diff mbox

[2/2] ARM: vexpress: Remove non-DT code

Message ID 1410359618-3441-2-git-send-email-pawel.moll@arm.com
State New
Headers show

Commit Message

Pawel Moll Sept. 10, 2014, 2:33 p.m. UTC
Now, with the CLCD DT support available, there is no
more reason to keep the non-DT support for V2P-CA9.

Removed, together with "some" supporting code. It was
necessary to make PLAT_VERSATILE_SCHED_CLOCK optional
and selected by the machines still interested in it.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
---
 arch/arm/Kconfig                                  |   2 +
 arch/arm/mach-vexpress/Kconfig                    |   3 -
 arch/arm/mach-vexpress/Makefile                   |   3 +-
 arch/arm/mach-vexpress/core.h                     |   7 -
 arch/arm/mach-vexpress/ct-ca9x4.c                 | 212 ------------
 arch/arm/mach-vexpress/include/mach/ct-ca9x4.h    |  47 ---
 arch/arm/mach-vexpress/include/mach/hardware.h    |   1 -
 arch/arm/mach-vexpress/include/mach/irqs.h        |   6 -
 arch/arm/mach-vexpress/include/mach/motherboard.h |  88 -----
 arch/arm/mach-vexpress/platsmp.c                  |  42 ---
 arch/arm/mach-vexpress/v2m.c                      | 374 ----------------------
 arch/arm/plat-versatile/Kconfig                   |   2 +-
 drivers/clk/versatile/Makefile                    |   1 -
 drivers/clk/versatile/clk-vexpress-osc.c          |   7 -
 drivers/clk/versatile/clk-vexpress.c              |  86 -----
 drivers/mfd/vexpress-sysreg.c                     |  71 +---
 drivers/misc/vexpress-syscfg.c                    |  60 +---
 drivers/power/reset/vexpress-poweroff.c           |  17 +-
 include/linux/vexpress.h                          |  19 --
 19 files changed, 35 insertions(+), 1013 deletions(-)
 delete mode 100644 arch/arm/mach-vexpress/ct-ca9x4.c
 delete mode 100644 arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
 delete mode 100644 arch/arm/mach-vexpress/include/mach/hardware.h
 delete mode 100644 arch/arm/mach-vexpress/include/mach/irqs.h
 delete mode 100644 arch/arm/mach-vexpress/include/mach/motherboard.h
 delete mode 100644 drivers/clk/versatile/clk-vexpress.c

Comments

Russell King - ARM Linux Sept. 10, 2014, 2:58 p.m. UTC | #1
On Wed, Sep 10, 2014 at 03:33:38PM +0100, Pawel Moll wrote:
> Now, with the CLCD DT support available, there is no
> more reason to keep the non-DT support for V2P-CA9.
> 
> Removed, together with "some" supporting code. It was
> necessary to make PLAT_VERSATILE_SCHED_CLOCK optional
> and selected by the machines still interested in it.

So, I'll then be asking ARM to provide updated instructions on how to
boot the CT9x4 with DT... or I'll simply take it out of the nightly
build and boot system when this patch hits mainline and stop all
testing of it.
Pawel Moll Sept. 10, 2014, 3:40 p.m. UTC | #2
On Wed, 2014-09-10 at 15:58 +0100, Russell King - ARM Linux wrote:
> So, I'll then be asking ARM to provide updated instructions on how to
> boot the CT9x4 with DT... 

The same version (although different build) of the Boot Monitor you have
got for CA15_A7 (a.k.a. TC2) is able to boot CA9x4 with DT. It has got
the same limitations though, namely no TFTP support, if this is your
main concern (there is no ARM-provided uboot for TC2 either).

If you are willing to perform firmware upgrade on the A9 tile, I'm happy
to help you with this.

Pawel
Mike Turquette Sept. 10, 2014, 5:45 p.m. UTC | #3
Quoting Pawel Moll (2014-09-10 07:33:38)
> Now, with the CLCD DT support available, there is no
> more reason to keep the non-DT support for V2P-CA9.
> 
> Removed, together with "some" supporting code. It was
> necessary to make PLAT_VERSATILE_SCHED_CLOCK optional
> and selected by the machines still interested in it.
> 
> Signed-off-by: Pawel Moll <pawel.moll@arm.com>

For clock driver parts:

Acked-by: Mike Turquette <mturquette@linaro.org>

> ---
>  arch/arm/Kconfig                                  |   2 +
>  arch/arm/mach-vexpress/Kconfig                    |   3 -
>  arch/arm/mach-vexpress/Makefile                   |   3 +-
>  arch/arm/mach-vexpress/core.h                     |   7 -
>  arch/arm/mach-vexpress/ct-ca9x4.c                 | 212 ------------
>  arch/arm/mach-vexpress/include/mach/ct-ca9x4.h    |  47 ---
>  arch/arm/mach-vexpress/include/mach/hardware.h    |   1 -
>  arch/arm/mach-vexpress/include/mach/irqs.h        |   6 -
>  arch/arm/mach-vexpress/include/mach/motherboard.h |  88 -----
>  arch/arm/mach-vexpress/platsmp.c                  |  42 ---
>  arch/arm/mach-vexpress/v2m.c                      | 374 ----------------------
>  arch/arm/plat-versatile/Kconfig                   |   2 +-
>  drivers/clk/versatile/Makefile                    |   1 -
>  drivers/clk/versatile/clk-vexpress-osc.c          |   7 -
>  drivers/clk/versatile/clk-vexpress.c              |  86 -----
>  drivers/mfd/vexpress-sysreg.c                     |  71 +---
>  drivers/misc/vexpress-syscfg.c                    |  60 +---
>  drivers/power/reset/vexpress-poweroff.c           |  17 +-
>  include/linux/vexpress.h                          |  19 --
>  19 files changed, 35 insertions(+), 1013 deletions(-)
>  delete mode 100644 arch/arm/mach-vexpress/ct-ca9x4.c
>  delete mode 100644 arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
>  delete mode 100644 arch/arm/mach-vexpress/include/mach/hardware.h
>  delete mode 100644 arch/arm/mach-vexpress/include/mach/irqs.h
>  delete mode 100644 arch/arm/mach-vexpress/include/mach/motherboard.h
>  delete mode 100644 drivers/clk/versatile/clk-vexpress.c
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 32cbbd5..32d5b2f 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -347,6 +347,7 @@ config ARCH_REALVIEW
>         select ICST
>         select NEED_MACH_MEMORY_H
>         select PLAT_VERSATILE
> +       select PLAT_VERSATILE_SCHED_CLOCK
>         help
>           This enables support for ARM Ltd RealView boards.
>  
> @@ -362,6 +363,7 @@ config ARCH_VERSATILE
>         select ICST
>         select PLAT_VERSATILE
>         select PLAT_VERSATILE_CLOCK
> +       select PLAT_VERSATILE_SCHED_CLOCK
>         select VERSATILE_FPGA_IRQ
>         help
>           This enables support for ARM Ltd Versatile board.
> diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
> index b2cfba16c..9a96bab 100644
> --- a/arch/arm/mach-vexpress/Kconfig
> +++ b/arch/arm/mach-vexpress/Kconfig
> @@ -49,9 +49,6 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
>           build a working kernel, you must also enable relevant core
>           tile support or Flattened Device Tree based support options.
>  
> -config ARCH_VEXPRESS_CA9X4
> -       bool "Versatile Express Cortex-A9x4 tile"
> -
>  config ARCH_VEXPRESS_DCSCB
>         bool "Dual Cluster System Control Block (DCSCB) support"
>         depends on MCPM
> diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
> index fc649bc..f5c1006 100644
> --- a/arch/arm/mach-vexpress/Makefile
> +++ b/arch/arm/mach-vexpress/Makefile
> @@ -1,11 +1,10 @@
>  #
>  # Makefile for the linux kernel.
>  #
> -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
> +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := \
>         -I$(srctree)/arch/arm/plat-versatile/include
>  
>  obj-y                                  := v2m.o
> -obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)      += ct-ca9x4.o
>  obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)      += dcscb.o      dcscb_setup.o
>  CFLAGS_dcscb.o                         += -march=armv7-a
>  CFLAGS_REMOVE_dcscb.o                  = -pg
> diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
> index 152fad9..2a11d3a 100644
> --- a/arch/arm/mach-vexpress/core.h
> +++ b/arch/arm/mach-vexpress/core.h
> @@ -1,12 +1,5 @@
> -/* 2MB large area for motherboard's peripherals static mapping */
> -#define V2M_PERIPH 0xf8000000
> -
> -/* Tile's peripherals static mappings should start here */
> -#define V2T_PERIPH 0xf8200000
> -
>  bool vexpress_smp_init_ops(void);
>  
> -extern struct smp_operations   vexpress_smp_ops;
>  extern struct smp_operations   vexpress_smp_dt_ops;
>  
>  extern void vexpress_cpu_die(unsigned int cpu);
> diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
> deleted file mode 100644
> index 27bea04..0000000
> --- a/arch/arm/mach-vexpress/ct-ca9x4.c
> +++ /dev/null
> @@ -1,212 +0,0 @@
> -/*
> - * Versatile Express Core Tile Cortex A9x4 Support
> - */
> -#include <linux/init.h>
> -#include <linux/gfp.h>
> -#include <linux/device.h>
> -#include <linux/dma-mapping.h>
> -#include <linux/platform_device.h>
> -#include <linux/amba/bus.h>
> -#include <linux/amba/clcd.h>
> -#include <linux/platform_data/video-clcd-versatile.h>
> -#include <linux/clkdev.h>
> -#include <linux/vexpress.h>
> -#include <linux/irqchip/arm-gic.h>
> -
> -#include <asm/hardware/arm_timer.h>
> -#include <asm/hardware/cache-l2x0.h>
> -#include <asm/smp_scu.h>
> -#include <asm/smp_twd.h>
> -
> -#include <mach/ct-ca9x4.h>
> -
> -#include <asm/hardware/timer-sp.h>
> -
> -#include <asm/mach/map.h>
> -#include <asm/mach/time.h>
> -
> -#include "core.h"
> -
> -#include <mach/motherboard.h>
> -#include <mach/irqs.h>
> -
> -static struct map_desc ct_ca9x4_io_desc[] __initdata = {
> -       {
> -               .virtual        = V2T_PERIPH,
> -               .pfn            = __phys_to_pfn(CT_CA9X4_MPIC),
> -               .length         = SZ_8K,
> -               .type           = MT_DEVICE,
> -       },
> -};
> -
> -static void __init ct_ca9x4_map_io(void)
> -{
> -       iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
> -}
> -
> -static void __init ca9x4_l2_init(void)
> -{
> -#ifdef CONFIG_CACHE_L2X0
> -       void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
> -
> -       if (l2x0_base) {
> -               /* set RAM latencies to 1 cycle for this core tile. */
> -               writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
> -               writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
> -
> -               l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
> -       } else {
> -               pr_err("L2C: unable to map L2 cache controller\n");
> -       }
> -#endif
> -}
> -
> -#ifdef CONFIG_HAVE_ARM_TWD
> -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER);
> -
> -static void __init ca9x4_twd_init(void)
> -{
> -       int err = twd_local_timer_register(&twd_local_timer);
> -       if (err)
> -               pr_err("twd_local_timer_register failed %d\n", err);
> -}
> -#else
> -#define ca9x4_twd_init()       do {} while(0)
> -#endif
> -
> -static void __init ct_ca9x4_init_irq(void)
> -{
> -       gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
> -                ioremap(A9_MPCORE_GIC_CPU, SZ_256));
> -       ca9x4_twd_init();
> -       ca9x4_l2_init();
> -}
> -
> -static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
> -{
> -       unsigned long framesize = 1024 * 768 * 2;
> -
> -       fb->panel = versatile_clcd_get_panel("XVGA");
> -       if (!fb->panel)
> -               return -EINVAL;
> -
> -       return versatile_clcd_setup_dma(fb, framesize);
> -}
> -
> -static struct clcd_board ct_ca9x4_clcd_data = {
> -       .name           = "CT-CA9X4",
> -       .caps           = CLCD_CAP_5551 | CLCD_CAP_565,
> -       .check          = clcdfb_check,
> -       .decode         = clcdfb_decode,
> -       .setup          = ct_ca9x4_clcd_setup,
> -       .mmap           = versatile_clcd_mmap_dma,
> -       .remove         = versatile_clcd_remove_dma,
> -};
> -
> -static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
> -static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
> -static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
> -static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
> -
> -static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
> -       &clcd_device,
> -       &dmc_device,
> -       &smc_device,
> -       &gpio_device,
> -};
> -
> -static struct resource pmu_resources[] = {
> -       [0] = {
> -               .start  = IRQ_CT_CA9X4_PMU_CPU0,
> -               .end    = IRQ_CT_CA9X4_PMU_CPU0,
> -               .flags  = IORESOURCE_IRQ,
> -       },
> -       [1] = {
> -               .start  = IRQ_CT_CA9X4_PMU_CPU1,
> -               .end    = IRQ_CT_CA9X4_PMU_CPU1,
> -               .flags  = IORESOURCE_IRQ,
> -       },
> -       [2] = {
> -               .start  = IRQ_CT_CA9X4_PMU_CPU2,
> -               .end    = IRQ_CT_CA9X4_PMU_CPU2,
> -               .flags  = IORESOURCE_IRQ,
> -       },
> -       [3] = {
> -               .start  = IRQ_CT_CA9X4_PMU_CPU3,
> -               .end    = IRQ_CT_CA9X4_PMU_CPU3,
> -               .flags  = IORESOURCE_IRQ,
> -       },
> -};
> -
> -static struct platform_device pmu_device = {
> -       .name           = "arm-pmu",
> -       .id             = -1,
> -       .num_resources  = ARRAY_SIZE(pmu_resources),
> -       .resource       = pmu_resources,
> -};
> -
> -static struct clk_lookup osc1_lookup = {
> -       .dev_id         = "ct:clcd",
> -};
> -
> -static struct platform_device osc1_device = {
> -       .name           = "vexpress-osc",
> -       .id             = 1,
> -       .num_resources  = 1,
> -       .resource       = (struct resource []) {
> -               VEXPRESS_RES_FUNC(0xf, 1),
> -       },
> -       .dev.platform_data = &osc1_lookup,
> -};
> -
> -static void __init ct_ca9x4_init(void)
> -{
> -       int i;
> -
> -       for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
> -               amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
> -
> -       platform_device_register(&pmu_device);
> -       vexpress_syscfg_device_register(&osc1_device);
> -}
> -
> -#ifdef CONFIG_SMP
> -static void *ct_ca9x4_scu_base __initdata;
> -
> -static void __init ct_ca9x4_init_cpu_map(void)
> -{
> -       int i, ncores;
> -
> -       ct_ca9x4_scu_base = ioremap(A9_MPCORE_SCU, SZ_128);
> -       if (WARN_ON(!ct_ca9x4_scu_base))
> -               return;
> -
> -       ncores = scu_get_core_count(ct_ca9x4_scu_base);
> -
> -       if (ncores > nr_cpu_ids) {
> -               pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
> -                       ncores, nr_cpu_ids);
> -               ncores = nr_cpu_ids;
> -       }
> -
> -       for (i = 0; i < ncores; ++i)
> -               set_cpu_possible(i, true);
> -}
> -
> -static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
> -{
> -       scu_enable(ct_ca9x4_scu_base);
> -}
> -#endif
> -
> -struct ct_desc ct_ca9x4_desc __initdata = {
> -       .id             = V2M_CT_ID_CA9,
> -       .name           = "CA9x4",
> -       .map_io         = ct_ca9x4_map_io,
> -       .init_irq       = ct_ca9x4_init_irq,
> -       .init_tile      = ct_ca9x4_init,
> -#ifdef CONFIG_SMP
> -       .init_cpu_map   = ct_ca9x4_init_cpu_map,
> -       .smp_enable     = ct_ca9x4_smp_enable,
> -#endif
> -};
> diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
> deleted file mode 100644
> index 84acf84..0000000
> --- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
> +++ /dev/null
> @@ -1,47 +0,0 @@
> -#ifndef __MACH_CT_CA9X4_H
> -#define __MACH_CT_CA9X4_H
> -
> -/*
> - * Physical base addresses
> - */
> -#define CT_CA9X4_CLCDC         (0x10020000)
> -#define CT_CA9X4_AXIRAM                (0x10060000)
> -#define CT_CA9X4_DMC           (0x100e0000)
> -#define CT_CA9X4_SMC           (0x100e1000)
> -#define CT_CA9X4_SCC           (0x100e2000)
> -#define CT_CA9X4_SP804_TIMER   (0x100e4000)
> -#define CT_CA9X4_SP805_WDT     (0x100e5000)
> -#define CT_CA9X4_TZPC          (0x100e6000)
> -#define CT_CA9X4_GPIO          (0x100e8000)
> -#define CT_CA9X4_FASTAXI       (0x100e9000)
> -#define CT_CA9X4_SLOWAXI       (0x100ea000)
> -#define CT_CA9X4_TZASC         (0x100ec000)
> -#define CT_CA9X4_CORESIGHT     (0x10200000)
> -#define CT_CA9X4_MPIC          (0x1e000000)
> -#define CT_CA9X4_SYSTIMER      (0x1e004000)
> -#define CT_CA9X4_SYSWDT                (0x1e007000)
> -#define CT_CA9X4_L2CC          (0x1e00a000)
> -
> -#define A9_MPCORE_SCU          (CT_CA9X4_MPIC + 0x0000)
> -#define A9_MPCORE_GIC_CPU      (CT_CA9X4_MPIC + 0x0100)
> -#define A9_MPCORE_GIT          (CT_CA9X4_MPIC + 0x0200)
> -#define A9_MPCORE_TWD          (CT_CA9X4_MPIC + 0x0600)
> -#define A9_MPCORE_GIC_DIST     (CT_CA9X4_MPIC + 0x1000)
> -
> -/*
> - * Interrupts.  Those in {} are for AMBA devices
> - */
> -#define IRQ_CT_CA9X4_CLCDC     { 76 }
> -#define IRQ_CT_CA9X4_DMC       { 0 }
> -#define IRQ_CT_CA9X4_SMC       { 77, 78 }
> -#define IRQ_CT_CA9X4_TIMER0    80
> -#define IRQ_CT_CA9X4_TIMER1    81
> -#define IRQ_CT_CA9X4_GPIO      { 82 }
> -#define IRQ_CT_CA9X4_PMU_CPU0  92
> -#define IRQ_CT_CA9X4_PMU_CPU1  93
> -#define IRQ_CT_CA9X4_PMU_CPU2  94
> -#define IRQ_CT_CA9X4_PMU_CPU3  95
> -
> -extern struct ct_desc ct_ca9x4_desc;
> -
> -#endif
> diff --git a/arch/arm/mach-vexpress/include/mach/hardware.h b/arch/arm/mach-vexpress/include/mach/hardware.h
> deleted file mode 100644
> index 40a8c17..0000000
> --- a/arch/arm/mach-vexpress/include/mach/hardware.h
> +++ /dev/null
> @@ -1 +0,0 @@
> -/* empty */
> diff --git a/arch/arm/mach-vexpress/include/mach/irqs.h b/arch/arm/mach-vexpress/include/mach/irqs.h
> deleted file mode 100644
> index f8f7f78..0000000
> --- a/arch/arm/mach-vexpress/include/mach/irqs.h
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -#define IRQ_LOCALTIMER         29
> -#define IRQ_LOCALWDOG          30
> -
> -#ifndef CONFIG_SPARSE_IRQ
> -#define NR_IRQS        256
> -#endif
> diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h
> deleted file mode 100644
> index 68abc8b..0000000
> --- a/arch/arm/mach-vexpress/include/mach/motherboard.h
> +++ /dev/null
> @@ -1,88 +0,0 @@
> -#ifndef __MACH_MOTHERBOARD_H
> -#define __MACH_MOTHERBOARD_H
> -
> -/*
> - * Physical addresses, offset from V2M_PA_CS0-3
> - */
> -#define V2M_NOR0               (V2M_PA_CS0)
> -#define V2M_NOR1               (V2M_PA_CS1)
> -#define V2M_SRAM               (V2M_PA_CS2)
> -#define V2M_VIDEO_SRAM         (V2M_PA_CS3 + 0x00000000)
> -#define V2M_LAN9118            (V2M_PA_CS3 + 0x02000000)
> -#define V2M_ISP1761            (V2M_PA_CS3 + 0x03000000)
> -
> -/*
> - * Physical addresses, offset from V2M_PA_CS7
> - */
> -#define V2M_SYSREGS            (V2M_PA_CS7 + 0x00000000)
> -#define V2M_SYSCTL             (V2M_PA_CS7 + 0x00001000)
> -#define V2M_SERIAL_BUS_PCI     (V2M_PA_CS7 + 0x00002000)
> -
> -#define V2M_AACI               (V2M_PA_CS7 + 0x00004000)
> -#define V2M_MMCI               (V2M_PA_CS7 + 0x00005000)
> -#define V2M_KMI0               (V2M_PA_CS7 + 0x00006000)
> -#define V2M_KMI1               (V2M_PA_CS7 + 0x00007000)
> -
> -#define V2M_UART0              (V2M_PA_CS7 + 0x00009000)
> -#define V2M_UART1              (V2M_PA_CS7 + 0x0000a000)
> -#define V2M_UART2              (V2M_PA_CS7 + 0x0000b000)
> -#define V2M_UART3              (V2M_PA_CS7 + 0x0000c000)
> -
> -#define V2M_WDT                        (V2M_PA_CS7 + 0x0000f000)
> -
> -#define V2M_TIMER01            (V2M_PA_CS7 + 0x00011000)
> -#define V2M_TIMER23            (V2M_PA_CS7 + 0x00012000)
> -
> -#define V2M_SERIAL_BUS_DVI     (V2M_PA_CS7 + 0x00016000)
> -#define V2M_RTC                        (V2M_PA_CS7 + 0x00017000)
> -
> -#define V2M_CF                 (V2M_PA_CS7 + 0x0001a000)
> -#define V2M_CLCD               (V2M_PA_CS7 + 0x0001f000)
> -
> -
> -/*
> - * Interrupts.  Those in {} are for AMBA devices
> - */
> -#define IRQ_V2M_WDT            { (32 + 0) }
> -#define IRQ_V2M_TIMER0         (32 + 2)
> -#define IRQ_V2M_TIMER1         (32 + 2)
> -#define IRQ_V2M_TIMER2         (32 + 3)
> -#define IRQ_V2M_TIMER3         (32 + 3)
> -#define IRQ_V2M_RTC            { (32 + 4) }
> -#define IRQ_V2M_UART0          { (32 + 5) }
> -#define IRQ_V2M_UART1          { (32 + 6) }
> -#define IRQ_V2M_UART2          { (32 + 7) }
> -#define IRQ_V2M_UART3          { (32 + 8) }
> -#define IRQ_V2M_MMCI           { (32 + 9), (32 + 10) }
> -#define IRQ_V2M_AACI           { (32 + 11) }
> -#define IRQ_V2M_KMI0           { (32 + 12) }
> -#define IRQ_V2M_KMI1           { (32 + 13) }
> -#define IRQ_V2M_CLCD           { (32 + 14) }
> -#define IRQ_V2M_LAN9118                (32 + 15)
> -#define IRQ_V2M_ISP1761                (32 + 16)
> -#define IRQ_V2M_PCIE           (32 + 17)
> -
> -
> -/*
> - * Core tile IDs
> - */
> -#define V2M_CT_ID_CA9          0x0c000191
> -#define V2M_CT_ID_UNSUPPORTED  0xff000191
> -#define V2M_CT_ID_MASK         0xff000fff
> -
> -struct ct_desc {
> -       u32                     id;
> -       const char              *name;
> -       void                    (*map_io)(void);
> -       void                    (*init_early)(void);
> -       void                    (*init_irq)(void);
> -       void                    (*init_tile)(void);
> -#ifdef CONFIG_SMP
> -       void                    (*init_cpu_map)(void);
> -       void                    (*smp_enable)(unsigned int);
> -#endif
> -};
> -
> -extern struct ct_desc *ct_desc;
> -
> -#endif
> diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
> index a1f3804..83188cf 100644
> --- a/arch/arm/mach-vexpress/platsmp.c
> +++ b/arch/arm/mach-vexpress/platsmp.c
> @@ -19,48 +19,10 @@
>  #include <asm/smp_scu.h>
>  #include <asm/mach/map.h>
>  
> -#include <mach/motherboard.h>
> -
>  #include <plat/platsmp.h>
>  
>  #include "core.h"
>  
> -/*
> - * Initialise the CPU possible map early - this describes the CPUs
> - * which may be present or become present in the system.
> - */
> -static void __init vexpress_smp_init_cpus(void)
> -{
> -       ct_desc->init_cpu_map();
> -}
> -
> -static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
> -{
> -       /*
> -        * Initialise the present map, which describes the set of CPUs
> -        * actually populated at the present time.
> -        */
> -       ct_desc->smp_enable(max_cpus);
> -
> -       /*
> -        * Write the address of secondary startup into the
> -        * system-wide flags register. The boot monitor waits
> -        * until it receives a soft interrupt, and then the
> -        * secondary CPU branches to this address.
> -        */
> -       vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
> -}
> -
> -struct smp_operations __initdata vexpress_smp_ops = {
> -       .smp_init_cpus          = vexpress_smp_init_cpus,
> -       .smp_prepare_cpus       = vexpress_smp_prepare_cpus,
> -       .smp_secondary_init     = versatile_secondary_init,
> -       .smp_boot_secondary     = versatile_boot_secondary,
> -#ifdef CONFIG_HOTPLUG_CPU
> -       .cpu_die                = vexpress_cpu_die,
> -#endif
> -};
> -
>  bool __init vexpress_smp_init_ops(void)
>  {
>  #ifdef CONFIG_MCPM
> @@ -79,8 +41,6 @@ bool __init vexpress_smp_init_ops(void)
>         return false;
>  }
>  
> -#if defined(CONFIG_OF)
> -
>  static const struct of_device_id vexpress_smp_dt_scu_match[] __initconst = {
>         { .compatible = "arm,cortex-a5-scu", },
>         { .compatible = "arm,cortex-a9-scu", },
> @@ -112,5 +72,3 @@ struct smp_operations __initdata vexpress_smp_dt_ops = {
>         .cpu_die                = vexpress_cpu_die,
>  #endif
>  };
> -
> -#endif
> diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
> index 6ff681a..a0400f4 100644
> --- a/arch/arm/mach-vexpress/v2m.c
> +++ b/arch/arm/mach-vexpress/v2m.c
> @@ -1,380 +1,7 @@
> -/*
> - * Versatile Express V2M Motherboard Support
> - */
> -#include <linux/device.h>
> -#include <linux/amba/bus.h>
> -#include <linux/amba/mmci.h>
> -#include <linux/io.h>
> -#include <linux/smp.h>
> -#include <linux/init.h>
> -#include <linux/of_address.h>
> -#include <linux/of_fdt.h>
> -#include <linux/of_irq.h>
> -#include <linux/of_platform.h>
> -#include <linux/platform_device.h>
> -#include <linux/ata_platform.h>
> -#include <linux/smsc911x.h>
> -#include <linux/spinlock.h>
> -#include <linux/usb/isp1760.h>
> -#include <linux/mtd/physmap.h>
> -#include <linux/regulator/fixed.h>
> -#include <linux/regulator/machine.h>
> -#include <linux/vexpress.h>
> -#include <linux/clkdev.h>
> -
> -#include <asm/mach-types.h>
> -#include <asm/sizes.h>
>  #include <asm/mach/arch.h>
> -#include <asm/mach/map.h>
> -#include <asm/mach/time.h>
> -#include <asm/hardware/arm_timer.h>
> -#include <asm/hardware/cache-l2x0.h>
> -#include <asm/hardware/timer-sp.h>
> -
> -#include <mach/ct-ca9x4.h>
> -#include <mach/motherboard.h>
> -
> -#include <plat/sched_clock.h>
> -#include <plat/platsmp.h>
>  
>  #include "core.h"
>  
> -#define V2M_PA_CS0     0x40000000
> -#define V2M_PA_CS1     0x44000000
> -#define V2M_PA_CS2     0x48000000
> -#define V2M_PA_CS3     0x4c000000
> -#define V2M_PA_CS7     0x10000000
> -
> -static struct map_desc v2m_io_desc[] __initdata = {
> -       {
> -               .virtual        = V2M_PERIPH,
> -               .pfn            = __phys_to_pfn(V2M_PA_CS7),
> -               .length         = SZ_128K,
> -               .type           = MT_DEVICE,
> -       },
> -};
> -
> -static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
> -{
> -       if (WARN_ON(!base || irq == NO_IRQ))
> -               return;
> -
> -       sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1");
> -       sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0");
> -}
> -
> -
> -static struct resource v2m_pcie_i2c_resource = {
> -       .start  = V2M_SERIAL_BUS_PCI,
> -       .end    = V2M_SERIAL_BUS_PCI + SZ_4K - 1,
> -       .flags  = IORESOURCE_MEM,
> -};
> -
> -static struct platform_device v2m_pcie_i2c_device = {
> -       .name           = "versatile-i2c",
> -       .id             = 0,
> -       .num_resources  = 1,
> -       .resource       = &v2m_pcie_i2c_resource,
> -};
> -
> -static struct resource v2m_ddc_i2c_resource = {
> -       .start  = V2M_SERIAL_BUS_DVI,
> -       .end    = V2M_SERIAL_BUS_DVI + SZ_4K - 1,
> -       .flags  = IORESOURCE_MEM,
> -};
> -
> -static struct platform_device v2m_ddc_i2c_device = {
> -       .name           = "versatile-i2c",
> -       .id             = 1,
> -       .num_resources  = 1,
> -       .resource       = &v2m_ddc_i2c_resource,
> -};
> -
> -static struct resource v2m_eth_resources[] = {
> -       {
> -               .start  = V2M_LAN9118,
> -               .end    = V2M_LAN9118 + SZ_64K - 1,
> -               .flags  = IORESOURCE_MEM,
> -       }, {
> -               .start  = IRQ_V2M_LAN9118,
> -               .end    = IRQ_V2M_LAN9118,
> -               .flags  = IORESOURCE_IRQ,
> -       },
> -};
> -
> -static struct smsc911x_platform_config v2m_eth_config = {
> -       .flags          = SMSC911X_USE_32BIT,
> -       .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
> -       .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
> -       .phy_interface  = PHY_INTERFACE_MODE_MII,
> -};
> -
> -static struct platform_device v2m_eth_device = {
> -       .name           = "smsc911x",
> -       .id             = -1,
> -       .resource       = v2m_eth_resources,
> -       .num_resources  = ARRAY_SIZE(v2m_eth_resources),
> -       .dev.platform_data = &v2m_eth_config,
> -};
> -
> -static struct regulator_consumer_supply v2m_eth_supplies[] = {
> -       REGULATOR_SUPPLY("vddvario", "smsc911x"),
> -       REGULATOR_SUPPLY("vdd33a", "smsc911x"),
> -};
> -
> -static struct resource v2m_usb_resources[] = {
> -       {
> -               .start  = V2M_ISP1761,
> -               .end    = V2M_ISP1761 + SZ_128K - 1,
> -               .flags  = IORESOURCE_MEM,
> -       }, {
> -               .start  = IRQ_V2M_ISP1761,
> -               .end    = IRQ_V2M_ISP1761,
> -               .flags  = IORESOURCE_IRQ,
> -       },
> -};
> -
> -static struct isp1760_platform_data v2m_usb_config = {
> -       .is_isp1761             = true,
> -       .bus_width_16           = false,
> -       .port1_otg              = true,
> -       .analog_oc              = false,
> -       .dack_polarity_high     = false,
> -       .dreq_polarity_high     = false,
> -};
> -
> -static struct platform_device v2m_usb_device = {
> -       .name           = "isp1760",
> -       .id             = -1,
> -       .resource       = v2m_usb_resources,
> -       .num_resources  = ARRAY_SIZE(v2m_usb_resources),
> -       .dev.platform_data = &v2m_usb_config,
> -};
> -
> -static struct physmap_flash_data v2m_flash_data = {
> -       .width          = 4,
> -};
> -
> -static struct resource v2m_flash_resources[] = {
> -       {
> -               .start  = V2M_NOR0,
> -               .end    = V2M_NOR0 + SZ_64M - 1,
> -               .flags  = IORESOURCE_MEM,
> -       }, {
> -               .start  = V2M_NOR1,
> -               .end    = V2M_NOR1 + SZ_64M - 1,
> -               .flags  = IORESOURCE_MEM,
> -       },
> -};
> -
> -static struct platform_device v2m_flash_device = {
> -       .name           = "physmap-flash",
> -       .id             = -1,
> -       .resource       = v2m_flash_resources,
> -       .num_resources  = ARRAY_SIZE(v2m_flash_resources),
> -       .dev.platform_data = &v2m_flash_data,
> -};
> -
> -static struct pata_platform_info v2m_pata_data = {
> -       .ioport_shift   = 2,
> -};
> -
> -static struct resource v2m_pata_resources[] = {
> -       {
> -               .start  = V2M_CF,
> -               .end    = V2M_CF + 0xff,
> -               .flags  = IORESOURCE_MEM,
> -       }, {
> -               .start  = V2M_CF + 0x100,
> -               .end    = V2M_CF + SZ_4K - 1,
> -               .flags  = IORESOURCE_MEM,
> -       },
> -};
> -
> -static struct platform_device v2m_cf_device = {
> -       .name           = "pata_platform",
> -       .id             = -1,
> -       .resource       = v2m_pata_resources,
> -       .num_resources  = ARRAY_SIZE(v2m_pata_resources),
> -       .dev.platform_data = &v2m_pata_data,
> -};
> -
> -static struct mmci_platform_data v2m_mmci_data = {
> -       .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
> -       .status         = vexpress_get_mci_cardin,
> -       .gpio_cd        = -1,
> -       .gpio_wp        = -1,
> -};
> -
> -static struct resource v2m_sysreg_resources[] = {
> -       {
> -               .start  = V2M_SYSREGS,
> -               .end    = V2M_SYSREGS + 0xfff,
> -               .flags  = IORESOURCE_MEM,
> -       },
> -};
> -
> -static struct platform_device v2m_sysreg_device = {
> -       .name           = "vexpress-sysreg",
> -       .id             = -1,
> -       .resource       = v2m_sysreg_resources,
> -       .num_resources  = ARRAY_SIZE(v2m_sysreg_resources),
> -};
> -
> -static struct platform_device v2m_muxfpga_device = {
> -       .name           = "vexpress-muxfpga",
> -       .id             = 0,
> -       .num_resources  = 1,
> -       .resource       = (struct resource []) {
> -               VEXPRESS_RES_FUNC(0, 7),
> -       }
> -};
> -
> -static struct platform_device v2m_shutdown_device = {
> -       .name           = "vexpress-shutdown",
> -       .id             = 0,
> -       .num_resources  = 1,
> -       .resource       = (struct resource []) {
> -               VEXPRESS_RES_FUNC(0, 8),
> -       }
> -};
> -
> -static struct platform_device v2m_reboot_device = {
> -       .name           = "vexpress-reboot",
> -       .id             = 0,
> -       .num_resources  = 1,
> -       .resource       = (struct resource []) {
> -               VEXPRESS_RES_FUNC(0, 9),
> -       }
> -};
> -
> -static struct platform_device v2m_dvimode_device = {
> -       .name           = "vexpress-dvimode",
> -       .id             = 0,
> -       .num_resources  = 1,
> -       .resource       = (struct resource []) {
> -               VEXPRESS_RES_FUNC(0, 11),
> -       }
> -};
> -
> -static AMBA_APB_DEVICE(aaci,  "mb:aaci",  0, V2M_AACI, IRQ_V2M_AACI, NULL);
> -static AMBA_APB_DEVICE(mmci,  "mb:mmci",  0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
> -static AMBA_APB_DEVICE(kmi0,  "mb:kmi0",  0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
> -static AMBA_APB_DEVICE(kmi1,  "mb:kmi1",  0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
> -static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
> -static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
> -static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
> -static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
> -static AMBA_APB_DEVICE(wdt,   "mb:wdt",   0, V2M_WDT, IRQ_V2M_WDT, NULL);
> -static AMBA_APB_DEVICE(rtc,   "mb:rtc",   0, V2M_RTC, IRQ_V2M_RTC, NULL);
> -
> -static struct amba_device *v2m_amba_devs[] __initdata = {
> -       &aaci_device,
> -       &mmci_device,
> -       &kmi0_device,
> -       &kmi1_device,
> -       &uart0_device,
> -       &uart1_device,
> -       &uart2_device,
> -       &uart3_device,
> -       &wdt_device,
> -       &rtc_device,
> -};
> -
> -static void __init v2m_timer_init(void)
> -{
> -       vexpress_clk_init(ioremap(V2M_SYSCTL, SZ_4K));
> -       v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
> -}
> -
> -static void __init v2m_init_early(void)
> -{
> -       if (ct_desc->init_early)
> -               ct_desc->init_early();
> -       versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
> -}
> -
> -struct ct_desc *ct_desc;
> -
> -static struct ct_desc *ct_descs[] __initdata = {
> -#ifdef CONFIG_ARCH_VEXPRESS_CA9X4
> -       &ct_ca9x4_desc,
> -#endif
> -};
> -
> -static void __init v2m_populate_ct_desc(void)
> -{
> -       int i;
> -       u32 current_tile_id;
> -
> -       ct_desc = NULL;
> -       current_tile_id = vexpress_get_procid(VEXPRESS_SITE_MASTER)
> -                               & V2M_CT_ID_MASK;
> -
> -       for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i)
> -               if (ct_descs[i]->id == current_tile_id)
> -                       ct_desc = ct_descs[i];
> -
> -       if (!ct_desc)
> -               panic("vexpress: this kernel does not support core tile ID 0x%08x when booting via ATAGs.\n"
> -                     "You may need a device tree blob or a different kernel to boot on this board.\n",
> -                     current_tile_id);
> -}
> -
> -static void __init v2m_map_io(void)
> -{
> -       iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
> -       vexpress_sysreg_early_init(ioremap(V2M_SYSREGS, SZ_4K));
> -       v2m_populate_ct_desc();
> -       ct_desc->map_io();
> -}
> -
> -static void __init v2m_init_irq(void)
> -{
> -       ct_desc->init_irq();
> -}
> -
> -static void __init v2m_init(void)
> -{
> -       int i;
> -
> -       regulator_register_fixed(0, v2m_eth_supplies,
> -                       ARRAY_SIZE(v2m_eth_supplies));
> -
> -       platform_device_register(&v2m_sysreg_device);
> -       platform_device_register(&v2m_pcie_i2c_device);
> -       platform_device_register(&v2m_ddc_i2c_device);
> -       platform_device_register(&v2m_flash_device);
> -       platform_device_register(&v2m_cf_device);
> -       platform_device_register(&v2m_eth_device);
> -       platform_device_register(&v2m_usb_device);
> -
> -       for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
> -               amba_device_register(v2m_amba_devs[i], &iomem_resource);
> -
> -       vexpress_syscfg_device_register(&v2m_muxfpga_device);
> -       vexpress_syscfg_device_register(&v2m_shutdown_device);
> -       vexpress_syscfg_device_register(&v2m_reboot_device);
> -       vexpress_syscfg_device_register(&v2m_dvimode_device);
> -
> -       ct_desc->init_tile();
> -}
> -
> -MACHINE_START(VEXPRESS, "ARM-Versatile Express")
> -       .atag_offset    = 0x100,
> -       .smp            = smp_ops(vexpress_smp_ops),
> -       .map_io         = v2m_map_io,
> -       .init_early     = v2m_init_early,
> -       .init_irq       = v2m_init_irq,
> -       .init_time      = v2m_timer_init,
> -       .init_machine   = v2m_init,
> -MACHINE_END
> -
> -static void __init v2m_dt_init(void)
> -{
> -       of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> -}
> -
>  static const char * const v2m_dt_match[] __initconst = {
>         "arm,vexpress",
>         NULL,
> @@ -386,5 +13,4 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
>         .l2c_aux_mask   = 0xfe0fffff,
>         .smp            = smp_ops(vexpress_smp_dt_ops),
>         .smp_init       = smp_init_ops(vexpress_smp_init_ops),
> -       .init_machine   = v2m_dt_init,
>  MACHINE_END
> diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
> index a301ca2..49b8ef9 100644
> --- a/arch/arm/plat-versatile/Kconfig
> +++ b/arch/arm/plat-versatile/Kconfig
> @@ -4,6 +4,6 @@ config PLAT_VERSATILE_CLOCK
>         bool
>  
>  config PLAT_VERSATILE_SCHED_CLOCK
> -       def_bool y
> +       bool
>  
>  endif
> diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
> index 162e519..8ff0374 100644
> --- a/drivers/clk/versatile/Makefile
> +++ b/drivers/clk/versatile/Makefile
> @@ -2,6 +2,5 @@
>  obj-$(CONFIG_ICST)             += clk-icst.o clk-versatile.o
>  obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
>  obj-$(CONFIG_ARCH_REALVIEW)    += clk-realview.o
> -obj-$(CONFIG_ARCH_VEXPRESS)    += clk-vexpress.o
>  obj-$(CONFIG_CLK_SP810)                += clk-sp810.o
>  obj-$(CONFIG_CLK_VEXPRESS_OSC) += clk-vexpress-osc.o
> diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c
> index 529a59c..765f1e0 100644
> --- a/drivers/clk/versatile/clk-vexpress-osc.c
> +++ b/drivers/clk/versatile/clk-vexpress-osc.c
> @@ -70,7 +70,6 @@ static struct clk_ops vexpress_osc_ops = {
>  
>  static int vexpress_osc_probe(struct platform_device *pdev)
>  {
> -       struct clk_lookup *cl = pdev->dev.platform_data; /* Non-DT lookup */
>         struct clk_init_data init;
>         struct vexpress_osc *osc;
>         struct clk *clk;
> @@ -106,12 +105,6 @@ static int vexpress_osc_probe(struct platform_device *pdev)
>  
>         of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, clk);
>  
> -       /* Only happens for non-DT cases */
> -       if (cl) {
> -               cl->clk = clk;
> -               clkdev_add(cl);
> -       }
> -
>         dev_dbg(&pdev->dev, "Registered clock '%s'\n", init.name);
>  
>         return 0;
> diff --git a/drivers/clk/versatile/clk-vexpress.c b/drivers/clk/versatile/clk-vexpress.c
> deleted file mode 100644
> index 2d5e1b4..0000000
> --- a/drivers/clk/versatile/clk-vexpress.c
> +++ /dev/null
> @@ -1,86 +0,0 @@
> -/*
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * Copyright (C) 2012 ARM Limited
> - */
> -
> -#include <linux/amba/sp810.h>
> -#include <linux/clkdev.h>
> -#include <linux/clk-provider.h>
> -#include <linux/err.h>
> -#include <linux/vexpress.h>
> -
> -static struct clk *vexpress_sp810_timerclken[4];
> -static DEFINE_SPINLOCK(vexpress_sp810_lock);
> -
> -static void __init vexpress_sp810_init(void __iomem *base)
> -{
> -       int i;
> -
> -       if (WARN_ON(!base))
> -               return;
> -
> -       for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) {
> -               char name[12];
> -               const char *parents[] = {
> -                       "v2m:refclk32khz", /* REFCLK */
> -                       "v2m:refclk1mhz" /* TIMCLK */
> -               };
> -
> -               snprintf(name, ARRAY_SIZE(name), "timerclken%d", i);
> -
> -               vexpress_sp810_timerclken[i] = clk_register_mux(NULL, name,
> -                               parents, 2, CLK_SET_RATE_NO_REPARENT,
> -                               base + SCCTRL, SCCTRL_TIMERENnSEL_SHIFT(i), 1,
> -                               0, &vexpress_sp810_lock);
> -
> -               if (WARN_ON(IS_ERR(vexpress_sp810_timerclken[i])))
> -                       break;
> -       }
> -}
> -
> -
> -static const char * const vexpress_clk_24mhz_periphs[] __initconst = {
> -       "mb:uart0", "mb:uart1", "mb:uart2", "mb:uart3",
> -       "mb:mmci", "mb:kmi0", "mb:kmi1"
> -};
> -
> -void __init vexpress_clk_init(void __iomem *sp810_base)
> -{
> -       struct clk *clk;
> -       int i;
> -
> -       clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL,
> -                       CLK_IS_ROOT, 0);
> -       WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL));
> -
> -       clk = clk_register_fixed_rate(NULL, "v2m:clk_24mhz", NULL,
> -                       CLK_IS_ROOT, 24000000);
> -       for (i = 0; i < ARRAY_SIZE(vexpress_clk_24mhz_periphs); i++)
> -               WARN_ON(clk_register_clkdev(clk, NULL,
> -                               vexpress_clk_24mhz_periphs[i]));
> -
> -       clk = clk_register_fixed_rate(NULL, "v2m:refclk32khz", NULL,
> -                       CLK_IS_ROOT, 32768);
> -       WARN_ON(clk_register_clkdev(clk, NULL, "v2m:wdt"));
> -
> -       clk = clk_register_fixed_rate(NULL, "v2m:refclk1mhz", NULL,
> -                       CLK_IS_ROOT, 1000000);
> -
> -       vexpress_sp810_init(sp810_base);
> -
> -       for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++)
> -               WARN_ON(clk_set_parent(vexpress_sp810_timerclken[i], clk));
> -
> -       WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[0],
> -                               "v2m-timer0", "sp804"));
> -       WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[1],
> -                               "v2m-timer1", "sp804"));
> -}
> diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
> index 9e21e4f..7147b30 100644
> --- a/drivers/mfd/vexpress-sysreg.c
> +++ b/drivers/mfd/vexpress-sysreg.c
> @@ -47,71 +47,26 @@
>  #define SYS_HBI_MASK           0xfff
>  #define SYS_PROCIDx_HBI_SHIFT  0
>  
> -#define SYS_MCI_CARDIN         (1 << 0)
> -#define SYS_MCI_WPROT          (1 << 1)
> -
>  #define SYS_MISC_MASTERSITE    (1 << 14)
>  
> -
> -static void __iomem *__vexpress_sysreg_base;
> -
> -static void __iomem *vexpress_sysreg_base(void)
> +void vexpress_flags_set(u32 data)
>  {
> -       if (!__vexpress_sysreg_base) {
> +       static void __iomem *base;
> +
> +       if (!base) {
>                 struct device_node *node = of_find_compatible_node(NULL, NULL,
>                                 "arm,vexpress-sysreg");
>  
> -               __vexpress_sysreg_base = of_iomap(node, 0);
> +               base = of_iomap(node, 0);
>         }
>  
> -       WARN_ON(!__vexpress_sysreg_base);
> -
> -       return __vexpress_sysreg_base;
> -}
> -
> -
> -static int vexpress_sysreg_get_master(void)
> -{
> -       if (readl(vexpress_sysreg_base() + SYS_MISC) & SYS_MISC_MASTERSITE)
> -               return VEXPRESS_SITE_DB2;
> -
> -       return VEXPRESS_SITE_DB1;
> -}
> -
> -void vexpress_flags_set(u32 data)
> -{
> -       writel(~0, vexpress_sysreg_base() + SYS_FLAGSCLR);
> -       writel(data, vexpress_sysreg_base() + SYS_FLAGSSET);
> -}
> -
> -unsigned int vexpress_get_mci_cardin(struct device *dev)
> -{
> -       return readl(vexpress_sysreg_base() + SYS_MCI) & SYS_MCI_CARDIN;
> -}
> -
> -u32 vexpress_get_procid(int site)
> -{
> -       if (site == VEXPRESS_SITE_MASTER)
> -               site = vexpress_sysreg_get_master();
> +       if (WARN_ON(!base))
> +               return;
>  
> -       return readl(vexpress_sysreg_base() + (site == VEXPRESS_SITE_DB1 ?
> -                       SYS_PROCID0 : SYS_PROCID1));
> +       writel(~0, base + SYS_FLAGSCLR);
> +       writel(data, base + SYS_FLAGSSET);
>  }
>  
> -void __iomem *vexpress_get_24mhz_clock_base(void)
> -{
> -       return vexpress_sysreg_base() + SYS_24MHZ;
> -}
> -
> -
> -void __init vexpress_sysreg_early_init(void __iomem *base)
> -{
> -       __vexpress_sysreg_base = base;
> -
> -       vexpress_config_set_master(vexpress_sysreg_get_master());
> -}
> -
> -
>  /* The sysreg block is just a random collection of various functions... */
>  
>  static struct syscon_platform_data vexpress_sysreg_sys_id_pdata = {
> @@ -210,6 +165,7 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
>         struct resource *mem;
>         void __iomem *base;
>         struct bgpio_chip *mmc_gpio_chip;
> +       int master;
>         u32 dt_hbi;
>  
>         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -220,11 +176,14 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
>         if (!base)
>                 return -ENOMEM;
>  
> -       vexpress_config_set_master(vexpress_sysreg_get_master());
> +       master = readl(base + SYS_MISC) & SYS_MISC_MASTERSITE ?
> +                       VEXPRESS_SITE_DB2 : VEXPRESS_SITE_DB1;
> +       vexpress_config_set_master(master);
>  
>         /* Confirm board type against DT property, if available */
>         if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) {
> -               u32 id = vexpress_get_procid(VEXPRESS_SITE_MASTER);
> +               u32 id = readl(base + (master == VEXPRESS_SITE_DB1 ?
> +                                SYS_PROCID0 : SYS_PROCID1));
>                 u32 hbi = (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK;
>  
>                 if (WARN_ON(dt_hbi != hbi))
> diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c
> index b3a8123..c344483 100644
> --- a/drivers/misc/vexpress-syscfg.c
> +++ b/drivers/misc/vexpress-syscfg.c
> @@ -145,7 +145,7 @@ static struct regmap_config vexpress_syscfg_regmap_config = {
>  static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
>                 void *context)
>  {
> -       struct platform_device *pdev = to_platform_device(dev);
> +       int err;
>         struct vexpress_syscfg *syscfg = context;
>         struct vexpress_syscfg_func *func;
>         struct property *prop;
> @@ -155,32 +155,18 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
>         u32 site, position, dcc;
>         int i;
>  
> -       if (dev->of_node) {
> -               int err = vexpress_config_get_topo(dev->of_node, &site,
> +       err = vexpress_config_get_topo(dev->of_node, &site,
>                                 &position, &dcc);
> +       if (err)
> +               return ERR_PTR(err);
>  
> -               if (err)
> -                       return ERR_PTR(err);
> -
> -               prop = of_find_property(dev->of_node,
> -                               "arm,vexpress-sysreg,func", NULL);
> -               if (!prop)
> -                       return ERR_PTR(-EINVAL);
> -
> -               num = prop->length / sizeof(u32) / 2;
> -               val = prop->value;
> -       } else {
> -               if (pdev->num_resources != 1 ||
> -                               pdev->resource[0].flags != IORESOURCE_BUS)
> -                       return ERR_PTR(-EFAULT);
> -
> -               site = pdev->resource[0].start;
> -               if (site == VEXPRESS_SITE_MASTER)
> -                       site = vexpress_config_get_master();
> -               position = 0;
> -               dcc = 0;
> -               num = 1;
> -       }
> +       prop = of_find_property(dev->of_node,
> +                       "arm,vexpress-sysreg,func", NULL);
> +       if (!prop)
> +               return ERR_PTR(-EINVAL);
> +
> +       num = prop->length / sizeof(u32) / 2;
> +       val = prop->value;
>  
>         /*
>          * "arm,vexpress-energy" function used to be described
> @@ -207,13 +193,8 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
>         for (i = 0; i < num; i++) {
>                 u32 function, device;
>  
> -               if (dev->of_node) {
> -                       function = be32_to_cpup(val++);
> -                       device = be32_to_cpup(val++);
> -               } else {
> -                       function = pdev->resource[0].end;
> -                       device = pdev->id;
> -               }
> +               function = be32_to_cpup(val++);
> +               device = be32_to_cpup(val++);
>  
>                 dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n",
>                                 func, site, position, dcc,
> @@ -265,17 +246,6 @@ static struct vexpress_config_bridge_ops vexpress_syscfg_bridge_ops = {
>  };
>  
>  
> -/* Non-DT hack, to be gone... */
> -static struct device *vexpress_syscfg_bridge;
> -
> -int vexpress_syscfg_device_register(struct platform_device *pdev)
> -{
> -       pdev->dev.parent = vexpress_syscfg_bridge;
> -
> -       return platform_device_register(pdev);
> -}
> -
> -
>  static int vexpress_syscfg_probe(struct platform_device *pdev)
>  {
>         struct vexpress_syscfg *syscfg;
> @@ -303,10 +273,6 @@ static int vexpress_syscfg_probe(struct platform_device *pdev)
>         if (IS_ERR(bridge))
>                 return PTR_ERR(bridge);
>  
> -       /* Non-DT case */
> -       if (!pdev->dev.of_node)
> -               vexpress_syscfg_bridge = bridge;
> -
>         return 0;
>  }
>  
> diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c
> index 4dc102e2..7b9b6ea 100644
> --- a/drivers/power/reset/vexpress-poweroff.c
> +++ b/drivers/power/reset/vexpress-poweroff.c
> @@ -88,22 +88,19 @@ static struct of_device_id vexpress_reset_of_match[] = {
>  
>  static int vexpress_reset_probe(struct platform_device *pdev)
>  {
> -       enum vexpress_reset_func func;
>         const struct of_device_id *match =
>                         of_match_device(vexpress_reset_of_match, &pdev->dev);
>         struct regmap *regmap;
>  
> -       if (match)
> -               func = (enum vexpress_reset_func)match->data;
> -       else
> -               func = pdev->id_entry->driver_data;
> +       if (!match)
> +               return -EINVAL;
>  
>         regmap = devm_regmap_init_vexpress_config(&pdev->dev);
>         if (IS_ERR(regmap))
>                 return PTR_ERR(regmap);
>         dev_set_drvdata(&pdev->dev, regmap);
>  
> -       switch (func) {
> +       switch ((enum vexpress_reset_func)match->data) {
>         case FUNC_SHUTDOWN:
>                 vexpress_power_off_device = &pdev->dev;
>                 pm_power_off = vexpress_power_off;
> @@ -124,20 +121,12 @@ static int vexpress_reset_probe(struct platform_device *pdev)
>         return 0;
>  }
>  
> -static const struct platform_device_id vexpress_reset_id_table[] = {
> -       { .name = "vexpress-reset", .driver_data = FUNC_RESET, },
> -       { .name = "vexpress-shutdown", .driver_data = FUNC_SHUTDOWN, },
> -       { .name = "vexpress-reboot", .driver_data = FUNC_REBOOT, },
> -       {}
> -};
> -
>  static struct platform_driver vexpress_reset_driver = {
>         .probe = vexpress_reset_probe,
>         .driver = {
>                 .name = "vexpress-reset",
>                 .of_match_table = vexpress_reset_of_match,
>         },
> -       .id_table = vexpress_reset_id_table,
>  };
>  
>  static int __init vexpress_reset_init(void)
> diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h
> index a4c9547..f8e76e0 100644
> --- a/include/linux/vexpress.h
> +++ b/include/linux/vexpress.h
> @@ -15,8 +15,6 @@
>  #define _LINUX_VEXPRESS_H
>  
>  #include <linux/device.h>
> -#include <linux/platform_device.h>
> -#include <linux/reboot.h>
>  #include <linux/regmap.h>
>  
>  #define VEXPRESS_SITE_MB               0
> @@ -24,13 +22,6 @@
>  #define VEXPRESS_SITE_DB2              2
>  #define VEXPRESS_SITE_MASTER           0xf
>  
> -#define VEXPRESS_RES_FUNC(_site, _func)        \
> -{                                      \
> -       .start = (_site),               \
> -       .end = (_func),                 \
> -       .flags = IORESOURCE_BUS,        \
> -}
> -
>  /* Config infrastructure */
>  
>  void vexpress_config_set_master(u32 site);
> @@ -58,16 +49,6 @@ struct regmap *devm_regmap_init_vexpress_config(struct device *dev);
>  
>  /* Platform control */
>  
> -unsigned int vexpress_get_mci_cardin(struct device *dev);
> -u32 vexpress_get_procid(int site);
> -void *vexpress_get_24mhz_clock_base(void);
>  void vexpress_flags_set(u32 data);
>  
> -void vexpress_sysreg_early_init(void __iomem *base);
> -int vexpress_syscfg_device_register(struct platform_device *pdev);
> -
> -/* Clocks */
> -
> -void vexpress_clk_init(void __iomem *sp810_base);
> -
>  #endif
> -- 
> 1.9.1
>
Lee Jones Sept. 16, 2014, 11:30 p.m. UTC | #4
On Wed, 10 Sep 2014, Pawel Moll wrote:

> Now, with the CLCD DT support available, there is no
> more reason to keep the non-DT support for V2P-CA9.
> 
> Removed, together with "some" supporting code. It was
> necessary to make PLAT_VERSATILE_SCHED_CLOCK optional
> and selected by the machines still interested in it.
> 
> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
> ---
>  arch/arm/Kconfig                                  |   2 +
>  arch/arm/mach-vexpress/Kconfig                    |   3 -
>  arch/arm/mach-vexpress/Makefile                   |   3 +-
>  arch/arm/mach-vexpress/core.h                     |   7 -
>  arch/arm/mach-vexpress/ct-ca9x4.c                 | 212 ------------
>  arch/arm/mach-vexpress/include/mach/ct-ca9x4.h    |  47 ---
>  arch/arm/mach-vexpress/include/mach/hardware.h    |   1 -
>  arch/arm/mach-vexpress/include/mach/irqs.h        |   6 -
>  arch/arm/mach-vexpress/include/mach/motherboard.h |  88 -----
>  arch/arm/mach-vexpress/platsmp.c                  |  42 ---
>  arch/arm/mach-vexpress/v2m.c                      | 374 ----------------------
>  arch/arm/plat-versatile/Kconfig                   |   2 +-
>  drivers/clk/versatile/Makefile                    |   1 -
>  drivers/clk/versatile/clk-vexpress-osc.c          |   7 -
>  drivers/clk/versatile/clk-vexpress.c              |  86 -----
>  drivers/mfd/vexpress-sysreg.c                     |  71 +---
>  drivers/misc/vexpress-syscfg.c                    |  60 +---
>  drivers/power/reset/vexpress-poweroff.c           |  17 +-
>  include/linux/vexpress.h                          |  19 --
>  19 files changed, 35 insertions(+), 1013 deletions(-)
>  delete mode 100644 arch/arm/mach-vexpress/ct-ca9x4.c
>  delete mode 100644 arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
>  delete mode 100644 arch/arm/mach-vexpress/include/mach/hardware.h
>  delete mode 100644 arch/arm/mach-vexpress/include/mach/irqs.h
>  delete mode 100644 arch/arm/mach-vexpress/include/mach/motherboard.h
>  delete mode 100644 drivers/clk/versatile/clk-vexpress.c

Is it really necessary to take the one-big-patch approach?  I'm sure
you can find a nicer way than to burden all these maintainers.
Naturally I can't speak for everyone concerned, but I don't really
want to be carrying all this if I don't have to.  Granted I'm not
carrying any patches touching drivers/mfd/vexpress-sysreg.c at the
moment, but equally I don't want to rule that out.
Pawel Moll Sept. 17, 2014, 2:59 p.m. UTC | #5
On Wed, 2014-09-17 at 00:30 +0100, Lee Jones wrote:
> On Wed, 10 Sep 2014, Pawel Moll wrote:
> 
> > Now, with the CLCD DT support available, there is no
> > more reason to keep the non-DT support for V2P-CA9.
> > 
> > Removed, together with "some" supporting code. It was
> > necessary to make PLAT_VERSATILE_SCHED_CLOCK optional
> > and selected by the machines still interested in it.
> > 
> > Signed-off-by: Pawel Moll <pawel.moll@arm.com>
> > ---
> >  arch/arm/Kconfig                                  |   2 +
> >  arch/arm/mach-vexpress/Kconfig                    |   3 -
> >  arch/arm/mach-vexpress/Makefile                   |   3 +-
> >  arch/arm/mach-vexpress/core.h                     |   7 -
> >  arch/arm/mach-vexpress/ct-ca9x4.c                 | 212 ------------
> >  arch/arm/mach-vexpress/include/mach/ct-ca9x4.h    |  47 ---
> >  arch/arm/mach-vexpress/include/mach/hardware.h    |   1 -
> >  arch/arm/mach-vexpress/include/mach/irqs.h        |   6 -
> >  arch/arm/mach-vexpress/include/mach/motherboard.h |  88 -----
> >  arch/arm/mach-vexpress/platsmp.c                  |  42 ---
> >  arch/arm/mach-vexpress/v2m.c                      | 374 ----------------------
> >  arch/arm/plat-versatile/Kconfig                   |   2 +-
> >  drivers/clk/versatile/Makefile                    |   1 -
> >  drivers/clk/versatile/clk-vexpress-osc.c          |   7 -
> >  drivers/clk/versatile/clk-vexpress.c              |  86 -----
> >  drivers/mfd/vexpress-sysreg.c                     |  71 +---
> >  drivers/misc/vexpress-syscfg.c                    |  60 +---
> >  drivers/power/reset/vexpress-poweroff.c           |  17 +-
> >  include/linux/vexpress.h                          |  19 --
> >  19 files changed, 35 insertions(+), 1013 deletions(-)
> >  delete mode 100644 arch/arm/mach-vexpress/ct-ca9x4.c
> >  delete mode 100644 arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
> >  delete mode 100644 arch/arm/mach-vexpress/include/mach/hardware.h
> >  delete mode 100644 arch/arm/mach-vexpress/include/mach/irqs.h
> >  delete mode 100644 arch/arm/mach-vexpress/include/mach/motherboard.h
> >  delete mode 100644 drivers/clk/versatile/clk-vexpress.c
> 
> Is it really necessary to take the one-big-patch approach?  I'm sure
> you can find a nicer way than to burden all these maintainers.
> Naturally I can't speak for everyone concerned, but I don't really
> want to be carrying all this if I don't have to.  Granted I'm not
> carrying any patches touching drivers/mfd/vexpress-sysreg.c at the
> moment, but equally I don't want to rule that out.

I feel that getting all this stuff done (notice: no new features, just
removing existing stuff) was the simplest approach, without having to
rely on patches being merged in particular order.

Besides, there are three things there that are not directly maintained
by the arm-soc folk: clk (already acked by Mike), mfd (you) and
power/reset. So I thought that gathering acks for those and getting it
merged via arm-soc would be the simplest approach...

Pawel
Russell King - ARM Linux Sept. 17, 2014, 3:27 p.m. UTC | #6
On Wed, Sep 10, 2014 at 04:40:57PM +0100, Pawel Moll wrote:
> On Wed, 2014-09-10 at 15:58 +0100, Russell King - ARM Linux wrote:
> > So, I'll then be asking ARM to provide updated instructions on how to
> > boot the CT9x4 with DT... 
> 
> The same version (although different build) of the Boot Monitor you have
> got for CA15_A7 (a.k.a. TC2) is able to boot CA9x4 with DT. It has got
> the same limitations though, namely no TFTP support, if this is your
> main concern (there is no ARM-provided uboot for TC2 either).

I don't use Boot Monitor.  I use uboot.  I use uboot because uboot supports
network booting.  I *require* networking booting.  Boot Monitor is a piece
of crap that no sane kernel developer would ever use as a boot environment.
I also boot a root filesystem off the MMC slot.

As for TC2, I just don't bother with that.  It's really not worth the
hastle.  I asked for help with that and got almost nothing.  Yes, there's
Nicolas' uboot, which solves some problems, but getting the kernel to
boot on TC2 turned out to be a dead loss - and no help with it was
forthcoming.  So I've permanently shelved the TC2 tile.  ARM Ltd can
have the TC2 tile back for all I care, it's more useful to me as a door
stop than something for running Linux.

Let me repeat: a boot loader with network booting capability is an
absolute necessity for me.  This is *required* for unattended boots of
kernels which have just been built.  If a platform doesn't have this
capability, I'm just not interested in it, and I _will_ not use it.  It
really is that simple.

My position on the boot loader issue is not going to change; it's a
fundamental requirement for automatic build and boot testing, and for
efficient workflow at other times.
Lee Jones Sept. 17, 2014, 3:42 p.m. UTC | #7
On Wed, 17 Sep 2014, Pawel Moll wrote:
> On Wed, 2014-09-17 at 00:30 +0100, Lee Jones wrote:
> > On Wed, 10 Sep 2014, Pawel Moll wrote:
> > 
> > > Now, with the CLCD DT support available, there is no
> > > more reason to keep the non-DT support for V2P-CA9.
> > > 
> > > Removed, together with "some" supporting code. It was
> > > necessary to make PLAT_VERSATILE_SCHED_CLOCK optional
> > > and selected by the machines still interested in it.
> > > 
> > > Signed-off-by: Pawel Moll <pawel.moll@arm.com>
> > > ---
> > >  arch/arm/Kconfig                                  |   2 +
> > >  arch/arm/mach-vexpress/Kconfig                    |   3 -
> > >  arch/arm/mach-vexpress/Makefile                   |   3 +-
> > >  arch/arm/mach-vexpress/core.h                     |   7 -
> > >  arch/arm/mach-vexpress/ct-ca9x4.c                 | 212 ------------
> > >  arch/arm/mach-vexpress/include/mach/ct-ca9x4.h    |  47 ---
> > >  arch/arm/mach-vexpress/include/mach/hardware.h    |   1 -
> > >  arch/arm/mach-vexpress/include/mach/irqs.h        |   6 -
> > >  arch/arm/mach-vexpress/include/mach/motherboard.h |  88 -----
> > >  arch/arm/mach-vexpress/platsmp.c                  |  42 ---
> > >  arch/arm/mach-vexpress/v2m.c                      | 374 ----------------------
> > >  arch/arm/plat-versatile/Kconfig                   |   2 +-
> > >  drivers/clk/versatile/Makefile                    |   1 -
> > >  drivers/clk/versatile/clk-vexpress-osc.c          |   7 -
> > >  drivers/clk/versatile/clk-vexpress.c              |  86 -----
> > >  drivers/mfd/vexpress-sysreg.c                     |  71 +---
> > >  drivers/misc/vexpress-syscfg.c                    |  60 +---
> > >  drivers/power/reset/vexpress-poweroff.c           |  17 +-
> > >  include/linux/vexpress.h                          |  19 --
> > >  19 files changed, 35 insertions(+), 1013 deletions(-)
> > >  delete mode 100644 arch/arm/mach-vexpress/ct-ca9x4.c
> > >  delete mode 100644 arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
> > >  delete mode 100644 arch/arm/mach-vexpress/include/mach/hardware.h
> > >  delete mode 100644 arch/arm/mach-vexpress/include/mach/irqs.h
> > >  delete mode 100644 arch/arm/mach-vexpress/include/mach/motherboard.h
> > >  delete mode 100644 drivers/clk/versatile/clk-vexpress.c
> > 
> > Is it really necessary to take the one-big-patch approach?  I'm sure
> > you can find a nicer way than to burden all these maintainers.
> > Naturally I can't speak for everyone concerned, but I don't really
> > want to be carrying all this if I don't have to.  Granted I'm not
> > carrying any patches touching drivers/mfd/vexpress-sysreg.c at the
> > moment, but equally I don't want to rule that out.
> 
> I feel that getting all this stuff done (notice: no new features, just
> removing existing stuff) was the simplest approach, without having to
> rely on patches being merged in particular order.
> 
> Besides, there are three things there that are not directly maintained
> by the arm-soc folk: clk (already acked by Mike), mfd (you) and
> power/reset. So I thought that gathering acks for those and getting it
> merged via arm-soc would be the simplest approach...

It's certainly the easiest approach for you, but it makes things
difficult for the maintainers as it would entail all 4 entities
carrying the patch.  The alternative is to hope there won't be any
subsequent changes to the files in our respective subsystems which
might cause conflicts.  I'm not keen on the latter idea.
Pawel Moll Sept. 17, 2014, 3:46 p.m. UTC | #8
On Wed, 2014-09-17 at 16:42 +0100, Lee Jones wrote:
> On Wed, 17 Sep 2014, Pawel Moll wrote:
> > On Wed, 2014-09-17 at 00:30 +0100, Lee Jones wrote:
> > > On Wed, 10 Sep 2014, Pawel Moll wrote:
> > > 
> > > > Now, with the CLCD DT support available, there is no
> > > > more reason to keep the non-DT support for V2P-CA9.
> > > > 
> > > > Removed, together with "some" supporting code. It was
> > > > necessary to make PLAT_VERSATILE_SCHED_CLOCK optional
> > > > and selected by the machines still interested in it.
> > > > 
> > > > Signed-off-by: Pawel Moll <pawel.moll@arm.com>
> > > > ---
> > > >  arch/arm/Kconfig                                  |   2 +
> > > >  arch/arm/mach-vexpress/Kconfig                    |   3 -
> > > >  arch/arm/mach-vexpress/Makefile                   |   3 +-
> > > >  arch/arm/mach-vexpress/core.h                     |   7 -
> > > >  arch/arm/mach-vexpress/ct-ca9x4.c                 | 212 ------------
> > > >  arch/arm/mach-vexpress/include/mach/ct-ca9x4.h    |  47 ---
> > > >  arch/arm/mach-vexpress/include/mach/hardware.h    |   1 -
> > > >  arch/arm/mach-vexpress/include/mach/irqs.h        |   6 -
> > > >  arch/arm/mach-vexpress/include/mach/motherboard.h |  88 -----
> > > >  arch/arm/mach-vexpress/platsmp.c                  |  42 ---
> > > >  arch/arm/mach-vexpress/v2m.c                      | 374 ----------------------
> > > >  arch/arm/plat-versatile/Kconfig                   |   2 +-
> > > >  drivers/clk/versatile/Makefile                    |   1 -
> > > >  drivers/clk/versatile/clk-vexpress-osc.c          |   7 -
> > > >  drivers/clk/versatile/clk-vexpress.c              |  86 -----
> > > >  drivers/mfd/vexpress-sysreg.c                     |  71 +---
> > > >  drivers/misc/vexpress-syscfg.c                    |  60 +---
> > > >  drivers/power/reset/vexpress-poweroff.c           |  17 +-
> > > >  include/linux/vexpress.h                          |  19 --
> > > >  19 files changed, 35 insertions(+), 1013 deletions(-)
> > > >  delete mode 100644 arch/arm/mach-vexpress/ct-ca9x4.c
> > > >  delete mode 100644 arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
> > > >  delete mode 100644 arch/arm/mach-vexpress/include/mach/hardware.h
> > > >  delete mode 100644 arch/arm/mach-vexpress/include/mach/irqs.h
> > > >  delete mode 100644 arch/arm/mach-vexpress/include/mach/motherboard.h
> > > >  delete mode 100644 drivers/clk/versatile/clk-vexpress.c
> > > 
> > > Is it really necessary to take the one-big-patch approach?  I'm sure
> > > you can find a nicer way than to burden all these maintainers.
> > > Naturally I can't speak for everyone concerned, but I don't really
> > > want to be carrying all this if I don't have to.  Granted I'm not
> > > carrying any patches touching drivers/mfd/vexpress-sysreg.c at the
> > > moment, but equally I don't want to rule that out.
> > 
> > I feel that getting all this stuff done (notice: no new features, just
> > removing existing stuff) was the simplest approach, without having to
> > rely on patches being merged in particular order.
> > 
> > Besides, there are three things there that are not directly maintained
> > by the arm-soc folk: clk (already acked by Mike), mfd (you) and
> > power/reset. So I thought that gathering acks for those and getting it
> > merged via arm-soc would be the simplest approach...
> 
> It's certainly the easiest approach for you, but it makes things
> difficult for the maintainers as it would entail all 4 entities
> carrying the patch.  The alternative is to hope there won't be any
> subsequent changes to the files in our respective subsystems which
> might cause conflicts.  I'm not keen on the latter idea.

No problem, I will factor out the mfd and reset stuff and post it
separately after the main changes are merged.

Pawel
Pawel Moll Sept. 17, 2014, 4:11 p.m. UTC | #9
On Wed, 2014-09-17 at 16:27 +0100, Russell King - ARM Linux wrote:
> On Wed, Sep 10, 2014 at 04:40:57PM +0100, Pawel Moll wrote:
> > On Wed, 2014-09-10 at 15:58 +0100, Russell King - ARM Linux wrote:
> > > So, I'll then be asking ARM to provide updated instructions on how to
> > > boot the CT9x4 with DT... 
> 
> Let me repeat: a boot loader with network booting capability is an
> absolute necessity for me.  This is *required* for unattended boots of
> kernels which have just been built.  If a platform doesn't have this
> capability, I'm just not interested in it, and I _will_ not use it.  It
> really is that simple.
> 
> My position on the boot loader issue is not going to change; it's a
> fundamental requirement for automatic build and boot testing, and for
> efficient workflow at other times.

I understand.

As Boot Monitor is not going to do TFTP in foreseeable future, the
"compat" approach of glueing zImage with dtb is a potential solution.

I've just tested a build with CONFIG_ARM_ATAG_DTB_COMPAT=y and
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y - after cat-ing
arch/arm/boot/zImage with arch/arm/boot/dts/vexpress-v2p-ca9.dtb
everything worked fine, booting with a root filesystem on a MMC card.

Of course I tried this with Boot Monitor, but I would hope that it will
work with uboot without any problem as well.

Pawel
Lee Jones Sept. 17, 2014, 4:54 p.m. UTC | #10
On Wed, 17 Sep 2014, Pawel Moll wrote:

> On Wed, 2014-09-17 at 16:42 +0100, Lee Jones wrote:
> > On Wed, 17 Sep 2014, Pawel Moll wrote:
> > > On Wed, 2014-09-17 at 00:30 +0100, Lee Jones wrote:
> > > > On Wed, 10 Sep 2014, Pawel Moll wrote:
> > > > 
> > > > > Now, with the CLCD DT support available, there is no
> > > > > more reason to keep the non-DT support for V2P-CA9.
> > > > > 
> > > > > Removed, together with "some" supporting code. It was
> > > > > necessary to make PLAT_VERSATILE_SCHED_CLOCK optional
> > > > > and selected by the machines still interested in it.
> > > > > 
> > > > > Signed-off-by: Pawel Moll <pawel.moll@arm.com>
> > > > > ---
> > > > >  arch/arm/Kconfig                                  |   2 +
> > > > >  arch/arm/mach-vexpress/Kconfig                    |   3 -
> > > > >  arch/arm/mach-vexpress/Makefile                   |   3 +-
> > > > >  arch/arm/mach-vexpress/core.h                     |   7 -
> > > > >  arch/arm/mach-vexpress/ct-ca9x4.c                 | 212 ------------
> > > > >  arch/arm/mach-vexpress/include/mach/ct-ca9x4.h    |  47 ---
> > > > >  arch/arm/mach-vexpress/include/mach/hardware.h    |   1 -
> > > > >  arch/arm/mach-vexpress/include/mach/irqs.h        |   6 -
> > > > >  arch/arm/mach-vexpress/include/mach/motherboard.h |  88 -----
> > > > >  arch/arm/mach-vexpress/platsmp.c                  |  42 ---
> > > > >  arch/arm/mach-vexpress/v2m.c                      | 374 ----------------------
> > > > >  arch/arm/plat-versatile/Kconfig                   |   2 +-
> > > > >  drivers/clk/versatile/Makefile                    |   1 -
> > > > >  drivers/clk/versatile/clk-vexpress-osc.c          |   7 -
> > > > >  drivers/clk/versatile/clk-vexpress.c              |  86 -----
> > > > >  drivers/mfd/vexpress-sysreg.c                     |  71 +---
> > > > >  drivers/misc/vexpress-syscfg.c                    |  60 +---
> > > > >  drivers/power/reset/vexpress-poweroff.c           |  17 +-
> > > > >  include/linux/vexpress.h                          |  19 --
> > > > >  19 files changed, 35 insertions(+), 1013 deletions(-)
> > > > >  delete mode 100644 arch/arm/mach-vexpress/ct-ca9x4.c
> > > > >  delete mode 100644 arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
> > > > >  delete mode 100644 arch/arm/mach-vexpress/include/mach/hardware.h
> > > > >  delete mode 100644 arch/arm/mach-vexpress/include/mach/irqs.h
> > > > >  delete mode 100644 arch/arm/mach-vexpress/include/mach/motherboard.h
> > > > >  delete mode 100644 drivers/clk/versatile/clk-vexpress.c
> > > > 
> > > > Is it really necessary to take the one-big-patch approach?  I'm sure
> > > > you can find a nicer way than to burden all these maintainers.
> > > > Naturally I can't speak for everyone concerned, but I don't really
> > > > want to be carrying all this if I don't have to.  Granted I'm not
> > > > carrying any patches touching drivers/mfd/vexpress-sysreg.c at the
> > > > moment, but equally I don't want to rule that out.
> > > 
> > > I feel that getting all this stuff done (notice: no new features, just
> > > removing existing stuff) was the simplest approach, without having to
> > > rely on patches being merged in particular order.
> > > 
> > > Besides, there are three things there that are not directly maintained
> > > by the arm-soc folk: clk (already acked by Mike), mfd (you) and
> > > power/reset. So I thought that gathering acks for those and getting it
> > > merged via arm-soc would be the simplest approach...
> > 
> > It's certainly the easiest approach for you, but it makes things
> > difficult for the maintainers as it would entail all 4 entities
> > carrying the patch.  The alternative is to hope there won't be any
> > subsequent changes to the files in our respective subsystems which
> > might cause conflicts.  I'm not keen on the latter idea.
> 
> No problem, I will factor out the mfd and reset stuff and post it
> separately after the main changes are merged.

Thanks Pawel.
Nicolas Pitre Sept. 18, 2014, 1:04 a.m. UTC | #11
On Wed, 17 Sep 2014, Russell King - ARM Linux wrote:

> As for TC2, I just don't bother with that.  It's really not worth the
> hastle.  I asked for help with that and got almost nothing.  Yes, there's
> Nicolas' uboot, which solves some problems, but getting the kernel to
> boot on TC2 turned out to be a dead loss - and no help with it was
> forthcoming.

TC2 is my main development board at the moment and it boots mainline 
perfectly.  If you want I can provide you with a tarball of everything 
you need to boot it, including my setup script and compiled kernel, to 
get you started.


Nicolas
Russell King - ARM Linux Sept. 18, 2014, 7:57 a.m. UTC | #12
On Wed, Sep 17, 2014 at 09:04:54PM -0400, Nicolas Pitre wrote:
> On Wed, 17 Sep 2014, Russell King - ARM Linux wrote:
> 
> > As for TC2, I just don't bother with that.  It's really not worth the
> > hastle.  I asked for help with that and got almost nothing.  Yes, there's
> > Nicolas' uboot, which solves some problems, but getting the kernel to
> > boot on TC2 turned out to be a dead loss - and no help with it was
> > forthcoming.
> 
> TC2 is my main development board at the moment and it boots mainline 
> perfectly.  If you want I can provide you with a tarball of everything 
> you need to boot it, including my setup script and compiled kernel, to 
> get you started.

Well, right now I have a slightly different view, because of the work on
the FIQ stuff.

We currently have the situation where the GIC on CT9x4 appears to be
different from other GICs, in that group 1 interrupts are never
delivered.  As the GIC is indistinguishable from working parts, this
currently squarely puts the Daniel's KGDB FIQ work, and work to use
FIQ for dumping backtraces in the case of a spinlock lockup beyond the
reach of the kernel right now, and nothing more than a local hack.

So, until we get to the bottom of this, I need Versatile Express support
to stay as-is, so there's no extraneous variables in the platform.  That
means right now I need the legacy stuff to stay as switching to DT will
add a huge variable into what's going on.
Pawel Moll Sept. 18, 2014, 9:19 a.m. UTC | #13
On Thu, 2014-09-18 at 08:57 +0100, Russell King - ARM Linux wrote:
> So, until we get to the bottom of this, I need Versatile Express support
> to stay as-is, so there's no extraneous variables in the platform.  That
> means right now I need the legacy stuff to stay as switching to DT will
> add a huge variable into what's going on.

No problem, this patch can wait till 3.19.

Pawel
Nicolas Pitre Sept. 18, 2014, 5:17 p.m. UTC | #14
On Thu, 18 Sep 2014, Russell King - ARM Linux wrote:

> On Wed, Sep 17, 2014 at 09:04:54PM -0400, Nicolas Pitre wrote:
> > On Wed, 17 Sep 2014, Russell King - ARM Linux wrote:
> > 
> > > As for TC2, I just don't bother with that.  It's really not worth the
> > > hastle.  I asked for help with that and got almost nothing.  Yes, there's
> > > Nicolas' uboot, which solves some problems, but getting the kernel to
> > > boot on TC2 turned out to be a dead loss - and no help with it was
> > > forthcoming.
> > 
> > TC2 is my main development board at the moment and it boots mainline 
> > perfectly.  If you want I can provide you with a tarball of everything 
> > you need to boot it, including my setup script and compiled kernel, to 
> > get you started.
> 
> Well, right now I have a slightly different view, because of the work on
> the FIQ stuff.
> 
> We currently have the situation where the GIC on CT9x4 appears to be
> different from other GICs, in that group 1 interrupts are never
> delivered.  As the GIC is indistinguishable from working parts, this
> currently squarely puts the Daniel's KGDB FIQ work, and work to use
> FIQ for dumping backtraces in the case of a spinlock lockup beyond the
> reach of the kernel right now, and nothing more than a local hack.
> 
> So, until we get to the bottom of this, I need Versatile Express support
> to stay as-is, so there's no extraneous variables in the platform.  That
> means right now I need the legacy stuff to stay as switching to DT will
> add a huge variable into what's going on.


No problem -- I'm just offering kickstart help whenever you wish to make 
your TC2 useful beyond a doorstop.


Nicolas
diff mbox

Patch

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 32cbbd5..32d5b2f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -347,6 +347,7 @@  config ARCH_REALVIEW
 	select ICST
 	select NEED_MACH_MEMORY_H
 	select PLAT_VERSATILE
+	select PLAT_VERSATILE_SCHED_CLOCK
 	help
 	  This enables support for ARM Ltd RealView boards.
 
@@ -362,6 +363,7 @@  config ARCH_VERSATILE
 	select ICST
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_CLOCK
+	select PLAT_VERSATILE_SCHED_CLOCK
 	select VERSATILE_FPGA_IRQ
 	help
 	  This enables support for ARM Ltd Versatile board.
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index b2cfba16c..9a96bab 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -49,9 +49,6 @@  config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
 	  build a working kernel, you must also enable relevant core
 	  tile support or Flattened Device Tree based support options.
 
-config ARCH_VEXPRESS_CA9X4
-	bool "Versatile Express Cortex-A9x4 tile"
-
 config ARCH_VEXPRESS_DCSCB
 	bool "Dual Cluster System Control Block (DCSCB) support"
 	depends on MCPM
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index fc649bc..f5c1006 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -1,11 +1,10 @@ 
 #
 # Makefile for the linux kernel.
 #
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := \
 	-I$(srctree)/arch/arm/plat-versatile/include
 
 obj-y					:= v2m.o
-obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
 obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
 CFLAGS_dcscb.o				+= -march=armv7-a
 CFLAGS_REMOVE_dcscb.o			= -pg
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index 152fad9..2a11d3a 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -1,12 +1,5 @@ 
-/* 2MB large area for motherboard's peripherals static mapping */
-#define V2M_PERIPH 0xf8000000
-
-/* Tile's peripherals static mappings should start here */
-#define V2T_PERIPH 0xf8200000
-
 bool vexpress_smp_init_ops(void);
 
-extern struct smp_operations	vexpress_smp_ops;
 extern struct smp_operations	vexpress_smp_dt_ops;
 
 extern void vexpress_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
deleted file mode 100644
index 27bea04..0000000
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ /dev/null
@@ -1,212 +0,0 @@ 
-/*
- * Versatile Express Core Tile Cortex A9x4 Support
- */
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
-#include <linux/clkdev.h>
-#include <linux/vexpress.h>
-#include <linux/irqchip/arm-gic.h>
-
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/smp_scu.h>
-#include <asm/smp_twd.h>
-
-#include <mach/ct-ca9x4.h>
-
-#include <asm/hardware/timer-sp.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "core.h"
-
-#include <mach/motherboard.h>
-#include <mach/irqs.h>
-
-static struct map_desc ct_ca9x4_io_desc[] __initdata = {
-	{
-		.virtual        = V2T_PERIPH,
-		.pfn            = __phys_to_pfn(CT_CA9X4_MPIC),
-		.length         = SZ_8K,
-		.type           = MT_DEVICE,
-	},
-};
-
-static void __init ct_ca9x4_map_io(void)
-{
-	iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
-}
-
-static void __init ca9x4_l2_init(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
-
-	if (l2x0_base) {
-		/* set RAM latencies to 1 cycle for this core tile. */
-		writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
-		writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
-
-		l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
-	} else {
-		pr_err("L2C: unable to map L2 cache controller\n");
-	}
-#endif
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER);
-
-static void __init ca9x4_twd_init(void)
-{
-	int err = twd_local_timer_register(&twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define ca9x4_twd_init()	do {} while(0)
-#endif
-
-static void __init ct_ca9x4_init_irq(void)
-{
-	gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
-		 ioremap(A9_MPCORE_GIC_CPU, SZ_256));
-	ca9x4_twd_init();
-	ca9x4_l2_init();
-}
-
-static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
-{
-	unsigned long framesize = 1024 * 768 * 2;
-
-	fb->panel = versatile_clcd_get_panel("XVGA");
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, framesize);
-}
-
-static struct clcd_board ct_ca9x4_clcd_data = {
-	.name		= "CT-CA9X4",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_565,
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.setup		= ct_ca9x4_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
-static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
-static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
-static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
-
-static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
-	&clcd_device,
-	&dmc_device,
-	&smc_device,
-	&gpio_device,
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start	= IRQ_CT_CA9X4_PMU_CPU0,
-		.end	= IRQ_CT_CA9X4_PMU_CPU0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= IRQ_CT_CA9X4_PMU_CPU1,
-		.end	= IRQ_CT_CA9X4_PMU_CPU1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_CT_CA9X4_PMU_CPU2,
-		.end	= IRQ_CT_CA9X4_PMU_CPU2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= IRQ_CT_CA9X4_PMU_CPU3,
-		.end	= IRQ_CT_CA9X4_PMU_CPU3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name		= "arm-pmu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pmu_resources),
-	.resource	= pmu_resources,
-};
-
-static struct clk_lookup osc1_lookup = {
-	.dev_id		= "ct:clcd",
-};
-
-static struct platform_device osc1_device = {
-	.name		= "vexpress-osc",
-	.id		= 1,
-	.num_resources	= 1,
-	.resource	= (struct resource []) {
-		VEXPRESS_RES_FUNC(0xf, 1),
-	},
-	.dev.platform_data = &osc1_lookup,
-};
-
-static void __init ct_ca9x4_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
-		amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
-
-	platform_device_register(&pmu_device);
-	vexpress_syscfg_device_register(&osc1_device);
-}
-
-#ifdef CONFIG_SMP
-static void *ct_ca9x4_scu_base __initdata;
-
-static void __init ct_ca9x4_init_cpu_map(void)
-{
-	int i, ncores;
-
-	ct_ca9x4_scu_base = ioremap(A9_MPCORE_SCU, SZ_128);
-	if (WARN_ON(!ct_ca9x4_scu_base))
-		return;
-
-	ncores = scu_get_core_count(ct_ca9x4_scu_base);
-
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; ++i)
-		set_cpu_possible(i, true);
-}
-
-static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
-{
-	scu_enable(ct_ca9x4_scu_base);
-}
-#endif
-
-struct ct_desc ct_ca9x4_desc __initdata = {
-	.id		= V2M_CT_ID_CA9,
-	.name		= "CA9x4",
-	.map_io		= ct_ca9x4_map_io,
-	.init_irq	= ct_ca9x4_init_irq,
-	.init_tile	= ct_ca9x4_init,
-#ifdef CONFIG_SMP
-	.init_cpu_map	= ct_ca9x4_init_cpu_map,
-	.smp_enable	= ct_ca9x4_smp_enable,
-#endif
-};
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
deleted file mode 100644
index 84acf84..0000000
--- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
+++ /dev/null
@@ -1,47 +0,0 @@ 
-#ifndef __MACH_CT_CA9X4_H
-#define __MACH_CT_CA9X4_H
-
-/*
- * Physical base addresses
- */
-#define CT_CA9X4_CLCDC		(0x10020000)
-#define CT_CA9X4_AXIRAM		(0x10060000)
-#define CT_CA9X4_DMC		(0x100e0000)
-#define CT_CA9X4_SMC		(0x100e1000)
-#define CT_CA9X4_SCC		(0x100e2000)
-#define CT_CA9X4_SP804_TIMER	(0x100e4000)
-#define CT_CA9X4_SP805_WDT	(0x100e5000)
-#define CT_CA9X4_TZPC		(0x100e6000)
-#define CT_CA9X4_GPIO		(0x100e8000)
-#define CT_CA9X4_FASTAXI	(0x100e9000)
-#define CT_CA9X4_SLOWAXI	(0x100ea000)
-#define CT_CA9X4_TZASC		(0x100ec000)
-#define CT_CA9X4_CORESIGHT	(0x10200000)
-#define CT_CA9X4_MPIC		(0x1e000000)
-#define CT_CA9X4_SYSTIMER	(0x1e004000)
-#define CT_CA9X4_SYSWDT		(0x1e007000)
-#define CT_CA9X4_L2CC		(0x1e00a000)
-
-#define A9_MPCORE_SCU		(CT_CA9X4_MPIC + 0x0000)
-#define A9_MPCORE_GIC_CPU	(CT_CA9X4_MPIC + 0x0100)
-#define A9_MPCORE_GIT		(CT_CA9X4_MPIC + 0x0200)
-#define A9_MPCORE_TWD		(CT_CA9X4_MPIC + 0x0600)
-#define A9_MPCORE_GIC_DIST	(CT_CA9X4_MPIC + 0x1000)
-
-/*
- * Interrupts.  Those in {} are for AMBA devices
- */
-#define IRQ_CT_CA9X4_CLCDC	{ 76 }
-#define IRQ_CT_CA9X4_DMC	{ 0 }
-#define IRQ_CT_CA9X4_SMC	{ 77, 78 }
-#define IRQ_CT_CA9X4_TIMER0	80
-#define IRQ_CT_CA9X4_TIMER1	81
-#define IRQ_CT_CA9X4_GPIO	{ 82 }
-#define IRQ_CT_CA9X4_PMU_CPU0	92
-#define IRQ_CT_CA9X4_PMU_CPU1	93
-#define IRQ_CT_CA9X4_PMU_CPU2	94
-#define IRQ_CT_CA9X4_PMU_CPU3	95
-
-extern struct ct_desc ct_ca9x4_desc;
-
-#endif
diff --git a/arch/arm/mach-vexpress/include/mach/hardware.h b/arch/arm/mach-vexpress/include/mach/hardware.h
deleted file mode 100644
index 40a8c17..0000000
--- a/arch/arm/mach-vexpress/include/mach/hardware.h
+++ /dev/null
@@ -1 +0,0 @@ 
-/* empty */
diff --git a/arch/arm/mach-vexpress/include/mach/irqs.h b/arch/arm/mach-vexpress/include/mach/irqs.h
deleted file mode 100644
index f8f7f78..0000000
--- a/arch/arm/mach-vexpress/include/mach/irqs.h
+++ /dev/null
@@ -1,6 +0,0 @@ 
-#define IRQ_LOCALTIMER		29
-#define IRQ_LOCALWDOG		30
-
-#ifndef CONFIG_SPARSE_IRQ
-#define NR_IRQS	256
-#endif
diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h
deleted file mode 100644
index 68abc8b..0000000
--- a/arch/arm/mach-vexpress/include/mach/motherboard.h
+++ /dev/null
@@ -1,88 +0,0 @@ 
-#ifndef __MACH_MOTHERBOARD_H
-#define __MACH_MOTHERBOARD_H
-
-/*
- * Physical addresses, offset from V2M_PA_CS0-3
- */
-#define V2M_NOR0		(V2M_PA_CS0)
-#define V2M_NOR1		(V2M_PA_CS1)
-#define V2M_SRAM		(V2M_PA_CS2)
-#define V2M_VIDEO_SRAM		(V2M_PA_CS3 + 0x00000000)
-#define V2M_LAN9118		(V2M_PA_CS3 + 0x02000000)
-#define V2M_ISP1761		(V2M_PA_CS3 + 0x03000000)
-
-/*
- * Physical addresses, offset from V2M_PA_CS7
- */
-#define V2M_SYSREGS		(V2M_PA_CS7 + 0x00000000)
-#define V2M_SYSCTL		(V2M_PA_CS7 + 0x00001000)
-#define V2M_SERIAL_BUS_PCI	(V2M_PA_CS7 + 0x00002000)
-
-#define V2M_AACI		(V2M_PA_CS7 + 0x00004000)
-#define V2M_MMCI		(V2M_PA_CS7 + 0x00005000)
-#define V2M_KMI0		(V2M_PA_CS7 + 0x00006000)
-#define V2M_KMI1		(V2M_PA_CS7 + 0x00007000)
-
-#define V2M_UART0		(V2M_PA_CS7 + 0x00009000)
-#define V2M_UART1		(V2M_PA_CS7 + 0x0000a000)
-#define V2M_UART2		(V2M_PA_CS7 + 0x0000b000)
-#define V2M_UART3		(V2M_PA_CS7 + 0x0000c000)
-
-#define V2M_WDT			(V2M_PA_CS7 + 0x0000f000)
-
-#define V2M_TIMER01		(V2M_PA_CS7 + 0x00011000)
-#define V2M_TIMER23		(V2M_PA_CS7 + 0x00012000)
-
-#define V2M_SERIAL_BUS_DVI	(V2M_PA_CS7 + 0x00016000)
-#define V2M_RTC			(V2M_PA_CS7 + 0x00017000)
-
-#define V2M_CF			(V2M_PA_CS7 + 0x0001a000)
-#define V2M_CLCD		(V2M_PA_CS7 + 0x0001f000)
-
-
-/*
- * Interrupts.  Those in {} are for AMBA devices
- */
-#define IRQ_V2M_WDT		{ (32 + 0) }
-#define IRQ_V2M_TIMER0		(32 + 2)
-#define IRQ_V2M_TIMER1		(32 + 2)
-#define IRQ_V2M_TIMER2		(32 + 3)
-#define IRQ_V2M_TIMER3		(32 + 3)
-#define IRQ_V2M_RTC		{ (32 + 4) }
-#define IRQ_V2M_UART0		{ (32 + 5) }
-#define IRQ_V2M_UART1		{ (32 + 6) }
-#define IRQ_V2M_UART2		{ (32 + 7) }
-#define IRQ_V2M_UART3		{ (32 + 8) }
-#define IRQ_V2M_MMCI		{ (32 + 9), (32 + 10) }
-#define IRQ_V2M_AACI		{ (32 + 11) }
-#define IRQ_V2M_KMI0		{ (32 + 12) }
-#define IRQ_V2M_KMI1		{ (32 + 13) }
-#define IRQ_V2M_CLCD		{ (32 + 14) }
-#define IRQ_V2M_LAN9118		(32 + 15)
-#define IRQ_V2M_ISP1761		(32 + 16)
-#define IRQ_V2M_PCIE		(32 + 17)
-
-
-/*
- * Core tile IDs
- */
-#define V2M_CT_ID_CA9		0x0c000191
-#define V2M_CT_ID_UNSUPPORTED	0xff000191
-#define V2M_CT_ID_MASK		0xff000fff
-
-struct ct_desc {
-	u32			id;
-	const char		*name;
-	void			(*map_io)(void);
-	void			(*init_early)(void);
-	void			(*init_irq)(void);
-	void			(*init_tile)(void);
-#ifdef CONFIG_SMP
-	void			(*init_cpu_map)(void);
-	void			(*smp_enable)(unsigned int);
-#endif
-};
-
-extern struct ct_desc *ct_desc;
-
-#endif
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index a1f3804..83188cf 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -19,48 +19,10 @@ 
 #include <asm/smp_scu.h>
 #include <asm/mach/map.h>
 
-#include <mach/motherboard.h>
-
 #include <plat/platsmp.h>
 
 #include "core.h"
 
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init vexpress_smp_init_cpus(void)
-{
-	ct_desc->init_cpu_map();
-}
-
-static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
-{
-	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
-	 */
-	ct_desc->smp_enable(max_cpus);
-
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The boot monitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
-}
-
-struct smp_operations __initdata vexpress_smp_ops = {
-	.smp_init_cpus		= vexpress_smp_init_cpus,
-	.smp_prepare_cpus	= vexpress_smp_prepare_cpus,
-	.smp_secondary_init	= versatile_secondary_init,
-	.smp_boot_secondary	= versatile_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die		= vexpress_cpu_die,
-#endif
-};
-
 bool __init vexpress_smp_init_ops(void)
 {
 #ifdef CONFIG_MCPM
@@ -79,8 +41,6 @@  bool __init vexpress_smp_init_ops(void)
 	return false;
 }
 
-#if defined(CONFIG_OF)
-
 static const struct of_device_id vexpress_smp_dt_scu_match[] __initconst = {
 	{ .compatible = "arm,cortex-a5-scu", },
 	{ .compatible = "arm,cortex-a9-scu", },
@@ -112,5 +72,3 @@  struct smp_operations __initdata vexpress_smp_dt_ops = {
 	.cpu_die		= vexpress_cpu_die,
 #endif
 };
-
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 6ff681a..a0400f4 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -1,380 +1,7 @@ 
-/*
- * Versatile Express V2M Motherboard Support
- */
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/io.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/smsc911x.h>
-#include <linux/spinlock.h>
-#include <linux/usb/isp1760.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/vexpress.h>
-#include <linux/clkdev.h>
-
-#include <asm/mach-types.h>
-#include <asm/sizes.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/timer-sp.h>
-
-#include <mach/ct-ca9x4.h>
-#include <mach/motherboard.h>
-
-#include <plat/sched_clock.h>
-#include <plat/platsmp.h>
 
 #include "core.h"
 
-#define V2M_PA_CS0	0x40000000
-#define V2M_PA_CS1	0x44000000
-#define V2M_PA_CS2	0x48000000
-#define V2M_PA_CS3	0x4c000000
-#define V2M_PA_CS7	0x10000000
-
-static struct map_desc v2m_io_desc[] __initdata = {
-	{
-		.virtual	= V2M_PERIPH,
-		.pfn		= __phys_to_pfn(V2M_PA_CS7),
-		.length		= SZ_128K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
-{
-	if (WARN_ON(!base || irq == NO_IRQ))
-		return;
-
-	sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1");
-	sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0");
-}
-
-
-static struct resource v2m_pcie_i2c_resource = {
-	.start	= V2M_SERIAL_BUS_PCI,
-	.end	= V2M_SERIAL_BUS_PCI + SZ_4K - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device v2m_pcie_i2c_device = {
-	.name		= "versatile-i2c",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &v2m_pcie_i2c_resource,
-};
-
-static struct resource v2m_ddc_i2c_resource = {
-	.start	= V2M_SERIAL_BUS_DVI,
-	.end	= V2M_SERIAL_BUS_DVI + SZ_4K - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device v2m_ddc_i2c_device = {
-	.name		= "versatile-i2c",
-	.id		= 1,
-	.num_resources	= 1,
-	.resource	= &v2m_ddc_i2c_resource,
-};
-
-static struct resource v2m_eth_resources[] = {
-	{
-		.start	= V2M_LAN9118,
-		.end	= V2M_LAN9118 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_V2M_LAN9118,
-		.end	= IRQ_V2M_LAN9118,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config v2m_eth_config = {
-	.flags		= SMSC911X_USE_32BIT,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device v2m_eth_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.resource	= v2m_eth_resources,
-	.num_resources	= ARRAY_SIZE(v2m_eth_resources),
-	.dev.platform_data = &v2m_eth_config,
-};
-
-static struct regulator_consumer_supply v2m_eth_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource v2m_usb_resources[] = {
-	{
-		.start	= V2M_ISP1761,
-		.end	= V2M_ISP1761 + SZ_128K - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_V2M_ISP1761,
-		.end	= IRQ_V2M_ISP1761,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct isp1760_platform_data v2m_usb_config = {
-	.is_isp1761		= true,
-	.bus_width_16		= false,
-	.port1_otg		= true,
-	.analog_oc		= false,
-	.dack_polarity_high	= false,
-	.dreq_polarity_high	= false,
-};
-
-static struct platform_device v2m_usb_device = {
-	.name		= "isp1760",
-	.id		= -1,
-	.resource	= v2m_usb_resources,
-	.num_resources	= ARRAY_SIZE(v2m_usb_resources),
-	.dev.platform_data = &v2m_usb_config,
-};
-
-static struct physmap_flash_data v2m_flash_data = {
-	.width		= 4,
-};
-
-static struct resource v2m_flash_resources[] = {
-	{
-		.start	= V2M_NOR0,
-		.end	= V2M_NOR0 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= V2M_NOR1,
-		.end	= V2M_NOR1 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device v2m_flash_device = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= v2m_flash_resources,
-	.num_resources	= ARRAY_SIZE(v2m_flash_resources),
-	.dev.platform_data = &v2m_flash_data,
-};
-
-static struct pata_platform_info v2m_pata_data = {
-	.ioport_shift	= 2,
-};
-
-static struct resource v2m_pata_resources[] = {
-	{
-		.start	= V2M_CF,
-		.end	= V2M_CF + 0xff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= V2M_CF + 0x100,
-		.end	= V2M_CF + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device v2m_cf_device = {
-	.name		= "pata_platform",
-	.id		= -1,
-	.resource	= v2m_pata_resources,
-	.num_resources	= ARRAY_SIZE(v2m_pata_resources),
-	.dev.platform_data = &v2m_pata_data,
-};
-
-static struct mmci_platform_data v2m_mmci_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= vexpress_get_mci_cardin,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-};
-
-static struct resource v2m_sysreg_resources[] = {
-	{
-		.start	= V2M_SYSREGS,
-		.end	= V2M_SYSREGS + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device v2m_sysreg_device = {
-	.name		= "vexpress-sysreg",
-	.id		= -1,
-	.resource	= v2m_sysreg_resources,
-	.num_resources	= ARRAY_SIZE(v2m_sysreg_resources),
-};
-
-static struct platform_device v2m_muxfpga_device = {
-	.name		= "vexpress-muxfpga",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= (struct resource []) {
-		VEXPRESS_RES_FUNC(0, 7),
-	}
-};
-
-static struct platform_device v2m_shutdown_device = {
-	.name		= "vexpress-shutdown",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= (struct resource []) {
-		VEXPRESS_RES_FUNC(0, 8),
-	}
-};
-
-static struct platform_device v2m_reboot_device = {
-	.name		= "vexpress-reboot",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= (struct resource []) {
-		VEXPRESS_RES_FUNC(0, 9),
-	}
-};
-
-static struct platform_device v2m_dvimode_device = {
-	.name		= "vexpress-dvimode",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= (struct resource []) {
-		VEXPRESS_RES_FUNC(0, 11),
-	}
-};
-
-static AMBA_APB_DEVICE(aaci,  "mb:aaci",  0, V2M_AACI, IRQ_V2M_AACI, NULL);
-static AMBA_APB_DEVICE(mmci,  "mb:mmci",  0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
-static AMBA_APB_DEVICE(kmi0,  "mb:kmi0",  0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
-static AMBA_APB_DEVICE(kmi1,  "mb:kmi1",  0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
-static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
-static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
-static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
-static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
-static AMBA_APB_DEVICE(wdt,   "mb:wdt",   0, V2M_WDT, IRQ_V2M_WDT, NULL);
-static AMBA_APB_DEVICE(rtc,   "mb:rtc",   0, V2M_RTC, IRQ_V2M_RTC, NULL);
-
-static struct amba_device *v2m_amba_devs[] __initdata = {
-	&aaci_device,
-	&mmci_device,
-	&kmi0_device,
-	&kmi1_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&wdt_device,
-	&rtc_device,
-};
-
-static void __init v2m_timer_init(void)
-{
-	vexpress_clk_init(ioremap(V2M_SYSCTL, SZ_4K));
-	v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
-}
-
-static void __init v2m_init_early(void)
-{
-	if (ct_desc->init_early)
-		ct_desc->init_early();
-	versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
-}
-
-struct ct_desc *ct_desc;
-
-static struct ct_desc *ct_descs[] __initdata = {
-#ifdef CONFIG_ARCH_VEXPRESS_CA9X4
-	&ct_ca9x4_desc,
-#endif
-};
-
-static void __init v2m_populate_ct_desc(void)
-{
-	int i;
-	u32 current_tile_id;
-
-	ct_desc = NULL;
-	current_tile_id = vexpress_get_procid(VEXPRESS_SITE_MASTER)
-				& V2M_CT_ID_MASK;
-
-	for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i)
-		if (ct_descs[i]->id == current_tile_id)
-			ct_desc = ct_descs[i];
-
-	if (!ct_desc)
-		panic("vexpress: this kernel does not support core tile ID 0x%08x when booting via ATAGs.\n"
-		      "You may need a device tree blob or a different kernel to boot on this board.\n",
-		      current_tile_id);
-}
-
-static void __init v2m_map_io(void)
-{
-	iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
-	vexpress_sysreg_early_init(ioremap(V2M_SYSREGS, SZ_4K));
-	v2m_populate_ct_desc();
-	ct_desc->map_io();
-}
-
-static void __init v2m_init_irq(void)
-{
-	ct_desc->init_irq();
-}
-
-static void __init v2m_init(void)
-{
-	int i;
-
-	regulator_register_fixed(0, v2m_eth_supplies,
-			ARRAY_SIZE(v2m_eth_supplies));
-
-	platform_device_register(&v2m_sysreg_device);
-	platform_device_register(&v2m_pcie_i2c_device);
-	platform_device_register(&v2m_ddc_i2c_device);
-	platform_device_register(&v2m_flash_device);
-	platform_device_register(&v2m_cf_device);
-	platform_device_register(&v2m_eth_device);
-	platform_device_register(&v2m_usb_device);
-
-	for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
-		amba_device_register(v2m_amba_devs[i], &iomem_resource);
-
-	vexpress_syscfg_device_register(&v2m_muxfpga_device);
-	vexpress_syscfg_device_register(&v2m_shutdown_device);
-	vexpress_syscfg_device_register(&v2m_reboot_device);
-	vexpress_syscfg_device_register(&v2m_dvimode_device);
-
-	ct_desc->init_tile();
-}
-
-MACHINE_START(VEXPRESS, "ARM-Versatile Express")
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(vexpress_smp_ops),
-	.map_io		= v2m_map_io,
-	.init_early	= v2m_init_early,
-	.init_irq	= v2m_init_irq,
-	.init_time	= v2m_timer_init,
-	.init_machine	= v2m_init,
-MACHINE_END
-
-static void __init v2m_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char * const v2m_dt_match[] __initconst = {
 	"arm,vexpress",
 	NULL,
@@ -386,5 +13,4 @@  DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
 	.l2c_aux_mask	= 0xfe0fffff,
 	.smp		= smp_ops(vexpress_smp_dt_ops),
 	.smp_init	= smp_init_ops(vexpress_smp_init_ops),
-	.init_machine	= v2m_dt_init,
 MACHINE_END
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index a301ca2..49b8ef9 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -4,6 +4,6 @@  config PLAT_VERSATILE_CLOCK
 	bool
 
 config PLAT_VERSATILE_SCHED_CLOCK
-	def_bool y
+	bool
 
 endif
diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
index 162e519..8ff0374 100644
--- a/drivers/clk/versatile/Makefile
+++ b/drivers/clk/versatile/Makefile
@@ -2,6 +2,5 @@ 
 obj-$(CONFIG_ICST)		+= clk-icst.o clk-versatile.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)	+= clk-impd1.o
 obj-$(CONFIG_ARCH_REALVIEW)	+= clk-realview.o
-obj-$(CONFIG_ARCH_VEXPRESS)	+= clk-vexpress.o
 obj-$(CONFIG_CLK_SP810)		+= clk-sp810.o
 obj-$(CONFIG_CLK_VEXPRESS_OSC)	+= clk-vexpress-osc.o
diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c
index 529a59c..765f1e0 100644
--- a/drivers/clk/versatile/clk-vexpress-osc.c
+++ b/drivers/clk/versatile/clk-vexpress-osc.c
@@ -70,7 +70,6 @@  static struct clk_ops vexpress_osc_ops = {
 
 static int vexpress_osc_probe(struct platform_device *pdev)
 {
-	struct clk_lookup *cl = pdev->dev.platform_data; /* Non-DT lookup */
 	struct clk_init_data init;
 	struct vexpress_osc *osc;
 	struct clk *clk;
@@ -106,12 +105,6 @@  static int vexpress_osc_probe(struct platform_device *pdev)
 
 	of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, clk);
 
-	/* Only happens for non-DT cases */
-	if (cl) {
-		cl->clk = clk;
-		clkdev_add(cl);
-	}
-
 	dev_dbg(&pdev->dev, "Registered clock '%s'\n", init.name);
 
 	return 0;
diff --git a/drivers/clk/versatile/clk-vexpress.c b/drivers/clk/versatile/clk-vexpress.c
deleted file mode 100644
index 2d5e1b4..0000000
--- a/drivers/clk/versatile/clk-vexpress.c
+++ /dev/null
@@ -1,86 +0,0 @@ 
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * Copyright (C) 2012 ARM Limited
- */
-
-#include <linux/amba/sp810.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/err.h>
-#include <linux/vexpress.h>
-
-static struct clk *vexpress_sp810_timerclken[4];
-static DEFINE_SPINLOCK(vexpress_sp810_lock);
-
-static void __init vexpress_sp810_init(void __iomem *base)
-{
-	int i;
-
-	if (WARN_ON(!base))
-		return;
-
-	for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) {
-		char name[12];
-		const char *parents[] = {
-			"v2m:refclk32khz", /* REFCLK */
-			"v2m:refclk1mhz" /* TIMCLK */
-		};
-
-		snprintf(name, ARRAY_SIZE(name), "timerclken%d", i);
-
-		vexpress_sp810_timerclken[i] = clk_register_mux(NULL, name,
-				parents, 2, CLK_SET_RATE_NO_REPARENT,
-				base + SCCTRL, SCCTRL_TIMERENnSEL_SHIFT(i), 1,
-				0, &vexpress_sp810_lock);
-
-		if (WARN_ON(IS_ERR(vexpress_sp810_timerclken[i])))
-			break;
-	}
-}
-
-
-static const char * const vexpress_clk_24mhz_periphs[] __initconst = {
-	"mb:uart0", "mb:uart1", "mb:uart2", "mb:uart3",
-	"mb:mmci", "mb:kmi0", "mb:kmi1"
-};
-
-void __init vexpress_clk_init(void __iomem *sp810_base)
-{
-	struct clk *clk;
-	int i;
-
-	clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL,
-			CLK_IS_ROOT, 0);
-	WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL));
-
-	clk = clk_register_fixed_rate(NULL, "v2m:clk_24mhz", NULL,
-			CLK_IS_ROOT, 24000000);
-	for (i = 0; i < ARRAY_SIZE(vexpress_clk_24mhz_periphs); i++)
-		WARN_ON(clk_register_clkdev(clk, NULL,
-				vexpress_clk_24mhz_periphs[i]));
-
-	clk = clk_register_fixed_rate(NULL, "v2m:refclk32khz", NULL,
-			CLK_IS_ROOT, 32768);
-	WARN_ON(clk_register_clkdev(clk, NULL, "v2m:wdt"));
-
-	clk = clk_register_fixed_rate(NULL, "v2m:refclk1mhz", NULL,
-			CLK_IS_ROOT, 1000000);
-
-	vexpress_sp810_init(sp810_base);
-
-	for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++)
-		WARN_ON(clk_set_parent(vexpress_sp810_timerclken[i], clk));
-
-	WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[0],
-				"v2m-timer0", "sp804"));
-	WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[1],
-				"v2m-timer1", "sp804"));
-}
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index 9e21e4f..7147b30 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -47,71 +47,26 @@ 
 #define SYS_HBI_MASK		0xfff
 #define SYS_PROCIDx_HBI_SHIFT	0
 
-#define SYS_MCI_CARDIN		(1 << 0)
-#define SYS_MCI_WPROT		(1 << 1)
-
 #define SYS_MISC_MASTERSITE	(1 << 14)
 
-
-static void __iomem *__vexpress_sysreg_base;
-
-static void __iomem *vexpress_sysreg_base(void)
+void vexpress_flags_set(u32 data)
 {
-	if (!__vexpress_sysreg_base) {
+	static void __iomem *base;
+
+	if (!base) {
 		struct device_node *node = of_find_compatible_node(NULL, NULL,
 				"arm,vexpress-sysreg");
 
-		__vexpress_sysreg_base = of_iomap(node, 0);
+		base = of_iomap(node, 0);
 	}
 
-	WARN_ON(!__vexpress_sysreg_base);
-
-	return __vexpress_sysreg_base;
-}
-
-
-static int vexpress_sysreg_get_master(void)
-{
-	if (readl(vexpress_sysreg_base() + SYS_MISC) & SYS_MISC_MASTERSITE)
-		return VEXPRESS_SITE_DB2;
-
-	return VEXPRESS_SITE_DB1;
-}
-
-void vexpress_flags_set(u32 data)
-{
-	writel(~0, vexpress_sysreg_base() + SYS_FLAGSCLR);
-	writel(data, vexpress_sysreg_base() + SYS_FLAGSSET);
-}
-
-unsigned int vexpress_get_mci_cardin(struct device *dev)
-{
-	return readl(vexpress_sysreg_base() + SYS_MCI) & SYS_MCI_CARDIN;
-}
-
-u32 vexpress_get_procid(int site)
-{
-	if (site == VEXPRESS_SITE_MASTER)
-		site = vexpress_sysreg_get_master();
+	if (WARN_ON(!base))
+		return;
 
-	return readl(vexpress_sysreg_base() + (site == VEXPRESS_SITE_DB1 ?
-			SYS_PROCID0 : SYS_PROCID1));
+	writel(~0, base + SYS_FLAGSCLR);
+	writel(data, base + SYS_FLAGSSET);
 }
 
-void __iomem *vexpress_get_24mhz_clock_base(void)
-{
-	return vexpress_sysreg_base() + SYS_24MHZ;
-}
-
-
-void __init vexpress_sysreg_early_init(void __iomem *base)
-{
-	__vexpress_sysreg_base = base;
-
-	vexpress_config_set_master(vexpress_sysreg_get_master());
-}
-
-
 /* The sysreg block is just a random collection of various functions... */
 
 static struct syscon_platform_data vexpress_sysreg_sys_id_pdata = {
@@ -210,6 +165,7 @@  static int vexpress_sysreg_probe(struct platform_device *pdev)
 	struct resource *mem;
 	void __iomem *base;
 	struct bgpio_chip *mmc_gpio_chip;
+	int master;
 	u32 dt_hbi;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -220,11 +176,14 @@  static int vexpress_sysreg_probe(struct platform_device *pdev)
 	if (!base)
 		return -ENOMEM;
 
-	vexpress_config_set_master(vexpress_sysreg_get_master());
+	master = readl(base + SYS_MISC) & SYS_MISC_MASTERSITE ?
+			VEXPRESS_SITE_DB2 : VEXPRESS_SITE_DB1;
+	vexpress_config_set_master(master);
 
 	/* Confirm board type against DT property, if available */
 	if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) {
-		u32 id = vexpress_get_procid(VEXPRESS_SITE_MASTER);
+		u32 id = readl(base + (master == VEXPRESS_SITE_DB1 ?
+				 SYS_PROCID0 : SYS_PROCID1));
 		u32 hbi = (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK;
 
 		if (WARN_ON(dt_hbi != hbi))
diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c
index b3a8123..c344483 100644
--- a/drivers/misc/vexpress-syscfg.c
+++ b/drivers/misc/vexpress-syscfg.c
@@ -145,7 +145,7 @@  static struct regmap_config vexpress_syscfg_regmap_config = {
 static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
 		void *context)
 {
-	struct platform_device *pdev = to_platform_device(dev);
+	int err;
 	struct vexpress_syscfg *syscfg = context;
 	struct vexpress_syscfg_func *func;
 	struct property *prop;
@@ -155,32 +155,18 @@  static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
 	u32 site, position, dcc;
 	int i;
 
-	if (dev->of_node) {
-		int err = vexpress_config_get_topo(dev->of_node, &site,
+	err = vexpress_config_get_topo(dev->of_node, &site,
 				&position, &dcc);
+	if (err)
+		return ERR_PTR(err);
 
-		if (err)
-			return ERR_PTR(err);
-
-		prop = of_find_property(dev->of_node,
-				"arm,vexpress-sysreg,func", NULL);
-		if (!prop)
-			return ERR_PTR(-EINVAL);
-
-		num = prop->length / sizeof(u32) / 2;
-		val = prop->value;
-	} else {
-		if (pdev->num_resources != 1 ||
-				pdev->resource[0].flags != IORESOURCE_BUS)
-			return ERR_PTR(-EFAULT);
-
-		site = pdev->resource[0].start;
-		if (site == VEXPRESS_SITE_MASTER)
-			site = vexpress_config_get_master();
-		position = 0;
-		dcc = 0;
-		num = 1;
-	}
+	prop = of_find_property(dev->of_node,
+			"arm,vexpress-sysreg,func", NULL);
+	if (!prop)
+		return ERR_PTR(-EINVAL);
+
+	num = prop->length / sizeof(u32) / 2;
+	val = prop->value;
 
 	/*
 	 * "arm,vexpress-energy" function used to be described
@@ -207,13 +193,8 @@  static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
 	for (i = 0; i < num; i++) {
 		u32 function, device;
 
-		if (dev->of_node) {
-			function = be32_to_cpup(val++);
-			device = be32_to_cpup(val++);
-		} else {
-			function = pdev->resource[0].end;
-			device = pdev->id;
-		}
+		function = be32_to_cpup(val++);
+		device = be32_to_cpup(val++);
 
 		dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n",
 				func, site, position, dcc,
@@ -265,17 +246,6 @@  static struct vexpress_config_bridge_ops vexpress_syscfg_bridge_ops = {
 };
 
 
-/* Non-DT hack, to be gone... */
-static struct device *vexpress_syscfg_bridge;
-
-int vexpress_syscfg_device_register(struct platform_device *pdev)
-{
-	pdev->dev.parent = vexpress_syscfg_bridge;
-
-	return platform_device_register(pdev);
-}
-
-
 static int vexpress_syscfg_probe(struct platform_device *pdev)
 {
 	struct vexpress_syscfg *syscfg;
@@ -303,10 +273,6 @@  static int vexpress_syscfg_probe(struct platform_device *pdev)
 	if (IS_ERR(bridge))
 		return PTR_ERR(bridge);
 
-	/* Non-DT case */
-	if (!pdev->dev.of_node)
-		vexpress_syscfg_bridge = bridge;
-
 	return 0;
 }
 
diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c
index 4dc102e2..7b9b6ea 100644
--- a/drivers/power/reset/vexpress-poweroff.c
+++ b/drivers/power/reset/vexpress-poweroff.c
@@ -88,22 +88,19 @@  static struct of_device_id vexpress_reset_of_match[] = {
 
 static int vexpress_reset_probe(struct platform_device *pdev)
 {
-	enum vexpress_reset_func func;
 	const struct of_device_id *match =
 			of_match_device(vexpress_reset_of_match, &pdev->dev);
 	struct regmap *regmap;
 
-	if (match)
-		func = (enum vexpress_reset_func)match->data;
-	else
-		func = pdev->id_entry->driver_data;
+	if (!match)
+		return -EINVAL;
 
 	regmap = devm_regmap_init_vexpress_config(&pdev->dev);
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 	dev_set_drvdata(&pdev->dev, regmap);
 
-	switch (func) {
+	switch ((enum vexpress_reset_func)match->data) {
 	case FUNC_SHUTDOWN:
 		vexpress_power_off_device = &pdev->dev;
 		pm_power_off = vexpress_power_off;
@@ -124,20 +121,12 @@  static int vexpress_reset_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct platform_device_id vexpress_reset_id_table[] = {
-	{ .name = "vexpress-reset", .driver_data = FUNC_RESET, },
-	{ .name = "vexpress-shutdown", .driver_data = FUNC_SHUTDOWN, },
-	{ .name = "vexpress-reboot", .driver_data = FUNC_REBOOT, },
-	{}
-};
-
 static struct platform_driver vexpress_reset_driver = {
 	.probe = vexpress_reset_probe,
 	.driver = {
 		.name = "vexpress-reset",
 		.of_match_table = vexpress_reset_of_match,
 	},
-	.id_table = vexpress_reset_id_table,
 };
 
 static int __init vexpress_reset_init(void)
diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h
index a4c9547..f8e76e0 100644
--- a/include/linux/vexpress.h
+++ b/include/linux/vexpress.h
@@ -15,8 +15,6 @@ 
 #define _LINUX_VEXPRESS_H
 
 #include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
 #include <linux/regmap.h>
 
 #define VEXPRESS_SITE_MB		0
@@ -24,13 +22,6 @@ 
 #define VEXPRESS_SITE_DB2		2
 #define VEXPRESS_SITE_MASTER		0xf
 
-#define VEXPRESS_RES_FUNC(_site, _func)	\
-{					\
-	.start = (_site),		\
-	.end = (_func),			\
-	.flags = IORESOURCE_BUS,	\
-}
-
 /* Config infrastructure */
 
 void vexpress_config_set_master(u32 site);
@@ -58,16 +49,6 @@  struct regmap *devm_regmap_init_vexpress_config(struct device *dev);
 
 /* Platform control */
 
-unsigned int vexpress_get_mci_cardin(struct device *dev);
-u32 vexpress_get_procid(int site);
-void *vexpress_get_24mhz_clock_base(void);
 void vexpress_flags_set(u32 data);
 
-void vexpress_sysreg_early_init(void __iomem *base);
-int vexpress_syscfg_device_register(struct platform_device *pdev);
-
-/* Clocks */
-
-void vexpress_clk_init(void __iomem *sp810_base);
-
 #endif