diff mbox

[v2] net: phy: resume phydev when going to RESUMING

Message ID 1400132134-19490-1-git-send-email-zhangfei.gao@linaro.org
State Accepted
Headers show

Commit Message

Zhangfei Gao May 15, 2014, 5:35 a.m. UTC 
With commit be9dad1f9f26604fb ("net: phy: suspend phydev when going
to HALTED"), an unused PHY device will be put in a low-power mode
using BMCR_PDOWN. Some Ethernet drivers might be calling phy_start()
and phy_stop() from ndo_open and ndo_close() respectively, while
calling phy_connect() and phy_disconnect() from probe and remove.
In such a case, the PHY will be powered down during the phy_stop()
call, but will fail to be powered up in phy_start().
This patch fixes this scenario.

Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
 drivers/net/phy/phy.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

Comments

David Miller May 16, 2014, 7:18 p.m. UTC | #1 
From: Zhangfei Gao <zhangfei.gao@linaro.org>
Date: Thu, 15 May 2014 13:35:34 +0800

> With commit be9dad1f9f26604fb ("net: phy: suspend phydev when going
> to HALTED"), an unused PHY device will be put in a low-power mode
> using BMCR_PDOWN. Some Ethernet drivers might be calling phy_start()
> and phy_stop() from ndo_open and ndo_close() respectively, while
> calling phy_connect() and phy_disconnect() from probe and remove.
> In such a case, the PHY will be powered down during the phy_stop()
> call, but will fail to be powered up in phy_start().
> This patch fixes this scenario.
> 
> Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>

Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 1b6d09a..8bf6c3d 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -715,7 +715,7 @@  void phy_state_machine(struct work_struct *work)
 	struct delayed_work *dwork = to_delayed_work(work);
 	struct phy_device *phydev =
 			container_of(dwork, struct phy_device, state_queue);
-	int needs_aneg = 0, do_suspend = 0;
+	bool needs_aneg = false, do_suspend = false, do_resume = false;
 	int err = 0;
 
 	mutex_lock(&phydev->lock);
@@ -727,7 +727,7 @@  void phy_state_machine(struct work_struct *work)
 	case PHY_PENDING:
 		break;
 	case PHY_UP:
-		needs_aneg = 1;
+		needs_aneg = true;
 
 		phydev->link_timeout = PHY_AN_TIMEOUT;
 
@@ -757,7 +757,7 @@  void phy_state_machine(struct work_struct *work)
 			phydev->adjust_link(phydev->attached_dev);
 
 		} else if (0 == phydev->link_timeout--)
-			needs_aneg = 1;
+			needs_aneg = true;
 		break;
 	case PHY_NOLINK:
 		err = phy_read_status(phydev);
@@ -780,7 +780,7 @@  void phy_state_machine(struct work_struct *work)
 			netif_carrier_on(phydev->attached_dev);
 		} else {
 			if (0 == phydev->link_timeout--)
-				needs_aneg = 1;
+				needs_aneg = true;
 		}
 
 		phydev->adjust_link(phydev->attached_dev);
@@ -816,7 +816,7 @@  void phy_state_machine(struct work_struct *work)
 			phydev->link = 0;
 			netif_carrier_off(phydev->attached_dev);
 			phydev->adjust_link(phydev->attached_dev);
-			do_suspend = 1;
+			do_suspend = true;
 		}
 		break;
 	case PHY_RESUMING:
@@ -865,6 +865,7 @@  void phy_state_machine(struct work_struct *work)
 			}
 			phydev->adjust_link(phydev->attached_dev);
 		}
+		do_resume = true;
 		break;
 	}
 
@@ -872,9 +873,10 @@  void phy_state_machine(struct work_struct *work)
 
 	if (needs_aneg)
 		err = phy_start_aneg(phydev);
-
-	if (do_suspend)
+	else if (do_suspend)
 		phy_suspend(phydev);
+	else if (do_resume)
+		phy_resume(phydev);
 
 	if (err < 0)
 		phy_error(phydev);