@@ -377,7 +377,7 @@ config USB_FUSBH200_HCD
module will be called fusbh200-hcd.
config USB_OHCI_HCD
- tristate "OHCI HCD support"
+ tristate "OHCI HCD (USB 1.1) support"
depends on USB_ARCH_HAS_OHCI
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
depends on USB_ISP1301 || !ARCH_LPC32XX
@@ -446,8 +446,8 @@ config USB_OHCI_HCD_PPC_OF
default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
config USB_OHCI_HCD_PCI
- bool "OHCI support for PCI-bus USB controllers"
- depends on PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF)
+ tristate "OHCI support for PCI-bus USB controllers"
+ depends on PCI
default y
select USB_OHCI_LITTLE_ENDIAN
---help---
@@ -42,7 +42,10 @@ obj-$(CONFIG_USB_EHCI_TEGRA) +=ehci-tegra.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
+
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
+obj-$(CONFIG_USB_OHCI_HCD_PCI) += ohci-pci.o
+
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o
@@ -1168,11 +1168,6 @@ MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE ("GPL");
-#ifdef CONFIG_PCI
-#include "ohci-pci.c"
-#define PCI_DRIVER ohci_pci_driver
-#endif
-
#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_SA1111)
#include "ohci-sa1111.c"
#define SA1111_DRIVER ohci_hcd_sa1111_driver
@@ -1268,7 +1263,7 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_platform_driver
#endif
-#if !defined(PCI_DRIVER) && \
+#if !IS_ENABLED(CONFIG_USB_OHCI_HCD_PCI) && \
!defined(PLATFORM_DRIVER) && \
!defined(OMAP1_PLATFORM_DRIVER) && \
!defined(OMAP3_PLATFORM_DRIVER) && \
@@ -1343,12 +1338,6 @@ static int __init ohci_hcd_mod_init(void)
goto error_sa1111;
#endif
-#ifdef PCI_DRIVER
- retval = pci_register_driver(&PCI_DRIVER);
- if (retval < 0)
- goto error_pci;
-#endif
-
#ifdef SM501_OHCI_DRIVER
retval = platform_driver_register(&SM501_OHCI_DRIVER);
if (retval < 0)
@@ -1442,10 +1431,6 @@ static int __init ohci_hcd_mod_init(void)
platform_driver_unregister(&SM501_OHCI_DRIVER);
error_sm501:
#endif
-#ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
- error_pci:
-#endif
#ifdef SA1111_DRIVER
sa1111_driver_unregister(&SA1111_DRIVER);
error_sa1111:
@@ -1510,9 +1495,6 @@ static void __exit ohci_hcd_mod_exit(void)
#ifdef SM501_OHCI_DRIVER
platform_driver_unregister(&SM501_OHCI_DRIVER);
#endif
-#ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
-#endif
#ifdef SA1111_DRIVER
sa1111_driver_unregister(&SA1111_DRIVER);
#endif
@@ -14,12 +14,19 @@
* This file is licenced under the GPL.
*/
-#ifndef CONFIG_PCI
-#error "This file is PCI bus glue. CONFIG_PCI must be defined."
-#endif
-
-#include <linux/pci.h>
#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+#include "pci-quirks.h"
+
+#define DRIVER_DESC "OHCI PCI platform driver"
+
+static const char hcd_name[] = "ohci-pci";
/*-------------------------------------------------------------------------*/
@@ -229,10 +236,10 @@ static const struct pci_device_id ohci_pci_quirks[] = {
static int ohci_pci_reset (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int ret = 0;
if (hcd->self.controller) {
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
const struct pci_device_id *quirk_id;
quirk_id = pci_match_id(ohci_pci_quirks, pdev);
@@ -242,94 +249,25 @@ static int ohci_pci_reset (struct usb_hcd *hcd)
ret = quirk(hcd);
}
}
- if (ret == 0) {
- ohci_hcd_init (ohci);
- return ohci_init (ohci);
- }
- return ret;
-}
-
-
-static int ohci_pci_start (struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
-
-#ifdef CONFIG_PM /* avoid warnings about unused pdev */
- if (hcd->self.controller) {
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-
- /* RWC may not be set for add-in PCI cards, since boot
- * firmware probably ignored them. This transfers PCI
- * PM wakeup capabilities.
- */
- if (device_can_wakeup(&pdev->dev))
- ohci->hc_control |= OHCI_CTRL_RWC;
- }
-#endif /* CONFIG_PM */
- ret = ohci_run (ohci);
- if (ret < 0) {
- ohci_err (ohci, "can't start\n");
- ohci_stop (hcd);
- }
+ if (ret == 0)
+ ret = ohci_setup(hcd);
+ /*
+ * After ohci setup RWC may not be set for add-in PCI cards.
+ * This transfers PCI PM wakeup capabilities.
+ */
+ if (device_can_wakeup(&pdev->dev))
+ ohci->hc_control |= OHCI_CTRL_RWC;
return ret;
}
+static struct hc_driver __read_mostly ohci_pci_hc_driver;
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_pci_hc_driver = {
- .description = hcd_name,
- .product_desc = "OHCI Host Controller",
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_MEMORY | HCD_USB11,
-
- /*
- * basic lifecycle operations
- */
+static const struct ohci_driver_overrides pci_overrides __initconst = {
+ .product_desc = "OHCI PCI host controller",
.reset = ohci_pci_reset,
- .start = ohci_pci_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
-#ifdef CONFIG_PM
- .pci_suspend = ohci_suspend,
- .pci_resume = ohci_resume,
-#endif
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
};
-/*-------------------------------------------------------------------------*/
-
-
static const struct pci_device_id pci_ids [] = { {
/* handle any USB OHCI controller */
PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
@@ -357,3 +295,24 @@ static struct pci_driver ohci_pci_driver = {
},
#endif
};
+
+static int __init ohci_pci_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ohci_init_driver(&ohci_pci_hc_driver, &pci_overrides);
+ return pci_register_driver(&ohci_pci_driver);
+}
+module_init(ohci_pci_init);
+
+static void __exit ohci_pci_cleanup(void)
+{
+ pci_unregister_driver(&ohci_pci_driver);
+}
+module_exit(ohci_pci_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
This patch splits the PCI portion of ohci-hcd out into its own separate driver module, called ohci-pci. The major point of difficulty lies in ohci-pci's many vendor- and device-specific workarounds. Some of them have to be applied before calling ohci_start() some after, which necessitates a fair amount of code motion. The other platform drivers require much smaller changes. The complete sb800_prefetch() function moved to ohci-q.c,because its only related to ohci-pci driver. USB_OHCI_HCD_PCI symbol no longer dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF that's what removed. V2: - few specific content of pci related code in ohci_pci_start function has been moved to ohci_pci_reset and rest of the generic code is written in ohci_start of ohci-hcd.c file. V3: - ohci_restart() has been called in ohci_pci_reset() function for to reset the ohci pci. V4: -sb800_prefetch() moved to ohci-q.c,because its only related to ohci-pci. -no longer _creating_ CONFIG_USB_OHCI_PCI,creating CONFIG_USB_OHCI_HCD_PCI. -overrides renamed with pci_override,its giving proper meaning. V5: -sb800_prefetch() moved to pci-quirks.c,because its only related to pci. V6: -sb800_prefetch() function has been moved to pci-quirks.c made as separate patch in 2/3. -Most of the generic ohci pci changes moved in 2/3 patch,now this is complete ohci-pci separation patch. V7: -Unrelated include file has been removed from ohci.h file. V8: -USB_OHCI_HCD_PCI symbol does not dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg KH <greg@kroah.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org --- drivers/usb/host/Kconfig | 6 +- drivers/usb/host/Makefile | 3 + drivers/usb/host/ohci-hcd.c | 20 +------ drivers/usb/host/ohci-pci.c | 131 +++++++++++++++---------------------------- 4 files changed, 52 insertions(+), 108 deletions(-)