| Message ID | 20130116155045.GI25500@titan.lakedaemon.net |
|---|---|
| State | New |
| Headers | show |
On 16.01.2013 16:50, Jason Cooper wrote: > On Wed, Jan 16, 2013 at 09:55:55AM +0100, Soeren Moch wrote: >> On 16.01.2013 04:24, Soeren Moch wrote: >>> On 16.01.2013 03:40, Jason Cooper wrote: >>>> On Wed, Jan 16, 2013 at 01:17:59AM +0100, Soeren Moch wrote: >>>>> On 15.01.2013 22:56, Jason Cooper wrote: >>>>>> On Tue, Jan 15, 2013 at 03:16:17PM -0500, Jason Cooper wrote: > >> OK, I could trigger the error >> ERROR: 1024 KiB atomic DMA coherent pool is too small! >> Please increase it with coherent_pool= kernel parameter! >> only with em28xx sticks and sata, dib0700 sticks removed. > > Did you test the reverse scenario? ie dib0700 with sata_mv and no > em28xx. Maybe I can test this next night. > What kind of throughput are you pushing to the sata disk? Close to nothing. In the last test I had the root filesystem running on the sata disk plus a few 10 megabytes per hour. >>>> What would be most helpful is if you could do a git bisect between >>>> v3.5.x (working) and the oldest version where you know it started >>>> failing (v3.7.1 or earlier if you know it). >>>> >>> I did not bisect it, but Marek mentioned earlier that commit >>> e9da6e9905e639b0f842a244bc770b48ad0523e9 in Linux v3.6-rc1 introduced >>> new code for dma allocations. This is probably the root cause for the >>> new (mis-)behavior (due to my tests 3.6.0 is not working anymore). >> >> I don't want to say that Mareks patch is wrong, probably it triggers a >> bug somewhere else! (in em28xx?) > > Of the four drivers you listed, none are using dma. sata_mv is the only > one. usb_core is doing the actual DMA for the usb bridge drivers, I think. > If one is to believe the comments in sata_mv.c:~151, then the alignment > is wrong for the sg_tbl_pool. > > Could you please try the following patch? OK, what should I test first, the setup from last night (em28xx, no dib0700) plus your patch, or the reverse setup (dib0700, no em28xx) without your patch, or my normal setting (all dvb sticks) plus your patch? Regards, Soeren
On Wed, Jan 16, 2013 at 06:05:59PM +0100, Soeren Moch wrote: > On 16.01.2013 16:50, Jason Cooper wrote: > >On Wed, Jan 16, 2013 at 09:55:55AM +0100, Soeren Moch wrote: > >>On 16.01.2013 04:24, Soeren Moch wrote: > >>>On 16.01.2013 03:40, Jason Cooper wrote: > >>>>On Wed, Jan 16, 2013 at 01:17:59AM +0100, Soeren Moch wrote: > >>>>>On 15.01.2013 22:56, Jason Cooper wrote: > >>>>>>On Tue, Jan 15, 2013 at 03:16:17PM -0500, Jason Cooper wrote: > > > >>OK, I could trigger the error > >> ERROR: 1024 KiB atomic DMA coherent pool is too small! > >> Please increase it with coherent_pool= kernel parameter! > >>only with em28xx sticks and sata, dib0700 sticks removed. > > > >Did you test the reverse scenario? ie dib0700 with sata_mv and no > >em28xx. > > Maybe I can test this next night. Please do, this will tell us if it is in the USB drivers or lower (something in common). > >>>>What would be most helpful is if you could do a git bisect between > >>>>v3.5.x (working) and the oldest version where you know it started > >>>>failing (v3.7.1 or earlier if you know it). > >>>> > >>>I did not bisect it, but Marek mentioned earlier that commit > >>>e9da6e9905e639b0f842a244bc770b48ad0523e9 in Linux v3.6-rc1 introduced > >>>new code for dma allocations. This is probably the root cause for the > >>>new (mis-)behavior (due to my tests 3.6.0 is not working anymore). > >> > >>I don't want to say that Mareks patch is wrong, probably it triggers a > >>bug somewhere else! (in em28xx?) > > > >Of the four drivers you listed, none are using dma. sata_mv is the only > >one. > > usb_core is doing the actual DMA for the usb bridge drivers, I think. Yes, my mistake. I'd like to attribute that statement to pre-coffee rambling. :-) > >If one is to believe the comments in sata_mv.c:~151, then the alignment > >is wrong for the sg_tbl_pool. > > > >Could you please try the following patch? > > OK, what should I test first, the setup from last night (em28xx, no > dib0700) plus your patch, or the reverse setup (dib0700, no em28xx) > without your patch, or my normal setting (all dvb sticks) plus your > patch? if testing time is limited, please do the test I outlined at the top of this email. I've been digging more into the dma code and while I think the patch is correct, I don't see where it would fix your problem (yet). thx, Jason.
> > >On Wed, Jan 16, 2013 at 09:55:55AM +0100, Soeren Moch wrote: > > >>I don't want to say that Mareks patch is wrong, probably it triggers a > > >>bug somewhere else! (in em28xx?) Could you send the output of: lsusb -v -d VEND:PROD for the em28xx? thx, Jason.
On 16.01.2013 19:35, Jason Cooper wrote: >>>> On Wed, Jan 16, 2013 at 09:55:55AM +0100, Soeren Moch wrote: >>>>> I don't want to say that Mareks patch is wrong, probably it triggers a >>>>> bug somewhere else! (in em28xx?) > > Could you send the output of: > > lsusb -v -d VEND:PROD > > for the em28xx? > > thx, > > Jason. > Here is the lsusb output for both of my em28xx sticks. Regards, Soeren Bus 001 Device 005: ID 0ccd:00b2 TerraTec Electronic GmbH Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0ccd TerraTec Electronic GmbH idProduct 0x00b2 bcdDevice 1.00 iManufacturer 3 TERRATEC iProduct 1 Cinergy HTC Stick iSerial 2 123456789ABCD bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 305 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 2 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0ad0 2x 720 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 3 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0c00 2x 1024 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 4 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x1300 3x 768 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 5 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x1380 3x 896 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 6 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x13c0 3x 960 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 7 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x1400 3x 1024 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 001 Device 009: ID 2304:0242 Pinnacle Systems, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2304 Pinnacle Systems, Inc. idProduct 0x0242 bcdDevice 1.00 iManufacturer 1 Pinnacle Systems iProduct 2 PCTV 510e iSerial 3 123456789012 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 305 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 2 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0ad0 2x 720 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 3 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0c00 2x 1024 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 4 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x1300 3x 768 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 5 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x1380 3x 896 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 6 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x13c0 3x 960 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 7 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x1400 3x 1024 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered)
On 16.01.2013 18:52, Jason Cooper wrote: > On Wed, Jan 16, 2013 at 06:05:59PM +0100, Soeren Moch wrote: >> On 16.01.2013 16:50, Jason Cooper wrote: >>> On Wed, Jan 16, 2013 at 09:55:55AM +0100, Soeren Moch wrote: >>>> On 16.01.2013 04:24, Soeren Moch wrote: >>>>> On 16.01.2013 03:40, Jason Cooper wrote: >>>>>> On Wed, Jan 16, 2013 at 01:17:59AM +0100, Soeren Moch wrote: >>>>>>> On 15.01.2013 22:56, Jason Cooper wrote: >>>>>>>> On Tue, Jan 15, 2013 at 03:16:17PM -0500, Jason Cooper wrote: >>> >>>> OK, I could trigger the error >>>> ERROR: 1024 KiB atomic DMA coherent pool is too small! >>>> Please increase it with coherent_pool= kernel parameter! >>>> only with em28xx sticks and sata, dib0700 sticks removed. >>> >>> Did you test the reverse scenario? ie dib0700 with sata_mv and no >>> em28xx. >> >> Maybe I can test this next night. > > Please do, this will tell us if it is in the USB drivers or lower > (something in common). > >>>>>> What would be most helpful is if you could do a git bisect between >>>>>> v3.5.x (working) and the oldest version where you know it started >>>>>> failing (v3.7.1 or earlier if you know it). >>>>>> >>>>> I did not bisect it, but Marek mentioned earlier that commit >>>>> e9da6e9905e639b0f842a244bc770b48ad0523e9 in Linux v3.6-rc1 introduced >>>>> new code for dma allocations. This is probably the root cause for the >>>>> new (mis-)behavior (due to my tests 3.6.0 is not working anymore). >>>> >>>> I don't want to say that Mareks patch is wrong, probably it triggers a >>>> bug somewhere else! (in em28xx?) >>> >>> Of the four drivers you listed, none are using dma. sata_mv is the only >>> one. >> >> usb_core is doing the actual DMA for the usb bridge drivers, I think. > > Yes, my mistake. I'd like to attribute that statement to pre-coffee > rambling. :-) > >>> If one is to believe the comments in sata_mv.c:~151, then the alignment >>> is wrong for the sg_tbl_pool. >>> >>> Could you please try the following patch? >> >> OK, what should I test first, the setup from last night (em28xx, no >> dib0700) plus your patch, or the reverse setup (dib0700, no em28xx) >> without your patch, or my normal setting (all dvb sticks) plus your >> patch? > > if testing time is limited, please do the test I outlined at the top of > this email. I've been digging more into the dma code and while I think > the patch is correct, I don't see where it would fix your problem (yet). Unfortunately test time is limited, and the test has to run about 10 hours to trigger the error. I also think that sata is not causing the problem. Maybe your patch even goes in the wrong direction. Perhaps the dma memory pool is not too small, there might be enough memory available, but it is too much fragmented to satisfy larger block allocations. With different drivers allocating totally different block sizes aligned to bytes or words, perhaps we end up with lots of very small free blocks in the dma pool after several hours of runtime? So maybe it would help to align all allocations in the dma pool to 256B? Regards, Soeren
On 16.01.2013 18:52, Jason Cooper wrote: > On Wed, Jan 16, 2013 at 06:05:59PM +0100, Soeren Moch wrote: >> On 16.01.2013 16:50, Jason Cooper wrote: >>> On Wed, Jan 16, 2013 at 09:55:55AM +0100, Soeren Moch wrote: >>>> On 16.01.2013 04:24, Soeren Moch wrote: >>>>> On 16.01.2013 03:40, Jason Cooper wrote: >>>>>> On Wed, Jan 16, 2013 at 01:17:59AM +0100, Soeren Moch wrote: >>>>>>> On 15.01.2013 22:56, Jason Cooper wrote: >>>>>>>> On Tue, Jan 15, 2013 at 03:16:17PM -0500, Jason Cooper wrote: >>> >>>> OK, I could trigger the error >>>> ERROR: 1024 KiB atomic DMA coherent pool is too small! >>>> Please increase it with coherent_pool= kernel parameter! >>>> only with em28xx sticks and sata, dib0700 sticks removed. >>> >>> Did you test the reverse scenario? ie dib0700 with sata_mv and no >>> em28xx. >> >> Maybe I can test this next night. > > Please do, this will tell us if it is in the USB drivers or lower > (something in common). Until now there is no error with dib0700 + sata, without em28xx. But to be sure that there is absolutely no problem with this setting we probably need additional testing hours. BTW, these dib0700 sticks use usb bulk transfers (and maybe smaller dma buffers?). Regards, Soeren
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 68f4fb5..e2e5a8a 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -148,6 +148,9 @@ enum { * CRPB needs alignment on a 256B boundary. Size == 256B * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B */ + MV_CRQB_Q_ALIGN = 1024, + MV_CRPB_Q_ALIGN = 256, + MV_SG_TBL_ALIGN = 16, MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH), MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH), MV_MAX_SG_CT = 256, @@ -3975,17 +3978,17 @@ done: static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev) { hpriv->crqb_pool = dmam_pool_create("crqb_q", dev, MV_CRQB_Q_SZ, - MV_CRQB_Q_SZ, 0); + MV_CRQB_Q_ALIGN, 0); if (!hpriv->crqb_pool) return -ENOMEM; hpriv->crpb_pool = dmam_pool_create("crpb_q", dev, MV_CRPB_Q_SZ, - MV_CRPB_Q_SZ, 0); + MV_CRPB_Q_ALIGN, 0); if (!hpriv->crpb_pool) return -ENOMEM; hpriv->sg_tbl_pool = dmam_pool_create("sg_tbl", dev, MV_SG_TBL_SZ, - MV_SG_TBL_SZ, 0); + MV_SG_TBL_ALIGN, 0); if (!hpriv->sg_tbl_pool) return -ENOMEM;