| Message ID | 1401194667-14445-2-git-send-email-zhangfei.gao@linaro.org |
|---|---|
| State | Changes Requested |
| Headers | show |
On Tue, May 27, 2014 at 01:44:26PM +0100, Zhangfei Gao wrote: > Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> > --- > .../bindings/net/hisilicon-hix5hd2-gmac.txt | 36 ++++++++++++++++++++ > 1 file changed, 36 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt > > diff --git a/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt > new file mode 100644 > index 0000000..5fe3835 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt > @@ -0,0 +1,36 @@ > +Hisilicon hix5hd2 gmac controller Just to clarify, is the SoC name "hix5hd2", or is the 'x' a wildcard? > + > +Required properties: > +- compatible: should be "hisilicon,hix5hd2-gmac". > +- reg: specifies base physical address(s) and size of the device registers. > + The first region is the MAC register base and size. > + The second region is external interface control register. Single registers? Are these not part of a larger block? > +- interrupts: should contain the MAC interrupts How many, in which order? > +- #address-cells: must be <1>. > +- #size-cells: must be <0>. > +- phy-mode: see ethernet.txt [1]. > +- phy-handle: see ethernet.txt [1]. > +- mac-address: see ethernet.txt [1]. > +- clocks: clock phandle and specifier pair. Is this the only clock input to the gmac block? Is the clock input named in any documentation? Cheers, Mark. > + > +- PHY subnode: inherits from phy binding [2] > + > +[1] Documentation/devicetree/bindings/net/ethernet.txt > +[2] Documentation/devicetree/bindings/net/phy.txt > + > +Example: > + gmac0: ethernet@f9840000 { > + compatible = "hisilicon,hix5hd2-gmac"; > + reg = <0xf9840000 0x1000>,<0xf984300c 0x4>; > + interrupts = <0 71 4>; > + #address-cells = <1>; > + #size-cells = <0>; > + phy-mode = "mii"; > + phy-handle = <&phy2>; > + mac-address = [00 00 00 00 00 00]; > + clocks = <&clock HIX5HD2_MAC0_CLK>; > + > + phy2: ethernet-phy@2 { > + reg = <2>; > + }; > + }; > -- > 1.7.9.5 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dear Mark On 05/27/2014 09:34 PM, Mark Rutland wrote: > On Tue, May 27, 2014 at 01:44:26PM +0100, Zhangfei Gao wrote: >> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> >> --- >> .../bindings/net/hisilicon-hix5hd2-gmac.txt | 36 ++++++++++++++++++++ >> 1 file changed, 36 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt >> >> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt >> new file mode 100644 >> index 0000000..5fe3835 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt >> @@ -0,0 +1,36 @@ >> +Hisilicon hix5hd2 gmac controller > > Just to clarify, is the SoC name "hix5hd2", or is the 'x' a wildcard? "hix5hd2" is Soc name, which contains a series of similar chips. > >> + >> +Required properties: >> +- compatible: should be "hisilicon,hix5hd2-gmac". >> +- reg: specifies base physical address(s) and size of the device registers. >> + The first region is the MAC register base and size. >> + The second region is external interface control register. > > Single registers? Are these not part of a larger block? It is a single register, outside of the memory region. gmac0: reg = <0xf9840000 0x1000>,<0xf984300c 0x4>; gmac1: reg = <0xf9841000 0x1000>,<0xf9843010 0x4>; The register is controlling interface mode, duplex etc. In fact it is rather a bug fix to the silicon, when it is added with intension of not touching the original ip design. It may be moved to the memory region in the future silicon design. However, currently without such register, it can not work. > >> +- interrupts: should contain the MAC interrupts > > How many, in which order? There is only one interrrupt. How about: - interrupts: interrupt for the device > >> +- #address-cells: must be <1>. >> +- #size-cells: must be <0>. >> +- phy-mode: see ethernet.txt [1]. >> +- phy-handle: see ethernet.txt [1]. >> +- mac-address: see ethernet.txt [1]. >> +- clocks: clock phandle and specifier pair. > > Is this the only clock input to the gmac block? > > Is the clock input named in any documentation? We have abstract only ONE mac clock input, which is in other patch for drivers/clk/hisilicon/clk-hix5hd2.c The clock input name is in include/dt-bindings/clock/hix5hd2-clock.h, described in "Documentation/devicetree/bindings/clock/hix5hd2-clock.txt" How about: - clocks: a pointer to the reference clock for this device. Or should I mention hix5hd2-clock.h in this binding? > > Cheers, > Mark. > >> + >> +- PHY subnode: inherits from phy binding [2] >> + >> +[1] Documentation/devicetree/bindings/net/ethernet.txt >> +[2] Documentation/devicetree/bindings/net/phy.txt >> + >> +Example: >> + gmac0: ethernet@f9840000 { >> + compatible = "hisilicon,hix5hd2-gmac"; >> + reg = <0xf9840000 0x1000>,<0xf984300c 0x4>; >> + interrupts = <0 71 4>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + phy-mode = "mii"; >> + phy-handle = <&phy2>; >> + mac-address = [00 00 00 00 00 00]; >> + clocks = <&clock HIX5HD2_MAC0_CLK>; >> + >> + phy2: ethernet-phy@2 { >> + reg = <2>; >> + }; >> + }; >> -- >> 1.7.9.5 >> >> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, May 28, 2014 at 06:41:40AM +0100, zhangfei wrote: > Dear Mark > > On 05/27/2014 09:34 PM, Mark Rutland wrote: > > On Tue, May 27, 2014 at 01:44:26PM +0100, Zhangfei Gao wrote: > >> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> > >> --- > >> .../bindings/net/hisilicon-hix5hd2-gmac.txt | 36 ++++++++++++++++++++ > >> 1 file changed, 36 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt > >> > >> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt > >> new file mode 100644 > >> index 0000000..5fe3835 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt > >> @@ -0,0 +1,36 @@ > >> +Hisilicon hix5hd2 gmac controller > > > > Just to clarify, is the SoC name "hix5hd2", or is the 'x' a wildcard? > "hix5hd2" is Soc name, which contains a series of similar chips. How similar are they? It's preferable to have a precise name, even when used as a fallback for other similar devices. > > > >> + > >> +Required properties: > >> +- compatible: should be "hisilicon,hix5hd2-gmac". > >> +- reg: specifies base physical address(s) and size of the device registers. > >> + The first region is the MAC register base and size. > >> + The second region is external interface control register. > > > > Single registers? Are these not part of a larger block? > It is a single register, outside of the memory region. > gmac0: reg = <0xf9840000 0x1000>,<0xf984300c 0x4>; > gmac1: reg = <0xf9841000 0x1000>,<0xf9843010 0x4>; > > The register is controlling interface mode, duplex etc. > In fact it is rather a bug fix to the silicon, when it is added with > intension of not touching the original ip design. > > It may be moved to the memory region in the future silicon design. > However, currently without such register, it can not work. I see. Is it possible that a future revision might have this fixed, such that the second reg entry would become optional? > > > >> +- interrupts: should contain the MAC interrupts > > > > How many, in which order? > There is only one interrrupt. > How about: > - interrupts: interrupt for the device The original wording is OK, all you need to do is change the original wording to get rid of the trailing 's': - interrupts: should contain the MAC interrupt > > > > >> +- #address-cells: must be <1>. > >> +- #size-cells: must be <0>. > >> +- phy-mode: see ethernet.txt [1]. > >> +- phy-handle: see ethernet.txt [1]. > >> +- mac-address: see ethernet.txt [1]. > >> +- clocks: clock phandle and specifier pair. > > > > Is this the only clock input to the gmac block? > > > > Is the clock input named in any documentation? > > We have abstract only ONE mac clock input, which is in other patch for > drivers/clk/hisilicon/clk-hix5hd2.c > The clock input name is in include/dt-bindings/clock/hix5hd2-clock.h, > described in "Documentation/devicetree/bindings/clock/hix5hd2-clock.txt" If you have only one physical clock input in the GMAC block, that's fine. Is there a name for that input line from the POV of the GMAC block? > How about: > - clocks: a pointer to the reference clock for this device. I think the original wording is OK, I'd just like to be clear on what the HW looks like. > > Or should I mention hix5hd2-clock.h in this binding? No, that's part of the description of the clock provider. It shouldn't be mentioned here. Cheers, Mark. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 05/28/2014 08:53 PM, Mark Rutland wrote: > On Wed, May 28, 2014 at 06:41:40AM +0100, zhangfei wrote: >> Dear Mark >> >> On 05/27/2014 09:34 PM, Mark Rutland wrote: >>> On Tue, May 27, 2014 at 01:44:26PM +0100, Zhangfei Gao wrote: >>>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> >>>> --- >>>> .../bindings/net/hisilicon-hix5hd2-gmac.txt | 36 ++++++++++++++++++++ >>>> 1 file changed, 36 insertions(+) >>>> create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt >>>> >>>> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt >>>> new file mode 100644 >>>> index 0000000..5fe3835 >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt >>>> @@ -0,0 +1,36 @@ >>>> +Hisilicon hix5hd2 gmac controller >>> >>> Just to clarify, is the SoC name "hix5hd2", or is the 'x' a wildcard? >> "hix5hd2" is Soc name, which contains a series of similar chips. > > How similar are they? > > It's preferable to have a precise name, even when used as a fallback for > other similar devices. The soc name "hix5hd2" is provided by hisilicon. In fact, they have considered a lot and discussed long time for this name :) > >>> >>>> + >>>> +Required properties: >>>> +- compatible: should be "hisilicon,hix5hd2-gmac". >>>> +- reg: specifies base physical address(s) and size of the device registers. >>>> + The first region is the MAC register base and size. >>>> + The second region is external interface control register. >>> >>> Single registers? Are these not part of a larger block? >> It is a single register, outside of the memory region. >> gmac0: reg = <0xf9840000 0x1000>,<0xf984300c 0x4>; >> gmac1: reg = <0xf9841000 0x1000>,<0xf9843010 0x4>; >> >> The register is controlling interface mode, duplex etc. >> In fact it is rather a bug fix to the silicon, when it is added with >> intension of not touching the original ip design. >> >> It may be moved to the memory region in the future silicon design. >> However, currently without such register, it can not work. > > I see. Is it possible that a future revision might have this fixed, such > that the second reg entry would become optional? We have given this feedback to the silicon team, and they admit this should be fixed. However, not sure it can be fixed soon since the product pressure. Can we keep this first since it is required currently. > >>> >>>> +- interrupts: should contain the MAC interrupts >>> >>> How many, in which order? >> There is only one interrrupt. >> How about: >> - interrupts: interrupt for the device > > The original wording is OK, all you need to do is change the original > wording to get rid of the trailing 's': > > - interrupts: should contain the MAC interrupt OK, thanks > >> >>> >>>> +- #address-cells: must be <1>. >>>> +- #size-cells: must be <0>. >>>> +- phy-mode: see ethernet.txt [1]. >>>> +- phy-handle: see ethernet.txt [1]. >>>> +- mac-address: see ethernet.txt [1]. >>>> +- clocks: clock phandle and specifier pair. >>> >>> Is this the only clock input to the gmac block? >>> >>> Is the clock input named in any documentation? >> >> We have abstract only ONE mac clock input, which is in other patch for >> drivers/clk/hisilicon/clk-hix5hd2.c >> The clock input name is in include/dt-bindings/clock/hix5hd2-clock.h, >> described in "Documentation/devicetree/bindings/clock/hix5hd2-clock.txt" > > If you have only one physical clock input in the GMAC block, that's > fine. Is there a name for that input line from the POV of the GMAC > block? There is no name, and since it is only one clock, no name required. The clock is abstracted for simplicity, which also contains some specific reset requiement. > >> How about: >> - clocks: a pointer to the reference clock for this device. > > I think the original wording is OK, I'd just like to be clear on what > the HW looks like. OK, thanks. > >> >> Or should I mention hix5hd2-clock.h in this binding? > > No, that's part of the description of the clock provider. It shouldn't > be mentioned here. > > Cheers, > Mark. > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, May 28, 2014 at 02:25:32PM +0100, zhangfei wrote: > > > On 05/28/2014 08:53 PM, Mark Rutland wrote: > > On Wed, May 28, 2014 at 06:41:40AM +0100, zhangfei wrote: > >> Dear Mark > >> > >> On 05/27/2014 09:34 PM, Mark Rutland wrote: > >>> On Tue, May 27, 2014 at 01:44:26PM +0100, Zhangfei Gao wrote: > >>>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> > >>>> --- > >>>> .../bindings/net/hisilicon-hix5hd2-gmac.txt | 36 ++++++++++++++++++++ > >>>> 1 file changed, 36 insertions(+) > >>>> create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt > >>>> > >>>> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt > >>>> new file mode 100644 > >>>> index 0000000..5fe3835 > >>>> --- /dev/null > >>>> +++ b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt > >>>> @@ -0,0 +1,36 @@ > >>>> +Hisilicon hix5hd2 gmac controller > >>> > >>> Just to clarify, is the SoC name "hix5hd2", or is the 'x' a wildcard? > >> "hix5hd2" is Soc name, which contains a series of similar chips. > > > > How similar are they? > > > > It's preferable to have a precise name, even when used as a fallback for > > other similar devices. > > The soc name "hix5hd2" is provided by hisilicon. > In fact, they have considered a lot and discussed long time for this name :) Sure, I would not expect hisilicon to rebrand their SoC family due to my comments on a mailing list. w.r.t. naming in the kernel I could only find an unanswered query [1] from Olof Johansson earlier this month, and no rationale for the change. I tried searching online for "hix5hd2" and didn't find much other than a suggestion it's also known as "Hi3716cv200". I assume this means the Hi371 range in general, which covers a few variants on the hisilicon website [2]. The names there are far more specific than "hix5hd2". We've been bitten in the past when generic SoC family names are used in DT bindings without also having specific strings. It's usually better to choose a particular variant as the base, and have others claim compatibility with that (with additional more specific compatible strings). The key issue is how similar the SoC variants are. If they are identical w.r.t. this block and the blocks it is attached to, then the compatible string you propose is likely to be fine. However, subtle differences in integration across variants might cause issues for which we want targeted workarounds, or we might be able to make better use of particular variants based on information that we cannot probe from the HW. For that we need very specific compatible strings, and in general it is better to add those and not need them than to need them but not have them. > > > >>> > >>>> + > >>>> +Required properties: > >>>> +- compatible: should be "hisilicon,hix5hd2-gmac". > >>>> +- reg: specifies base physical address(s) and size of the device registers. > >>>> + The first region is the MAC register base and size. > >>>> + The second region is external interface control register. > >>> > >>> Single registers? Are these not part of a larger block? > >> It is a single register, outside of the memory region. > >> gmac0: reg = <0xf9840000 0x1000>,<0xf984300c 0x4>; > >> gmac1: reg = <0xf9841000 0x1000>,<0xf9843010 0x4>; > >> > >> The register is controlling interface mode, duplex etc. > >> In fact it is rather a bug fix to the silicon, when it is added with > >> intension of not touching the original ip design. > >> > >> It may be moved to the memory region in the future silicon design. > >> However, currently without such register, it can not work. > > > > I see. Is it possible that a future revision might have this fixed, such > > that the second reg entry would become optional? > > We have given this feedback to the silicon team, and they admit this > should be fixed. > However, not sure it can be fixed soon since the product pressure. > Can we keep this first since it is required currently. I'm not asking for its removal, I'm just trying to find out if in future we might need to support a DTB without the second entry. > > > > >>> > >>>> +- interrupts: should contain the MAC interrupts > >>> > >>> How many, in which order? > >> There is only one interrrupt. > >> How about: > >> - interrupts: interrupt for the device > > > > The original wording is OK, all you need to do is change the original > > wording to get rid of the trailing 's': > > > > - interrupts: should contain the MAC interrupt > OK, thanks > > > > >> > >>> > >>>> +- #address-cells: must be <1>. > >>>> +- #size-cells: must be <0>. > >>>> +- phy-mode: see ethernet.txt [1]. > >>>> +- phy-handle: see ethernet.txt [1]. > >>>> +- mac-address: see ethernet.txt [1]. > >>>> +- clocks: clock phandle and specifier pair. > >>> > >>> Is this the only clock input to the gmac block? > >>> > >>> Is the clock input named in any documentation? > >> > >> We have abstract only ONE mac clock input, which is in other patch for > >> drivers/clk/hisilicon/clk-hix5hd2.c > >> The clock input name is in include/dt-bindings/clock/hix5hd2-clock.h, > >> described in "Documentation/devicetree/bindings/clock/hix5hd2-clock.txt" > > > > If you have only one physical clock input in the GMAC block, that's > > fine. Is there a name for that input line from the POV of the GMAC > > block? > > There is no name, and since it is only one clock, no name required. Ok. That's fine then, assuming we don't expect variants with different clock input lines wired up. Cheers, Mark. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-May/255195.html [2] http://www.hisilicon.com/products/digital.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 05/28/2014 10:58 PM, Mark Rutland wrote: > On Wed, May 28, 2014 at 02:25:32PM +0100, zhangfei wrote: >> >> >> On 05/28/2014 08:53 PM, Mark Rutland wrote: >>> On Wed, May 28, 2014 at 06:41:40AM +0100, zhangfei wrote: >>>> Dear Mark >>>> >>>> On 05/27/2014 09:34 PM, Mark Rutland wrote: >>>>> On Tue, May 27, 2014 at 01:44:26PM +0100, Zhangfei Gao wrote: >>>>>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> >>>>>> --- >>>>>> .../bindings/net/hisilicon-hix5hd2-gmac.txt | 36 ++++++++++++++++++++ >>>>>> 1 file changed, 36 insertions(+) >>>>>> create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt >>>>>> >>>>>> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt >>>>>> new file mode 100644 >>>>>> index 0000000..5fe3835 >>>>>> --- /dev/null >>>>>> +++ b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt >>>>>> @@ -0,0 +1,36 @@ >>>>>> +Hisilicon hix5hd2 gmac controller >>>>> >>>>> Just to clarify, is the SoC name "hix5hd2", or is the 'x' a wildcard? >>>> "hix5hd2" is Soc name, which contains a series of similar chips. >>> >>> How similar are they? >>> >>> It's preferable to have a precise name, even when used as a fallback for >>> other similar devices. >> >> The soc name "hix5hd2" is provided by hisilicon. >> In fact, they have considered a lot and discussed long time for this name :) > > Sure, I would not expect hisilicon to rebrand their SoC family due to my > comments on a mailing list. > > w.r.t. naming in the kernel I could only find an unanswered query [1] > from Olof Johansson earlier this month, and no rationale for the change. > > I tried searching online for "hix5hd2" and didn't find much other than a > suggestion it's also known as "Hi3716cv200". I assume this means the > Hi371 range in general, which covers a few variants on the hisilicon > website [2]. The names there are far more specific than "hix5hd2". > > We've been bitten in the past when generic SoC family names are used in > DT bindings without also having specific strings. It's usually better to > choose a particular variant as the base, and have others claim > compatibility with that (with additional more specific compatible > strings). > > The key issue is how similar the SoC variants are. If they are identical > w.r.t. this block and the blocks it is attached to, then the compatible > string you propose is likely to be fine. However, subtle differences in > integration across variants might cause issues for which we want > targeted workarounds, or we might be able to make better use of > particular variants based on information that we cannot probe from the > HW. For that we need very specific compatible strings, and in general it > is better to add those and not need them than to need them but not have > them. Currently hix5hd2 is series of hi3716c v200, hi3719c v100, hi3718c v100. They are same soc, except minus pin assembles different. However, not all hi37x is in this series, for example hi3716c v100 is a different soc. In the future hi3719m, hi3718m may also plan to add to hix5hd2 series. The difference will be different cpu core number, different gpu core number. Also use different ethernet controller. >>>>>> + >>>>>> +Required properties: >>>>>> +- compatible: should be "hisilicon,hix5hd2-gmac". >>>>>> +- reg: specifies base physical address(s) and size of the device registers. >>>>>> + The first region is the MAC register base and size. >>>>>> + The second region is external interface control register. >>>>> >>>>> Single registers? Are these not part of a larger block? >>>> It is a single register, outside of the memory region. >>>> gmac0: reg = <0xf9840000 0x1000>,<0xf984300c 0x4>; >>>> gmac1: reg = <0xf9841000 0x1000>,<0xf9843010 0x4>; >>>> >>>> The register is controlling interface mode, duplex etc. >>>> In fact it is rather a bug fix to the silicon, when it is added with >>>> intension of not touching the original ip design. >>>> >>>> It may be moved to the memory region in the future silicon design. >>>> However, currently without such register, it can not work. >>> >>> I see. Is it possible that a future revision might have this fixed, such >>> that the second reg entry would become optional? >> >> We have given this feedback to the silicon team, and they admit this >> should be fixed. >> However, not sure it can be fixed soon since the product pressure. >> Can we keep this first since it is required currently. > > I'm not asking for its removal, I'm just trying to find out if in future > we might need to support a DTB without the second entry. > Double confirmed with silicon guy, the fix can not be added in this chip. As the product is stable now, and it is too expensive to make new version. Thanks -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt new file mode 100644 index 0000000..5fe3835 --- /dev/null +++ b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt @@ -0,0 +1,36 @@ +Hisilicon hix5hd2 gmac controller + +Required properties: +- compatible: should be "hisilicon,hix5hd2-gmac". +- reg: specifies base physical address(s) and size of the device registers. + The first region is the MAC register base and size. + The second region is external interface control register. +- interrupts: should contain the MAC interrupts +- #address-cells: must be <1>. +- #size-cells: must be <0>. +- phy-mode: see ethernet.txt [1]. +- phy-handle: see ethernet.txt [1]. +- mac-address: see ethernet.txt [1]. +- clocks: clock phandle and specifier pair. + +- PHY subnode: inherits from phy binding [2] + +[1] Documentation/devicetree/bindings/net/ethernet.txt +[2] Documentation/devicetree/bindings/net/phy.txt + +Example: + gmac0: ethernet@f9840000 { + compatible = "hisilicon,hix5hd2-gmac"; + reg = <0xf9840000 0x1000>,<0xf984300c 0x4>; + interrupts = <0 71 4>; + #address-cells = <1>; + #size-cells = <0>; + phy-mode = "mii"; + phy-handle = <&phy2>; + mac-address = [00 00 00 00 00 00]; + clocks = <&clock HIX5HD2_MAC0_CLK>; + + phy2: ethernet-phy@2 { + reg = <2>; + }; + };
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> --- .../bindings/net/hisilicon-hix5hd2-gmac.txt | 36 ++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt