diff mbox

ARM: STi: DT: STiH41x: Convert all uppercase non-defines to lowercase

Message ID 1401195188-23677-1-git-send-email-lee.jones@linaro.org
State Accepted
Commit dc62bfdfa3a5cc72d258d0856ac11b624bf5329d
Headers show

Commit Message

Lee Jones May 27, 2014, 12:53 p.m. UTC 
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stih415-pinctrl.dtsi   | 340 +++++++++++++++---------------
 arch/arm/boot/dts/stih416-b2020-revE.dts |   6 +-
 arch/arm/boot/dts/stih416-pinctrl.dtsi   | 342 +++++++++++++++----------------
 arch/arm/boot/dts/stih41x-b2000.dtsi     |   6 +-
 arch/arm/boot/dts/stih41x-b2020.dtsi     |   6 +-
 5 files changed, 350 insertions(+), 350 deletions(-)

Comments

Olof Johansson May 27, 2014, 6:01 p.m. UTC | #1 
On Tue, May 27, 2014 at 01:53:08PM +0100, Lee Jones wrote:
> Suggested-by: Olof Johansson <olof@lixom.net>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  arch/arm/boot/dts/stih415-pinctrl.dtsi   | 340 +++++++++++++++---------------
>  arch/arm/boot/dts/stih416-b2020-revE.dts |   6 +-
>  arch/arm/boot/dts/stih416-pinctrl.dtsi   | 342 +++++++++++++++----------------
>  arch/arm/boot/dts/stih41x-b2000.dtsi     |   6 +-
>  arch/arm/boot/dts/stih41x-b2020.dtsi     |   6 +-
>  5 files changed, 350 insertions(+), 350 deletions(-)

Acked-by: Olof Johansson <olof@lixom.net>


-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
Lee Jones June 25, 2014, 2:53 p.m. UTC | #2 
> Suggested-by: Olof Johansson <olof@lixom.net>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  arch/arm/boot/dts/stih415-pinctrl.dtsi   | 340 +++++++++++++++---------------
>  arch/arm/boot/dts/stih416-b2020-revE.dts |   6 +-
>  arch/arm/boot/dts/stih416-pinctrl.dtsi   | 342 +++++++++++++++----------------
>  arch/arm/boot/dts/stih41x-b2000.dtsi     |   6 +-
>  arch/arm/boot/dts/stih41x-b2020.dtsi     |   6 +-
>  5 files changed, 350 insertions(+), 350 deletions(-)

What happened to this Maxime?

It was Acked by Olof, then died.  Did it slip through the net?

> diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
> index caeac7e..1e0255d 100644
> --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
> @@ -11,33 +11,33 @@
>  / {
>  
>  	aliases {
> -		gpio0	= &PIO0;
> -		gpio1	= &PIO1;
> -		gpio2	= &PIO2;
> -		gpio3	= &PIO3;
> -		gpio4	= &PIO4;
> -		gpio5	= &PIO5;
> -		gpio6	= &PIO6;
> -		gpio7	= &PIO7;
> -		gpio8	= &PIO8;
> -		gpio9	= &PIO9;
> -		gpio10	= &PIO10;
> -		gpio11	= &PIO11;
> -		gpio12	= &PIO12;
> -		gpio13	= &PIO13;
> -		gpio14	= &PIO14;
> -		gpio15	= &PIO15;
> -		gpio16	= &PIO16;
> -		gpio17	= &PIO17;
> -		gpio18	= &PIO18;
> -		gpio19	= &PIO100;
> -		gpio20	= &PIO101;
> -		gpio21	= &PIO102;
> -		gpio22	= &PIO103;
> -		gpio23	= &PIO104;
> -		gpio24	= &PIO105;
> -		gpio25	= &PIO106;
> -		gpio26	= &PIO107;
> +		gpio0	= &pio0;
> +		gpio1	= &pio1;
> +		gpio2	= &pio2;
> +		gpio3	= &pio3;
> +		gpio4	= &pio4;
> +		gpio5	= &pio5;
> +		gpio6	= &pio6;
> +		gpio7	= &pio7;
> +		gpio8	= &pio8;
> +		gpio9	= &pio9;
> +		gpio10	= &pio10;
> +		gpio11	= &pio11;
> +		gpio12	= &pio12;
> +		gpio13	= &pio13;
> +		gpio14	= &pio14;
> +		gpio15	= &pio15;
> +		gpio16	= &pio16;
> +		gpio17	= &pio17;
> +		gpio18	= &pio18;
> +		gpio19	= &pio100;
> +		gpio20	= &pio101;
> +		gpio21	= &pio102;
> +		gpio22	= &pio103;
> +		gpio23	= &pio104;
> +		gpio24	= &pio105;
> +		gpio25	= &pio106;
> +		gpio26	= &pio107;
>  	};
>  
>  	soc {
> @@ -52,7 +52,7 @@
>  			interrupts-names = "irqmux";
>  			ranges 		= <0 0xfe610000 0x5000>;
>  
> -			PIO0: gpio@fe610000 {
> +			pio0: gpio@fe610000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -60,7 +60,7 @@
>  				reg		= <0 0x100>;
>  				st,bank-name	= "PIO0";
>  			};
> -			PIO1: gpio@fe611000 {
> +			pio1: gpio@fe611000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -68,7 +68,7 @@
>  				reg		= <0x1000 0x100>;
>  				st,bank-name	= "PIO1";
>  			};
> -			PIO2: gpio@fe612000 {
> +			pio2: gpio@fe612000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -76,7 +76,7 @@
>  				reg		= <0x2000 0x100>;
>  				st,bank-name	= "PIO2";
>  			};
> -			PIO3: gpio@fe613000 {
> +			pio3: gpio@fe613000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -84,7 +84,7 @@
>  				reg		= <0x3000 0x100>;
>  				st,bank-name	= "PIO3";
>  			};
> -			PIO4: gpio@fe614000 {
> +			pio4: gpio@fe614000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -96,8 +96,8 @@
>  			sbc_serial1 {
>  				pinctrl_sbc_serial1:sbc_serial1 {
>  					st,pins {
> -						tx	= <&PIO2 6 ALT3 OUT>;
> -						rx	= <&PIO2 7 ALT3 IN>;
> +						tx	= <&pio2 6 ALT3 OUT>;
> +						rx	= <&pio2 7 ALT3 IN>;
>  					};
>  				};
>  			};
> @@ -105,15 +105,15 @@
>  			keyscan {
>  				pinctrl_keyscan: keyscan {
>  					st,pins {
> -						keyin0 = <&PIO0 2 ALT2 IN>;
> -						keyin1 = <&PIO0 3 ALT2 IN>;
> -						keyin2 = <&PIO0 4 ALT2 IN>;
> -						keyin3 = <&PIO2 6 ALT2 IN>;
> -
> -						keyout0 = <&PIO1 6 ALT2 OUT>;
> -						keyout1 = <&PIO1 7 ALT2 OUT>;
> -						keyout2 = <&PIO0 6 ALT2 OUT>;
> -						keyout3 = <&PIO2 7 ALT2 OUT>;
> +						keyin0 = <&pio0 2 ALT2 IN>;
> +						keyin1 = <&pio0 3 ALT2 IN>;
> +						keyin2 = <&pio0 4 ALT2 IN>;
> +						keyin3 = <&pio2 6 ALT2 IN>;
> +
> +						keyout0 = <&pio1 6 ALT2 OUT>;
> +						keyout1 = <&pio1 7 ALT2 OUT>;
> +						keyout2 = <&pio0 6 ALT2 OUT>;
> +						keyout3 = <&pio2 7 ALT2 OUT>;
>  					};
>  				};
>  			};
> @@ -121,8 +121,8 @@
>  			sbc_i2c0 {
>  				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
>  					st,pins {
> -						sda = <&PIO4 6 ALT1 BIDIR>;
> -						scl = <&PIO4 5 ALT1 BIDIR>;
> +						sda = <&pio4 6 ALT1 BIDIR>;
> +						scl = <&pio4 5 ALT1 BIDIR>;
>  					};
>  				};
>  			};
> @@ -130,8 +130,8 @@
>  			sbc_i2c1 {
>  				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
>  					st,pins {
> -						sda = <&PIO3 2 ALT2 BIDIR>;
> -						scl = <&PIO3 1 ALT2 BIDIR>;
> +						sda = <&pio3 2 ALT2 BIDIR>;
> +						scl = <&pio3 1 ALT2 BIDIR>;
>  					};
>  				};
>  			};
> @@ -139,7 +139,7 @@
>  			rc{
>  				pinctrl_ir: ir0 {
>  					st,pins {
> -						ir = <&PIO4 0 ALT2 IN>;
> +						ir = <&pio4 0 ALT2 IN>;
>  					};
>  				};
>  			};
> @@ -147,49 +147,49 @@
>  			gmac1 {
>  				pinctrl_mii1: mii1 {
>  						st,pins {
> -						 txd0   = <&PIO0 0 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
> -						 txd1   = <&PIO0 1 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
> -						 txd2   = <&PIO0 2 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
> -						 txd3   = <&PIO0 3 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
> -						 txer   = <&PIO0 4 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
> -						 txen   = <&PIO0 5 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
> -						 txclk  = <&PIO0 6 ALT1 IN   NICLK	0	CLK_A>;
> -						 col    = <&PIO0 7 ALT1 IN   BYPASS	1000>;
> -						 mdio   = <&PIO1 0 ALT1 OUT  BYPASS	0>;
> -						 mdc    = <&PIO1 1 ALT1 OUT  NICLK	0	CLK_A>;
> -						 crs    = <&PIO1 2 ALT1 IN   BYPASS	1000>;
> -						 mdint  = <&PIO1 3 ALT1 IN   BYPASS	0>;
> -						 rxd0   = <&PIO1 4 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
> -						 rxd1   = <&PIO1 5 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
> -						 rxd2   = <&PIO1 6 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
> -						 rxd3   = <&PIO1 7 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
> -						 rxdv   = <&PIO2 0 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
> -						 rx_er  = <&PIO2 1 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
> -						 rxclk  = <&PIO2 2 ALT1 IN   NICLK	0	CLK_A>;
> -						 phyclk = <&PIO2 3 ALT1 IN   NICLK	1000	CLK_A>;
> +						 txd0   = <&pio0 0 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
> +						 txd1   = <&pio0 1 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
> +						 txd2   = <&pio0 2 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
> +						 txd3   = <&pio0 3 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
> +						 txer   = <&pio0 4 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
> +						 txen   = <&pio0 5 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
> +						 txclk  = <&pio0 6 ALT1 IN   NICLK	0	CLK_A>;
> +						 col    = <&pio0 7 ALT1 IN   BYPASS	1000>;
> +						 mdio   = <&pio1 0 ALT1 OUT  BYPASS	0>;
> +						 mdc    = <&pio1 1 ALT1 OUT  NICLK	0	CLK_A>;
> +						 crs    = <&pio1 2 ALT1 IN   BYPASS	1000>;
> +						 mdint  = <&pio1 3 ALT1 IN   BYPASS	0>;
> +						 rxd0   = <&pio1 4 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
> +						 rxd1   = <&pio1 5 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
> +						 rxd2   = <&pio1 6 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
> +						 rxd3   = <&pio1 7 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
> +						 rxdv   = <&pio2 0 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
> +						 rx_er  = <&pio2 1 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
> +						 rxclk  = <&pio2 2 ALT1 IN   NICLK	0	CLK_A>;
> +						 phyclk = <&pio2 3 ALT1 IN   NICLK	1000	CLK_A>;
>  					};
>  				};
>  
>  				pinctrl_rgmii1: rgmii1-0 {
>  					st,pins {
> -						 txd0 =	 <&PIO0 0 ALT1 OUT DE_IO	1000	CLK_A>;
> -						 txd1 =	 <&PIO0 1 ALT1 OUT DE_IO	1000	CLK_A>;
> -						 txd2 =	 <&PIO0 2 ALT1 OUT DE_IO	1000	CLK_A>;
> -						 txd3 =	 <&PIO0 3 ALT1 OUT DE_IO	1000	CLK_A>;
> -						 txen =	 <&PIO0 5 ALT1 OUT DE_IO	0	CLK_A>;
> -						 txclk = <&PIO0 6 ALT1 IN	NICLK	0	CLK_A>;
> -						 mdio =	 <&PIO1 0 ALT1 OUT	BYPASS	0>;
> -						 mdc =	 <&PIO1 1 ALT1 OUT	NICLK	0	CLK_A>;
> -						 rxd0 =	 <&PIO1 4 ALT1 IN DE_IO	0	CLK_A>;
> -						 rxd1 =	 <&PIO1 5 ALT1 IN DE_IO	0	CLK_A>;
> -						 rxd2 =	 <&PIO1 6 ALT1 IN DE_IO	0	CLK_A>;
> -						 rxd3 =	 <&PIO1 7 ALT1 IN DE_IO	0	CLK_A>;
> -
> -						 rxdv =	  <&PIO2 0 ALT1 IN DE_IO	500	CLK_A>;
> -						 rxclk =  <&PIO2 2 ALT1 IN	NICLK	0	CLK_A>;
> -						 phyclk = <&PIO2 3 ALT4 OUT	NICLK	0	CLK_B>;
> -
> -						 clk125= <&PIO3 7 ALT4 IN 	NICLK	0	CLK_A>;
> +						 txd0 =	 <&pio0 0 ALT1 OUT DE_IO	1000	CLK_A>;
> +						 txd1 =	 <&pio0 1 ALT1 OUT DE_IO	1000	CLK_A>;
> +						 txd2 =	 <&pio0 2 ALT1 OUT DE_IO	1000	CLK_A>;
> +						 txd3 =	 <&pio0 3 ALT1 OUT DE_IO	1000	CLK_A>;
> +						 txen =	 <&pio0 5 ALT1 OUT DE_IO	0	CLK_A>;
> +						 txclk = <&pio0 6 ALT1 IN	NICLK	0	CLK_A>;
> +						 mdio =	 <&pio1 0 ALT1 OUT	BYPASS	0>;
> +						 mdc =	 <&pio1 1 ALT1 OUT	NICLK	0	CLK_A>;
> +						 rxd0 =	 <&pio1 4 ALT1 IN DE_IO	0	CLK_A>;
> +						 rxd1 =	 <&pio1 5 ALT1 IN DE_IO	0	CLK_A>;
> +						 rxd2 =	 <&pio1 6 ALT1 IN DE_IO	0	CLK_A>;
> +						 rxd3 =	 <&pio1 7 ALT1 IN DE_IO	0	CLK_A>;
> +
> +						 rxdv =	  <&pio2 0 ALT1 IN DE_IO	500	CLK_A>;
> +						 rxclk =  <&pio2 2 ALT1 IN	NICLK	0	CLK_A>;
> +						 phyclk = <&pio2 3 ALT4 OUT	NICLK	0	CLK_B>;
> +
> +						 clk125= <&pio3 7 ALT4 IN 	NICLK	0	CLK_A>;
>  					};
>  				};
>  			};
> @@ -206,7 +206,7 @@
>  			interrupts-names = "irqmux";
>  			ranges		= <0 0xfee00000 0x8000>;
>  
> -			PIO5: gpio@fee00000 {
> +			pio5: gpio@fee00000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -214,7 +214,7 @@
>  				reg		= <0 0x100>;
>  				st,bank-name	= "PIO5";
>  			};
> -			PIO6: gpio@fee01000 {
> +			pio6: gpio@fee01000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -222,7 +222,7 @@
>  				reg		= <0x1000 0x100>;
>  				st,bank-name	= "PIO6";
>  			};
> -			PIO7: gpio@fee02000 {
> +			pio7: gpio@fee02000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -230,7 +230,7 @@
>  				reg		= <0x2000 0x100>;
>  				st,bank-name	= "PIO7";
>  			};
> -			PIO8: gpio@fee03000 {
> +			pio8: gpio@fee03000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -238,7 +238,7 @@
>  				reg		= <0x3000 0x100>;
>  				st,bank-name	= "PIO8";
>  			};
> -			PIO9: gpio@fee04000 {
> +			pio9: gpio@fee04000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -246,7 +246,7 @@
>  				reg		= <0x4000 0x100>;
>  				st,bank-name	= "PIO9";
>  			};
> -			PIO10: gpio@fee05000 {
> +			pio10: gpio@fee05000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -254,7 +254,7 @@
>  				reg		= <0x5000 0x100>;
>  				st,bank-name	= "PIO10";
>  			};
> -			PIO11: gpio@fee06000 {
> +			pio11: gpio@fee06000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -262,7 +262,7 @@
>  				reg		= <0x6000 0x100>;
>  				st,bank-name	= "PIO11";
>  			};
> -			PIO12: gpio@fee07000 {
> +			pio12: gpio@fee07000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -274,8 +274,8 @@
>  			i2c0 {
>  				pinctrl_i2c0_default: i2c0-default {
>  					st,pins {
> -						sda = <&PIO9 3 ALT1 BIDIR>;
> -						scl = <&PIO9 2 ALT1 BIDIR>;
> +						sda = <&pio9 3 ALT1 BIDIR>;
> +						scl = <&pio9 2 ALT1 BIDIR>;
>  					};
>  				};
>  			};
> @@ -283,8 +283,8 @@
>  			i2c1 {
>  				pinctrl_i2c1_default: i2c1-default {
>  					st,pins {
> -						sda = <&PIO12 1 ALT1 BIDIR>;
> -						scl = <&PIO12 0 ALT1 BIDIR>;
> +						sda = <&pio12 1 ALT1 BIDIR>;
> +						scl = <&pio12 0 ALT1 BIDIR>;
>  					};
>  				};
>  			};
> @@ -301,7 +301,7 @@
>  			interrupts-names = "irqmux";
>  			ranges		= <0 0xfe820000 0x8000>;
>  
> -			PIO13: gpio@fe820000 {
> +			pio13: gpio@fe820000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -309,7 +309,7 @@
>  				reg		= <0 0x100>;
>  				st,bank-name	= "PIO13";
>  			};
> -			PIO14: gpio@fe821000 {
> +			pio14: gpio@fe821000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -317,7 +317,7 @@
>  				reg		= <0x1000 0x100>;
>  				st,bank-name	= "PIO14";
>  			};
> -			PIO15: gpio@fe822000 {
> +			pio15: gpio@fe822000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -325,7 +325,7 @@
>  				reg		= <0x2000 0x100>;
>  				st,bank-name	= "PIO15";
>  			};
> -			PIO16: gpio@fe823000 {
> +			pio16: gpio@fe823000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -333,7 +333,7 @@
>  				reg		= <0x3000 0x100>;
>  				st,bank-name	= "PIO16";
>  			};
> -			PIO17: gpio@fe824000 {
> +			pio17: gpio@fe824000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -341,7 +341,7 @@
>  				reg		= <0x4000 0x100>;
>  				st,bank-name	= "PIO17";
>  			};
> -			PIO18: gpio@fe825000 {
> +			pio18: gpio@fe825000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -353,8 +353,8 @@
>  			serial2 {
>  				pinctrl_serial2: serial2-0 {
>  					st,pins {
> -						tx	= <&PIO17 4 ALT2 OUT>;
> -						rx	= <&PIO17 5 ALT2 IN>;
> +						tx	= <&pio17 4 ALT2 OUT>;
> +						rx	= <&pio17 5 ALT2 IN>;
>  					};
>  				};
>  			};
> @@ -362,68 +362,68 @@
>  			gmac0{
>  				pinctrl_mii0: mii0 {
>  					st,pins {
> -					 mdint =	<&PIO13 6 ALT2	IN	BYPASS		0>;
> -					 txen =		<&PIO13 7 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
> -
> -					 txd0 =		<&PIO14 0 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
> -					 txd1 =		<&PIO14 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
> -					 txd2 =		<&PIO14 2 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
> -					 txd3 =		<&PIO14 3 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
> -
> -					 txclk =	<&PIO15 0 ALT2	IN	NICLK		0	CLK_A>;
> -					 txer =		<&PIO15 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
> -					 crs =		<&PIO15 2 ALT2	IN	BYPASS		1000>;
> -					 col =		<&PIO15 3 ALT2	IN	BYPASS		1000>;
> -					 mdio  =        <&PIO15 4 ALT2	OUT	BYPASS 	3000>;
> -					 mdc   =        <&PIO15 5 ALT2	OUT     NICLK  	0    	CLK_B>;
> -
> -					 rxd0 =		<&PIO16 0 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
> -					 rxd1 =		<&PIO16 1 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
> -					 rxd2 =		<&PIO16 2 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
> -					 rxd3 =		<&PIO16 3 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
> -					 rxdv =		<&PIO15 6 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
> -					 rx_er =	<&PIO15 7 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
> -					 rxclk =	<&PIO17 0 ALT2	IN	NICLK		0	CLK_A>;
> -					 phyclk =	<&PIO13 5 ALT2	OUT	NICLK	1000	CLK_A>;
> +					 mdint =	<&pio13 6 ALT2	IN	BYPASS		0>;
> +					 txen =		<&pio13 7 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
> +
> +					 txd0 =		<&pio14 0 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
> +					 txd1 =		<&pio14 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
> +					 txd2 =		<&pio14 2 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
> +					 txd3 =		<&pio14 3 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
> +
> +					 txclk =	<&pio15 0 ALT2	IN	NICLK		0	CLK_A>;
> +					 txer =		<&pio15 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
> +					 crs =		<&pio15 2 ALT2	IN	BYPASS		1000>;
> +					 col =		<&pio15 3 ALT2	IN	BYPASS		1000>;
> +					 mdio  =        <&pio15 4 ALT2	OUT	BYPASS 	3000>;
> +					 mdc   =        <&pio15 5 ALT2	OUT     NICLK  	0    	CLK_B>;
> +
> +					 rxd0 =		<&pio16 0 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
> +					 rxd1 =		<&pio16 1 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
> +					 rxd2 =		<&pio16 2 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
> +					 rxd3 =		<&pio16 3 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
> +					 rxdv =		<&pio15 6 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
> +					 rx_er =	<&pio15 7 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
> +					 rxclk =	<&pio17 0 ALT2	IN	NICLK		0	CLK_A>;
> +					 phyclk =	<&pio13 5 ALT2	OUT	NICLK	1000	CLK_A>;
>  
>  					};
>  				};
>  
>  			pinctrl_gmii0: gmii0 {
>  				st,pins {
> -					 mdint =	<&PIO13 6	ALT2 IN		BYPASS	0>;
> -					 mdio  =        <&PIO15 4 	ALT2 OUT	BYPASS 	3000>;
> -					 mdc   =        <&PIO15 5 	ALT2 OUT    	NICLK  	0    	CLK_B>;
> -					 txen =		<&PIO13 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
> -
> -					 txd0 =		<&PIO14 0	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
> -					 txd1 =		<&PIO14 1	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
> -					 txd2 =		<&PIO14 2	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
> -					 txd3 =		<&PIO14 3	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
> -					 txd4 =		<&PIO14 4	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
> -					 txd5 =		<&PIO14 5	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
> -					 txd6 =		<&PIO14 6	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
> -					 txd7 =		<&PIO14 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
> -
> -					 txclk =	<&PIO15 0	ALT2 IN		NICLK	0	CLK_A>;
> -					 txer =		<&PIO15 1	ALT2 OUT 	SE_NICLK_IO	3000	CLK_A>;
> -					 crs =		<&PIO15 2	ALT2 IN		BYPASS	1000>;
> -					 col =		<&PIO15 3	ALT2 IN		BYPASS	1000>;
> -					 rxdv =		<&PIO15 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> -					 rx_er =	<&PIO15 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> -
> -					 rxd0 =		<&PIO16 0	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> -					 rxd1 =		<&PIO16 1	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> -					 rxd2 =		<&PIO16 2	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> -					 rxd3 =		<&PIO16 3	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> -					 rxd4 =		<&PIO16 4	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> -					 rxd5 =		<&PIO16 5	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> -					 rxd6 =		<&PIO16 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> -					 rxd7 =		<&PIO16 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> -
> -					 rxclk =	<&PIO17 0	ALT2 IN	NICLK	0	CLK_A>;
> -					 clk125 =	<&PIO17 6	ALT1 IN	NICLK	0	CLK_A>;
> -                                         phyclk =       <&PIO13 5       ALT4 OUT NICLK   0       CLK_B>;
> +					 mdint =	<&pio13 6	ALT2 IN		BYPASS	0>;
> +					 mdio  =        <&pio15 4 	ALT2 OUT	BYPASS 	3000>;
> +					 mdc   =        <&pio15 5 	ALT2 OUT    	NICLK  	0    	CLK_B>;
> +					 txen =		<&pio13 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
> +
> +					 txd0 =		<&pio14 0	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
> +					 txd1 =		<&pio14 1	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
> +					 txd2 =		<&pio14 2	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
> +					 txd3 =		<&pio14 3	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
> +					 txd4 =		<&pio14 4	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
> +					 txd5 =		<&pio14 5	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
> +					 txd6 =		<&pio14 6	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
> +					 txd7 =		<&pio14 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
> +
> +					 txclk =	<&pio15 0	ALT2 IN		NICLK	0	CLK_A>;
> +					 txer =		<&pio15 1	ALT2 OUT 	SE_NICLK_IO	3000	CLK_A>;
> +					 crs =		<&pio15 2	ALT2 IN		BYPASS	1000>;
> +					 col =		<&pio15 3	ALT2 IN		BYPASS	1000>;
> +					 rxdv =		<&pio15 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> +					 rx_er =	<&pio15 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> +
> +					 rxd0 =		<&pio16 0	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> +					 rxd1 =		<&pio16 1	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> +					 rxd2 =		<&pio16 2	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> +					 rxd3 =		<&pio16 3	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> +					 rxd4 =		<&pio16 4	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> +					 rxd5 =		<&pio16 5	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> +					 rxd6 =		<&pio16 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> +					 rxd7 =		<&pio16 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
> +
> +					 rxclk =	<&pio17 0	ALT2 IN	NICLK	0	CLK_A>;
> +					 clk125 =	<&pio17 6	ALT1 IN	NICLK	0	CLK_A>;
> +                                         phyclk =       <&pio13 5       ALT4 OUT NICLK   0       CLK_B>;
>  
>  
>  					};
> @@ -442,7 +442,7 @@
>  			interrupts-names = "irqmux";
>  			ranges		= <0 0xfd6b0000 0x3000>;
>  
> -			PIO100: gpio@fd6b0000 {
> +			pio100: gpio@fd6b0000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -450,7 +450,7 @@
>  				reg		= <0 0x100>;
>  				st,bank-name	= "PIO100";
>  			};
> -			PIO101: gpio@fd6b1000 {
> +			pio101: gpio@fd6b1000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -458,7 +458,7 @@
>  				reg		= <0x1000 0x100>;
>  				st,bank-name	= "PIO101";
>  			};
> -			PIO102: gpio@fd6b2000 {
> +			pio102: gpio@fd6b2000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -479,7 +479,7 @@
>  			interrupts-names = "irqmux";
>  			ranges		= <0 0xfd330000 0x5000>;
>  
> -			PIO103: gpio@fd330000 {
> +			pio103: gpio@fd330000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -487,7 +487,7 @@
>  				reg		= <0 0x100>;
>  				st,bank-name	= "PIO103";
>  			};
> -			PIO104: gpio@fd331000 {
> +			pio104: gpio@fd331000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -495,7 +495,7 @@
>  				reg		= <0x1000 0x100>;
>  				st,bank-name	= "PIO104";
>  			};
> -			PIO105: gpio@fd332000 {
> +			pio105: gpio@fd332000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -503,7 +503,7 @@
>  				reg		= <0x2000 0x100>;
>  				st,bank-name	= "PIO105";
>  			};
> -			PIO106: gpio@fd333000 {
> +			pio106: gpio@fd333000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -511,7 +511,7 @@
>  				reg		= <0x3000 0x100>;
>  				st,bank-name	= "PIO106";
>  			};
> -			PIO107: gpio@fd334000 {
> +			pio107: gpio@fd334000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts
> index ba0fa2c..d72e5c7 100644
> --- a/arch/arm/boot/dts/stih416-b2020-revE.dts
> +++ b/arch/arm/boot/dts/stih416-b2020-revE.dts
> @@ -19,17 +19,17 @@
>  			red {
>  				#gpio-cells		= <1>;
>  				label			= "Front Panel LED";
> -				gpios			= <&PIO4 1>;
> +				gpios			= <&pio4 1>;
>  				linux,default-trigger	= "heartbeat";
>  			};
>  			green {
> -				gpios			= <&PIO1 3>;
> +				gpios			= <&pio1 3>;
>  				default-state 		= "off";
>  			};
>  		};
>  
>  		ethernet1: dwmac@fef08000 {
> -			snps,reset-gpio = <&PIO0 7>;
> +			snps,reset-gpio = <&pio0 7>;
>  		};
>  	};
>  };
> diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
> index 6252188..3e06d7f 100644
> --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
> @@ -12,36 +12,36 @@
>  / {
>  
>  	aliases {
> -		gpio0	= &PIO0;
> -		gpio1	= &PIO1;
> -		gpio2	= &PIO2;
> -		gpio3	= &PIO3;
> -		gpio4	= &PIO4;
> -		gpio5	= &PIO40;
> -		gpio6	= &PIO5;
> -		gpio7	= &PIO6;
> -		gpio8	= &PIO7;
> -		gpio9	= &PIO8;
> -		gpio10	= &PIO9;
> -		gpio11	= &PIO10;
> -		gpio12	= &PIO11;
> -		gpio13	= &PIO12;
> -		gpio14	= &PIO30;
> -		gpio15	= &PIO31;
> -		gpio16	= &PIO13;
> -		gpio17	= &PIO14;
> -		gpio18	= &PIO15;
> -		gpio19	= &PIO16;
> -		gpio20	= &PIO17;
> -		gpio21	= &PIO18;
> -		gpio22	= &PIO100;
> -		gpio23	= &PIO101;
> -		gpio24	= &PIO102;
> -		gpio25	= &PIO103;
> -		gpio26	= &PIO104;
> -		gpio27	= &PIO105;
> -		gpio28	= &PIO106;
> -		gpio29	= &PIO107;
> +		gpio0	= &pio0;
> +		gpio1	= &pio1;
> +		gpio2	= &pio2;
> +		gpio3	= &pio3;
> +		gpio4	= &pio4;
> +		gpio5	= &pio40;
> +		gpio6	= &pio5;
> +		gpio7	= &pio6;
> +		gpio8	= &pio7;
> +		gpio9	= &pio8;
> +		gpio10	= &pio9;
> +		gpio11	= &pio10;
> +		gpio12	= &pio11;
> +		gpio13	= &pio12;
> +		gpio14	= &pio30;
> +		gpio15	= &pio31;
> +		gpio16	= &pio13;
> +		gpio17	= &pio14;
> +		gpio18	= &pio15;
> +		gpio19	= &pio16;
> +		gpio20	= &pio17;
> +		gpio21	= &pio18;
> +		gpio22	= &pio100;
> +		gpio23	= &pio101;
> +		gpio24	= &pio102;
> +		gpio25	= &pio103;
> +		gpio26	= &pio104;
> +		gpio27	= &pio105;
> +		gpio28	= &pio106;
> +		gpio29	= &pio107;
>  	};
>  
>  	soc {
> @@ -56,7 +56,7 @@
>  			interrupts-names = "irqmux";
>  			ranges		= <0 0xfe610000 0x6000>;
>  
> -			PIO0: gpio@fe610000 {
> +			pio0: gpio@fe610000 {
>  				gpio-controller;
>  				#gpio-cells = <1>;
>  				interrupt-controller;
> @@ -64,7 +64,7 @@
>  				reg		= <0 0x100>;
>  				st,bank-name	= "PIO0";
>  			};
> -			PIO1: gpio@fe611000 {
> +			pio1: gpio@fe611000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -72,7 +72,7 @@
>  				reg		= <0x1000 0x100>;
>  				st,bank-name	= "PIO1";
>  			};
> -			PIO2: gpio@fe612000 {
> +			pio2: gpio@fe612000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -80,7 +80,7 @@
>  				reg		= <0x2000 0x100>;
>  				st,bank-name	= "PIO2";
>  			};
> -			PIO3: gpio@fe613000 {
> +			pio3: gpio@fe613000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -88,7 +88,7 @@
>  				reg		= <0x3000 0x100>;
>  				st,bank-name	= "PIO3";
>  			};
> -			PIO4: gpio@fe614000 {
> +			pio4: gpio@fe614000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -96,7 +96,7 @@
>  				reg		= <0x4000 0x100>;
>  				st,bank-name	= "PIO4";
>  			};
> -			PIO40: gpio@fe615000 {
> +			pio40: gpio@fe615000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -109,15 +109,15 @@
>  			rc{
>  				pinctrl_ir: ir0 {
>  					st,pins {
> -						ir = <&PIO4 0 ALT2 IN>;
> +						ir = <&pio4 0 ALT2 IN>;
>  					};
>  				};
>  			};
>  			sbc_serial1 {
>  				pinctrl_sbc_serial1: sbc_serial1 {
>  					st,pins {
> -						tx	= <&PIO2 6 ALT3 OUT>;
> -						rx	= <&PIO2 7 ALT3 IN>;
> +						tx	= <&pio2 6 ALT3 OUT>;
> +						rx	= <&pio2 7 ALT3 IN>;
>  					};
>  				};
>  			};
> @@ -125,15 +125,15 @@
>  			keyscan {
>  				pinctrl_keyscan: keyscan {
>  					st,pins {
> -						keyin0 = <&PIO0 2 ALT2 IN>;
> -						keyin1 = <&PIO0 3 ALT2 IN>;
> -						keyin2 = <&PIO0 4 ALT2 IN>;
> -						keyin3 = <&PIO2 6 ALT2 IN>;
> -
> -						keyout0 = <&PIO1 6 ALT2 OUT>;
> -						keyout1 = <&PIO1 7 ALT2 OUT>;
> -						keyout2 = <&PIO0 6 ALT2 OUT>;
> -						keyout3 = <&PIO2 7 ALT2 OUT>;
> +						keyin0 = <&pio0 2 ALT2 IN>;
> +						keyin1 = <&pio0 3 ALT2 IN>;
> +						keyin2 = <&pio0 4 ALT2 IN>;
> +						keyin3 = <&pio2 6 ALT2 IN>;
> +
> +						keyout0 = <&pio1 6 ALT2 OUT>;
> +						keyout1 = <&pio1 7 ALT2 OUT>;
> +						keyout2 = <&pio0 6 ALT2 OUT>;
> +						keyout3 = <&pio2 7 ALT2 OUT>;
>  					};
>  				};
>  			};
> @@ -141,8 +141,8 @@
>  			sbc_i2c0 {
>  				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
>  					st,pins {
> -						sda = <&PIO4 6 ALT1 BIDIR>;
> -						scl = <&PIO4 5 ALT1 BIDIR>;
> +						sda = <&pio4 6 ALT1 BIDIR>;
> +						scl = <&pio4 5 ALT1 BIDIR>;
>  					};
>  				};
>  			};
> @@ -150,8 +150,8 @@
>  			sbc_i2c1 {
>  				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
>  					st,pins {
> -						sda = <&PIO3 2 ALT2 BIDIR>;
> -						scl = <&PIO3 1 ALT2 BIDIR>;
> +						sda = <&pio3 2 ALT2 BIDIR>;
> +						scl = <&pio3 1 ALT2 BIDIR>;
>  					};
>  				};
>  			};
> @@ -159,51 +159,51 @@
>  			gmac1 {
>  				pinctrl_mii1: mii1 {
>  					st,pins {
> -						txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> -						txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> -						txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> -						txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> -						txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> -						txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> -						txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
> -						col =   <&PIO0 7 ALT1 IN BYPASS 1000>;
> -
> -						mdio =  <&PIO1 0 ALT1 OUT BYPASS 1500>;
> -						mdc =   <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
> -						crs =   <&PIO1 2 ALT1 IN BYPASS 1000>;
> -						mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
> -						rxd0 =  <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> -						rxd1 =  <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> -						rxd2 =  <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> -						rxd3 =  <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> -
> -						rxdv =  <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> -						rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> -						rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
> -						phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
> +						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> +						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> +						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> +						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> +						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> +						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> +						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
> +						col =   <&pio0 7 ALT1 IN BYPASS 1000>;
> +
> +						mdio =  <&pio1 0 ALT1 OUT BYPASS 1500>;
> +						mdc =   <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
> +						crs =   <&pio1 2 ALT1 IN BYPASS 1000>;
> +						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
> +						rxd0 =  <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> +						rxd1 =  <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> +						rxd2 =  <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> +						rxd3 =  <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> +
> +						rxdv =  <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> +						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> +						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
> +						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
>  					};
>  				};
>  				pinctrl_rgmii1: rgmii1-0 {
>  					st,pins {
> -						txd0 =  <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>;
> -						txd1 =  <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>;
> -						txd2 =  <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>;
> -						txd3 =  <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>;
> -						txen =  <&PIO0 5 ALT1 OUT DE_IO 0   CLK_A>;
> -						txclk = <&PIO0 6 ALT1 IN  NICLK 0   CLK_A>;
> -
> -						mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
> -						mdc  = <&PIO1 1 ALT1 OUT NICLK  0 CLK_A>;
> -						rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>;
> -						rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>;
> -						rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>;
> -						rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>;
> -
> -						rxdv   = <&PIO2 0 ALT1 IN  DE_IO 500 CLK_A>;
> -						rxclk  = <&PIO2 2 ALT1 IN  NICLK 0   CLK_A>;
> -						phyclk = <&PIO2 3 ALT4 OUT NICLK 0   CLK_B>;
> -
> -						clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
> +						txd0 =  <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
> +						txd1 =  <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
> +						txd2 =  <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
> +						txd3 =  <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
> +						txen =  <&pio0 5 ALT1 OUT DE_IO 0   CLK_A>;
> +						txclk = <&pio0 6 ALT1 IN  NICLK 0   CLK_A>;
> +
> +						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
> +						mdc  = <&pio1 1 ALT1 OUT NICLK  0 CLK_A>;
> +						rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
> +						rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
> +						rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
> +						rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
> +
> +						rxdv   = <&pio2 0 ALT1 IN  DE_IO 500 CLK_A>;
> +						rxclk  = <&pio2 2 ALT1 IN  NICLK 0   CLK_A>;
> +						phyclk = <&pio2 3 ALT4 OUT NICLK 0   CLK_B>;
> +
> +						clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
>  					};
>  				};
>  			};
> @@ -220,7 +220,7 @@
>  			interrupts-names = "irqmux";
>  			ranges		= <0 0xfee00000 0x10000>;
>  
> -			PIO5: gpio@fee00000 {
> +			pio5: gpio@fee00000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -228,7 +228,7 @@
>  				reg		= <0 0x100>;
>  				st,bank-name	= "PIO5";
>  			};
> -			PIO6: gpio@fee01000 {
> +			pio6: gpio@fee01000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -236,7 +236,7 @@
>  				reg		= <0x1000 0x100>;
>  				st,bank-name	= "PIO6";
>  			};
> -			PIO7: gpio@fee02000 {
> +			pio7: gpio@fee02000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -244,7 +244,7 @@
>  				reg		= <0x2000 0x100>;
>  				st,bank-name	= "PIO7";
>  			};
> -			PIO8: gpio@fee03000 {
> +			pio8: gpio@fee03000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -252,7 +252,7 @@
>  				reg		= <0x3000 0x100>;
>  				st,bank-name	= "PIO8";
>  			};
> -			PIO9: gpio@fee04000 {
> +			pio9: gpio@fee04000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -260,7 +260,7 @@
>  				reg		= <0x4000 0x100>;
>  				st,bank-name	= "PIO9";
>  			};
> -			PIO10: gpio@fee05000 {
> +			pio10: gpio@fee05000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -268,7 +268,7 @@
>  				reg		= <0x5000 0x100>;
>  				st,bank-name	= "PIO10";
>  			};
> -			PIO11: gpio@fee06000 {
> +			pio11: gpio@fee06000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -276,7 +276,7 @@
>  				reg		= <0x6000 0x100>;
>  				st,bank-name	= "PIO11";
>  			};
> -			PIO12: gpio@fee07000 {
> +			pio12: gpio@fee07000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -284,7 +284,7 @@
>  				reg		= <0x7000 0x100>;
>  				st,bank-name	= "PIO12";
>  			};
> -			PIO30: gpio@fee08000 {
> +			pio30: gpio@fee08000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -292,7 +292,7 @@
>  				reg		= <0x8000 0x100>;
>  				st,bank-name	= "PIO30";
>  			};
> -			PIO31: gpio@fee09000 {
> +			pio31: gpio@fee09000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -304,7 +304,7 @@
>  			serial2-oe {
>  				pinctrl_serial2_oe: serial2-1 {
>  					st,pins {
> -						output-enable	= <&PIO11 3 ALT2 OUT>;
> +						output-enable	= <&pio11 3 ALT2 OUT>;
>  					};
>  				};
>  			};
> @@ -312,8 +312,8 @@
>  			i2c0 {
>  				pinctrl_i2c0_default: i2c0-default {
>  					st,pins {
> -						sda = <&PIO9 3 ALT1 BIDIR>;
> -						scl = <&PIO9 2 ALT1 BIDIR>;
> +						sda = <&pio9 3 ALT1 BIDIR>;
> +						scl = <&pio9 2 ALT1 BIDIR>;
>  					};
>  				};
>  			};
> @@ -321,8 +321,8 @@
>  			i2c1 {
>  				pinctrl_i2c1_default: i2c1-default {
>  					st,pins {
> -						sda = <&PIO12 1 ALT1 BIDIR>;
> -						scl = <&PIO12 0 ALT1 BIDIR>;
> +						sda = <&pio12 1 ALT1 BIDIR>;
> +						scl = <&pio12 0 ALT1 BIDIR>;
>  					};
>  				};
>  			};
> @@ -330,12 +330,12 @@
>  			fsm {
>  				pinctrl_fsm: fsm {
>  					st,pins {
> -						spi-fsm-clk  = <&PIO12 2 ALT1 OUT>;
> -						spi-fsm-cs   = <&PIO12 3 ALT1 OUT>;
> -						spi-fsm-mosi = <&PIO12 4 ALT1 OUT>;
> -						spi-fsm-miso = <&PIO12 5 ALT1 IN>;
> -						spi-fsm-hol  = <&PIO12 6 ALT1 OUT>;
> -						spi-fsm-wp   = <&PIO12 7 ALT1 OUT>;
> +						spi-fsm-clk  = <&pio12 2 ALT1 OUT>;
> +						spi-fsm-cs   = <&pio12 3 ALT1 OUT>;
> +						spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
> +						spi-fsm-miso = <&pio12 5 ALT1 IN>;
> +						spi-fsm-hol  = <&pio12 6 ALT1 OUT>;
> +						spi-fsm-wp   = <&pio12 7 ALT1 OUT>;
>  					};
>  				};
>  			};
> @@ -352,7 +352,7 @@
>  			interrupts-names = "irqmux";
>  			ranges 		= <0 0xfe820000 0x6000>;
>  
> -			PIO13: gpio@fe820000 {
> +			pio13: gpio@fe820000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -360,7 +360,7 @@
>  				reg		= <0 0x100>;
>  				st,bank-name	= "PIO13";
>  			};
> -			PIO14: gpio@fe821000 {
> +			pio14: gpio@fe821000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -368,7 +368,7 @@
>  				reg		= <0x1000 0x100>;
>  				st,bank-name	= "PIO14";
>  			};
> -			PIO15: gpio@fe822000 {
> +			pio15: gpio@fe822000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -376,7 +376,7 @@
>  				reg		= <0x2000 0x100>;
>  				st,bank-name	= "PIO15";
>  			};
> -			PIO16: gpio@fe823000 {
> +			pio16: gpio@fe823000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -384,7 +384,7 @@
>  				reg		= <0x3000 0x100>;
>  				st,bank-name	= "PIO16";
>  			};
> -			PIO17: gpio@fe824000 {
> +			pio17: gpio@fe824000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -392,7 +392,7 @@
>  				reg		= <0x4000 0x100>;
>  				st,bank-name	= "PIO17";
>  			};
> -			PIO18: gpio@fe825000 {
> +			pio18: gpio@fe825000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -405,8 +405,8 @@
>  			serial2 {
>  				pinctrl_serial2: serial2-0 {
>  					st,pins {
> -						tx	= <&PIO17 4 ALT2 OUT>;
> -						rx	= <&PIO17 5 ALT2 IN>;
> +						tx	= <&pio17 4 ALT2 OUT>;
> +						rx	= <&pio17 5 ALT2 IN>;
>  					};
>  				};
>  			};
> @@ -414,28 +414,28 @@
>  			gmac0 {
>  				pinctrl_mii0: mii0 {
>  					st,pins {
> -						mdint = <&PIO13 6 ALT2 IN  BYPASS      0>;
> -						txen =  <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
> -						txd0 =  <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
> -						txd1 =  <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
> -						txd2 =  <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
> -						txd3 =  <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
> -
> -						txclk = <&PIO15 0 ALT2 IN  NICLK       0 CLK_A>;
> -						txer =  <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
> -						crs = <&PIO15 2 ALT2 IN  BYPASS 1000>;
> -						col = <&PIO15 3 ALT2 IN  BYPASS 1000>;
> -						mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>;
> -						mdc = <&PIO15 5 ALT2 OUT NICLK  0    CLK_B>;
> -
> -						rxd0 =  <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
> -						rxd1 =  <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
> -						rxd2 =  <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
> -						rxd3 =  <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
> -						rxdv =  <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
> -						rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
> -						rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
> -						phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>;
> +						mdint = <&pio13 6 ALT2 IN  BYPASS      0>;
> +						txen =  <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
> +						txd0 =  <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
> +						txd1 =  <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
> +						txd2 =  <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
> +						txd3 =  <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
> +
> +						txclk = <&pio15 0 ALT2 IN  NICLK       0 CLK_A>;
> +						txer =  <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
> +						crs = <&pio15 2 ALT2 IN  BYPASS 1000>;
> +						col = <&pio15 3 ALT2 IN  BYPASS 1000>;
> +						mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
> +						mdc = <&pio15 5 ALT2 OUT NICLK  0    CLK_B>;
> +
> +						rxd0 =  <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
> +						rxd1 =  <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
> +						rxd2 =  <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
> +						rxd3 =  <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
> +						rxdv =  <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
> +						rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
> +						rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
> +						phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
>  					};
>  				};
>  
> @@ -445,25 +445,25 @@
>  				};
>  				pinctrl_rgmii0: rgmii0 {
>  					st,pins {
> -						 phyclk = <&PIO13  5 ALT4 OUT NICLK 0 CLK_B>;
> -						 txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>;
> -						 txd0  = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>;
> -						 txd1  = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>;
> -						 txd2  = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>;
> -						 txd3  = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>;
> -						 txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
> -
> -						 mdio = <&PIO15 4 ALT2 OUT BYPASS 0>;
> -						 mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
> -
> -						 rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>;
> -						 rxd0 =<&PIO16 0 ALT2 IN DE_IO	500 CLK_A>;
> -						 rxd1 =<&PIO16 1 ALT2 IN DE_IO	500 CLK_A>;
> -						 rxd2 =<&PIO16 2 ALT2 IN DE_IO	500 CLK_A>;
> -						 rxd3  =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>;
> -						 rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
> -
> -						 clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
> +						 phyclk = <&pio13  5 ALT4 OUT NICLK 0 CLK_B>;
> +						 txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
> +						 txd0  = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
> +						 txd1  = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
> +						 txd2  = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
> +						 txd3  = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
> +						 txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
> +
> +						 mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
> +						 mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
> +
> +						 rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
> +						 rxd0 =<&pio16 0 ALT2 IN DE_IO	500 CLK_A>;
> +						 rxd1 =<&pio16 1 ALT2 IN DE_IO	500 CLK_A>;
> +						 rxd2 =<&pio16 2 ALT2 IN DE_IO	500 CLK_A>;
> +						 rxd3  =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
> +						 rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
> +
> +						 clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
>  					};
>  				};
>  			};
> @@ -480,7 +480,7 @@
>  			interrupts-names = "irqmux";
>  			ranges		= <0 0xfd6b0000 0x3000>;
>  
> -			PIO100: gpio@fd6b0000 {
> +			pio100: gpio@fd6b0000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -488,7 +488,7 @@
>  				reg		= <0 0x100>;
>  				st,bank-name	= "PIO100";
>  			};
> -			PIO101: gpio@fd6b1000 {
> +			pio101: gpio@fd6b1000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -496,7 +496,7 @@
>  				reg		= <0x1000 0x100>;
>  				st,bank-name	= "PIO101";
>  			};
> -			PIO102: gpio@fd6b2000 {
> +			pio102: gpio@fd6b2000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -517,7 +517,7 @@
>  			interrupts-names = "irqmux";
>  			ranges			= <0 0xfd330000 0x5000>;
>  
> -			PIO103: gpio@fd330000 {
> +			pio103: gpio@fd330000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -525,7 +525,7 @@
>  				reg		= <0 0x100>;
>  				st,bank-name	= "PIO103";
>  			};
> -			PIO104: gpio@fd331000 {
> +			pio104: gpio@fd331000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -533,7 +533,7 @@
>  				reg		= <0x1000 0x100>;
>  				st,bank-name	= "PIO104";
>  			};
> -			PIO105: gpio@fd332000 {
> +			pio105: gpio@fd332000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -541,7 +541,7 @@
>  				reg		= <0x2000 0x100>;
>  				st,bank-name	= "PIO105";
>  			};
> -			PIO106: gpio@fd333000 {
> +			pio106: gpio@fd333000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> @@ -550,7 +550,7 @@
>  				st,bank-name	= "PIO106";
>  			};
>  
> -			PIO107: gpio@fd334000 {
> +			pio107: gpio@fd334000 {
>  				gpio-controller;
>  				#gpio-cells	= <1>;
>  				interrupt-controller;
> diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
> index b3dd6ca..5f91f45 100644
> --- a/arch/arm/boot/dts/stih41x-b2000.dtsi
> +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
> @@ -35,7 +35,7 @@
>  			fp_led {
>  				#gpio-cells = <1>;
>  				label	= "Front Panel LED";
> -				gpios	= <&PIO105 7>;
> +				gpios	= <&pio105 7>;
>  				linux,default-trigger	= "heartbeat";
>  			};
>  		};
> @@ -55,7 +55,7 @@
>  			phy-mode		= "mii";
>  			pinctrl-0		= <&pinctrl_mii0>;
>  
> -			snps,reset-gpio 	= <&PIO106 2>;
> +			snps,reset-gpio 	= <&pio106 2>;
>  			snps,reset-active-low;
>  			snps,reset-delays-us 	= <0 10000 10000>;
>  		};
> @@ -65,7 +65,7 @@
>  			phy-mode		= "mii";
>  			st,tx-retime-src	= "txclk";
>  
> -			snps,reset-gpio 	= <&PIO4 7>;
> +			snps,reset-gpio 	= <&pio4 7>;
>  			snps,reset-active-low;
>  			snps,reset-delays-us 	= <0 10000 10000>;
>  		};
> diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
> index d8a8429..c0f50e9 100644
> --- a/arch/arm/boot/dts/stih41x-b2020.dtsi
> +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
> @@ -32,11 +32,11 @@
>  			red {
>  				#gpio-cells = <1>;
>  				label	= "Front Panel LED";
> -				gpios	= <&PIO4 1>;
> +				gpios	= <&pio4 1>;
>  				linux,default-trigger	= "heartbeat";
>  			};
>  			green {
> -				gpios	= <&PIO4 7>;
> +				gpios	= <&pio4 7>;
>  				default-state = "off";
>  			};
>  		};
> @@ -68,7 +68,7 @@
>  			phy-mode		= "rgmii-id";
>  			max-speed		= <1000>;
>  			st,tx-retime-src	= "clk_125";
> -			snps,reset-gpio 	= <&PIO3 0>;
> +			snps,reset-gpio 	= <&pio3 0>;
>  			snps,reset-active-low;
>  			snps,reset-delays-us 	= <0 10000 10000>;
>
Maxime COQUELIN June 25, 2014, 3:08 p.m. UTC | #3 
On 06/25/2014 04:53 PM, Lee Jones wrote:
>> Suggested-by: Olof Johansson <olof@lixom.net>
>> Signed-off-by: Lee Jones <lee.jones@linaro.org>
>> ---
>>  arch/arm/boot/dts/stih415-pinctrl.dtsi   | 340 +++++++++++++++---------------
>>  arch/arm/boot/dts/stih416-b2020-revE.dts |   6 +-
>>  arch/arm/boot/dts/stih416-pinctrl.dtsi   | 342 +++++++++++++++----------------
>>  arch/arm/boot/dts/stih41x-b2000.dtsi     |   6 +-
>>  arch/arm/boot/dts/stih41x-b2020.dtsi     |   6 +-
>>  5 files changed, 350 insertions(+), 350 deletions(-)
> 
> What happened to this Maxime?
> 
> It was Acked by Olof, then died.  Did it slip through the net?
> 

You sent it to the ML after my last pull request for v3.16.
I think to take it for v3.17, but maybe you think it can go in next v3.16 rc?
If so, maybe Arnd or Olof can pick it directly, since we only have this single
patch for v3.16 fixes currently?

Anyway, you will have to rebase it I think, since stih416-b2020-revE.dts has
been renamed to stih416-b2020e.dts.

Don't hesitate to add my:
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>

Regards,
Maxime

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
Olof Johansson June 25, 2014, 3:26 p.m. UTC | #4 
`On Wed, Jun 25, 2014 at 8:08 AM, Maxime Coquelin
<maxime.coquelin@st.com> wrote:
>
>
> On 06/25/2014 04:53 PM, Lee Jones wrote:
>>> Suggested-by: Olof Johansson <olof@lixom.net>
>>> Signed-off-by: Lee Jones <lee.jones@linaro.org>
>>> ---
>>>  arch/arm/boot/dts/stih415-pinctrl.dtsi   | 340 +++++++++++++++---------------
>>>  arch/arm/boot/dts/stih416-b2020-revE.dts |   6 +-
>>>  arch/arm/boot/dts/stih416-pinctrl.dtsi   | 342 +++++++++++++++----------------
>>>  arch/arm/boot/dts/stih41x-b2000.dtsi     |   6 +-
>>>  arch/arm/boot/dts/stih41x-b2020.dtsi     |   6 +-
>>>  5 files changed, 350 insertions(+), 350 deletions(-)
>>
>> What happened to this Maxime?
>>
>> It was Acked by Olof, then died.  Did it slip through the net?
>>
>
> You sent it to the ML after my last pull request for v3.16.
> I think to take it for v3.17, but maybe you think it can go in next v3.16 rc?
> If so, maybe Arnd or Olof can pick it directly, since we only have this single
> patch for v3.16 fixes currently?

If you have only one patch, then please send it to us as a fresh copy
with git send-email to arm@kernel.org + the usual lists.

You need to apply it and test it on hardware before anyway, right? We
certainly can't do that for you.



-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
Maxime COQUELIN June 25, 2014, 3:37 p.m. UTC | #5 
Hi Olof,

On 06/25/2014 05:26 PM, Olof Johansson wrote:
> `On Wed, Jun 25, 2014 at 8:08 AM, Maxime Coquelin 
> <maxime.coquelin@st.com> wrote:
>> 
>> 
>> On 06/25/2014 04:53 PM, Lee Jones wrote:
>>>> Suggested-by: Olof Johansson <olof@lixom.net> Signed-off-by:
>>>> Lee Jones <lee.jones@linaro.org> --- 
>>>> arch/arm/boot/dts/stih415-pinctrl.dtsi   | 340
>>>> +++++++++++++++--------------- 
>>>> arch/arm/boot/dts/stih416-b2020-revE.dts |   6 +- 
>>>> arch/arm/boot/dts/stih416-pinctrl.dtsi   | 342
>>>> +++++++++++++++---------------- 
>>>> arch/arm/boot/dts/stih41x-b2000.dtsi     |   6 +- 
>>>> arch/arm/boot/dts/stih41x-b2020.dtsi     |   6 +- 5 files
>>>> changed, 350 insertions(+), 350 deletions(-)
>>> 
>>> What happened to this Maxime?
>>> 
>>> It was Acked by Olof, then died.  Did it slip through the net?
>>> 
>> 
>> You sent it to the ML after my last pull request for v3.16. I
>> think to take it for v3.17, but maybe you think it can go in next
>> v3.16 rc? If so, maybe Arnd or Olof can pick it directly, since
>> we only have this single patch for v3.16 fixes currently?
> 
> If you have only one patch, then please send it to us as a fresh
> copy with git send-email to arm@kernel.org + the usual lists.
> 
> You need to apply it and test it on hardware before anyway, right?
> We certainly can't do that for you.

Sure, rebase and testing has to be done on our side.

I will add this patch to my queue for v3.17.

Regards,
Maxime

> 
> 
> 
> -Olof
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index caeac7e..1e0255d 100644
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -11,33 +11,33 @@ 
 / {
 
 	aliases {
-		gpio0	= &PIO0;
-		gpio1	= &PIO1;
-		gpio2	= &PIO2;
-		gpio3	= &PIO3;
-		gpio4	= &PIO4;
-		gpio5	= &PIO5;
-		gpio6	= &PIO6;
-		gpio7	= &PIO7;
-		gpio8	= &PIO8;
-		gpio9	= &PIO9;
-		gpio10	= &PIO10;
-		gpio11	= &PIO11;
-		gpio12	= &PIO12;
-		gpio13	= &PIO13;
-		gpio14	= &PIO14;
-		gpio15	= &PIO15;
-		gpio16	= &PIO16;
-		gpio17	= &PIO17;
-		gpio18	= &PIO18;
-		gpio19	= &PIO100;
-		gpio20	= &PIO101;
-		gpio21	= &PIO102;
-		gpio22	= &PIO103;
-		gpio23	= &PIO104;
-		gpio24	= &PIO105;
-		gpio25	= &PIO106;
-		gpio26	= &PIO107;
+		gpio0	= &pio0;
+		gpio1	= &pio1;
+		gpio2	= &pio2;
+		gpio3	= &pio3;
+		gpio4	= &pio4;
+		gpio5	= &pio5;
+		gpio6	= &pio6;
+		gpio7	= &pio7;
+		gpio8	= &pio8;
+		gpio9	= &pio9;
+		gpio10	= &pio10;
+		gpio11	= &pio11;
+		gpio12	= &pio12;
+		gpio13	= &pio13;
+		gpio14	= &pio14;
+		gpio15	= &pio15;
+		gpio16	= &pio16;
+		gpio17	= &pio17;
+		gpio18	= &pio18;
+		gpio19	= &pio100;
+		gpio20	= &pio101;
+		gpio21	= &pio102;
+		gpio22	= &pio103;
+		gpio23	= &pio104;
+		gpio24	= &pio105;
+		gpio25	= &pio106;
+		gpio26	= &pio107;
 	};
 
 	soc {
@@ -52,7 +52,7 @@ 
 			interrupts-names = "irqmux";
 			ranges 		= <0 0xfe610000 0x5000>;
 
-			PIO0: gpio@fe610000 {
+			pio0: gpio@fe610000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -60,7 +60,7 @@ 
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO0";
 			};
-			PIO1: gpio@fe611000 {
+			pio1: gpio@fe611000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -68,7 +68,7 @@ 
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO1";
 			};
-			PIO2: gpio@fe612000 {
+			pio2: gpio@fe612000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -76,7 +76,7 @@ 
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO2";
 			};
-			PIO3: gpio@fe613000 {
+			pio3: gpio@fe613000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -84,7 +84,7 @@ 
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO3";
 			};
-			PIO4: gpio@fe614000 {
+			pio4: gpio@fe614000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -96,8 +96,8 @@ 
 			sbc_serial1 {
 				pinctrl_sbc_serial1:sbc_serial1 {
 					st,pins {
-						tx	= <&PIO2 6 ALT3 OUT>;
-						rx	= <&PIO2 7 ALT3 IN>;
+						tx	= <&pio2 6 ALT3 OUT>;
+						rx	= <&pio2 7 ALT3 IN>;
 					};
 				};
 			};
@@ -105,15 +105,15 @@ 
 			keyscan {
 				pinctrl_keyscan: keyscan {
 					st,pins {
-						keyin0 = <&PIO0 2 ALT2 IN>;
-						keyin1 = <&PIO0 3 ALT2 IN>;
-						keyin2 = <&PIO0 4 ALT2 IN>;
-						keyin3 = <&PIO2 6 ALT2 IN>;
-
-						keyout0 = <&PIO1 6 ALT2 OUT>;
-						keyout1 = <&PIO1 7 ALT2 OUT>;
-						keyout2 = <&PIO0 6 ALT2 OUT>;
-						keyout3 = <&PIO2 7 ALT2 OUT>;
+						keyin0 = <&pio0 2 ALT2 IN>;
+						keyin1 = <&pio0 3 ALT2 IN>;
+						keyin2 = <&pio0 4 ALT2 IN>;
+						keyin3 = <&pio2 6 ALT2 IN>;
+
+						keyout0 = <&pio1 6 ALT2 OUT>;
+						keyout1 = <&pio1 7 ALT2 OUT>;
+						keyout2 = <&pio0 6 ALT2 OUT>;
+						keyout3 = <&pio2 7 ALT2 OUT>;
 					};
 				};
 			};
@@ -121,8 +121,8 @@ 
 			sbc_i2c0 {
 				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
 					st,pins {
-						sda = <&PIO4 6 ALT1 BIDIR>;
-						scl = <&PIO4 5 ALT1 BIDIR>;
+						sda = <&pio4 6 ALT1 BIDIR>;
+						scl = <&pio4 5 ALT1 BIDIR>;
 					};
 				};
 			};
@@ -130,8 +130,8 @@ 
 			sbc_i2c1 {
 				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
 					st,pins {
-						sda = <&PIO3 2 ALT2 BIDIR>;
-						scl = <&PIO3 1 ALT2 BIDIR>;
+						sda = <&pio3 2 ALT2 BIDIR>;
+						scl = <&pio3 1 ALT2 BIDIR>;
 					};
 				};
 			};
@@ -139,7 +139,7 @@ 
 			rc{
 				pinctrl_ir: ir0 {
 					st,pins {
-						ir = <&PIO4 0 ALT2 IN>;
+						ir = <&pio4 0 ALT2 IN>;
 					};
 				};
 			};
@@ -147,49 +147,49 @@ 
 			gmac1 {
 				pinctrl_mii1: mii1 {
 						st,pins {
-						 txd0   = <&PIO0 0 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txd1   = <&PIO0 1 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txd2   = <&PIO0 2 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txd3   = <&PIO0 3 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txer   = <&PIO0 4 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txen   = <&PIO0 5 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txclk  = <&PIO0 6 ALT1 IN   NICLK	0	CLK_A>;
-						 col    = <&PIO0 7 ALT1 IN   BYPASS	1000>;
-						 mdio   = <&PIO1 0 ALT1 OUT  BYPASS	0>;
-						 mdc    = <&PIO1 1 ALT1 OUT  NICLK	0	CLK_A>;
-						 crs    = <&PIO1 2 ALT1 IN   BYPASS	1000>;
-						 mdint  = <&PIO1 3 ALT1 IN   BYPASS	0>;
-						 rxd0   = <&PIO1 4 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxd1   = <&PIO1 5 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxd2   = <&PIO1 6 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxd3   = <&PIO1 7 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxdv   = <&PIO2 0 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rx_er  = <&PIO2 1 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxclk  = <&PIO2 2 ALT1 IN   NICLK	0	CLK_A>;
-						 phyclk = <&PIO2 3 ALT1 IN   NICLK	1000	CLK_A>;
+						 txd0   = <&pio0 0 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txd1   = <&pio0 1 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txd2   = <&pio0 2 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txd3   = <&pio0 3 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txer   = <&pio0 4 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txen   = <&pio0 5 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txclk  = <&pio0 6 ALT1 IN   NICLK	0	CLK_A>;
+						 col    = <&pio0 7 ALT1 IN   BYPASS	1000>;
+						 mdio   = <&pio1 0 ALT1 OUT  BYPASS	0>;
+						 mdc    = <&pio1 1 ALT1 OUT  NICLK	0	CLK_A>;
+						 crs    = <&pio1 2 ALT1 IN   BYPASS	1000>;
+						 mdint  = <&pio1 3 ALT1 IN   BYPASS	0>;
+						 rxd0   = <&pio1 4 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxd1   = <&pio1 5 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxd2   = <&pio1 6 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxd3   = <&pio1 7 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxdv   = <&pio2 0 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rx_er  = <&pio2 1 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxclk  = <&pio2 2 ALT1 IN   NICLK	0	CLK_A>;
+						 phyclk = <&pio2 3 ALT1 IN   NICLK	1000	CLK_A>;
 					};
 				};
 
 				pinctrl_rgmii1: rgmii1-0 {
 					st,pins {
-						 txd0 =	 <&PIO0 0 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txd1 =	 <&PIO0 1 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txd2 =	 <&PIO0 2 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txd3 =	 <&PIO0 3 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txen =	 <&PIO0 5 ALT1 OUT DE_IO	0	CLK_A>;
-						 txclk = <&PIO0 6 ALT1 IN	NICLK	0	CLK_A>;
-						 mdio =	 <&PIO1 0 ALT1 OUT	BYPASS	0>;
-						 mdc =	 <&PIO1 1 ALT1 OUT	NICLK	0	CLK_A>;
-						 rxd0 =	 <&PIO1 4 ALT1 IN DE_IO	0	CLK_A>;
-						 rxd1 =	 <&PIO1 5 ALT1 IN DE_IO	0	CLK_A>;
-						 rxd2 =	 <&PIO1 6 ALT1 IN DE_IO	0	CLK_A>;
-						 rxd3 =	 <&PIO1 7 ALT1 IN DE_IO	0	CLK_A>;
-
-						 rxdv =	  <&PIO2 0 ALT1 IN DE_IO	500	CLK_A>;
-						 rxclk =  <&PIO2 2 ALT1 IN	NICLK	0	CLK_A>;
-						 phyclk = <&PIO2 3 ALT4 OUT	NICLK	0	CLK_B>;
-
-						 clk125= <&PIO3 7 ALT4 IN 	NICLK	0	CLK_A>;
+						 txd0 =	 <&pio0 0 ALT1 OUT DE_IO	1000	CLK_A>;
+						 txd1 =	 <&pio0 1 ALT1 OUT DE_IO	1000	CLK_A>;
+						 txd2 =	 <&pio0 2 ALT1 OUT DE_IO	1000	CLK_A>;
+						 txd3 =	 <&pio0 3 ALT1 OUT DE_IO	1000	CLK_A>;
+						 txen =	 <&pio0 5 ALT1 OUT DE_IO	0	CLK_A>;
+						 txclk = <&pio0 6 ALT1 IN	NICLK	0	CLK_A>;
+						 mdio =	 <&pio1 0 ALT1 OUT	BYPASS	0>;
+						 mdc =	 <&pio1 1 ALT1 OUT	NICLK	0	CLK_A>;
+						 rxd0 =	 <&pio1 4 ALT1 IN DE_IO	0	CLK_A>;
+						 rxd1 =	 <&pio1 5 ALT1 IN DE_IO	0	CLK_A>;
+						 rxd2 =	 <&pio1 6 ALT1 IN DE_IO	0	CLK_A>;
+						 rxd3 =	 <&pio1 7 ALT1 IN DE_IO	0	CLK_A>;
+
+						 rxdv =	  <&pio2 0 ALT1 IN DE_IO	500	CLK_A>;
+						 rxclk =  <&pio2 2 ALT1 IN	NICLK	0	CLK_A>;
+						 phyclk = <&pio2 3 ALT4 OUT	NICLK	0	CLK_B>;
+
+						 clk125= <&pio3 7 ALT4 IN 	NICLK	0	CLK_A>;
 					};
 				};
 			};
@@ -206,7 +206,7 @@ 
 			interrupts-names = "irqmux";
 			ranges		= <0 0xfee00000 0x8000>;
 
-			PIO5: gpio@fee00000 {
+			pio5: gpio@fee00000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -214,7 +214,7 @@ 
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO5";
 			};
-			PIO6: gpio@fee01000 {
+			pio6: gpio@fee01000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -222,7 +222,7 @@ 
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO6";
 			};
-			PIO7: gpio@fee02000 {
+			pio7: gpio@fee02000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -230,7 +230,7 @@ 
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO7";
 			};
-			PIO8: gpio@fee03000 {
+			pio8: gpio@fee03000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -238,7 +238,7 @@ 
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO8";
 			};
-			PIO9: gpio@fee04000 {
+			pio9: gpio@fee04000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -246,7 +246,7 @@ 
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO9";
 			};
-			PIO10: gpio@fee05000 {
+			pio10: gpio@fee05000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -254,7 +254,7 @@ 
 				reg		= <0x5000 0x100>;
 				st,bank-name	= "PIO10";
 			};
-			PIO11: gpio@fee06000 {
+			pio11: gpio@fee06000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -262,7 +262,7 @@ 
 				reg		= <0x6000 0x100>;
 				st,bank-name	= "PIO11";
 			};
-			PIO12: gpio@fee07000 {
+			pio12: gpio@fee07000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -274,8 +274,8 @@ 
 			i2c0 {
 				pinctrl_i2c0_default: i2c0-default {
 					st,pins {
-						sda = <&PIO9 3 ALT1 BIDIR>;
-						scl = <&PIO9 2 ALT1 BIDIR>;
+						sda = <&pio9 3 ALT1 BIDIR>;
+						scl = <&pio9 2 ALT1 BIDIR>;
 					};
 				};
 			};
@@ -283,8 +283,8 @@ 
 			i2c1 {
 				pinctrl_i2c1_default: i2c1-default {
 					st,pins {
-						sda = <&PIO12 1 ALT1 BIDIR>;
-						scl = <&PIO12 0 ALT1 BIDIR>;
+						sda = <&pio12 1 ALT1 BIDIR>;
+						scl = <&pio12 0 ALT1 BIDIR>;
 					};
 				};
 			};
@@ -301,7 +301,7 @@ 
 			interrupts-names = "irqmux";
 			ranges		= <0 0xfe820000 0x8000>;
 
-			PIO13: gpio@fe820000 {
+			pio13: gpio@fe820000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -309,7 +309,7 @@ 
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO13";
 			};
-			PIO14: gpio@fe821000 {
+			pio14: gpio@fe821000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -317,7 +317,7 @@ 
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO14";
 			};
-			PIO15: gpio@fe822000 {
+			pio15: gpio@fe822000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -325,7 +325,7 @@ 
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO15";
 			};
-			PIO16: gpio@fe823000 {
+			pio16: gpio@fe823000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -333,7 +333,7 @@ 
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO16";
 			};
-			PIO17: gpio@fe824000 {
+			pio17: gpio@fe824000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -341,7 +341,7 @@ 
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO17";
 			};
-			PIO18: gpio@fe825000 {
+			pio18: gpio@fe825000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -353,8 +353,8 @@ 
 			serial2 {
 				pinctrl_serial2: serial2-0 {
 					st,pins {
-						tx	= <&PIO17 4 ALT2 OUT>;
-						rx	= <&PIO17 5 ALT2 IN>;
+						tx	= <&pio17 4 ALT2 OUT>;
+						rx	= <&pio17 5 ALT2 IN>;
 					};
 				};
 			};
@@ -362,68 +362,68 @@ 
 			gmac0{
 				pinctrl_mii0: mii0 {
 					st,pins {
-					 mdint =	<&PIO13 6 ALT2	IN	BYPASS		0>;
-					 txen =		<&PIO13 7 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-
-					 txd0 =		<&PIO14 0 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-					 txd1 =		<&PIO14 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-					 txd2 =		<&PIO14 2 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
-					 txd3 =		<&PIO14 3 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
-
-					 txclk =	<&PIO15 0 ALT2	IN	NICLK		0	CLK_A>;
-					 txer =		<&PIO15 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-					 crs =		<&PIO15 2 ALT2	IN	BYPASS		1000>;
-					 col =		<&PIO15 3 ALT2	IN	BYPASS		1000>;
-					 mdio  =        <&PIO15 4 ALT2	OUT	BYPASS 	3000>;
-					 mdc   =        <&PIO15 5 ALT2	OUT     NICLK  	0    	CLK_B>;
-
-					 rxd0 =		<&PIO16 0 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxd1 =		<&PIO16 1 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxd2 =		<&PIO16 2 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxd3 =		<&PIO16 3 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxdv =		<&PIO15 6 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rx_er =	<&PIO15 7 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxclk =	<&PIO17 0 ALT2	IN	NICLK		0	CLK_A>;
-					 phyclk =	<&PIO13 5 ALT2	OUT	NICLK	1000	CLK_A>;
+					 mdint =	<&pio13 6 ALT2	IN	BYPASS		0>;
+					 txen =		<&pio13 7 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
+
+					 txd0 =		<&pio14 0 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
+					 txd1 =		<&pio14 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
+					 txd2 =		<&pio14 2 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
+					 txd3 =		<&pio14 3 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
+
+					 txclk =	<&pio15 0 ALT2	IN	NICLK		0	CLK_A>;
+					 txer =		<&pio15 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
+					 crs =		<&pio15 2 ALT2	IN	BYPASS		1000>;
+					 col =		<&pio15 3 ALT2	IN	BYPASS		1000>;
+					 mdio  =        <&pio15 4 ALT2	OUT	BYPASS 	3000>;
+					 mdc   =        <&pio15 5 ALT2	OUT     NICLK  	0    	CLK_B>;
+
+					 rxd0 =		<&pio16 0 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxd1 =		<&pio16 1 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxd2 =		<&pio16 2 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxd3 =		<&pio16 3 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxdv =		<&pio15 6 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rx_er =	<&pio15 7 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxclk =	<&pio17 0 ALT2	IN	NICLK		0	CLK_A>;
+					 phyclk =	<&pio13 5 ALT2	OUT	NICLK	1000	CLK_A>;
 
 					};
 				};
 
 			pinctrl_gmii0: gmii0 {
 				st,pins {
-					 mdint =	<&PIO13 6	ALT2 IN		BYPASS	0>;
-					 mdio  =        <&PIO15 4 	ALT2 OUT	BYPASS 	3000>;
-					 mdc   =        <&PIO15 5 	ALT2 OUT    	NICLK  	0    	CLK_B>;
-					 txen =		<&PIO13 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
-
-					 txd0 =		<&PIO14 0	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
-					 txd1 =		<&PIO14 1	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
-					 txd2 =		<&PIO14 2	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd3 =		<&PIO14 3	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd4 =		<&PIO14 4	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd5 =		<&PIO14 5	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd6 =		<&PIO14 6	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd7 =		<&PIO14 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-
-					 txclk =	<&PIO15 0	ALT2 IN		NICLK	0	CLK_A>;
-					 txer =		<&PIO15 1	ALT2 OUT 	SE_NICLK_IO	3000	CLK_A>;
-					 crs =		<&PIO15 2	ALT2 IN		BYPASS	1000>;
-					 col =		<&PIO15 3	ALT2 IN		BYPASS	1000>;
-					 rxdv =		<&PIO15 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rx_er =	<&PIO15 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-
-					 rxd0 =		<&PIO16 0	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd1 =		<&PIO16 1	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd2 =		<&PIO16 2	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd3 =		<&PIO16 3	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd4 =		<&PIO16 4	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd5 =		<&PIO16 5	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd6 =		<&PIO16 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd7 =		<&PIO16 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-
-					 rxclk =	<&PIO17 0	ALT2 IN	NICLK	0	CLK_A>;
-					 clk125 =	<&PIO17 6	ALT1 IN	NICLK	0	CLK_A>;
-                                         phyclk =       <&PIO13 5       ALT4 OUT NICLK   0       CLK_B>;
+					 mdint =	<&pio13 6	ALT2 IN		BYPASS	0>;
+					 mdio  =        <&pio15 4 	ALT2 OUT	BYPASS 	3000>;
+					 mdc   =        <&pio15 5 	ALT2 OUT    	NICLK  	0    	CLK_B>;
+					 txen =		<&pio13 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
+
+					 txd0 =		<&pio14 0	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
+					 txd1 =		<&pio14 1	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
+					 txd2 =		<&pio14 2	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd3 =		<&pio14 3	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd4 =		<&pio14 4	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd5 =		<&pio14 5	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd6 =		<&pio14 6	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd7 =		<&pio14 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+
+					 txclk =	<&pio15 0	ALT2 IN		NICLK	0	CLK_A>;
+					 txer =		<&pio15 1	ALT2 OUT 	SE_NICLK_IO	3000	CLK_A>;
+					 crs =		<&pio15 2	ALT2 IN		BYPASS	1000>;
+					 col =		<&pio15 3	ALT2 IN		BYPASS	1000>;
+					 rxdv =		<&pio15 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rx_er =	<&pio15 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+
+					 rxd0 =		<&pio16 0	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd1 =		<&pio16 1	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd2 =		<&pio16 2	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd3 =		<&pio16 3	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd4 =		<&pio16 4	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd5 =		<&pio16 5	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd6 =		<&pio16 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd7 =		<&pio16 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+
+					 rxclk =	<&pio17 0	ALT2 IN	NICLK	0	CLK_A>;
+					 clk125 =	<&pio17 6	ALT1 IN	NICLK	0	CLK_A>;
+                                         phyclk =       <&pio13 5       ALT4 OUT NICLK   0       CLK_B>;
 
 
 					};
@@ -442,7 +442,7 @@ 
 			interrupts-names = "irqmux";
 			ranges		= <0 0xfd6b0000 0x3000>;
 
-			PIO100: gpio@fd6b0000 {
+			pio100: gpio@fd6b0000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -450,7 +450,7 @@ 
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO100";
 			};
-			PIO101: gpio@fd6b1000 {
+			pio101: gpio@fd6b1000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -458,7 +458,7 @@ 
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO101";
 			};
-			PIO102: gpio@fd6b2000 {
+			pio102: gpio@fd6b2000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -479,7 +479,7 @@ 
 			interrupts-names = "irqmux";
 			ranges		= <0 0xfd330000 0x5000>;
 
-			PIO103: gpio@fd330000 {
+			pio103: gpio@fd330000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -487,7 +487,7 @@ 
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO103";
 			};
-			PIO104: gpio@fd331000 {
+			pio104: gpio@fd331000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -495,7 +495,7 @@ 
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO104";
 			};
-			PIO105: gpio@fd332000 {
+			pio105: gpio@fd332000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -503,7 +503,7 @@ 
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO105";
 			};
-			PIO106: gpio@fd333000 {
+			pio106: gpio@fd333000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -511,7 +511,7 @@ 
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO106";
 			};
-			PIO107: gpio@fd334000 {
+			pio107: gpio@fd334000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts
index ba0fa2c..d72e5c7 100644
--- a/arch/arm/boot/dts/stih416-b2020-revE.dts
+++ b/arch/arm/boot/dts/stih416-b2020-revE.dts
@@ -19,17 +19,17 @@ 
 			red {
 				#gpio-cells		= <1>;
 				label			= "Front Panel LED";
-				gpios			= <&PIO4 1>;
+				gpios			= <&pio4 1>;
 				linux,default-trigger	= "heartbeat";
 			};
 			green {
-				gpios			= <&PIO1 3>;
+				gpios			= <&pio1 3>;
 				default-state 		= "off";
 			};
 		};
 
 		ethernet1: dwmac@fef08000 {
-			snps,reset-gpio = <&PIO0 7>;
+			snps,reset-gpio = <&pio0 7>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 6252188..3e06d7f 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -12,36 +12,36 @@ 
 / {
 
 	aliases {
-		gpio0	= &PIO0;
-		gpio1	= &PIO1;
-		gpio2	= &PIO2;
-		gpio3	= &PIO3;
-		gpio4	= &PIO4;
-		gpio5	= &PIO40;
-		gpio6	= &PIO5;
-		gpio7	= &PIO6;
-		gpio8	= &PIO7;
-		gpio9	= &PIO8;
-		gpio10	= &PIO9;
-		gpio11	= &PIO10;
-		gpio12	= &PIO11;
-		gpio13	= &PIO12;
-		gpio14	= &PIO30;
-		gpio15	= &PIO31;
-		gpio16	= &PIO13;
-		gpio17	= &PIO14;
-		gpio18	= &PIO15;
-		gpio19	= &PIO16;
-		gpio20	= &PIO17;
-		gpio21	= &PIO18;
-		gpio22	= &PIO100;
-		gpio23	= &PIO101;
-		gpio24	= &PIO102;
-		gpio25	= &PIO103;
-		gpio26	= &PIO104;
-		gpio27	= &PIO105;
-		gpio28	= &PIO106;
-		gpio29	= &PIO107;
+		gpio0	= &pio0;
+		gpio1	= &pio1;
+		gpio2	= &pio2;
+		gpio3	= &pio3;
+		gpio4	= &pio4;
+		gpio5	= &pio40;
+		gpio6	= &pio5;
+		gpio7	= &pio6;
+		gpio8	= &pio7;
+		gpio9	= &pio8;
+		gpio10	= &pio9;
+		gpio11	= &pio10;
+		gpio12	= &pio11;
+		gpio13	= &pio12;
+		gpio14	= &pio30;
+		gpio15	= &pio31;
+		gpio16	= &pio13;
+		gpio17	= &pio14;
+		gpio18	= &pio15;
+		gpio19	= &pio16;
+		gpio20	= &pio17;
+		gpio21	= &pio18;
+		gpio22	= &pio100;
+		gpio23	= &pio101;
+		gpio24	= &pio102;
+		gpio25	= &pio103;
+		gpio26	= &pio104;
+		gpio27	= &pio105;
+		gpio28	= &pio106;
+		gpio29	= &pio107;
 	};
 
 	soc {
@@ -56,7 +56,7 @@ 
 			interrupts-names = "irqmux";
 			ranges		= <0 0xfe610000 0x6000>;
 
-			PIO0: gpio@fe610000 {
+			pio0: gpio@fe610000 {
 				gpio-controller;
 				#gpio-cells = <1>;
 				interrupt-controller;
@@ -64,7 +64,7 @@ 
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO0";
 			};
-			PIO1: gpio@fe611000 {
+			pio1: gpio@fe611000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -72,7 +72,7 @@ 
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO1";
 			};
-			PIO2: gpio@fe612000 {
+			pio2: gpio@fe612000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -80,7 +80,7 @@ 
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO2";
 			};
-			PIO3: gpio@fe613000 {
+			pio3: gpio@fe613000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -88,7 +88,7 @@ 
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO3";
 			};
-			PIO4: gpio@fe614000 {
+			pio4: gpio@fe614000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -96,7 +96,7 @@ 
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO4";
 			};
-			PIO40: gpio@fe615000 {
+			pio40: gpio@fe615000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -109,15 +109,15 @@ 
 			rc{
 				pinctrl_ir: ir0 {
 					st,pins {
-						ir = <&PIO4 0 ALT2 IN>;
+						ir = <&pio4 0 ALT2 IN>;
 					};
 				};
 			};
 			sbc_serial1 {
 				pinctrl_sbc_serial1: sbc_serial1 {
 					st,pins {
-						tx	= <&PIO2 6 ALT3 OUT>;
-						rx	= <&PIO2 7 ALT3 IN>;
+						tx	= <&pio2 6 ALT3 OUT>;
+						rx	= <&pio2 7 ALT3 IN>;
 					};
 				};
 			};
@@ -125,15 +125,15 @@ 
 			keyscan {
 				pinctrl_keyscan: keyscan {
 					st,pins {
-						keyin0 = <&PIO0 2 ALT2 IN>;
-						keyin1 = <&PIO0 3 ALT2 IN>;
-						keyin2 = <&PIO0 4 ALT2 IN>;
-						keyin3 = <&PIO2 6 ALT2 IN>;
-
-						keyout0 = <&PIO1 6 ALT2 OUT>;
-						keyout1 = <&PIO1 7 ALT2 OUT>;
-						keyout2 = <&PIO0 6 ALT2 OUT>;
-						keyout3 = <&PIO2 7 ALT2 OUT>;
+						keyin0 = <&pio0 2 ALT2 IN>;
+						keyin1 = <&pio0 3 ALT2 IN>;
+						keyin2 = <&pio0 4 ALT2 IN>;
+						keyin3 = <&pio2 6 ALT2 IN>;
+
+						keyout0 = <&pio1 6 ALT2 OUT>;
+						keyout1 = <&pio1 7 ALT2 OUT>;
+						keyout2 = <&pio0 6 ALT2 OUT>;
+						keyout3 = <&pio2 7 ALT2 OUT>;
 					};
 				};
 			};
@@ -141,8 +141,8 @@ 
 			sbc_i2c0 {
 				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
 					st,pins {
-						sda = <&PIO4 6 ALT1 BIDIR>;
-						scl = <&PIO4 5 ALT1 BIDIR>;
+						sda = <&pio4 6 ALT1 BIDIR>;
+						scl = <&pio4 5 ALT1 BIDIR>;
 					};
 				};
 			};
@@ -150,8 +150,8 @@ 
 			sbc_i2c1 {
 				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
 					st,pins {
-						sda = <&PIO3 2 ALT2 BIDIR>;
-						scl = <&PIO3 1 ALT2 BIDIR>;
+						sda = <&pio3 2 ALT2 BIDIR>;
+						scl = <&pio3 1 ALT2 BIDIR>;
 					};
 				};
 			};
@@ -159,51 +159,51 @@ 
 			gmac1 {
 				pinctrl_mii1: mii1 {
 					st,pins {
-						txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
-						col =   <&PIO0 7 ALT1 IN BYPASS 1000>;
-
-						mdio =  <&PIO1 0 ALT1 OUT BYPASS 1500>;
-						mdc =   <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
-						crs =   <&PIO1 2 ALT1 IN BYPASS 1000>;
-						mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
-						rxd0 =  <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd1 =  <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd2 =  <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd3 =  <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-
-						rxdv =  <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
-						phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						col =   <&pio0 7 ALT1 IN BYPASS 1000>;
+
+						mdio =  <&pio1 0 ALT1 OUT BYPASS 1500>;
+						mdc =   <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						crs =   <&pio1 2 ALT1 IN BYPASS 1000>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 =  <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 =  <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 =  <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 =  <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+						rxdv =  <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
 					};
 				};
 				pinctrl_rgmii1: rgmii1-0 {
 					st,pins {
-						txd0 =  <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>;
-						txd1 =  <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>;
-						txd2 =  <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>;
-						txd3 =  <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>;
-						txen =  <&PIO0 5 ALT1 OUT DE_IO 0   CLK_A>;
-						txclk = <&PIO0 6 ALT1 IN  NICLK 0   CLK_A>;
-
-						mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
-						mdc  = <&PIO1 1 ALT1 OUT NICLK  0 CLK_A>;
-						rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>;
-						rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>;
-						rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>;
-						rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>;
-
-						rxdv   = <&PIO2 0 ALT1 IN  DE_IO 500 CLK_A>;
-						rxclk  = <&PIO2 2 ALT1 IN  NICLK 0   CLK_A>;
-						phyclk = <&PIO2 3 ALT4 OUT NICLK 0   CLK_B>;
-
-						clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+						txd0 =  <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
+						txd1 =  <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
+						txd2 =  <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
+						txd3 =  <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
+						txen =  <&pio0 5 ALT1 OUT DE_IO 0   CLK_A>;
+						txclk = <&pio0 6 ALT1 IN  NICLK 0   CLK_A>;
+
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc  = <&pio1 1 ALT1 OUT NICLK  0 CLK_A>;
+						rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
+
+						rxdv   = <&pio2 0 ALT1 IN  DE_IO 500 CLK_A>;
+						rxclk  = <&pio2 2 ALT1 IN  NICLK 0   CLK_A>;
+						phyclk = <&pio2 3 ALT4 OUT NICLK 0   CLK_B>;
+
+						clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
 					};
 				};
 			};
@@ -220,7 +220,7 @@ 
 			interrupts-names = "irqmux";
 			ranges		= <0 0xfee00000 0x10000>;
 
-			PIO5: gpio@fee00000 {
+			pio5: gpio@fee00000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -228,7 +228,7 @@ 
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO5";
 			};
-			PIO6: gpio@fee01000 {
+			pio6: gpio@fee01000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -236,7 +236,7 @@ 
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO6";
 			};
-			PIO7: gpio@fee02000 {
+			pio7: gpio@fee02000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -244,7 +244,7 @@ 
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO7";
 			};
-			PIO8: gpio@fee03000 {
+			pio8: gpio@fee03000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -252,7 +252,7 @@ 
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO8";
 			};
-			PIO9: gpio@fee04000 {
+			pio9: gpio@fee04000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -260,7 +260,7 @@ 
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO9";
 			};
-			PIO10: gpio@fee05000 {
+			pio10: gpio@fee05000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -268,7 +268,7 @@ 
 				reg		= <0x5000 0x100>;
 				st,bank-name	= "PIO10";
 			};
-			PIO11: gpio@fee06000 {
+			pio11: gpio@fee06000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -276,7 +276,7 @@ 
 				reg		= <0x6000 0x100>;
 				st,bank-name	= "PIO11";
 			};
-			PIO12: gpio@fee07000 {
+			pio12: gpio@fee07000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -284,7 +284,7 @@ 
 				reg		= <0x7000 0x100>;
 				st,bank-name	= "PIO12";
 			};
-			PIO30: gpio@fee08000 {
+			pio30: gpio@fee08000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -292,7 +292,7 @@ 
 				reg		= <0x8000 0x100>;
 				st,bank-name	= "PIO30";
 			};
-			PIO31: gpio@fee09000 {
+			pio31: gpio@fee09000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -304,7 +304,7 @@ 
 			serial2-oe {
 				pinctrl_serial2_oe: serial2-1 {
 					st,pins {
-						output-enable	= <&PIO11 3 ALT2 OUT>;
+						output-enable	= <&pio11 3 ALT2 OUT>;
 					};
 				};
 			};
@@ -312,8 +312,8 @@ 
 			i2c0 {
 				pinctrl_i2c0_default: i2c0-default {
 					st,pins {
-						sda = <&PIO9 3 ALT1 BIDIR>;
-						scl = <&PIO9 2 ALT1 BIDIR>;
+						sda = <&pio9 3 ALT1 BIDIR>;
+						scl = <&pio9 2 ALT1 BIDIR>;
 					};
 				};
 			};
@@ -321,8 +321,8 @@ 
 			i2c1 {
 				pinctrl_i2c1_default: i2c1-default {
 					st,pins {
-						sda = <&PIO12 1 ALT1 BIDIR>;
-						scl = <&PIO12 0 ALT1 BIDIR>;
+						sda = <&pio12 1 ALT1 BIDIR>;
+						scl = <&pio12 0 ALT1 BIDIR>;
 					};
 				};
 			};
@@ -330,12 +330,12 @@ 
 			fsm {
 				pinctrl_fsm: fsm {
 					st,pins {
-						spi-fsm-clk  = <&PIO12 2 ALT1 OUT>;
-						spi-fsm-cs   = <&PIO12 3 ALT1 OUT>;
-						spi-fsm-mosi = <&PIO12 4 ALT1 OUT>;
-						spi-fsm-miso = <&PIO12 5 ALT1 IN>;
-						spi-fsm-hol  = <&PIO12 6 ALT1 OUT>;
-						spi-fsm-wp   = <&PIO12 7 ALT1 OUT>;
+						spi-fsm-clk  = <&pio12 2 ALT1 OUT>;
+						spi-fsm-cs   = <&pio12 3 ALT1 OUT>;
+						spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
+						spi-fsm-miso = <&pio12 5 ALT1 IN>;
+						spi-fsm-hol  = <&pio12 6 ALT1 OUT>;
+						spi-fsm-wp   = <&pio12 7 ALT1 OUT>;
 					};
 				};
 			};
@@ -352,7 +352,7 @@ 
 			interrupts-names = "irqmux";
 			ranges 		= <0 0xfe820000 0x6000>;
 
-			PIO13: gpio@fe820000 {
+			pio13: gpio@fe820000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -360,7 +360,7 @@ 
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO13";
 			};
-			PIO14: gpio@fe821000 {
+			pio14: gpio@fe821000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -368,7 +368,7 @@ 
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO14";
 			};
-			PIO15: gpio@fe822000 {
+			pio15: gpio@fe822000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -376,7 +376,7 @@ 
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO15";
 			};
-			PIO16: gpio@fe823000 {
+			pio16: gpio@fe823000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -384,7 +384,7 @@ 
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO16";
 			};
-			PIO17: gpio@fe824000 {
+			pio17: gpio@fe824000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -392,7 +392,7 @@ 
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO17";
 			};
-			PIO18: gpio@fe825000 {
+			pio18: gpio@fe825000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -405,8 +405,8 @@ 
 			serial2 {
 				pinctrl_serial2: serial2-0 {
 					st,pins {
-						tx	= <&PIO17 4 ALT2 OUT>;
-						rx	= <&PIO17 5 ALT2 IN>;
+						tx	= <&pio17 4 ALT2 OUT>;
+						rx	= <&pio17 5 ALT2 IN>;
 					};
 				};
 			};
@@ -414,28 +414,28 @@ 
 			gmac0 {
 				pinctrl_mii0: mii0 {
 					st,pins {
-						mdint = <&PIO13 6 ALT2 IN  BYPASS      0>;
-						txen =  <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd0 =  <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd1 =  <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd2 =  <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-						txd3 =  <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-
-						txclk = <&PIO15 0 ALT2 IN  NICLK       0 CLK_A>;
-						txer =  <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						crs = <&PIO15 2 ALT2 IN  BYPASS 1000>;
-						col = <&PIO15 3 ALT2 IN  BYPASS 1000>;
-						mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>;
-						mdc = <&PIO15 5 ALT2 OUT NICLK  0    CLK_B>;
-
-						rxd0 =  <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd1 =  <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd2 =  <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd3 =  <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxdv =  <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
-						phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>;
+						mdint = <&pio13 6 ALT2 IN  BYPASS      0>;
+						txen =  <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						txd0 =  <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 =  <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 =  <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+						txd3 =  <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+
+						txclk = <&pio15 0 ALT2 IN  NICLK       0 CLK_A>;
+						txer =  <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						crs = <&pio15 2 ALT2 IN  BYPASS 1000>;
+						col = <&pio15 3 ALT2 IN  BYPASS 1000>;
+						mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
+						mdc = <&pio15 5 ALT2 OUT NICLK  0    CLK_B>;
+
+						rxd0 =  <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 =  <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 =  <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 =  <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxdv =  <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+						phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
 					};
 				};
 
@@ -445,25 +445,25 @@ 
 				};
 				pinctrl_rgmii0: rgmii0 {
 					st,pins {
-						 phyclk = <&PIO13  5 ALT4 OUT NICLK 0 CLK_B>;
-						 txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>;
-						 txd0  = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>;
-						 txd1  = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>;
-						 txd2  = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>;
-						 txd3  = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>;
-						 txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
-
-						 mdio = <&PIO15 4 ALT2 OUT BYPASS 0>;
-						 mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
-
-						 rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>;
-						 rxd0 =<&PIO16 0 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd1 =<&PIO16 1 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd2 =<&PIO16 2 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd3  =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>;
-						 rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
-
-						 clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
+						 phyclk = <&pio13  5 ALT4 OUT NICLK 0 CLK_B>;
+						 txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
+						 txd0  = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
+						 txd1  = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
+						 txd2  = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
+						 txd3  = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
+						 txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+
+						 mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
+						 mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+						 rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
+						 rxd0 =<&pio16 0 ALT2 IN DE_IO	500 CLK_A>;
+						 rxd1 =<&pio16 1 ALT2 IN DE_IO	500 CLK_A>;
+						 rxd2 =<&pio16 2 ALT2 IN DE_IO	500 CLK_A>;
+						 rxd3  =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
+						 rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+
+						 clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
 					};
 				};
 			};
@@ -480,7 +480,7 @@ 
 			interrupts-names = "irqmux";
 			ranges		= <0 0xfd6b0000 0x3000>;
 
-			PIO100: gpio@fd6b0000 {
+			pio100: gpio@fd6b0000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -488,7 +488,7 @@ 
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO100";
 			};
-			PIO101: gpio@fd6b1000 {
+			pio101: gpio@fd6b1000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -496,7 +496,7 @@ 
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO101";
 			};
-			PIO102: gpio@fd6b2000 {
+			pio102: gpio@fd6b2000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -517,7 +517,7 @@ 
 			interrupts-names = "irqmux";
 			ranges			= <0 0xfd330000 0x5000>;
 
-			PIO103: gpio@fd330000 {
+			pio103: gpio@fd330000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -525,7 +525,7 @@ 
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO103";
 			};
-			PIO104: gpio@fd331000 {
+			pio104: gpio@fd331000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -533,7 +533,7 @@ 
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO104";
 			};
-			PIO105: gpio@fd332000 {
+			pio105: gpio@fd332000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -541,7 +541,7 @@ 
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO105";
 			};
-			PIO106: gpio@fd333000 {
+			pio106: gpio@fd333000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
@@ -550,7 +550,7 @@ 
 				st,bank-name	= "PIO106";
 			};
 
-			PIO107: gpio@fd334000 {
+			pio107: gpio@fd334000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
index b3dd6ca..5f91f45 100644
--- a/arch/arm/boot/dts/stih41x-b2000.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
@@ -35,7 +35,7 @@ 
 			fp_led {
 				#gpio-cells = <1>;
 				label	= "Front Panel LED";
-				gpios	= <&PIO105 7>;
+				gpios	= <&pio105 7>;
 				linux,default-trigger	= "heartbeat";
 			};
 		};
@@ -55,7 +55,7 @@ 
 			phy-mode		= "mii";
 			pinctrl-0		= <&pinctrl_mii0>;
 
-			snps,reset-gpio 	= <&PIO106 2>;
+			snps,reset-gpio 	= <&pio106 2>;
 			snps,reset-active-low;
 			snps,reset-delays-us 	= <0 10000 10000>;
 		};
@@ -65,7 +65,7 @@ 
 			phy-mode		= "mii";
 			st,tx-retime-src	= "txclk";
 
-			snps,reset-gpio 	= <&PIO4 7>;
+			snps,reset-gpio 	= <&pio4 7>;
 			snps,reset-active-low;
 			snps,reset-delays-us 	= <0 10000 10000>;
 		};
diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
index d8a8429..c0f50e9 100644
--- a/arch/arm/boot/dts/stih41x-b2020.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
@@ -32,11 +32,11 @@ 
 			red {
 				#gpio-cells = <1>;
 				label	= "Front Panel LED";
-				gpios	= <&PIO4 1>;
+				gpios	= <&pio4 1>;
 				linux,default-trigger	= "heartbeat";
 			};
 			green {
-				gpios	= <&PIO4 7>;
+				gpios	= <&pio4 7>;
 				default-state = "off";
 			};
 		};
@@ -68,7 +68,7 @@ 
 			phy-mode		= "rgmii-id";
 			max-speed		= <1000>;
 			st,tx-retime-src	= "clk_125";
-			snps,reset-gpio 	= <&PIO3 0>;
+			snps,reset-gpio 	= <&pio3 0>;
 			snps,reset-active-low;
 			snps,reset-delays-us 	= <0 10000 10000>;