| Message ID | 20140613085640.GA21018@arm.com |
|---|---|
| State | Accepted |
| Commit | a1d23d5c94256ffa0de510a3d59d6eff551d97ae |
| Headers | show |
On 6/13/14, Catalin Marinas <catalin.marinas@arm.com> wrote: > On Fri, Jun 13, 2014 at 08:12:08AM +0100, Denis Kirjanov wrote: >> On 6/12/14, Catalin Marinas <catalin.marinas@arm.com> wrote: >> > On Thu, Jun 12, 2014 at 01:00:57PM +0100, Denis Kirjanov wrote: >> >> On 6/12/14, Denis Kirjanov <kda@linux-powerpc.org> wrote: >> >> > On 6/12/14, Catalin Marinas <catalin.marinas@arm.com> wrote: >> >> >> On 11 Jun 2014, at 21:04, Denis Kirjanov <kda@linux-powerpc.org> >> >> >> wrote: >> >> >>> On 6/11/14, Catalin Marinas <catalin.marinas@arm.com> wrote: >> >> >>>> On Wed, Jun 11, 2014 at 04:13:07PM +0400, Denis Kirjanov wrote: >> >> >>>>> I got a trace while running 3.15.0-08556-gdfb9454: >> >> >>>>> >> >> >>>>> [ 104.534026] Unable to handle kernel paging request for data >> >> >>>>> at >> >> >>>>> address 0xc00000007f000000 >> >> >>>> >> >> >>>> Were there any kmemleak messages prior to this, like "kmemleak >> >> >>>> disabled"? There could be a race when kmemleak is disabled >> >> >>>> because >> >> >>>> of >> >> >>>> some fatal (for kmemleak) error while the scanning is taking >> >> >>>> place >> >> >>>> (which needs some more thinking to fix properly). >> >> >>> >> >> >>> No. I checked for the similar problem and didn't find anything >> >> >>> relevant. >> >> >>> I'll try to bisect it. >> >> >> >> >> >> Does this happen soon after boot? I guess it’s the first scan >> >> >> (scheduled at around 1min after boot). Something seems to be >> >> >> telling >> >> >> kmemleak that there is a valid memory block at 0xc00000007f000000. >> >> > >> >> > Yeah, it happens after a while with a booted system so that's the >> >> > first kmemleak scan. >> >> >> >> I've bisected to this commit: d4c54919ed86302094c0ca7d48a8cbd4ee753e92 >> >> "mm: add !pte_present() check on existing hugetlb_entry callbacks". >> >> Reverting the commit fixes the issue >> > >> > I can't figure how this causes the problem but I have more questions. >> > Is >> > 0xc00000007f000000 address always the same in all crashes? If yes, you >> > could comment out start_scan_thread() in kmemleak_late_init() to avoid >> > the scanning thread starting. Once booted, you can run: >> > >> > echo dump=0xc00000007f000000 > /sys/kernel/debug/kmemleak >> > >> > and check the dmesg for what kmemleak knows about that address, when it >> > was allocated and whether it should be mapped or not. >> >> The address is always the same. >> >> [ 179.466239] kmemleak: Object 0xc00000007f000000 (size 16777216): >> [ 179.466503] kmemleak: comm "swapper/0", pid 0, jiffies 4294892300 >> [ 179.466508] kmemleak: min_count = 0 >> [ 179.466512] kmemleak: count = 0 >> [ 179.466517] kmemleak: flags = 0x1 >> [ 179.466522] kmemleak: checksum = 0 >> [ 179.466526] kmemleak: backtrace: >> [ 179.466531] [<c000000000afc3dc>] >> .memblock_alloc_range_nid+0x68/0x88 >> [ 179.466544] [<c000000000afc444>] .memblock_alloc_base+0x20/0x58 >> [ 179.466553] [<c000000000ae96cc>] .alloc_dart_table+0x5c/0xb0 >> [ 179.466561] [<c000000000aea300>] .pmac_probe+0x38/0xa0 >> [ 179.466569] [<000000000002166c>] 0x2166c >> [ 179.466579] [<0000000000ae0e68>] 0xae0e68 >> [ 179.466587] [<0000000000009bc4>] 0x9bc4 > > OK, so that's the DART table allocated via alloc_dart_table(). Is > dart_tablebase removed from the kernel linear mapping after allocation? > If that's the case, we need to tell kmemleak to ignore this block (see > patch below, untested). But I still can't explain how commit > d4c54919ed863020 causes this issue. > > (also cc'ing the powerpc list and maintainers) Ok, your path fixes the oops. Ben, can you shed some light on this issue? Thanks! > ---------------8<-------------------------- > > From 09a7f1c97166c7bdca7ca4e8a4ff2774f3706ea3 Mon Sep 17 00:00:00 2001 > From: Catalin Marinas <catalin.marinas@arm.com> > Date: Fri, 13 Jun 2014 09:44:21 +0100 > Subject: [PATCH] powerpc/kmemleak: Do not scan the DART table > > The DART table allocation is registered to kmemleak via the > memblock_alloc_base() call. However, the DART table is later unmapped > and dart_tablebase VA no longer accessible. This patch tells kmemleak > not to scan this block and avoid an unhandled paging request. > > Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> > Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> > Cc: Paul Mackerras <paulus@samba.org> > --- > arch/powerpc/sysdev/dart_iommu.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/powerpc/sysdev/dart_iommu.c > b/arch/powerpc/sysdev/dart_iommu.c > index 62c47bb76517..9e5353ff6d1b 100644 > --- a/arch/powerpc/sysdev/dart_iommu.c > +++ b/arch/powerpc/sysdev/dart_iommu.c > @@ -476,6 +476,11 @@ void __init alloc_dart_table(void) > */ > dart_tablebase = (unsigned long) > __va(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L)); > + /* > + * The DART space is later unmapped from the kernel linear mapping and > + * accessing dart_tablebase during kmemleak scanning will fault. > + */ > + kmemleak_no_scan((void *)dart_tablebase); > > printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase); > } > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
On Fri, 2014-06-13 at 09:56 +0100, Catalin Marinas wrote: > OK, so that's the DART table allocated via alloc_dart_table(). Is > dart_tablebase removed from the kernel linear mapping after allocation? Yes. > If that's the case, we need to tell kmemleak to ignore this block (see > patch below, untested). But I still can't explain how commit > d4c54919ed863020 causes this issue. > > (also cc'ing the powerpc list and maintainers) We remove the DART from the linear mapping because it has to be mapped non-cachable and having it in the linear mapping would cause cache paradoxes. We also can't just change the caching attributes in the linear mapping because we use 16M pages for it and 970 CPUs don't support cache-inhibited 16M pages :-( And due to the MMU segmentation model, we also can't mix & match page sizes in that area. So we just unmap it, and ioremap it elsewhere. Cheers, Ben. > ---------------8<-------------------------- > > >From 09a7f1c97166c7bdca7ca4e8a4ff2774f3706ea3 Mon Sep 17 00:00:00 2001 > From: Catalin Marinas <catalin.marinas@arm.com> > Date: Fri, 13 Jun 2014 09:44:21 +0100 > Subject: [PATCH] powerpc/kmemleak: Do not scan the DART table > > The DART table allocation is registered to kmemleak via the > memblock_alloc_base() call. However, the DART table is later unmapped > and dart_tablebase VA no longer accessible. This patch tells kmemleak > not to scan this block and avoid an unhandled paging request. > > Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> > Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> > Cc: Paul Mackerras <paulus@samba.org> > --- > arch/powerpc/sysdev/dart_iommu.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c > index 62c47bb76517..9e5353ff6d1b 100644 > --- a/arch/powerpc/sysdev/dart_iommu.c > +++ b/arch/powerpc/sysdev/dart_iommu.c > @@ -476,6 +476,11 @@ void __init alloc_dart_table(void) > */ > dart_tablebase = (unsigned long) > __va(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L)); > + /* > + * The DART space is later unmapped from the kernel linear mapping and > + * accessing dart_tablebase during kmemleak scanning will fault. > + */ > + kmemleak_no_scan((void *)dart_tablebase); > > printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase); > } -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
On 13 Jun 2014, at 22:44, Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote: > On Fri, 2014-06-13 at 09:56 +0100, Catalin Marinas wrote: > >> OK, so that's the DART table allocated via alloc_dart_table(). Is >> dart_tablebase removed from the kernel linear mapping after allocation? > > Yes. > >> If that's the case, we need to tell kmemleak to ignore this block (see >> patch below, untested). But I still can't explain how commit >> d4c54919ed863020 causes this issue. >> >> (also cc'ing the powerpc list and maintainers) > > We remove the DART from the linear mapping because it has to be mapped > non-cachable and having it in the linear mapping would cause cache > paradoxes. We also can't just change the caching attributes in the > linear mapping because we use 16M pages for it and 970 CPUs don't > support cache-inhibited 16M pages :-( And due to the MMU segmentation > model, we also can't mix & match page sizes in that area. > > So we just unmap it, and ioremap it elsewhere. OK, thanks for the explanation. So the kmemleak annotation makes sense. Would you please take the I patch earlier (I guess with Denis’ tested- by). I can send it separately if more convenient. Thanks, Catalin-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
On Fri, 2014-06-13 at 14:26 +0400, Denis Kirjanov wrote: > On 6/13/14, Catalin Marinas <catalin.marinas@arm.com> wrote: > > On Fri, Jun 13, 2014 at 08:12:08AM +0100, Denis Kirjanov wrote: > >> On 6/12/14, Catalin Marinas <catalin.marinas@arm.com> wrote: > >> > On Thu, Jun 12, 2014 at 01:00:57PM +0100, Denis Kirjanov wrote: > >> >> On 6/12/14, Denis Kirjanov <kda@linux-powerpc.org> wrote: > >> >> > On 6/12/14, Catalin Marinas <catalin.marinas@arm.com> wrote: > >> >> >> On 11 Jun 2014, at 21:04, Denis Kirjanov <kda@linux-powerpc.org> > >> >> >> wrote: > >> >> >>> On 6/11/14, Catalin Marinas <catalin.marinas@arm.com> wrote: > >> >> >>>> On Wed, Jun 11, 2014 at 04:13:07PM +0400, Denis Kirjanov wrote: > >> >> >>>>> I got a trace while running 3.15.0-08556-gdfb9454: > >> >> >>>>> > >> >> >>>>> [ 104.534026] Unable to handle kernel paging request for data > >> >> >>>>> at > >> >> >>>>> address 0xc00000007f000000 > >> >> >>>> > >> >> >>>> Were there any kmemleak messages prior to this, like "kmemleak > >> >> >>>> disabled"? There could be a race when kmemleak is disabled > >> >> >>>> because > >> >> >>>> of > >> >> >>>> some fatal (for kmemleak) error while the scanning is taking > >> >> >>>> place > >> >> >>>> (which needs some more thinking to fix properly). > >> >> >>> > >> >> >>> No. I checked for the similar problem and didn't find anything > >> >> >>> relevant. > >> >> >>> I'll try to bisect it. > >> >> >> > >> >> >> Does this happen soon after boot? I guess it’s the first scan > >> >> >> (scheduled at around 1min after boot). Something seems to be > >> >> >> telling > >> >> >> kmemleak that there is a valid memory block at 0xc00000007f000000. > >> >> > > >> >> > Yeah, it happens after a while with a booted system so that's the > >> >> > first kmemleak scan. > >> >> > >> >> I've bisected to this commit: d4c54919ed86302094c0ca7d48a8cbd4ee753e92 > >> >> "mm: add !pte_present() check on existing hugetlb_entry callbacks". > >> >> Reverting the commit fixes the issue > >> > > >> > I can't figure how this causes the problem but I have more questions. > >> > Is > >> > 0xc00000007f000000 address always the same in all crashes? If yes, you > >> > could comment out start_scan_thread() in kmemleak_late_init() to avoid > >> > the scanning thread starting. Once booted, you can run: > >> > > >> > echo dump=0xc00000007f000000 > /sys/kernel/debug/kmemleak > >> > > >> > and check the dmesg for what kmemleak knows about that address, when it > >> > was allocated and whether it should be mapped or not. > >> > >> The address is always the same. > >> > >> [ 179.466239] kmemleak: Object 0xc00000007f000000 (size 16777216): > >> [ 179.466503] kmemleak: comm "swapper/0", pid 0, jiffies 4294892300 > >> [ 179.466508] kmemleak: min_count = 0 > >> [ 179.466512] kmemleak: count = 0 > >> [ 179.466517] kmemleak: flags = 0x1 > >> [ 179.466522] kmemleak: checksum = 0 > >> [ 179.466526] kmemleak: backtrace: > >> [ 179.466531] [<c000000000afc3dc>] > >> .memblock_alloc_range_nid+0x68/0x88 > >> [ 179.466544] [<c000000000afc444>] .memblock_alloc_base+0x20/0x58 > >> [ 179.466553] [<c000000000ae96cc>] .alloc_dart_table+0x5c/0xb0 > >> [ 179.466561] [<c000000000aea300>] .pmac_probe+0x38/0xa0 > >> [ 179.466569] [<000000000002166c>] 0x2166c > >> [ 179.466579] [<0000000000ae0e68>] 0xae0e68 > >> [ 179.466587] [<0000000000009bc4>] 0x9bc4 > > > > OK, so that's the DART table allocated via alloc_dart_table(). Is > > dart_tablebase removed from the kernel linear mapping after allocation? > > If that's the case, we need to tell kmemleak to ignore this block (see > > patch below, untested). But I still can't explain how commit > > d4c54919ed863020 causes this issue. > > > > (also cc'ing the powerpc list and maintainers) > > Ok, your path fixes the oops. > > Ben, can you shed some light on this issue? (I'm not Ben) Yes, the memory for dart_tablebase is removed from the linear mapping. In fact it's never mapped, see htab_initialize(). I don't easily see how commit d4c54919ed8, could have exposed this, but I don't know enough of the kmemleak internals to say for sure. cheers -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index 62c47bb76517..9e5353ff6d1b 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -476,6 +476,11 @@ void __init alloc_dart_table(void) */ dart_tablebase = (unsigned long) __va(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L)); + /* + * The DART space is later unmapped from the kernel linear mapping and + * accessing dart_tablebase during kmemleak scanning will fault. + */ + kmemleak_no_scan((void *)dart_tablebase); printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase); }