[edk2,19/26] BeagleBoardPkg: remove unused Sec.inf module

This module is not referenced anywhere, so remove it.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

---
 BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S   |  85 ------
 BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm |  89 ------
 BeagleBoardPkg/Sec/Cache.c                  |  79 ------
 BeagleBoardPkg/Sec/Clock.c                  |  70 -----
 BeagleBoardPkg/Sec/LzmaDecompress.h         | 103 -------
 BeagleBoardPkg/Sec/PadConfiguration.c       | 282 --------------------
 BeagleBoardPkg/Sec/Sec.c                    | 186 -------------
 BeagleBoardPkg/Sec/Sec.inf                  |  73 -----
 8 files changed, 967 deletions(-)

-- 
2.7.4

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

CC:ing Andrew, who wrote it.

On Wed, Aug 10, 2016 at 05:17:55PM +0200, Ard Biesheuvel wrote:
> This module is not referenced anywhere, so remove it.

> 

> Contributed-under: TianoCore Contribution Agreement 1.0

> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

> ---

>  BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S   |  85 ------

>  BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm |  89 ------

>  BeagleBoardPkg/Sec/Cache.c                  |  79 ------

>  BeagleBoardPkg/Sec/Clock.c                  |  70 -----

>  BeagleBoardPkg/Sec/LzmaDecompress.h         | 103 -------

>  BeagleBoardPkg/Sec/PadConfiguration.c       | 282 --------------------

>  BeagleBoardPkg/Sec/Sec.c                    | 186 -------------

>  BeagleBoardPkg/Sec/Sec.inf                  |  73 -----

>  8 files changed, 967 deletions(-)

> 

> diff --git a/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S b/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S

> deleted file mode 100644

> index b656c1e040c5..000000000000

> --- a/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S

> +++ /dev/null

> @@ -1,85 +0,0 @@

> -#------------------------------------------------------------------------------

> -#

> -# Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

> -#

> -# This program and the accompanying materials

> -# are licensed and made available under the terms and conditions of the BSD License

> -# which accompanies this distribution.  The full text of the license may be found at

> -# http://opensource.org/licenses/bsd-license.php

> -#

> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

> -#

> -#------------------------------------------------------------------------------

> -

> -#include <AsmMacroIoLib.h>

> -#include <Library/PcdLib.h>

> -

> -.text

> -.align 3

> -

> -.globl ASM_PFX(CEntryPoint)

> -GCC_ASM_EXPORT(_ModuleEntryPoint)

> -

> -ASM_PFX(_ModuleEntryPoint):

> -

> -  //Disable L2 cache

> -  mrc     p15, 0, r0, c1, c0, 1   // read Auxiliary Control Register

> -  bic     r0, r0, #0x00000002     // disable L2 cache

> -  mcr     p15, 0, r0, c1, c0, 1   // store Auxiliary Control Register

> -

> -  //Enable Strict alignment checking & Instruction cache

> -  mrc     p15, 0, r0, c1, c0, 0

> -  bic     r0, r0, #0x00002300     /* clear bits 13, 9:8 (--V- --RS) */

> -  bic     r0, r0, #0x00000005     /* clear bits 0, 2 (---- -C-M) */

> -  orr     r0, r0, #0x00000002     /* set bit 1 (A) Align */

> -  orr     r0, r0, #0x00001000     /* set bit 12 (I) enable I-Cache */

> -  mcr     p15, 0, r0, c1, c0, 0

> -

> -  // Enable NEON register in case folks want to use them for optimizations (CopyMem)

> -  mrc     p15, 0, r0, c1, c0, 2

> -  orr     r0, r0, #0x00f00000   // Enable VPF access (V* instructions)

> -  mcr     p15, 0, r0, c1, c0, 2

> -  mov     r0, #0x40000000       // Set EN bit in FPEXC

> -  mcr     p10,#0x7,r0,c8,c0,#0  // msr     FPEXC,r0 in ARM assembly

> -

> -

> -  // Set CPU vectors to start of DRAM

> -  LoadConstantToReg (FixedPcdGet32(PcdCpuVectorBaseAddress) ,r0) // Get vector base

> -  mcr     p15, 0, r0, c12, c0, 0

> -  isb                               // Sync changes to control registers

> -

> -  // Fill vector table with branchs to current pc (jmp $)

> -  ldr     r1, ShouldNeverGetHere

> -  movs    r2, #0

> -FillVectors:

> -  str     r1, [r0, r2]

> -  adds    r2, r2, #4

> -  cmp     r2, #32

> -  bne     FillVectors

> -

> -  /* before we call C code, lets setup the stack pointer in internal RAM */

> -stack_pointer_setup:

> -

> -  //

> -  // Set stack based on PCD values. Need to do it this way to make C code work

> -  // when it runs from FLASH.

> -  //

> -  LoadConstantToReg (FixedPcdGet32(PcdPrePiStackBase) ,r2)    /* stack base arg2  */

> -  LoadConstantToReg (FixedPcdGet32(PcdPrePiStackSize) ,r3)    /* stack size arg3  */

> -  add     r4, r2, r3

> -

> -  //Enter SVC mode and set up SVC stack pointer

> -  mov     r0,#0x13|0x80|0x40

> -  msr     CPSR_c,r0

> -  mov     r13,r4

> -

> -  // Call C entry point

> -  LoadConstantToReg (FixedPcdGet32(PcdMemorySize) ,r1)    /* memory size arg1          */

> -  LoadConstantToReg (FixedPcdGet32(PcdMemoryBase) ,r0)    /* memory size arg0         */

> -  blx      ASM_PFX(CEntryPoint) /* Assume C code is thumb    */

> -

> -ShouldNeverGetHere:

> -  /* _CEntryPoint should never return */

> -  b       ShouldNeverGetHere

> -

> diff --git a/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm b/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm

> deleted file mode 100644

> index 63174d4b8437..000000000000

> --- a/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm

> +++ /dev/null

> @@ -1,89 +0,0 @@

> -//------------------------------------------------------------------------------

> -//

> -// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

> -//

> -// This program and the accompanying materials

> -// are licensed and made available under the terms and conditions of the BSD License

> -// which accompanies this distribution.  The full text of the license may be found at

> -// http://opensource.org/licenses/bsd-license.php

> -//

> -// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

> -// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

> -//

> -//------------------------------------------------------------------------------

> -

> -#include <AsmMacroIoLib.h>

> -#include <Library/PcdLib.h>

> -#include <AutoGen.h>

> -  INCLUDE AsmMacroIoLib.inc

> -

> -  IMPORT  CEntryPoint

> -  EXPORT  _ModuleEntryPoint

> -

> -  PRESERVE8

> -  AREA    ModuleEntryPoint, CODE, READONLY

> -

> -

> -_ModuleEntryPoint

> -

> -  //Disable L2 cache

> -  mrc     p15, 0, r0, c1, c0, 1   // read Auxiliary Control Register

> -  bic     r0, r0, #0x00000002     // disable L2 cache

> -  mcr     p15, 0, r0, c1, c0, 1   // store Auxiliary Control Register

> -

> -  //Enable Strict alignment checking & Instruction cache

> -  mrc     p15, 0, r0, c1, c0, 0

> -  bic     r0, r0, #0x00002300     /* clear bits 13, 9:8 (--V- --RS) */

> -  bic     r0, r0, #0x00000005     /* clear bits 0, 2 (---- -C-M) */

> -  orr     r0, r0, #0x00000002     /* set bit 1 (A) Align */

> -  orr     r0, r0, #0x00001000     /* set bit 12 (I) enable I-Cache */

> -  mcr     p15, 0, r0, c1, c0, 0

> -

> -  // Enable NEON register in case folks want to use them for optimizations (CopyMem)

> -  mrc     p15, 0, r0, c1, c0, 2

> -  orr     r0, r0, #0x00f00000   // Enable VPF access (V* instructions)

> -  mcr     p15, 0, r0, c1, c0, 2

> -  mov     r0, #0x40000000       // Set EN bit in FPEXC

> -  msr     FPEXC,r0

> -

> -  // Set CPU vectors to start of DRAM

> -  LoadConstantToReg (FixedPcdGet32(PcdCpuVectorBaseAddress) ,r0) // Get vector base

> -  mcr     p15, 0, r0, c12, c0, 0

> -  isb                               // Sync changes to control registers

> -

> -  // Fill vector table with branchs to current pc (jmp $)

> -  ldr     r1, ShouldNeverGetHere

> -  movs    r2, #0

> -FillVectors

> -  str     r1, [r0, r2]

> -  adds    r2, r2, #4

> -  cmp     r2, #32

> -  bne     FillVectors

> -

> -  /* before we call C code, lets setup the stack pointer in internal RAM */

> -stack_pointer_setup

> -

> -  //

> -  // Set stack based on PCD values. Need to do it this way to make C code work

> -  // when it runs from FLASH.

> -  //

> -  LoadConstantToReg (FixedPcdGet32(PcdPrePiStackBase) ,r2)    // stack base arg2

> -  LoadConstantToReg (FixedPcdGet32(PcdPrePiStackSize) ,r3)    // stack size arg3

> -  add     r4, r2, r3

> -

> -  //Enter SVC mode and set up SVC stack pointer

> -  mov     r5,#0x13|0x80|0x40

> -  msr     CPSR_c,r5

> -  mov     r13,r4

> -

> -  // Call C entry point

> -  LoadConstantToReg (FixedPcdGet32(PcdMemorySize) ,r1)    // memory size arg1

> -  LoadConstantToReg (FixedPcdGet32(PcdMemoryBase) ,r0)    // memory start arg0

> -  blx     CEntryPoint                                     // Assume C code is thumb

> -

> -ShouldNeverGetHere

> -  /* _CEntryPoint should never return */

> -  b       ShouldNeverGetHere

> -

> -  END

> -

> diff --git a/BeagleBoardPkg/Sec/Cache.c b/BeagleBoardPkg/Sec/Cache.c

> deleted file mode 100644

> index 7399eef5be7c..000000000000

> --- a/BeagleBoardPkg/Sec/Cache.c

> +++ /dev/null

> @@ -1,79 +0,0 @@

> -/** @file

> -

> -  Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

> -

> -  This program and the accompanying materials

> -  are licensed and made available under the terms and conditions of the BSD License

> -  which accompanies this distribution.  The full text of the license may be found at

> -  http://opensource.org/licenses/bsd-license.php

> -

> -  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

> -  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

> -

> -**/

> -

> -#include <PiPei.h>

> -

> -#include <Library/ArmLib.h>

> -#include <Library/PrePiLib.h>

> -#include <Library/PcdLib.h>

> -

> -// DDR attributes

> -#define DDR_ATTRIBUTES_CACHED                ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK

> -#define DDR_ATTRIBUTES_UNCACHED              ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED

> -

> -// SoC registers. L3 interconnects

> -#define SOC_REGISTERS_L3_PHYSICAL_BASE       0x68000000

> -#define SOC_REGISTERS_L3_PHYSICAL_LENGTH     0x08000000

> -#define SOC_REGISTERS_L3_ATTRIBUTES          ARM_MEMORY_REGION_ATTRIBUTE_DEVICE

> -

> -// SoC registers. L4 interconnects

> -#define SOC_REGISTERS_L4_PHYSICAL_BASE       0x48000000

> -#define SOC_REGISTERS_L4_PHYSICAL_LENGTH     0x08000000

> -#define SOC_REGISTERS_L4_ATTRIBUTES          ARM_MEMORY_REGION_ATTRIBUTE_DEVICE

> -

> -VOID

> -InitCache (

> -  IN  UINT32  MemoryBase,

> -  IN  UINT32  MemoryLength

> -  )

> -{

> -  UINT32                        CacheAttributes;

> -  ARM_MEMORY_REGION_DESCRIPTOR  MemoryTable[5];

> -  VOID                          *TranslationTableBase;

> -  UINTN                         TranslationTableSize;

> -

> -  if (FeaturePcdGet(PcdCacheEnable) == TRUE) {

> -    CacheAttributes = DDR_ATTRIBUTES_CACHED;

> -  } else {

> -    CacheAttributes = DDR_ATTRIBUTES_UNCACHED;

> -  }

> -

> -  // DDR

> -  MemoryTable[0].PhysicalBase = MemoryBase;

> -  MemoryTable[0].VirtualBase  = MemoryBase;

> -  MemoryTable[0].Length       = MemoryLength;

> -  MemoryTable[0].Attributes   = (ARM_MEMORY_REGION_ATTRIBUTES)CacheAttributes;

> -

> -  // SOC Registers. L3 interconnects

> -  MemoryTable[1].PhysicalBase = SOC_REGISTERS_L3_PHYSICAL_BASE;

> -  MemoryTable[1].VirtualBase  = SOC_REGISTERS_L3_PHYSICAL_BASE;

> -  MemoryTable[1].Length       = SOC_REGISTERS_L3_PHYSICAL_LENGTH;

> -  MemoryTable[1].Attributes   = SOC_REGISTERS_L3_ATTRIBUTES;

> -

> -  // SOC Registers. L4 interconnects

> -  MemoryTable[2].PhysicalBase = SOC_REGISTERS_L4_PHYSICAL_BASE;

> -  MemoryTable[2].VirtualBase  = SOC_REGISTERS_L4_PHYSICAL_BASE;

> -  MemoryTable[2].Length       = SOC_REGISTERS_L4_PHYSICAL_LENGTH;

> -  MemoryTable[2].Attributes   = SOC_REGISTERS_L4_ATTRIBUTES;

> -

> -  // End of Table

> -  MemoryTable[3].PhysicalBase = 0;

> -  MemoryTable[3].VirtualBase  = 0;

> -  MemoryTable[3].Length       = 0;

> -  MemoryTable[3].Attributes   = (ARM_MEMORY_REGION_ATTRIBUTES)0;

> -

> -  ArmConfigureMmu (MemoryTable, &TranslationTableBase, &TranslationTableSize);

> -

> -  BuildMemoryAllocationHob((EFI_PHYSICAL_ADDRESS)(UINTN)TranslationTableBase, TranslationTableSize, EfiBootServicesData);

> -}

> diff --git a/BeagleBoardPkg/Sec/Clock.c b/BeagleBoardPkg/Sec/Clock.c

> deleted file mode 100644

> index 24fdc71c420f..000000000000

> --- a/BeagleBoardPkg/Sec/Clock.c

> +++ /dev/null

> @@ -1,70 +0,0 @@

> -/** @file

> -

> -  Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

> -

> -  This program and the accompanying materials

> -  are licensed and made available under the terms and conditions of the BSD License

> -  which accompanies this distribution.  The full text of the license may be found at

> -  http://opensource.org/licenses/bsd-license.php

> -

> -  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

> -  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

> -

> -**/

> -

> -#include <Library/IoLib.h>

> -#include <Library/DebugLib.h>

> -

> -#include <Omap3530/Omap3530.h>

> -

> -VOID

> -ClockInit (

> -  VOID

> -  )

> -{

> -  //DPLL1 - DPLL4 are configured part of Configuration header which OMAP3 ROM parses.

> -

> -  // Enable PLL5 and set to 120 MHz as a reference clock.

> -  MmioWrite32 (CM_CLKSEL4_PLL, CM_CLKSEL_PLL_MULT(120) | CM_CLKSEL_PLL_DIV(13));

> -  MmioWrite32 (CM_CLKSEL5_PLL, CM_CLKSEL_DIV_120M(1));

> -  MmioWrite32 (CM_CLKEN2_PLL, CM_CLKEN_FREQSEL_075_100 | CM_CLKEN_ENABLE);

> -

> -  // Turn on functional & interface clocks to the USBHOST power domain

> -  MmioOr32(CM_FCLKEN_USBHOST, CM_FCLKEN_USBHOST_EN_USBHOST2_ENABLE

> -                              | CM_FCLKEN_USBHOST_EN_USBHOST1_ENABLE);

> -  MmioOr32(CM_ICLKEN_USBHOST, CM_ICLKEN_USBHOST_EN_USBHOST_ENABLE);

> -

> -  // Turn on functional & interface clocks to the USBTLL block.

> -  MmioOr32(CM_FCLKEN3_CORE, CM_FCLKEN3_CORE_EN_USBTLL_ENABLE);

> -  MmioOr32(CM_ICLKEN3_CORE, CM_ICLKEN3_CORE_EN_USBTLL_ENABLE);

> -

> -  // Turn on functional & interface clocks to MMC1 and I2C1 modules.

> -  MmioOr32(CM_FCLKEN1_CORE, CM_FCLKEN1_CORE_EN_MMC1_ENABLE

> -                            | CM_FCLKEN1_CORE_EN_I2C1_ENABLE);

> -  MmioOr32(CM_ICLKEN1_CORE, CM_ICLKEN1_CORE_EN_MMC1_ENABLE

> -                            | CM_ICLKEN1_CORE_EN_I2C1_ENABLE);

> -

> -  // Turn on functional & interface clocks to various Peripherals.

> -  MmioOr32(CM_FCLKEN_PER, CM_FCLKEN_PER_EN_UART3_ENABLE

> -                          | CM_FCLKEN_PER_EN_GPT3_ENABLE

> -                          | CM_FCLKEN_PER_EN_GPT4_ENABLE

> -                          | CM_FCLKEN_PER_EN_GPIO2_ENABLE

> -                          | CM_FCLKEN_PER_EN_GPIO3_ENABLE

> -                          | CM_FCLKEN_PER_EN_GPIO4_ENABLE

> -                          | CM_FCLKEN_PER_EN_GPIO5_ENABLE

> -                          | CM_FCLKEN_PER_EN_GPIO6_ENABLE);

> -  MmioOr32(CM_ICLKEN_PER, CM_ICLKEN_PER_EN_UART3_ENABLE

> -                          | CM_ICLKEN_PER_EN_GPT3_ENABLE

> -                          | CM_ICLKEN_PER_EN_GPT4_ENABLE

> -                          | CM_ICLKEN_PER_EN_GPIO2_ENABLE

> -                          | CM_ICLKEN_PER_EN_GPIO3_ENABLE

> -                          | CM_ICLKEN_PER_EN_GPIO4_ENABLE

> -                          | CM_ICLKEN_PER_EN_GPIO5_ENABLE

> -                          | CM_ICLKEN_PER_EN_GPIO6_ENABLE);

> -

> -  // Turn on functional & inteface clocks to various wakeup modules.

> -  MmioOr32(CM_FCLKEN_WKUP, CM_FCLKEN_WKUP_EN_GPIO1_ENABLE

> -                           | CM_FCLKEN_WKUP_EN_WDT2_ENABLE);

> -  MmioOr32(CM_ICLKEN_WKUP, CM_ICLKEN_WKUP_EN_GPIO1_ENABLE

> -                           | CM_ICLKEN_WKUP_EN_WDT2_ENABLE);

> -}

> diff --git a/BeagleBoardPkg/Sec/LzmaDecompress.h b/BeagleBoardPkg/Sec/LzmaDecompress.h

> deleted file mode 100644

> index a79ff343d231..000000000000

> --- a/BeagleBoardPkg/Sec/LzmaDecompress.h

> +++ /dev/null

> @@ -1,103 +0,0 @@

> -/** @file

> -  LZMA Decompress Library header file

> -

> -  Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>

> -  This program and the accompanying materials

> -  are licensed and made available under the terms and conditions of the BSD License

> -  which accompanies this distribution.  The full text of the license may be found at

> -  http://opensource.org/licenses/bsd-license.php

> -

> -  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

> -  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

> -

> -**/

> -

> -#ifndef __LZMA_DECOMPRESS_H___

> -#define __LZMA_DECOMPRESS_H___

> -

> -/**

> -  Examines a GUIDed section and returns the size of the decoded buffer and the

> -  size of an scratch buffer required to actually decode the data in a GUIDed section.

> -

> -  Examines a GUIDed section specified by InputSection.

> -  If GUID for InputSection does not match the GUID that this handler supports,

> -  then RETURN_UNSUPPORTED is returned.

> -  If the required information can not be retrieved from InputSection,

> -  then RETURN_INVALID_PARAMETER is returned.

> -  If the GUID of InputSection does match the GUID that this handler supports,

> -  then the size required to hold the decoded buffer is returned in OututBufferSize,

> -  the size of an optional scratch buffer is returned in ScratchSize, and the Attributes field

> -  from EFI_GUID_DEFINED_SECTION header of InputSection is returned in SectionAttribute.

> -

> -  If InputSection is NULL, then ASSERT().

> -  If OutputBufferSize is NULL, then ASSERT().

> -  If ScratchBufferSize is NULL, then ASSERT().

> -  If SectionAttribute is NULL, then ASSERT().

> -

> -

> -  @param[in]  InputSection       A pointer to a GUIDed section of an FFS formatted file.

> -  @param[out] OutputBufferSize   A pointer to the size, in bytes, of an output buffer required

> -                                 if the buffer specified by InputSection were decoded.

> -  @param[out] ScratchBufferSize  A pointer to the size, in bytes, required as scratch space

> -                                 if the buffer specified by InputSection were decoded.

> -  @param[out] SectionAttribute   A pointer to the attributes of the GUIDed section. See the Attributes

> -                                 field of EFI_GUID_DEFINED_SECTION in the PI Specification.

> -

> -  @retval  RETURN_SUCCESS            The information about InputSection was returned.

> -  @retval  RETURN_UNSUPPORTED        The section specified by InputSection does not match the GUID this handler supports.

> -  @retval  RETURN_INVALID_PARAMETER  The information can not be retrieved from the section specified by InputSection.

> -

> -**/

> -RETURN_STATUS

> -EFIAPI

> -LzmaGuidedSectionGetInfo (

> -  IN  CONST VOID  *InputSection,

> -  OUT UINT32      *OutputBufferSize,

> -  OUT UINT32      *ScratchBufferSize,

> -  OUT UINT16      *SectionAttribute

> -  );

> -

> -/**

> -  Decompress a LZAM compressed GUIDed section into a caller allocated output buffer.

> -

> -  Decodes the GUIDed section specified by InputSection.

> -  If GUID for InputSection does not match the GUID that this handler supports, then RETURN_UNSUPPORTED is returned.

> -  If the data in InputSection can not be decoded, then RETURN_INVALID_PARAMETER is returned.

> -  If the GUID of InputSection does match the GUID that this handler supports, then InputSection

> -  is decoded into the buffer specified by OutputBuffer and the authentication status of this

> -  decode operation is returned in AuthenticationStatus.  If the decoded buffer is identical to the

> -  data in InputSection, then OutputBuffer is set to point at the data in InputSection.  Otherwise,

> -  the decoded data will be placed in caller allocated buffer specified by OutputBuffer.

> -

> -  If InputSection is NULL, then ASSERT().

> -  If OutputBuffer is NULL, then ASSERT().

> -  If ScratchBuffer is NULL and this decode operation requires a scratch buffer, then ASSERT().

> -  If AuthenticationStatus is NULL, then ASSERT().

> -

> -

> -  @param[in]  InputSection  A pointer to a GUIDed section of an FFS formatted file.

> -  @param[out] OutputBuffer  A pointer to a buffer that contains the result of a decode operation.

> -  @param[out] ScratchBuffer A caller allocated buffer that may be required by this function

> -                            as a scratch buffer to perform the decode operation.

> -  @param[out] AuthenticationStatus

> -                            A pointer to the authentication status of the decoded output buffer.

> -                            See the definition of authentication status in the EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI

> -                            section of the PI Specification. EFI_AUTH_STATUS_PLATFORM_OVERRIDE must

> -                            never be set by this handler.

> -

> -  @retval  RETURN_SUCCESS            The buffer specified by InputSection was decoded.

> -  @retval  RETURN_UNSUPPORTED        The section specified by InputSection does not match the GUID this handler supports.

> -  @retval  RETURN_INVALID_PARAMETER  The section specified by InputSection can not be decoded.

> -

> -**/

> -RETURN_STATUS

> -EFIAPI

> -LzmaGuidedSectionExtraction (

> -  IN CONST  VOID    *InputSection,

> -  OUT       VOID    **OutputBuffer,

> -  OUT       VOID    *ScratchBuffer,        OPTIONAL

> -  OUT       UINT32  *AuthenticationStatus

> -  );

> -

> -#endif // __LZMADECOMPRESS_H__

> -

> diff --git a/BeagleBoardPkg/Sec/PadConfiguration.c b/BeagleBoardPkg/Sec/PadConfiguration.c

> deleted file mode 100644

> index 2dace3bf38b4..000000000000

> --- a/BeagleBoardPkg/Sec/PadConfiguration.c

> +++ /dev/null

> @@ -1,282 +0,0 @@

> -/** @file

> -

> -  Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

> -

> -  This program and the accompanying materials

> -  are licensed and made available under the terms and conditions of the BSD License

> -  which accompanies this distribution.  The full text of the license may be found at

> -  http://opensource.org/licenses/bsd-license.php

> -

> -  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

> -  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

> -

> -**/

> -

> -#include <PiPei.h>

> -#include <Library/IoLib.h>

> -#include <Library/DebugLib.h>

> -#include <Omap3530/Omap3530.h>

> -

> -#define NUM_PINS 238

> -

> -PAD_CONFIGURATION PadConfigurationTable[NUM_PINS] = {

> -  //Pin,           MuxMode,    PullConfig,                      InputEnable

> -  { SDRC_D0,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D1,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D2,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D3,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D4,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D5,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D6,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D7,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D8,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D9,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D10,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D11,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D12,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D13,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D14,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D15,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D16,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D17,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D18,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D19,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D20,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D21,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D22,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D23,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D24,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D25,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D26,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D27,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D28,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D29,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D30,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_D31,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_CLK,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_DQS0,     MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_CKE0,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { SDRC_CKE1,     MUXMODE7,   PULL_DISABLED,                INPUT  },

> -  { SDRC_DQS1,     MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_DQS2,     MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { SDRC_DQS3,     MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_A1,       MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_A2,       MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_A3,       MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_A4,       MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_A5,       MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_A6,       MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_A7,       MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_A8,       MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_A9,       MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_A10,      MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_D0,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D1,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D2,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D3,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D4,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D5,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D6,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D7,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D8,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D9,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D10,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D11,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D12,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D13,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D14,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_D15,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_NCS0,     MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_NCS1,     MUXMODE0,   PULL_UP_SELECTED,             OUTPUT },

> -  { GPMC_NCS2,     MUXMODE0,   PULL_UP_SELECTED,             OUTPUT },

> -  { GPMC_NCS3,     MUXMODE0,   PULL_UP_SELECTED,             OUTPUT },

> -  { GPMC_NCS4,     MUXMODE0,   PULL_UP_SELECTED,             OUTPUT },

> -  { GPMC_NCS5,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_NCS6,     MUXMODE1,   PULL_DISABLED,                INPUT  },

> -  { GPMC_NCS7,     MUXMODE1,   PULL_UP_SELECTED,             INPUT  },

> -  { GPMC_CLK,      MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_NADV_ALE, MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_NOE,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_NWE,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_NBE0_CLE, MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { GPMC_NBE1,     MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_NWP,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { GPMC_WAIT0,    MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { GPMC_WAIT1,    MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { GPMC_WAIT2,    MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { GPMC_WAIT3,    MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { DSS_PCLK,      MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_HSYNC,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_PSYNC,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_ACBIAS,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA0,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA1,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA2,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA3,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA4,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA5,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA6,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA7,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA8,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA9,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA10,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA11,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA12,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA13,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA14,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA15,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA16,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA17,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA18,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA19,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA20,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA21,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA22,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { DSS_DATA23,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { CAM_HS,        MUXMODE0,   PULL_UP_SELECTED,             INPUT },

> -  { CAM_VS,        MUXMODE0,   PULL_UP_SELECTED,             INPUT },

> -  { CAM_XCLKA,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { CAM_PCLK,      MUXMODE0,   PULL_UP_SELECTED,             INPUT },

> -  { CAM_FLD,       MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { CAM_D0,        MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CAM_D1,        MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CAM_D2,        MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CAM_D3,        MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CAM_D4,        MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CAM_D5,        MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CAM_D6,        MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CAM_D7,        MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CAM_D8,        MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CAM_D9,        MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CAM_D10,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CAM_D11,       MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CAM_XCLKB,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { CAM_WEN,       MUXMODE4,   PULL_DISABLED,                INPUT  },

> -  { CAM_STROBE,    MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { CSI2_DX0,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CSI2_DY0,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CSI2_DX1,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { CSI2_DY1,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { MCBSP2_FSX,    MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { MCBSP2_CLKX,   MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { MCBSP2_DR,     MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { MCBSP2_DX,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { MMC1_CLK,      MUXMODE0,   PULL_UP_SELECTED,             OUTPUT },

> -  { MMC1_CMD,      MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC1_DAT0,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC1_DAT1,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC1_DAT2,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC1_DAT3,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC1_DAT4,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC1_DAT5,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC1_DAT6,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC1_DAT7,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC2_CLK,      MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC2_CMD,      MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC2_DAT0,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC2_DAT1,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC2_DAT2,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC2_DAT3,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC2_DAT4,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC2_DAT5,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC2_DAT6,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { MMC2_DAT7,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { MCBSP3_DX,     MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { MCBSP3_DR,     MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { MCBSP3_CLKX,   MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { MCBSP3_FSX,    MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { UART2_CTS,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { UART2_RTS,     MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { UART2_TX,      MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { UART2_RX,      MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { UART1_TX,      MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { UART1_RTS,     MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { UART1_CTS,     MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { UART1_RX,      MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { MCBSP4_CLKX,   MUXMODE1,   PULL_DISABLED,                INPUT  },

> -  { MCBSP4_DR,     MUXMODE1,   PULL_DISABLED,                INPUT  },

> -  { MCBSP4_DX,     MUXMODE1,   PULL_DISABLED,                INPUT  },

> -  { MCBSP4_FSX,    MUXMODE1,   PULL_DISABLED,                INPUT  },

> -  { MCBSP1_CLKR,   MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { MCBSP1_FSR,    MUXMODE4,   PULL_UP_SELECTED,             OUTPUT },

> -  { MCBSP1_DX,     MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { MCBSP1_DR,     MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { MCBSP1_CLKS,   MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { MCBSP1_FSX,    MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { MCBSP1_CLKX,   MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { UART3_CTS_RCTX,MUXMODE0,   PULL_UP_SELECTED,                 INPUT  },

> -  { UART3_RTS_SD,  MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { UART3_RX_IRRX, MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { UART3_TX_IRTX, MUXMODE0,   PULL_DISABLED,                OUTPUT },

> -  { HSUSB0_CLK,    MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { HSUSB0_STP,    MUXMODE0,   PULL_UP_SELECTED,             OUTPUT },

> -  { HSUSB0_DIR,    MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { HSUSB0_NXT,    MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { HSUSB0_DATA0,  MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { HSUSB0_DATA1,  MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { HSUSB0_DATA2,  MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { HSUSB0_DATA3,  MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { HSUSB0_DATA4,  MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { HSUSB0_DATA5,  MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { HSUSB0_DATA6,  MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { HSUSB0_DATA7,  MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { I2C1_SCL,      MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { I2C1_SDA,      MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { I2C2_SCL,      MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { I2C2_SDA,      MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { I2C3_SCL,      MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { I2C3_SDA,      MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { HDQ_SIO,       MUXMODE4,   PULL_UP_SELECTED,             OUTPUT },

> -  { MCSPI1_CLK,    MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { MCSPI1_SIMO,   MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { MCSPI1_SOMI,   MUXMODE0,   PULL_DISABLED,                INPUT  },

> -  { MCSPI1_CS0,    MUXMODE0,   PULL_UP_SELECTED,                 INPUT  },

> -  { MCSPI1_CS1,    MUXMODE0,   PULL_UP_SELECTED,                 OUTPUT },

> -  { MCSPI1_CS2,    MUXMODE4,   PULL_DISABLED,                OUTPUT },

> -  { MCSPI1_CS3,    MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { MCSPI2_CLK,    MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { MCSPI2_SIMO,   MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { MCSPI2_SOMI,   MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { MCSPI2_CS0,    MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { MCSPI2_CS1,    MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { SYS_NIRQ,      MUXMODE0,   PULL_UP_SELECTED,             INPUT  },

> -  { SYS_CLKOUT2,   MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_CLK,       MUXMODE3,   PULL_UP_SELECTED,             OUTPUT },

> -  { ETK_CTL,       MUXMODE3,   PULL_UP_SELECTED,             OUTPUT },

> -  { ETK_D0,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D1,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D2,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D3,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D4,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D5,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D6,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D7,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D8,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D9,        MUXMODE4,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D10,       MUXMODE3,   PULL_UP_SELECTED,             OUTPUT },

> -  { ETK_D11,       MUXMODE3,   PULL_UP_SELECTED,             OUTPUT },

> -  { ETK_D12,       MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D13,       MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D14,       MUXMODE3,   PULL_UP_SELECTED,             INPUT  },

> -  { ETK_D15,       MUXMODE3,   PULL_UP_SELECTED,             INPUT  }

> -};

> -

> -VOID

> -PadConfiguration (

> -  VOID

> -  )

> -{

> -  UINTN  Index;

> -  UINT16 PadConfiguration;

> -  UINTN  NumPinsToConfigure = sizeof(PadConfigurationTable)/sizeof(PAD_CONFIGURATION);

> -

> -  for (Index = 0; Index < NumPinsToConfigure; Index++) {

> -    //Set up Pad configuration for particular pin.

> -    PadConfiguration =  (PadConfigurationTable[Index].MuxMode << MUXMODE_OFFSET);

> -    PadConfiguration |= (PadConfigurationTable[Index].PullConfig << PULL_CONFIG_OFFSET);

> -    PadConfiguration |= (PadConfigurationTable[Index].InputEnable << INPUTENABLE_OFFSET);

> -

> -    //Configure the pin with specific Pad configuration.

> -    MmioWrite16(PadConfigurationTable[Index].Pin, PadConfiguration);

> -  }

> -}

> diff --git a/BeagleBoardPkg/Sec/Sec.c b/BeagleBoardPkg/Sec/Sec.c

> deleted file mode 100644

> index 0708396d9792..000000000000

> --- a/BeagleBoardPkg/Sec/Sec.c

> +++ /dev/null

> @@ -1,186 +0,0 @@

> -/** @file

> -  C Entry point for the SEC. First C code after the reset vector.

> -

> -  Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

> -

> -  This program and the accompanying materials

> -  are licensed and made available under the terms and conditions of the BSD License

> -  which accompanies this distribution.  The full text of the license may be found at

> -  http://opensource.org/licenses/bsd-license.php

> -

> -  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

> -  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

> -

> -**/

> -

> -#include <PiPei.h>

> -

> -#include <Library/DebugLib.h>

> -#include <Library/PrePiLib.h>

> -#include <Library/PcdLib.h>

> -#include <Library/IoLib.h>

> -#include <Library/OmapLib.h>

> -#include <Library/ArmLib.h>

> -#include <Library/PeCoffGetEntryPointLib.h>

> -#include <Library/DebugAgentLib.h>

> -

> -#include <Ppi/GuidedSectionExtraction.h>

> -#include <Guid/LzmaDecompress.h>

> -#include <Omap3530/Omap3530.h>

> -

> -#include "LzmaDecompress.h"

> -

> -VOID

> -PadConfiguration (

> -  VOID

> -  );

> -

> -VOID

> -ClockInit (

> -  VOID

> -  );

> -

> -

> -VOID

> -TimerInit (

> -  VOID

> -  )

> -{

> -  UINTN  Timer            = FixedPcdGet32(PcdOmap35xxFreeTimer);

> -  UINT32 TimerBaseAddress = TimerBase(Timer);

> -

> -  // Set source clock for GPT3 & GPT4 to SYS_CLK

> -  MmioOr32 (CM_CLKSEL_PER, CM_CLKSEL_PER_CLKSEL_GPT3_SYS | CM_CLKSEL_PER_CLKSEL_GPT4_SYS);

> -

> -  // Set count & reload registers

> -  MmioWrite32 (TimerBaseAddress + GPTIMER_TCRR, 0x00000000);

> -  MmioWrite32 (TimerBaseAddress + GPTIMER_TLDR, 0x00000000);

> -

> -  // Disable interrupts

> -  MmioWrite32 (TimerBaseAddress + GPTIMER_TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_DISABLE | TIER_MAT_IT_DISABLE);

> -

> -  // Start Timer

> -  MmioWrite32 (TimerBaseAddress + GPTIMER_TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON);

> -

> -  //Disable OMAP Watchdog timer (WDT2)

> -  MmioWrite32 (WDTIMER2_BASE + WSPR, 0xAAAA);

> -  DEBUG ((EFI_D_ERROR, "Magic delay to disable watchdog timers properly.\n"));

> -  MmioWrite32 (WDTIMER2_BASE + WSPR, 0x5555);

> -}

> -

> -VOID

> -UartInit (

> -  VOID

> -  )

> -{

> -  UINTN   Uart            = FixedPcdGet32(PcdOmap35xxConsoleUart);

> -  UINT32  UartBaseAddress = UartBase(Uart);

> -

> -  // Set MODE_SELECT=DISABLE before trying to initialize or modify DLL, DLH registers.

> -  MmioWrite32 (UartBaseAddress + UART_MDR1_REG, UART_MDR1_MODE_SELECT_DISABLE);

> -

> -  // Put device in configuration mode.

> -  MmioWrite32 (UartBaseAddress + UART_LCR_REG, UART_LCR_DIV_EN_ENABLE);

> -

> -  // Programmable divisor N = 48Mhz/16/115200 = 26

> -  MmioWrite32 (UartBaseAddress + UART_DLL_REG, 3000000/FixedPcdGet64 (PcdUartDefaultBaudRate)); // low divisor

> -  MmioWrite32 (UartBaseAddress + UART_DLH_REG,  0); // high divisor

> -

> -  // Enter into UART operational mode.

> -  MmioWrite32 (UartBaseAddress + UART_LCR_REG, UART_LCR_DIV_EN_DISABLE | UART_LCR_CHAR_LENGTH_8);

> -

> -  // Force DTR and RTS output to active

> -  MmioWrite32 (UartBaseAddress + UART_MCR_REG, UART_MCR_RTS_FORCE_ACTIVE | UART_MCR_DTR_FORCE_ACTIVE);

> -

> -  // Clear & enable fifos

> -  MmioWrite32 (UartBaseAddress + UART_FCR_REG, UART_FCR_TX_FIFO_CLEAR | UART_FCR_RX_FIFO_CLEAR | UART_FCR_FIFO_ENABLE);

> -

> -  // Restore MODE_SELECT

> -  MmioWrite32 (UartBaseAddress + UART_MDR1_REG, UART_MDR1_MODE_SELECT_UART_16X);

> -}

> -

> -VOID

> -InitCache (

> -  IN  UINT32  MemoryBase,

> -  IN  UINT32  MemoryLength

> -  );

> -

> -EFI_STATUS

> -EFIAPI

> -ExtractGuidedSectionLibConstructor (

> -  VOID

> -  );

> -

> -EFI_STATUS

> -EFIAPI

> -LzmaDecompressLibConstructor (

> -  VOID

> -  );

> -

> -

> -VOID

> -CEntryPoint (

> -  IN  VOID  *MemoryBase,

> -  IN  UINTN MemorySize,

> -  IN  VOID  *StackBase,

> -  IN  UINTN StackSize

> -  )

> -{

> -  VOID *HobBase;

> -

> -  // Build a basic HOB list

> -  HobBase      = (VOID *)(UINTN)(FixedPcdGet32(PcdEmbeddedFdBaseAddress) + FixedPcdGet32(PcdEmbeddedFdSize));

> -  CreateHobList (MemoryBase, MemorySize, HobBase, StackBase);

> -

> -  //Set up Pin muxing.

> -  PadConfiguration ();

> -

> -  // Set up system clocking

> -  ClockInit ();

> -

> -

> -  // Enable program flow prediction, if supported.

> -  ArmEnableBranchPrediction ();

> -

> -  // Initialize CPU cache

> -  InitCache ((UINT32)MemoryBase, (UINT32)MemorySize);

> -

> -  // Add memory allocation hob for relocated FD

> -  BuildMemoryAllocationHob (FixedPcdGet32(PcdEmbeddedFdBaseAddress), FixedPcdGet32(PcdEmbeddedFdSize), EfiBootServicesData);

> -

> -  // Add the FVs to the hob list

> -  BuildFvHob (PcdGet32(PcdFlashFvMainBase), PcdGet32(PcdFlashFvMainSize));

> -

> -  // Start talking

> -  UartInit ();

> -

> -  InitializeDebugAgent (DEBUG_AGENT_INIT_PREMEM_SEC, NULL, NULL);

> -  SaveAndSetDebugTimerInterrupt (TRUE);

> -

> -  DEBUG ((EFI_D_ERROR, "UART Enabled\n"));

> -

> -  // Start up a free running timer so that the timer lib will work

> -  TimerInit ();

> -

> -  // SEC phase needs to run library constructors by hand.

> -  ExtractGuidedSectionLibConstructor ();

> -  LzmaDecompressLibConstructor ();

> -

> -  // Build HOBs to pass up our version of stuff the DXE Core needs to save space

> -  BuildPeCoffLoaderHob ();

> -  BuildExtractSectionHob (

> -    &gLzmaCustomDecompressGuid,

> -    LzmaGuidedSectionGetInfo,

> -    LzmaGuidedSectionExtraction

> -    );

> -

> -  // Assume the FV that contains the SEC (our code) also contains a compressed FV.

> -  DecompressFirstFv ();

> -

> -  // Load the DXE Core and transfer control to it

> -  LoadDxeCoreFromFv (NULL, 0);

> -

> -  // DXE Core should always load and never return

> -  ASSERT (FALSE);

> -}

> -

> diff --git a/BeagleBoardPkg/Sec/Sec.inf b/BeagleBoardPkg/Sec/Sec.inf

> deleted file mode 100644

> index eb6d93c000bb..000000000000

> --- a/BeagleBoardPkg/Sec/Sec.inf

> +++ /dev/null

> @@ -1,73 +0,0 @@

> -

> -#/** @file

> -#  SEC - Reset vector code that jumps to C and loads DXE core

> -#

> -#  Copyright (c) 2008, Apple Inc. All rights reserved.<BR>

> -#  This program and the accompanying materials

> -#  are licensed and made available under the terms and conditions of the BSD License

> -#  which accompanies this distribution.  The full text of the license may be found at

> -#  http://opensource.org/licenses/bsd-license.php

> -#

> -#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

> -#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

> -#

> -#**/

> -

> -[Defines]

> -  INF_VERSION                    = 0x00010005

> -  BASE_NAME                      = BeagleBoardSec

> -  FILE_GUID                      = d959e387-7b91-452c-90e0-a1dbac90ddb8

> -  MODULE_TYPE                    = SEC

> -  VERSION_STRING                 = 1.0

> -

> -

> -[Sources.ARM]

> -  Arm/ModuleEntryPoint.S   | GCC

> -  Arm/ModuleEntryPoint.asm | RVCT

> -

> -[Sources.ARM]

> -  Sec.c

> -  Cache.c

> -  PadConfiguration.c

> -  Clock.c

> -

> -[Packages]

> -  MdePkg/MdePkg.dec

> -  MdeModulePkg/MdeModulePkg.dec

> -  EmbeddedPkg/EmbeddedPkg.dec

> -  ArmPkg/ArmPkg.dec

> -  Omap35xxPkg/Omap35xxPkg.dec

> -  IntelFrameworkModulePkg/IntelFrameworkModulePkg.dec

> -

> -[LibraryClasses]

> -  BaseLib

> -  DebugLib

> -  ArmLib

> -  IoLib

> -  ExtractGuidedSectionLib

> -  LzmaDecompressLib

> -  OmapLib

> -  PeCoffGetEntryPointLib

> -  DebugAgentLib

> -  MemoryAllocationLib

> -  PrePiHobListPointerLib

> -

> -[FeaturePcd]

> -  gEmbeddedTokenSpaceGuid.PcdCacheEnable

> -

> -[FixedPcd]

> -  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate

> -  gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress

> -  gEmbeddedTokenSpaceGuid.PcdEmbeddedFdSize

> -  gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase

> -  gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize

> -  gEmbeddedTokenSpaceGuid.PcdPrePiStackSize

> -  gEmbeddedTokenSpaceGuid.PcdPrePiStackBase

> -  gEmbeddedTokenSpaceGuid.PcdMemoryBase

> -  gEmbeddedTokenSpaceGuid.PcdMemorySize

> -

> -  gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart

> -  gOmap35xxTokenSpaceGuid.PcdOmap35xxFreeTimer

> -

> -  gArmTokenSpaceGuid.PcdCpuVectorBaseAddress

> -

> -- 

> 2.7.4

> 

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel