From patchwork Thu Dec 28 15:15:42 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "larry.lai" X-Patchwork-Id: 760083 Received: from APC01-SG2-obe.outbound.protection.outlook.com (mail-sgaapc01on2134.outbound.protection.outlook.com [40.107.215.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 34F09DF4C; Thu, 28 Dec 2023 15:16:22 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=yunjingtech.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=yunjingtech.com ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=HKd9Am6X2N8nKDyiujL9zhit/H/NuCp/jSZztfdLu+3U40M/uFU1a+Lp1ZRhhydZuV0N7tblMssjnIhevXD9U3g6Pgp6N6XeflHrH7gwGOjIdfm6bZUcfJQGPmykBvv7933RXoWOs3GB1HicpF+W5p8vts+1q7PxwXlP6gZ67VMHcAkYDvqaRIRF1vgtTfgDwDkj09KUfESNVZbH8/xE/Cfy3gJ/4PybrJUVxiahGW0JJ4KcDst3tnWO+SbbYiMO8IAk3hScLfVpyEBX0/Zf8EfqcdpyIUoKJd7WIKn8dO//M6O7SyOM8jl1VXvAl0S3MgMh+yZSDZHSciMYQO/+BA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=mAcmYvLBZxnXY0EJukamCZSpBHFwkOuiAsawPPFGdFk=; b=XA34uwGNO+84RUlyY7F4gQ6/NED5sT2UqmDR866qzvuMsAdnr3OY7OCu+noA8VLB4OndS/poOZFPWdiGOEJwfjmW7QFzdl72MXqAHlslG0Xk+/B7Gtb7PCHSEDn+Bf+yd5p8UuvTh8uBSkyjYY4TVQT6FDfkHapXw2DLbbNhl8ZAXv/iJrsXIzH5AvoLGtHbbmZMn7b4eCB+Bw/dCLHCLampfLB/BL16j3T75ekngcFeXZNP2LJ7XqEf/9sYSfnG2o1Vv3xpLo62770+8PGqO5bsPW7Q06CMfdYDxbYI3Y/7HhAI4wKdVxA0oWt1ZBb+tla11LBGHJk02ViT55Y1qQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) by KL1PR06MB6650.apcprd06.prod.outlook.com (2603:1096:820:fc::9) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7113.26; Thu, 28 Dec 2023 15:16:17 +0000 Received: from SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::883b:97ce:6565:e5e]) by SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::883b:97ce:6565:e5e%4]) with mapi id 15.20.7135.019; Thu, 28 Dec 2023 15:16:16 +0000 From: "larry.lai" To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz, krzk@kernel.org Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, "larry.lai" , Gary Wang Subject: [PATCH V8 1/3] mfd: Add support for UP board CPLD/FPGA Date: Thu, 28 Dec 2023 23:15:42 +0800 Message-Id: <20231228151544.14408-2-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20231228151544.14408-1-larry.lai@yunjingtech.com> References: <20231228151544.14408-1-larry.lai@yunjingtech.com> X-ClientProxiedBy: SG2P153CA0039.APCP153.PROD.OUTLOOK.COM (2603:1096:4:c6::8) To SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) Precedence: bulk X-Mailing-List: linux-gpio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SEYPR06MB6507:EE_|KL1PR06MB6650:EE_ X-MS-Office365-Filtering-Correlation-Id: fcdeb73b-8ef7-44b7-4c4b-08dc07b7eff2 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SEYPR06MB6507.apcprd06.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230031)(366004)(136003)(396003)(39830400003)(346002)(376002)(230273577357003)(230173577357003)(230922051799003)(64100799003)(186009)(451199024)(1800799012)(38350700005)(86362001)(30864003)(2906002)(38100700002)(36756003)(41300700001)(66946007)(54906003)(66476007)(316002)(66556008)(83380400001)(6486002)(6506007)(52116002)(1076003)(26005)(478600001)(2616005)(6666004)(5660300002)(4326008)(8936002)(8676002)(6512007); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: fcdeb73b-8ef7-44b7-4c4b-08dc07b7eff2 X-MS-Exchange-CrossTenant-AuthSource: SEYPR06MB6507.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 28 Dec 2023 15:16:16.8702 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: vGE6PGZELqBf1rECBpTCGX46pixkYuWGJOz/2bb2SnrfZPx8eLv4MJhY8AcBlRcU2hqBx12yBvCw+TjH4twi1pagFMHHkLdOz1f3IctELmU= X-MS-Exchange-Transport-CrossTenantHeadersStamped: KL1PR06MB6650 The UP Squared board implements certain features (pin control, onboard LEDs or CEC) through an on-board CPLD/FPGA. This driver implements the line protocol to read and write registers from the FPGA through regmap. The register address map is also included. The UP Boards provide a few I/O pin headers (for both GPIO and functions), including a 40-pin Raspberry Pi compatible header. This patch implements the FPGA-based pin controller that manages direction and enable state for those header pins. Partial supported boards: * UP core + CREX * UP core + CRST02 Signed-off-by: Gary Wang Signed-off-by: larry.lai --- PATCH V7 -> PATCH V8 (1) Refer 2023/11/14 Andy Shevchenko review, cleaned up coding style and addressed review comments. PATCH V6 -> PATCH V7 (1) Refer 2023/09/15 Lee Jones review, cleaned up coding style and addressed review comments. PATCH V5 -> PATCH V6 (1) Fixed kernel test robot compiler warning. PATCH V4 -> PATCH V5 (1) Refer 2023/05/25 Lee Jones review, cleaned up coding style and addressed review comments. (2) Synchronizing upboard github to v1.0.5 tag. RFC 2023/04/25 -> PATCH V4 (1) Fixed kernel test robot compiler warning. (2) Remove mistakes with wrong Reviewed-by tags. RFC 2022/11/23 -> RFC 2023/04/25 (1) Refer 2022/12/08 Andy Shevchenko review, cleaned up coding style and addressed review comments. PATCH V3 -> RFC 2022/11/23: (1) Refer 2022/11/16 Lee Jones review, cleaned up coding style and addressed review comments. (2) Description on the UP Boards FPGA register read/write protocols PATCH V2 -> V3: (1) fixed kernel test robot compiler warning. PATCH V1 -> V2: (1) Synchronizing upboard github to rc2. (2) Refer 2022/10/31 Lee Jones review, fixed some of the issues. --- drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/upboard-fpga.c | 364 +++++++++++++++++++++++++++++++ include/linux/mfd/upboard-fpga.h | 59 +++++ 4 files changed, 436 insertions(+) create mode 100644 drivers/mfd/upboard-fpga.c create mode 100644 include/linux/mfd/upboard-fpga.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index abb58ab1a1a4..54b5ddf782e3 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2104,6 +2104,18 @@ config MFD_QCOM_PM8008 under it in the device tree. Additional drivers must be enabled in order to use the functionality of the device. +config MFD_UPBOARD_FPGA + tristate "Support for the Intel platform foundation kit UP board FPGA" + select MFD_CORE + depends on (X86 && ACPI) || COMPILE_TEST + help + Select this option to enable the AAEON UP and UP^2 on-board FPGA. + This is core driver for the UP board that implements certain (pin + control, onboard LEDs or CEC) through an on-board FPGA. + + To compile this driver as a module, choose M here: the module will be + called upboard-fpga. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 858cacf659d6..d9d10e3664f7 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -250,6 +250,7 @@ obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o obj-$(CONFIG_MFD_ALTERA_SYSMGR) += altera-sysmgr.o obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o +obj-$(CONFIG_MFD_UPBOARD_FPGA) += upboard-fpga.o obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o diff --git a/drivers/mfd/upboard-fpga.c b/drivers/mfd/upboard-fpga.c new file mode 100644 index 000000000000..03158025b57f --- /dev/null +++ b/drivers/mfd/upboard-fpga.c @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board multifunction device driver. + * CPLD provide more GPIO driving power, LEDs and pin mux function. + * HID AANT0F00 ~ AAANT0F04 in ACPI namespace. + * + * Copyright (c) AAEON. All rights reserved. + * + * Author: Gary Wang + */ + +#include +#include +#include +#include +#include +#include +#include + +#define ENABLE_DEVICE 1 + +#define AAEON_MANUFACTURER_ID 0x01 +#define SUPPORTED_FW_MAJOR 0x0 +#define MENUFACTURER_ID_MASK GENMASK(7, 0) + +#define FIRMWARE_ID_BUILD_OFFSET 12 +#define FIRMWARE_ID_MAJOR_OFFSET 8 +#define FIRMWARE_ID_MINOR_OFFSET 4 +#define FIRMWARE_ID_PATCH_OFFSET 0 +#define FIRMWARE_ID_MASK GENMASK(3, 0) + +/* + * read CPLD register on custom protocol + * send clock and addr bit in strobe and datain pins then read from dataout pin + */ +static int upboard_cpld_read(void *context, unsigned int reg, unsigned int *val) +{ + struct upboard_fpga * const fpga = context; + int i; + + /* clear to start new transcation */ + gpiod_set_value(fpga->clear_gpio, 0); + gpiod_set_value(fpga->clear_gpio, 1); + + reg |= UPFPGA_READ_FLAG; + + /* send clock and data from strobe & datain */ + for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 0); + gpiod_set_value(fpga->datain_gpio, !!(reg & BIT(i))); + gpiod_set_value(fpga->strobe_gpio, 1); + } + + gpiod_set_value(fpga->strobe_gpio, 0); + *val = 0; + + /* read from dataout */ + for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 1); + gpiod_set_value(fpga->strobe_gpio, 0); + *val |= gpiod_get_value(fpga->dataout_gpio) << i; + } + + gpiod_set_value(fpga->strobe_gpio, 1); + + return 0; +} + +/* + * write CPLD register on custom protocol + * send clock and addr bit in strobe and datain pins then write to datain pin + */ +static int upboard_cpld_write(void *context, unsigned int reg, unsigned int val) +{ + struct upboard_fpga * const fpga = context; + int i; + + /* clear to start new transcation */ + gpiod_set_value(fpga->clear_gpio, 0); + gpiod_set_value(fpga->clear_gpio, 1); + + /* send clock and data from strobe & datain */ + for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 0); + gpiod_set_value(fpga->datain_gpio, !!(reg & BIT(i))); + gpiod_set_value(fpga->strobe_gpio, 1); + } + + gpiod_set_value(fpga->strobe_gpio, 0); + + /* write to datain pin */ + for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) { + gpiod_set_value(fpga->datain_gpio, !!(val & BIT(i))); + gpiod_set_value(fpga->strobe_gpio, 1); + gpiod_set_value(fpga->strobe_gpio, 0); + } + + gpiod_set_value(fpga->strobe_gpio, 1); + + return 0; +} + +static const struct regmap_range upboard_up_readable_ranges[] = { + regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID), + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1), +}; + +static const struct regmap_range upboard_up_writable_ranges[] = { + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1), +}; + +static const struct regmap_access_table upboard_up_readable_table = { + .yes_ranges = upboard_up_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up_readable_ranges), +}; + +static const struct regmap_access_table upboard_up_writable_table = { + .yes_ranges = upboard_up_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up_writable_ranges), +}; + +static struct regmap_config upboard_up_regmap_config = { + .reg_bits = UPFPGA_ADDRESS_SIZE, + .val_bits = UPFPGA_REGISTER_SIZE, + .max_register = UPFPGA_REG_MAX, + .reg_read = upboard_cpld_read, + .reg_write = upboard_cpld_write, + .fast_io = false, + .cache_type = REGCACHE_NONE, + .rd_table = &upboard_up_readable_table, + .wr_table = &upboard_up_writable_table, +}; + +static struct upboard_led_data upboard_gpio_led_data[] = { + { .bit = 0, .colour = "gpio" }, +}; + +/* 3 LEDs controlled by CPLD */ +static struct upboard_led_data upboard_up_led_data[] = { + { .bit = 0, .colour = "yellow" }, + { .bit = 1, .colour = "green" }, + { .bit = 2, .colour = "red" }, +}; + +static const struct mfd_cell upboard_up_mfd_cells[] = { + MFD_CELL_NAME("upboard-pinctrl"), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[0], + sizeof(*upboard_up_led_data), 0), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[1], + sizeof(*upboard_up_led_data), 1), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[2], + sizeof(*upboard_up_led_data), 2), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_gpio_led_data[0], + sizeof(*upboard_gpio_led_data), 0), +}; + +static const struct upboard_fpga_data upboard_up_fpga_data = { + .cpld_config = &upboard_up_regmap_config, + .cells = upboard_up_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up_mfd_cells), +}; + +/* UP^2 board */ +static const struct regmap_range upboard_up2_readable_ranges[] = { + regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID), + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1), + regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2), +}; + +static const struct regmap_range upboard_up2_writable_ranges[] = { + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1), + regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2), +}; + +static const struct regmap_access_table upboard_up2_readable_table = { + .yes_ranges = upboard_up2_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up2_readable_ranges), +}; + +static const struct regmap_access_table upboard_up2_writable_table = { + .yes_ranges = upboard_up2_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up2_writable_ranges), +}; + +static struct regmap_config upboard_up2_regmap_config = { + .reg_bits = UPFPGA_ADDRESS_SIZE, + .val_bits = UPFPGA_REGISTER_SIZE, + .max_register = UPFPGA_REG_MAX, + .reg_read = upboard_cpld_read, + .reg_write = upboard_cpld_write, + .fast_io = false, + .cache_type = REGCACHE_NONE, + .rd_table = &upboard_up2_readable_table, + .wr_table = &upboard_up2_writable_table, +}; + +static struct upboard_led_data upboard_up2_led_data[] = { + { .bit = 0, .colour = "blue" }, + { .bit = 1, .colour = "yellow" }, + { .bit = 2, .colour = "green" }, + { .bit = 3, .colour = "red" }, +}; + +static const struct mfd_cell upboard_up2_mfd_cells[] = { + MFD_CELL_NAME("upboard-pinctrl"), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[0], + sizeof(*upboard_up2_led_data), 0), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[1], + sizeof(*upboard_up2_led_data), 1), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[2], + sizeof(*upboard_up2_led_data), 2), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[3], + sizeof(*upboard_up2_led_data), 3), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_gpio_led_data[0], + sizeof(*upboard_gpio_led_data), 0), +}; + +static const struct upboard_fpga_data upboard_up2_fpga_data = { + .cpld_config = &upboard_up2_regmap_config, + .cells = upboard_up2_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up2_mfd_cells), +}; + +/* UP-CREX carrier board for UP Core */ + +/* same MAXV config as UP1 (proto2 release) */ +#define upboard_upcore_crex_fpga_data upboard_up_fpga_data + +/* UP-CRST02 carrier board for UP Core */ + +/* same MAX10 config as UP2, but same LED cells as UP1 */ +static const struct upboard_fpga_data upboard_upcore_crst02_fpga_data = { + .cpld_config = &upboard_up2_regmap_config, + .cells = upboard_up_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up_mfd_cells), +}; + +static int upboard_cpld_gpio_init(struct upboard_fpga *fpga) +{ + fpga->enable_gpio = devm_gpiod_get(fpga->dev, "enable", GPIOD_ASIS); + if (IS_ERR(fpga->enable_gpio)) + return PTR_ERR(fpga->enable_gpio); + + fpga->clear_gpio = devm_gpiod_get(fpga->dev, "clear", GPIOD_OUT_LOW); + if (IS_ERR(fpga->clear_gpio)) + return PTR_ERR(fpga->clear_gpio); + + fpga->strobe_gpio = devm_gpiod_get(fpga->dev, "strobe", GPIOD_OUT_LOW); + if (IS_ERR(fpga->strobe_gpio)) + return PTR_ERR(fpga->strobe_gpio); + + fpga->datain_gpio = devm_gpiod_get(fpga->dev, "datain", GPIOD_OUT_LOW); + if (IS_ERR(fpga->datain_gpio)) + return PTR_ERR(fpga->datain_gpio); + + fpga->dataout_gpio = devm_gpiod_get(fpga->dev, "dataout", GPIOD_IN); + if (IS_ERR(fpga->dataout_gpio)) + return PTR_ERR(fpga->dataout_gpio); + + gpiod_set_value(fpga->enable_gpio, ENABLE_DEVICE); + + return 0; +} + +/* This function is for debugging with user for showing firmware information. */ +static int upboard_fpga_verify_device(struct upboard_fpga *fpga) +{ + unsigned int platform_id, manufacturer_id; + unsigned int firmware_id, build, major, minor, patch; + int ret; + + ret = regmap_read(fpga->regmap, UPFPGA_REG_PLATFORM_ID, &platform_id); + if (ret) + return ret; + + manufacturer_id = platform_id & MENUFACTURER_ID_MASK; + if (manufacturer_id != AAEON_MANUFACTURER_ID) { + dev_err(fpga->dev, + "Manufacturer ID 0x%02x not supported\n", + manufacturer_id); + + return -ENODEV; + } + + ret = regmap_read(fpga->regmap, UPFPGA_REG_FIRMWARE_ID, &firmware_id); + if (ret) + return ret; + + build = (firmware_id >> FIRMWARE_ID_BUILD_OFFSET) & FIRMWARE_ID_MASK; + major = (firmware_id >> FIRMWARE_ID_MAJOR_OFFSET) & FIRMWARE_ID_MASK; + minor = (firmware_id >> FIRMWARE_ID_MINOR_OFFSET) & FIRMWARE_ID_MASK; + patch = (firmware_id >> FIRMWARE_ID_PATCH_OFFSET) & FIRMWARE_ID_MASK; + + if (major != SUPPORTED_FW_MAJOR) { + dev_err(fpga->dev, "Manufacturer ID 0x%02x not supported\n", build); + + return -ENODEV; + } + + dev_info(fpga->dev, "Compatible FPGA FW v%u.%u.%u build 0x%02x", + major, minor, patch, build); + + return 0; +} + +static const struct acpi_device_id upboard_fpga_acpi_match[] = { + { "AANT0F00", (kernel_ulong_t)&upboard_up_fpga_data }, + { "AANT0F01", (kernel_ulong_t)&upboard_up2_fpga_data }, + { "AANT0F02", (kernel_ulong_t)&upboard_upcore_crex_fpga_data }, + { "AANT0F03", (kernel_ulong_t)&upboard_upcore_crst02_fpga_data }, + { "AANT0F04", (kernel_ulong_t)&upboard_up_fpga_data }, + { } +}; +MODULE_DEVICE_TABLE(acpi, upboard_fpga_acpi_match); + +static int upboard_fpga_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct upboard_fpga *ddata; + int ret; + + ddata = devm_kzalloc(dev, sizeof(ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + ddata->fpga_data = device_get_match_data(dev); + if (!ddata->fpga_data) + return -ENODEV; + + platform_set_drvdata(pdev, ddata); + ddata->dev = dev; + ddata->regmap = devm_regmap_init(dev, NULL, ddata, ddata->fpga_data->cpld_config); + if (IS_ERR(ddata->regmap)) + return PTR_ERR(ddata->regmap); + + ret = upboard_cpld_gpio_init(ddata); + if (ret) { + /* Not FPGA firmware, abort FPGA GPIO initialize process */ + dev_warn(dev, "Failed to initialize CPLD common GPIOs: %d", ret); + } else { + upboard_fpga_verify_device(ddata); + } + + return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, + ddata->fpga_data->cells, + ddata->fpga_data->ncells, + NULL, 0, NULL); +} + +static struct platform_driver upboard_fpga_driver = { + .driver = { + .name = "upboard-cpld", + .acpi_match_table = upboard_fpga_acpi_match, + }, +}; +module_platform_driver_probe(upboard_fpga_driver, upboard_fpga_probe); + +MODULE_AUTHOR("Gary Wang "); +MODULE_DESCRIPTION("UP Board CPLD/FPGA driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/upboard-fpga.h b/include/linux/mfd/upboard-fpga.h new file mode 100644 index 000000000000..b25bf02e79aa --- /dev/null +++ b/include/linux/mfd/upboard-fpga.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * UP Board CPLD/FPGA driver + * + * Copyright (c) AAEON. All rights reserved. + * + * Author: Gary Wang + */ + +#ifndef __MFD_UPBOARD_FPGA_H +#define __MFD_UPBOARD_FPGA_H + +/* CPLD/FPGA protocol version */ +#define UPFPGA_PROTOCOL_V1_HRV 1 +#define UPFPGA_PROTOCOL_V2_HRV 2 + +#define UPFPGA_ADDRESS_SIZE 7 +#define UPFPGA_REGISTER_SIZE 16 + +#define UPFPGA_READ_FLAG BIT(UPFPGA_ADDRESS_SIZE) + +enum upboard_fpgareg { + UPFPGA_REG_PLATFORM_ID = 0x10, + UPFPGA_REG_FIRMWARE_ID = 0x11, + UPFPGA_REG_FUNC_EN0 = 0x20, + UPFPGA_REG_FUNC_EN1 = 0x21, + UPFPGA_REG_GPIO_EN0 = 0x30, + UPFPGA_REG_GPIO_EN1 = 0x31, + UPFPGA_REG_GPIO_EN2 = 0x32, + UPFPGA_REG_GPIO_DIR0 = 0x40, + UPFPGA_REG_GPIO_DIR1 = 0x41, + UPFPGA_REG_GPIO_DIR2 = 0x42, + UPFPGA_REG_MAX +}; + +struct upboard_fpga_data { + struct regmap_config *cpld_config; + const struct mfd_cell *cells; + size_t ncells; +}; + +struct upboard_fpga { + struct device *dev; + struct regmap *regmap; + struct gpio_desc *enable_gpio; + struct gpio_desc *reset_gpio; + struct gpio_desc *clear_gpio; + struct gpio_desc *strobe_gpio; + struct gpio_desc *datain_gpio; + struct gpio_desc *dataout_gpio; + const struct upboard_fpga_data *fpga_data; +}; + +struct upboard_led_data { + unsigned int bit; + const char *colour; +}; + +#endif /* __MFD_UPBOARD_FPGA_H */ From patchwork Thu Dec 28 15:15:43 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "larry.lai" X-Patchwork-Id: 758684 Received: from APC01-SG2-obe.outbound.protection.outlook.com (mail-sgaapc01on2134.outbound.protection.outlook.com [40.107.215.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id BF5CEF51A; Thu, 28 Dec 2023 15:16:24 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=yunjingtech.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=yunjingtech.com ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=J+bxVGGt9MTy+iB3hD5zwl0ByCZRjU0x/btuIFRJEO8sl60ZRQMGcugxV+/G26/dG2Iwt+X407dE+ky1yUh5nySLcWE6irMlDpiIxrfgcCEqJaqUTA1jq4TK47OYlt3L97xG5dotPyUJozoMjpStGxJXAplwBam/b2C0DxB74HYZPQBm4JT4bH3Uu6hpELZ0ajLQT+Im9zwkYHDEvsOoyqG88FTAYtGvPFkoM2S5BEol3yN+w9zSGTxWzERl77Gf3vZ/csNIK2ZZjvKKjASBuyjJMBvZWxyMmo7hMFVqhudBpbi1jWrQuV8sYWR/rKquMPuOEIIEo880Y5dD6fiLZA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=OexX29tKg/18LKwOaoK2Wx1u/+gQS5retHWX6bM3ws8=; b=Qwt89DCfsUiL0fP4DlHzKJ1Ny6Wov46+Pv4sb1mRpT/95YGX6XtMKsBsCMoXcwwboGg59jn8MORcK6TgQYfAX/vzB2J/XR3lBlZbC95lVD9xvDRTVNtUjMiovy4TGOzvIofpX4HdOKyAH6Ue/fvWdbnN16yhTQAkd8Ys/hL4OHhQVkx9Sn6gRuk7a5+kv9DoqcaqVEHy1kn7tkJ9/7uLJZ1aM+SXntK0Liat9QQyrYD/FYnQcaGu42DWUm3v+0X+RN7ztvFEQS3aUS6I6FvvVf/IYdd06B94a8IfnTsh1jMRgsV+60ykY7vUDEEk4Y/IQzE8//K2dkghf2497bTewA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) by KL1PR06MB6650.apcprd06.prod.outlook.com (2603:1096:820:fc::9) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7113.26; Thu, 28 Dec 2023 15:16:21 +0000 Received: from SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::883b:97ce:6565:e5e]) by SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::883b:97ce:6565:e5e%4]) with mapi id 15.20.7135.019; Thu, 28 Dec 2023 15:16:21 +0000 From: "larry.lai" To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz, krzk@kernel.org Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, "larry.lai" , Gary Wang Subject: [PATCH V8 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA Date: Thu, 28 Dec 2023 23:15:43 +0800 Message-Id: <20231228151544.14408-3-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20231228151544.14408-1-larry.lai@yunjingtech.com> References: <20231228151544.14408-1-larry.lai@yunjingtech.com> X-ClientProxiedBy: SG2P153CA0039.APCP153.PROD.OUTLOOK.COM (2603:1096:4:c6::8) To SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) Precedence: bulk X-Mailing-List: linux-gpio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SEYPR06MB6507:EE_|KL1PR06MB6650:EE_ X-MS-Office365-Filtering-Correlation-Id: 46a1de95-8515-4560-c0b6-08dc07b7f2a5 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SEYPR06MB6507.apcprd06.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230031)(366004)(136003)(396003)(39830400003)(346002)(376002)(230273577357003)(230173577357003)(230922051799003)(64100799003)(186009)(451199024)(1800799012)(38350700005)(86362001)(30864003)(2906002)(38100700002)(36756003)(41300700001)(66946007)(54906003)(66476007)(316002)(66556008)(83380400001)(6486002)(6506007)(52116002)(1076003)(26005)(478600001)(2616005)(6666004)(5660300002)(4326008)(8936002)(8676002)(6512007)(579004); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: 46a1de95-8515-4560-c0b6-08dc07b7f2a5 X-MS-Exchange-CrossTenant-AuthSource: SEYPR06MB6507.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 28 Dec 2023 15:16:21.3852 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: RbaPWV0HTeObHeJKTNEOeW3St0/MObQ/1GjLjpRQl2WsFCU0Ox0RLDVlr3biN0ggjXewTlXckF5kyazHgHvuUEsJP67t+fn6vyW/JRnD9FE= X-MS-Exchange-Transport-CrossTenantHeadersStamped: KL1PR06MB6650 The UP Squared board implements certain features (pin control) through an on-board FPGA. Signed-off-by: Gary Wang Signed-off-by: larry.lai --- PATCH V7 -> PATCH V8 (1) Refer 2023/11/14 Andy Shevchenko review, cleaned up coding style and addressed review comments. (2) Refer 2023/11/01 Krzysztof Kozlowski review, cleaned up coding style and addressed review comments. PATCH V6 -> V7: There's no change. PATCH V5 -> PATCH V6 (1) Refer 2023/08/10 Linus Walleij review, cleaned up coding style and addressed review comments. PATCH V4 -> PATCH V5 (1) Fixed kernel test robot compiler warning. (2) Synchronizing upboard github to v1.0.5 tag. RFC 2023/04/25 -> PATCH V4 (1) Fixed kernel test robot compiler warning. (2) Remove mistakes with wrong Reviewed-by tags. RFC 2022/11/23 -> RFC 2023/04/25 (1) Refer 2022/12/08 Andy Shevchenko review, cleaned up coding style and addressed review comments. PATCH V3 -> RFC 2022/11/23: (1) Refer 2022/11/09 Linus Walleij review, cleaned up coding style and addressed review comments. PATCH V2 -> V3: There's no change. PATCH V1 -> V2: (1) Synchronized with upboard github to rc2 (2) Refer 2022/10/19 Mark Brown and Andy Shevchenko review, we removed the regmap and acpi patches and implement in upboard pinctrl driver. (3) Refer 2022/10/19 Andy Shevchenko review, fixed the coding style issues, removed using gpio_xxxx API and removed including . --- drivers/pinctrl/Kconfig | 15 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-upboard.c | 1309 +++++++++++++++++++++++++++++ 3 files changed, 1325 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-upboard.c diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 1cf74b0c42e5..c114fc2b7cec 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -483,6 +483,21 @@ config PINCTRL_THUNDERBAY rate control and direction control. This module will be called as pinctrl-thunderbay. +config PINCTRL_UPBOARD + tristate "UP board FPGA pin controller" + depends on (X86 && ACPI) || COMPILE_TEST + depends on MFD_UPBOARD_FPGA + select GENERIC_PINCONF + select PINMUX + select PINCONF + help + Pin controller for the FPGA GPIO lines on UP boards. Due to the + hardware layout, these are meant to be controlled in tandem with their + corresponding Intel SoC GPIOs. + + To compile this driver as a module, choose M here: the module + will be called pinctrl-upboard. + config PINCTRL_ZYNQ bool "Pinctrl driver for Xilinx Zynq" depends on ARCH_ZYNQ diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index e76f5cdc64b0..c366706d36e7 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_PINCTRL_STMFX) += pinctrl-stmfx.o obj-$(CONFIG_PINCTRL_SX150X) += pinctrl-sx150x.o obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o obj-$(CONFIG_PINCTRL_THUNDERBAY) += pinctrl-thunderbay.o +obj-$(CONFIG_PINCTRL_UPBOARD) += pinctrl-upboard.o obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o diff --git a/drivers/pinctrl/pinctrl-upboard.c b/drivers/pinctrl/pinctrl-upboard.c new file mode 100644 index 000000000000..b9a65dcf6cc0 --- /dev/null +++ b/drivers/pinctrl/pinctrl-upboard.c @@ -0,0 +1,1309 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board HAT pin controller driver + * remapping native GPIO to RPI GPIO and set CPLD + * + * Copyright (c) AAEON. All rights reserved. + * + * Authors: Gary Wang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "core.h" +#include "intel/pinctrl-intel.h" + +/* Offset from regs */ +#define REVID 0x000 +#define REVID_SHIFT 16 +#define REVID_MASK GENMASK(31, 16) +#define PADBAR 0x00c + +#define PADCFG0 0x000 +#define PADCFG1 0x004 +#define PADCFG2 0x008 +#define PADCFG0_GPIORXDIS BIT(9) +#define PADCFG0_GPIOTXDIS BIT(8) +#define PADCFG0_GPIORXSTATE BIT(1) +#define PADCFG0_GPIOTXSTATE BIT(0) +#define PADCFG0_PMODE_GPIO 0 +#define PADCFG0_PMODE_SHIFT 10 +#define PADCFG0_PMODE_MASK GENMASK(13, 10) + +#define BOARD_UP_CHT01 0 +#define BOARD_UP_APL01 1 +#define BOARD_UP_UPCORE 2 +#define BOARD_UP_CORE_PLUS 3 +#define BOARD_AIOT_IP6801 4 +#define BOARD_UP_WHL01 5 +#define BOARD_UP_ISH 7 +#define BOARD_UPN_APL 8 +#define BOARD_UP_APL03 9 +#define BOARD_UPX_WHLite 10 +#define BOARD_UPX_TGL 11 +#define BOARD_UPX_EDGE_WHL2 12 +#define BOARD_UPN_EHL01 13 +#define BOARD_UPS_EHL01 BOARD_UPN_EHL01 +#define BOARD_UPX_ADLP01 15 +#define BOARD_UPN_ADLN01 16 +#define BOARD_UPS_ADLP01 BOARD_UPX_ADLP01 +#define BOARD_UP_ADLN01 18 + +struct upboard_pin { + struct regmap_field *funcbit; + struct regmap_field *enbit; + struct regmap_field *dirbit; + /* native pin controllers: number, base, irq */ + unsigned int gpio; + unsigned int base; + int irq; + void __iomem *regs; +}; + +struct upboard_pinctrl { + struct gpio_chip chip; + struct device *dev; + struct pinctrl_dev *pctldev; + struct pinctrl_desc *pctldesc; + struct upboard_pin *pins; + struct regmap *regmap; + const unsigned int *rpi_mapping; + int ident; +}; + +enum upboard_func0_fpgabit { + UPFPGA_I2C0_EN = 8, + UPFPGA_I2C1_EN = 9, + UPFPGA_CEC0_EN = 12, + UPFPGA_ADC0_EN = 14 +}; + +static const struct reg_field upboard_i2c0_reg = + REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C0_EN, UPFPGA_I2C0_EN); + +static const struct reg_field upboard_i2c1_reg = + REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C1_EN, UPFPGA_I2C1_EN); + +static const struct reg_field upboard_adc0_reg = + REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_ADC0_EN, UPFPGA_ADC0_EN); + +/* Pin group information */ +struct upboard_pingroup { + const char *name; + const unsigned int *pins; + size_t npins; +}; + +/* Pin function information */ +struct upboard_function { + const char *name; + const char * const *groups; + size_t ngroups; +}; + +#define UPBOARD_BIT_TO_PIN(r, bit) \ + ((r) * UPFPGA_REGISTER_SIZE + (bit)) + +/* + * UP board data + */ + +#define UPBOARD_UP_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP_##id)) + +#define UPBOARD_UP_PIN_ANON(r, bit) \ + { \ + .number = UPBOARD_BIT_TO_PIN(r, bit), \ + } + +#define UPBOARD_UP_PIN_NAME(r, id) \ + { \ + .number = UPBOARD_UP_BIT_TO_PIN(r, id), \ + .name = #id, \ + } + +#define UPBOARD_UP_PIN_FUNC(r, id, data) \ + { \ + .number = UPBOARD_UP_BIT_TO_PIN(r, id), \ + .name = #id, \ + .drv_data = (void *)(data), \ + } + +#define UPBOARD_PIN_GROUP(n, p) \ + { \ + .name = (n), \ + .pins = (p), \ + .npins = ARRAY_SIZE((p)), \ + } + +#define FUNCTION(n, g) \ + { \ + .name = (n), \ + .groups = (g), \ + .ngroups = ARRAY_SIZE((g)), \ + } + +enum upboard_up_reg1_fpgabit { + UPFPGA_UP_I2C1_SDA, + UPFPGA_UP_I2C1_SCL, + UPFPGA_UP_ADC0, + UPFPGA_UP_GPIO17, + UPFPGA_UP_GPIO27, + UPFPGA_UP_GPIO22, + UPFPGA_UP_SPI_MOSI, + UPFPGA_UP_SPI_MISO, + UPFPGA_UP_SPI_CLK, + UPFPGA_UP_I2C0_SDA, + UPFPGA_UP_GPIO5, + UPFPGA_UP_GPIO6, + UPFPGA_UP_PWM1, + UPFPGA_UP_I2S_FRM, + UPFPGA_UP_GPIO26, + UPFPGA_UP_UART1_TX +}; + +enum upboard_up_reg2_fpgabit { + UPFPGA_UP_UART1_RX, + UPFPGA_UP_I2S_CLK, + UPFPGA_UP_GPIO23, + UPFPGA_UP_GPIO24, + UPFPGA_UP_GPIO25, + UPFPGA_UP_SPI_CS0, + UPFPGA_UP_SPI_CS1, + UPFPGA_UP_I2C0_SCL, + UPFPGA_UP_PWM0, + UPFPGA_UP_GPIO16, + UPFPGA_UP_I2S_DIN, + UPFPGA_UP_I2S_DOUT, +}; + +#define UPFPGA_UP_UART1_RTS UPFPGA_UP_GPIO17 +#define UPFPGA_UP_UART1_CTS UPFPGA_UP_GPIO16 + +static struct pinctrl_pin_desc upboard_up_pins[] = { + UPBOARD_UP_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg), + UPBOARD_UP_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg), + UPBOARD_UP_PIN_FUNC(0, ADC0, &upboard_adc0_reg), + UPBOARD_UP_PIN_NAME(0, UART1_RTS), + UPBOARD_UP_PIN_NAME(0, GPIO27), + UPBOARD_UP_PIN_NAME(0, GPIO22), + UPBOARD_UP_PIN_NAME(0, SPI_MOSI), + UPBOARD_UP_PIN_NAME(0, SPI_MISO), + UPBOARD_UP_PIN_NAME(0, SPI_CLK), + UPBOARD_UP_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg), + UPBOARD_UP_PIN_NAME(0, GPIO5), + UPBOARD_UP_PIN_NAME(0, GPIO6), + UPBOARD_UP_PIN_NAME(0, PWM1), + UPBOARD_UP_PIN_NAME(0, I2S_FRM), + UPBOARD_UP_PIN_NAME(0, GPIO26), + UPBOARD_UP_PIN_NAME(0, UART1_TX), + /* register 1 */ + UPBOARD_UP_PIN_NAME(1, UART1_RX), + UPBOARD_UP_PIN_NAME(1, I2S_CLK), + UPBOARD_UP_PIN_NAME(1, GPIO23), + UPBOARD_UP_PIN_NAME(1, GPIO24), + UPBOARD_UP_PIN_NAME(1, GPIO25), + UPBOARD_UP_PIN_NAME(1, SPI_CS0), + UPBOARD_UP_PIN_NAME(1, SPI_CS1), + UPBOARD_UP_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg), + UPBOARD_UP_PIN_NAME(1, PWM0), + UPBOARD_UP_PIN_NAME(1, UART1_CTS), + UPBOARD_UP_PIN_NAME(1, I2S_DIN), + UPBOARD_UP_PIN_NAME(1, I2S_DOUT), +}; + +static const unsigned int upboard_up_rpi_mapping[] = { + UPBOARD_UP_BIT_TO_PIN(0, I2C0_SDA), + UPBOARD_UP_BIT_TO_PIN(1, I2C0_SCL), + UPBOARD_UP_BIT_TO_PIN(0, I2C1_SDA), + UPBOARD_UP_BIT_TO_PIN(0, I2C1_SCL), + UPBOARD_UP_BIT_TO_PIN(0, ADC0), + UPBOARD_UP_BIT_TO_PIN(0, GPIO5), + UPBOARD_UP_BIT_TO_PIN(0, GPIO6), + UPBOARD_UP_BIT_TO_PIN(1, SPI_CS1), + UPBOARD_UP_BIT_TO_PIN(1, SPI_CS0), + UPBOARD_UP_BIT_TO_PIN(0, SPI_MISO), + UPBOARD_UP_BIT_TO_PIN(0, SPI_MOSI), + UPBOARD_UP_BIT_TO_PIN(0, SPI_CLK), + UPBOARD_UP_BIT_TO_PIN(1, PWM0), + UPBOARD_UP_BIT_TO_PIN(0, PWM1), + UPBOARD_UP_BIT_TO_PIN(0, UART1_TX), + UPBOARD_UP_BIT_TO_PIN(1, UART1_RX), + UPBOARD_UP_BIT_TO_PIN(1, GPIO16), + UPBOARD_UP_BIT_TO_PIN(0, GPIO17), + UPBOARD_UP_BIT_TO_PIN(1, I2S_CLK), + UPBOARD_UP_BIT_TO_PIN(0, I2S_FRM), + UPBOARD_UP_BIT_TO_PIN(1, I2S_DIN), + UPBOARD_UP_BIT_TO_PIN(1, I2S_DOUT), + UPBOARD_UP_BIT_TO_PIN(0, GPIO22), + UPBOARD_UP_BIT_TO_PIN(1, GPIO23), + UPBOARD_UP_BIT_TO_PIN(1, GPIO24), + UPBOARD_UP_BIT_TO_PIN(1, GPIO25), + UPBOARD_UP_BIT_TO_PIN(0, GPIO26), + UPBOARD_UP_BIT_TO_PIN(0, GPIO27), +}; + +/* + * UP^2 board data + */ + +#define UPBOARD_UP2_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP2_##id)) + +#define UPBOARD_UP2_PIN_MUX(r, bit, data) \ + { \ + .number = UPBOARD_BIT_TO_PIN(r, bit), \ + .name = "PINMUX", \ + .drv_data = (void *)(data), \ + } + +#define UPBOARD_UP2_PIN_NAME(r, id) \ + { \ + .number = UPBOARD_UP2_BIT_TO_PIN(r, id), \ + .name = #id, \ + } + +#define UPBOARD_UP2_PIN_FUNC(r, id, data) \ + { \ + .number = UPBOARD_UP2_BIT_TO_PIN(r, id), \ + .name = #id, \ + .drv_data = (void *)(data), \ + } + +enum upboard_up2_reg0_fpgabit { + UPFPGA_UP2_UART1_TXD, + UPFPGA_UP2_UART1_RXD, + UPFPGA_UP2_UART1_RTS, + UPFPGA_UP2_UART1_CTS, + UPFPGA_UP2_GPIO3_ADC0, + UPFPGA_UP2_GPIO5_ADC2, + UPFPGA_UP2_GPIO6_ADC3, + UPFPGA_UP2_GPIO11, + UPFPGA_UP2_EXHAT_LVDS1n, + UPFPGA_UP2_EXHAT_LVDS1p, + UPFPGA_UP2_SPI2_TXD, + UPFPGA_UP2_SPI2_RXD, + UPFPGA_UP2_SPI2_FS1, + UPFPGA_UP2_SPI2_FS0, + UPFPGA_UP2_SPI2_CLK, + UPFPGA_UP2_SPI1_TXD, +}; + +enum upboard_up2_reg1_fpgabit { + UPFPGA_UP2_SPI1_RXD, + UPFPGA_UP2_SPI1_FS1, + UPFPGA_UP2_SPI1_FS0, + UPFPGA_UP2_SPI1_CLK, + UPFPGA_UP2_BIT20, + UPFPGA_UP2_BIT21, + UPFPGA_UP2_BIT22, + UPFPGA_UP2_BIT23, + UPFPGA_UP2_PWM1, + UPFPGA_UP2_PWM0, + UPFPGA_UP2_EXHAT_LVDS0n, + UPFPGA_UP2_EXHAT_LVDS0p, + UPFPGA_UP2_I2C0_SCL, + UPFPGA_UP2_I2C0_SDA, + UPFPGA_UP2_I2C1_SCL, + UPFPGA_UP2_I2C1_SDA, +}; + +enum upboard_up2_reg2_fpgabit { + UPFPGA_UP2_EXHAT_LVDS3n, + UPFPGA_UP2_EXHAT_LVDS3p, + UPFPGA_UP2_EXHAT_LVDS4n, + UPFPGA_UP2_EXHAT_LVDS4p, + UPFPGA_UP2_EXHAT_LVDS5n, + UPFPGA_UP2_EXHAT_LVDS5p, + UPFPGA_UP2_I2S_SDO, + UPFPGA_UP2_I2S_SDI, + UPFPGA_UP2_I2S_WS_SYNC, + UPFPGA_UP2_I2S_BCLK, + UPFPGA_UP2_EXHAT_LVDS6n, + UPFPGA_UP2_EXHAT_LVDS6p, + UPFPGA_UP2_EXHAT_LVDS7n, + UPFPGA_UP2_EXHAT_LVDS7p, + UPFPGA_UP2_EXHAT_LVDS2n, + UPFPGA_UP2_EXHAT_LVDS2p, +}; + +static struct pinctrl_pin_desc upboard_up2_pins[] = { + UPBOARD_UP2_PIN_NAME(0, UART1_TXD), + UPBOARD_UP2_PIN_NAME(0, UART1_RXD), + UPBOARD_UP2_PIN_NAME(0, UART1_RTS), + UPBOARD_UP2_PIN_NAME(0, UART1_CTS), + UPBOARD_UP2_PIN_NAME(0, GPIO3_ADC0), + UPBOARD_UP2_PIN_NAME(0, GPIO5_ADC2), + UPBOARD_UP2_PIN_NAME(0, GPIO6_ADC3), + UPBOARD_UP2_PIN_NAME(0, GPIO11), + UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1n), + UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1p), + UPBOARD_UP2_PIN_NAME(0, SPI2_TXD), + UPBOARD_UP2_PIN_NAME(0, SPI2_RXD), + UPBOARD_UP2_PIN_NAME(0, SPI2_FS1), + UPBOARD_UP2_PIN_NAME(0, SPI2_FS0), + UPBOARD_UP2_PIN_NAME(0, SPI2_CLK), + UPBOARD_UP2_PIN_NAME(0, SPI1_TXD), + UPBOARD_UP2_PIN_NAME(1, SPI1_RXD), + UPBOARD_UP2_PIN_NAME(1, SPI1_FS1), + UPBOARD_UP2_PIN_NAME(1, SPI1_FS0), + UPBOARD_UP2_PIN_NAME(1, SPI1_CLK), + UPBOARD_UP2_PIN_MUX(1, 4, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_MUX(1, 5, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_MUX(1, 6, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_MUX(1, 7, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_NAME(1, PWM1), + UPBOARD_UP2_PIN_NAME(1, PWM0), + UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0n), + UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0p), + UPBOARD_UP2_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_FUNC(1, I2C0_SDA, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_FUNC(1, I2C1_SCL, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_FUNC(1, I2C1_SDA, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5p), + UPBOARD_UP2_PIN_NAME(2, I2S_SDO), + UPBOARD_UP2_PIN_NAME(2, I2S_SDI), + UPBOARD_UP2_PIN_NAME(2, I2S_WS_SYNC), + UPBOARD_UP2_PIN_NAME(2, I2S_BCLK), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2p), +}; + +static const unsigned int upboard_up2_rpi_mapping[] = { + UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SDA), + UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SCL), + UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SDA), + UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SCL), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO3_ADC0), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO11), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_CLK), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS1), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS0), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_RXD), + UPBOARD_UP2_BIT_TO_PIN(0, SPI1_TXD), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_CLK), + UPBOARD_UP2_BIT_TO_PIN(1, PWM0), + UPBOARD_UP2_BIT_TO_PIN(1, PWM1), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_TXD), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_RXD), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_CTS), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_RTS), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_BCLK), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_WS_SYNC), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDI), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDO), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO6_ADC3), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS1), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_RXD), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_TXD), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS0), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO5_ADC2), +}; + +/* + * UP Core board + CREX carrier board data + */ + +#define UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id) \ + (UPBOARD_BIT_TO_PIN(r, UPFPGA_UPCORE_CREX_##id)) + +#define UPBOARD_UPCORE_CREX_PIN_ANON(r, bit) \ + { \ + .number = UPBOARD_BIT_TO_PIN(r, bit), \ + } + +#define UPBOARD_UPCORE_CREX_PIN_NAME(r, id) \ + { \ + .number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id), \ + .name = #id, \ + } + +#define UPBOARD_UPCORE_CREX_PIN_FUNC(r, id, data) \ + { \ + .number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id), \ + .name = #id, \ + .drv_data = (void *)(data), \ + } + +enum upboard_upcore_crex_reg1_fpgabit { + UPFPGA_UPCORE_CREX_I2C0_SDA, + UPFPGA_UPCORE_CREX_I2C0_SCL, + UPFPGA_UPCORE_CREX_I2C1_SDA, + UPFPGA_UPCORE_CREX_I2C1_SCL, + UPFPGA_UPCORE_CREX_SPI2_CS0, + UPFPGA_UPCORE_CREX_SPI2_CS1, + UPFPGA_UPCORE_CREX_SPI2_MOSI, + UPFPGA_UPCORE_CREX_SPI2_MISO, + UPFPGA_UPCORE_CREX_SPI2_CLK, + UPFPGA_UPCORE_CREX_UART1_TXD, + UPFPGA_UPCORE_CREX_UART1_RXD, + UPFPGA_UPCORE_CREX_PWM0, + UPFPGA_UPCORE_CREX_PWM1, + UPFPGA_UPCORE_CREX_I2S2_FRM, + UPFPGA_UPCORE_CREX_I2S2_CLK, + UPFPGA_UPCORE_CREX_I2S2_RX, +}; + +enum upboard_upcore_crex_reg2_fpgabit { + UPFPGA_UPCORE_CREX_I2S2_TX, + UPFPGA_UPCORE_CREX_GPIO0, + UPFPGA_UPCORE_CREX_GPIO2, + UPFPGA_UPCORE_CREX_GPIO3, + UPFPGA_UPCORE_CREX_GPIO4, + UPFPGA_UPCORE_CREX_GPIO9, +}; + +static struct pinctrl_pin_desc upboard_upcore_crex_pins[] = { + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg), + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SCL, &upboard_i2c0_reg), + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg), + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS0), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS1), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MOSI), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MISO), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CLK), + UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_TXD), + UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_RXD), + UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM0), + UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM1), + UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_FRM), + UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_CLK), + UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_RX), + /* register 1 */ + UPBOARD_UPCORE_CREX_PIN_NAME(1, I2S2_TX), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO0), + UPBOARD_UPCORE_CREX_PIN_FUNC(1, GPIO2, &upboard_adc0_reg), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO3), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO4), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO9), +}; + +static unsigned int upboard_upcore_crex_rpi_mapping[] = { + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SDA), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SCL), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SDA), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SCL), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO0), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO2), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO3), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS1), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS0), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MISO), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MOSI), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CLK), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM0), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM1), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_TXD), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_RXD), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO9), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO4), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_CLK), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_FRM), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_RX), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, I2S2_TX), +}; + +/* + * UP Core board + CRST02 carrier board data + */ + +#define upboard_upcore_crst02_pins upboard_upcore_crex_pins +#define upboard_upcore_crst02_rpi_mapping upboard_upcore_crex_rpi_mapping + +static int upboard_set_mux(struct pinctrl_dev *pctldev, unsigned int function, + unsigned int group) +{ + return 0; +} + +static int upboard_fpga_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + const struct pin_desc * const pd = pin_desc_get(pctldev, pin); + const struct upboard_pin *p; + int ret; + + p = pd->drv_data; + if (p->funcbit) { + ret = regmap_field_write(p->funcbit, 0); + if (ret) + return ret; + } + + if (p->enbit) { + ret = regmap_field_write(p->enbit, 1); + if (ret) + return ret; + } + + return 0; +} + +static int upboard_fpga_request_free(struct pinctrl_dev *pctldev, + unsigned int pin) +{ + const struct pin_desc * const pd = pin_desc_get(pctldev, pin); + const struct upboard_pin *p; + int ret; + + p = pd->drv_data; + if (p->funcbit) { + ret = regmap_field_write(p->funcbit, 1); + if (ret) + return ret; + } + + if (p->enbit) { + ret = regmap_field_write(p->enbit, 0); + if (ret) + return ret; + } + + return 0; +} + +static int upboard_fpga_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin, bool input) +{ + const struct pin_desc * const pd = pin_desc_get(pctldev, pin); + const struct upboard_pin *p; + + p = pd->drv_data; + + return regmap_field_write(p->dirbit, input); +} + +static int upboard_get_functions_count(struct pinctrl_dev *pctldev) +{ + return 0; +} + +static const char *upboard_get_function_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + return NULL; +} + +static int upboard_get_function_groups(struct pinctrl_dev *pctldev, + unsigned int selector, + const char * const **groups, + unsigned int *num_groups) +{ + *groups = NULL; + *num_groups = 0; + return 0; +} + +static const struct pinmux_ops upboard_pinmux_ops = { + .get_functions_count = upboard_get_functions_count, + .get_function_groups = upboard_get_function_groups, + .get_function_name = upboard_get_function_name, + .set_mux = upboard_set_mux, + .gpio_request_enable = upboard_fpga_request_enable, + .gpio_set_direction = upboard_fpga_set_direction, +}; + +static int upboard_get_groups_count(struct pinctrl_dev *pctldev) +{ + return 0; +} + +static const char *upboard_get_group_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + return NULL; +} + +static void upboard_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned int pin) +{ + struct upboard_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + void __iomem *padcfg; + u32 cfg0, cfg1, mode; + + if (pctrl->pins[pin].regs == NULL) + return; + + cfg0 = readl(pctrl->pins[pin].regs); + cfg1 = readl(pctrl->pins[pin].regs + PADCFG1); + + mode = (cfg0 & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT; + if (mode == PADCFG0_PMODE_GPIO) + seq_puts(s, "GPIO "); + else + seq_printf(s, "mode %d ", mode); + + seq_printf(s, "0x%08x 0x%08x", cfg0, cfg1); + + /* Dump the additional PADCFG registers if available */ + padcfg = pctrl->pins[pin].regs + PADCFG2; + if (padcfg) + seq_printf(s, " 0x%08x", readl(padcfg)); + + seq_printf(s, " 0x%p", pctrl->pins[pin].regs); +} + +static const struct pinctrl_ops upboard_pinctrl_ops = { + .get_groups_count = upboard_get_groups_count, + .get_group_name = upboard_get_group_name, + .pin_dbg_show = upboard_pin_dbg_show, +}; + +static struct pinctrl_desc upboard_up_pinctrl_desc = { + .pins = upboard_up_pins, + .npins = ARRAY_SIZE(upboard_up_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_desc upboard_up2_pinctrl_desc = { + .pins = upboard_up2_pins, + .npins = ARRAY_SIZE(upboard_up2_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_desc upboard_upcore_crex_pinctrl_desc = { + .pins = upboard_upcore_crex_pins, + .npins = ARRAY_SIZE(upboard_upcore_crex_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_desc upboard_upcore_crst02_pinctrl_desc = { + .pins = upboard_upcore_crst02_pins, + .npins = ARRAY_SIZE(upboard_upcore_crst02_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static void upboard_alt_func_enable(struct gpio_chip *gc, const char *name, int id) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + int offset[pctrl->pctldesc->npins]; + int i, cnt; + bool input; + int mode; + unsigned int val; + + /* find all pins */ + for (i = 0, cnt = 0; i < pctrl->pctldesc->npins; i++) { + if (strstr(pctrl->pctldesc->pins[i].name, name)) + offset[cnt++] = i; + } + + /* change to alternate function */ + for (i = 0; i < cnt; i++) { + if (pctrl->pins[offset[i]].regs == NULL) + continue; + input = false; + mode = 0; /* default GPIO */ + val = readl(pctrl->pins[offset[i]].regs); + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "I2C") || + strstr(pctrl->pctldesc->pins[offset[i]].name, "PINMUX")) { + mode = 1; + switch (id) { + case BOARD_UPN_ADLN01: + case BOARD_UPX_ADLP01: + mode = 2; + break; + default: + break; + } + + val |= mode<pins[offset[i]].regs); + upboard_fpga_request_free(pctrl->pctldev, offset[i]); + continue; + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "UART")) { + mode = 1; + switch (id) { + case BOARD_UPN_EHL01: + mode = 4; + break; + case BOARD_UP_ADLN01: + case BOARD_UPN_ADLN01: + case BOARD_UPX_ADLP01: + mode = 2; + break; + default: + break; + } + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "SPI")) { + mode = 1; + switch (id) { + case BOARD_UP_WHL01: + mode = 3; + break; + case BOARD_UP_ADLN01: + case BOARD_UPN_ADLN01: + case BOARD_UPX_ADLP01: + mode = 7; + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MOSI")) { + val &= ~PADCFG0_GPIOTXDIS; + val |= PADCFG0_GPIORXDIS; + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO")) + val |= PADCFG0_GPIORXDIS; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CLK")) { + val &= ~PADCFG0_GPIOTXDIS; + val |= PADCFG0_GPIORXDIS; + } + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CS0")) + val |= PADCFG0_GPIORXDIS; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CS1")) + continue; + break; + default: + break; + } + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "I2S")) { + mode = 1; + switch (id) { + case BOARD_UPX_ADLP01: + mode = 4; + break; + default: + break; + } + } + + val |= mode<pins[offset[i]].regs); + + /* input pins */ + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "RX")) + input = true; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CTS")) + input = true; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "ADC")) { + input = true; + if (id == BOARD_UP_APL01) + upboard_fpga_request_enable(pctrl->pctldev, NULL, offset[i]); + else + upboard_fpga_request_free(pctrl->pctldev, offset[i]); + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO")) + input = true; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "DIN")) + input = true; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "SDI")) + input = true; + + upboard_fpga_set_direction(pctrl->pctldev, NULL, offset[i], input); + } +} + +static int upboard_rpi_to_native_gpio(struct gpio_chip *gc, unsigned int gpio) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[gpio]; + struct pinctrl_gpio_range *range; + + range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin); + if (!range) + return -ENODEV; + + return range->base; +} + +static int upboard_gpio_request(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + int gpio = upboard_rpi_to_native_gpio(gc, offset); + + upboard_fpga_request_enable(pctrl->pctldev, NULL, pin); + return pinctrl_gpio_request(gpio); +} + +static void upboard_gpio_free(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + int gpio = upboard_rpi_to_native_gpio(gc, offset); + unsigned int pin = pctrl->rpi_mapping[offset]; + + pinctrl_gpio_free(gpio); + + upboard_alt_func_enable(gc, pctrl->pctldesc->pins[pin].name, pctrl->ident); +} + +static int upboard_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + unsigned int padcfg0; + + if (!pctrl->pins[pin].regs) + return -EINVAL; + + padcfg0 = readl(pctrl->pins[pin].regs); + if (padcfg0 & PADCFG0_GPIOTXDIS) + return GPIO_LINE_DIRECTION_IN; + + return GPIO_LINE_DIRECTION_OUT; +} + +static int upboard_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + int gpio = upboard_rpi_to_native_gpio(gc, offset); + int reg_val = readl(pctrl->pins[pin].regs); + + if (gpio < 0) + return gpio; + + /* APL03 board open drain GPIO */ + if (pctrl->ident == BOARD_UP_APL03) { + switch (pin) { + case 0: + case 1: + case 9: + case 23: + return reg_val & 0x00000003; + default: + break; + } + } + + if (!(reg_val & PADCFG0_GPIOTXDIS)) + return !!(reg_val & PADCFG0_GPIOTXSTATE); + + return !!(reg_val & PADCFG0_GPIORXSTATE); +} + +static void upboard_gpio_set(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + int gpio = upboard_rpi_to_native_gpio(gc, offset); + int reg_val = readl(pctrl->pins[pin].regs); + + if (gpio < 0) + return; + + /* APL03 board open drain GPIO */ + if (pctrl->ident == BOARD_UP_APL03) { + switch (pin) { + case 0: + case 1: + case 9: + case 23: + if (value) + reg_val |= PADCFG0_GPIOTXDIS; + else + reg_val &= ~PADCFG0_GPIOTXDIS; + + writel(reg_val, pctrl->pins[pin].regs); + return; + default: + break; + } + } + if (value) + reg_val |= PADCFG0_GPIOTXSTATE; + else + reg_val &= ~PADCFG0_GPIOTXSTATE; + writel(reg_val, pctrl->pins[pin].regs); +} + +static int upboard_gpio_direction_input(struct gpio_chip *gc, + unsigned int offset) +{ + int gpio = upboard_rpi_to_native_gpio(gc, offset); + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + + upboard_fpga_set_direction(pctrl->pctldev, NULL, pin, true); + + return pinctrl_gpio_direction_input(gpio); +} + +static int upboard_gpio_direction_output(struct gpio_chip *gc, + unsigned int offset, int value) +{ + int gpio = upboard_rpi_to_native_gpio(gc, offset); + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + + upboard_fpga_set_direction(pctrl->pctldev, NULL, pin, false); + + return pinctrl_gpio_direction_output(gpio); +} + +static void __iomem *upboard_get_regs(struct gpio_chip *gc, unsigned int gpio, unsigned int reg) +{ + struct platform_device *pdev = to_platform_device(gc->parent); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct intel_pinctrl *pctrl = gpiochip_get_data(gc); + size_t nregs; + void __iomem *base = NULL; + u32 offset, value; + int pin = gpio-gc->base; + + /* check Intel pin controller for all platform */ + if (pctrl->ncommunities > 1) { + int i, j, offset = 0; + + pin = -1; + for (i = 0; i < pctrl->ncommunities; i++) { + struct intel_community *community = &pctrl->communities[i]; + + for (j = 0; j < community->ngpps ; j++) { + struct intel_padgroup gpps = community->gpps[j]; + + if (gpio < gc->base + gpps.gpio_base + gpps.size) { + res = platform_get_resource(pdev, IORESOURCE_MEM, + community->barno); + pin = gpio-gc->base-gpps.gpio_base + + offset-community->pin_base; + break; + } + + offset += gpps.size; + } + + if (pin != -1) + break; + } + } + + base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (base == NULL) + return base; + + offset = readl(base + PADBAR); + value = readl(base + REVID); + + if (((value & REVID_MASK) >> REVID_SHIFT) >= 0x94) + nregs = 4; + else + nregs = 2; + + return base + offset + reg + pin * nregs * 4; +} + +static int upboard_acpi_node_pin_mapping(struct upboard_fpga *fpga, + struct upboard_pinctrl *pctrl, + const char *propname, + const char *pinctl_name, + unsigned int pin_offset) +{ + struct gpio_descs *descs; + int ret, i; + + descs = devm_gpiod_get_array(fpga->dev, propname, GPIOD_ASIS); + if (IS_ERR(descs)) { + ret = PTR_ERR(descs); + if (ret != -EPROBE_DEFER) + dev_err(fpga->dev, "Failed to get %s GPIOs", propname); + + return ret; + } + + for (i = 0; i < descs->ndescs; i++) { + struct gpio_desc *desc = descs->desc[i]; + struct gpio_chip *gc = gpiod_to_chip(desc); + + pctrl->pins[i].gpio = desc_to_gpio(desc); + pctrl->pins[i].base = gc->base; + pctrl->pins[i].irq = gpiod_to_irq(desc); + pctrl->pins[i].regs = + upboard_get_regs(gc, + desc_to_gpio(desc) - gc->base, + PADCFG0); + + /* The GPIOs may not be contiguous, so add them 1-by-1 */ + ret = gpiochip_add_pin_range(gpiod_to_chip(desc), pinctl_name, + desc_to_gpio(desc) - gc->base, + pin_offset + i, 1); + if (ret) + return ret; + } + + /* dispose acpi resource */ + devm_gpiod_put_array(fpga->dev, descs); + + return ret; +} + +static struct gpio_chip upboard_gpio_chip = { + .label = "Raspberry Pi compatible UP GPIO", + .base = 0, + .request = upboard_gpio_request, + .free = upboard_gpio_free, + .get = upboard_gpio_get, + .set = upboard_gpio_set, + .get_direction = upboard_gpio_get_direction, + .direction_input = upboard_gpio_direction_input, + .direction_output = upboard_gpio_direction_output, + .owner = THIS_MODULE, +}; + +/* DMI Matches to assign pin mapping driver data */ +static const struct dmi_system_id upboard_dmi_table[] __initconst = { + { + .ident = BOARD_UP_APL01, + .matches = { /* UP SQUARED */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL01"), + }, + }, + { + .ident = BOARD_UP_APL01, + .matches = { /* UP SQUARED Pro*/ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-APL01"), + }, + }, + { + .ident = BOARD_UP_APL03, + .matches = { /* UP 4000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL03"), + }, + }, + { + .ident = BOARD_UP_WHL01, + .matches = { /* UPX WHL */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-WHL01"), + }, + }, + { + .ident = BOARD_UPX_TGL, + .matches = { /* UP i11 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-TGL01"), + }, + }, + { + .ident = BOARD_UPN_EHL01, + .matches = { /* UP 6000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-EHL01"), + }, + }, + { + .ident = BOARD_UPS_EHL01, + .matches = { /* UP squared v2 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-EHL01"), + }, + }, + { + .ident = BOARD_UPX_ADLP01, + .matches = { /* UP Xtreme i12 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-ADLP01"), + }, + }, + { + .ident = BOARD_UPN_ADLN01, + .matches = { /* UP 7000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-ADLN01"), + }, + }, + { + .ident = BOARD_UPS_ADLP01, + .matches = { /* UP Squared i12 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-ADLP01"), + }, + }, + { + .ident = BOARD_UP_ADLN01, + .matches = { /* UP 7000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-ADLN01"), + }, + }, + { } /* Terminating entry */ +}; + +static int upboard_pinctrl_probe(struct platform_device *pdev) +{ + struct upboard_fpga * const fpga = dev_get_drvdata(pdev->dev.parent); + struct pinctrl_desc *pctldesc; + struct upboard_pinctrl *pctrl; + struct upboard_pin *pins; + const struct dmi_system_id *system_id; + const unsigned int *rpi_mapping; + unsigned int ngpio; + int ret; + int i; + /* default */ + int board_id = BOARD_UP_APL03; + + /* check board id to arrange driver data */ + system_id = dmi_first_match(upboard_dmi_table); + if (system_id) + board_id = system_id->ident; + dev_info(&pdev->dev, "Compatible Up Board ID %d", board_id); + switch (board_id) { + case BOARD_UP_APL01: + pctldesc = &upboard_up2_pinctrl_desc; + rpi_mapping = upboard_up2_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_up2_rpi_mapping); + break; + case BOARD_UP_UPCORE: + pctldesc = &upboard_upcore_crex_pinctrl_desc; + rpi_mapping = upboard_upcore_crex_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_upcore_crex_rpi_mapping); + break; + case BOARD_UP_CORE_PLUS: + pctldesc = &upboard_upcore_crst02_pinctrl_desc; + rpi_mapping = upboard_upcore_crst02_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_upcore_crst02_rpi_mapping); + break; + default: + pctldesc = &upboard_up_pinctrl_desc; + rpi_mapping = upboard_up_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_up_rpi_mapping); + break; + } + + pctldesc->name = dev_name(&pdev->dev); + + pins = devm_kcalloc(&pdev->dev, pctldesc->npins, sizeof(*pins), GFP_KERNEL); + if (!pins) + return -ENOMEM; + + /* initialise pins */ + for (i = 0; i < pctldesc->npins; i++) { + struct upboard_pin *pin = &pins[i]; + struct pinctrl_pin_desc *pd = (struct pinctrl_pin_desc *) &pctldesc->pins[i]; + struct reg_field fldconf = {0}; + unsigned int regoff = (pd->number / UPFPGA_REGISTER_SIZE); + unsigned int lsb = pd->number % UPFPGA_REGISTER_SIZE; + + pin->funcbit = NULL; + + if (pd->drv_data) { + fldconf = *(struct reg_field *)pd->drv_data; + + pin->funcbit = devm_regmap_field_alloc(&pdev->dev, + fpga->regmap, + fldconf); + if (IS_ERR(pin->funcbit)) + return PTR_ERR(pin->funcbit); + } + + fldconf.reg = UPFPGA_REG_GPIO_EN0 + regoff; + fldconf.lsb = lsb; + fldconf.msb = lsb; + + pin->enbit = devm_regmap_field_alloc(&pdev->dev, + fpga->regmap, + fldconf); + if (IS_ERR(pin->enbit)) + return PTR_ERR(pin->enbit); + + fldconf.reg = UPFPGA_REG_GPIO_DIR0 + regoff; + fldconf.lsb = lsb; + fldconf.msb = lsb; + + pin->dirbit = devm_regmap_field_alloc(&pdev->dev, + fpga->regmap, + fldconf); + if (IS_ERR(pin->dirbit)) + return PTR_ERR(pin->dirbit); + + pd->drv_data = pin; + } + + /* create a new pinctrl device and register it */ + pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); + if (!pctrl) + return -ENOMEM; + + pctrl->rpi_mapping = rpi_mapping; + pctrl->chip = upboard_gpio_chip; + pctrl->pctldesc = pctldesc; + pctrl->chip.parent = &pdev->dev; + pctrl->chip.ngpio = ngpio; + pctrl->pins = pins; + pctrl->ident = board_id; + + ret = devm_gpiochip_add_data(&pdev->dev, &pctrl->chip, pctrl); + if (ret) + return ret; + + pctrl->pctldev = devm_pinctrl_register(&pdev->dev, pctldesc, pctrl); + if (IS_ERR(pctrl->pctldev)) + return PTR_ERR(pctrl->pctldev); + + /* add acpi pin mapping according to external-gpios key */ + ret = upboard_acpi_node_pin_mapping(fpga, pctrl, + "external", + dev_name(&pdev->dev), + 0); + if (ret) + return ret; + + upboard_alt_func_enable(&pctrl->chip, "I2C", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "SPI", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "UART", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "I2S", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "PWM", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "ADC", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "PINMUX", pctrl->ident); + + return ret; +} + +static struct platform_driver upboard_pinctrl_driver = { + .driver = { + .name = "upboard-pinctrl", + }, +}; +module_platform_driver_probe(upboard_pinctrl_driver, upboard_pinctrl_probe); + +MODULE_AUTHOR("Gary Wang "); +MODULE_DESCRIPTION("UP Board HAT pin controller driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:upboard-pinctrl"); From patchwork Thu Dec 28 15:15:44 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "larry.lai" X-Patchwork-Id: 760082 Received: from APC01-SG2-obe.outbound.protection.outlook.com (mail-sgaapc01on2134.outbound.protection.outlook.com [40.107.215.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id CAA95101CA; Thu, 28 Dec 2023 15:16:27 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=yunjingtech.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=yunjingtech.com ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=XEFxh2UKvJCAAa/kzKp1XMrGQXFseukYhED10rQSHHBoqT+YYUdRn0qobX6onDi6T/qhq/WIIrzwSTRVtL+HWUOi1ZEebsr5wJ+rZSLNdQ4eenbwgS2Tax1njMJNJBh4ESdI6bRA7U6y1wvoU7JS0OJWjHWFTRqHRD3w7t0tITrWmevamMVwTphi7CpAML9AWXXcIzPrYHA/GbcONY823rkqgwmYyAjT9XqdBq13qNf/JewBJnix8c9tgdcrAcwRGM1dWRvQik8hzLB1yLtXPN/VcnhPaWt81ldApHxshxXFhlMiQ3SQtZRtil0ExeJMujIIe5K8N1sTueNwDRCTLg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=QFIRk9wClPM6tKzCBtbJ4YgDZ54aAVyda+ezhHJ1hXc=; b=FhU75dtl0Z1k2NScO5oxxwnKUB+EP5PXoSd6QWH+3qPG0Cuz/GZC+UIKS56m95e5QwrdQNwSsYR6G0GR9hGOdP/H4axoyV+Vq1Z0ydLcZdRl+hiHGaAOPxkShnXj62V1ZXSuUu5V287wb+6gdU9FtLtjGR+mUACI/HCPxy9NlpdABR2Yn7BKdzZ0fb1clvqNEwdPF0Q823H7HfN9XKerKd+37PR3RhKBB08A14cEaKXF5SZ9bC3CReNYIL1Yo601Duj6jhsVbfPbWQW1g+vDT4b4a+Wc8qdptchtZ/fE8kGZFeikkl5q/TnFJpZ9LP5pIwWU/z7GjDInsyuI0DihIg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) by KL1PR06MB6650.apcprd06.prod.outlook.com (2603:1096:820:fc::9) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7113.26; Thu, 28 Dec 2023 15:16:25 +0000 Received: from SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::883b:97ce:6565:e5e]) by SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::883b:97ce:6565:e5e%4]) with mapi id 15.20.7135.019; Thu, 28 Dec 2023 15:16:25 +0000 From: "larry.lai" To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz, krzk@kernel.org Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, "larry.lai" , Gary Wang Subject: [PATCH V8 3/3] leds: Add support for UP board CPLD onboard LEDS Date: Thu, 28 Dec 2023 23:15:44 +0800 Message-Id: <20231228151544.14408-4-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20231228151544.14408-1-larry.lai@yunjingtech.com> References: <20231228151544.14408-1-larry.lai@yunjingtech.com> X-ClientProxiedBy: SG2P153CA0039.APCP153.PROD.OUTLOOK.COM (2603:1096:4:c6::8) To SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) Precedence: bulk X-Mailing-List: linux-gpio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SEYPR06MB6507:EE_|KL1PR06MB6650:EE_ X-MS-Office365-Filtering-Correlation-Id: de33075a-222e-48a2-3608-08dc07b7f53a X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SEYPR06MB6507.apcprd06.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230031)(366004)(136003)(396003)(39830400003)(346002)(376002)(230273577357003)(230173577357003)(230922051799003)(64100799003)(186009)(451199024)(1800799012)(38350700005)(86362001)(2906002)(38100700002)(36756003)(41300700001)(66946007)(54906003)(66476007)(316002)(66556008)(83380400001)(6486002)(6506007)(52116002)(1076003)(26005)(478600001)(2616005)(6666004)(5660300002)(4326008)(8936002)(8676002)(6512007); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: de33075a-222e-48a2-3608-08dc07b7f53a X-MS-Exchange-CrossTenant-AuthSource: SEYPR06MB6507.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 28 Dec 2023 15:16:25.6118 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: Nkobwr2g1TQthVBXumGveoD3X0tIXMoI96sGaIVrYBOwpCrdn0cZ01O28dEMKTql8coqZHazR3/BjnnvZphsN+8NaN6lKz6ica+x/noMEaY= X-MS-Exchange-Transport-CrossTenantHeadersStamped: KL1PR06MB6650 The UP boards come with a few FPGA-controlled onboard LEDs: * UP Board: yellow, green, red * UP Squared: blue, yellow, green, red Signed-off-by: Gary Wang Signed-off-by: larry.lai --- PATCH V7 -> PATCH V8 (1) Refer 2023/11/01 Krzysztof Kozlowski review, cleaned up coding style and addressed review comments. PATCH V6 --> PATCH V7: cleaned up coding style and addressed review comments. PATCH V4 -> PATCH V6 : There is no change. RFC 2023/04/25 -> PATCH V4 (1) Fixed kernel test robot compiler warning. (2) Remove mistakes with wrong Reviewed-by tags. RFC 2022/11/23 --> RFC 2023/04/25: Refer 2022/12/08 Lee Jones review, cleaned up coding style. PATCH V3 -> RFC 2022/11/23: Update the changes Copyright. PATCH V1 -> V3: There is no change. PATCH --> PATCH V1: Refer 2022/10/03 Andy Shevchenko review, cleaned up coding style. --- drivers/leds/Kconfig | 10 +++ drivers/leds/Makefile | 1 + drivers/leds/leds-upboard.c | 154 ++++++++++++++++++++++++++++++++++++ 3 files changed, 165 insertions(+) create mode 100644 drivers/leds/leds-upboard.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 499d0f215a8b..80b9c394c5b6 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -872,6 +872,16 @@ source "drivers/leds/flash/Kconfig" comment "RGB LED drivers" source "drivers/leds/rgb/Kconfig" +config LEDS_UPBOARD + tristate "LED support for the UP board" + depends on LEDS_CLASS + depends on MFD_UPBOARD_FPGA + help + This option enables support for the UP board LEDs. + + To compile this driver as a module, choose M here: the module + will be called leds-upboard. + comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 4fd2f92cd198..e72956645646 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -83,6 +83,7 @@ obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o obj-$(CONFIG_LEDS_TLC591XX) += leds-tlc591xx.o obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o obj-$(CONFIG_LEDS_TURRIS_OMNIA) += leds-turris-omnia.o +obj-$(CONFIG_LEDS_UPBOARD) += leds-upboard.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o diff --git a/drivers/leds/leds-upboard.c b/drivers/leds/leds-upboard.c new file mode 100644 index 000000000000..61164402926e --- /dev/null +++ b/drivers/leds/leds-upboard.c @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board CPLD/GPIO based LED driver + * + * Copyright (c) AAEON. All rights reserved. + * + * Author: Gary Wang + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct upboard_led { + struct regmap_field *field; + struct led_classdev cdev; + unsigned char bit; +}; + +static enum led_brightness upboard_led_brightness_get(struct led_classdev *cdev) +{ + struct upboard_led *led = container_of(cdev, struct upboard_led, cdev); + int brightness = 0; + + regmap_field_read(led->field, &brightness); + + return brightness; +}; + +static void upboard_led_brightness_set(struct led_classdev *cdev, enum led_brightness brightness) +{ + struct upboard_led *led = container_of(cdev, struct upboard_led, cdev); + + regmap_field_write(led->field, brightness != LED_OFF); +}; + +static struct gpio_led_platform_data upboard_gpio_led_pd; +static const struct mfd_cell upboard_gpio_led_cells[] = { + MFD_CELL_BASIC("leds-gpio", NULL, + &upboard_gpio_led_pd, + sizeof(upboard_gpio_led_pd), 0) +}; + +static int upboard_led_gpio_register(struct upboard_fpga *fpga) +{ + struct gpio_led blue_led, yellow_led, green_led, red_led; + struct gpio_desc *desc; + static struct gpio_led leds[4]; + int num_leds = 0; + int ret; + + desc = devm_gpiod_get(fpga->dev, "blue", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + blue_led.name = "upboard:blue:"; + blue_led.gpio = desc_to_gpio(desc); + blue_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + leds[num_leds++] = blue_led; + devm_gpiod_put(fpga->dev, desc); + } + + desc = devm_gpiod_get(fpga->dev, "yellow", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + yellow_led.name = "upboard:yellow:"; + yellow_led.gpio = desc_to_gpio(desc); + yellow_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + leds[num_leds++] = yellow_led; + devm_gpiod_put(fpga->dev, desc); + } + + desc = devm_gpiod_get(fpga->dev, "green", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + green_led.name = "upboard:green:"; + green_led.gpio = desc_to_gpio(desc); + green_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + leds[num_leds++] = green_led; + devm_gpiod_put(fpga->dev, desc); + } + + desc = devm_gpiod_get(fpga->dev, "red", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + red_led.name = "upboard:red:"; + red_led.gpio = desc_to_gpio(desc); + red_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + leds[num_leds++] = red_led; + devm_gpiod_put(fpga->dev, desc); + } + + /* No optional LEDs defined */ + if (num_leds == 0) + return -ENODEV; + + upboard_gpio_led_pd.num_leds = num_leds; + upboard_gpio_led_pd.leds = leds; + + ret = devm_mfd_add_devices(fpga->dev, PLATFORM_DEVID_AUTO, + upboard_gpio_led_cells, + ARRAY_SIZE(upboard_gpio_led_cells), + NULL, 0, NULL); + if (ret) { + dev_err(fpga->dev, "Failed to add GPIO LEDs, %d", ret); + return ret; + } + + return 0; +} + +static int upboard_led_probe(struct platform_device *pdev) +{ + struct upboard_fpga * const cpld = dev_get_drvdata(pdev->dev.parent); + struct reg_field fldconf = { + .reg = UPFPGA_REG_FUNC_EN0, + }; + struct upboard_led_data * const pdata = pdev->dev.platform_data; + struct upboard_led *led; + + /* check & register GPIO LEDs */ + if (strstr(pdata->colour, "gpio")) + return upboard_led_gpio_register(cpld); + + led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + fldconf.lsb = pdata->bit; + fldconf.msb = pdata->bit; + led->field = devm_regmap_field_alloc(&pdev->dev, cpld->regmap, fldconf); + if (IS_ERR(led->field)) + return PTR_ERR(led->field); + + led->cdev.brightness_get = upboard_led_brightness_get; + led->cdev.brightness_set = upboard_led_brightness_set; + led->cdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "upboard:%s:", pdata->colour); + if (!led->cdev.name) + return -ENOMEM; + + return devm_led_classdev_register(&pdev->dev, &led->cdev); +}; + +static struct platform_driver upboard_led_driver = { + .driver = { + .name = "upboard-led", + }, +}; +module_platform_driver_probe(upboard_led_driver, upboard_led_probe); + +MODULE_AUTHOR("Gary Wang "); +MODULE_DESCRIPTION("UP Board LED driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:upboard-led");