = "regulator-fixed"; + pinctrl-0 = <&negative5_reg_default>; + pinctrl-names = "default"; + regulator-name = "negative5_reg"; + gpio = <&tlmm 17 GPIO_ACTIVE_LOW>; + startup-delay-us = <0>; + }; + + vreg_positive5_reg: positive5-regulator { + compatible = "regulator-fixed"; + pinctrl-0 = <&positive5_reg_default>; + pinctrl-names = "default"; + regulator-name = "positive5_reg"; + gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; + startup-delay-us = <0>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&dsi0 { + status = "okay"; + + panel@0 { + compatible = "sony,tulip-truly-nt35521"; + reg = <0>; + positive5-supply = <&vreg_positive5_reg>; + negative5-supply = <&vreg_negative5_reg>; + reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; + enable-gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; + + ports { + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&tlmm { + ak8963_default: ak8963-default-state { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <6>; + }; + + ak8963_sleep: ak8963-sleep-state { + pins = "gpio69"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + /* Ambient light and proximity sensor apds9930 and apds9900 */ + apds99xx_default: apds99xx-default-state { + pins = "gpio113"; + function = "gpio"; + bias-pull-up; + drive-strength = <6>; + }; + + apds99xx_sleep: apds99xx-sleep-state { + pins = "gpio113"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + cam_sensor_flash_default: cam-sensor-flash-default-state { + pins = "gpio98", "gpio97"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cci1_default: cci1-default-state { + pins = "gpio31", "gpio32"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cdc_ext_spk_pa_active: cdc-ext-spk-pa-on-state { + pins = "gpio0"; + function = "gpio"; + drive-strength = <8>; + output-low; + }; + + cdc_ext_spk_pa_sus: cdc-ext-spk-pa-off-state { + pins = "gpio0"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cdc_slim_lines_act: lines-on-state { + pins = "gpio63"; + function = "cdc_pdm0"; + drive-strength = <8>; + output-high; + }; + + cdc_slim_lines_sus: lines-off-state { + pins = "gpio63"; + function = "cdc_pdm0"; + bias-disable; + drive-strength = <2>; + }; + + cross_conn_det_act: lines-on-state { + pins = "gpio120"; + function = "gpio"; + bias-pull-down; + drive-strength = <8>; + output-low; + }; + + cross_conn_det_sus: lines-off-state { + pins = "gpio120"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + ext_buck_vsel: vsel0-state { + pins = "gpio111"; + function = "gpio"; + drive-strength = <2>; + }; + + ext_cdc_tlmm_lines_act: tlmm-lines-on-state { + pins = "gpio116", "gpio112", "gpio117", "gpio118", "gpio119"; + function = "gpio"; + bias-disable; + drive-strength = <8>; + }; + + ext_cdc_tlmm_lines_sus: tlmm-lines-off-state { + pins = "gpio116", "gpio112", "gpio117", "gpio118", "gpio119"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + gpio_key_suspend: gpio-key-suspend-state { + pins = "gpio107", "gpio108", "gpio109"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + negative5_reg_default: negative5-reg-default-state { + pins = "gpio17"; + function = "gpio"; + output-low; + }; + + positive5_reg_default: positive5-reg-default-state { + pins = "gpio114"; + function = "gpio"; + output-low; + }; + + /* Gyroscope and accelerometer sensor combo */ + mpu6050_default: mpu6050-default-state { + pins = "gpio115"; + function = "gpio"; + bias-pull-up; + drive-strength = <6>; + }; + + mpu6050_sleep: mpu6050-sleep-state { + pins = "gpio115"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + nfc_disable_active: nfc-disable-active-state { + pins = "gpio20"; + function = "gpio"; + bias-pull-up; + drive-strength = <6>; + }; + + nfc_disable_suspend: nfc-disable-suspend-state { + pins = "gpio20"; + function = "gpio"; + bias-disable; + drive-strength = <6>; + }; + + nfc_int_active: nfc-int-active-state { + pins = "gpio21"; + function = "gpio"; + bias-pull-up; + drive-strength = <6>; + }; + + nfc_int_suspend: nfc-int-suspend-state { + pins = "gpio21"; + function = "gpio"; + bias-pull-up; + drive-strength = <6>; + }; + + nt35521_te_default: nt35521-te-default-state { + pins = "gpio24"; + function = "gpio"; + bias-pull-down; + drive-strength = <6>; + }; + + nt35521_backlight: nt35521-backlight-default-state { + pins = "gpio10"; + function = "gpio"; + bias-pull-down; + drive-strength = <6>; + }; + + smb_int: smb-int-default-state { + pins = "gpio62"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + ts_int_active: ts-int-active-state { + pins = "gpio13"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; + }; + + ts_int_suspend: ts-int-suspend-state { + pins = "gpio13"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + ts_reset_active: ts-reset-active-state { + pins = "gpio12"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; + }; + + ts_reset_suspend: ts-reset-suspend-state { + pins = "gpio12"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + ts_release: ts-release-default-state { + pins = "gpio13", "gpio12"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + bias-pull-up; + drive-strength = <8>; + }; +}; + +&pronto { + status = "okay"; + + iris { + compatible = "qcom,wcn3660"; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + pm8916_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8916_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8916_l4: l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l10: l10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l11: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8916_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8916_l18: l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_default_state>; + pinctrl-1 = <&sdc1_sleep_state>; + pinctrl-names = "default", "sleep"; + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default_state>; + pinctrl-1 = <&sdc2_sleep_state>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +};