From patchwork Wed Mar 18 14:47:36 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243816 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:36 +0200 Subject: [PATCH v2 01/14] drivers: net: add Layerscape mEMAC MDIO driver In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-2-ioana.ciornei@nxp.com> Add a driver for the MDIO interface integrated in the mEMAC (Multi-rate Ethernet Media Access Controller) and the Fman 10G Ethernet MACs. Signed-off-by: Ioana Ciornei --- Changes in v2: - refactor the mdio read/write code for code reuse drivers/net/Kconfig | 7 ++ drivers/net/Makefile | 1 + drivers/net/fsl_ls_mdio.c | 146 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 154 insertions(+) create mode 100644 drivers/net/fsl_ls_mdio.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 4d1013c98466..bc518f218da6 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -640,4 +640,11 @@ config MVMDIO This driver is used by the MVPP2 and MVNETA drivers. +config FSL_LS_MDIO + bool "NXP Layerscape MDIO interface support" + depends on DM_MDIO + help + This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and + on the mEMAC (which supports both Clauses 22 and 45). + endif # NETDEVICES diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 6e0a68834d97..6d9b8772b1a5 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -83,3 +83,4 @@ obj-y += mscc_eswitch/ obj-$(CONFIG_HIGMACV300_ETH) += higmacv300.o obj-$(CONFIG_MDIO_SANDBOX) += mdio_sandbox.o obj-$(CONFIG_FSL_ENETC) += fsl_enetc.o fsl_enetc_mdio.o +obj-$(CONFIG_FSL_LS_MDIO) += fsl_ls_mdio.o diff --git a/drivers/net/fsl_ls_mdio.c b/drivers/net/fsl_ls_mdio.c new file mode 100644 index 000000000000..6d8332d19ae0 --- /dev/null +++ b/drivers/net/fsl_ls_mdio.c @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 NXP + */ + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_SYS_MEMAC_LITTLE_ENDIAN +#define memac_out_32(a, v) out_le32(a, v) +#define memac_clrbits_32(a, v) clrbits_le32(a, v) +#define memac_setbits_32(a, v) setbits_le32(a, v) +#else +#define memac_out_32(a, v) out_be32(a, v) +#define memac_clrbits_32(a, v) clrbits_be32(a, v) +#define memac_setbits_32(a, v) setbits_be32(a, v) +#endif + +static u32 memac_in_32(u32 *reg) +{ +#ifdef CONFIG_SYS_MEMAC_LITTLE_ENDIAN + return in_le32(reg); +#else + return in_be32(reg); +#endif +} + +struct fsl_ls_mdio_priv { + void *regs_base; +}; + +static u32 fsl_ls_mdio_setup_operation(struct udevice *dev, int addr, int devad, + int reg) +{ + struct fsl_ls_mdio_priv *priv = dev_get_priv(dev); + struct memac_mdio_controller *regs; + u32 mdio_ctl; + u32 c45 = 1; + + regs = (struct memac_mdio_controller *)(priv->regs_base); + if (devad == MDIO_DEVAD_NONE) { + c45 = 0; /* clause 22 */ + devad = reg & 0x1f; + memac_clrbits_32(®s->mdio_stat, MDIO_STAT_ENC); + } else { + memac_setbits_32(®s->mdio_stat, MDIO_STAT_ENC); + } + + /* Wait till the bus is free */ + while ((memac_in_32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Set the Port and Device Addrs */ + mdio_ctl = MDIO_CTL_PORT_ADDR(addr) | MDIO_CTL_DEV_ADDR(devad); + memac_out_32(®s->mdio_ctl, mdio_ctl); + + /* Set the register address */ + if (c45) + memac_out_32(®s->mdio_addr, reg & 0xffff); + + /* Wait till the bus is free */ + while ((memac_in_32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + return mdio_ctl; +} + +static int dm_fsl_ls_mdio_read(struct udevice *dev, int addr, + int devad, int reg) +{ + struct fsl_ls_mdio_priv *priv = dev_get_priv(dev); + struct memac_mdio_controller *regs; + u32 mdio_ctl; + + regs = (struct memac_mdio_controller *)(priv->regs_base); + mdio_ctl = fsl_ls_mdio_setup_operation(dev, addr, devad, reg); + + /* Initiate the read */ + mdio_ctl |= MDIO_CTL_READ; + memac_out_32(®s->mdio_ctl, mdio_ctl); + + /* Wait till the MDIO write is complete */ + while ((memac_in_32(®s->mdio_data)) & MDIO_DATA_BSY) + ; + + /* Return all Fs if nothing was there */ + if (memac_in_32(®s->mdio_stat) & MDIO_STAT_RD_ER) + return 0xffff; + + return memac_in_32(®s->mdio_data) & 0xffff; +} + +static int dm_fsl_ls_mdio_write(struct udevice *dev, int addr, int devad, + int reg, u16 val) +{ + struct fsl_ls_mdio_priv *priv = dev_get_priv(dev); + struct memac_mdio_controller *regs; + + regs = (struct memac_mdio_controller *)(priv->regs_base); + fsl_ls_mdio_setup_operation(dev, addr, devad, reg); + + /* Write the value to the register */ + memac_out_32(®s->mdio_data, MDIO_DATA(val)); + + /* Wait till the MDIO write is complete */ + while ((memac_in_32(®s->mdio_data)) & MDIO_DATA_BSY) + ; + + return 0; +} + +static const struct mdio_ops fsl_ls_mdio_ops = { + .read = dm_fsl_ls_mdio_read, + .write = dm_fsl_ls_mdio_write, +}; + +static int fsl_ls_mdio_probe(struct udevice *dev) +{ + struct fsl_ls_mdio_priv *priv = dev_get_priv(dev); + struct memac_mdio_controller *regs; + + priv->regs_base = dev_read_addr_ptr(dev); + regs = (struct memac_mdio_controller *)(priv->regs_base); + + memac_setbits_32(®s->mdio_stat, + MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG); + + return 0; +} + +static const struct udevice_id fsl_ls_mdio_of_ids[] = { + { .compatible = "fsl,ls-mdio" }, +}; + +U_BOOT_DRIVER(fsl_ls_mdio) = { + .name = "fsl_ls_mdio", + .id = UCLASS_MDIO, + .of_match = fsl_ls_mdio_of_ids, + .probe = fsl_ls_mdio_probe, + .ops = &fsl_ls_mdio_ops, + .priv_auto_alloc_size = sizeof(struct fsl_ls_mdio_priv), +}; From patchwork Wed Mar 18 14:47:37 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243817 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:37 +0200 Subject: [PATCH v2 02/14] drivers: net: ldpaa: add support for probing based on the DTS In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-3-ioana.ciornei@nxp.com> When CONFIG_DM_ETH is enabled DPAA2 network interfaces will now probe based on DTS nodes with the "fsl,qoriq-mc-dpmac" compatible. In this case, transform the ldpaa_eth driver into a UCLASS_ETH driver and reuse the _open()/_tx()/_stop() functions already inplemented. For the moment, the ldpaa_eth driver will support both configurations: with or without CONFIG_DM_ETH enabled. Any 'struct eth_device' occurrence now has a matching 'struct udevice' made mutually exclusive based on the state of CONFIG_DM_ETH. Signed-off-by: Florin Laurentiu Chiculita Signed-off-by: Ioana Ciornei --- Changes in v2: - used the positive logic (ifdef CONFIG_DM_ETH instead of ifndef) drivers/net/ldpaa_eth/ldpaa_eth.c | 231 +++++++++++++++++++++++++----- drivers/net/ldpaa_eth/ldpaa_eth.h | 6 + 2 files changed, 205 insertions(+), 32 deletions(-) diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c b/drivers/net/ldpaa_eth/ldpaa_eth.c index a3b9c152b256..f589a482b734 100644 --- a/drivers/net/ldpaa_eth/ldpaa_eth.c +++ b/drivers/net/ldpaa_eth/ldpaa_eth.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -19,6 +20,19 @@ #include "ldpaa_eth.h" #ifdef CONFIG_PHYLIB +#ifdef CONFIG_DM_ETH +static void init_phy(struct udevice *dev) +{ + struct ldpaa_eth_priv *priv = dev_get_priv(dev); + + priv->phy = dm_eth_phy_connect(dev); + + if (!priv->phy) + return; + + phy_config(priv->phy); +} +#else static int init_phy(struct eth_device *dev) { struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)dev->priv; @@ -63,6 +77,7 @@ static int init_phy(struct eth_device *dev) return ret; } #endif +#endif #ifdef DEBUG @@ -128,9 +143,15 @@ static void ldpaa_eth_get_dpni_counter(void) } } +#ifdef CONFIG_DM_ETH +static void ldpaa_eth_get_dpmac_counter(struct udevice *dev) +{ + struct ldpaa_eth_priv *priv = dev_get_priv(dev); +#else static void ldpaa_eth_get_dpmac_counter(struct eth_device *net_dev) { struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv; +#endif int err = 0; u64 value; @@ -263,9 +284,16 @@ error: return; } +#ifdef CONFIG_DM_ETH +static int ldpaa_eth_pull_dequeue_rx(struct udevice *dev, + int flags, uchar **packetp) +{ + struct ldpaa_eth_priv *priv = dev_get_priv(dev); +#else static int ldpaa_eth_pull_dequeue_rx(struct eth_device *dev) { struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)dev->priv; +#endif const struct ldpaa_dq *dq; const struct dpaa_fd *fd; int i = 5, err = 0, status; @@ -322,9 +350,15 @@ static int ldpaa_eth_pull_dequeue_rx(struct eth_device *dev) return err; } +#ifdef CONFIG_DM_ETH +static int ldpaa_eth_tx(struct udevice *dev, void *buf, int len) +{ + struct ldpaa_eth_priv *priv = dev_get_priv(dev); +#else static int ldpaa_eth_tx(struct eth_device *net_dev, void *buf, int len) { struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv; +#endif struct dpaa_fd fd; u64 buffer_start; int data_offset, err; @@ -400,15 +434,32 @@ error: return err; } +static struct phy_device *ldpaa_get_phydev(struct ldpaa_eth_priv *priv) +{ +#ifdef CONFIG_DM_ETH + return priv->phy; +#else +#ifdef CONFIG_PHYLIB + struct phy_device *phydev = NULL; + int phy_num; + + /* start the phy devices one by one and update the dpmac state */ + for (phy_num = 0; phy_num < WRIOP_MAX_PHY_NUM; phy_num++) { + phydev = wriop_get_phy_dev(priv->dpmac_id, phy_num); + if (phydev) + return phydev; + } + return NULL; +#endif +#endif +} + static int ldpaa_get_dpmac_state(struct ldpaa_eth_priv *priv, struct dpmac_link_state *state) { phy_interface_t enet_if; - int phys_detected; -#ifdef CONFIG_PHYLIB struct phy_device *phydev = NULL; - int err, phy_num; -#endif + int err; /* let's start off with maximum capabilities */ enet_if = wriop_get_enet_if(priv->dpmac_id); @@ -420,39 +471,28 @@ static int ldpaa_get_dpmac_state(struct ldpaa_eth_priv *priv, state->rate = SPEED_1000; break; } - state->up = 1; - phys_detected = 0; -#ifdef CONFIG_PHYLIB + state->up = 1; state->options |= DPMAC_LINK_OPT_AUTONEG; + phydev = ldpaa_get_phydev(priv); - /* start the phy devices one by one and update the dpmac state */ - for (phy_num = 0; phy_num < WRIOP_MAX_PHY_NUM; phy_num++) { - phydev = wriop_get_phy_dev(priv->dpmac_id, phy_num); - if (!phydev) - continue; - - phys_detected++; + if (phydev) { err = phy_startup(phydev); if (err) { printf("%s: Could not initialize\n", phydev->dev->name); state->up = 0; - break; - } - if (phydev->link) { + } else if (phydev->link) { state->rate = min(state->rate, (uint32_t)phydev->speed); if (!phydev->duplex) state->options |= DPMAC_LINK_OPT_HALF_DUPLEX; if (!phydev->autoneg) state->options &= ~DPMAC_LINK_OPT_AUTONEG; } else { - /* break out of loop even if one phy is down */ state->up = 0; - break; } } -#endif - if (!phys_detected) + + if (!phydev) state->options &= ~DPMAC_LINK_OPT_AUTONEG; if (!state->up) { @@ -464,9 +504,16 @@ static int ldpaa_get_dpmac_state(struct ldpaa_eth_priv *priv, return 0; } +#ifdef CONFIG_DM_ETH +static int ldpaa_eth_open(struct udevice *dev) +{ + struct eth_pdata *plat = dev_get_platdata(dev); + struct ldpaa_eth_priv *priv = dev_get_priv(dev); +#else static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd) { struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv; +#endif struct dpmac_link_state dpmac_link_state = { 0 }; #ifdef DEBUG struct dpni_link_state link_state; @@ -474,8 +521,13 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd) int err = 0; struct dpni_queue d_queue; +#ifdef CONFIG_DM_ETH + if (eth_is_active(dev)) + return 0; +#else if (net_dev->state == ETH_STATE_ACTIVE) return 0; +#endif if (get_mc_boot_status() != 0) { printf("ERROR (MC is not booted)\n"); @@ -515,8 +567,13 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd) if (err) goto err_dpni_bind; +#ifdef CONFIG_DM_ETH + err = dpni_add_mac_addr(dflt_mc_io, MC_CMD_NO_FLAGS, + dflt_dpni->dpni_handle, plat->enetaddr); +#else err = dpni_add_mac_addr(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni->dpni_handle, net_dev->enetaddr); +#endif if (err) { printf("dpni_add_mac_addr() failed\n"); return err; @@ -589,22 +646,34 @@ err_dpmac_setup: return err; } +#ifdef CONFIG_DM_ETH +static void ldpaa_eth_stop(struct udevice *dev) +{ + struct ldpaa_eth_priv *priv = dev_get_priv(dev); +#else static void ldpaa_eth_stop(struct eth_device *net_dev) { struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv; - int err = 0; -#ifdef CONFIG_PHYLIB - struct phy_device *phydev = NULL; - int phy_num; #endif + struct phy_device *phydev = NULL; + int err = 0; +#ifdef CONFIG_DM_ETH + if (!eth_is_active(dev)) + return; +#else if ((net_dev->state == ETH_STATE_PASSIVE) || (net_dev->state == ETH_STATE_INIT)) return; +#endif #ifdef DEBUG ldpaa_eth_get_dpni_counter(); +#ifdef CONFIG_DM_ETH + ldpaa_eth_get_dpmac_counter(dev); +#else ldpaa_eth_get_dpmac_counter(net_dev); +#endif #endif err = dprc_disconnect(dflt_mc_io, MC_CMD_NO_FLAGS, @@ -628,13 +697,9 @@ static void ldpaa_eth_stop(struct eth_device *net_dev) if (err < 0) printf("dpni_disable() failed\n"); -#ifdef CONFIG_PHYLIB - for (phy_num = 0; phy_num < WRIOP_MAX_PHY_NUM; phy_num++) { - phydev = wriop_get_phy_dev(priv->dpmac_id, phy_num); - if (phydev) - phy_shutdown(phydev); - } -#endif + phydev = ldpaa_get_phydev(priv); + if (phydev) + phy_shutdown(phydev); /* Free DPBP handle and reset. */ ldpaa_dpbp_free(); @@ -1027,6 +1092,107 @@ static int ldpaa_dpni_bind(struct ldpaa_eth_priv *priv) return 0; } +#ifdef CONFIG_DM_ETH +static int ldpaa_eth_probe(struct udevice *dev) +{ + struct ofnode_phandle_args phandle; + + /* Nothing to do if there is no "phy-handle" in the DTS node */ + if (dev_read_phandle_with_args(dev, "phy-handle", NULL, + 0, 0, &phandle)) { + return 0; + } + + init_phy(dev); + + return 0; +} + +static uint32_t ldpaa_eth_get_dpmac_id(struct udevice *dev) +{ + int port_node = dev_of_offset(dev); + + return fdtdec_get_uint(gd->fdt_blob, port_node, "reg", -1); +} + +static const char *ldpaa_eth_get_phy_mode_str(struct udevice *dev) +{ + int port_node = dev_of_offset(dev); + const char *phy_mode_str; + + phy_mode_str = fdt_getprop(gd->fdt_blob, port_node, + "phy-connection-type", NULL); + if (phy_mode_str) + return phy_mode_str; + + phy_mode_str = fdt_getprop(gd->fdt_blob, port_node, "phy-mode", NULL); + return phy_mode_str; +} + +static int ldpaa_eth_bind(struct udevice *dev) +{ + const char *phy_mode_str = NULL; + uint32_t dpmac_id; + char eth_name[16]; + int phy_mode = -1; + + phy_mode_str = ldpaa_eth_get_phy_mode_str(dev); + if (phy_mode_str) + phy_mode = phy_get_interface_by_name(phy_mode_str); + if (phy_mode == -1) { + dev_err(dev, "incorrect phy mode\n"); + return -EINVAL; + } + + dpmac_id = ldpaa_eth_get_dpmac_id(dev); + if (dpmac_id == -1) { + dev_err(dev, "missing reg field from the dpmac node\n"); + return -EINVAL; + } + + sprintf(eth_name, "DPMAC%d@%s", dpmac_id, phy_mode_str); + device_set_name(dev, eth_name); + + return 0; +} + +static int ldpaa_eth_ofdata_to_platdata(struct udevice *dev) +{ + struct ldpaa_eth_priv *priv = dev_get_priv(dev); + const char *phy_mode_str; + + priv->dpmac_id = ldpaa_eth_get_dpmac_id(dev); + phy_mode_str = ldpaa_eth_get_phy_mode_str(dev); + priv->phy_mode = phy_get_interface_by_name(phy_mode_str); + + return 0; +} + +static const struct eth_ops ldpaa_eth_ops = { + .start = ldpaa_eth_open, + .send = ldpaa_eth_tx, + .recv = ldpaa_eth_pull_dequeue_rx, + .stop = ldpaa_eth_stop, +}; + +static const struct udevice_id ldpaa_eth_of_ids[] = { + { .compatible = "fsl,qoriq-mc-dpmac" }, +}; + +U_BOOT_DRIVER(ldpaa_eth) = { + .name = "ldpaa_eth", + .id = UCLASS_ETH, + .of_match = ldpaa_eth_of_ids, + .ofdata_to_platdata = ldpaa_eth_ofdata_to_platdata, + .bind = ldpaa_eth_bind, + .probe = ldpaa_eth_probe, + .ops = &ldpaa_eth_ops, + .priv_auto_alloc_size = sizeof(struct ldpaa_eth_priv), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), +}; + +#else + static int ldpaa_eth_netdev_init(struct eth_device *net_dev, phy_interface_t enet_if) { @@ -1099,3 +1265,4 @@ err_netdev_init: return err; } +#endif diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.h b/drivers/net/ldpaa_eth/ldpaa_eth.h index 3f9154b5bbcd..e90513e56f9a 100644 --- a/drivers/net/ldpaa_eth/ldpaa_eth.h +++ b/drivers/net/ldpaa_eth/ldpaa_eth.h @@ -116,7 +116,13 @@ struct ldpaa_fas { LDPAA_ETH_FAS_TIDE) struct ldpaa_eth_priv { +#ifdef CONFIG_DM_ETH + struct phy_device *phy; + int phy_mode; + bool started; +#else struct eth_device *net_dev; +#endif uint32_t dpmac_id; uint16_t dpmac_handle; From patchwork Wed Mar 18 14:47:38 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243813 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:38 +0200 Subject: [PATCH v2 03/14] drivers: net: fsl-mc: add support for CONFIG_DM_ETH In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-4-ioana.ciornei@nxp.com> Make any adjustments necessary in order to support DPAA2 devices probed using CONFIG_DM_ETH. While at it, fixup some styling issues aroung the switch-case statement. Signed-off-by: Ioana Ciornei --- Changes in v2: - none drivers/net/fsl-mc/mc.c | 48 ++++++++++++++++++++++++++++++----------- 1 file changed, 36 insertions(+), 12 deletions(-) diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index 07bbcc9b2311..fee372968a38 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -174,9 +174,21 @@ enum mc_fixup_type { }; static int mc_fixup_mac_addr(void *blob, int nodeoffset, +#ifdef CONFIG_DM_ETH + const char *propname, struct udevice *eth_dev, +#else const char *propname, struct eth_device *eth_dev, +#endif enum mc_fixup_type type) { +#ifdef CONFIG_DM_ETH + struct eth_pdata *plat = dev_get_platdata(eth_dev); + unsigned char *enetaddr = plat->enetaddr; + int eth_index = eth_dev->seq; +#else + unsigned char *enetaddr = eth_dev->enetaddr; + int eth_index = eth_dev->index; +#endif int err = 0, len = 0, size, i; unsigned char env_enetaddr[ARP_HLEN]; unsigned int enetaddr_32[ARP_HLEN]; @@ -184,23 +196,22 @@ static int mc_fixup_mac_addr(void *blob, int nodeoffset, switch (type) { case MC_FIXUP_DPL: - /* DPL likes its addresses on 32 * ARP_HLEN bits */ - for (i = 0; i < ARP_HLEN; i++) - enetaddr_32[i] = cpu_to_fdt32(eth_dev->enetaddr[i]); - val = enetaddr_32; - len = sizeof(enetaddr_32); - break; - + /* DPL likes its addresses on 32 * ARP_HLEN bits */ + for (i = 0; i < ARP_HLEN; i++) + enetaddr_32[i] = cpu_to_fdt32(enetaddr[i]); + val = enetaddr_32; + len = sizeof(enetaddr_32); + break; case MC_FIXUP_DPC: - val = eth_dev->enetaddr; - len = ARP_HLEN; - break; + val = enetaddr; + len = ARP_HLEN; + break; } /* MAC address property present */ if (fdt_get_property(blob, nodeoffset, propname, NULL)) { /* u-boot MAC addr randomly assigned - leave the present one */ - if (!eth_env_get_enetaddr_by_index("eth", eth_dev->index, + if (!eth_env_get_enetaddr_by_index("eth", eth_index, env_enetaddr)) return err; } else { @@ -250,7 +261,11 @@ const char *dpl_get_connection_endpoint(void *blob, char *endpoint) } static int mc_fixup_dpl_mac_addr(void *blob, int dpmac_id, +#ifdef CONFIG_DM_ETH + struct udevice *eth_dev) +#else struct eth_device *eth_dev) +#endif { int objoff = fdt_path_offset(blob, "/objects"); int dpmacoff = -1, dpnioff = -1; @@ -334,7 +349,11 @@ void fdt_fsl_mc_fixup_iommu_map_entry(void *blob) } static int mc_fixup_dpc_mac_addr(void *blob, int dpmac_id, +#ifdef CONFIG_DM_ETH + struct udevice *eth_dev) +#else struct eth_device *eth_dev) +#endif { int nodeoffset = fdt_path_offset(blob, "/board_info/ports"), noff; int err = 0; @@ -377,8 +396,13 @@ static int mc_fixup_dpc_mac_addr(void *blob, int dpmac_id, static int mc_fixup_mac_addrs(void *blob, enum mc_fixup_type type) { int i, err = 0, ret = 0; - char ethname[ETH_NAME_LEN]; +#ifdef CONFIG_DM_ETH +#define ETH_NAME_LEN 20 + struct udevice *eth_dev; +#else struct eth_device *eth_dev; +#endif + char ethname[ETH_NAME_LEN]; for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) { /* port not enabled */ From patchwork Wed Mar 18 14:47:39 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243812 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:39 +0200 Subject: [PATCH v2 04/14] board: ls1088ardb: transition to DM_ETH In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-5-ioana.ciornei@nxp.com> In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei --- Changes in v2: - none board/freescale/ls1088a/eth_ls1088ardb.c | 2 ++ board/freescale/ls1088a/ls1088a.c | 5 +++++ 2 files changed, 7 insertions(+) diff --git a/board/freescale/ls1088a/eth_ls1088ardb.c b/board/freescale/ls1088a/eth_ls1088ardb.c index 01f56db0a1bf..f56ce7d9ae8e 100644 --- a/board/freescale/ls1088a/eth_ls1088ardb.c +++ b/board/freescale/ls1088a/eth_ls1088ardb.c @@ -18,6 +18,7 @@ #include #include +#ifndef CONFIG_DM_ETH int board_eth_init(bd_t *bis) { #if defined(CONFIG_FSL_MC_ENET) @@ -95,6 +96,7 @@ int board_eth_init(bd_t *bis) return pci_eth_init(bis); } +#endif #if defined(CONFIG_RESET_PHY_R) void reset_phy(void) diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c index 0bd397a0beb6..225e787c7577 100644 --- a/board/freescale/ls1088a/ls1088a.c +++ b/board/freescale/ls1088a/ls1088a.c @@ -801,6 +801,11 @@ int board_init(void) #ifdef CONFIG_FSL_LS_PPA ppa_init(); #endif + +#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH) + pci_init(); +#endif + return 0; } From patchwork Wed Mar 18 14:47:40 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243818 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:40 +0200 Subject: [PATCH v2 05/14] board: ls2088ardb: transition to DM_ETH In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-6-ioana.ciornei@nxp.com> In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei --- Changes in v2: - used the positive logic (ifdef CONFIG_DM_ETH instead of ifndef) board/freescale/ls2080ardb/eth_ls2080rdb.c | 7 +++++++ board/freescale/ls2080ardb/ls2080ardb.c | 4 ++++ 2 files changed, 11 insertions(+) diff --git a/board/freescale/ls2080ardb/eth_ls2080rdb.c b/board/freescale/ls2080ardb/eth_ls2080rdb.c index b0f276e8397c..f0f6ca53cb05 100644 --- a/board/freescale/ls2080ardb/eth_ls2080rdb.c +++ b/board/freescale/ls2080ardb/eth_ls2080rdb.c @@ -23,6 +23,7 @@ DECLARE_GLOBAL_DATA_PTR; int board_eth_init(bd_t *bis) { +#ifndef CONFIG_DM_ETH #if defined(CONFIG_FSL_MC_ENET) int i, interface; struct memac_mdio_info mdio_info; @@ -99,6 +100,7 @@ int board_eth_init(bd_t *bis) cpu_eth_init(bis); #endif /* CONFIG_FSL_MC_ENET */ +#endif /* !CONFIG_DM_ETH */ #ifdef CONFIG_PHY_AQUANTIA /* @@ -112,7 +114,12 @@ int board_eth_init(bd_t *bis) gd->jt->mdio_phydev_for_ethname = mdio_phydev_for_ethname; gd->jt->miiphy_set_current_dev = miiphy_set_current_dev; #endif + +#ifdef CONFIG_DM_ETH + return 0; +#else return pci_eth_init(bis); +#endif } #if defined(CONFIG_RESET_PHY_R) diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index 282aaf47fb88..5e2fc7cc9833 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -244,6 +244,10 @@ int board_init(void) sec_init(); #endif +#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH) + pci_init(); +#endif + return 0; } From patchwork Wed Mar 18 14:47:41 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243814 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:41 +0200 Subject: [PATCH v2 06/14] arm: dts: lx2160a: add external MDIO nodes In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-7-ioana.ciornei@nxp.com> Add the External MDIO device nodes found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei --- Changes in v2: - none arch/arm/dts/fsl-lx2160a.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi index 42ce4379eceb..15f18bc4a5f7 100644 --- a/arch/arm/dts/fsl-lx2160a.dtsi +++ b/arch/arm/dts/fsl-lx2160a.dtsi @@ -363,4 +363,24 @@ bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; }; + + /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */ + emdio1: mdio at 8b96000 { + compatible = "fsl,ls-mdio"; + reg = <0x0 0x8b96000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */ + emdio2: mdio at 8b97000 { + compatible = "fsl,ls-mdio"; + reg = <0x0 0x8b97000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; From patchwork Wed Mar 18 14:47:42 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243819 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:42 +0200 Subject: [PATCH v2 07/14] arm: dts: ls2088a: add external MDIO nodes In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-8-ioana.ciornei@nxp.com> Add the External MDIO1 device node found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei --- Changes in v2: - none arch/arm/dts/fsl-ls2080a.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi index 99ed33af95b4..7ff854caecd5 100644 --- a/arch/arm/dts/fsl-ls2080a.dtsi +++ b/arch/arm/dts/fsl-ls2080a.dtsi @@ -200,4 +200,19 @@ status = "disabled"; }; + emdio1: mdio at 8B96000 { + compatible = "fsl,ls-mdio"; + reg = <0x0 0x8B96000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + emdio2: mdio at 8B97000 { + compatible = "fsl,ls-mdio"; + reg = <0x0 0x8B97000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; From patchwork Wed Mar 18 14:47:43 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243821 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:43 +0200 Subject: [PATCH v2 08/14] arm: dts: ls1088a: add external MDIO nodes In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-9-ioana.ciornei@nxp.com> Add the External MDIO1 device node found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei --- Changes in v2: - none arch/arm/dts/fsl-ls1088a.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi index abc8b21a112e..314961685070 100644 --- a/arch/arm/dts/fsl-ls1088a.dtsi +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -197,4 +197,19 @@ method = "smc"; }; + emdio1: mdio at 8B96000 { + compatible = "fsl,ls-mdio"; + reg = <0x0 0x8B96000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + emdio2: mdio at 8B97000 { + compatible = "fsl,ls-mdio"; + reg = <0x0 0x8B97000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; From patchwork Wed Mar 18 14:47:44 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243824 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:44 +0200 Subject: [PATCH v2 09/14] arm: dts: lx2160ardb: add DPMAC and PHY nodes In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-10-ioana.ciornei@nxp.com> In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the EMDIO1 node and describe the 2 AR8035 RGMII PHYs and the 2 AQR107 PHYs. Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei --- Changes in v2: - none arch/arm/dts/fsl-lx2160a-rdb.dts | 52 ++++++++++++++++++++++++++++++++ arch/arm/dts/fsl-lx2160a.dtsi | 45 +++++++++++++++++++++++++++ 2 files changed, 97 insertions(+) diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts index e542c6992ab8..584744368394 100644 --- a/arch/arm/dts/fsl-lx2160a-rdb.dts +++ b/arch/arm/dts/fsl-lx2160a-rdb.dts @@ -21,6 +21,58 @@ }; }; +&dpmac3 { + status = "okay"; + phy-handle = <&aquantia_phy1>; + phy-connection-type = "usxgmii"; +}; + +&dpmac4 { + status = "okay"; + phy-handle = <&aquantia_phy2>; + phy-connection-type = "usxgmii"; +}; + +&dpmac17 { + status = "okay"; + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +}; + +&dpmac18 { + status = "okay"; + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; +}; + +&emdio1 { + status = "okay"; + rgmii_phy1: ethernet-phy at 1 { + /* AR8035 PHY - "compatible" property not strictly needed */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x1>; + /* Poll mode - no "interrupts" property defined */ + }; + rgmii_phy2: ethernet-phy at 2 { + /* AR8035 PHY - "compatible" property not strictly needed */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x2>; + /* Poll mode - no "interrupts" property defined */ + }; + aquantia_phy1: ethernet-phy at 4 { + /* AQR107 PHY - "compatible" property not strictly needed */ + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = ; + reg = <0x4>; + }; + aquantia_phy2: ethernet-phy at 5 { + /* AQR107 PHY - "compatible" property not strictly needed */ + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = ; + reg = <0x5>; + }; +}; + &esdhc0 { status = "okay"; }; diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi index 15f18bc4a5f7..17ecdc569b37 100644 --- a/arch/arm/dts/fsl-lx2160a.dtsi +++ b/arch/arm/dts/fsl-lx2160a.dtsi @@ -364,6 +364,51 @@ ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; }; + fsl_mc: fsl-mc at 80c000000 { + compatible = "fsl,qoriq-mc", "simple-mfd"; + reg = <0x00000008 0x0c000000 0 0x40>, + <0x00000000 0x08340000 0 0x40000>; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + dpmacs { + compatible = "simple-mfd"; + #address-cells = <1>; + #size-cells = <0>; + + dpmac3: dpmac at 3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x3>; + status = "disabled"; + }; + + dpmac4: dpmac at 4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + status = "disabled"; + }; + + dpmac17: dpmac at 11 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x11>; + status = "disabled"; + }; + + dpmac18: dpmac at 12 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x12>; + status = "disabled"; + }; + }; + }; + /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */ emdio1: mdio at 8b96000 { compatible = "fsl,ls-mdio"; From patchwork Wed Mar 18 14:47:45 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243820 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:45 +0200 Subject: [PATCH v2 10/14] arm: dts: ls2088ardb: add DPMAC and PHY nodes In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-11-ioana.ciornei@nxp.com> In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the external MDIO nodes and describe the PHYs (4 x AQR405 and 4 x CS4340). Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei --- Changes in v2: - none arch/arm/dts/fsl-ls2080a.dtsi | 75 +++++++++++++++++++++-- arch/arm/dts/fsl-ls2088a-rdb-qspi.dts | 88 +++++++++++++++++++++++++++ 2 files changed, 157 insertions(+), 6 deletions(-) diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi index 7ff854caecd5..fb5777e268e4 100644 --- a/arch/arm/dts/fsl-ls2080a.dtsi +++ b/arch/arm/dts/fsl-ls2080a.dtsi @@ -50,12 +50,6 @@ interrupts = <0 32 0x1>; /* edge triggered */ }; - fsl_mc: fsl-mc at 80c000000 { - compatible = "fsl,qoriq-mc"; - reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ - <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - }; - i2c0: i2c at 2000000 { status = "disabled"; compatible = "fsl,vf610-i2c"; @@ -200,6 +194,75 @@ status = "disabled"; }; + fsl_mc: fsl-mc at 80c000000 { + compatible = "fsl,qoriq-mc", "simple-mfd"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + dpmacs { + compatible = "simple-mfd"; + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac at 1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x1>; + status = "disabled"; + }; + + dpmac2: dpmac at 2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x2>; + status = "disabled"; + }; + + dpmac3: dpmac at 3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x3>; + status = "disabled"; + }; + + dpmac4: dpmac at 4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + status = "disabled"; + }; + + dpmac5: dpmac at 5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x5>; + status = "disabled"; + }; + + dpmac6: dpmac at 6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x6>; + status = "disabled"; + }; + + dpmac7: dpmac at 7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x7>; + status = "disabled"; + }; + + dpmac8: dpmac at 8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x8>; + status = "disabled"; + }; + }; + }; + emdio1: mdio at 8B96000 { compatible = "fsl,ls-mdio"; reg = <0x0 0x8B96000 0x0 0x1000>; diff --git a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts index 72b2177b70d9..16b9aeec966c 100644 --- a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts +++ b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts @@ -21,6 +21,94 @@ }; }; +&dpmac1 { + status = "okay"; + phy-handle = <&mdio1_phy1>; + phy-connection-type = "xfi"; +}; + +&dpmac2 { + status = "okay"; + phy-handle = <&mdio1_phy2>; + phy-connection-type = "xfi"; +}; + +&dpmac3 { + status = "okay"; + phy-handle = <&mdio1_phy3>; + phy-connection-type = "xfi"; +}; + +&dpmac4 { + status = "okay"; + phy-handle = <&mdio1_phy4>; + phy-connection-type = "xfi"; +}; + +&dpmac5 { + status = "okay"; + phy-handle = <&mdio2_phy1>; + phy-connection-type = "xfi"; +}; + +&dpmac6 { + status = "okay"; + phy-handle = <&mdio2_phy2>; + phy-connection-type = "xfi"; +}; + +&dpmac7 { + status = "okay"; + phy-handle = <&mdio2_phy3>; + phy-connection-type = "xfi"; +}; + +&dpmac8 { + status = "okay"; + phy-handle = <&mdio2_phy4>; + phy-connection-type = "xfi"; +}; + +&emdio1 { + status = "okay"; + + /* CS4340 PHYs */ + mdio1_phy1: emdio1_phy at 1 { + reg = <0x10>; + }; + mdio1_phy2: emdio1_phy at 2 { + reg = <0x11>; + }; + mdio1_phy3: emdio1_phy at 3 { + reg = <0x12>; + }; + mdio1_phy4: emdio1_phy at 4 { + reg = <0x13>; + }; +}; + +&emdio2 { + status = "okay"; + + /* AQR405 PHYs */ + mdio2_phy1: emdio2_phy at 1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + mdio2_phy2: emdio2_phy at 2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + mdio2_phy3: emdio2_phy at 3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + mdio2_phy4: emdio2_phy at 4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; +}; + &dspi { bus-num = <0>; status = "okay"; From patchwork Wed Mar 18 14:47:46 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243823 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:46 +0200 Subject: [PATCH v2 11/14] arm: dts: ls1088ardb: add DPMAC and PHY nodes In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-12-ioana.ciornei@nxp.com> In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the external MDIO nodes and describe the PHYs (8 x VSC8514, AQR105). Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei --- Changes in v2: - none arch/arm/dts/fsl-ls1088a-rdb.dts | 102 +++++++++++++++++++++++++++++++ arch/arm/dts/fsl-ls1088a.dtsi | 87 ++++++++++++++++++++++++-- 2 files changed, 183 insertions(+), 6 deletions(-) diff --git a/arch/arm/dts/fsl-ls1088a-rdb.dts b/arch/arm/dts/fsl-ls1088a-rdb.dts index 0fe351973dc5..46a5780547fe 100644 --- a/arch/arm/dts/fsl-ls1088a-rdb.dts +++ b/arch/arm/dts/fsl-ls1088a-rdb.dts @@ -17,6 +17,108 @@ }; }; +&dpmac1 { + status = "okay"; + phy-connection-type = "xgmii"; +}; + +&dpmac2 { + status = "okay"; + phy-handle = <&mdio2_phy1>; + phy-connection-type = "xgmii"; +}; + +&dpmac3 { + status = "okay"; + phy-handle = <&mdio1_phy5>; + phy-connection-type = "qsgmii"; +}; + +&dpmac4 { + status = "okay"; + phy-handle = <&mdio1_phy6>; + phy-connection-type = "qsgmii"; +}; + +&dpmac5 { + status = "okay"; + phy-handle = <&mdio1_phy7>; + phy-connection-type = "qsgmii"; +}; + +&dpmac6 { + status = "okay"; + phy-handle = <&mdio1_phy8>; + phy-connection-type = "qsgmii"; +}; + +&dpmac7 { + status = "okay"; + phy-handle = <&mdio1_phy1>; + phy-connection-type = "qsgmii"; +}; + +&dpmac8 { + status = "okay"; + phy-handle = <&mdio1_phy2>; + phy-connection-type = "qsgmii"; +}; + +&dpmac9 { + status = "okay"; + phy-handle = <&mdio1_phy3>; + phy-connection-type = "qsgmii"; +}; + +&dpmac10 { + status = "okay"; + phy-handle = <&mdio1_phy4>; + phy-connection-type = "qsgmii"; +}; + +&emdio1 { + status = "okay"; + + /* Freescale F104 PHY1 */ + mdio1_phy1: emdio1_phy at 1 { + reg = <0x1c>; + }; + mdio1_phy2: emdio1_phy at 2 { + reg = <0x1d>; + }; + mdio1_phy3: emdio1_phy at 3 { + reg = <0x1e>; + }; + mdio1_phy4: emdio1_phy at 4 { + reg = <0x1f>; + }; + + /* F104 PHY2 */ + mdio1_phy5: emdio1_phy at 5 { + reg = <0x0c>; + }; + mdio1_phy6: emdio1_phy at 6 { + reg = <0x0d>; + }; + mdio1_phy7: emdio1_phy at 7 { + reg = <0x0e>; + }; + mdio1_phy8: emdio1_phy at 8 { + reg = <0x0f>; + }; +}; + +&emdio2 { + status = "okay"; + + /* Aquantia AQR105 10G PHY */ + mdio2_phy1: emdio2_phy at 1 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 2 0x4>; + reg = <0x0>; + }; +}; + &i2c0 { status = "okay"; u-boot,dm-pre-reloc; diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi index 314961685070..133cacb93e39 100644 --- a/arch/arm/dts/fsl-ls1088a.dtsi +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -82,12 +82,6 @@ interrupts = <0 32 0x1>; /* edge triggered */ }; - fsl_mc: fsl-mc at 80c000000 { - compatible = "fsl,qoriq-mc"; - reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ - <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - }; - dspi: dspi at 2100000 { compatible = "fsl,vf610-dspi"; #address-cells = <1>; @@ -197,6 +191,87 @@ method = "smc"; }; + fsl_mc: fsl-mc at 80c000000 { + compatible = "fsl,qoriq-mc", "simple-mfd"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + dpmacs { + compatible = "simple-mfd"; + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac at 1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x1>; + status = "disabled"; + }; + + dpmac2: dpmac at 2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x2>; + status = "disabled"; + }; + + dpmac3: dpmac at 3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x3>; + status = "disabled"; + }; + + dpmac4: dpmac at 4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + status = "disabled"; + }; + + dpmac5: dpmac at 5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x5>; + status = "disabled"; + }; + + dpmac6: dpmac at 6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x6>; + status = "disabled"; + }; + + dpmac7: dpmac at 7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x7>; + status = "disabled"; + }; + + dpmac8: dpmac at 8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x8>; + status = "disabled"; + }; + + dpmac9: dpmac at 9 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x9>; + status = "disabled"; + }; + + dpmac10: dpmac at a { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xa>; + status = "disabled"; + }; + }; + }; + emdio1: mdio at 8B96000 { compatible = "fsl,ls-mdio"; reg = <0x0 0x8B96000 0x0 0x1000>; From patchwork Wed Mar 18 14:47:47 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243822 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:47 +0200 Subject: [PATCH v2 12/14] configs: ls1088ardb: enable CONFIG_DM_ETH and related In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-13-ioana.ciornei@nxp.com> Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS1088ARDB board. Signed-off-by: Ioana Ciornei --- Changes in v2: - none configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 5 +++++ configs/ls1088ardb_qspi_defconfig | 5 +++++ configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 5 +++++ configs/ls1088ardb_sdcard_qspi_defconfig | 5 +++++ configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 5 +++++ configs/ls1088ardb_tfa_defconfig | 5 +++++ include/configs/ls1088ardb.h | 2 ++ 7 files changed, 32 insertions(+) diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig index 3f654e2e1d0c..4d98b41ec11f 100644 --- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig @@ -21,6 +21,7 @@ CONFIG_MISC_INIT_R=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -40,8 +41,12 @@ CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig index 935d76b4bed9..94593984d902 100644 --- a/configs/ls1088ardb_qspi_defconfig +++ b/configs/ls1088ardb_qspi_defconfig @@ -22,6 +22,7 @@ CONFIG_MISC_INIT_R=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -43,8 +44,12 @@ CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig index 562cbdd3abd3..b2a61b76d96f 100644 --- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig @@ -33,6 +33,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -52,8 +53,12 @@ CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig index 1e6fdceca1e0..728611f6dd52 100644 --- a/configs/ls1088ardb_sdcard_qspi_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_defconfig @@ -32,6 +32,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -53,8 +54,12 @@ CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig index 0086039e5241..53641703cb6f 100644 --- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig @@ -24,6 +24,7 @@ CONFIG_MISC_INIT_R=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -47,8 +48,12 @@ CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig index a7908e95b5c0..211ae7717104 100644 --- a/configs/ls1088ardb_tfa_defconfig +++ b/configs/ls1088ardb_tfa_defconfig @@ -25,6 +25,7 @@ CONFIG_MISC_INIT_R=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -52,8 +53,12 @@ CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index b48efcc119f4..14648272016c 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -522,7 +522,9 @@ /* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET +#ifndef CONFIG_TARGET_LS1088ARDB #define CONFIG_PHYLIB +#endif #define CONFIG_PHY_VITESSE #define AQ_PHY_ADDR1 0x00 From patchwork Wed Mar 18 14:47:48 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243825 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:48 +0200 Subject: [PATCH v2 13/14] configs: ls2088ardb: enable CONFIG_DM_ETH and related In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-14-ioana.ciornei@nxp.com> Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS2088ARDB board. Signed-off-by: Ioana Ciornei --- Changes in v2: - none configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 4 ++++ configs/ls2088ardb_qspi_defconfig | 4 ++++ configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 4 ++++ configs/ls2088ardb_tfa_defconfig | 4 ++++ 4 files changed, 16 insertions(+) diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig index ae4a6820ff62..56e6c21163aa 100644 --- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig @@ -16,6 +16,7 @@ CONFIG_BOOTDELAY=10 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -39,8 +40,11 @@ CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_CORTINA=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig index 1ad5f3b367e6..5cba149821b0 100644 --- a/configs/ls2088ardb_qspi_defconfig +++ b/configs/ls2088ardb_qspi_defconfig @@ -19,6 +19,7 @@ CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -45,8 +46,11 @@ CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_CORTINA=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig index c0d0a99c8ad5..5a4edd88ae0d 100644 --- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig @@ -22,6 +22,7 @@ CONFIG_MISC_INIT_R=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -54,8 +55,11 @@ CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_CORTINA=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig index ccbaaf7a5c6e..670bb5299af9 100644 --- a/configs/ls2088ardb_tfa_defconfig +++ b/configs/ls2088ardb_tfa_defconfig @@ -23,6 +23,7 @@ CONFIG_MISC_INIT_R=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -62,8 +63,11 @@ CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_CORTINA=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y From patchwork Wed Mar 18 14:47:49 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 243826 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 18 Mar 2020 16:47:49 +0200 Subject: [PATCH v2 14/14] configs: lx2160ardb: enable CONFIG_DM_ETH and related In-Reply-To: <20200318144749.25509-1-ioana.ciornei@nxp.com> References: <20200318144749.25509-1-ioana.ciornei@nxp.com> Message-ID: <20200318144749.25509-15-ioana.ciornei@nxp.com> Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LX2160ARDB board. Signed-off-by: Ioana Ciornei --- Changes in v2: - none configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 4 ++++ configs/lx2160ardb_tfa_defconfig | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig index d1fffb399e99..2aee388e412f 100644 --- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig @@ -21,6 +21,7 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x2 CONFIG_MISC_INIT_R=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -48,7 +49,10 @@ CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_ATHEROS=y CONFIG_PHY_CORTINA=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y +CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig index 93f3e200c036..bcd1c594455b 100644 --- a/configs/lx2160ardb_tfa_defconfig +++ b/configs/lx2160ardb_tfa_defconfig @@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x2 CONFIG_MISC_INIT_R=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -52,7 +53,10 @@ CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_ATHEROS=y CONFIG_PHY_CORTINA=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y +CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y