| Message ID | 1415195854-5753-1-git-send-email-rogerq@ti.com |
|---|---|
| State | New |
| Headers | show |
On Wed, Nov 05, 2014 at 03:57:34PM +0200, Roger Quadros wrote: > Push the device tree blob load address (fdtaddr) further apart than > kernel load address (loadaddr) to accomodate a larger kernel image. > We set fdtaddr to the same value as set in ti_armv7_common.h. > > With this change, I'm able to boot linux-3.18-rc1 zImage built using > omap2plus_defconfig. > > Signed-off-by: Roger Quadros <rogerq@ti.com> > --- > include/configs/omap3_beagle.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h > index f25a940..5ea048a 100644 > --- a/include/configs/omap3_beagle.h > +++ b/include/configs/omap3_beagle.h > @@ -132,7 +132,7 @@ > "loadaddr=0x80200000\0" \ > "rdaddr=0x81000000\0" \ > "fdt_high=0xffffffff\0" \ > - "fdtaddr=0x80f80000\0" \ > + "fdtaddr=0x88000000\0" \ While we're in here whacking these values lets make this match up the rest of the values we use in ti_armv7_common.h (so drop fdt_high and set bootm_size and so forth). Thanks!
On 11/05/2014 04:18 PM, Tom Rini wrote: > On Wed, Nov 05, 2014 at 03:57:34PM +0200, Roger Quadros wrote: > >> Push the device tree blob load address (fdtaddr) further apart than >> kernel load address (loadaddr) to accomodate a larger kernel image. >> We set fdtaddr to the same value as set in ti_armv7_common.h. >> >> With this change, I'm able to boot linux-3.18-rc1 zImage built using >> omap2plus_defconfig. >> >> Signed-off-by: Roger Quadros <rogerq@ti.com> >> --- >> include/configs/omap3_beagle.h | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h >> index f25a940..5ea048a 100644 >> --- a/include/configs/omap3_beagle.h >> +++ b/include/configs/omap3_beagle.h >> @@ -132,7 +132,7 @@ >> "loadaddr=0x80200000\0" \ >> "rdaddr=0x81000000\0" \ >> "fdt_high=0xffffffff\0" \ >> - "fdtaddr=0x80f80000\0" \ >> + "fdtaddr=0x88000000\0" \ > > While we're in here whacking these values lets make this match up the > rest of the values we use in ti_armv7_common.h (so drop fdt_high and set > bootm_size and so forth). Thanks! > It seems like omap3_beagle.h includes ti_omap3_common.h which in turn includes ti_armv7_common.h. So I just need to remove the duplicate definitions from omap3_beagle.h cheers, -roger
On Wed, Nov 05, 2014 at 04:25:55PM +0200, Roger Quadros wrote: > On 11/05/2014 04:18 PM, Tom Rini wrote: > > On Wed, Nov 05, 2014 at 03:57:34PM +0200, Roger Quadros wrote: > > > >> Push the device tree blob load address (fdtaddr) further apart than > >> kernel load address (loadaddr) to accomodate a larger kernel image. > >> We set fdtaddr to the same value as set in ti_armv7_common.h. > >> > >> With this change, I'm able to boot linux-3.18-rc1 zImage built using > >> omap2plus_defconfig. > >> > >> Signed-off-by: Roger Quadros <rogerq@ti.com> > >> --- > >> include/configs/omap3_beagle.h | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h > >> index f25a940..5ea048a 100644 > >> --- a/include/configs/omap3_beagle.h > >> +++ b/include/configs/omap3_beagle.h > >> @@ -132,7 +132,7 @@ > >> "loadaddr=0x80200000\0" \ > >> "rdaddr=0x81000000\0" \ > >> "fdt_high=0xffffffff\0" \ > >> - "fdtaddr=0x80f80000\0" \ > >> + "fdtaddr=0x88000000\0" \ > > > > While we're in here whacking these values lets make this match up the > > rest of the values we use in ti_armv7_common.h (so drop fdt_high and set > > bootm_size and so forth). Thanks! > > > It seems like omap3_beagle.h includes ti_omap3_common.h which in turn includes > ti_armv7_common.h. > > So I just need to remove the duplicate definitions from omap3_beagle.h And references DEFAULT_LINUX_BOOT_ENV :)
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index f25a940..5ea048a 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -132,7 +132,7 @@ "loadaddr=0x80200000\0" \ "rdaddr=0x81000000\0" \ "fdt_high=0xffffffff\0" \ - "fdtaddr=0x80f80000\0" \ + "fdtaddr=0x88000000\0" \ "usbtty=cdc_acm\0" \ "bootfile=uImage\0" \ "ramdisk=ramdisk.gz\0" \
Push the device tree blob load address (fdtaddr) further apart than kernel load address (loadaddr) to accomodate a larger kernel image. We set fdtaddr to the same value as set in ti_armv7_common.h. With this change, I'm able to boot linux-3.18-rc1 zImage built using omap2plus_defconfig. Signed-off-by: Roger Quadros <rogerq@ti.com> --- include/configs/omap3_beagle.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)