diff mbox

USB: S5P: Add ehci support

Message ID 1335862116-10391-1-git-send-email-rajeshwari.s@samsung.com
State New
Headers show

Commit Message

Rajeshwari Shinde May 1, 2012, 8:48 a.m. UTC
This patch adds ehci driver support  for s5p.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
---
 arch/arm/include/asm/arch-exynos/ehci-s5p.h |   66 ++++++++++++++++
 drivers/usb/host/Makefile                   |    1 +
 drivers/usb/host/ehci-s5p.c                 |  113 +++++++++++++++++++++++++++
 3 files changed, 180 insertions(+), 0 deletions(-)
 create mode 100755 arch/arm/include/asm/arch-exynos/ehci-s5p.h
 create mode 100644 drivers/usb/host/ehci-s5p.c

Comments

Marek Vasut May 1, 2012, 9:17 p.m. UTC | #1
Dear Rajeshwari Shinde,

> This patch adds ehci driver support  for s5p.

It'd be awesome if you CCed me ;-)
Also, it might be worth CCing Lukasz?

> 
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> ---
>  arch/arm/include/asm/arch-exynos/ehci-s5p.h |   66 ++++++++++++++++
>  drivers/usb/host/Makefile                   |    1 +
>  drivers/usb/host/ehci-s5p.c                 |  113
> +++++++++++++++++++++++++++ 3 files changed, 180 insertions(+), 0
> deletions(-)
>  create mode 100755 arch/arm/include/asm/arch-exynos/ehci-s5p.h
>  create mode 100644 drivers/usb/host/ehci-s5p.c
> 
> diff --git a/arch/arm/include/asm/arch-exynos/ehci-s5p.h
> b/arch/arm/include/asm/arch-exynos/ehci-s5p.h new file mode 100755
> index 0000000..68feb85
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-exynos/ehci-s5p.h
> @@ -0,0 +1,66 @@
> +/*
> + * SAMSUNG S5P USB HOST EHCI Controller
> + *
> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> + *	Vivek Gautam <gautam.vivek@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */
> +
> +#ifndef __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
> +#define __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
> +
> +#define CLK_24MHZ		5
> +
> +#define HOST_CTRL0_PHYSWRSTALL			(1 << 31)
> +#define HOST_CTRL0_COMMONON_N			(1 << 9)
> +#define HOST_CTRL0_SIDDQ			(1 << 6)
> +#define HOST_CTRL0_FORCESLEEP			(1 << 5)
> +#define HOST_CTRL0_FORCESUSPEND			(1 << 4)
> +#define HOST_CTRL0_WORDINTERFACE		(1 << 3)
> +#define HOST_CTRL0_UTMISWRST			(1 << 2)
> +#define HOST_CTRL0_LINKSWRST			(1 << 1)
> +#define HOST_CTRL0_PHYSWRST			(1 << 0)
> +
> +#define HOST_CTRL0_FSEL_MASK			(7 << 16)
> +
> +#define EHCICTRL_ENAINCRXALIGN			(1 << 29)
> +#define EHCICTRL_ENAINCR4			(1 << 28)
> +#define EHCICTRL_ENAINCR8			(1 << 27)
> +#define EHCICTRL_ENAINCR16			(1 << 26)
> +
> +/* Register map for PHY control */
> +struct s5p_usb_phy {
> +	unsigned int usbphyctrl0;
> +	unsigned int usbphytune0;
> +	unsigned int reserved1[2];
> +	unsigned int hsicphyctrl1;
> +	unsigned int hsicphytune1;
> +	unsigned int reserved2[2];
> +	unsigned int hsicphyctrl2;
> +	unsigned int hsicphytune2;
> +	unsigned int reserved3[2];
> +	unsigned int ehcictrl;
> +	unsigned int ohcictrl;
> +	unsigned int usbotgsys;
> +	unsigned int reserved4;
> +	unsigned int usbotgtune;
> +};
> +
> +/* Switch on the VBUS power. */
> +int board_usb_vbus_init(void);
> +
> +#endif /* __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__ */
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 0d4657e..59c3e57 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -50,6 +50,7 @@ COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
>  COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
>  COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
>  COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
> +COBJS-$(CONFIG_USB_EHCI_S5P) += ehci-s5p.o
>  COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
>  COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
> 
> diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
> new file mode 100644
> index 0000000..ac9f061
> --- /dev/null
> +++ b/drivers/usb/host/ehci-s5p.c
> @@ -0,0 +1,113 @@
> +/*
> + * SAMSUNG S5P USB HOST EHCI Controller
> + *
> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> + *	Vivek Gautam <gautam.vivek@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */
> +
> +#include <common.h>
> +#include <usb.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/ehci-s5p.h>
> +#include "ehci.h"
> +#include "ehci-core.h"
> +
> +/* Setup the EHCI host controller. */
> +static void setup_usb_phy(struct s5p_usb_phy *usb)
> +{
> +	unsigned int hostphy_ctrl0;
> +
> +	/* Setting up host and device simultaneously */
> +	hostphy_ctrl0 = readl(&usb->usbphyctrl0);
> +	hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK |
> +			   HOST_CTRL0_COMMONON_N |
> +			   /* HOST Phy setting */
> +			   HOST_CTRL0_PHYSWRST |
> +			   HOST_CTRL0_PHYSWRSTALL |
> +			   HOST_CTRL0_SIDDQ |
> +			   HOST_CTRL0_FORCESUSPEND |
> +			   HOST_CTRL0_FORCESLEEP);
> +	hostphy_ctrl0 |= (/* Setting up the ref freq */
> +			  CLK_24MHZ << 16 |

Parens around (CLK << 16).

> +			  /* HOST Phy setting */
> +			  HOST_CTRL0_LINKSWRST |
> +			  HOST_CTRL0_UTMISWRST);
> +	writel(hostphy_ctrl0, &usb->usbphyctrl0);

Use clrsetbits_le32() please.

> +	udelay(10);
> +	clrbits_le32(&usb->usbphyctrl0,
> +			HOST_CTRL0_LINKSWRST |
> +			HOST_CTRL0_UTMISWRST);
> +	udelay(20);
> +
> +	/* EHCI Ctrl setting */
> +	setbits_le32(&usb->ehcictrl,
> +			EHCICTRL_ENAINCRXALIGN |
> +			EHCICTRL_ENAINCR4 |
> +			EHCICTRL_ENAINCR8 |
> +			EHCICTRL_ENAINCR16);
> +}
> +
> +/* Reset the EHCI host controller. */
> +static void reset_usb_phy(struct s5p_usb_phy *usb)
> +{
> +	/* HOST_PHY reset */
> +	setbits_le32(&usb->usbphyctrl0,
> +			HOST_CTRL0_PHYSWRST |
> +			HOST_CTRL0_PHYSWRSTALL |
> +			HOST_CTRL0_SIDDQ |
> +			HOST_CTRL0_FORCESUSPEND |
> +			HOST_CTRL0_FORCESLEEP);
> +}
> +
> +/*
> + * EHCI-initialization
> + * Create the appropriate control structures to manage
> + * a new EHCI host controller.
> + */
> +int ehci_hcd_init(void)
> +{
> +	struct s5p_usb_phy *usb;
> +
> +	usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
> +	setup_usb_phy(usb);
> +
> +	hccr = (struct ehci_hccr *)(EXYNOS5_USB_HOST_EHCI_BASE);
> +	hcor = (struct ehci_hcor *)((uint32_t) hccr
> +				+ HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> +
> +	printf("\n usb cmd addr = %x", &hcor->or_usbcmd);

Either debug() or remove the above ;-)

> +	debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
> +		(uint32_t)hccr, (uint32_t)hcor,
> +		(uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> +
> +	return 0;
> +}
> +
> +/*
> + * Destroy the appropriate control structures corresponding
> + * the EHCI host controller.
> + */
> +int ehci_hcd_stop()
> +{
> +	struct s5p_usb_phy *usb;
> +
> +	usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
> +	reset_usb_phy(usb);

Well ... if reseting the PHY is enough to stop the controller, I won't object 
;-)

This patch gives a good impression, I see V2 and then mainline acceptance :)

> +
> +	return 0;
> +}
Rajeshwari Birje May 2, 2012, 11 a.m. UTC | #2
Hi Marek Vasut,

Thank you for the comments.

On Wed, May 2, 2012 at 10:00 AM, Marek Vasut<marex@denx.de> wrote:
> Dear Rajeshwari Shinde,
>
> This patch adds ehci driver support  for s5p.
>
>It'd be awesome if you CCed me ;-)
>Also, it might be worth CCing Lukasz?
-- Will do so.
>
>
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> ---
> arch/arm/include/asm/arch-exynos/ehci-s5p.h |   66 ++++++++++++++++
>  drivers/usb/host/Makefile                   |    1 +
>  drivers/usb/host/ehci-s5p.c                 |  113
> +++++++++++++++++++++++++++ 3 files changed, 180 insertions(+), 0
> deletions(-)
>  create mode 100755 arch/arm/include/asm/arch-exynos/ehci-s5p.h
>  create mode 100644 drivers/usb/host/ehci-s5p.c
>
> diff --git a/arch/arm/include/asm/arch-exynos/ehci-s5p.h
> b/arch/arm/include/asm/arch-exynos/ehci-s5p.h new file mode 100755
> index 0000000..68feb85
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-exynos/ehci-s5p.h
> @@ -0,0 +1,66 @@
> +/*
> + * SAMSUNG S5P USB HOST EHCI Controller
> + *
> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> + *   Vivek Gautam <gautam.vivek@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */
> +
> +#ifndef __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
> +#define __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
> +
> +#define CLK_24MHZ            5
> +
> +#define HOST_CTRL0_PHYSWRSTALL                       (1 << 31)
> +#define HOST_CTRL0_COMMONON_N                        (1 << 9)
> +#define HOST_CTRL0_SIDDQ                     (1 << 6)
> +#define HOST_CTRL0_FORCESLEEP                        (1 << 5)
> +#define HOST_CTRL0_FORCESUSPEND                      (1 << 4)
> +#define HOST_CTRL0_WORDINTERFACE             (1 << 3)
> +#define HOST_CTRL0_UTMISWRST                 (1 << 2)
> +#define HOST_CTRL0_LINKSWRST                 (1 << 1)
> +#define HOST_CTRL0_PHYSWRST                  (1 << 0)
> +
> +#define HOST_CTRL0_FSEL_MASK                 (7 << 16)
> +
> +#define EHCICTRL_ENAINCRXALIGN                       (1 << 29)
> +#define EHCICTRL_ENAINCR4                    (1 << 28)
> +#define EHCICTRL_ENAINCR8                    (1 << 27)
> +#define EHCICTRL_ENAINCR16                   (1 << 26)
> +
> +/* Register map for PHY control */
> +struct s5p_usb_phy {
> +     unsigned int usbphyctrl0;
> +     unsigned int usbphytune0;
> +     unsigned int reserved1[2];
> +     unsigned int hsicphyctrl1;
> +     unsigned int hsicphytune1;
> +     unsigned int reserved2[2];
> +     unsigned int hsicphyctrl2;
> +     unsigned int hsicphytune2;
> +     unsigned int reserved3[2];
> +     unsigned int ehcictrl;
> +     unsigned int ohcictrl;
> +     unsigned int usbotgsys;
> +     unsigned int reserved4;
> +     unsigned int usbotgtune;
> +};
> +
> +/* Switch on the VBUS power. */
> +int board_usb_vbus_init(void);
> +
> +#endif /* __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__ */
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 0d4657e..59c3e57 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -50,6 +50,7 @@ COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
>  COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
>  COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
>  COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
> +COBJS-$(CONFIG_USB_EHCI_S5P) += ehci-s5p.o
>  COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
>  COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
>
> diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
> new file mode 100644
> index 0000000..ac9f061
> --- /dev/null
> +++ b/drivers/usb/host/ehci-s5p.c
> @@ -0,0 +1,113 @@
> +/*
> + * SAMSUNG S5P USB HOST EHCI Controller
> + *
> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> + *   Vivek Gautam <gautam.vivek@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */
> +
> +#include <common.h>
> +#include <usb.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/ehci-s5p.h>
> +#include "ehci.h"
> +#include "ehci-core.h"
> +
> +/* Setup the EHCI host controller. */
> +static void setup_usb_phy(struct s5p_usb_phy *usb)
> +{
> +     unsigned int hostphy_ctrl0;
> +
> +     /* Setting up host and device simultaneously */
> +     hostphy_ctrl0 = readl(&usb->usbphyctrl0);
> +     hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK |
> +                        HOST_CTRL0_COMMONON_N |
> +                        /* HOST Phy setting */
> +                        HOST_CTRL0_PHYSWRST |
> +                        HOST_CTRL0_PHYSWRSTALL |
> +                        HOST_CTRL0_SIDDQ |
> +                        HOST_CTRL0_FORCESUSPEND |
> +                        HOST_CTRL0_FORCESLEEP);
> +     hostphy_ctrl0 |= (/* Setting up the ref freq */
> +                       CLK_24MHZ << 16 |
>
>Parens around (CLK << 16).
-- Corrected
>
> +                       /* HOST Phy setting */
> +                       HOST_CTRL0_LINKSWRST |
> +                       HOST_CTRL0_UTMISWRST);
> +     writel(hostphy_ctrl0, &usb->usbphyctrl0);
>
>Use clrsetbits_le32() please.
-- Corrected
> +     udelay(10);
> +     clrbits_le32(&usb->usbphyctrl0,
> +                     HOST_CTRL0_LINKSWRST |
> +                     HOST_CTRL0_UTMISWRST);
> +     udelay(20);
> +
> +     /* EHCI Ctrl setting */
> +     setbits_le32(&usb->ehcictrl,
> +                     EHCICTRL_ENAINCRXALIGN |
> +                     EHCICTRL_ENAINCR4 |
> +                     EHCICTRL_ENAINCR8 |
> +                     EHCICTRL_ENAINCR16);
> +}
> +
> +/* Reset the EHCI host controller. */
> +static void reset_usb_phy(struct s5p_usb_phy *usb)
> +{
> +     /* HOST_PHY reset */
> +     setbits_le32(&usb->usbphyctrl0,
> +                     HOST_CTRL0_PHYSWRST |
> +                     HOST_CTRL0_PHYSWRSTALL |
> +                     HOST_CTRL0_SIDDQ |
> +                     HOST_CTRL0_FORCESUSPEND |
> +                     HOST_CTRL0_FORCESLEEP);
> +}
> +
> +/*
> + * EHCI-initialization
> + * Create the appropriate control structures to manage
> + * a new EHCI host controller.
> + */
> +int ehci_hcd_init(void)
> +{
> +     struct s5p_usb_phy *usb;
> +
> +     usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
> +     setup_usb_phy(usb);
> +
> +     hccr = (struct ehci_hccr *)(EXYNOS5_USB_HOST_EHCI_BASE);
> +     hcor = (struct ehci_hcor *)((uint32_t) hccr
> +                             + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> +
> +     printf("\n usb cmd addr = %x", &hcor->or_usbcmd);
>
> Either debug() or remove the above ;-)
-- Removed
> +     debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
> +             (uint32_t)hccr, (uint32_t)hcor,
> +             (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> +
> +     return 0;
> +}
> +
> +/*
> + * Destroy the appropriate control structures corresponding
> + * the EHCI host controller.
> + */
> +int ehci_hcd_stop()
> +{
> +     struct s5p_usb_phy *usb;
> +
> +     usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
> +     reset_usb_phy(usb);
>
> Well ... if reseting the PHY is enough to stop the controller, I won't object
> ;-)
---- Verified the user manual and this seems to be enough to reset the
host controller
>
> This patch gives a good impression, I see V2 and then mainline acceptance :)
-- Thank you will submit V2.
> +
> +     return 0;
> +}
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

Regards,
Rajeshwari Shinde.
diff mbox

Patch

diff --git a/arch/arm/include/asm/arch-exynos/ehci-s5p.h b/arch/arm/include/asm/arch-exynos/ehci-s5p.h
new file mode 100755
index 0000000..68feb85
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/ehci-s5p.h
@@ -0,0 +1,66 @@ 
+/*
+ * SAMSUNG S5P USB HOST EHCI Controller
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *	Vivek Gautam <gautam.vivek@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
+#define __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
+
+#define CLK_24MHZ		5
+
+#define HOST_CTRL0_PHYSWRSTALL			(1 << 31)
+#define HOST_CTRL0_COMMONON_N			(1 << 9)
+#define HOST_CTRL0_SIDDQ			(1 << 6)
+#define HOST_CTRL0_FORCESLEEP			(1 << 5)
+#define HOST_CTRL0_FORCESUSPEND			(1 << 4)
+#define HOST_CTRL0_WORDINTERFACE		(1 << 3)
+#define HOST_CTRL0_UTMISWRST			(1 << 2)
+#define HOST_CTRL0_LINKSWRST			(1 << 1)
+#define HOST_CTRL0_PHYSWRST			(1 << 0)
+
+#define HOST_CTRL0_FSEL_MASK			(7 << 16)
+
+#define EHCICTRL_ENAINCRXALIGN			(1 << 29)
+#define EHCICTRL_ENAINCR4			(1 << 28)
+#define EHCICTRL_ENAINCR8			(1 << 27)
+#define EHCICTRL_ENAINCR16			(1 << 26)
+
+/* Register map for PHY control */
+struct s5p_usb_phy {
+	unsigned int usbphyctrl0;
+	unsigned int usbphytune0;
+	unsigned int reserved1[2];
+	unsigned int hsicphyctrl1;
+	unsigned int hsicphytune1;
+	unsigned int reserved2[2];
+	unsigned int hsicphyctrl2;
+	unsigned int hsicphytune2;
+	unsigned int reserved3[2];
+	unsigned int ehcictrl;
+	unsigned int ohcictrl;
+	unsigned int usbotgsys;
+	unsigned int reserved4;
+	unsigned int usbotgtune;
+};
+
+/* Switch on the VBUS power. */
+int board_usb_vbus_init(void);
+
+#endif /* __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__ */
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 0d4657e..59c3e57 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -50,6 +50,7 @@  COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
 COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
 COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
 COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
+COBJS-$(CONFIG_USB_EHCI_S5P) += ehci-s5p.o
 COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
 COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
new file mode 100644
index 0000000..ac9f061
--- /dev/null
+++ b/drivers/usb/host/ehci-s5p.c
@@ -0,0 +1,113 @@ 
+/*
+ * SAMSUNG S5P USB HOST EHCI Controller
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *	Vivek Gautam <gautam.vivek@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ehci-s5p.h>
+#include "ehci.h"
+#include "ehci-core.h"
+
+/* Setup the EHCI host controller. */
+static void setup_usb_phy(struct s5p_usb_phy *usb)
+{
+	unsigned int hostphy_ctrl0;
+
+	/* Setting up host and device simultaneously */
+	hostphy_ctrl0 = readl(&usb->usbphyctrl0);
+	hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK |
+			   HOST_CTRL0_COMMONON_N |
+			   /* HOST Phy setting */
+			   HOST_CTRL0_PHYSWRST |
+			   HOST_CTRL0_PHYSWRSTALL |
+			   HOST_CTRL0_SIDDQ |
+			   HOST_CTRL0_FORCESUSPEND |
+			   HOST_CTRL0_FORCESLEEP);
+	hostphy_ctrl0 |= (/* Setting up the ref freq */
+			  CLK_24MHZ << 16 |
+			  /* HOST Phy setting */
+			  HOST_CTRL0_LINKSWRST |
+			  HOST_CTRL0_UTMISWRST);
+	writel(hostphy_ctrl0, &usb->usbphyctrl0);
+	udelay(10);
+	clrbits_le32(&usb->usbphyctrl0,
+			HOST_CTRL0_LINKSWRST |
+			HOST_CTRL0_UTMISWRST);
+	udelay(20);
+
+	/* EHCI Ctrl setting */
+	setbits_le32(&usb->ehcictrl,
+			EHCICTRL_ENAINCRXALIGN |
+			EHCICTRL_ENAINCR4 |
+			EHCICTRL_ENAINCR8 |
+			EHCICTRL_ENAINCR16);
+}
+
+/* Reset the EHCI host controller. */
+static void reset_usb_phy(struct s5p_usb_phy *usb)
+{
+	/* HOST_PHY reset */
+	setbits_le32(&usb->usbphyctrl0,
+			HOST_CTRL0_PHYSWRST |
+			HOST_CTRL0_PHYSWRSTALL |
+			HOST_CTRL0_SIDDQ |
+			HOST_CTRL0_FORCESUSPEND |
+			HOST_CTRL0_FORCESLEEP);
+}
+
+/*
+ * EHCI-initialization
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(void)
+{
+	struct s5p_usb_phy *usb;
+
+	usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
+	setup_usb_phy(usb);
+
+	hccr = (struct ehci_hccr *)(EXYNOS5_USB_HOST_EHCI_BASE);
+	hcor = (struct ehci_hcor *)((uint32_t) hccr
+				+ HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+	printf("\n usb cmd addr = %x", &hcor->or_usbcmd);
+	debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
+		(uint32_t)hccr, (uint32_t)hcor,
+		(uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+	return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the EHCI host controller.
+ */
+int ehci_hcd_stop()
+{
+	struct s5p_usb_phy *usb;
+
+	usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
+	reset_usb_phy(usb);
+
+	return 0;
+}