| Message ID | 1403264094-16140-1-git-send-email-maxime.coquelin@st.com |
|---|---|
| State | Accepted |
| Commit | 7a2deccf0ef12f7f6e33150d5875020c0c94fa94 |
| Headers | show |
On 20/06/14 12:34, Maxime COQUELIN wrote: > st_gpio_irqmux_handler() reads the status register to find out > which banks inside the controller have pending IRQs. > For each banks having pending IRQs, it calls the corresponding handler. > > Problem is that current code restricts the number of possible banks inside the > controller to ST_GPIO_PINS_PER_BANK. This define represents the number of pins > inside a bank, so it shouldn't be used here. You are right. Good find. Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > > On STiH407, PIO_FRONT0 controller has 10 banks, so IRQs pending in the two > last banks (PIO18 & PIO19) aren't handled. > > This patch replace ST_GPIO_PINS_PER_BANK by the number of banks inside the > controller. > > Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: <stable@vger.kernel.org> #v3.15+ > Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> > --- > drivers/pinctrl/pinctrl-st.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c > index 1bd6363bc9..9f43916 100644 > --- a/drivers/pinctrl/pinctrl-st.c > +++ b/drivers/pinctrl/pinctrl-st.c > @@ -1431,7 +1431,7 @@ static void st_gpio_irqmux_handler(unsigned irq, struct irq_desc *desc) > > status = readl(info->irqmux_base); > > - for_each_set_bit(n, &status, ST_GPIO_PINS_PER_BANK) > + for_each_set_bit(n, &status, info->nbanks) > __gpio_irq_handler(&info->banks[n]); > > chained_irq_exit(chip, desc); > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
On Fri, Jun 20, 2014 at 1:34 PM, Maxime COQUELIN <maxime.coquelin@st.com> wrote: > st_gpio_irqmux_handler() reads the status register to find out > which banks inside the controller have pending IRQs. > For each banks having pending IRQs, it calls the corresponding handler. > > Problem is that current code restricts the number of possible banks inside the > controller to ST_GPIO_PINS_PER_BANK. This define represents the number of pins > inside a bank, so it shouldn't be used here. > > On STiH407, PIO_FRONT0 controller has 10 banks, so IRQs pending in the two > last banks (PIO18 & PIO19) aren't handled. > > This patch replace ST_GPIO_PINS_PER_BANK by the number of banks inside the > controller. > > Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: <stable@vger.kernel.org> #v3.15+ > Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Patch applied for fixes with Srinivas ACK. Thanks! Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c index 1bd6363bc9..9f43916 100644 --- a/drivers/pinctrl/pinctrl-st.c +++ b/drivers/pinctrl/pinctrl-st.c @@ -1431,7 +1431,7 @@ static void st_gpio_irqmux_handler(unsigned irq, struct irq_desc *desc) status = readl(info->irqmux_base); - for_each_set_bit(n, &status, ST_GPIO_PINS_PER_BANK) + for_each_set_bit(n, &status, info->nbanks) __gpio_irq_handler(&info->banks[n]); chained_irq_exit(chip, desc);
st_gpio_irqmux_handler() reads the status register to find out which banks inside the controller have pending IRQs. For each banks having pending IRQs, it calls the corresponding handler. Problem is that current code restricts the number of possible banks inside the controller to ST_GPIO_PINS_PER_BANK. This define represents the number of pins inside a bank, so it shouldn't be used here. On STiH407, PIO_FRONT0 controller has 10 banks, so IRQs pending in the two last banks (PIO18 & PIO19) aren't handled. This patch replace ST_GPIO_PINS_PER_BANK by the number of banks inside the controller. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> #v3.15+ Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> --- drivers/pinctrl/pinctrl-st.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)