From patchwork Thu Jun 1 20:18:36 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 687867 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2D89CC7EE2E for ; Thu, 1 Jun 2023 20:19:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231659AbjFAUS7 (ORCPT ); Thu, 1 Jun 2023 16:18:59 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48250 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231213AbjFAUS6 (ORCPT ); Thu, 1 Jun 2023 16:18:58 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id EBFFC128; Thu, 1 Jun 2023 13:18:57 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:Content-Type:MIME-Version: References:In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Id:List-Help:List-Unsubscribe:List-Subscribe: List-Post:List-Owner:List-Archive; bh=vlvSfJ7BB6pGJBxrOhJ5IMJLf95UIyksZ/69U1YnCu4=; b=NR4k24b2NLfmmqYMLtFGjBx5nS vRCBp6cbBxBSuTivEsG++AtkkoRSKudtkj8STFjr1yWMToj9hurlV7+NTy8m73a/7A2EDYvoGgS0D i5r6tpZ/8cmBw8seAuJs4dzayJT4PKaUF41f2ZdMCtzbJ49mzX3MoK3tw6GxKJeCANE4=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:39204 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q4oky-000686-QQ; Thu, 01 Jun 2023 16:18:49 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , stable@vger.kernel.org, =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Lech Perczak Date: Thu, 1 Jun 2023 16:18:36 -0400 Message-Id: <20230601201844.3739926-2-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230601201844.3739926-1-hugo@hugovil.com> References: <20230601201844.3739926-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v6 1/9] serial: sc16is7xx: fix broken port 0 uart init X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Hugo Villeneuve The sc16is7xx_config_rs485() function is called only for the second port (index 1, channel B), causing initialization problems for the first port. For the sc16is7xx driver, port->membase and port->mapbase are not set, and their default values are 0. And we set port->iobase to the device index. This means that when the first device is registered using the uart_add_one_port() function, the following values will be in the port structure: port->membase = 0 port->mapbase = 0 port->iobase = 0 Therefore, the function uart_configure_port() in serial_core.c will exit early because of the following check: /* * If there isn't a port here, don't do anything further. */ if (!port->iobase && !port->mapbase && !port->membase) return; Typically, I2C and SPI drivers do not set port->membase and port->mapbase. The max310x driver sets port->membase to ~0 (all ones). By implementing the same change in this driver, uart_configure_port() is now correctly executed for all ports. Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: # 6.1.x Signed-off-by: Hugo Villeneuve Reviewed-by: Ilpo Järvinen Reviewed-by: Lech Perczak Tested-by: Lech Perczak --- drivers/tty/serial/sc16is7xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index abad091baeea..faa51a58671f 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1436,6 +1436,7 @@ static int sc16is7xx_probe(struct device *dev, s->p[i].port.fifosize = SC16IS7XX_FIFO_SIZE; s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; s->p[i].port.iobase = i; + s->p[i].port.membase = (void __iomem *)~0; s->p[i].port.iotype = UPIO_PORT; s->p[i].port.uartclk = freq; s->p[i].port.rs485_config = sc16is7xx_config_rs485; From patchwork Thu Jun 1 20:18:37 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 688433 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 270C1C77B7E for ; Thu, 1 Jun 2023 20:19:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231678AbjFAUTA (ORCPT ); Thu, 1 Jun 2023 16:19:00 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48248 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231520AbjFAUS6 (ORCPT ); Thu, 1 Jun 2023 16:18:58 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id EBF65D1; Thu, 1 Jun 2023 13:18:57 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=T/ybH+luXFJtRUNLsANdxNj5MlosRcBXIwuB3tKL/mQ=; b=XBVYQPn54+UaXJWMEcflRq65nw X1YXvZHzNzS78BamaYD7NhzYDX+Sl0Kr16oGgpC0ETGhgH3ppum1Q6V+GagI+qxUjQysjs9SkzSXm skLeYA9l2lRGkkUXNMMQIbY1gz0BN+mvrGMAJ/6K7pEeXKGGix2b8xb5eaBHnYQ7LKYA=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:39204 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q4ol0-000686-4g; Thu, 01 Jun 2023 16:18:50 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , stable@vger.kernel.org, Lech Perczak Date: Thu, 1 Jun 2023 16:18:37 -0400 Message-Id: <20230601201844.3739926-3-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230601201844.3739926-1-hugo@hugovil.com> References: <20230601201844.3739926-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v6 2/9] serial: sc16is7xx: mark IOCONTROL register as volatile X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Hugo Villeneuve Bit SRESET (3) is cleared when a reset operation is completed. Having the IOCONTROL register as non-volatile will always read SRESET as 1, which is incorrect. Also, if IOCONTROL register is not a volatile register, the upcoming patch "serial: sc16is7xx: fix regression with GPIO configuration" doesn't work when setting some shared GPIO lines as modem control lines. Therefore mark IOCONTROL register as a volatile register. Cc: # 6.1.x Signed-off-by: Hugo Villeneuve Reviewed-by: Lech Perczak Tested-by: Lech Perczak --- drivers/tty/serial/sc16is7xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index faa51a58671f..0c903d44429c 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -488,6 +488,7 @@ static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) case SC16IS7XX_TXLVL_REG: case SC16IS7XX_RXLVL_REG: case SC16IS7XX_IOSTATE_REG: + case SC16IS7XX_IOCONTROL_REG: return true; default: break; From patchwork Thu Jun 1 20:18:38 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 688432 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 41A40C7EE2E for ; Thu, 1 Jun 2023 20:19:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231680AbjFAUTE (ORCPT ); Thu, 1 Jun 2023 16:19:04 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48268 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231718AbjFAUTA (ORCPT ); Thu, 1 Jun 2023 16:19:00 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 297CB18D; Thu, 1 Jun 2023 13:18:59 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=PvKU1KZMqnBynFfs1LyL8913fUHPvhHtVoFLTU7Udeg=; b=p04ZgL+mCMnU7bmy0qq0MHsqW/ ztu0zrwLOOCWWaunMKTI7ul61nx+6vuFTo4+KUrA8Hi+zqSDSU1BrKWAQOwTzsdRfcIJV54WR3caz yIw/G320ytQLvKZkX31sIkPHGstYyTjC8HeKCR4hhBNrWbNiJo239Oh/GgwXVMFNkpZ8=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:39204 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q4ol1-000686-Cn; Thu, 01 Jun 2023 16:18:52 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , stable@vger.kernel.org, Lech Perczak Date: Thu, 1 Jun 2023 16:18:38 -0400 Message-Id: <20230601201844.3739926-4-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230601201844.3739926-1-hugo@hugovil.com> References: <20230601201844.3739926-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v6 3/9] serial: sc16is7xx: refactor GPIO controller registration X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Hugo Villeneuve In preparation for upcoming patch "fix regression with GPIO configuration". To facilitate review and make code more modular. Cc: # 6.1.x Signed-off-by: Hugo Villeneuve Reviewed-by: Lech Perczak Tested-by: Lech Perczak --- drivers/tty/serial/sc16is7xx.c | 39 ++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 16 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 0c903d44429c..7d50674d2d0e 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1349,6 +1349,26 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, return 0; } + +static int sc16is7xx_setup_gpio_chip(struct device *dev) +{ + struct sc16is7xx_port *s = dev_get_drvdata(dev); + + if (!s->devtype->nr_gpio) + return 0; + + s->gpio.owner = THIS_MODULE; + s->gpio.parent = dev; + s->gpio.label = dev_name(dev); + s->gpio.direction_input = sc16is7xx_gpio_direction_input; + s->gpio.get = sc16is7xx_gpio_get; + s->gpio.direction_output = sc16is7xx_gpio_direction_output; + s->gpio.set = sc16is7xx_gpio_set; + s->gpio.base = -1; + s->gpio.ngpio = s->devtype->nr_gpio; + s->gpio.can_sleep = 1; + return gpiochip_add_data(&s->gpio, s); +} #endif static const struct serial_rs485 sc16is7xx_rs485_supported = { @@ -1502,22 +1522,9 @@ static int sc16is7xx_probe(struct device *dev, } #ifdef CONFIG_GPIOLIB - if (devtype->nr_gpio) { - /* Setup GPIO cotroller */ - s->gpio.owner = THIS_MODULE; - s->gpio.parent = dev; - s->gpio.label = dev_name(dev); - s->gpio.direction_input = sc16is7xx_gpio_direction_input; - s->gpio.get = sc16is7xx_gpio_get; - s->gpio.direction_output = sc16is7xx_gpio_direction_output; - s->gpio.set = sc16is7xx_gpio_set; - s->gpio.base = -1; - s->gpio.ngpio = devtype->nr_gpio; - s->gpio.can_sleep = 1; - ret = gpiochip_add_data(&s->gpio, s); - if (ret) - goto out_thread; - } + ret = sc16is7xx_setup_gpio_chip(dev); + if (ret) + goto out_thread; #endif /* From patchwork Thu Jun 1 20:18:39 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 687865 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C6FF6C77B7E for ; Thu, 1 Jun 2023 20:19:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231826AbjFAUTF (ORCPT ); Thu, 1 Jun 2023 16:19:05 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48278 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231545AbjFAUTC (ORCPT ); Thu, 1 Jun 2023 16:19:02 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8CCC7D1; Thu, 1 Jun 2023 13:19:00 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=SuJQI5JxUPzY+H5j7N6gL+Df0hCmvZbTgQvKUtpTEpg=; b=Oa5D2/22yJ/hGuV1pAfsP/G9NZ MtZ7RpKRGlablVyof1pn52zeRLIRvXdaGjcYzWq7S/e8g1SxLOUkLrj1N+h5bbzj/wIztPsaRjwJx 2RdAuLhLiEFwMq9OJPUhY8kqEcDp1K6LCKtJ4kmlb4G0PwYevwU27SUSdhappaxYKlq8=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:39204 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q4ol2-000686-S0; Thu, 01 Jun 2023 16:18:53 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , stable@vger.kernel.org, Conor Dooley , Lech Perczak Date: Thu, 1 Jun 2023 16:18:39 -0400 Message-Id: <20230601201844.3739926-5-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230601201844.3739926-1-hugo@hugovil.com> References: <20230601201844.3739926-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v6 4/9] dt-bindings: sc16is7xx: Add property to change GPIO function X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Hugo Villeneuve Some variants in this series of UART controllers have GPIO pins that are shared between GPIO and modem control lines. The pin mux mode (GPIO or modem control lines) can be set for each ports (channels) supported by the variant. This adds a property to the device tree to set the GPIO pin mux to modem control lines on selected ports if needed. Cc: # 6.1.x Signed-off-by: Hugo Villeneuve Acked-by: Conor Dooley Reviewed-by: Lech Perczak --- .../bindings/serial/nxp,sc16is7xx.txt | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt index 0fa8e3e43bf8..1a7e4bff0456 100644 --- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt +++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt @@ -23,6 +23,9 @@ Optional properties: 1 = active low. - irda-mode-ports: An array that lists the indices of the port that should operate in IrDA mode. +- nxp,modem-control-line-ports: An array that lists the indices of the port that + should have shared GPIO lines configured as + modem control lines. Example: sc16is750: sc16is750@51 { @@ -35,6 +38,26 @@ Example: #gpio-cells = <2>; }; + sc16is752: sc16is752@53 { + compatible = "nxp,sc16is752"; + reg = <0x53>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */ + gpio-controller; /* Port 0 as GPIOs */ + #gpio-cells = <2>; + }; + + sc16is752: sc16is752@54 { + compatible = "nxp,sc16is752"; + reg = <0x54>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */ + }; + * spi as bus Required properties: @@ -59,6 +82,9 @@ Optional properties: 1 = active low. - irda-mode-ports: An array that lists the indices of the port that should operate in IrDA mode. +- nxp,modem-control-line-ports: An array that lists the indices of the port that + should have shared GPIO lines configured as + modem control lines. Example: sc16is750: sc16is750@0 { @@ -70,3 +96,23 @@ Example: gpio-controller; #gpio-cells = <2>; }; + + sc16is752: sc16is752@1 { + compatible = "nxp,sc16is752"; + reg = <1>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */ + gpio-controller; /* Port 0 as GPIOs */ + #gpio-cells = <2>; + }; + + sc16is752: sc16is752@2 { + compatible = "nxp,sc16is752"; + reg = <2>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */ + }; From patchwork Thu Jun 1 20:18:40 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 688429 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7E5C3C7EE29 for ; Thu, 1 Jun 2023 20:19:25 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231162AbjFAUTY (ORCPT ); Thu, 1 Jun 2023 16:19:24 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48342 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231926AbjFAUTF (ORCPT ); Thu, 1 Jun 2023 16:19:05 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 192FF198; Thu, 1 Jun 2023 13:19:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=hEflR0XEH91vm7nnoLolEjlsR6byylaX01ee4kA2NTI=; b=spAxrHkv2w5dfiy7LfhQd6dwyt eUgqDoFFlZpfZCqRS21GV4ZFuvfCdgdiKIWKMHWryWoR4y2p5aW0UuBurzaVeYEVvbeUan2zV9IBl iodwQYZXy9S9sYqJ1oMssFUNDG7y2szWrU9ZqoU/0rBNa78Wclb5vXMXwmd3RIRAN3iE=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:39204 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q4ol4-000686-Eg; Thu, 01 Jun 2023 16:18:55 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , stable@vger.kernel.org Date: Thu, 1 Jun 2023 16:18:40 -0400 Message-Id: <20230601201844.3739926-6-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230601201844.3739926-1-hugo@hugovil.com> References: <20230601201844.3739926-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v6 5/9] serial: sc16is7xx: fix regression with GPIO configuration X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Hugo Villeneuve Commit 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") and commit 21144bab4f11 ("sc16is7xx: Handle modem status lines") changed the function of the GPIOs pins to act as modem control lines without any possibility of selecting GPIO function. As a consequence, applications that depends on GPIO lines configured by default as GPIO pins no longer work as expected. Also, the change to select modem control lines function was done only for channel A of dual UART variants (752/762). This was not documented in the log message. Allow to specify GPIO or modem control line function in the device tree, and for each of the ports (A or B). Do so by using the new device-tree property named "modem-control-line-ports" (property added in separate patch). When registering GPIO chip controller, mask-out GPIO pins declared as modem control lines according to this new "modem-control-line-ports" DT property. Boards that need to have GPIOS configured as modem control lines should add that property to their device tree. Here is a list of boards using the sc16is7xx driver in their device tree and that may need to be modified: arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts mips/boot/dts/ingenic/cu1830-neo.dts mips/boot/dts/ingenic/cu1000-neo.dts Fixes: 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") Fixes: 21144bab4f11 ("sc16is7xx: Handle modem status lines") Cc: # 6.1.x: 35210b22 dt-bindings: sc16is7xx: Add property to change GPIO function Cc: # 6.1.x: 7d61ca47 serial: sc16is7xx: refactor GPIO controller registration Cc: # 6.1.x: 322470ed serial: sc16is7xx: mark IOCONTROL register as volatile Cc: # 6.1.x: a0077362 serial: sc16is7xx: fix broken port 0 uart init Cc: # 6.1.x Signed-off-by: Hugo Villeneuve --- drivers/tty/serial/sc16is7xx.c | 102 ++++++++++++++++++++++++++------- 1 file changed, 81 insertions(+), 21 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 7d50674d2d0e..ad6b9d613b33 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -236,7 +236,8 @@ /* IOControl register bits (Only 750/760) */ #define SC16IS7XX_IOCONTROL_LATCH_BIT (1 << 0) /* Enable input latching */ -#define SC16IS7XX_IOCONTROL_MODEM_BIT (1 << 1) /* Enable GPIO[7:4] as modem pins */ +#define SC16IS7XX_IOCONTROL_MODEM_A_BIT (1 << 1) /* Enable GPIO[7:4] as modem A pins */ +#define SC16IS7XX_IOCONTROL_MODEM_B_BIT (1 << 2) /* Enable GPIO[3:0] as modem B pins */ #define SC16IS7XX_IOCONTROL_SRESET_BIT (1 << 3) /* Software Reset */ /* EFCR register bits */ @@ -301,12 +302,12 @@ /* Misc definitions */ #define SC16IS7XX_FIFO_SIZE (64) #define SC16IS7XX_REG_SHIFT 2 +#define SC16IS7XX_GPIOS_PER_BANK 4 struct sc16is7xx_devtype { char name[10]; int nr_gpio; int nr_uart; - int has_mctrl; }; #define SC16IS7XX_RECONF_MD (1 << 0) @@ -336,6 +337,7 @@ struct sc16is7xx_port { struct clk *clk; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; + unsigned long gpio_valid_mask; #endif unsigned char buf[SC16IS7XX_FIFO_SIZE]; struct kthread_worker kworker; @@ -447,35 +449,30 @@ static const struct sc16is7xx_devtype sc16is74x_devtype = { .name = "SC16IS74X", .nr_gpio = 0, .nr_uart = 1, - .has_mctrl = 0, }; static const struct sc16is7xx_devtype sc16is750_devtype = { .name = "SC16IS750", - .nr_gpio = 4, + .nr_gpio = 8, .nr_uart = 1, - .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is752_devtype = { .name = "SC16IS752", - .nr_gpio = 0, + .nr_gpio = 8, .nr_uart = 2, - .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is760_devtype = { .name = "SC16IS760", - .nr_gpio = 4, + .nr_gpio = 8, .nr_uart = 1, - .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is762_devtype = { .name = "SC16IS762", - .nr_gpio = 0, + .nr_gpio = 8, .nr_uart = 2, - .has_mctrl = 1, }; static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) @@ -1350,16 +1347,45 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, return 0; } -static int sc16is7xx_setup_gpio_chip(struct device *dev) +static int sc16is7xx_gpio_init_valid_mask(struct gpio_chip *chip, + unsigned long *valid_mask, + unsigned int ngpios) +{ + struct sc16is7xx_port *s = gpiochip_get_data(chip); + + *valid_mask = s->gpio_valid_mask; + + return 0; +} + +static int sc16is7xx_setup_gpio_chip(struct device *dev, u8 mctrl_mask) { struct sc16is7xx_port *s = dev_get_drvdata(dev); if (!s->devtype->nr_gpio) return 0; + switch (mctrl_mask) { + case 0: + s->gpio_valid_mask = GENMASK(7, 0); + break; + case SC16IS7XX_IOCONTROL_MODEM_A_BIT: + s->gpio_valid_mask = GENMASK(3, 0); + break; + case SC16IS7XX_IOCONTROL_MODEM_B_BIT: + s->gpio_valid_mask = GENMASK(7, 4); + break; + default: + break; + } + + if (!s->gpio_valid_mask) + return 0; + s->gpio.owner = THIS_MODULE; s->gpio.parent = dev; s->gpio.label = dev_name(dev); + s->gpio.init_valid_mask = sc16is7xx_gpio_init_valid_mask; s->gpio.direction_input = sc16is7xx_gpio_direction_input; s->gpio.get = sc16is7xx_gpio_get; s->gpio.direction_output = sc16is7xx_gpio_direction_output; @@ -1371,6 +1397,43 @@ static int sc16is7xx_setup_gpio_chip(struct device *dev) } #endif +static int sc16is7xx_setup_mctrl_ports(struct device *dev) +{ + struct sc16is7xx_port *s = dev_get_drvdata(dev); + int i; + int ret; + int count; + u32 mctrl_port[2]; + u8 mctrl_mask = 0; + + count = device_property_count_u32(dev, "nxp,modem-control-line-ports"); + if (count < 0 || count > ARRAY_SIZE(mctrl_port)) + return mctrl_mask; + + ret = device_property_read_u32_array(dev, "nxp,modem-control-line-ports", + mctrl_port, count); + if (ret) + return mctrl_mask; + + for (i = 0; i < count; i++) { + /* Use GPIO lines as modem control lines */ + if (mctrl_port[i] == 0) + mctrl_mask |= SC16IS7XX_IOCONTROL_MODEM_A_BIT; + else if (mctrl_port[i] == 1) + mctrl_mask |= SC16IS7XX_IOCONTROL_MODEM_B_BIT; + } + + if (!mctrl_mask) + return mctrl_mask; + + regmap_update_bits(s->regmap, + SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT, + SC16IS7XX_IOCONTROL_MODEM_A_BIT | + SC16IS7XX_IOCONTROL_MODEM_B_BIT, mctrl_mask); + + return mctrl_mask; +} + static const struct serial_rs485 sc16is7xx_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND, .delay_rts_before_send = 1, @@ -1383,6 +1446,7 @@ static int sc16is7xx_probe(struct device *dev, { unsigned long freq = 0, *pfreq = dev_get_platdata(dev); unsigned int val; + u8 mctrl_mask = 0; u32 uartclk = 0; int i, ret; struct sc16is7xx_port *s; @@ -1478,12 +1542,6 @@ static int sc16is7xx_probe(struct device *dev, SC16IS7XX_EFCR_RXDISABLE_BIT | SC16IS7XX_EFCR_TXDISABLE_BIT); - /* Use GPIO lines as modem status registers */ - if (devtype->has_mctrl) - sc16is7xx_port_write(&s->p[i].port, - SC16IS7XX_IOCONTROL_REG, - SC16IS7XX_IOCONTROL_MODEM_BIT); - /* Initialize kthread work structs */ kthread_init_work(&s->p[i].tx_work, sc16is7xx_tx_proc); kthread_init_work(&s->p[i].reg_work, sc16is7xx_reg_proc); @@ -1521,8 +1579,10 @@ static int sc16is7xx_probe(struct device *dev, s->p[u].irda_mode = true; } + mctrl_mask = sc16is7xx_setup_mctrl_ports(dev); + #ifdef CONFIG_GPIOLIB - ret = sc16is7xx_setup_gpio_chip(dev); + ret = sc16is7xx_setup_gpio_chip(dev, mctrl_mask); if (ret) goto out_thread; #endif @@ -1547,7 +1607,7 @@ static int sc16is7xx_probe(struct device *dev, return 0; #ifdef CONFIG_GPIOLIB - if (devtype->nr_gpio) + if (s->gpio_valid_mask) gpiochip_remove(&s->gpio); out_thread: @@ -1573,7 +1633,7 @@ static void sc16is7xx_remove(struct device *dev) int i; #ifdef CONFIG_GPIOLIB - if (s->devtype->nr_gpio) + if (s->gpio_valid_mask) gpiochip_remove(&s->gpio); #endif From patchwork Thu Jun 1 20:18:41 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 687864 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 30820C7EE32 for ; Thu, 1 Jun 2023 20:19:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232160AbjFAUTR (ORCPT ); Thu, 1 Jun 2023 16:19:17 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48334 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231883AbjFAUTF (ORCPT ); Thu, 1 Jun 2023 16:19:05 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9270318D; Thu, 1 Jun 2023 13:19:03 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=ZiPCnMO76qB2BYRsvuFD+LhH0HMktcgnm3k8GmGktA0=; b=gaQlY1Tpf826FLJhqZ0W/h8y3Y Q3pcsBMndgOTqToKTrhhmARqESXglDkRjHZogGUTT8eZAm4krxDGtMJbIhDTwZFrusXXAvICE6aTH VWndAG32nz4jnbEQDg/EZ0XEP+1NR1mDkswdczq99+Cp7LNbbMuY3vAJWKPMH279taXU=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:39204 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q4ol6-000686-8C; Thu, 01 Jun 2023 16:18:56 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , stable@vger.kernel.org, Lech Perczak Date: Thu, 1 Jun 2023 16:18:41 -0400 Message-Id: <20230601201844.3739926-7-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230601201844.3739926-1-hugo@hugovil.com> References: <20230601201844.3739926-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v6 6/9] serial: sc16is7xx: fix bug when first setting GPIO direction X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Hugo Villeneuve When configuring a pin as an output pin with a value of logic 0, we end up as having a value of logic 1 on the output pin. Setting a logic 0 a second time (or more) after that will correctly output a logic 0 on the output pin. By default, all GPIO pins are configured as inputs. When we enter sc16is7xx_gpio_direction_output() for the first time, we first set the desired value in IOSTATE, and then we configure the pin as an output. The datasheet states that writing to IOSTATE register will trigger a transfer of the value to the I/O pin configured as output, so if the pin is configured as an input, nothing will be transferred. Therefore, set the direction first in IODIR, and then set the desired value in IOSTATE. This is what is done in NXP application note AN10587. Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: Signed-off-by: Hugo Villeneuve Reviewed-by: Lech Perczak Tested-by: Lech Perczak --- drivers/tty/serial/sc16is7xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index ad6b9d613b33..2fa09baf28e3 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1340,9 +1340,18 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, state |= BIT(offset); else state &= ~BIT(offset); - sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state); + + /* + * If we write IOSTATE first, and then IODIR, the output value is not + * transferred to the corresponding I/O pin. + * The datasheet states that each register bit will be transferred to + * the corresponding I/O pin programmed as output when writing to + * IOSTATE. Therefore, configure direction first with IODIR, and then + * set value after with IOSTATE. + */ sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), BIT(offset)); + sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state); return 0; } From patchwork Thu Jun 1 20:18:42 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 688430 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7F2ADC7EE29 for ; Thu, 1 Jun 2023 20:19:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232248AbjFAUTT (ORCPT ); Thu, 1 Jun 2023 16:19:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48344 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231917AbjFAUTF (ORCPT ); Thu, 1 Jun 2023 16:19:05 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 528B1199; Thu, 1 Jun 2023 13:19:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:Content-Type:MIME-Version: References:In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Id:List-Help:List-Unsubscribe:List-Subscribe: List-Post:List-Owner:List-Archive; bh=Z3WZIzncTr6MCeVd4lJqIf8LqUrhJSqs0YEKHbqWmt4=; b=ewTtSx280ca34pgvpp2dulWLc7 tRAP34fe2jcuK/B/hLKKkfJKRb4m1s8wqymlOMzXUOG8HCHapT7XHO8vAxD4DF0Ku9twvAxGjSnjC XP4Bn5aMMAaj7HGCSh96iLiIcI22f4/tBE5ygVg/8EOHXk3fJETPZhNxq3lmbKwak96Y=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:39204 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q4ol7-000686-K5; Thu, 01 Jun 2023 16:18:58 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Lech Perczak Date: Thu, 1 Jun 2023 16:18:42 -0400 Message-Id: <20230601201844.3739926-8-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230601201844.3739926-1-hugo@hugovil.com> References: <20230601201844.3739926-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v6 7/9] serial: sc16is7xx: add call to get rs485 DT flags and properties X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Hugo Villeneuve Add call to uart_get_rs485_mode() to probe for RS485 flags and properties from device tree. Signed-off-by: Hugo Villeneuve Reviewed-by: Ilpo Järvinen Reviewed-by: Lech Perczak Tested-by: Lech Perczak --- drivers/tty/serial/sc16is7xx.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 2fa09baf28e3..388c1d490853 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1544,6 +1544,10 @@ static int sc16is7xx_probe(struct device *dev, goto out_ports; } + ret = uart_get_rs485_mode(&s->p[i].port); + if (ret) + goto out_ports; + /* Disable all interrupts */ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0); /* Disable TX/RX */ From patchwork Thu Jun 1 20:18:43 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 688431 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4273AC7EE2E for ; Thu, 1 Jun 2023 20:19:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231718AbjFAUTP (ORCPT ); Thu, 1 Jun 2023 16:19:15 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48332 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231856AbjFAUTF (ORCPT ); Thu, 1 Jun 2023 16:19:05 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5C908189; Thu, 1 Jun 2023 13:19:03 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=fISA+M83zRFEgKAdJUAq2HgGHBk9L99uymCON8uLsVo=; b=FYMQTKBjoNVaDM9a+tAIAyrw1X mMUS0palNJwjZcR42ck977uBOFvJQDnK8jSByhkWjnwB3/LIiTWmoupP6Tv/D6PX+I6QeHlgurJDm Nq5qkKQd3KXYkmNnFhMYy8f35yiJk7ynfq1vLE8mGSVlb+GhU+3CJ/tMSmAjAjMtuUuQ=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:39204 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q4ol8-000686-Qz; Thu, 01 Jun 2023 16:18:59 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , Lech Perczak Date: Thu, 1 Jun 2023 16:18:43 -0400 Message-Id: <20230601201844.3739926-9-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230601201844.3739926-1-hugo@hugovil.com> References: <20230601201844.3739926-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v6 8/9] serial: sc16is7xx: add post reset delay X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Hugo Villeneuve Make sure we wait at least 3us before initiating communication with the device after reset. Signed-off-by: Hugo Villeneuve Reviewed-by: Lech Perczak Tested-by: Lech Perczak --- drivers/tty/serial/sc16is7xx.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 388c1d490853..9b2d58023c55 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1521,6 +1521,12 @@ static int sc16is7xx_probe(struct device *dev, regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT, SC16IS7XX_IOCONTROL_SRESET_BIT); + /* + * After reset, the host must wait at least 3us before initializing a + * communication with the device. + */ + usleep_range(5, 10); + for (i = 0; i < devtype->nr_uart; ++i) { s->p[i].line = i; /* Initialize port data */ From patchwork Thu Jun 1 20:18:44 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 687863 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D4556C7EE3A for ; Thu, 1 Jun 2023 20:19:21 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232295AbjFAUTU (ORCPT ); Thu, 1 Jun 2023 16:19:20 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48508 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232067AbjFAUTN (ORCPT ); Thu, 1 Jun 2023 16:19:13 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8436BD1; Thu, 1 Jun 2023 13:19:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=Vpxb2SEuweBhIUfqr9sMJSgr1YIceBLIzWJb0gIKyDM=; b=BIUmMmAr9GatHdMUUcSz5PzXSd dsfinzY59MdfFVWTE+oEuxHNswWjlwG6DSsTg2Vmricbgb1eJeCzugwycHYrih9V0kTGraFAYXu4/ dh3Motr5UdhBFH1k6+PGsRZzOyK8uX7Xuf0skzZWwTmEyz0eZOdhJVQj5YCUWxPqGe3w=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:39204 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q4olA-000686-2c; Thu, 01 Jun 2023 16:19:00 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , Lech Perczak Date: Thu, 1 Jun 2023 16:18:44 -0400 Message-Id: <20230601201844.3739926-10-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230601201844.3739926-1-hugo@hugovil.com> References: <20230601201844.3739926-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v6 9/9] serial: sc16is7xx: improve comments about variants X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Hugo Villeneuve Replace 740/750/760 with generic terms like 74x/75x/76x to account for variants like 741, 752 and 762. Signed-off-by: Hugo Villeneuve Reviewed-by: Lech Perczak --- drivers/tty/serial/sc16is7xx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 9b2d58023c55..59338f5ca180 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -223,7 +223,7 @@ * trigger levels. Trigger levels from 4 characters to 60 characters are * available with a granularity of four. * - * When the trigger level setting in TLR is zero, the SC16IS740/750/760 uses the + * When the trigger level setting in TLR is zero, the SC16IS74x/75x/76x uses the * trigger level setting defined in FCR. If TLR has non-zero trigger level value * the trigger level defined in FCR is discarded. This applies to both transmit * FIFO and receive FIFO trigger level setting. @@ -234,7 +234,7 @@ #define SC16IS7XX_TLR_TX_TRIGGER(words) ((((words) / 4) & 0x0f) << 0) #define SC16IS7XX_TLR_RX_TRIGGER(words) ((((words) / 4) & 0x0f) << 4) -/* IOControl register bits (Only 750/760) */ +/* IOControl register bits (Only 75x/76x) */ #define SC16IS7XX_IOCONTROL_LATCH_BIT (1 << 0) /* Enable input latching */ #define SC16IS7XX_IOCONTROL_MODEM_A_BIT (1 << 1) /* Enable GPIO[7:4] as modem A pins */ #define SC16IS7XX_IOCONTROL_MODEM_B_BIT (1 << 2) /* Enable GPIO[3:0] as modem B pins */ @@ -249,9 +249,9 @@ #define SC16IS7XX_EFCR_RTS_INVERT_BIT (1 << 5) /* RTS output inversion */ #define SC16IS7XX_EFCR_IRDA_MODE_BIT (1 << 7) /* IrDA mode * 0 = rate upto 115.2 kbit/s - * - Only 750/760 + * - Only 75x/76x * 1 = rate upto 1.152 Mbit/s - * - Only 760 + * - Only 76x */ /* EFR register bits */