From patchwork Thu Jun 22 12:56:54 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Shawn Guo X-Patchwork-Id: 106208 Delivered-To: patch@linaro.org Received: by 10.182.29.35 with SMTP id g3csp119123obh; Thu, 22 Jun 2017 05:58:30 -0700 (PDT) X-Received: by 10.84.143.100 with SMTP id 91mr2870891ply.186.1498136310691; Thu, 22 Jun 2017 05:58:30 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1498136310; cv=none; d=google.com; s=arc-20160816; b=jumT6l4Xoa9ITheUonL+ljKBZ+q6Svm1J1K5jw13TLCwbGvVcpkHWFt4n3VvJ8kEi+ h/y6Fsk/QLD+3jczeScKqypkTbBlVndkJAv8/c4GI02AaXDFVbA21XLUPOQyUgkkx9GE R+lDjwI3smM1AbgOfOQZGjngQBVc8Ill26zfIBHOb064ptvmuy2VNMLjYnTjpC6VmPD1 nQowKRwIuWbIGGPecK9pQ+qWhjye60CBLkoj/RxH/BQoTkYvA1vhjcPjbc2ANcqnXyPB oAM2++8bALs5nYkcJvzILJ1Zv1dNv1bAr9SA5075/AcsPIKuTJXfuO2g3yPbcDD8yfOf phXQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:dmarc-filter:arc-authentication-results; bh=AaUvKPTHT3GMvubyuK+lw4X7AkEPCWITZUgz5pO+yuQ=; b=uXKngm/6jR1MunupNQDW8XPQcG+pfYUIyoPHT+ZSmL1GJqTFMYx3c2bz2GZGigsBbu GbWPPn/daC13sqSF1FO2V0Mbn+U9jcxwMrzezqeXVBhy7z5UmISz3QPQgG2FryLO/7xz 0F3/z0lBvMr9Yt+ZNcd2X7E9sD56TQDuzTHxVg/cBH/FzoWk/KmfJ6FHEyhrJWDoyKeM LuDDFrzPm5PCwW24wLUYOay2EcnsidI67DxPxJ8BePjZb4Ud2oRgrVi2UsapRG+xmP07 u/eNcYw9smpIm8IKEDz6lT/AKNVRpMMO+ZktOuCkTwagwVtYjD7lXkWj6QA5kgOmaA8k f68g== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-i2c-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-i2c-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id x13si161907pff.83.2017.06.22.05.58.30; Thu, 22 Jun 2017 05:58:30 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-i2c-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-i2c-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-i2c-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751164AbdFVM6a (ORCPT + 1 other); Thu, 22 Jun 2017 08:58:30 -0400 Received: from mail.kernel.org ([198.145.29.99]:57670 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750847AbdFVM63 (ORCPT ); Thu, 22 Jun 2017 08:58:29 -0400 Received: from localhost.localdomain (li411-102.members.linode.com [106.187.91.102]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id 1B40922B60; Thu, 22 Jun 2017 12:58:24 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 1B40922B60 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=shawnguo@kernel.org From: Shawn Guo To: Wolfram Sang Cc: Baoyou Xie , Xin Zhou , Jun Nie , linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Baoyou Xie , Shawn Guo Subject: [PATCH v2 1/2] dt: bindings: add documentation for zx2967 family i2c controller Date: Thu, 22 Jun 2017 20:56:54 +0800 Message-Id: <1498136215-8102-2-git-send-email-shawnguo@kernel.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1498136215-8102-1-git-send-email-shawnguo@kernel.org> References: <1498136215-8102-1-git-send-email-shawnguo@kernel.org> Sender: linux-i2c-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-i2c@vger.kernel.org From: Baoyou Xie This patch adds dt-binding documentation for zx2967 family i2c controller. Signed-off-by: Baoyou Xie Acked-by: Rob Herring Signed-off-by: Shawn Guo --- .../devicetree/bindings/i2c/i2c-zx2967.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-zx2967.txt -- 1.9.1 diff --git a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt new file mode 100644 index 000000000000..cb806d1ae4c9 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt @@ -0,0 +1,22 @@ +ZTE zx2967 I2C controller + +Required properties: + - compatible: must be "zte,zx296718-i2c" + - reg: physical address and length of the device registers + - interrupts: a single interrupt specifier + - clocks: clock for the device + - #address-cells: should be <1> + - #size-cells: should be <0> + - clock-frequency: the desired I2C bus clock frequency. + +Examples: + + i2c@112000 { + compatible = "zte,zx296718-i2c"; + reg = <0x00112000 0x1000>; + interrupts = ; + clocks = <&osc24m>; + #address-cells = <1> + #size-cells = <0>; + clock-frequency = <1600000>; + }; From patchwork Thu Jun 22 12:56:55 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Shawn Guo X-Patchwork-Id: 106209 Delivered-To: patch@linaro.org Received: by 10.182.29.35 with SMTP id g3csp119150obh; Thu, 22 Jun 2017 05:58:35 -0700 (PDT) X-Received: by 10.84.232.3 with SMTP id h3mr2797678plk.42.1498136314982; Thu, 22 Jun 2017 05:58:34 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1498136314; cv=none; d=google.com; s=arc-20160816; b=FiWj3qRHReSnaIdL20shOTC6NnPWrTxzyheYrRahO6vnoIYa5mdSuLyUo9gMhio12s gbksWZYz2Gy7fWauKYU9c1jb8B3zVY3LYpaTh8ivy3EkTTqEqejQQodwyBaK8wxO2k1D Oc0fDoU7mvvQtEaEbkXwSTL0MFbHBtkd+0npNrVDMpHFsXpVtWIbcdbDEba60Cd5ZqX1 EX8MFKcbjbHkrjae0CsBjfTpbWKe0Inw29/M8cZrkaadcSrPE02ryW755Io++T+Bw8Ry T/xbBxDnJsgJE3Gs5PVnh0Eu03ZCxtPM85ii3coMKibt+0/dsFXB30G6O6+PU4qhVNjW 35eg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:dmarc-filter:arc-authentication-results; bh=y9HRhe89ge5KT2wJbMN6Vj+JozVY8ic+ZY35VseC9RU=; b=ObI/qxq/v+lK90KXhN2fwI1IfCnHFyg42BZ3BP6zRr2ZR0apLE4oIQm+n7D5LsK4fw JYew0uE3I0n6jad9wLEGqJILL59seI9+JKf/ligCa37RmuKEExNXj7KgaBmuA6tTT3Ci pBBWhEEy2uV819cdtECAptLdB2kI0vKq7iD8qWOl+Oj7i4iaClC6Riq5E57gAbizyfV+ c+itqIjmXFDMqydMhy9r8h2a8h0e8dv49ONnn9PFM/ur4961w/ulG8os2L6fYXN3Od81 Hc7fb/uKf5E67h+ZtKeNu6SS3J3Qg2A+mZdjj/hcuXpGjoMHDouMezOyYvcnLPnSspFY qhmg== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-i2c-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-i2c-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id x13si161907pff.83.2017.06.22.05.58.34; Thu, 22 Jun 2017 05:58:34 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-i2c-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-i2c-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-i2c-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751221AbdFVM6e (ORCPT + 1 other); Thu, 22 Jun 2017 08:58:34 -0400 Received: from mail.kernel.org ([198.145.29.99]:57688 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750847AbdFVM6d (ORCPT ); Thu, 22 Jun 2017 08:58:33 -0400 Received: from localhost.localdomain (li411-102.members.linode.com [106.187.91.102]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id 667DD22B62; Thu, 22 Jun 2017 12:58:29 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 667DD22B62 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=shawnguo@kernel.org From: Shawn Guo To: Wolfram Sang Cc: Baoyou Xie , Xin Zhou , Jun Nie , linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Baoyou Xie , Shawn Guo Subject: [PATCH v2 2/2] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family Date: Thu, 22 Jun 2017 20:56:55 +0800 Message-Id: <1498136215-8102-3-git-send-email-shawnguo@kernel.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1498136215-8102-1-git-send-email-shawnguo@kernel.org> References: <1498136215-8102-1-git-send-email-shawnguo@kernel.org> Sender: linux-i2c-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-i2c@vger.kernel.org From: Baoyou Xie This patch adds i2c controller driver for ZTE's zx2967 family. Signed-off-by: Baoyou Xie Reviewed-by: Andy Shevchenko Reviewed-by: Jun Nie Signed-off-by: Shawn Guo --- drivers/i2c/busses/Kconfig | 9 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-zx2967.c | 609 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 619 insertions(+) create mode 100644 drivers/i2c/busses/i2c-zx2967.c -- 1.9.1 diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index ed7106e48ba4..ec1f305294a6 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1260,4 +1260,13 @@ config I2C_OPAL This driver can also be built as a module. If so, the module will be called as i2c-opal. +config I2C_ZX2967 + tristate "ZTE ZX2967 I2C support" + depends on ARCH_ZX || COMPILE_TEST + default y + help + Selecting this option will add ZX2967 I2C driver. + This driver can also be built as a module. If so, the module will be + called i2c-zx2967. + endmenu diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index c89a4314c563..cdc65d8c3790 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -103,6 +103,7 @@ obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o obj-$(CONFIG_I2C_XLR) += i2c-xlr.o obj-$(CONFIG_I2C_XLP9XX) += i2c-xlp9xx.o obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o +obj-$(CONFIG_I2C_ZX2967) += i2c-zx2967.o # External I2C/SMBus adapter drivers obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o diff --git a/drivers/i2c/busses/i2c-zx2967.c b/drivers/i2c/busses/i2c-zx2967.c new file mode 100644 index 000000000000..3e381edc0f22 --- /dev/null +++ b/drivers/i2c/busses/i2c-zx2967.c @@ -0,0 +1,609 @@ +/* + * Copyright (C) 2017 Sanechips Technology Co., Ltd. + * Copyright 2017 Linaro Ltd. + * + * Author: Baoyou Xie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#define REG_CMD 0x04 +#define REG_DEVADDR_H 0x0C +#define REG_DEVADDR_L 0x10 +#define REG_CLK_DIV_FS 0x14 +#define REG_CLK_DIV_HS 0x18 +#define REG_WRCONF 0x1C +#define REG_RDCONF 0x20 +#define REG_DATA 0x24 +#define REG_STAT 0x28 + +#define I2C_STOP 0 +#define I2C_MASTER BIT(0) +#define I2C_ADDR_MODE_TEN BIT(1) +#define I2C_IRQ_MSK_ENABLE BIT(3) +#define I2C_RW_READ BIT(4) +#define I2C_CMB_RW_EN BIT(5) +#define I2C_START BIT(6) + +#define I2C_ADDR_LOW_MASK GENMASK(6, 0) +#define I2C_ADDR_LOW_SHIFT 0 +#define I2C_ADDR_HI_MASK GENMASK(2, 0) +#define I2C_ADDR_HI_SHIFT 7 + +#define I2C_WFIFO_RESET BIT(7) +#define I2C_RFIFO_RESET BIT(7) + +#define I2C_IRQ_ACK_CLEAR BIT(7) +#define I2C_INT_MASK GENMASK(6, 0) + +#define I2C_TRANS_DONE BIT(0) +#define I2C_SR_EDEVICE BIT(1) +#define I2C_SR_EDATA BIT(2) + +#define I2C_FIFO_MAX 16 + +#define I2C_TIMEOUT msecs_to_jiffies(1000) + +#define DEV(i2c) (&i2c->adap.dev) + +struct zx2967_i2c { + struct i2c_adapter adap; + struct clk *clk; + struct completion complete; + u32 clk_freq; + void __iomem *reg_base; + size_t residue; + int irq; + int msg_rd; + u8 *cur_trans; + u8 access_cnt; + bool is_suspended; + int error; +}; + +static void zx2967_i2c_writel(struct zx2967_i2c *i2c, + u32 val, unsigned long reg) +{ + writel_relaxed(val, i2c->reg_base + reg); +} + +static u32 zx2967_i2c_readl(struct zx2967_i2c *i2c, unsigned long reg) +{ + return readl_relaxed(i2c->reg_base + reg); +} + +static void zx2967_i2c_writesb(struct zx2967_i2c *i2c, + void *data, unsigned long reg, int len) +{ + writesb(i2c->reg_base + reg, data, len); +} + +static void zx2967_i2c_readsb(struct zx2967_i2c *i2c, + void *data, unsigned long reg, int len) +{ + readsb(i2c->reg_base + reg, data, len); +} + +static void zx2967_i2c_start_ctrl(struct zx2967_i2c *i2c) +{ + u32 status; + u32 ctl; + + status = zx2967_i2c_readl(i2c, REG_STAT); + status |= I2C_IRQ_ACK_CLEAR; + zx2967_i2c_writel(i2c, status, REG_STAT); + + ctl = zx2967_i2c_readl(i2c, REG_CMD); + if (i2c->msg_rd) + ctl |= I2C_RW_READ; + else + ctl &= ~I2C_RW_READ; + ctl &= ~I2C_CMB_RW_EN; + ctl |= I2C_START; + zx2967_i2c_writel(i2c, ctl, REG_CMD); +} + +static void zx2967_i2c_flush_fifos(struct zx2967_i2c *i2c) +{ + u32 offset; + u32 val; + + if (i2c->msg_rd) { + offset = REG_RDCONF; + val = I2C_RFIFO_RESET; + } else { + offset = REG_WRCONF; + val = I2C_WFIFO_RESET; + } + + val |= zx2967_i2c_readl(i2c, offset); + zx2967_i2c_writel(i2c, val, offset); +} + +static int zx2967_i2c_empty_rx_fifo(struct zx2967_i2c *i2c, u32 size) +{ + u8 val[I2C_FIFO_MAX] = {0}; + int i; + + if (size > I2C_FIFO_MAX) { + dev_err(DEV(i2c), "fifo size %d over the max value %d\n", + size, I2C_FIFO_MAX); + return -EINVAL; + } + + zx2967_i2c_readsb(i2c, val, REG_DATA, size); + for (i = 0; i < size; i++) { + *i2c->cur_trans++ = val[i]; + i2c->residue--; + } + + barrier(); + + return 0; +} + +static int zx2967_i2c_fill_tx_fifo(struct zx2967_i2c *i2c) +{ + size_t residue = i2c->residue; + u8 *buf = i2c->cur_trans; + + if (residue == 0) { + dev_err(DEV(i2c), "residue is %d\n", (int)residue); + return -EINVAL; + } + + if (residue <= I2C_FIFO_MAX) { + zx2967_i2c_writesb(i2c, buf, REG_DATA, residue); + + /* Again update before writing to FIFO to make sure isr sees. */ + i2c->residue = 0; + i2c->cur_trans = NULL; + } else { + zx2967_i2c_writesb(i2c, buf, REG_DATA, I2C_FIFO_MAX); + i2c->residue -= I2C_FIFO_MAX; + i2c->cur_trans += I2C_FIFO_MAX; + } + + barrier(); + + return 0; +} + +static int zx2967_i2c_reset_hardware(struct zx2967_i2c *i2c) +{ + u32 val; + u32 clk_div; + + val = I2C_MASTER | I2C_IRQ_MSK_ENABLE; + zx2967_i2c_writel(i2c, val, REG_CMD); + + clk_div = clk_get_rate(i2c->clk) / i2c->clk_freq - 1; + zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_FS); + zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_HS); + + zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_WRCONF); + zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_RDCONF); + zx2967_i2c_writel(i2c, 1, REG_RDCONF); + + zx2967_i2c_flush_fifos(i2c); + + return 0; +} + +static void zx2967_i2c_isr_clr(struct zx2967_i2c *i2c) +{ + u32 status; + + status = zx2967_i2c_readl(i2c, REG_STAT); + status |= I2C_IRQ_ACK_CLEAR; + zx2967_i2c_writel(i2c, status, REG_STAT); +} + +static irqreturn_t zx2967_i2c_isr(int irq, void *dev_id) +{ + u32 status; + struct zx2967_i2c *i2c = (struct zx2967_i2c *)dev_id; + + status = zx2967_i2c_readl(i2c, REG_STAT) & I2C_INT_MASK; + zx2967_i2c_isr_clr(i2c); + + if (status & I2C_SR_EDEVICE) + i2c->error = -ENXIO; + else if (status & I2C_SR_EDATA) + i2c->error = -EIO; + else if (status & I2C_TRANS_DONE) + i2c->error = 0; + else + goto done; + + complete(&i2c->complete); +done: + return IRQ_HANDLED; +} + +static void zx2967_set_addr(struct zx2967_i2c *i2c, u16 addr) +{ + u16 val; + + val = (addr >> I2C_ADDR_LOW_SHIFT) & I2C_ADDR_LOW_MASK; + zx2967_i2c_writel(i2c, val, REG_DEVADDR_L); + + val = (addr >> I2C_ADDR_HI_SHIFT) & I2C_ADDR_HI_MASK; + zx2967_i2c_writel(i2c, val, REG_DEVADDR_H); + if (val) + val = zx2967_i2c_readl(i2c, REG_CMD) | I2C_ADDR_MODE_TEN; + else + val = zx2967_i2c_readl(i2c, REG_CMD) & ~I2C_ADDR_MODE_TEN; + zx2967_i2c_writel(i2c, val, REG_CMD); +} + +static int zx2967_i2c_xfer_bytes(struct zx2967_i2c *i2c, u32 bytes) +{ + unsigned long time_left; + int rd = i2c->msg_rd; + int ret; + + reinit_completion(&i2c->complete); + + if (rd) { + zx2967_i2c_writel(i2c, bytes - 1, REG_RDCONF); + } else { + ret = zx2967_i2c_fill_tx_fifo(i2c); + if (ret) + return ret; + } + + zx2967_i2c_start_ctrl(i2c); + + time_left = wait_for_completion_timeout(&i2c->complete, + I2C_TIMEOUT); + if (time_left == 0) + return -ETIMEDOUT; + + if (i2c->error) + return i2c->error; + + return rd ? zx2967_i2c_empty_rx_fifo(i2c, bytes) : 0; +} + +static int zx2967_i2c_xfer_msg(struct zx2967_i2c *i2c, + struct i2c_msg *msg) +{ + int ret; + int i; + + if (msg->len == 0) + return -EINVAL; + + zx2967_i2c_flush_fifos(i2c); + + i2c->cur_trans = msg->buf; + i2c->residue = msg->len; + i2c->access_cnt = msg->len / I2C_FIFO_MAX; + i2c->msg_rd = msg->flags & I2C_M_RD; + + for (i = 0; i < i2c->access_cnt; i++) { + ret = zx2967_i2c_xfer_bytes(i2c, I2C_FIFO_MAX); + if (ret) + return ret; + } + + if (i2c->residue > 0) { + ret = zx2967_i2c_xfer_bytes(i2c, i2c->residue); + if (ret) + return ret; + } + + i2c->residue = 0; + i2c->access_cnt = 0; + + return 0; +} + +static int zx2967_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct zx2967_i2c *i2c = i2c_get_adapdata(adap); + int ret; + int i; + + if (i2c->is_suspended) + return -EBUSY; + + zx2967_set_addr(i2c, msgs->addr); + + for (i = 0; i < num; i++) { + ret = zx2967_i2c_xfer_msg(i2c, &msgs[i]); + if (ret) + return ret; + } + + return num; +} + +static void +zx2967_smbus_xfer_prepare(struct zx2967_i2c *i2c, u16 addr, + char read_write, u8 command, int size, + union i2c_smbus_data *data) +{ + u32 val; + + val = zx2967_i2c_readl(i2c, REG_RDCONF); + val |= I2C_RFIFO_RESET; + zx2967_i2c_writel(i2c, val, REG_RDCONF); + zx2967_set_addr(i2c, addr); + val = zx2967_i2c_readl(i2c, REG_CMD); + val &= ~I2C_RW_READ; + zx2967_i2c_writel(i2c, val, REG_CMD); + + switch (size) { + case I2C_SMBUS_BYTE: + zx2967_i2c_writel(i2c, command, REG_DATA); + break; + case I2C_SMBUS_BYTE_DATA: + zx2967_i2c_writel(i2c, command, REG_DATA); + if (read_write == I2C_SMBUS_WRITE) + zx2967_i2c_writel(i2c, data->byte, REG_DATA); + break; + case I2C_SMBUS_WORD_DATA: + zx2967_i2c_writel(i2c, command, REG_DATA); + if (read_write == I2C_SMBUS_WRITE) { + zx2967_i2c_writel(i2c, (data->word >> 8), REG_DATA); + zx2967_i2c_writel(i2c, (data->word & 0xff), + REG_DATA); + } + break; + } +} + +static int zx2967_smbus_xfer_read(struct zx2967_i2c *i2c, int size, + union i2c_smbus_data *data) +{ + unsigned long time_left; + u8 buf[2]; + u32 val; + + reinit_completion(&i2c->complete); + + val = zx2967_i2c_readl(i2c, REG_CMD); + val |= I2C_CMB_RW_EN; + zx2967_i2c_writel(i2c, val, REG_CMD); + + val = zx2967_i2c_readl(i2c, REG_CMD); + val |= I2C_START; + zx2967_i2c_writel(i2c, val, REG_CMD); + + time_left = wait_for_completion_timeout(&i2c->complete, + I2C_TIMEOUT); + if (time_left == 0) + return -ETIMEDOUT; + + if (i2c->error) + return i2c->error; + + switch (size) { + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + val = zx2967_i2c_readl(i2c, REG_DATA); + data->byte = val; + break; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + buf[0] = zx2967_i2c_readl(i2c, REG_DATA); + buf[1] = zx2967_i2c_readl(i2c, REG_DATA); + data->word = (buf[0] << 8) | buf[1]; + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int zx2967_smbus_xfer_write(struct zx2967_i2c *i2c) +{ + unsigned long time_left; + u32 val; + + reinit_completion(&i2c->complete); + val = zx2967_i2c_readl(i2c, REG_CMD); + val |= I2C_START; + zx2967_i2c_writel(i2c, val, REG_CMD); + + time_left = wait_for_completion_timeout(&i2c->complete, + I2C_TIMEOUT); + if (time_left == 0) + return -ETIMEDOUT; + + if (i2c->error) + return i2c->error; + + return 0; +} + +static int zx2967_smbus_xfer(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data) +{ + struct zx2967_i2c *i2c = i2c_get_adapdata(adap); + + if (size == I2C_SMBUS_QUICK) + read_write = I2C_SMBUS_WRITE; + + switch (size) { + case I2C_SMBUS_QUICK: + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + case I2C_SMBUS_WORD_DATA: + zx2967_smbus_xfer_prepare(i2c, addr, read_write, + command, size, data); + break; + default: + return -EOPNOTSUPP; + } + + if (read_write == I2C_SMBUS_READ) + return zx2967_smbus_xfer_read(i2c, size, data); + + return zx2967_smbus_xfer_write(i2c); +} + +static u32 zx2967_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | + I2C_FUNC_SMBUS_QUICK | + I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | + I2C_FUNC_SMBUS_PROC_CALL | + I2C_FUNC_SMBUS_I2C_BLOCK; +} + +static int __maybe_unused zx2967_i2c_suspend(struct device *dev) +{ + struct zx2967_i2c *i2c = dev_get_drvdata(dev); + + i2c->is_suspended = true; + clk_disable_unprepare(i2c->clk); + + return 0; +} + +static int __maybe_unused zx2967_i2c_resume(struct device *dev) +{ + struct zx2967_i2c *i2c = dev_get_drvdata(dev); + + i2c->is_suspended = false; + clk_prepare_enable(i2c->clk); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(zx2967_i2c_dev_pm_ops, + zx2967_i2c_suspend, zx2967_i2c_resume); + +static const struct i2c_algorithm zx2967_i2c_algo = { + .master_xfer = zx2967_i2c_xfer, + .smbus_xfer = zx2967_smbus_xfer, + .functionality = zx2967_i2c_func, +}; + +static const struct of_device_id zx2967_i2c_of_match[] = { + { .compatible = "zte,zx296718-i2c", }, + { }, +}; +MODULE_DEVICE_TABLE(of, zx2967_i2c_of_match); + +static int zx2967_i2c_probe(struct platform_device *pdev) +{ + struct zx2967_i2c *i2c; + void __iomem *reg_base; + struct resource *res; + struct clk *clk; + int ret; + + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(reg_base)) + return PTR_ERR(reg_base); + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "missing controller clock"); + return PTR_ERR(clk); + } + + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable i2c_clk\n"); + return ret; + } + + ret = device_property_read_u32(&pdev->dev, "clock-frequency", + &i2c->clk_freq); + if (ret) { + dev_err(&pdev->dev, "missing clock-frequency"); + return ret; + } + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + + i2c->irq = ret; + i2c->reg_base = reg_base; + i2c->clk = clk; + + init_completion(&i2c->complete); + platform_set_drvdata(pdev, i2c); + + ret = zx2967_i2c_reset_hardware(i2c); + if (ret) { + dev_err(&pdev->dev, "failed to initialize i2c controller\n"); + goto err_clk_unprepare; + } + + ret = devm_request_irq(&pdev->dev, i2c->irq, + zx2967_i2c_isr, 0, dev_name(&pdev->dev), i2c); + if (ret) { + dev_err(&pdev->dev, "failed to request irq %i\n", i2c->irq); + goto err_clk_unprepare; + } + + i2c_set_adapdata(&i2c->adap, i2c); + strlcpy(i2c->adap.name, "zx2967 i2c adapter", + sizeof(i2c->adap.name)); + i2c->adap.algo = &zx2967_i2c_algo; + i2c->adap.nr = pdev->id; + i2c->adap.dev.parent = &pdev->dev; + i2c->adap.dev.of_node = pdev->dev.of_node; + + ret = i2c_add_numbered_adapter(&i2c->adap); + if (ret) + goto err_clk_unprepare; + + return 0; + +err_clk_unprepare: + clk_disable_unprepare(i2c->clk); + return ret; +} + +static int zx2967_i2c_remove(struct platform_device *pdev) +{ + struct zx2967_i2c *i2c = platform_get_drvdata(pdev); + + i2c_del_adapter(&i2c->adap); + clk_disable_unprepare(i2c->clk); + + return 0; +} + +static struct platform_driver zx2967_i2c_driver = { + .probe = zx2967_i2c_probe, + .remove = zx2967_i2c_remove, + .driver = { + .name = "zx2967_i2c", + .of_match_table = zx2967_i2c_of_match, + .pm = &zx2967_i2c_dev_pm_ops, + }, +}; +module_platform_driver(zx2967_i2c_driver); + +MODULE_AUTHOR("Baoyou Xie "); +MODULE_DESCRIPTION("ZTE ZX2967 I2C Bus Controller driver"); +MODULE_LICENSE("GPL v2");