From patchwork Fri Jun 2 15:26:17 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 688668 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id DBE76C77B7A for ; Fri, 2 Jun 2023 15:26:44 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236584AbjFBP0n (ORCPT ); Fri, 2 Jun 2023 11:26:43 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41810 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235715AbjFBP0m (ORCPT ); Fri, 2 Jun 2023 11:26:42 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 67F4D1BB; Fri, 2 Jun 2023 08:26:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:Content-Type:MIME-Version: References:In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Id:List-Help:List-Unsubscribe:List-Subscribe: List-Post:List-Owner:List-Archive; bh=vlvSfJ7BB6pGJBxrOhJ5IMJLf95UIyksZ/69U1YnCu4=; b=bKChWXh4jkp3ScQwcUn5nZ+CEx OVkmEl5LRViMYgTLztidHjR/jn72t/IgFwBltYly5wbMs5ruLeb5Fk8lNHwzqFBCnbZPTrfHEfL7J J8ilXzfm69XjobFU+SWs/xoI3luVcwY2LZKai7CQjpKaTF59Byv5pfIDKczayLuqIucg=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:50948 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q56ff-0008Hq-Bd; Fri, 02 Jun 2023 11:26:31 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , stable@vger.kernel.org, =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Lech Perczak Date: Fri, 2 Jun 2023 11:26:17 -0400 Message-Id: <20230602152626.284324-2-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230602152626.284324-1-hugo@hugovil.com> References: <20230602152626.284324-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v7 1/9] serial: sc16is7xx: fix broken port 0 uart init X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org From: Hugo Villeneuve The sc16is7xx_config_rs485() function is called only for the second port (index 1, channel B), causing initialization problems for the first port. For the sc16is7xx driver, port->membase and port->mapbase are not set, and their default values are 0. And we set port->iobase to the device index. This means that when the first device is registered using the uart_add_one_port() function, the following values will be in the port structure: port->membase = 0 port->mapbase = 0 port->iobase = 0 Therefore, the function uart_configure_port() in serial_core.c will exit early because of the following check: /* * If there isn't a port here, don't do anything further. */ if (!port->iobase && !port->mapbase && !port->membase) return; Typically, I2C and SPI drivers do not set port->membase and port->mapbase. The max310x driver sets port->membase to ~0 (all ones). By implementing the same change in this driver, uart_configure_port() is now correctly executed for all ports. Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: # 6.1.x Signed-off-by: Hugo Villeneuve Reviewed-by: Ilpo Järvinen Reviewed-by: Lech Perczak Tested-by: Lech Perczak --- drivers/tty/serial/sc16is7xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index abad091baeea..faa51a58671f 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1436,6 +1436,7 @@ static int sc16is7xx_probe(struct device *dev, s->p[i].port.fifosize = SC16IS7XX_FIFO_SIZE; s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; s->p[i].port.iobase = i; + s->p[i].port.membase = (void __iomem *)~0; s->p[i].port.iotype = UPIO_PORT; s->p[i].port.uartclk = freq; s->p[i].port.rs485_config = sc16is7xx_config_rs485; From patchwork Fri Jun 2 15:26:18 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 688667 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id EC05AC83005 for ; Fri, 2 Jun 2023 15:26:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236615AbjFBP0o (ORCPT ); Fri, 2 Jun 2023 11:26:44 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41808 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234614AbjFBP0m (ORCPT ); Fri, 2 Jun 2023 11:26:42 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DB091E48; Fri, 2 Jun 2023 08:26:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=T/ybH+luXFJtRUNLsANdxNj5MlosRcBXIwuB3tKL/mQ=; b=mfUCMr5pnhOaMZd6Tjl11cca/Y +vzCLQNE7U1/zzQhoFUG4z43sad9XKUbj86/KTp5DTcdI54/0P76d8nptwHG2/uPiAFKjFOPTT3lz dmvtpr0Tgkura6XniRxx3zOrhLQkVi1cH7LJ+FM0Y3IsQYNmYbk9GEcoZYhTGddv3F+Y=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:50948 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q56fg-0008Hq-Jh; Fri, 02 Jun 2023 11:26:33 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , stable@vger.kernel.org, Lech Perczak Date: Fri, 2 Jun 2023 11:26:18 -0400 Message-Id: <20230602152626.284324-3-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230602152626.284324-1-hugo@hugovil.com> References: <20230602152626.284324-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v7 2/9] serial: sc16is7xx: mark IOCONTROL register as volatile X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org From: Hugo Villeneuve Bit SRESET (3) is cleared when a reset operation is completed. Having the IOCONTROL register as non-volatile will always read SRESET as 1, which is incorrect. Also, if IOCONTROL register is not a volatile register, the upcoming patch "serial: sc16is7xx: fix regression with GPIO configuration" doesn't work when setting some shared GPIO lines as modem control lines. Therefore mark IOCONTROL register as a volatile register. Cc: # 6.1.x Signed-off-by: Hugo Villeneuve Reviewed-by: Lech Perczak Tested-by: Lech Perczak --- drivers/tty/serial/sc16is7xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index faa51a58671f..0c903d44429c 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -488,6 +488,7 @@ static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) case SC16IS7XX_TXLVL_REG: case SC16IS7XX_RXLVL_REG: case SC16IS7XX_IOSTATE_REG: + case SC16IS7XX_IOCONTROL_REG: return true; default: break; From patchwork Fri Jun 2 15:26:21 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 688664 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id F3483C7EE39 for ; Fri, 2 Jun 2023 15:27:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236754AbjFBP1Q (ORCPT ); Fri, 2 Jun 2023 11:27:16 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41876 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236652AbjFBP0s (ORCPT ); Fri, 2 Jun 2023 11:26:48 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0D47DE51; Fri, 2 Jun 2023 08:26:47 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=etX1eReG3B/ARZ7SD1XT7kh2ByzRv1fad++pPUx0hY4=; b=JKL29oOdYC2HW/+7FoZA0EUav8 4WzsQ3YrXmeLiyxhvFKxuW/zsOMZAIkrF+iiJsiqVFxk4208WxqIX4V9K18DvCstc7EY5JHGQv6/d pgc/LTkZ+FdpOpPWJqnKMht0WX7i5k8HAk1Svc4GChZyolDwbMm0eluMMBwAN1/paT/0=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:50948 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q56fl-0008Hq-2s; Fri, 02 Jun 2023 11:26:38 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , stable@vger.kernel.org, Andy Shevchenko Date: Fri, 2 Jun 2023 11:26:21 -0400 Message-Id: <20230602152626.284324-6-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230602152626.284324-1-hugo@hugovil.com> References: <20230602152626.284324-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v7 5/9] serial: sc16is7xx: fix regression with GPIO configuration X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org From: Hugo Villeneuve Commit 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") and commit 21144bab4f11 ("sc16is7xx: Handle modem status lines") changed the function of the GPIOs pins to act as modem control lines without any possibility of selecting GPIO function. As a consequence, applications that depends on GPIO lines configured by default as GPIO pins no longer work as expected. Also, the change to select modem control lines function was done only for channel A of dual UART variants (752/762). This was not documented in the log message. Allow to specify GPIO or modem control line function in the device tree, and for each of the ports (A or B). Do so by using the new device-tree property named "modem-control-line-ports" (property added in separate patch). When registering GPIO chip controller, mask-out GPIO pins declared as modem control lines according to this new "modem-control-line-ports" DT property. Boards that need to have GPIOS configured as modem control lines should add that property to their device tree. Here is a list of boards using the sc16is7xx driver in their device tree and that may need to be modified: arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts mips/boot/dts/ingenic/cu1830-neo.dts mips/boot/dts/ingenic/cu1000-neo.dts Fixes: 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") Fixes: 21144bab4f11 ("sc16is7xx: Handle modem status lines") Cc: # 6.1.x: 35210b22 dt-bindings: sc16is7xx: Add property to change GPIO function Cc: # 6.1.x: 7d61ca47 serial: sc16is7xx: refactor GPIO controller registration Cc: # 6.1.x: 322470ed serial: sc16is7xx: mark IOCONTROL register as volatile Cc: # 6.1.x: a0077362 serial: sc16is7xx: fix broken port 0 uart init Cc: # 6.1.x Signed-off-by: Hugo Villeneuve Reviewed-by: Andy Shevchenko --- drivers/tty/serial/sc16is7xx.c | 103 ++++++++++++++++++++++++++------- 1 file changed, 82 insertions(+), 21 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 7d50674d2d0e..edc83f5f6340 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -236,7 +236,8 @@ /* IOControl register bits (Only 750/760) */ #define SC16IS7XX_IOCONTROL_LATCH_BIT (1 << 0) /* Enable input latching */ -#define SC16IS7XX_IOCONTROL_MODEM_BIT (1 << 1) /* Enable GPIO[7:4] as modem pins */ +#define SC16IS7XX_IOCONTROL_MODEM_A_BIT (1 << 1) /* Enable GPIO[7:4] as modem A pins */ +#define SC16IS7XX_IOCONTROL_MODEM_B_BIT (1 << 2) /* Enable GPIO[3:0] as modem B pins */ #define SC16IS7XX_IOCONTROL_SRESET_BIT (1 << 3) /* Software Reset */ /* EFCR register bits */ @@ -301,12 +302,12 @@ /* Misc definitions */ #define SC16IS7XX_FIFO_SIZE (64) #define SC16IS7XX_REG_SHIFT 2 +#define SC16IS7XX_GPIOS_PER_BANK 4 struct sc16is7xx_devtype { char name[10]; int nr_gpio; int nr_uart; - int has_mctrl; }; #define SC16IS7XX_RECONF_MD (1 << 0) @@ -336,6 +337,7 @@ struct sc16is7xx_port { struct clk *clk; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; + unsigned long gpio_valid_mask; #endif unsigned char buf[SC16IS7XX_FIFO_SIZE]; struct kthread_worker kworker; @@ -447,35 +449,30 @@ static const struct sc16is7xx_devtype sc16is74x_devtype = { .name = "SC16IS74X", .nr_gpio = 0, .nr_uart = 1, - .has_mctrl = 0, }; static const struct sc16is7xx_devtype sc16is750_devtype = { .name = "SC16IS750", - .nr_gpio = 4, + .nr_gpio = 8, .nr_uart = 1, - .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is752_devtype = { .name = "SC16IS752", - .nr_gpio = 0, + .nr_gpio = 8, .nr_uart = 2, - .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is760_devtype = { .name = "SC16IS760", - .nr_gpio = 4, + .nr_gpio = 8, .nr_uart = 1, - .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is762_devtype = { .name = "SC16IS762", - .nr_gpio = 0, + .nr_gpio = 8, .nr_uart = 2, - .has_mctrl = 1, }; static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) @@ -1350,16 +1347,45 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, return 0; } -static int sc16is7xx_setup_gpio_chip(struct device *dev) +static int sc16is7xx_gpio_init_valid_mask(struct gpio_chip *chip, + unsigned long *valid_mask, + unsigned int ngpios) +{ + struct sc16is7xx_port *s = gpiochip_get_data(chip); + + *valid_mask = s->gpio_valid_mask; + + return 0; +} + +static int sc16is7xx_setup_gpio_chip(struct device *dev, u8 mctrl_mask) { struct sc16is7xx_port *s = dev_get_drvdata(dev); if (!s->devtype->nr_gpio) return 0; + switch (mctrl_mask) { + case 0: + s->gpio_valid_mask = GENMASK(7, 0); + break; + case SC16IS7XX_IOCONTROL_MODEM_A_BIT: + s->gpio_valid_mask = GENMASK(3, 0); + break; + case SC16IS7XX_IOCONTROL_MODEM_B_BIT: + s->gpio_valid_mask = GENMASK(7, 4); + break; + default: + break; + } + + if (s->gpio_valid_mask == 0) + return 0; + s->gpio.owner = THIS_MODULE; s->gpio.parent = dev; s->gpio.label = dev_name(dev); + s->gpio.init_valid_mask = sc16is7xx_gpio_init_valid_mask; s->gpio.direction_input = sc16is7xx_gpio_direction_input; s->gpio.get = sc16is7xx_gpio_get; s->gpio.direction_output = sc16is7xx_gpio_direction_output; @@ -1371,6 +1397,44 @@ static int sc16is7xx_setup_gpio_chip(struct device *dev) } #endif +static u8 sc16is7xx_setup_mctrl_ports(struct device *dev) +{ + struct sc16is7xx_port *s = dev_get_drvdata(dev); + int i; + int ret; + int count; + u32 mctrl_port[2]; + u8 mctrl_mask; + + count = device_property_count_u32(dev, "nxp,modem-control-line-ports"); + if (count < 0 || count > ARRAY_SIZE(mctrl_port)) + return 0; + + ret = device_property_read_u32_array(dev, "nxp,modem-control-line-ports", + mctrl_port, count); + if (ret) + return 0; + + mctrl_mask = 0; + + for (i = 0; i < count; i++) { + /* Use GPIO lines as modem control lines */ + if (mctrl_port[i] == 0) + mctrl_mask |= SC16IS7XX_IOCONTROL_MODEM_A_BIT; + else if (mctrl_port[i] == 1) + mctrl_mask |= SC16IS7XX_IOCONTROL_MODEM_B_BIT; + } + + if (mctrl_mask) + regmap_update_bits( + s->regmap, + SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT, + SC16IS7XX_IOCONTROL_MODEM_A_BIT | + SC16IS7XX_IOCONTROL_MODEM_B_BIT, mctrl_mask); + + return mctrl_mask; +} + static const struct serial_rs485 sc16is7xx_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND, .delay_rts_before_send = 1, @@ -1383,6 +1447,7 @@ static int sc16is7xx_probe(struct device *dev, { unsigned long freq = 0, *pfreq = dev_get_platdata(dev); unsigned int val; + u8 mctrl_mask; u32 uartclk = 0; int i, ret; struct sc16is7xx_port *s; @@ -1478,12 +1543,6 @@ static int sc16is7xx_probe(struct device *dev, SC16IS7XX_EFCR_RXDISABLE_BIT | SC16IS7XX_EFCR_TXDISABLE_BIT); - /* Use GPIO lines as modem status registers */ - if (devtype->has_mctrl) - sc16is7xx_port_write(&s->p[i].port, - SC16IS7XX_IOCONTROL_REG, - SC16IS7XX_IOCONTROL_MODEM_BIT); - /* Initialize kthread work structs */ kthread_init_work(&s->p[i].tx_work, sc16is7xx_tx_proc); kthread_init_work(&s->p[i].reg_work, sc16is7xx_reg_proc); @@ -1521,8 +1580,10 @@ static int sc16is7xx_probe(struct device *dev, s->p[u].irda_mode = true; } + mctrl_mask = sc16is7xx_setup_mctrl_ports(dev); + #ifdef CONFIG_GPIOLIB - ret = sc16is7xx_setup_gpio_chip(dev); + ret = sc16is7xx_setup_gpio_chip(dev, mctrl_mask); if (ret) goto out_thread; #endif @@ -1547,7 +1608,7 @@ static int sc16is7xx_probe(struct device *dev, return 0; #ifdef CONFIG_GPIOLIB - if (devtype->nr_gpio) + if (s->gpio_valid_mask) gpiochip_remove(&s->gpio); out_thread: @@ -1573,7 +1634,7 @@ static void sc16is7xx_remove(struct device *dev) int i; #ifdef CONFIG_GPIOLIB - if (s->devtype->nr_gpio) + if (s->gpio_valid_mask) gpiochip_remove(&s->gpio); #endif From patchwork Fri Jun 2 15:26:23 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 688665 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CB19FC7EE2D for ; Fri, 2 Jun 2023 15:27:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236718AbjFBP1O (ORCPT ); Fri, 2 Jun 2023 11:27:14 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41922 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236644AbjFBP0r (ORCPT ); Fri, 2 Jun 2023 11:26:47 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id F06DD18D; Fri, 2 Jun 2023 08:26:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:Content-Type:MIME-Version: References:In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Id:List-Help:List-Unsubscribe:List-Subscribe: List-Post:List-Owner:List-Archive; bh=CszQL7eYvui36nayCd/uiEjw7JXAIliYcxjDYDSZAaU=; b=rEapo3bmJH3C3qHlVJEvbN/lFZ OgUuiuXkHGMrVTlcc2PVoBuosNExmQNtKjLYiqk7GUEKt4O8k1jGdvLlNd+ibNCiSLGSd3dEdkJiO T14Okn9uc/QT5U/AGa4D2TRJq9L95xf5K6zfXEf7mTW6JARsNs+pqmpCvQmIdBRLjpEU=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:50948 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q56fo-0008Hq-Hw; Fri, 02 Jun 2023 11:26:41 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Lech Perczak Date: Fri, 2 Jun 2023 11:26:23 -0400 Message-Id: <20230602152626.284324-8-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230602152626.284324-1-hugo@hugovil.com> References: <20230602152626.284324-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v7 7/9] serial: sc16is7xx: add call to get rs485 DT flags and properties X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org From: Hugo Villeneuve Add call to uart_get_rs485_mode() to probe for RS485 flags and properties from device tree. Signed-off-by: Hugo Villeneuve Reviewed-by: Ilpo Järvinen Reviewed-by: Lech Perczak Tested-by: Lech Perczak --- drivers/tty/serial/sc16is7xx.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 7a9b91f0c710..9eef7fcd8863 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1545,6 +1545,10 @@ static int sc16is7xx_probe(struct device *dev, goto out_ports; } + ret = uart_get_rs485_mode(&s->p[i].port); + if (ret) + goto out_ports; + /* Disable all interrupts */ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0); /* Disable TX/RX */