From patchwork Wed Nov 29 08:28:26 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 748943 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="fGtRWFp1" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 645D0C1; Wed, 29 Nov 2023 00:29:30 -0800 (PST) Received: from pps.filterd (m0279870.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AT4sIlI011615; Wed, 29 Nov 2023 08:28:53 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=hnbaBV7NRZsw8Qyg+8uzlhKy7+Qppv7x7UAEm8vuB9s=; b=fGtRWFp1fdHWgxcbaSJXjAXywrPdKU9r3noKg9pbDCiRf63Y+cbmA9KLWArZBgNIFLlH 8aujwY93jvbv05YX7BcB0avLlhBqp4Cn77aS34tZECyrHNa/Xmu1R7V3udu7gz6AdnHJ h3mKuKflieqwQXIKjKvXADe9CkB3t2RcgAdIoC+m6uqleaNiDrWruUACJSY+HQLN/11Y D/S3HWx0yw6E6kJxEAzi1nJvJhdXKPYFLARnOCG8kHtKpBdDg2dSGYDzBeJo4F+KCOEa PhHbnvLe3nkiI9lQKt83gSdnhmBr2FxSkpfBeCK/5YNLx6Zvjs8tZJP/F9eOlf/ZSf/a 5g== Received: from nasanppmta04.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3unfn4txxv-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 29 Nov 2023 08:28:53 +0000 Received: from pps.filterd (NASANPPMTA04.qualcomm.com [127.0.0.1]) by NASANPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AT8SpNx020758; Wed, 29 Nov 2023 08:28:51 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3unmew6x6d-1; Wed, 29 Nov 2023 08:28:51 +0000 Received: from NASANPPMTA04.qualcomm.com (NASANPPMTA04.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AT8Spn3020751; Wed, 29 Nov 2023 08:28:51 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3AT8So5K020745; Wed, 29 Nov 2023 08:28:51 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 0A45120A5D; Wed, 29 Nov 2023 00:28:50 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, cmd4@qualcomm.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Alim Akhtar , "James E.J. Bottomley" , Krzysztof Kozlowski , Stanley Chu , Andy Gross , Bjorn Andersson , Konrad Dybcio , Matthias Brugger , AngeloGioacchino Del Regno , Nitin Rawat , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Brian Masney , linux-arm-kernel@lists.infradead.org (moderated list:ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES), linux-samsung-soc@vger.kernel.org (open list:ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES), linux-kernel@vger.kernel.org (open list), linux-mediatek@lists.infradead.org (moderated list:UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER...) Subject: [PATCH v6 01/10] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params Date: Wed, 29 Nov 2023 00:28:26 -0800 Message-Id: <1701246516-11626-2-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> References: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: qhBpwFqSGvE2Y2KIttaciGfYJHsQ_hTp X-Proofpoint-GUID: qhBpwFqSGvE2Y2KIttaciGfYJHsQ_hTp X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-29_06,2023-11-27_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 spamscore=0 impostorscore=0 adultscore=0 clxscore=1015 suspectscore=0 priorityscore=1501 mlxscore=0 bulkscore=0 mlxlogscore=999 phishscore=0 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311290062 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: Structure ufs_dev_params is actually used in UFS host vendor drivers to declare host specific power mode parameters, like ufs__params or host_cap, which makes the code not very straightforward to read. Rename the structure ufs_dev_params to ufs_host_params and unify the declarations in all vendor drivers to host_params. In addition, rename the two functions ufshcd_init_pwr_dev_param() and ufshcd_get_pwr_dev_param() which work based on the ufs_host_params to ufshcd_init_host_params() and ufshcd_negotiate_pwr_params() respectively to avoid confusions. This change does not change any functionalities or logic. Acked-by: Andrew Halaney Reviewed-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam Signed-off-by: Can Guo --- drivers/ufs/host/ufs-exynos.c | 7 ++-- drivers/ufs/host/ufs-hisi.c | 11 +++---- drivers/ufs/host/ufs-mediatek.c | 12 +++---- drivers/ufs/host/ufs-qcom.c | 12 +++---- drivers/ufs/host/ufshcd-pltfrm.c | 69 ++++++++++++++++++++-------------------- drivers/ufs/host/ufshcd-pltfrm.h | 10 +++--- 6 files changed, 57 insertions(+), 64 deletions(-) diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c index 71bd6db..734d40f 100644 --- a/drivers/ufs/host/ufs-exynos.c +++ b/drivers/ufs/host/ufs-exynos.c @@ -765,7 +765,7 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, { struct exynos_ufs *ufs = ufshcd_get_variant(hba); struct phy *generic_phy = ufs->phy; - struct ufs_dev_params ufs_exynos_cap; + struct ufs_host_params host_params; int ret; if (!dev_req_params) { @@ -774,10 +774,9 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, goto out; } - ufshcd_init_pwr_dev_param(&ufs_exynos_cap); + ufshcd_init_host_params(&host_params); - ret = ufshcd_get_pwr_dev_param(&ufs_exynos_cap, - dev_max_params, dev_req_params); + ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); if (ret) { pr_err("%s: failed to determine capabilities\n", __func__); goto out; diff --git a/drivers/ufs/host/ufs-hisi.c b/drivers/ufs/host/ufs-hisi.c index 0229ac0..5ee73ff 100644 --- a/drivers/ufs/host/ufs-hisi.c +++ b/drivers/ufs/host/ufs-hisi.c @@ -293,9 +293,9 @@ static int ufs_hisi_link_startup_notify(struct ufs_hba *hba, return err; } -static void ufs_hisi_set_dev_cap(struct ufs_dev_params *hisi_param) +static void ufs_hisi_set_dev_cap(struct ufs_host_params *host_params) { - ufshcd_init_pwr_dev_param(hisi_param); + ufshcd_init_host_params(host_params); } static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba) @@ -365,7 +365,7 @@ static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_max_params, struct ufs_pa_layer_attr *dev_req_params) { - struct ufs_dev_params ufs_hisi_cap; + struct ufs_host_params host_params; int ret = 0; if (!dev_req_params) { @@ -377,9 +377,8 @@ static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: - ufs_hisi_set_dev_cap(&ufs_hisi_cap); - ret = ufshcd_get_pwr_dev_param(&ufs_hisi_cap, - dev_max_params, dev_req_params); + ufs_hisi_set_dev_cap(&host_params); + ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); if (ret) { dev_err(hba->dev, "%s: failed to determine capabilities\n", __func__); diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c index fc61790..776bca4 100644 --- a/drivers/ufs/host/ufs-mediatek.c +++ b/drivers/ufs/host/ufs-mediatek.c @@ -996,16 +996,14 @@ static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_req_params) { struct ufs_mtk_host *host = ufshcd_get_variant(hba); - struct ufs_dev_params host_cap; + struct ufs_host_params host_params; int ret; - ufshcd_init_pwr_dev_param(&host_cap); - host_cap.hs_rx_gear = UFS_HS_G5; - host_cap.hs_tx_gear = UFS_HS_G5; + ufshcd_init_host_params(&host_params); + host_params.hs_rx_gear = UFS_HS_G5; + host_params.hs_tx_gear = UFS_HS_G5; - ret = ufshcd_get_pwr_dev_param(&host_cap, - dev_max_params, - dev_req_params); + ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); if (ret) { pr_info("%s: failed to determine capabilities\n", __func__); diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 96cb8b5..197c5a5 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -898,7 +898,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_req_params) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); - struct ufs_dev_params ufs_qcom_cap; + struct ufs_host_params host_params; int ret = 0; if (!dev_req_params) { @@ -908,15 +908,13 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: - ufshcd_init_pwr_dev_param(&ufs_qcom_cap); - ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE; + ufshcd_init_host_params(&host_params); + host_params.hs_rate = UFS_QCOM_LIMIT_HS_RATE; /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ - ufs_qcom_cap.hs_tx_gear = ufs_qcom_cap.hs_rx_gear = ufs_qcom_get_hs_gear(hba); + host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba); - ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap, - dev_max_params, - dev_req_params); + ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); if (ret) { dev_err(hba->dev, "%s: failed to determine capabilities\n", __func__); diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c index da2558e..1633edc 100644 --- a/drivers/ufs/host/ufshcd-pltfrm.c +++ b/drivers/ufs/host/ufshcd-pltfrm.c @@ -285,61 +285,60 @@ static int ufshcd_parse_operating_points(struct ufs_hba *hba) } /** - * ufshcd_get_pwr_dev_param - get finally agreed attributes for - * power mode change - * @pltfrm_param: pointer to platform parameters + * ufshcd_negotiate_pwr_params - find power mode settings that are supported by + both the controller and the device + * @host_params: pointer to host parameters * @dev_max: pointer to device attributes * @agreed_pwr: returned agreed attributes * * Return: 0 on success, non-zero value on failure. */ -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, - const struct ufs_pa_layer_attr *dev_max, - struct ufs_pa_layer_attr *agreed_pwr) +int ufshcd_negotiate_pwr_params(const struct ufs_host_params *host_params, + const struct ufs_pa_layer_attr *dev_max, + struct ufs_pa_layer_attr *agreed_pwr) { - int min_pltfrm_gear; + int min_host_gear; int min_dev_gear; bool is_dev_sup_hs = false; - bool is_pltfrm_max_hs = false; + bool is_host_max_hs = false; if (dev_max->pwr_rx == FAST_MODE) is_dev_sup_hs = true; - if (pltfrm_param->desired_working_mode == UFS_HS_MODE) { - is_pltfrm_max_hs = true; - min_pltfrm_gear = min_t(u32, pltfrm_param->hs_rx_gear, - pltfrm_param->hs_tx_gear); + if (host_params->desired_working_mode == UFS_HS_MODE) { + is_host_max_hs = true; + min_host_gear = min_t(u32, host_params->hs_rx_gear, + host_params->hs_tx_gear); } else { - min_pltfrm_gear = min_t(u32, pltfrm_param->pwm_rx_gear, - pltfrm_param->pwm_tx_gear); + min_host_gear = min_t(u32, host_params->pwm_rx_gear, + host_params->pwm_tx_gear); } /* - * device doesn't support HS but - * pltfrm_param->desired_working_mode is HS, - * thus device and pltfrm_param don't agree + * device doesn't support HS but host_params->desired_working_mode is HS, + * thus device and host_params don't agree */ - if (!is_dev_sup_hs && is_pltfrm_max_hs) { + if (!is_dev_sup_hs && is_host_max_hs) { pr_info("%s: device doesn't support HS\n", __func__); return -ENOTSUPP; - } else if (is_dev_sup_hs && is_pltfrm_max_hs) { + } else if (is_dev_sup_hs && is_host_max_hs) { /* * since device supports HS, it supports FAST_MODE. - * since pltfrm_param->desired_working_mode is also HS + * since host_params->desired_working_mode is also HS * then final decision (FAST/FASTAUTO) is done according * to pltfrm_params as it is the restricting factor */ - agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_hs; + agreed_pwr->pwr_rx = host_params->rx_pwr_hs; agreed_pwr->pwr_tx = agreed_pwr->pwr_rx; } else { /* - * here pltfrm_param->desired_working_mode is PWM. + * here host_params->desired_working_mode is PWM. * it doesn't matter whether device supports HS or PWM, - * in both cases pltfrm_param->desired_working_mode will + * in both cases host_params->desired_working_mode will * determine the mode */ - agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_pwm; + agreed_pwr->pwr_rx = host_params->rx_pwr_pwm; agreed_pwr->pwr_tx = agreed_pwr->pwr_rx; } @@ -349,9 +348,9 @@ int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, * the same decision will be made for rx */ agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx, - pltfrm_param->tx_lanes); + host_params->tx_lanes); agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx, - pltfrm_param->rx_lanes); + host_params->rx_lanes); /* device maximum gear is the minimum between device rx and tx gears */ min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx); @@ -364,26 +363,26 @@ int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, * what is the gear, as it is the one that also decided previously what * pwr the device will be configured to. */ - if ((is_dev_sup_hs && is_pltfrm_max_hs) || - (!is_dev_sup_hs && !is_pltfrm_max_hs)) { + if ((is_dev_sup_hs && is_host_max_hs) || + (!is_dev_sup_hs && !is_host_max_hs)) { agreed_pwr->gear_rx = - min_t(u32, min_dev_gear, min_pltfrm_gear); + min_t(u32, min_dev_gear, min_host_gear); } else if (!is_dev_sup_hs) { agreed_pwr->gear_rx = min_dev_gear; } else { - agreed_pwr->gear_rx = min_pltfrm_gear; + agreed_pwr->gear_rx = min_host_gear; } agreed_pwr->gear_tx = agreed_pwr->gear_rx; - agreed_pwr->hs_rate = pltfrm_param->hs_rate; + agreed_pwr->hs_rate = host_params->hs_rate; return 0; } -EXPORT_SYMBOL_GPL(ufshcd_get_pwr_dev_param); +EXPORT_SYMBOL_GPL(ufshcd_negotiate_pwr_params); -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param) +void ufshcd_init_host_params(struct ufs_host_params *host_params) { - *dev_param = (struct ufs_dev_params){ + *host_params = (struct ufs_host_params){ .tx_lanes = UFS_LANE_2, .rx_lanes = UFS_LANE_2, .hs_rx_gear = UFS_HS_G3, @@ -398,7 +397,7 @@ void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param) .desired_working_mode = UFS_HS_MODE, }; } -EXPORT_SYMBOL_GPL(ufshcd_init_pwr_dev_param); +EXPORT_SYMBOL_GPL(ufshcd_init_host_params); /** * ufshcd_pltfrm_init - probe routine of the driver diff --git a/drivers/ufs/host/ufshcd-pltfrm.h b/drivers/ufs/host/ufshcd-pltfrm.h index a86a3ad..df387be 100644 --- a/drivers/ufs/host/ufshcd-pltfrm.h +++ b/drivers/ufs/host/ufshcd-pltfrm.h @@ -10,7 +10,7 @@ #define UFS_PWM_MODE 1 #define UFS_HS_MODE 2 -struct ufs_dev_params { +struct ufs_host_params { u32 pwm_rx_gear; /* pwm rx gear to work in */ u32 pwm_tx_gear; /* pwm tx gear to work in */ u32 hs_rx_gear; /* hs rx gear to work in */ @@ -25,10 +25,10 @@ struct ufs_dev_params { u32 desired_working_mode; }; -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *dev_param, - const struct ufs_pa_layer_attr *dev_max, - struct ufs_pa_layer_attr *agreed_pwr); -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param); +int ufshcd_negotiate_pwr_params(const struct ufs_host_params *host_params, + const struct ufs_pa_layer_attr *dev_max, + struct ufs_pa_layer_attr *agreed_pwr); +void ufshcd_init_host_params(struct ufs_host_params *host_params); int ufshcd_pltfrm_init(struct platform_device *pdev, const struct ufs_hba_variant_ops *vops); int ufshcd_populate_vreg(struct device *dev, const char *name, From patchwork Wed Nov 29 08:28:27 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 748456 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="jxRUkFNZ" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 263CA1BCB; Wed, 29 Nov 2023 00:29:15 -0800 (PST) Received: from pps.filterd (m0279864.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AT87TKZ015007; Wed, 29 Nov 2023 08:28:54 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=XXKLvo3XMl+H+NTDwg2NZExDkEPfW6/0ym+VBsHZItg=; b=jxRUkFNZSAKRoNKgmRTzaiwNcd7txOrY5BSkTdDiT4srhsssP6Bw0HVx0PGNSFCf/ARQ 6DBXA+Dg1c6C10g7MHZVrh5BDdftG0tcwEhai0p4cu7j5JHl6dPqdeoQhAqu4YF0k9bS zYc6x32+FybQpE9jTuXxg7xX/3UpNEX0UKiQPkHqPCvoVPQOeqYS6WjhhIU6L+lZ55TQ GT/Es7IydTjWqJrV42zHDJEtt0IQ6OhmFhHdEVIk5DPU4zlNxtrLpnFMaLllua1uNaGj ZLRLT7/16OZx5F1oMwNaV9dle98nse8l9FFLOe8f90O0xWUxjqlGawXqjOUqepJxLiXL jg== Received: from nasanppmta05.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3up1gt81bt-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 29 Nov 2023 08:28:54 +0000 Received: from pps.filterd (NASANPPMTA05.qualcomm.com [127.0.0.1]) by NASANPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AT8RF5u026164; Wed, 29 Nov 2023 08:28:53 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA05.qualcomm.com (PPS) with ESMTP id 3unmeuy51g-1; Wed, 29 Nov 2023 08:28:53 +0000 Received: from NASANPPMTA05.qualcomm.com (NASANPPMTA05.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AT8ScXT028464; Wed, 29 Nov 2023 08:28:53 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA05.qualcomm.com (PPS) with ESMTP id 3AT8SrER029022; Wed, 29 Nov 2023 08:28:53 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id E02D520A5D; Wed, 29 Nov 2023 00:28:52 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, cmd4@qualcomm.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v6 02/10] scsi: ufs: ufs-qcom: No need to set hs_rate after ufshcd_init_host_param() Date: Wed, 29 Nov 2023 00:28:27 -0800 Message-Id: <1701246516-11626-3-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> References: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: miQMxyRgJq2XOZ69EbmnhfxH2lW8JiF- X-Proofpoint-ORIG-GUID: miQMxyRgJq2XOZ69EbmnhfxH2lW8JiF- X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-29_06,2023-11-27_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 suspectscore=0 bulkscore=0 malwarescore=0 adultscore=0 spamscore=0 mlxscore=0 lowpriorityscore=0 clxscore=1015 phishscore=0 priorityscore=1501 impostorscore=0 mlxlogscore=999 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311290062 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: In ufs_qcom_pwr_change_notify(), host_params.hs_rate has been set to PA_HS_MODE_B by ufshcd_init_host_param(), hence remove the duplicated line of work. Meanwhile, removed the macro UFS_QCOM_LIMIT_HS_RATE as it is only used here. Reviewed-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam Signed-off-by: Can Guo Reviewed-by: Andrew Halaney --- drivers/ufs/host/ufs-qcom.c | 1 - drivers/ufs/host/ufs-qcom.h | 2 -- 2 files changed, 3 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 197c5a5..c21ff2c 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -909,7 +909,6 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: ufshcd_init_host_params(&host_params); - host_params.hs_rate = UFS_QCOM_LIMIT_HS_RATE; /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba); diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h index 9950a00..82cd143 100644 --- a/drivers/ufs/host/ufs-qcom.h +++ b/drivers/ufs/host/ufs-qcom.h @@ -27,8 +27,6 @@ #define SLOW 1 #define FAST 2 -#define UFS_QCOM_LIMIT_HS_RATE PA_HS_MODE_B - /* QCOM UFS host controller vendor specific registers */ enum { REG_UFS_SYS1CLK_1US = 0xC0, From patchwork Wed Nov 29 08:28:28 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 748947 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="FdHIO0ch" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2CB7F1BCC; Wed, 29 Nov 2023 00:29:15 -0800 (PST) Received: from pps.filterd (m0279872.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AT0c1wP026202; Wed, 29 Nov 2023 08:28:56 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=B1stBXweFHGLo0FZ562PYkOASJIgvjARx2einm+rVNQ=; b=FdHIO0chEOw0EhLnLC8oXoMku4SAEwNZKIXVEPTYykYBQmPE/nkij9gvroEG9Opb+cUy 7WTTOtNAiZ2KkmUn6tfcfWPti0TWzEwg208nolR8mf2kI10Pt67rCq/NuwBSQ4HYXebn ocITqoU5gjlaENLjLl4ZqZ9es5J0cOMHbVvP4c2z5wmPPupQWQpQOyiCuk500nGHCxA6 VnjcGEB+733xtHNX++DPih0NZgvV3Ayj0aU9QNgxJujEYv7ZxNxIthf92AMGma+sI+Ku 8MQhuO2XLeXsKLivQ9NhraglyhT0r9WXS5RF6VQvOiT1mK4A3plj16vJLES8HJWVP+Sa qg== Received: from nasanppmta03.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3unnpesndy-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 29 Nov 2023 08:28:56 +0000 Received: from pps.filterd (NASANPPMTA03.qualcomm.com [127.0.0.1]) by NASANPPMTA03.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AT8H9ST023384; Wed, 29 Nov 2023 08:28:55 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA03.qualcomm.com (PPS) with ESMTP id 3unmev6wy5-1; Wed, 29 Nov 2023 08:28:55 +0000 Received: from NASANPPMTA03.qualcomm.com (NASANPPMTA03.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AT8SsZO007540; Wed, 29 Nov 2023 08:28:55 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA03.qualcomm.com (PPS) with ESMTP id 3AT8Ssse007534; Wed, 29 Nov 2023 08:28:54 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 88EC120A5D; Wed, 29 Nov 2023 00:28:54 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, cmd4@qualcomm.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, "Bao D . Nguyen" , Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v6 03/10] scsi: ufs: ufs-qcom: Setup host power mode during init Date: Wed, 29 Nov 2023 00:28:28 -0800 Message-Id: <1701246516-11626-4-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> References: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: Hjbt9V35o9NguTUgbfLrfnroWd7AMMeq X-Proofpoint-ORIG-GUID: Hjbt9V35o9NguTUgbfLrfnroWd7AMMeq X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-29_06,2023-11-27_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 impostorscore=0 mlxscore=0 phishscore=0 mlxlogscore=999 priorityscore=1501 adultscore=0 clxscore=1015 bulkscore=0 malwarescore=0 suspectscore=0 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311290062 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: Setup host power mode and its limitations during UFS host driver init to avoid repetitive work during every power mode change. Acked-by: Andrew Halaney Reviewed-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam Co-developed-by: Bao D. Nguyen Signed-off-by: Bao D. Nguyen Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 21 ++++++++++++++------- drivers/ufs/host/ufs-qcom.h | 1 + 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index c21ff2c..9a90019 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -898,7 +898,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_req_params) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); - struct ufs_host_params host_params; + struct ufs_host_params *host_params = &host->host_params; int ret = 0; if (!dev_req_params) { @@ -908,12 +908,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: - ufshcd_init_host_params(&host_params); - - /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ - host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba); - - ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); + ret = ufshcd_negotiate_pwr_params(host_params, dev_max_params, dev_req_params); if (ret) { dev_err(hba->dev, "%s: failed to determine capabilities\n", __func__); @@ -1048,6 +1043,17 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; } +static void ufs_qcom_set_host_params(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + struct ufs_host_params *host_params = &host->host_params; + + ufshcd_init_host_params(host_params); + + /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ + host_params->hs_tx_gear = host_params->hs_rx_gear = ufs_qcom_get_hs_gear(hba); +} + static void ufs_qcom_set_caps(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); @@ -1272,6 +1278,7 @@ static int ufs_qcom_init(struct ufs_hba *hba) ufs_qcom_set_caps(hba); ufs_qcom_advertise_quirks(hba); + ufs_qcom_set_host_params(hba); err = ufs_qcom_ice_init(host); if (err) diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h index 82cd143..11419eb 100644 --- a/drivers/ufs/host/ufs-qcom.h +++ b/drivers/ufs/host/ufs-qcom.h @@ -238,6 +238,7 @@ struct ufs_qcom_host { struct gpio_desc *device_reset; + struct ufs_host_params host_params; u32 phy_gear; bool esi_enabled; From patchwork Wed Nov 29 08:28:29 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 748451 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="JhvOYyyv" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C2A6519BA; Wed, 29 Nov 2023 00:30:49 -0800 (PST) Received: from pps.filterd (m0279870.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AT5n8JS031359; Wed, 29 Nov 2023 08:28:57 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=/t4gc5j9UEoMHfbDfgzJBzMFpYLemKsT1fmy50U6WNg=; b=JhvOYyyvJiILf3JFLooegaNSZjWofjOwWtNs4jXmqdXfMapmJyA+pNHyJA5D9dBZLOhZ 7eFVDYNKS0hzUumq0hsE3f59JilG7G2pJ8nu4gj3EUvGa0SizQsMxQKms+m7OQUgzPBt +o5leANqoU1XJ3oYiSOa+C/o+n2rY7vX1RoyxrRGHG+BSwHSK2v8cGfWBfiJQshLCWxT FTPXMjoHG4Utm5ub09XKt8oWQ1x/FINAA4lQl8v6Y985hnjhNliXZKewwyEZ0Jr2jX3u U1+39EGefMgPXnHuoOuXjCF4k8f3ZN+tEI7kVas9OU9Jaa2mrVnXfTNjXGYXJ+z/CZw9 IA== Received: from nasanppmta04.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3unfn4txy2-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 29 Nov 2023 08:28:57 +0000 Received: from pps.filterd (NASANPPMTA04.qualcomm.com [127.0.0.1]) by NASANPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AT8JhR4007425; Wed, 29 Nov 2023 08:28:56 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3unmew6x70-1; Wed, 29 Nov 2023 08:28:56 +0000 Received: from NASANPPMTA04.qualcomm.com (NASANPPMTA04.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AT8Stx6020794; Wed, 29 Nov 2023 08:28:55 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3AT8StZh020789; Wed, 29 Nov 2023 08:28:55 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id E4B3520A5D; Wed, 29 Nov 2023 00:28:55 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, cmd4@qualcomm.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v6 04/10] scsi: ufs: ufs-qcom: Allow the first init start with the maximum supported gear Date: Wed, 29 Nov 2023 00:28:29 -0800 Message-Id: <1701246516-11626-5-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> References: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: atI3-P2PoFF9OQ-Ccz9jbhHRKNmAShp6 X-Proofpoint-GUID: atI3-P2PoFF9OQ-Ccz9jbhHRKNmAShp6 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-29_06,2023-11-27_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 spamscore=0 impostorscore=0 adultscore=0 clxscore=1015 suspectscore=0 priorityscore=1501 mlxscore=0 bulkscore=0 mlxlogscore=999 phishscore=0 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311290062 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: During host driver init, the phy_gear is set to the minimum supported gear (HS_G2). Then, during the first power mode change, the negotiated gear, say HS-G4, is updated to the phy_gear variable so that in the second init the updated phy_gear can be used to program the PHY. But the current code only allows update the phy_gear to a higher value. If one wants to start the first init with the maximum support gear, say HS-G4, the phy_gear is not updated to HS-G3 if the device only supports HS-G3. The original check added there is intend to make sure the phy_gear won't be updated when gear is scaled down (during clock scaling). Update the check so that one can start the first init with the maximum support gear without breaking the original fix by checking the ufshcd_state, that is, allow update to phy_gear only if power mode change is invoked from ufshcd_probe_hba(). This change is a preparation patch for the next patches in the same series. Signed-off-by: Can Guo Reviewed-by: Manivannan Sadhasivam --- drivers/ufs/host/ufs-qcom.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 9a90019..81056b9 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -916,11 +916,12 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, } /* - * Update phy_gear only when the gears are scaled to a higher value. This is - * because, the PHY gear settings are backwards compatible and we only need to - * change the PHY gear settings while scaling to higher gears. + * During UFS driver probe, always update the PHY gear to match the negotiated + * gear, so that, if quirk UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is enabled, + * the second init can program the optimal PHY settings. This allows one to start + * the first init with either the minimum or the maximum support gear. */ - if (dev_req_params->gear_tx > host->phy_gear) + if (hba->ufshcd_state == UFSHCD_STATE_RESET) host->phy_gear = dev_req_params->gear_tx; /* enable the device ref clock before changing to HS mode */ From patchwork Wed Nov 29 08:28:30 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 748944 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="HIsueYJK" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5905C19BF; Wed, 29 Nov 2023 00:29:25 -0800 (PST) Received: from pps.filterd (m0279863.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AT5dFME032070; Wed, 29 Nov 2023 08:28:58 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=OyKiuUDodWiYtj2DgO5yfQd7glArFtEh/Ov8j266V3Y=; b=HIsueYJKYv+axPX9VTOjf3kyM4RJeFFHS3K0J3pCmq5j3Mluf03qaJZTmKrs3VClX05H f6c+tsXv78HbTTjNC2IfeWke0zPTEo3KApcEqbr7Z4Z5xXQ12Y5jurVvDjOY6YpSAtgM KHYlkKknGdTgEAZnlOMuA4x6a5Cu7jK3VFQLeiRD2odFvxXWnsSDXf9PU3hfqWEp8jBN w5XGrw4JZXuNff+iwY9OEX433mCYXK3YiWFWUOV9HCqrNOkEathnbeqz18jhJ+gAYmof acHIZvC5b7FbhZzDzO+WYejewcRVgLcTdJiBzEEMYB1VfwWF59+CmeTBFikeC/eQNEqS RQ== Received: from nasanppmta04.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3undc5baq9-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 29 Nov 2023 08:28:58 +0000 Received: from pps.filterd (NASANPPMTA04.qualcomm.com [127.0.0.1]) by NASANPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AT8IFBf005688; Wed, 29 Nov 2023 08:28:57 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3unmew6x76-1; Wed, 29 Nov 2023 08:28:57 +0000 Received: from NASANPPMTA04.qualcomm.com (NASANPPMTA04.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AT8SveA020819; Wed, 29 Nov 2023 08:28:57 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3AT8SvP5020816; Wed, 29 Nov 2023 08:28:57 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 5ECE220A5D; Wed, 29 Nov 2023 00:28:57 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, cmd4@qualcomm.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v6 05/10] scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5 Date: Wed, 29 Nov 2023 00:28:30 -0800 Message-Id: <1701246516-11626-6-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> References: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 3qCnazcM-Tf4fmczyxLXzH6s33CoiQ3H X-Proofpoint-ORIG-GUID: 3qCnazcM-Tf4fmczyxLXzH6s33CoiQ3H X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-29_06,2023-11-27_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 adultscore=0 impostorscore=0 lowpriorityscore=0 malwarescore=0 bulkscore=0 spamscore=0 priorityscore=1501 mlxlogscore=800 mlxscore=0 suspectscore=0 clxscore=1015 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311290062 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: Qcom UFS hosts, with HW ver 5, can only support up to HS-G5 Rate-A due to HW limitations. If the HS-G5 PHY gear is used, update host_params->hs_rate to Rate-A, so that the subsequent power mode changes shall stick to Rate-A. Reviewed-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 81056b9..aca6199 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -442,9 +442,25 @@ static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba) static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); + struct ufs_host_params *host_params = &host->host_params; struct phy *phy = host->generic_phy; + enum phy_mode mode; int ret; + /* + * HW ver 5 can only support up to HS-G5 Rate-A due to HW limitations. + * If the HS-G5 PHY gear is used, update host_params->hs_rate to Rate-A, + * so that the subsequent power mode change shall stick to Rate-A. + */ + if (host->hw_ver.major == 0x5) { + if (host->phy_gear == UFS_HS_G5) + host_params->hs_rate = PA_HS_MODE_A; + else + host_params->hs_rate = PA_HS_MODE_B; + } + + mode = host_params->hs_rate == PA_HS_MODE_B ? PHY_MODE_UFS_HS_B : PHY_MODE_UFS_HS_A; + /* Reset UFS Host Controller and PHY */ ret = ufs_qcom_host_reset(hba); if (ret) @@ -459,7 +475,7 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) return ret; } - phy_set_mode_ext(phy, PHY_MODE_UFS_HS_B, host->phy_gear); + phy_set_mode_ext(phy, mode, host->phy_gear); /* power on phy - start serdes and phy's power and clocks */ ret = phy_power_on(phy); From patchwork Wed Nov 29 08:28:31 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 748454 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="iZNdTKEP" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C155E19B0; Wed, 29 Nov 2023 00:29:21 -0800 (PST) Received: from pps.filterd (m0279866.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AT5r1Iw009338; Wed, 29 Nov 2023 08:29:00 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=3qRh83pvQAgfIrcOIyvWFSSKh0f4DJmsl0ckPvcfu/M=; b=iZNdTKEPT00nAetVt31VgjTAuSIjrrnqlMj5NZyGWO31awV8UZb1xKqKb8Fpryk3FNJh EKzyptrtZFtrBoL4soWOq2d7mVgDDPhn6WXL4+IWx4eeg+Acee71shaNsZc7nLPn/TB9 fY4QhlCXBFpgvBAZ9j1+ajxexgq4dzKIDRNk7y0I55gYtIuF0aph0ZmUmsS1E5l3RXia 4iyYENEq1SF7CFcJ4ZcHDlaw01JGJgeUC4dUexnN21t1QSu4g9A23d05rjUIUNU2xd/w Vzx45h3z/0TaptrUqZkHfDu2I8aDj6BLzMSpgbK1fp7EteZUMK6fVe2hSNIiXctGvPwQ oA== Received: from nasanppmta02.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3unmra9s82-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 29 Nov 2023 08:29:00 +0000 Received: from pps.filterd (NASANPPMTA02.qualcomm.com [127.0.0.1]) by NASANPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AT8Sxmh027627; Wed, 29 Nov 2023 08:28:59 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3unmevpybn-1; Wed, 29 Nov 2023 08:28:59 +0000 Received: from NASANPPMTA02.qualcomm.com (NASANPPMTA02.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AT8I6Af011850; Wed, 29 Nov 2023 08:28:59 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3AT8Sw4E027620; Wed, 29 Nov 2023 08:28:59 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id D0F8620A5D; Wed, 29 Nov 2023 00:28:58 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, cmd4@qualcomm.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v6 06/10] scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 4 and newer Date: Wed, 29 Nov 2023 00:28:31 -0800 Message-Id: <1701246516-11626-7-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> References: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: Oahkjb8nFJ6UwpaLkvmqMj51nPRwZU-- X-Proofpoint-ORIG-GUID: Oahkjb8nFJ6UwpaLkvmqMj51nPRwZU-- X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-29_06,2023-11-27_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 impostorscore=0 malwarescore=0 priorityscore=1501 suspectscore=0 mlxscore=0 clxscore=1015 lowpriorityscore=0 bulkscore=0 adultscore=0 spamscore=0 phishscore=0 mlxlogscore=999 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311290062 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: Since HW ver 4, max HS gear can be get from UFS host controller's register, use the max HS gear as the initial PHY gear instead of UFS_HS_G2, so that we don't need to update the hard code for newer targets in future. Signed-off-by: Can Guo Reviewed-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam --- drivers/ufs/host/ufs-qcom.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index aca6199..30f4ca6 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -1060,6 +1060,20 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; } +static void ufs_qcom_set_phy_gear(struct ufs_qcom_host *host) +{ + struct ufs_host_params *host_params = &host->host_params; + + host->phy_gear = host_params->hs_tx_gear; + + /* + * Power up the PHY using the minimum supported gear (UFS_HS_G2). + * Switching to max gear will be performed during reinit if supported. + */ + if (host->hw_ver.major < 0x4) + host->phy_gear = UFS_HS_G2; +} + static void ufs_qcom_set_host_params(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); @@ -1296,6 +1310,7 @@ static int ufs_qcom_init(struct ufs_hba *hba) ufs_qcom_set_caps(hba); ufs_qcom_advertise_quirks(hba); ufs_qcom_set_host_params(hba); + ufs_qcom_set_phy_gear(host); err = ufs_qcom_ice_init(host); if (err) @@ -1313,12 +1328,6 @@ static int ufs_qcom_init(struct ufs_hba *hba) dev_warn(dev, "%s: failed to configure the testbus %d\n", __func__, err); - /* - * Power up the PHY using the minimum supported gear (UFS_HS_G2). - * Switching to max gear will be performed during reinit if supported. - */ - host->phy_gear = UFS_HS_G2; - return 0; out_variant_clear: From patchwork Wed Nov 29 08:28:32 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 748452 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="F4iysN7e" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A99EE1BDF; Wed, 29 Nov 2023 00:29:25 -0800 (PST) Received: from pps.filterd (m0279864.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AT88Ba8016672; Wed, 29 Nov 2023 08:29:02 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=aDSJwSs6iMbImWri4N3coaLXQnmXC0AhmJE6F48E1E0=; b=F4iysN7etTm0Cp4MrbpYfYtspHHy82GzONZO2zBCs2GOIPrRJvWSTbc2hA/SdCPpU2zs P9rT+un4VgEvqDFdZ3oC2NDffewMQxTP3R1Auz9o707UEe75dc7Q50oxtEocdmLRMc0M vEh0aOvKBjhhq0F6OsjdEecrxOB7L19ERwByVt9zDORxHqdL1R6nvJhH/dHnqIN5aeb0 6dJzBsBM2vtHprgAY4qr+ZQd+sgOX7Sw9wFm1oWqGuwbqvo5DSbCjBRf1uD8t3EZzLGf SHTyT3j5uDqBErJjWOeNr3xLdkIK1xYzSuO816lXvOaO57Xx18CtvmfiBDvn2Itzl3+Z UA== Received: from nasanppmta03.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3up1gt81c1-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 29 Nov 2023 08:29:02 +0000 Received: from pps.filterd (NASANPPMTA03.qualcomm.com [127.0.0.1]) by NASANPPMTA03.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AT8H9SU023384; Wed, 29 Nov 2023 08:29:01 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA03.qualcomm.com (PPS) with ESMTP id 3unmev6x03-1; Wed, 29 Nov 2023 08:29:01 +0000 Received: from NASANPPMTA03.qualcomm.com (NASANPPMTA03.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AT8SsZR007540; Wed, 29 Nov 2023 08:29:01 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA03.qualcomm.com (PPS) with ESMTP id 3AT8T0hA007604; Wed, 29 Nov 2023 08:29:01 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id CD2B320A5D; Wed, 29 Nov 2023 00:29:00 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, cmd4@qualcomm.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , Vinod Koul , Kishon Vijay Abraham I , Johan Hovold , Abel Vesa , Dmitry Baryshkov , linux-phy@lists.infradead.org (open list:GENERIC PHY FRAMEWORK), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v6 07/10] phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings Date: Wed, 29 Nov 2023 00:28:32 -0800 Message-Id: <1701246516-11626-8-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> References: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: JOANa4W06Kh39MWU-aXNHIGKP8sXDn6l X-Proofpoint-ORIG-GUID: JOANa4W06Kh39MWU-aXNHIGKP8sXDn6l X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-29_06,2023-11-27_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 suspectscore=0 bulkscore=0 malwarescore=0 adultscore=0 spamscore=0 mlxscore=0 lowpriorityscore=0 clxscore=1015 phishscore=0 priorityscore=1501 impostorscore=0 mlxlogscore=857 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311290062 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: The registers, which are being touched in current SM8550 UFS PHY settings, and the values being programmed are mainly the ones working for HS-G4 mode, meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings. However, even consider HS-G4 mode only, some of them are incorrect and some are missing. Rectify the HS-G4 PHY settings by strictly aligning with the SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings. Fixes: 1679bfef906f ("phy: qcom-qmp-ufs: Add SM8550 support") Reviewed-by: Dmitry Baryshkov Reviewed-by: Abel Vesa Reviewed-by: Manivannan Sadhasivam Signed-off-by: Can Guo --- .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 3 +++ drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 28 +++++++++++++++------- 2 files changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h index 15bcb4b..674f158 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h @@ -10,9 +10,12 @@ #define QSERDES_UFS_V6_TX_RES_CODE_LANE_RX 0x2c #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX 0x30 #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX 0x34 +#define QSERDES_UFS_V6_TX_LANE_MODE_1 0x7c +#define QSERDES_UFS_V6_TX_FR_DCC_CTRL 0x108 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10 +#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0xd4 #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 514fa14..2173418 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -763,22 +763,26 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x4c), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x99), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = { - QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x05), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2, 0x0c), - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2), @@ -801,6 +805,8 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), }; struct qmp_ufs_offsets { @@ -1296,6 +1302,10 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .pcs = sm8550_ufsphy_pcs, .pcs_num = ARRAY_SIZE(sm8550_ufsphy_pcs), }, + .tbls_hs_b = { + .serdes = sm8550_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, From patchwork Wed Nov 29 08:28:33 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 748453 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="dAeTGSwn" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9FBCB1BCE; Wed, 29 Nov 2023 00:29:23 -0800 (PST) Received: from pps.filterd (m0279866.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AT3tD6G015383; Wed, 29 Nov 2023 08:29:06 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=K1B7kj2XNmVnoOM8YhFEBTFobANE8LpQ0cUDtW6mEc4=; b=dAeTGSwn9Ug9qq3vUfViz4PBo4r1TMN1enb8FS4Dp79nymD6Y/FTRTHIWSsxwXZYtym1 tR3pYUigH80a/PbF4aFLsc1r68y+0wwH7gBMZMMJF+wQdfKyYnts85bm1VPPL+2CjxXt KBAPXC4MJ+b/+Fkv8Uth4waLmJA90rokjP0pAYsu6TL1ZvT/5yGnNMurHwIz4vpwqewY 1o6VS0X2lMUh1XfXf/80+Q3fZzIVVHTFiyb4jbAcROQNwcA+37fOQr1TYP6MabRqS88o Z8WdQVCJAl/m2ZGujD+/vr46Pux5F6MEQAB5vOi1hxun8e3LAhyqwmtZP+jJ0g0smIho 3g== Received: from nasanppmta04.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3unmra9s85-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 29 Nov 2023 08:29:05 +0000 Received: from pps.filterd (NASANPPMTA04.qualcomm.com [127.0.0.1]) by NASANPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AT8JhR5007425; Wed, 29 Nov 2023 08:29:04 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3unmew6x8w-1; Wed, 29 Nov 2023 08:29:04 +0000 Received: from NASANPPMTA04.qualcomm.com (NASANPPMTA04.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AT8JAjd006958; Wed, 29 Nov 2023 08:29:04 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3AT8T4AY021423; Wed, 29 Nov 2023 08:29:04 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 8663220A5D; Wed, 29 Nov 2023 00:29:04 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, cmd4@qualcomm.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , Vinod Koul , Kishon Vijay Abraham I , linux-phy@lists.infradead.org (open list:GENERIC PHY FRAMEWORK), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v6 08/10] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550 Date: Wed, 29 Nov 2023 00:28:33 -0800 Message-Id: <1701246516-11626-9-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> References: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 9-kfFBhsza5TGc2AqO9r2al7a2IpXcwI X-Proofpoint-ORIG-GUID: 9-kfFBhsza5TGc2AqO9r2al7a2IpXcwI X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-29_06,2023-11-27_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 impostorscore=0 malwarescore=0 priorityscore=1501 suspectscore=0 mlxscore=0 clxscore=1015 lowpriorityscore=0 bulkscore=0 adultscore=0 spamscore=0 phishscore=0 mlxlogscore=999 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311290062 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: On SM8550, two sets of UFS PHY settings are provided, one set is to support HS-G5, another set is to support HS-G4 and lower gears. The two sets of PHY settings are programming different values to different registers, mixing the two sets and/or overwriting one set with another set is definitely not blessed by UFS PHY designers. To add HS-G5 support for SM8550, split the two sets of PHY settings into their dedicated overlay tables, only the common parts of the two sets of PHY settings are left in the .tbls. Consider we are going to add even higher gear support in future, to avoid adding more tables with different names, rename the .tbls_hs_g4 and make it an array, a size of 2 is enough as of now. In this case, .tbls alone is not a complete set of PHY settings, so either tbls_hs_overlay[0] or tbls_hs_overlay[1] must be applied on top of the .tbls to become a complete set of PHY settings. Signed-off-by: Can Guo --- drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h | 2 + drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h | 2 + .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 9 ++ drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 170 ++++++++++++++++++--- 4 files changed, 163 insertions(+), 20 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h index c23d5e4..e563af5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h @@ -18,6 +18,7 @@ #define QPHY_V6_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060 #define QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074 #define QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0bc +#define QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY 0x12c #define QPHY_V6_PCS_UFS_DEBUG_BUS_CLKSEL 0x158 #define QPHY_V6_PCS_UFS_LINECFG_DISABLE 0x17c #define QPHY_V6_PCS_UFS_RX_MIN_HIBERN8_TIME 0x184 @@ -27,5 +28,6 @@ #define QPHY_V6_PCS_UFS_READY_STATUS 0x1a8 #define QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1 0x1f4 #define QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1 0x1fc +#define QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME 0x220 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h index f420f8f..ef392ce 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h @@ -56,6 +56,8 @@ #define QSERDES_V6_COM_SYS_CLK_CTRL 0xe4 #define QSERDES_V6_COM_SYSCLK_BUF_ENABLE 0xe8 #define QSERDES_V6_COM_PLL_IVCO 0xf4 +#define QSERDES_V6_COM_CMN_IETRIM 0xfc +#define QSERDES_V6_COM_CMN_IPTRIM 0x100 #define QSERDES_V6_COM_SYSCLK_EN_SEL 0x110 #define QSERDES_V6_COM_RESETSM_CNTRL 0x118 #define QSERDES_V6_COM_LOCK_CMP_EN 0x120 diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h index 674f158..48f31c8 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h @@ -15,8 +15,15 @@ #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10 +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4 0x24 +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4 0x54 #define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0xd4 +#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4 0xdc +#define QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4 0xf0 +#define QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS 0xf4 #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178 +#define QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x1bc +#define QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3 0x1c4 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3 0x214 @@ -28,6 +35,8 @@ #define QSERDES_UFS_V6_RX_MODE_RATE3_B5 0x264 #define QSERDES_UFS_V6_RX_MODE_RATE3_B8 0x270 #define QSERDES_UFS_V6_RX_MODE_RATE4_B3 0x280 +#define QSERDES_UFS_V6_RX_MODE_RATE4_B4 0x284 #define QSERDES_UFS_V6_RX_MODE_RATE4_B6 0x28c +#define QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL 0x2f8 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 2173418..7e5f1154 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -41,6 +41,8 @@ #define PHY_INIT_COMPLETE_TIMEOUT 10000 +#define NUM_OVERLAY 2 + struct qmp_phy_init_tbl { unsigned int offset; unsigned int val; @@ -754,15 +756,22 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11), QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00), QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c), QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), @@ -771,19 +780,24 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07), }; -static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { - QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IETRIM, 0x1b), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IPTRIM, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_tx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c), - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2), @@ -799,16 +813,45 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02), }; +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4, 0x04), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS, 0x07), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4, 0x02), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4, 0x06), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x08), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B3, 0xb9), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B4, 0x4f), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B6, 0xff), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL, 0x30), +}; + static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), - QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), }; +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY, 0x4f), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME, 0x9e), +}; + struct qmp_ufs_offsets { u16 serdes; u16 pcs; @@ -828,6 +871,8 @@ struct qmp_phy_cfg_tbls { int rx_num; const struct qmp_phy_init_tbl *pcs; int pcs_num; + /* Maximum supported Gear of this tbls */ + u32 max_gear; }; /* struct qmp_phy_cfg - per-PHY initialization config */ @@ -835,13 +880,15 @@ struct qmp_phy_cfg { int lanes; const struct qmp_ufs_offsets *offsets; + /* Maximum supported Gear of this config */ + u32 max_supported_gear; /* Main init sequence for PHY blocks - serdes, tx, rx, pcs */ const struct qmp_phy_cfg_tbls tbls; /* Additional sequence for HS Series B */ const struct qmp_phy_cfg_tbls tbls_hs_b; - /* Additional sequence for HS G4 */ - const struct qmp_phy_cfg_tbls tbls_hs_g4; + /* Additional sequence for different HS Gears */ + const struct qmp_phy_cfg_tbls tbls_hs_overlay[NUM_OVERLAY]; /* clock ids to be requested */ const char * const *clk_list; @@ -944,6 +991,7 @@ static const struct qmp_phy_cfg msm8996_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = msm8996_ufsphy_serdes, @@ -969,6 +1017,7 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -984,13 +1033,14 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), @@ -1003,6 +1053,7 @@ static const struct qmp_phy_cfg sc7280_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8150_ufsphy_serdes, @@ -1018,13 +1069,14 @@ static const struct qmp_phy_cfg sc7280_ufsphy_cfg = { .serdes = sm8150_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8250_ufsphy_hs_g4_tx, .tx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx), .rx = sc7280_ufsphy_hs_g4_rx, .rx_num = ARRAY_SIZE(sc7280_ufsphy_hs_g4_rx), .pcs = sm8150_ufsphy_hs_g4_pcs, .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), @@ -1037,6 +1089,7 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1052,13 +1105,14 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1071,6 +1125,7 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sdm845_ufsphy_serdes, @@ -1099,6 +1154,7 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sm6115_ufsphy_serdes, @@ -1127,6 +1183,7 @@ static const struct qmp_phy_cfg sm7150_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sdm845_ufsphy_serdes, @@ -1155,6 +1212,7 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8150_ufsphy_serdes, @@ -1170,13 +1228,14 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .serdes = sm8150_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8150_ufsphy_hs_g4_tx, .tx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_tx), .rx = sm8150_ufsphy_hs_g4_rx, .rx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_rx), .pcs = sm8150_ufsphy_hs_g4_pcs, .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1189,6 +1248,7 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8150_ufsphy_serdes, @@ -1204,13 +1264,14 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = { .serdes = sm8150_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8250_ufsphy_hs_g4_tx, .tx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx), .rx = sm8250_ufsphy_hs_g4_rx, .rx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_rx), .pcs = sm8150_ufsphy_hs_g4_pcs, .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1223,6 +1284,7 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1238,13 +1300,14 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1257,6 +1320,7 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1272,13 +1336,14 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), @@ -1291,6 +1356,7 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets_v6, + .max_supported_gear = UFS_HS_G5, .tbls = { .serdes = sm8550_ufsphy_serdes, @@ -1306,6 +1372,26 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .serdes = sm8550_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), }, + .tbls_hs_overlay[0] = { + .serdes = sm8550_ufsphy_g4_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_g4_serdes), + .tx = sm8550_ufsphy_g4_tx, + .tx_num = ARRAY_SIZE(sm8550_ufsphy_g4_tx), + .rx = sm8550_ufsphy_g4_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_g4_rx), + .pcs = sm8550_ufsphy_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, + }, + .tbls_hs_overlay[1] = { + .serdes = sm8550_ufsphy_g5_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_g5_serdes), + .rx = sm8550_ufsphy_g5_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_g5_rx), + .pcs = sm8550_ufsphy_g5_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_g5_pcs), + .max_gear = UFS_HS_G5, + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, @@ -1368,17 +1454,55 @@ static void qmp_ufs_pcs_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tbls qmp_ufs_configure(pcs, tbls->pcs, tbls->pcs_num); } +static int qmp_ufs_get_gear_overlay(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg) +{ + u32 max_gear, floor_max_gear = cfg->max_supported_gear; + int i = NUM_OVERLAY - 1; + int ret = -EINVAL; + + for (; i >= 0; i --) { + max_gear = cfg->tbls_hs_overlay[i].max_gear; + + if (max_gear == 0) + continue; + + /* Direct matching, bail */ + if (qmp->submode == max_gear) + return i; + + /* If no direct matching, the lowest gear is the best matching */ + if (max_gear < floor_max_gear) { + ret = i; + floor_max_gear = max_gear; + } + } + + return ret; +} + static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg) { + int i; + bool apply_overlay = false; + + i = qmp_ufs_get_gear_overlay(qmp, cfg); + if (i >= 0) + apply_overlay = true; + qmp_ufs_serdes_init(qmp, &cfg->tbls); + if (apply_overlay) + qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_overlay[i]); + if (qmp->mode == PHY_MODE_UFS_HS_B) qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_b); + qmp_ufs_lanes_init(qmp, &cfg->tbls); - if (qmp->submode == UFS_HS_G4) - qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_g4); + if (apply_overlay) + qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_overlay[i]); + qmp_ufs_pcs_init(qmp, &cfg->tbls); - if (qmp->submode == UFS_HS_G4) - qmp_ufs_pcs_init(qmp, &cfg->tbls_hs_g4); + if (apply_overlay) + qmp_ufs_pcs_init(qmp, &cfg->tbls_hs_overlay[i]); } static int qmp_ufs_com_init(struct qmp_ufs *qmp) @@ -1550,6 +1674,12 @@ static int qmp_ufs_disable(struct phy *phy) static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode) { struct qmp_ufs *qmp = phy_get_drvdata(phy); + const struct qmp_phy_cfg *cfg = qmp->cfg; + + if (submode > cfg->max_supported_gear || submode == 0) { + dev_err(qmp->dev, "Invalid PHY submode %d\n", submode); + return -EINVAL; + } qmp->mode = mode; qmp->submode = submode; From patchwork Wed Nov 29 08:28:34 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 748946 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="AsvC5fr6" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0273719B9; Wed, 29 Nov 2023 00:29:21 -0800 (PST) Received: from pps.filterd (m0279865.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AT4oxCQ019477; Wed, 29 Nov 2023 08:29:08 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=IOyf33US+gSCzelwMgTg6dIf2ThMvbvb70K94drusfs=; b=AsvC5fr62AVRUTkAqsoqLVV4m2yTjjuy3t4TNG0Rm52ebCXjfxx6dzWrzArcGA8rMzRx cF9CyiTZJO/0G8q3TiCXUo9BDfRZAC6j1ZJ5k2XAMiUC4rACdENM4jiDECffdTZOOmuC Lw2iM0566ciZpgt+Nt4sT+fARsYZzEkDRqyP/MLmYGIRO3Dv5QIQKwFyQfDGxhUxouxc fVF4q+epwRZBL1jN2BWkuNswoCNpRE/PNduEGrmZFARcV2Nshf/Ot7DedOYz7001vR2a k55BcRADQDjyqgK8aQqEiIkPQISWuNpQU0DrG3VoWe4z/3XsWI9fJS6lpbhpqQZVuR/S XA== Received: from nasanppmta02.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3unkent3e4-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 29 Nov 2023 08:29:07 +0000 Received: from pps.filterd (NASANPPMTA02.qualcomm.com [127.0.0.1]) by NASANPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AT8AdGQ032698; Wed, 29 Nov 2023 08:29:07 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3unmevpydm-1; Wed, 29 Nov 2023 08:29:07 +0000 Received: from NASANPPMTA02.qualcomm.com (NASANPPMTA02.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AT8RJcZ024746; Wed, 29 Nov 2023 08:29:07 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3AT8T6Ac027817; Wed, 29 Nov 2023 08:29:06 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 8EC7320A5D; Wed, 29 Nov 2023 00:29:06 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, cmd4@qualcomm.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v6 09/10] scsi: ufs: ufs-qcom: Check return value of phy_set_mode_ext() Date: Wed, 29 Nov 2023 00:28:34 -0800 Message-Id: <1701246516-11626-10-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> References: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: zncicgKQdt9qvqwxTCiyHAJ8v8bSW5mj X-Proofpoint-ORIG-GUID: zncicgKQdt9qvqwxTCiyHAJ8v8bSW5mj X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-29_06,2023-11-27_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 suspectscore=0 impostorscore=0 mlxscore=0 phishscore=0 spamscore=0 priorityscore=1501 bulkscore=0 mlxlogscore=999 lowpriorityscore=0 adultscore=0 clxscore=1015 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311290062 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: In ufs_qcom_power_up_sequence(), check return value of phy_set_mode_ext() and stop proceeding if phy_set_mode_ext() fails. Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 30f4ca6..9c0ebbc 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -475,7 +475,12 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) return ret; } - phy_set_mode_ext(phy, mode, host->phy_gear); + ret = phy_set_mode_ext(phy, mode, host->phy_gear); + if (ret) { + dev_err(hba->dev, "%s: phy set mode failed, ret = %d\n", + __func__, ret); + goto out_disable_phy; + } /* power on phy - start serdes and phy's power and clocks */ ret = phy_power_on(phy); From patchwork Wed Nov 29 08:28:35 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 748945 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="otA4sfo7" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 669851BC8; Wed, 29 Nov 2023 00:29:22 -0800 (PST) Received: from pps.filterd (m0279865.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AT4M26b026089; Wed, 29 Nov 2023 08:29:10 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=n3EXxuuZpecr97yadUS8Jc3s3y2WaE0HXsYi/kt7/X8=; b=otA4sfo77RHVplw+uyiP3Rdz+FekR5aNqLGs6u4NKhfDG6t9BoVWU6sYYyUb1oaViydZ xHSDFqA7rk5byAFRvEoWcACPHraAuBdCKceSisIZVR+seQUI+S4os4OnWK2S4ONjsOhX +qFAt8nV/oc4ncHjvRLv4qgJnsFA1K8unHLThA3gV8sWGMEQ7lAZ8nN9uHmhrI1PZkou FdYWFhrMWg4b3HLq8o/U8FWM7AhoVxWyS3B6cwRhEm6sR1/eyxBWPl8aFFzBmd0lqTmi GbfJK7tL4okUd2kWctU0CFUFDzTWoeslD5Y3nkJV8nJwMxhaRZY3d5CfYqtpbi+TqHjl vQ== Received: from nasanppmta04.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3unkent3e7-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 29 Nov 2023 08:29:09 +0000 Received: from pps.filterd (NASANPPMTA04.qualcomm.com [127.0.0.1]) by NASANPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AT8D5bG030537; Wed, 29 Nov 2023 08:29:08 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3unmew6x9s-1; Wed, 29 Nov 2023 08:29:08 +0000 Received: from NASANPPMTA04.qualcomm.com (NASANPPMTA04.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AT8T83w021502; Wed, 29 Nov 2023 08:29:08 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3AT8T8jC021500; Wed, 29 Nov 2023 08:29:08 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 45CAA20A5D; Wed, 29 Nov 2023 00:29:08 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, cmd4@qualcomm.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, "Bao D. Nguyen" , Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v6 10/10] scsi: ufs: ufs-qcom: Add support for UFS device version detection Date: Wed, 29 Nov 2023 00:28:35 -0800 Message-Id: <1701246516-11626-11-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> References: <1701246516-11626-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: SVGJBxBXVFheDgP5w9446gI_atSnZt-x X-Proofpoint-ORIG-GUID: SVGJBxBXVFheDgP5w9446gI_atSnZt-x X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-29_06,2023-11-27_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 suspectscore=0 impostorscore=0 mlxscore=0 phishscore=0 spamscore=0 priorityscore=1501 bulkscore=0 mlxlogscore=999 lowpriorityscore=0 adultscore=0 clxscore=1015 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311290062 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: From: "Bao D. Nguyen" A spare register in UFS host controller is used to indicate the UFS device version. The spare register is populated by bootloader for now, but in future it will be populated by HW automatically during link startup with its best efforts in any boot stages prior to Linux. During host driver init, read the spare register, if it is not populated with a UFS device version, go ahead with the dual init mechanism. If a UFS device version is in there, use the UFS device version together with host controller's HW version to decide the proper PHY gear which should be used to configure the UFS PHY without going through the second init. Signed-off-by: Bao D. Nguyen Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 23 ++++++++++++++++++----- drivers/ufs/host/ufs-qcom.h | 2 ++ 2 files changed, 20 insertions(+), 5 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 9c0ebbc..e94dea2 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -1068,15 +1068,28 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) static void ufs_qcom_set_phy_gear(struct ufs_qcom_host *host) { struct ufs_host_params *host_params = &host->host_params; + u32 val, dev_major = 0; host->phy_gear = host_params->hs_tx_gear; - /* - * Power up the PHY using the minimum supported gear (UFS_HS_G2). - * Switching to max gear will be performed during reinit if supported. - */ - if (host->hw_ver.major < 0x4) + if (host->hw_ver.major < 0x4) { + /* + * Power up the PHY using the minimum supported gear (UFS_HS_G2). + * Switching to max gear will be performed during reinit if supported. + */ host->phy_gear = UFS_HS_G2; + } else { + val = ufshcd_readl(host->hba, REG_UFS_DEBUG_SPARE_CFG); + dev_major = FIELD_GET(GENMASK(7, 4), val); + + /* UFS device version populated, no need to do init twice */ + if (dev_major != 0) + host->hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; + + /* For UFS 3.1 and older, apply HS-G4 PHY gear to save power */ + if (dev_major < 0x4 && dev_major > 0) + host->phy_gear = UFS_HS_G4; + } } static void ufs_qcom_set_host_params(struct ufs_hba *hba) diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h index 11419eb..d12fc5a 100644 --- a/drivers/ufs/host/ufs-qcom.h +++ b/drivers/ufs/host/ufs-qcom.h @@ -54,6 +54,8 @@ enum { UFS_AH8_CFG = 0xFC, REG_UFS_CFG3 = 0x271C, + + REG_UFS_DEBUG_SPARE_CFG = 0x284C, }; /* QCOM UFS host controller vendor specific debug registers */