| Message ID | 5375091D.3010607@ti.com |
|---|---|
| State | New |
| Headers | show |
On 05/16/2014 02:36 AM, Santosh Shilimkar wrote: >>> >> yes. >>> >> My board is panda ES. without this revert, it works. >> > >> > Care to specify what linux version you are testing against? >> > >> > Does it hang in idle always immediately on booting? >> > >> > Or does the serial console first hang with sysrq still >> > working (ctrl-a h in minicom for help) with device >> > eventually locking up hard? >> > > I just posted an updated patch Alex on other thread. > Attaching here again for your reference. Please try > it out and see if the you still get a hang. it does not hang this time. but I am not sure it can solve my problem, since RCU stall is not easy to reproduce in short time.
On Friday 16 May 2014 03:41 AM, Alex Shi wrote: > On 05/16/2014 02:36 AM, Santosh Shilimkar wrote: >>>>>> yes. >>>>>> My board is panda ES. without this revert, it works. >>>> >>>> Care to specify what linux version you are testing against? >>>> >>>> Does it hang in idle always immediately on booting? >>>> >>>> Or does the serial console first hang with sysrq still >>>> working (ctrl-a h in minicom for help) with device >>>> eventually locking up hard? >>>> >> I just posted an updated patch Alex on other thread. >> Attaching here again for your reference. Please try >> it out and see if the you still get a hang. > > it does not hang this time. > This is good news and exactly what I expected. > but I am not sure it can solve my problem, since RCU stall is not easy > to reproduce in short time. > You may want to run the system longer if you can. I suspect the RCU stall was also side effect of missing interrupts. Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 05/16/2014 09:37 PM, Santosh Shilimkar wrote: > On Friday 16 May 2014 03:41 AM, Alex Shi wrote: >> On 05/16/2014 02:36 AM, Santosh Shilimkar wrote: >>>>>>> yes. >>>>>>> My board is panda ES. without this revert, it works. >>>>> >>>>> Care to specify what linux version you are testing against? >>>>> >>>>> Does it hang in idle always immediately on booting? >>>>> >>>>> Or does the serial console first hang with sysrq still >>>>> working (ctrl-a h in minicom for help) with device >>>>> eventually locking up hard? >>>>> >>> I just posted an updated patch Alex on other thread. >>> Attaching here again for your reference. Please try >>> it out and see if the you still get a hang. >> >> it does not hang this time. >> > This is good news and exactly what I expected. > >> but I am not sure it can solve my problem, since RCU stall is not easy >> to reproduce in short time. >> > You may want to run the system longer if you can. I suspect the RCU stall > was also side effect of missing interrupts. Sure. it do remove the RCU stall on my panda board. > > Regards, > Santosh >
On Thursday 22 May 2014 04:59 AM, Alex Shi wrote: > On 05/16/2014 09:37 PM, Santosh Shilimkar wrote: >> On Friday 16 May 2014 03:41 AM, Alex Shi wrote: >>> On 05/16/2014 02:36 AM, Santosh Shilimkar wrote: >>>>>>>> yes. >>>>>>>> My board is panda ES. without this revert, it works. >>>>>> >>>>>> Care to specify what linux version you are testing against? >>>>>> >>>>>> Does it hang in idle always immediately on booting? >>>>>> >>>>>> Or does the serial console first hang with sysrq still >>>>>> working (ctrl-a h in minicom for help) with device >>>>>> eventually locking up hard? >>>>>> >>>> I just posted an updated patch Alex on other thread. >>>> Attaching here again for your reference. Please try >>>> it out and see if the you still get a hang. >>> >>> it does not hang this time. >>> >> This is good news and exactly what I expected. >> >>> but I am not sure it can solve my problem, since RCU stall is not easy >>> to reproduce in short time. >>> >> You may want to run the system longer if you can. I suspect the RCU stall >> was also side effect of missing interrupts. > > Sure. it do remove the RCU stall on my panda board. > Thanks for confirming. Tony already send fix upstream so it should show up in next rc mostly -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
From bb3b82cc5645b83bedf1343d03cc956f27f6fc83 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Mon, 12 May 2014 17:37:59 -0400
Subject: [PATCH] ARM: OMAP4: Fix the boot regression with CPU_IDLE enabled
On OMAP4 panda board, there have been several bug reports about boot
hang and lock-ups with CPU_IDLE enabled. The root cause of the issue
is missing interrupts while in idle state. Commit cb7094e8 {cpuidle / omap4 :
use CPUIDLE_FLAG_TIMER_STOP flag} moved the broadcast notifiers to common
code for right reasons but on OMAP4 which suffers from a nasty ROM code
bug with GIC, commit ff999b8a {ARM: OMAP4460: Workaround for ROM bug ..},
we loose interrupts which leads to issues like lock-up, hangs etc.
Patch reverts commit cb7094 {cpuidle / omap4 : use CPUIDLE_FLAG_TIMER_STOP
flag} and 54769d6 {cpuidle: OMAP4: remove timer broadcast initialization} to
avoid the issue. With this change, OMAP4 panda boards, the mentioned
issues are getting fixed. We no longer loose interrupts which was the cause
of the regression.
Cc: Roger Quadros <rogerq@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Reported-tested-by: Roger Quadros <rogerq@ti.com>
Reported-tested-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
arch/arm/mach-omap2/cpuidle44xx.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index 01fc710..2498ab0 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -14,6 +14,7 @@
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/export.h>
+#include <linux/clockchips.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
@@ -83,6 +84,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
{
struct idle_statedata *cx = state_ptr + index;
u32 mpuss_can_lose_context = 0;
+ int cpu_id = smp_processor_id();
/*
* CPU0 has to wait and stay ON until CPU1 is OFF state.
@@ -110,6 +112,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) &&
(cx->mpu_logic_state == PWRDM_POWER_OFF);
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
+
/*
* Call idle CPU PM enter notifier chain so that
* VFP and per CPU interrupt context is saved.
@@ -165,6 +169,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
if (dev->cpu == 0 && mpuss_can_lose_context)
cpu_cluster_pm_exit();
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
+
fail:
cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
cpu_done[dev->cpu] = false;
@@ -172,6 +178,16 @@ fail:
return index;
}
+/*
+ * For each cpu, setup the broadcast timer because local timers
+ * stops for the states above C1.
+ */
+static void omap_setup_broadcast_timer(void *arg)
+{
+ int cpu = smp_processor_id();
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
+}
+
static struct cpuidle_driver omap4_idle_driver = {
.name = "omap4_idle",
.owner = THIS_MODULE,
@@ -189,8 +205,7 @@ static struct cpuidle_driver omap4_idle_driver = {
/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
.exit_latency = 328 + 440,
.target_residency = 960,
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
.enter = omap_enter_idle_coupled,
.name = "C2",
.desc = "CPUx OFF, MPUSS CSWR",
@@ -199,8 +214,7 @@ static struct cpuidle_driver omap4_idle_driver = {
/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
.exit_latency = 460 + 518,
.target_residency = 1100,
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
.enter = omap_enter_idle_coupled,
.name = "C3",
.desc = "CPUx OFF, MPUSS OSWR",
@@ -231,5 +245,8 @@ int __init omap4_idle_init(void)
if (!cpu_clkdm[0] || !cpu_clkdm[1])
return -ENODEV;
+ /* Configure the broadcast timer on each cpu */
+ on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
+
return cpuidle_register(&omap4_idle_driver, cpu_online_mask);
}
--
1.7.9.5